Unipark. Automatic parking space bar guard. Today reserving your parking space is possible.

Transcription

1 Automatic parking space bar guard Unipark Today reserving your parking space is possible. The Unipark automatic bar is an innovative idea that can be applied in residential and industrial settings. It is easy-to-use and practical, and ensures that your parking space is always free.

2 Unipark Unipark allows you to always park without wasting time It is ideal for all those situations that require private or staff parking spaces to be safeguarded. Unipark also makes it possible to raise and lower the bar by simply using the transmitter. Aesthetics and efficiency. For improved management of the reserved parking space, Unipark is also available with an extra-length bar. The electronics > Automatic pairing of radio code from transmitter to receiver. > Amperometric device detects obstacles and manages the end points. > Input connector for system extension cards. Up to 4 Uniparks can be connected to the same control panel. The range Came - KDEP#CEN27A4S / The data and information shown in this catalogue are subject to change without the obligation to give prior notice by CAME cancelli automatici S.p.A. Dimensions 800 Limits to use 552 Technical features 920 ARK1-990 ARK2 490 Type UNIP + ARK1 UNIP + ARK2 Max space width (m/ft) 2/ 6,56 2,2/ 7,2 24 V DC Type UNIPARK Protection rating IP54 Power supply (V) (50/60 Hz) 230 AC Motor power supply (V) 24 DC Current draw (A) 1,7 max Power (W) 20 Manoeuvre time (s) 10 Duty cycle (%) INTENSIVE USE Resistance to crushing (Kg/cm² - lb/in²) 2,5-0,85 Colour RAL 1028 Operating temperature ( C - F) V DC Control panel Radio receiver Total safety. Movement stop in case of obstacle detection provides maximum safety while in use. Unipark features a base to affix the operator to the ground in any applicative condition. Standard installation Radio transmiter Reception antenna 001UNIP 002ZL22 002LM22 002LB22 001ARK1 001ARK2 Unipark small Self-locking operator complete with fixing plate. Control panel for one barrier with built-in radio decoder. Possibility of controlling up to 4 barriers with n. 3 additional LM22 cards. Motor-management extension card. Card for connecting n. 2 12V-1.2Ah emergency batteries with rack. Small barrier. Large barrier. Unipark large Made in Italy Came cancelli automatici S.p.A. via Martiri della Libertà, Dosson di Casier - Treviso - Italy - info@came.it

3 COMPLETE PAY-TO-PARK SYSTEM

4 The state-of-the-art; the now future of Came parking systems presents PS ONE, the ultimate web-based solution for pay-parking systems; even with multilevel and reserved parking facilities. Modular, versatile, simple and intuitive, its made for maximum connectivity and system integration. Easy, simple and safe parking management.

5 MODULARITY AND INTEGRATION, INFINITE DEVELOPMENT POTENTIAL. Entry/Exit unit Manual cash register The fruit of Came s R&D, PS ONE exploits technology by making native ETHERNET interface devices. This advanced management system lets you configure unlimited peripherals, such as automatic cash registers, entry and exit units, pedestrian monitors, and staffed pay stations. All of these devices, connected to the Ethernet network running the TCP/IP universal protocol, are managed through a central server, to which can be connected countless devices. A modular solution especially engineered to meet the typical needs of small, medium and large parking facilities. Not only: connecting to the Ethernet network is extremely versatile as it can be done via optic fibres, WiFi connections or even mixed solutions. PS ONE automatic cash register Central server Compared to traditional parking management systems on the market, the PS ONE system features a native Ethernet network. Meaning that each device is Ethernetnetwork worthy so there s no need for any additional modules. This lets you connect an unlimited number of devices to meet any needs, from small temporary parking zones to large parking lots.

