PARKING CONTROL SYSTEM 119GU88-EN. SERIES PS Token INSTALLATION MANUAL PS HW. English

Transcription

1 119GU88-EN PARKING CTROL SYSTEM SERIES PS Token INSTALLATI MANUAL PS HW English EN

2 2 PS TOKEN - Hardware and wiring SUMMARY TOPIC PAGE Parking system diagram and technical notes...4 Description of the units making up the PS BARCODE system...5 Technical data...5 Wiring Diagram...6 Dimensions, and anchoring bases...7 RBMP1 standard card description...9 PSR1 (PSE4000 PSU4000) basic card description...10 PSCA1 (PSC4000) card - description...11 PC30 description...12 PSI16 Auxiliary cash register control description...13 PSC1 Auxiliary cash registers description...14 PSIO1 Auxiliary device control - description...15 PSM4000 connections - (RBMP1) <--> Display <--> PC30 <-->PC...16 Display connections details...17 PSM4000 Connections - (RBMP1/PSI16) <--> PC via modem...18 Connections RBMP1 <--> PSR1 (PSE/PSU4000), PSCA1 (PSC4000) and PSF2 (PS6000/1)...19 PSM4000 connection (RBMP1) <--> Traffic lights...20 PSM4000 connections (RBMP1) <--> digital inputs...21 PSM4000 connections (RBMP1) <--> PSI16 and auxiliary (PSC1) cash registers...22 PSM4000 Connections (RBMP1) <--> PSIO PSE/PSU4000 Connections <---> Bar or other automated devices...24 Connections for the PSE4000 <---> Electromagnetic sensor (Coil)...25 Collegamenti PSE/PSU4000 <---> sensore transponder TSP PSCA2 + PSF2 (PSC6000/PSC6001) cards description...27 PSC6000/PSC6001 Connections...29 PSM4000 connections (RBMP1) <--> PSF2 (PSC6000/1)...30 Logical address assignation system components...31 List of system device addresses...32 Token loading procedure on PSE Token unloading procedure on the PSU Token issuing procedure...35 Coin loading procedure for the PSC6000/ Paper changing procedure on automatic cash registers...38 Setting the PSC6000/ COIN LOADING window Description...41 Setting the PSC6000/1 WITHDRAW window...42 How to withdraw coins manually...43 How to withdraw coins manually...43 How to withdraw banknotes...43 Setting the PSC6000/1 OPERATIS window...44 Setting the PSC6000/1 VARIOUS window...45 How to select the required language...46 How to change password...46 How to insert a telephone number to notify of any malfunctions...46 Setting the PSC6000/1 PRINTER window...47 How to read the receipt...47 Heating unit...48 RBMP1 DIP Switch Selecting functions...48 Accessing the AUTOMATIC PAY-STATI...49 p. 2 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

3 PS TOKEN - Hardware and wiring 3 INDUSTRIAL PC replacement INDUSTRIAL PC maintenance INDUSTRIAL TOUCH-SCREEN MITOR replacement INDUSTRIAL TOUCH-SCREEN MITOR maintenance VN9 BANKNOTE READER replacement VN9 BANKNOTE READER maintenance COIN VALIDATOR replacement COIN VALIDATOR maintenance COIN SELECTOR replacement COIN SELECTOR maintenance REPORT PRINTER replacement REPORT PRINTER maintenance TICKET DISPENSER replacement TICKET DISPENSER maintenance Replacing the BARCODE FIX-SCANNER p. 3 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

4 4 PS TOKEN - Hardware and wiring Parking system diagram and technical notes PSU4000 Magnetic coil Barrier PSM4000 PSC4000 Barrier PSE4000 Magnetic coil Traffic light The system and its software are able to manage up to 10,000 parking places, with a maximum of 2,500 registered users and 7,500 non-registered users. When designing a parking system one must take into account certain construction factors, in order to achieve maximum usability and safety for users. For example, planning for enough space for cars to steer in and out of the parking space. When driving into the parking lot, there needs to be enough room for the driver to pull up and collect a token or check into the system as a registered user. It is advisable to keep a distance of 2.5 m between the PSE4000 and the barrier. Also, there need to be clearly marked pedestrian transit lanes, featuring both horizontal and vertical signage. This is to prevent accidents and make pedestrian access quick and orderly, which in turn makes it easier for vehicles to access the parking lot. In any event, it is necessary to evaluate the morphology of the system (height differences, low visibility areas and so on) to try and prevent any collisions and dangerous steering, as well as dangerous situations for people in the parking lot. If needed, see to installing (zebra crossings, signage, mirrors, photocells, sensors, etc.) to reduce danger levels. Set up, upstream to the system, a dual-pole cut-off switch, with sectioned off power supply; (magnetothermic switch + differential switch) that has the following characteristics: Magnetothermic switch with maximum cut-off current of 6 A (230 V) or 10 A (120 V); differential switch with 30 ma of sensitivity. Use 4 mm² cables or greater when connecting the single devices to the site's grounding terminal. p. 4 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

