Touchpoint Pro Input/Output Modules Specifications
|
|
- Jocelin Carroll
- 5 years ago
- Views:
Transcription
1 Specifications Common Specifications Common Specifications Dimensions 35.0 mm x 99.5 mm x mm (W x H x D) Installation 5, 7, 9 or 10-way Communication / Power Rail Maximum Wire Size 2.5 mm 2 IP Rating IP20 EMC EN Power Supply Vdc (24 Vdc nominal) DIN Rail Compatibility TS-35 / 15 Casing Material Polyamide PA 6.6 V0 (UL94) Operating Temperature Range -40 C to 65 C Storage Conditions -40 C to 65 C Operating Humidity Range 10 to 90% RH (non-condensing) Weight 210 g Environmental Protection Class Pollution Degree 2 (indoor sheltered) Analogue Input Module ma Analogue Input Module ma Sensor Configuration Measurement Range Supply Voltage (Vs) Field Device Supply Voltage Single Channel Field Device Supply Current Total Field Device Supply Current Sense Resistance 4-channel 4-20 ma Analogue Input Module with 2 or 3 wire interface to detector 4 x 2-wire or 3-wire (current sourced from detector) 0-25 ma Supply Voltage (Vs) 0.7 V Maximum 1 A Total Maximum current : 2 A at 65 C ambient Total Maximum current : 4 A at 55 C ambient 0.8 W (Excluding sensor supply) Maximum 3.7 W, at 4 A total field device load Maximum 2.1 W, at 2 A total field device load 101 Ω Analogue Input Module connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring Maximum Current: 4.04 A (18-32 Vdc)
2 Terminal Identification Label Channel Field Device 1 +V 2 SIG Input 1 3 -V 4 +V 5 SIG Input 2 6 -V 7 +V 8 SIG Input 3 9 -V 10 +V 11 SIG Input V 3 Wire Detector Touchpoint Pro +V 2 Wire Detector Touchpoint Pro + +V 4-20 ma SIG 4-20 ma SIG Three wire device -V 101 Ω -V 101 Ω Two wire loop powered device 2 Wire Detector Barrier Touchpoint Pro +V 4-20 ma SIG -V 101 Ω Two wire device with a barrier
3 Analogue Input Module mv Analogue Input Module mv Electrical Connection Supply Voltage Sensor Drive method Programmable Current Range Maximum Loop Resistance Input Range 4-channel Analogue Input Module for Catalytic Bridge sensors 4 x 3-wire mv-bridge Constant current ma Total Maximum loop resistance: 40 Ω at 200 ma (including Sensor) Total Maximum loop resistance: 27 Ω at 360 ma (including Sensor) ±15 mv to ±600 mv Maximum 1.2 W (Excluding Sensors) Maximum 3.5 W Analogue Input Module connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring Maximum Current: 1.1 A (18-32 Vdc) Terminal Identification Label Channel Field Device 1 S 2 01 Input 1 3 NS Non-sensitive (-) 4 S 5 01 Input 2 6 NS Non-sensitive (-) 7 S 8 01 Input 3 9 NS Non-sensitive (-) 10 S Input 4 12 NS Non-sensitive (-) Catalytic Detector Touchpoint Pro + S S S 01 NS _ NS Catalytic Detector
4 Digital Input Module Digital Input Module Electrical Connection Supply Voltage 4-Channel Digital Input Module for switched input devices 4 x 2-wire Switch Inputs 1 W maximum (no inputs connected) 2.8 W maximum Field Terminals (TB1-TB4) Ratings Maximum current of 14 ma through switched input device at Vdc EOL (End Of Line) Resistance 10 kω, 0.25 W, ±1% INL (In-Line) Resistance 2.7 kω, 0.25 W, ±1% Switch Input Device supply Voltage (Vs) Switch Input Device supply Current (Is) Minimum 15 V Maximum 32 V Minimum 5 ma for Supervised OC/SC Switch ON condition Maximum 14 ma for Unsupervised Switch ON condition Digital Input Module connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring Maximum Current: 95 ma (18-32 Vdc) Terminal Identification Label Channel Input 1 Input 2 Input 3 Input 4 TPPR TPPR TPPR 1 KΩ + 1 KΩ + 1 KΩ SWITCH - 75 Ω R EOL 10 KΩ SWITCH - 75 Ω R EOL 10 KΩ R INL 2.7 KΩ SWITCH - Unsupervised configuration Supervised for open circuit configuration Supervised for open and short circuit configuration 75 Ω