6 ALL AROUND EFFICIENCY AND CONTROL ALWAYS, ANYWHERE. The SNMP protocol if for remotely reaching the system and receiving and sending information or system-status notifications. So you can remotely manage the parking system or simply monitor the situation or quickly respond to an emergency call. So each event is monitored in real time, enhancing the service efficiency, while also controlling operating costs and transit safety. BENEFITS FOR THOSE MANAGING, SOLUTIONS FOR USERS. PS ONE features a PLATE READER, an OCR module for reading and recognizing license plates. It digitalises any license plate in the world, including ones in Arabic. The EYE SYSTEM module, moreover, can associate, at each vehicle s entry and exit, the high definition images of all four sides of the car. If needed, with a simple license plate or ticket search, the supervisor on duty can view previously recorded HD images, to check any vehicle damage claims, for example. SNMP protocol REMOTE CONTROL All of the PS ONE peripherals, like the cash registers and the entry/exit units, are based on ARM hardware architecture and engineered to ensure low energy consumption.

7 MULTIPLE PAYMENT SYSTEMS. The automatic with PS ONE cash register can manage all main modes of payment. Fitted with the latest generation displays, which are ultra simple and quick to use, they manage payments in the local currency with either coins or bank notes. To cut down on system supervisor intervention, the automatic cash register can be fitted with a change returning device for coins or bank notes, both of which are self-loading. They can also take all major credit cards and debit cards in the various international circuits. Customers can also pay with the more recent, innovative payment system, such as: NFC - Near Field Communication so one can pay via cell phone or proximity card. SPECIAL BUSINESS PARK AGREEMENTS. The advanced PS ONE system lets those managing it boost productivity in their facility with specific actions and agreements, discount packages with simple complimentary Vouchers or with mobile devices: tablet PCs, smart-phones, etc. To this end, all PS ONE units can be fitted a 2D barcode reader. With rechargeable pre-paid cards, you can also custom-manage registered parkers. NFC PAYMENT SMARTPHONE SMARTPHONE PAYMENT PAYMENT INTERNET PAYMENT NFC PAYMENT TYPE OF PAYMENT One can pay via web, even with prepaid or postpaid packages. Not only, debit cards are also possible. IT CARD YMENT CREDIT COIN CARD PAYMENT COIN BANK NOTE PAYMENT PAYMENT BANK NOTE COIN PAYMENT PAYMENT

8 ELECTRONICS AND TECHNOLOGY mm ENTRY UNIT The fundamental elements are: Fan fold ticket printer Proximity reader for registered parkers TFT 5.7 display Ticket request button Coil control detector Barrier management Built-in video-intercom with voip technology Fans and heaters to conditions air indoors Collector for 5,000 fan fold tickets The optional elements are: IMAGER reader for 1D and 2D barcodes and even on mobile devices Recording videocams to memorise vehicle entry images Videocam and OCR module for license plate reading Built-in barcode reader, printer device, ISO format plastic card writer with proximity and microchip mode EXIT UNIT The fundamental elements are: Motorised ticket reader Proximity reader for registered parkers TFT 5.7 display Coil control detector Barrier management Built-in video-intercom with voip technology Fans and heaters to conditions air indoors The optional elements are: IMAGER reader for 1D and 2D barcodes and even on mobile devices Recording videocams to memorise vehicle entry images Videocam and OCR module for license plate reading Built-in barcode reader, printer device, ISO format plastic card writer with proximity and microchip mode AUTOMATIC CASH REGISTER The fundamental elements are: Wide vertical TFT graphic display Coin Reader Banknote Reader Self-loading change-giving hopper Ticket-issuer printer Video-intercom with voip technology Built-in barcode reader, printer device (to reprint lost tickets) and ISO format plastic card writer and reader with both proximity and microchip modes Coin and banknote collected in separate, sturdy boxes under lock and key The optional elements are: Self banknote loading change giver Credit Card / cash card and microchip payment management Single die hopper (max 2) 2D IMAGER reader Touch Screen monitor Banknote change giver compartment (1 denomination ) Proximity badge reader/writer for registered user recharging 1720 mm 320 mm 750 mm ENTRY/EXIT UNIT The entry unit is based on an ARM architecture microprocessor that controls any and all peripherals fitted to the device. Communications to the central server passes through an ETHERNET network with the TCP/IP communications protocol. So each event is monitored in real time and sent to the management server. The mechanical structure is made of rust-proofed varnished steel. PS ONE AUTOMATIC CASH REGISTER Modular automatic register made of varnished steel with highly resistant features. The management software allows high levels of system customisation: from viewing information on the monitor to managing custom rates for special events or periods.