5 PS TOKEN - Hardware and wiring 5 Description of the units making up the PS BARCODE system p. 5 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. PSM Manned cash register, complete with RBMP1 electronic control unit, management software, DISPLAY and PC30 interface for connecting up to a PC. PSE Entrance unit complete with sensor for transponder cards and key-fobs and (GET) token dispenser. PSU Steel exit unit complete with sensor for transponder cards and keyfobs and (GET) token collector. PSC Automatic cash register complete with sensor for transponder cards and key-fobs, accepts coins, with (GET) token reader and display; no change return device, with receipt dispenser. PSC Automatic cash register complete with personal computer, coin and banknote reader with change return device and credit card reader. PSC Automatic cash register complete with personal computer, coin and banknote reader with change return device. PSI16 - Interface for connecting up maximum 16 PSC1 units. PSC1 - Manual auxiliary cash register. Together with the PSI16 it provides a pay station without a permanently connected personal computer. PSIO1 - Auxiliary device controller for connecting up to PSSRV traffic lights, PSINS luminous signs, magnetic sensor and safety sensors (8 outputs max.). GET - Gettone transponder. PSINS - Double-sided vacant/full luminous sign. PSSRV- Traffic light with red-green lights, ø 200 mm. SMA - Single-channel magnetic sensor for detecting metallic masses. SMA2 - Dual-channel magnetic sensor for detecting metallic masses. Technical data PS TOKEN Power source Draw when idle PSM4000 Maximum power draw Max power output Protection rating RBMP1 230 V AC 50/60 Hz 35 ma AC PC30 12 V AC 175 ma AC - - IP20 DISPLAY 12 V AC 150 ma AC PSE V AC 50/60 Hz 98 ma AC * 180 ma AC *42 W IP54 PSU V AC 50/60 Hz 72 ma AC * 235 ma AC *55 W IP54 PSC V AC 50/60 Hz 125 ma AC * 200 ma AC *46 W IP40 PSC V AC 50/60 Hz 360 ma AC * 400 ma AC *92 W IP40 PSI V AC 50/60 Hz 35 ma AC PSC1 12 V AC 50/60 Hz 135 ma AC PSIO1 230 V AC 50/60 Hz 60 ma AC * With the heating unit active, the heating coil absorbs an extra 500 ma and requires an extra 90 W of power. ** PSC6000 also featuring a credit card reader. Working temperature - 20 / 55 C

6 COIN Came Cancelli Automatici è una società certificata ISO 9001 per il sistema di gestione della qualità aziendale e ISO per il sistema di gestione ambiantale. Came progetta e produce interamente in Italia. Came cancelli automatici s.p.a. 6 PS TOKEN - Hardware and wiring Wiring Diagram RBMP1 Central station PSM4000 Central control unit Maximum distance between the RBMP1 and the PC30, 1000m PC30 Interface RS232 cable Maximum 5m PC with Windows 98/2000/ xp/vista operating system Display Software RS232 cable Maximum 5m Serial printer via Martiri della Libertà, Dosson di Casier Treviso - Italy tel. (+39) fax (+39) info@came.it PSI16 Auxiliary cash register control PSC1 Auxiliary cash register (maximum 16 units) Serial printer RS232 cable Maximum 5m Maximum distance of the last PSC1, 1000m RS232 cable Maximum 5m PSI01 Auxiliary device control, e.g.: traffic lights magnetic coils luminous signs danger signs sensors (maximum 8 units) Barrier or other automation PSU4000 Exit unit (maximum 16 units) 1.5 mm2 Cables for 230 V a.c. MAGNETIC COIL 1.5 mm2 Cables for 230 V a.c. PSE4000 Entrance unit (maximum 16 units) PSINS PSC4000 Automatic cash register (maximum 8 units) Barrier or other automation PSSRV PSC6000/PSC6001 Automatic Cash Register (maximum 4 units) The system manages up to a maximum of 16 traffic lights that may be controller by either the RBMP1 or the PSI01 card????board??? Other unit (PSU4000 PSE4000 PSC4000 PSC7000/1) maximum distance between the RBMP1 and the last unit, 1000m * Suggested cable non-screened multi-pair braiede (CAT 5 - U/UTP - AWG 24) - ** Cable RS232, max 5 m - *** Cable Cross Null Modem, max 1.5 m. N.B. Computers and serial printers with relative cables are not supplied by Came. p. 6 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