5 Relay Output Module Relay Output Module Electrical Connection Supply Voltage (Vs) Auxiliary Supply Voltage Auxiliary Supply Current Relay Contacts (TB1-TB4) 4-channel Relay Output Module incorporating 4 single pole change over (SPCO) relays and 24 Vdc Auxiliary Power Output 4 x SPCO Relay Terminals (TB1 to TB4) 4 x 2-wire Auxiliary Output Terminals (TB5 to TB8) Supply Voltage (Vs) 0.7 V Maximum 1.5 A Maximum 1.5 W (excluding auxiliary power consumption) Maximum 2.3 W Maximum 5 A through one relay contact at 250 Vac / 3 (non-inductive) Maximum 8 A total through all four relay contacts at 250 Vac / 3 (non-inductive) Minimum 12 Vdc, 10 ma Relay output connectors (TB1-TB4) and auxiliary output connectors (TB5-TB8) are coded with coding keys to avoid mis-wiring. The relay output connectors (TB1-TB4) are coloured black to identify them for AC supply wiring Maximum Current: 1.62 A (18-32 Vdc) Terminal Identification Label Channel 1 NO 2 NC Relay 1 3 C 4 NO 5 NC Relay 2 6 C 7 NO 8 NC Relay 3 9 C 10 NO 11 NC Relay 4 12 C V V Aux V V V Aux V V V Aux V V V Aux V Touchpoint Pro VAux+ VAux- NO NC C ROM connection
6 Input and Output Modules (I/O Modules) Power Supplies TPPR-V-1000 TPPR-V-1010 TPPR-V-1030 TPPR-V-1040 Analogue Input Module 4-20mA Analogue Input Module mv-bridge Digital Input Module Relay Output Module
7 Gas Detection is able to provide gas detection solutions to meet the requirements of all applications and industries. Contact us in the following ways: Headquarters Europe, Middle East, Africa Life Safety Distribution AG Javastrasse Hegnau Switzerland Tel: +41 (0) Fax: +41 (0) gasdetection@honeywell.com Customer Service: Tel: (Freephone number) Tel: (Alternative number) Fax: Middle East Tel: (Fixed Gas Detection) Middle East Tel: (Portable Gas Detection) Americas Distribution Inc. 405 Barclay Blvd. Lincolnshire, IL USA Tel: Toll free: Fax: detectgas@honeywell.com Asia Pacific Asia Pacific #701 Kolon Science Valley (1) 43 Digital-Ro 34-Gil, Guro-Gu Seoul Korea Tel: +82 (0) Fax: +82 (0) India Tel: analytics.ap@honeywell.com Technical Support Centres Ltd. 4 Stinsford Road Nuffield Industrial Estate Poole, Dorset, BH17 0RZ United Kingdom Tel: +44 (0) Fax: +44 (0) ZAC Athélia avenue du Mistral Bât B, Espace Mistral La Ciotat France Tel: +33 (0) Fax : +33 (0) Elsenheimerstrasse München Germany Tel: Fax: P.O. Box th Street Musaffah Industrial Area Abu Dhabi UAE Tel: Fax: EMEA: HAexpert@honeywell.com US: ha.us.service@honeywell.com AP: ha.ap.service@honeywell.com Experts in Gas Detection Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract _TPPR Spec Sheet_ V1_10/14_EMEAI 2014
User Guide SS4-A HART
User Guide SS4-A HART Page 1 of 14 Revision History Author Revision Date Comments T. Lapp A April 19, 2013 Initial release Page 2 of 14 Table of Contents 1 Introduction... 4 2 4-20 ma of SS4... 4 3 Supported
More informationInstallation Instructions
Installation Instructions System 57 (EIS) Help us to help you Copyright This software is the copyright of Honeywell Analytics Limited. Users must not copy or distribute, reverse engineer or otherwise misuse
More informationDTM User Manual. Searchpoint Optima Plus Infrared Gas Detector HART
DTM User Manual Searchpoint Optima Plus Infrared Gas Detector HART Content 1 Introduction... 1 2 Software installation... 2 2.1 Required software / software components... 2 2.2 Downloads... 2 2.2.1 PACTware...