9 470 mm STAFFED MANUAL REGISTER The optional elements are: Manual barcode ticket reader Built-in barcode reader printer, and ISO format plastic card writers reader in both proximity card and microchip modes Receipt printer Additional user-side display Rfid card reader/writer Built-in cash drawer CENTRAL SERVER AND MANAGEMENT SOFTWARE The management software is located in a central server that manages all entry and exit devices through an integrated web server and memorises all the events on a relational data base. With a standard browser and Internet connection you can access all of the query and statistical features needed. The client number is free; all users have their own profile through which they can access any associated features. The server can also monitor and handle (even remotely) the entry and exit passages. 267 mm 410 mm 210 mm INTERCOMS IP operator station voice only IP operator station voice + video GSM telephone call Router STAFFED MANUAL REGISTER The staffed manual register is composed of an industrial PC with a 15 touch screen. CENTRAL SERVER The server provides all of the features found on voip control unit required to manage an integrated intercom system.

10 SYSTEM COMPLEMENTARY PRODUCTS: Registered parkers Entry point Ticket Reader LCD 20x2 Display Proximity Reader IP Intercoms Pedestrian barcode and proximity reader LCD 20x2 Display Proximity Reader Barcode ticket reader IP Intercoms Entry unit double height Base unit with doubled user interfaces. Exit unit double height Base unit with doubled user interfaces. Vehicle classification The system lets you define, depending on the entry points, differentiated rates, such as for cars, motorcycles, campers, buses, and so on, thanks to its careful classification based on vehicle heights, axles. Tag long range Long range vehicle identification system with RFID technology to automate vehicle access making it user-friendly, quick and inexpensive. Available spaces display Made up of a customisable screen-printed panel and a high-luminosity 4 alphanumeric display to show available spaces.

11 PS PLAZA Intelligent parking solution AUTOMATED PAY & DISPLAY CAR PARKING SYSTEM

12 THE CAME PS PLAZA Intelligent parking solution CAME proudly presents the PS PLAZA Parking Management System. Made up of two complementary components, the PS PLAZA Terminal and the PS PLAZA Software. PS PLAZA offers a fully modular solution for all your parking management requirements. PS PLAZA is not just a simple parking area with a Pay & Display machine. It is a robust and elegant combination of technology and design that effectively manages the resources of your parking area landscape. Often, many municipalities have complex parking environments covering a disperse geographic area divided in to sub-sections. These sub-sections then have their own individual considerations including pricing, fee collection, curbside parking, lot parking, times in effect, maintenance, legacy Pay & Display deployments, and enforcement. CAME has developed PS PLAZA to address these considerations and to provide a centralized solution to manage your parking topography. PS PLAZA MACHINE Functionality and sophisticated design The CAME PS PLAZA Machine is conceived to provide an efficient and intelligent solution to the increasing traffic problems present constantly in our cities. This product combines the optimal mix of all the modern payment sys tems applied to car parking with an excellent industrial design. The payment system is designed to accept payment in the form of coins, credit and debit cards, smart prepaid cards. The parking devices commu nicated by means of a wireless comu nication network using either GSM or GPRS technology. The network allows online configu ration and monitoring of device sta tus, money collection and statistical user data collection. The PS PLAZA Management Software application soft ware allows to control both the con figuration features and the complete usage data collected by the device by means of a friendly browser based interface. Key benefits include: easily integrated with CAME PS PLAZA units environmently and economically conscious solar power support for wireless or hardwired Data Transmission Networks remote managment and diagnostics for PS PLAZA Units Data Collection for reporting and trend analysis advanced fee collection options PS PLAZA is the result of the need to find an effective, intelligent solution to the traffic and parking problems that have an ever-increasing impact our daily city lives. CAME wanted to combine the functionality of the new par king meter with a sought-after design that fits perfectly into the environmental and urban context in which the parking meter is installed. Users will be able to pay in two different ways: coins or cards. By means of a GPRS modem, the operator can monitor the network of parking meters as regards both their operation and the collection of statistical data regarding the use of the parking meters themselves.