7 PS TOKEN - Hardware and wiring 7 Dimensions, and anchoring bases PSE Base di ancoraggio ø 12.5 ø 70 ø p. 7 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. PSU4000 Anchoring base ø 12.5 ø COIN

8 8 PS TOKEN - Hardware and wiring PSC Anchoring base ø 12.5 ø PSC6000/ Anchoring base ø 13 ø 150 ø Secure, in stable fashion, the cabinets on suitable foundation concrete slabs. Use proper size dowels, in terms of diameter and length. Warning: a loose fitting may compromise the proper use of the tools and constitute a hazard 1755 p. 8 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

9 PS TOKEN - Hardware and wiring 9 RBMP1 standard card description p. 9 - Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 5 6* 1- Line fuse 315mA 2- Circuit protection fuse 630mA 3- Not used 4- Not used 5- Terminal for connecting up the battery and battery charger (BN1 optional) 6- Power source terminal * board 7- Terminals for connecting devices to be managed (i.e. automation devices, alarms, traffic lights, etc.) Terminal for connecting the PC30 9- Terminal for connecting the PSE/PSU units 10- Terminals for connecting incoming digital devices 11- Warning LED light for circuit on and communication underway 12- Modem connection (or PSI16 if used) 13-5-way DIP Switch (for function detailed on page 45) The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply.

10 10 PS TOKEN - Hardware and wiring PSR1 (PSE4000 PSU4000) basic card description * Terminals for connecting to transformer 2-5A token unit protection fuse 3- Power source and 5A heating element protection fuse 4- Terminals for powering * 230 V a.c. card 5- Terminals for connecting power to internal heating unit 6- Thermostat contact to monitor heating unit (see p. 45) 7-24V a.c. output 8- Token unit power source 9- Motor command micro-switch 10- Terminals for connecting the devices that need to be commanded (i.e. automations) 11- Token request button contact 12- Terminal for connecting the magnetic coil (only on token enabled PSE4000 units) 13- Terminals for connecting sensors and keyboard 14- Terminals for connecting to the RBMP1 or to another PSR1 or to a REM 15- Token present reader sensor connection 16- Connection to TSP00 sensors 17- Token quality control contact 18- Connectors for (R700 R800) signal decoding cards 19- Circuit On warning LED light 20- DIP Switch selector 21-1A circuit protection fuse The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

11 PS TOKEN - Hardware and wiring 11 PSCA1 (PSC4000) card - description TRANSFORMER TERMINAL BLOCK L1T L2T 24V 0 CTROL BOARD FUSE 1A PROGRAMM./EMULATOR CTROL BOARD PSCA1 R700 2 LINE FUSE 5A WARNING! V1 V2 V3 6 1* L N POWER SUP. RESISTANCE 230V AC THERMOSTAT CTACT OUTPUT 24V AC BARRIER COMMAND CNECTI TO PSCAR1 A B GND 1 A B GND 2 S1 GND TSP00 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 1 - Terminals to power the * 230 V a.c. card 2 - Terminals for connecting power to internal heating unit 3 - (Control board) circuit protection fuse 4 - Circuit LED warning light 5 - DIP Switch selector 6 - Connector for (R700) signal decoding cards 7 - Terminals for connecting to the RBMP1 or to another PSCA1 or to a PSR1 The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. 7