More informationAmericas Honeywell Analytics Distribution Inc. Tel: Toll free: Fax:
Product ProRAE Studio II Version V1.11.2 Operating Systems Windows 7(x86 and x64), Windows 8(x86 and x64), Windows 10 Release Date February 2017 All users should update their existing ProRAE Studio II
More informationDTM User Manual. XNX TM Universal Transmitter HART
DTM User Manual XNX TM Universal Transmitter HART Content 1 Introduction... 1 2 Software installation... 2 2.1 Required software / software components... 2 2.2 Downloads... 2 2.2.1 PACTware and.net 2.0...
More informationMeasuring transducers MI4x0 series Programmable transducers for RTD sensors MI450
Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 o Measuring of resistance of RTD sensors (Pt100, Pt1000, Ni100, Cu10,...) o Accuracy class up to: 0.5 o Programmable input
More informationDelta Multifunction Pressure Sensor DPA Series
Automation for a Changing World Delta Multifunction Pressure Sensor DPA Series www.deltaww.com Multifunction Pressure Sensor DPA Series Energy-saving mode Various unit conversion function Various output
More informationPriva Blue ID Digital input module DI4/DI8/DI16
Priva Blue ID Digital input module Modular design An Priva Blue ID DI4 Digital input module, Priva Blue ID DI8 Digital input module or Priva Blue ID DI16 Digital input module are used to take status and
More informationIQ21x Series Controllers
IQ1x Series Controllers IQ1x SERIES CONTROLLERS Description Features The IQ1x series of intelligent controllers are designed for use as unitary controllers in building control systems. Full compatibility
More informationPriva Blue ID C-Line Mix input/output module MX34
Priva Blue ID CLine Mix input/output module Power supply output The module is equipped with a 24 VDC power supply output. The power supply output can be used to supply external devices, such as a TouchPoint.
More informationMODULES FOR SAFETY AND MONITORING
MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-43 Muttenz, Switzerland Tel. ++4 6 / 466 33 33, Fax ++4 6 / 46 96 06 http://www.woertz.ch Woertz-USA 5 Discovery Drive,
More informationDigital Output Module 4-Channel Version for Zone 1 Series 9475/
www.stahl.de > 4-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Additional Ex i control input for "Plant STOP" (acc. IEC61508 up to SIL2) >
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationDigital Output Module 8-Channel Version for Zone 2 Series 9475/
> 8-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Line fault monitoring per channel > Diagnostics based on NE107 > Module can be replaced in
More informationSafety control unit B1 / B1. for 2 to 16 machine safety sensors. Use. Types. + PLd according to EN ISO
Safety control unit for 2 to 16 machine safety sensors 470 121 B1 / 470 125 B1 + PLd according to EN ISO 13849-1 + two safety outputs and external contactor monitoring + for sensors with N.O./N.C. system
More informationHI SEC Integrated Systems
Service Note 145 HI SEC Integrated Systems Subject: New S-ART 2xx Range Ref. No.: 93014501 Service Note 145 Summary: This Service Note describes a new enhanced range of S-ART s which will replace the existing
More informationDigital Output Module 4-Channel Version for Zone 1 Series 9475/
www.stahl.de > 4-channel digital output > Intrinsically safe outputs Ex ib > Suitable for Ex i hydraulic valves and solenoid valves > Additional Ex i control input for (in accordance with IEC 61508 through
More informationPHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
More informationDigital Output Module 8-Channel Version for Zone 1 Series 9475/
www.stahl.de > 8-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Additional Ex i control input for "Plant STOP" (acc. IEC61508 up to SIL2) >
More informationNPort W2150A/W2250A Series Quick Installation Guide
NPort W2150A/W2250A Series Quick Installation Guide Edition 6.1, September 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax:
More informationPriva Blue ID Analogue output module with manual override AO2m/AO4m
Priva Blue ID Analogue output module with manual override Short circuit proof and self-restoring The module's analog outputs are self-restoring after a brief short-circuit or overload. After a brief short-circuit
More informationPriva Blue ID Relay output module DOR4/DOR8
Priva Blue ID Relay output module Modular design Module and base form a unique combination. As a result of this, a module cannot be incorrectly positioned in a base. You simply click the base with module
More informationDatasheet DE DB_EN_DE45_LCD Rev. ST4-G 11/17. Digital differential pressure switch / transmitter with colour-change LCD * *
09005351 DB_EN_DE45_LCD Rev. ST4-G 11/17 *09005351* Datasheet DE45 Digital differential pressure switch / transmitter with colour-change LCD 1 Product and functional description FISCHER Mess- und Regeltechnik
More informationDatasheet DE DB_EN_DE44_LCD Rev. ST4-C 07/17. Digital 2-channel differential pressure switch/transmitter with colour-change LCD * *
09005318 DB_EN_DE44_LCD Rev. ST4-C 07/17 *09005318* Datasheet DE44 Digital 2-channel differential pressure switch/transmitter with colour-change LCD 1 Product and functional description FISCHER Mess- und
More informationDOR6. Components All functions and indications are on the front of the module. Characteristics
Priva Blue ID C-Line Relay output module Easy installation You simply click the module onto the DIN rail. The wiring connects to the module via spring terminals or screw connectors (optional). The module
More informationPriva Blue ID Communication module RS485 SC44
Priva Blue ID Communication module RS485 Modular design An Priva Blue ID Communication module RS485 provides the system with two RS485 ports for serial communication and is used to connect field bus devices.