13 PS PLAZA MACHINE Characteristics of excellence Structure: AISI-304 stainless steel Modular architecture: basic configuration, expandable with additional technological elements (card readers, modems, GPRS...) Construction: in three compartments that can be accessed separately technical compartment cash compartment electrical connection and battery compartment. Cash box: capacity of 5 dm 3 Power supply: Solar panel 12 V - 55 Ah rechargeable battery Option power at 230V - 50Hz by using an external control panel (to be required optionally) > Mains or public lighting Ergonomic panel: with serigraphed directions for use Display: backlit LCD 4 lines of 20 alphanumeric characters to display the date, time, operating status, instructions Optional 240x64 graphic display Five anti-vandalism tactile buttons: Green for requesting a printed receipt Red for cancelling the current operation Silver push button (1) for selecting the language Silver push button (2) for selecting the tariff Silver push button (3) for selecting the amount to be debited from the card COIN SELECTOR A perfect payment management Card reader: supports chip card technology prepaid/pay-as-you-go cards bank cards Thermal printer: with self-sharpening cutter Visible compartment for removing the receipt with transparent anti-weathering protection Management methods: as a stand-alone version with connection to a control unit via GPRS modem or Ethernet network Programming: via resident web application or remotely via the central management server. Protection rating: IP54 Dimensions: H = 1830 mm L = 470 mm D = 270 mm Conformity: European Standards EN Vehicle parking control equipment Pay and display ticket machine Base plate Foundation clamp PS PLAZA has been designed to be safely packaged, transported and stored. The PS PLAZA machine s clamp must be cemented so that its four coach screws are completely submerged into the cement casting.

14 SMART MODULAR ARCHITECTURE Simple interventions COMPLETE MANAGEMENT & SIMPLE PROGRAMMING 3 compartments that can be accessed separately: technical compartment cash compartment electrical connection and battery department (coin insertion slot) 1484 (display) 1589 (user interface / information area maximum height) The PS PLAZA software application, installed on the parking meter, enables complete management and programming of the device via its web interface. CAME PS PLAZA Server is a powerful tool for managing your parking area resources. PS PLAZA Server can be used as part of the CAME PS PLAZA parking management system deployment. When used in a full CAME PS PLAZA parking management system deployment, PS PLAZA Server allows you to connect to each individual PS PLAZA terminal for historical reports, real-time usage, terminal diagnostics, and configuring the terminal. All information generated from the individual terminals is captured by the PS PLAZA Server database which allows for system wide monitoring, reporting, and trend analysis. Standard multi-user support allows for granular management of user permissions for not only configuring and maintenance, but also for reporting and diagnostic functions. PS PLAZA Server includes all the tools and functionality you need without any hidden modules or pricing. CAME PS PLAZA Server includes: Web Portal System Interface Standard Multi-user support Remote Reporting and Diagnostics Support for Variable Fee Schedules Real-Time PS PLAZA Terminal Monitoring and Alerting Robust, Fully Featured Parking Management Software Integrated Remote Management for CAME PS PLAZA Terminals PS PLAZA SERVER SYSTEM REQUIREMENTS : Operating System: Windows XP or Windows Server 2003; Web Server: IIS 4.0 or higher