12 12 PS TOKEN - Hardware and wiring PC30 description V a.c. power input 2 - RS232 Serial port for connecting up Personal Computer 3 - Terminals for connecting up RBMP1 (RS485 serial port) 4-12V a.c. power supply unit 5 - Cable complete with RS m connectors 6 - Keyboard for memorising S5000/S6000/S7000 selector codes Area for TST01 Card (proximity card) memorisation and GET token reading 8 - Power LED warning light 9 - LED warning light for code or proximity card reading The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. 2 1 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

13 PS TOKEN - Hardware and wiring 13 PSI16 Auxiliary cash register control description CTROL BOARD PSI16 PROGRAMMING V1 V2 V3 V4 V5 LINE FUSE 315mA A B GND 1 A B GND 2 A B GND 3 A B GND 4 A B GND 5 A B GND 6 A B GND 7 A B GND 8 1 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. L 2* N CTROL BOARD FUSE 630 ma 1 - Power surge protection fuse 3 A B GND 2 - Terminals for powering the 230 V a.c. * circuit board??? 3 - Circuit protection fuse (Control Board) 4 - Terminals for connecting PS13 units 9 A B GND 10 A B GND 11 A B GND 12 4 A B GND 5 - Power on warning LED light 13 A B GND 14 A B GND 6 - RS232 connector for connecting up RBMP1 card 7 - RS232 connector for connecting up MODEM The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. Have in place a suitable dual pole cut-off switch with minimum contact openings of 3 mm, and section the power supply; 15 A B GND 16

14 14 PS TOKEN - Hardware and wiring PSC1 Auxiliary cash registers description The PSC1 unit is an auxiliary cash register, and as such it allows occasional user exits. This peripheral unit is much used in shopping malls or supermarkets, as it allows several units to be installed to grant free or discounted parking to shoppers V a.c. power input 2 - Connector for serial printer 3 - Connector for connecting up to PSI V a.c. power supply unit Command keyboard 6 - Power on warning LED light 7 - GET transponder token clearing reader 8 - Display 1 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

15 PS TOKEN - Hardware and wiring 15 PSIO1 Auxiliary device control - description p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 1* 1- Terminals for powering te 230 V a.c. board 2 - Power surge protection fuse 3 - PSIO1 Board protection fuse 4 - Terminals for connecting to RBMP1 or to another PSIO1 5 - Terminals for connecting up input devices (Coils, Photocells, etc.) DIP Switch 7 - Relay warning LED light 8 - Terminals for connecting up control devices (i.e. traffic lights, magnetic coils, etc.) 9 - Communication warning LED light 10 - Board power warning LED light The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. Have in place a suitable dual pole cut-off switch with minimum contact openings of 3 mm, and section the power supply; 7

16 16 PS TOKEN - Hardware and wiring PSM4000 connections - (RBMP1) <--> Display <--> PC30 <-->PC Personal Computer PC30 GND B A 1.5 M CABLE for RS232 serial ports complete with connectors Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) Display connections details * AWG24 cable connection colours White/Orange braided on GND White/Green braided to split: White on A Green on B Insulate the remaining pairs. Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) RS V a.c. power supply unit for 230 V a.c Hz mains Working temperature between -20 to +50 C RBMP1 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

17 PS TOKEN - Hardware and wiring 17 Display connections details 12V a.c. power supply unit for 230 V a.c Hz mains Working temperature between -20 to +50 C Serial printer NOT INCLUDED Required features characters per line 24 Serial Baud Rate Character Parity Flow control New paragraph RS bps 8 Bits none X / XOFF Enabled on CR Cable* NOT INCLUDED Suggested type: non-screened, twisted multi-paired (CAT 5 U/ UTP AWG24) p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) * AWG24 cable connection colours White/Orange braided on GND White/Green braided to split: White on A Green on B Insulate the remaining pairs. RBMP1 N.B. Be careful with the order of the wires, the colour should match the display and the RBMP1 (A B GND).