More informationFor full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
More informationData sheet ACT20P ACT20P-CMT-10-AO-RC-S. Phone: Fax: Web: - [!
-CMT-10-AO-RC-S [!-] General ordering data Type -CMT-10-AO-RC-S Order No. 1510470000 Version Current-measuring transducer GTIN (EAN) 4050118319583 Qty. 1 pc(s). -CMT-10-AO-RC-S Technical data Dimensions
More informationDigital Output Module 8-Channel Version for Zone 2 Series 9475/
> 8-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Line fault monitoring per channel > Diagnostics based on NE107 > Module can be replaced in
More informationEasy Analog RNB130. Technical Information. Primary switched-mode power supply
Technical Information Easy Analog RNB130 Primary switched-mode power supply Your benefits Small housing, 35 mm (1.38") width High availability Wide range input - can be used world-wide Power reserve (Power
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationMODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)
Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast
More informationDeltaV SIS TMConditioning Components
February 2016 Page 1 DeltaV SIS TMConditioning Components The DeltaV SIS conditioning components allow you to use the DeltaV SIS system with a variety of different field signal requirements. Enables diagnostics
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More informationiologik 4000 Series (M) Modules
iologik 4000 Series (M) s Remote I/O modules Features and Benefits I/O expansion without a backplane Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy configuration with Modular ioadmin
More informations Climatix AHU ext. module 14 I/O POL955.XX/XXX Climatix
s 3 262 Climatix Climatix AHU ext. module 14 I/O POL955.XX/XXX POL955.XX/XXX is a versatile Climatix extension module that can be connected to any type of Climatix POL6xx controller. Its high level of
More informationProduct Specification. tsense VAV. CO 2 -, Temperature- and RH- sensor in a housing with colour touch display
Product Specification tsense VAV CO 2 -, Temperature- and RH- sensor in a housing with colour touch display General tsense VAV is an advanced and versatile 3-in-1 transmitter designed for installation
More informationDeltaV SIS Conditioning Components
DeltaV SIS Process Safety System DeltaV SIS Conditioning Components The DeltaV SIS conditioning components allow you to use the DeltaV SIS system with a variety of different field signal requirements.
More informationUPort TM 200/400 Series Quick Installation Guide
UPort TM 200/400 Series Quick Installation Guide Edition 4.0, November 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax:
More informationCVN300-96P01A SERIES. Five Output. Special Features
CVN300-96P01A SERIES Embedded Power for Business-Critical Continuity CVN300-96P01A SERIES 1 of 8 Total Power: W Input Voltage: VDC # of Outputs: 5 Special Features Server Systems Infrastructure (SSI) entry-level
More informationOperating Instructions. Isolation Relay for Switches Model: RL manual_rl-6100_1116
Operating Instructions Isolation Relay for Switches Model: RL-6100 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...3 5. Operating Principle...4 6. Mechanical Connection...4
More informationVertX. V100, V200 and V300. Installation Guide Barranca Parkway Irvine, CA USA. November Rev A.1
15370 Barranca Parkway Irvine, CA 92618 USA VertX V100, V200 and V300 Installation Guide November 2011 6080-930 Rev A.1. Contents Introduction... 3 Parts List... 3 Product Specifications... 3 Cable Specifications...