15 COIN COIN The advantages The Came automatic parking management system is the ideal solution to exploit the efficiency of the system to the maximum level, while simultaneously checking operating costs and transit safety. Each component part, has in fact been conceived to meet all of the typical needs of modern parking areas, while still maintaining maximum integrative modularity standards with all of the other Came products, according to a precise policy that frees the system of any limits in terms of further development. Choosing Came therefore means exploiting to the fullest the potential of a product that has been designed with your needs in mind. Made in Italy The range 230V A.C. automatic pay to park system PSE4000 Steel entrance unit with rust-proof coating and RAL1028 varnishing, with sensor for transponder cards and keychains and token dispenser PSU4000 Steel entrance unit with rust-proof coating and RAL1028 varnishing, with sensor for transponder cards and keychains and token dispenser PSC4000 Automatic steel cashier with rust-proof coating and RAL1028 varnishing, with sensor for transponder cards and key-chains, coin payment system, token collector and display PSM4000 Attended cashier station complete with control unit, software, display and PC30 interface to connect to the PC. PSI01 Control unit for auxiliary devices such as traffic lights, signs, metal-mass detection sensors (8 outputs). PSI16 Control unit for auxiliary cashiers, enables up to 16 PSC1-type payment stations to be set up. PSC1 Auxiliary cashier enables payment even without PC connection. Automatic pay to park system for up to 10,000 parking spaces Command accessories GET Proximity token The automatic cashier Illuminated display shows amount due for parking. For its quality processes management Came Cancelli Automatici is ISO 9001:2000 certified, and for its environmental management it is ISO certified. Came designs and manufactures entirely in Italy. Warning accessories PSSRV Red-Green Traffic light Ø 210 mm PSINS Two-sides luminous sign showing FREE-FULL, supplied with mounting brackets 230V A.C. simplified automatic pay to park system PS5000 Simplified automatic cashier in galvanized and painted steel - RAL , with display and coin-payment (fixed sum and no back change). Additional accessories SMA Single channel metal-mass detection sensor SMA2 Two channel metal-mass detection sensor TST01 Transponder card ISO format TST04 Reprogrammable transponder card ISO format PCT Transponder key-chain TAG Transponder bulb that can be housed in Came, Atomo, TOP-432NA and TOP-434NA series transmitters Intercom to guard house (optional). Technical features Type PSE4000 PSU4000 PSC4000 Protection rating IP54 IP54 IP54 Power supply (V) 230 A.C. 50/60 Hz 230 A.C. 50/60 Hz 230 A.C. 50/60 Hz Operating temperature ( C) Dimensions (mm) 1500 x 445 x x 295 x x 335 x 453 Colour RAL1028 RAL1028 RAL1028 Ample change retrieval tray. Limits to use Maximum parking spaces Dedicated software Use w/out PC Type of PC connection Maximum distance between PSC4000 and PC Maximum number of manual cashier stations Maximum number of levels or floors YES YES (partial) RS232 - RS485 5 m without PC40 (RS232) m with PC40 (RS485) 16 4 Dimensions Sturdy, tamper-proof cabinets finished with rust-proof coating PS4000 Pay to park systems PS5000 Simplified Parking The PS5000 unit is the ideal solution when pay-to-park facilities require a fixed sum toll which can be paid with coins of different denominations and which does not give back change. It is easy-to-install and, at a later date, can be integrated with an RBM84 access control system to handle any membership parking. This unit cannot be connected to the other PS4000 system units. PSC4000 Automatic cashier This model is equipped with a token slot-unit for coins of various denominations and a sensor for transponder cards and key-chains for subscribers to the parking area. It does not provide any change but can be integrated by manual pay-stations, linked to a PC to manage parkers and parking subscriptions, or with other auxiliary manual cashierstations that do not need to be connected to a PC. - info@came.it PSE4000 PSU4000 PSC4000 PS Came DEP /2007 The solution for all types of parking, even on several levels. PS4000 is a complete system for managing pay-to-park systems, both for occasional as well as subscribed parkers. The system can be set up with one or more cashiers, on several levels, with outdoor signs displaying the number of available spaces. The data and information appearing on this catalogue are subject to change at any time without warning from Came cancelli automatici s.p.a.

