M390 V1.6. Embedded Router Module. Shenzhen Libtor Technology Co.,Ltd Page 1 of 12

Transcription

1 Embedded Router Module M390 Specification V1.6 Shenzhen Libtor Technology Co.,Ltd Page 1 of 12

2 Copyright owned and kept by Shenzhen LibtorTechnology Co,Ltd ( ). Any Company and Individual mustn t use and copy the part and complete content and broadcast in any form without permission from company. Trade mark declaration LBITOR and Other LBITOR trademarks are owned and controlled by Shenzhen LBITOR Technology Co.ltd The Trademark and Registered trademark mentioned above are owned by related person. Notice Regarding to product version updating and the other reasons, this file s content will be updating based on research and development results.it is only used for instruction unless otherwise stipulated.all declarations, information and suggestions included in this files can t make up with any forms of guarantee. File The record for version and modication Version Specification Date Editor V1.0 Offical launch 02/09/2014 V1.1 Added pin foot definition 12/10/2014 pay special attention V1.2 Added GPIO definition 11/11/2014 V1.5 Added GPIO definition 15/07/2015 V1.6 Added Ads Pushing function 08/01/2016 Shenzhen Libtor Technology Co.,Ltd Page 2 of 12

3 Embedded Router Module M390 1 Module introduction 一. M3 M Poduct Outer Shape M390 is based on the market requirments and developped embeded router module by Shenzhen Libtor Technnology co.,ltd. Supply many connector, USB 2.0 connector and insert 3G/4G communication module, storage, Vedio and son. Offer 2 pcs LAN ports (one can be used as WAN port), 1 pcs UART connector, 300Mbps s Wifi network and many GPIO connectors, User can be convenient for the second application development. 1 Router Function description Shenzhen Libtor Technology Co.,Ltd Page 3 of 12

4 1 Software connection way D User quantities Operation system S Browser Security Management Server Equipment management WLAN security mode 3G/4g connection, DHCP/Static IP/PPPoE Wire:253(in theroy),wirless:29 Windows XP/VISTA Linux 2.6 Windows 7 MAC OS : and above IE:6.0 and above Safari:1.2.4 and above Firefox: and above Fiewall setting:protect the computer in the local area network purposed attacking from Internet Site port:prohibition access to some web. MAC filtraction:prohibition MAC address already added Access control:control the right of access to computer in LAN. Port restriction:stop some virtus according to some port from connection at one time. Stop DOS attack. Virtual server:set inner service server and provide user to access DMZ :when you need set the opening port of virtual server is not sure, you can set it into DMZ host. Port trigger: it can realize WIFI router open to the inner service port automatically by accessing to the port of Internet Serial port service:realize the serial port transit transparently,at order control and so on. Message service: it can control connection, hanging off and restartting by message Area setting NTP Server setting Copy and storage system setting Recovering the setting information from files Recovery to default setting Software updating Remoting management Restart Reset password Open System WPA-PSK WPA2-PSK WPAPSK WPA2PSK(combine WPA-PS with WPA2-PSK mode) WPA1WPA2(combine WPA with WPA2 mode ) Shenzhen Libtor Technology Co.,Ltd Page 4 of 12

5 2.Hardware function Hard ware connector Operation frequency: Antenna WIFI transmission speed Outer connector Data speed Send power Receive sensitivity Demension Power Comsumption (current) Work environment IEEE802.11b/g/n, M IEEE T2R,Double Antenna connector 300Mbps Ethernet Port:2 pcs USB(Host):1 pcs UART :1pcs FULL UART: 1 pcs GPIO:16 PCS I2C:1 Pcs I2S: 1 pcs SD card: 1 pcs n: up to 300Mbps b: 1, 2, 5,5, 11Mbps g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 11n HT40_HT20 MCS7 : +14Bm 11b CCK: +18 dbm 11g OFDM: +14dBm -66dBm at 150Mpbs -73dBm at 54Mpbs -86dBm at 11Mpbs Long*width*Height:30*51*5.6mm DC supply power:3.3v smaller than 300mA Work temperature:-10 C ~ +60 C Storage temperature:-20 C ~ +70 C humidity: 5%~95%,No condensation 二 :Appication illustration Shenzhen Libtor Technology Co.,Ltd Page 5 of 12

6 一. 2Connector Specification General Mini PCI Express Connector The morphology of connector is general Mini PCI Express connector, PICE connector use 5mm height,the definition of 52 pin connector for module is listed as below: 1, definition as below : Shenzhen Libtor Technology Co.,Ltd Page 6 of 12

7 Shenzhen Libtor Technology Co.,Ltd Page 7 of 12 Pin Number Singal Name Description 1 WLAN WIFI_LED 2 VCC33 3.3V power supply 3 NC NC 4 GND GND 5 NC NC 6 LINK4 LAN4 Ethernet LED 7 SD_WP SD_WP 8 EPHY_RXN_P0 LAN0EthernetRXN 9 GND Digital 10 EPHY_RXP_P0 LAN0EthernetRXP 11 RXD UART1_RXorGPIO10 12 EPHY_TXN_P0 LAN0EthernetTXN 13 TXD UART1_TXorGPIO8 14 EPHY_TXP_P0 LAN0EthernetTXP 15 GND Digital 16 EPHY_LED0 LAN0_LED 17 RIN UART1_RIorGPIO14 18 GND Digital 19 DSR UART1_DSRorGPIO13 20 EPHY_TXOP_P4 LAN1EthernetTXP 21 GND Digital 22 EPHY_TXON_P4 LAN1EthernetTXN 23 CTS_N UART1_CTSorGPIO9 24 EPHY_RXIP_P4 LAN1EthernetRXP 25 RTS_N UART1_RTSorGPIO7 26 GND Digital 27 GND Digital