More informationRTT2 ROOM TEMPERATURE SWITCH. Mounting and operating instructions
Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS PRODUCT DESCRIPTION ARTICLE CODES INTENDED AREA OF USE TECHNICAL DATA STANDARDS OPERATIONAL DIAGRAMS WIRING AND CONNECTIONS
More informationOperating Instructions
Operating Instructions System 57 Total environmental solutions Ensure that you read and understand these instructions BEFORE operating the equipment. Please pay particular attention to the Safety Warnings.
More informationINSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3
INSTALLATION MANUAL LC 200 Electronic Overload Guard Software versione PW0501 R 0.3 CONTENTS MAIN FEATURES LC 200 TECHNICAL FEATURES Page 2 SYMBOLS Page 3 WARNINGS Page 3 IDENTIFICATION DATA PLATE Page
More informationThe PM1000 series is a universal 4 digit LED plug-on display for transmitters with 4-20mA 2 wire output and fitted with DIN43650 connector.
PM1000 SERIES PLUG-ON DISPLAY BRIGHT LED DISPLAY INDICATION RANGE -999 TO +9999 FITS TO DIN 43650 CONNECTOR PLUG-ON TO ANY TRANSMITTER WITH 4-20MA OUTPUT EASY TO SCALE ON SITE ROBUST DESIGN SET POINT OPTION
More informationUNIVERSAL TEMPERATURE TRANSMITTER
UNIVERSAL INPUT, DUAL CHANNEL ATEX & IEC Ex Version MATHS FUNCTIONS SENSOR CHARACTERISTICS DOWNLOAD VIA USB PORT ALLOWS FOR CUSTOM TYPES FLASH TESTED TO 4 KV DC INTRODUCTION The SEM210 is a universal transmitter
More informationAgilent 66000A 1200 W DC Modular Power System, GPIB
Agilent 66000A 1200 W DC Modular Power System, GPIB Data Sheet Speed and accuracy for test optimization 8-slot mainframe accepts up to 8 DC power modules 1200 W total DC power output, up to 150 W per module
More informationThe CAL range of temperature controllers
The CAL range of temperature controllers CAL Temperature Controllers Auto-tuning P.I.D. Controllers with RS232/485 Communication, Charting and Logging Software The CAL range of temperature controllers
More informationAMC 8 & IOC 8T. Analog Monitoring Card Type AMC 8 and Input / Output Card Type IOC 8T FEATURES
Analog Monitoring Card Type AMC 8 and Input / Output Card Type IOC 8T FEATURES Two cards providing 8 channels of temperature and process monitoring for VM 600 systems 8 channels of software selectable
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
More informationPriva Blue ID Network module SN1/SN2/SN3/SN3t
Priva Blue ID Network module SN/SN2/SN3/SN3t The system supports both bus and star topologies. Power over Ethernet An operating unit (TouchPoint) can be connected to the port for PoE, for instance. A major
More informationAutomation for a Changing World. Delta Multifunction Small Pressure Sensor DPA Series.
Automation for a Changing World Delta Multifunction Small Pressure Sensor DPA Series www.delta.com.tw/ia Features Energy-saving mode Various unit conversion functions function 0 sets of output response
More informationMPV1060RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1060RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 5W & 10W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse
More informationCOIL CHARACTERISTICS (Vdc) SERIES H,HD,HP,HT,HTD,HPT GENERAL CHARACTERISTICS. Date of issue: 06/ Page 2 of 5. B Vdc
ENGINEERING DATA SHEET CONTACTOR AMP BalancedForce Design Hermetically sealed Designed to the performance standards of MILPRF6 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 8 and 5 Vac, 400 Hz,
More informationController module. Brief description. Features. Block structure. Data Sheet Page 1/7
M. K. Juchheim GmbH & Co UK USA Jumo Instrument Co. Ltd. Jumo Process Control Inc. 36035 Fulda, Germany Temple Bank, Riverway 735 Fox Chase Phone (0661) 6003-0 Harlow, Essex CM20 2TT Coatesville, PA 19320
More informationOperating Instructions
Operating Instructions Sieger System 57 5701 CONTROL SYSTEM OPERATING INSTRUCTIONS Helping to make a safer world Ensure that you read and understand these instructions BEFORE operating the equipment. Please
More informationOperating Instructions. Power Supply & Latching Relay For Switches Model: RL manual_rl-6000_1016
Operating Instructions Power Supply & Latching Relay For Switches Model: RL-6000 manual_rl-6000_1016 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...3 5. Operating
More informationRТTH DUAL ROOM SWITCH
DUAL ROOM SWITCH FOR TEMPERATURE AND RELATIVE HUMIDITY Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS PRODUCT DESCRIPTION ARTICLE CODES INTENDED AREA OF USE TECHNICAL DATA
More informationOperating Instructions. Power Supply & Isolation Relay for Switches Model: RL manual_rl-5900_0215
Operating Instructions Power Supply & Isolation Relay for Switches Model: RL-5900 manual_rl-5900_0215 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...3 5. Operating
More informationBlue ID Communication module RS485 SC44
Blue ID Communication module RS485 Modular design An Blue ID Communication module RS485 provides the system with two RS485 ports for serial communication and is used to connect field bus devices. Characteristics
More informationINJ-24A Series Quick Installation Guide
INJ-24A Series Quick Installation Guide Moxa High-Power PoE+ Injector Edition 4.1, August 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationThe Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits.