16 Automatic pay to park parking lots for up to parking spaces PS4000 Pay to park PS4000 is a complete system for managing parking areas in small, medium and large commercial facilities. The entrance and exit units, together with the cashiers, are in fact specifically designed to manage the traffic of both occasional as well as subscribed parkers. The system enables integration with tokens and transponder cards and key-chains, besides coin-payment for occasional parkers. The system can also take several entrances and exits, even over numerous levels. Standard installation The system configuration is at the basic condition for an efficient parking management system. There are, in fact, numerous applications depending on the type of parking lot that needs to be managed, the number of entrances and exits and cashier stations, and whether these are manual or automatic. The top-level configuration for the PS4000 can operate 16 entrance and 16 exit units, 8 automatic cashier stations, 1 manual cashier station and 16 auxiliary cashiers. This system can be set up over 16 different parking levels. The minimal configuration, however, can operate with only two units, at the entrance and exit, and with only one attended cashier station for manual payment of parking. The software The management software, which runs with Windows, features a clear and intuitive graphic interface and does not require any specific hardware to run. Use is extremely simple an even without training, the staff will be able to manage the system promptly. A permanent connection to the PC is not indispensable, other than for the initial configuration operations and the input of new subscribers. The software can manage subscribed parkers and occasional parkers, for a total parkers. The GET transponder token is the ideal tool for managing occasional parkers. Besides its exceptional sturdiness, the token is not susceptible to magnetic fields and sun rays, it is small and may be easily stored in a wallet. Entrance and exit units Button for dispensing the transponder token at two different heights. Built-in intercom connection for contacting the central guardhouse in emergencies. Transponder sensor reads proximity cards and key-chains, used by subscribers. The basic configuration Small parking facilities can operate with the minimal configuration, that is, the entrance unit, the exit unit and the manual cashier. A typical application would be the parking lot of a shopping mall where customers use the parking spaces and pay directly at the attended, outdoor cashier or directly indoors at the retail outlets. This application ensures simple, efficient use, while being perfectly expandable if the traffic volume needs were to increase. Auxiliary cashier station The functions The PSS4000 software enables full control of subscribed parkers. Simple to use it enables easy readout and configuration of all parameters. Once configured, the system works even when not linked to a PC. For managing the system at a distance, the software may be used through a modem. The automatic parking lot Pay to park areas are becoming more and more popular as solutions to traffic issues within large and small urban centres alike. The Came solution includes all of the management, control and command devices, which are specifically designed for parking lots, along with all the automated devices needed to control access, such as automatic barriers and safety devices. Ample token retrieval tray. Large multi-level parking system The TST01 and TST04 cards are specifically designed to manage parking areas where clients have weekly, monthly or other passes. Inside electronics dedicated to managing the unit, protected by door under lock and key. Large parking lots may require multiple entrance and exit units, but above all, they require automatic payment stations. The system can always be integrated with a manual payment stations or auxiliary payment stations located in remote points of the parking lot. This configuration enables subscribers using transponder cards and key-chains to be managed. Manual cashier Parking subscriptions Sturdy, tamper-proof steel cabinets, with rust-proof coating and varnished with epoxy powders. For customers who choose to subscribe there are several configurable management options, with scalable entrances broken down into time or calendar terms. These can be limited to which entrances are in fact assigned. Transit control in this case is done through transponder cards and key-chains, which are coded and inputed into the system. For system equipped with automatic cashier stations subscription recharges can also be activated directly at the cashier station, even when the parking area or payment stations are unattended. Subscriptions may also be directly managed through the software, when certain functions need to be activated or deleted from cards already in the system. PSE4000 Entrance unit PSU4000 Exit unit The comfortable transponder key-chain, is always handy for subscriber. Located parking lot entrances, can be made up of a maximum of 16 units. Enables occasional parkers to be dispensed with a transponder token to access the parking lot. Subscribers may use the transponder card or key-chain to access the parking lot by simply placing them in proximity of the sensor. The entrance unit is usually set up with a Gard series Came automatic barrier along with command and safety accessories, in accordance with current technical standards and regulations. Located parking lot exits, can be made up of a maximum of 16 units. Enables the occasional parker to use a token, approved by the automatic cashier, to exit the area. Subscribers of the service may use the supplied transponder card or key-chain used to exit the parking lot. Also the exit unit is usually set up with a Gard series Came automatic barrier along with command and safety accessories, in accordance with current technical standards and regulations. PSC1 Auxiliary cashier station The PSC1 manual cashier station enables payments to be managed even when remotely located, without the assistance of a PC. The device, in fact, can read amounts from the transponder tokens and thus validate the exit. PSI16 Auxiliary cashier control Through the PSI16 control unit, up to 16 auxiliary payment stations can be set up. PSIO01 Auxiliary device control The control unit makes it possible to link up auxiliary devices such as traffic lights, luminous signs and metal-mass detectors, and is fitted with 8 output ports. PSSRV and PSINS Traffic light and sign The PSSRV and PSINS traffic light and sign, respectively, are indispensable tools for managing a parking lot. Connected to the system, and to the software, they enable outdoor display of available spaces.