8 28 EPHY_RXIN_P4 LAN1EthernetRXN 29 GND Digital 30 I2C_SD I2C_SDorGPIO1 31 DTR_N UART1_DTRorGPIO11 32 I2C_SCLK I2C_CLKorGPIO2 33 DCD UART1_DCDorGPIO12 34 GND Digital 35 GND Digital 36 USB_D- USB_D- 37 SD_CLK SD_CLK 38 USB_D+ USB_D VD 3.3VD 40 GND Digital VD 3.3vd 42 GPIO0 GPIO0 43 SD_CD SD_D1 44 RXD2 UART2_RXorGPIO16 45 SD_CMD SD_CMD 46 TXD2 UART2_TXorGPIO15 47 SD_D1 SD_D1 48 SD_D0 SD_D0 49 SD_D2 SD_D2 50 GND Digital 51 SD_D3 SD_D3 52 3V3 3.3VPower supply The main distinction bettween M390 and M350 in red letter. Pay a special attention : 1: The light of LAN0 port anf LED indicate postive pole for diode, The negative pole connect with chip. This ligh is opposite with M350 light.m350 indicator is positive pole connect with chip for diode,negative pole connect with ground. 2:GPIO8TXD,GPIO10RXD data and GPI07,GPI09 need to be hanged on when connecting serial port1 to communicate.they can t be used as other purpose. 3: The power of TF card need to connect 3.3V and 4.7 UF capacity that should be connected ground from inside when connect TF card. 4:Pay attention to the singnal control of SD_CD,SD_WP if use TF card, Pls make these two singals keep in a low levels if don t contorl. 5: This module for WAN/LAN port only use LAN0 port can t be used repeatly. 6: GPI011 is used for SYS M350 indicator, GPIO13 is used for SYS M390 indicator. 7: It need to make the high levels efficient if you wanr to use GPI00 s hardware reset. Shenzhen Libtor Technology Co.,Ltd Page 8 of 12

9 二.Antenna connector Module have 2 WIFI antenna connector. Antenna impedance must choose 50ohm charactersitics cable and antenna, Antenna connector on module Which we use H from Astron company connector or U.FL-R-SMT-1(10)RF from HRS company connector (these two connectors are common use ).The demision for RF connector listed as below : 3 connector s application Shenzhen Libtor Technology Co.,Ltd Page 9 of 12

10 一 UART connector Module support 2 pcs UART connector, it can be used to connect User host s UART,or connect serial equipment. 二 Power connector Supply specified voltage typical value from outer is 3.3V( V) power to module,the high value current is 1A. 三 USB bus Module provide a high speed USB connector. It can be applied for HOST or DEVICE module, connect 3G module from outside,usb camera,storage equipment and so on. 四 LED indicator Module provide 4 state indicator pin feet, SYS.3G dailing,lan0,lan1. 1.Power indicator: It will be bright when power supplied. 2.SYS indicator (SYS): It will be flashing when the system operated normally 3. 3G state indicator( connect Internet state indicator) 3G dailing successfully or It will be bright when connect successfullhy. 4. LAN light: It will be bright when successfully connected, It will be flashing when data pass through. 五 RESET connector Module offer a reset pin feet, Reset circuit by connectingoutside. It can make module hard reset. 六 GIPO connector 1 GIPO0:reset reback,high levels more efficient. 2 GPIO1:USB connector indicator. 3 GPIO2:USB HUB reset 4 GPIO11:3G/4G module reset,low levels more efficient( newly added 15/07/2015) 5 GPIO12:3G indicator. 6 GPIO13:SYSindicator. 7 GPIO14:Watch dog s signal,it will send 100ms high levels per 30 seconds 4Development board for external use We can provide the full function connector development board of module for customers,development board for outer shape is illustrated as below : Shenzhen Libtor Technology Co.,Ltd Page 10 of 12

11 Embedded Router Module M390 Development board s Connector and parameter : 1 the core module for router is M G/4G module, can match with tens of communication modules. 3 SIM/UIM card slot. 4 TF card slot, can support 64G capacity TF card. 5 USB connector, it canconnect U disk,mobile hard disk, Interent card from outside and so on. 6 8 B indicator (power,system,wifi,link,lan1,lan2,ssd,gps) 7 Double power connector, Interface 1:2.1 mm round-headed input points interface 2: 5.08 selflocked input points;support 6-35 V wide voltage input. 8 Double B with RJ45 connectors. 9 URAT connector(rs232/rs485 repeat use ) 10.USB connector inside, It can be used as mobile hard dise inside Shenzhen Libtor Technology Co.,Ltd Page 11 of 12

12 11 GPS+ North pole module installaion ( this function need to be customized ) 12 Serial port inside : it can expand many kinds of serial port outside. 13 RS485 core chip B: this function need to be customized 14 RS232 Core chip V power supply inside. 16 5v power supply inside. 17 UART2: adjusting serial port inside. Customer can access to our Taobao platform to place order if want to buy M390 and development board for full function.pls see below web address: Shenzhen Libtor Technology Co.,Ltd Page 12 of 12