Peripheral Relay The Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits. Up to 16 Cards can be connected to a multi-loop panel
More informationMIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationFP-PS-4. Features. Installation
OPERATING INSTRUCTIONS FP-PS-4 FieldPoint Power Supply These operating instructions describe the installation, features, and characteristics of the FP-PS-4. Features The FP-PS-4 is a FieldPoint power supply
More informationDPX15W Rated Input voltage range 24V nominal input VDC 48V nominal input 18-75VDC. Input Fuse 24V input, 6A Fuse 48V input, 4A fuse
Single and Dual Output 15W Din Rail Mount DC-DC Converters DPX15W Features and Benefits Features CE Approvals Wide Range Input Benefits Easier System Approvals Less Parts to Inventory Single and dual output
More informationHarrier. Controllers. Electronic Chemical Injection Rate Controllers
Harrier Controllers Electronic Chemical Injection Rate Controllers Harrier + Chemical Injection Controllers Electronic Chemical Injection Rate Controllers with Remote Monitoring The Harrier+ unlocks features
More informationPower supply. Interface technology in modular housing DIN rail devices, IM series. Features
Features 2,2 kò,5 W 5 V 5,1 V,3 W 24 VDC 2,5 A GN / L 85...264 VAC 9...375 VDC / N Safety extra-low voltage SELV IEC/ EN 695 Output voltage adjustable 24 28 VDC Nominal current 2.5 A Single/parallel operating
More informationOP7816 DATASHEET Optically Isolated 16 Digital Inputs Signal Conditioning Module
OP7816 DATASHEET Optically Isolated 16 Digital Inputs Signal Conditioning Module www.opal-rt.com Published by Opal-RT Technologies, Inc. 1751 Richardson, suite 2525 Montreal, Quebec Canada H3K 1G6 www.opal-rt.com
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
More informationMCX08M2 Programmable controller
Data sheet MCX08M2 Programmable controller MCX08M2 is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 8 DIN modules: programmability connection
More informationTechnical data. Housing Polyamide housing PA 66, self-extinguishing V0 acc. to UL 94. Supply Rated supply voltage (U n
Safety module CS AT 0 Module for emergency stops, end position monitoring for movable guards with delayed contacts at the opening of the input channels, semiconductor outputs (e.g. light barriers and magnetic
More informationData Sheet A200 Series Electric Actuators
Data Sheet Series Electric Actuators Series Electric Actuators Description Trend series actuators are used with Trend VB and SVG valves. Self stroking design minimises commissioning time and improves the
More informationBasler Accessories. Technical Specification POWER-I/O CABLE HRS 6P/OPEN. Order Numbers
Basler Accessories Technical Specification POWER-I/O CABLE HRS 6P/OPEN Order Numbers 2200000189 2000029411 Document Number: DG001383 Version: 09 Language: 000 (English) Release Date: 24 October 2017 Contacting
More informationEY-IO 534: I/O module, analogue inputs with galvanic isolation, modu534
Product data sheet 5.1 92.047 EY-IO 534: I/O module, analogue inputs with galvanic isolation, modu534 How energy efficiency is improved SAUTER EY-modulo 5 technology: modular, fast and universal Features
More informationLBVR1718. Description. Features channel paperless recorder
LBVR1718 18 - channel paperless recorder Description It is the world first paperless recorder of the same size in highest resolution 640x480 pixels VGA TFT display, infrared detector, maximum 18 channels,
More informationCompact Coded Magnetic Safety Interlock Switch and Control Units
C Conforms to EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 UL and C-UL listed, TUV certified Description R US Compact Coded Magnetic Safety Interlock Switch
More informationMultifunction Transducer MT440
Multifunction Transducer MT440 Voltage and current auto range measurements up to 600V, 12.5A Universal wide auxiliary power supply range 24 300 Vdc, 40 276 Vac Power accuracy class 0.5 (EN 60 688), Up
More informationMPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
More informationMINI MCR-SL-UI-2I. Configurable signal duplicator. Data sheet. 1 Description
Configurable signal duplicator Data sheet 102382_en_03 PHOENIX CONTACT 2012-05-02 1 Description The MINI MCR-SL-UI-2I(-SP)(-NC) configurable signal duplicator is used to electrically isolate, condition,
More informationUser Manual Digital Input Module
EH-RIO2 Series RIO2-XDP4, -XDP8, -XDP16, -XAH4 Version 1.04 Copyright Hitachi Europe GmbH 2015. All rights reserved. DOCUMENT CHANGE SUMMARY REV PAGE REMARKS DATE EDITOR 1.4 All Created 18.06.2015 Winter
More informationIO-PT4. Component identification. User safety and equipment protection guidelines. Unitronics Industrial Automation Systems 1
IO-PT4 I/O Expansion Module 4 PT100 Inputs (-50 to 460 C) The IO-PT4 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 4 PT100 inputs
More informationBlue ID Power injection module PI60
Blue ID Power injection module Legend A B LED for status of module LED for system power LED for status of module The LED shows the status of the module. The LED is on continuously when the module is working
More informationC7110C1001A / C7110D1009A WALL MODULES
HONEYWELL EXCEL 5000 OPEN SYSTEM GENERAL The C7110C1001A and C7110D1009A are combined CO2 / temperature wall modules designed for applications in indoor ventilation and air conditioning systems. In conjunction
More informationLOGIC CONTROLLER INSTALLATION MANUAL NTR 756 B /E
LOGIC CONTROLLER INSTALLATION MANUAL NTR 756 B /E Table of contents 1. INTRODUCTION...1 2. HARDWARE DESCRIPTION...2 3. INSTALLATION...6 4. CONNECTION...8 5. USER SAFETY AND PROTECTION OF THE EQUIPMENT...11
More informationM-series Intrinsically Safe I/O
DeltaV Distributed Control System Product Data Sheet M-series Intrinsically Safe I/O Features full system modularity Reduces system footprint Decreases installation time and expense Plug-and-play installation
More informationController module. Brief description. Features. Block structure. Page 1/7. Data Sheet
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More information9000C INDEX APPLICATION EXAMPLE 1 SPECIFICATION 2 SAFETY AND WARNING... 3 CONNECTION 3 INSTALLATION.. 4 ORDERING CODE 4 TROUBLE SHOOTING 4
Doc.Ref.No.:m92E/om/101 INDEX APPLICATION EXAMPLE 1 SPECIFICATION 2 SAFETY AND WARNING... 3 CONNECTION 3 INSTALLATION.. 4 ORDERING CODE 4 TROUBLE SHOOTING 4 ISOLATED CONVERTER 9000C SERIES 9000C Series
More informationData Sheet IQ21x Series Controllers
Series Controllers Series Controllers Description The series of intelligent controllers are designed for use as unitary controllers in building control systems. Full compatibility with other Trend IQ controllers
More informationE-STOP relays, safety gate monitors
E-STOP relays, safety gate monitors Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button
More informationNI 6521 Specifications
NI 6521 Specifications This document lists specifications for the NI 6521 device. All specifications are subject to change without notice. These specifications are typical at 25 C unless otherwise noted.
More informationMPV1560RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1560RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 15W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse Input
More informationABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Phaseo Battery
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More information20 General technical data XI/ON
20 General technical data XI/ON General technical information General technical data XI/ON Potential isolation Ambient temperature Operating temperature Storage temperature Relative humidity Noxious gas
More informationMHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
More informationBasler Accessories. Technical Specification POWER-I/O-PLC+ CABLE, HRS 12P/OPEN, 10M. Order Numbers
DRAFT Basler Accessories Technical Specification POWER-I/O-PLC+ CABLE, HRS 12P/OPEN, 10M Order Numbers 2000034085 Document Number: DG001399 Version: 01 Language: 000 (English) Release Date: 22 September
More informationTN-5308 Quick Installation Guide
TN-5308 Quick Installation Guide Moxa ToughNet Switch Edition 6.0, February 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More information