18 18 PS TOKEN - Hardware and wiring PSM4000 Connections - (RBMP1/PSI16) <--> PC via modem Warning! The telephone number which will be inputed to make the call is that of the modem connected to the RBMP1 PC for remote control Built in or external modem Telephone line RBMP1 or, if present, PSI16 RS232 cable MODEM Warning!! Each time you hook up a modem, cut off and power back up again the RBMP1 board Communication takes place among a PC, its modem, the receiving modem and the RBMP1, during connection any parameter can be modified, and any information may be read. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

19 Line B* Line A* PS TOKEN - Hardware and wiring 19 Connections RBMP1 <--> PSR1 (PSE/PSU4000), PSCA1 (PSC4000) and PSF2 (PS6000/1) Two-way connection: the RBMP1 may be situated along any point of the cable route RBMP1 RBMP1 PSR1 Between the first and last PSR1/PSACA1/PSF2, la the distance (meaning the route of the connection cable) must be 1000 m long maximun PSCA1 PSCA2 PSCA1 Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. Each unit is identified by the RBMP1 thanks to progressive sequential numbering, independently from the position along the connection cable route; such numbering (also known as an address) must be set on the relative DIP Switch on the peripheral unit s board (Entrance or Exit units and automatic cash register) PSR1/PSCA1/PSF At the subsequent* PSR1/PSCA1/PSF2 (entrance and exit connectable on either terminal boards 1 or 2) *The PSR1 cards equip the PSE/PSU4000 entrance/exit units, while the PSCA1s equip the PSC4000/1 cash registers, and the PSCA2s equip the PSC6000/1 cash registers. * AWG24 cable connection colours White/Orange braided on GND White/Green braided to split: White on A Green on B Insulate the remaining pairs. PSR1/PSCA1/PSF2 At the subsequent* PSR1/PSCA1/PSF2 (entrance and exit connectable on either terminal boards 1 or 2)

20 20 PS TOKEN - Hardware and wiring PSM4000 connection (RBMP1) <--> Traffic lights 230 V a.c. N = Black = GREEN/FREE M = Brown = RED/FULL B = Blue = Common N M B Partial traffic lights, associated to different floors or sectors, up to a maximum of 8, controlled by standard issue software. The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

21 PS TOKEN - Hardware and wiring 21 PSM4000 connections (RBMP1) <--> digital inputs Digital inputs are use to connect up the magnetic coils which instantly provide a count of the number of vehicles in the parking facility, they command the traffic lights independently of the PSE/PSU4000 entrance and exit units. They are often used in multi-level parking, or ones with one entrance and one exit. The coils may be used to obtain an exact count of the number of vehicles on each level, which provides and exact number of free spaces on each parking level. Example of multi-level parking with vehicle count coils on each level. Traffic light Traffic light Exit magnetic coil Entrance magnetic coil Traffic light PSM4000 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. PSU4000 PSC4000 RBMP1 PSE4000 Entrance magnetic coil Traffic light Method to connect the extra RBMP1/PSIO coils, to count the exact number of cars at each floor. A tw-channel detector device such as th e SMA2 is preferable, used in mono-directional mode. Also see product literature. Exit SMA2 Entrance SMA2

22 22 PS TOKEN - Hardware and wiring PSM4000 connections (RBMP1) <--> PSI16 and auxiliary (PSC1) cash registers 12V a.c. power supply unit for 230 V a.c Hz mains Working temperature between -20 to +50 C PSC1 Serial printer NOT INCLUDED Required features characters per line Serial Baud Rate Character Parity Flow control New paragraph 24 RS bps 8 Bits none X / XOFF Enabled on CR (GND) Diagram for connecting up to the control board s main (RBMP1) panel of the PSI16 auxiliary cash registers, and for connecting to the PSC1 auxiliary cash registers, maximum distance 1000 m. * AWG24 cable connection colours White/Orange braided on GND White/Green braided to split: White on A Green on B Insulate the remaining pairs. RBMP1 (B) (A) RS232 PSI16 Cable NOT INCLUDED for RS232 serial ports Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) PSI16 Warning!: connect the adapter cable supplied with the PSI16. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

23 PS TOKEN - Hardware and wiring 23 PSM4000 Connections (RBMP1) <--> PSIO1 RBMP1 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. * AWG24 cable connection colours White/Orange braided on GND White/Green braided to split: White on A Green on B Insulate the remaining pairs. TRANSFORMER TERMINAL BLOCK LINE FUSE 5A L 230 V 0V 24V N 230V AC U2 CTROL BOARD FUSE 630mA A B GND A B GND PSIO1 Nc NC No NO C Nc NC No NO C Nc NC No NO C Nc NC No NO C Nc NC No NO C Nc NC No NO C Nc NC No NO C Nc NC No NO C OUT 1 OUT 2 Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) PSIO1 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT V1 V2 V3 V4 V5

24 PSR COIN PSR PS TOKEN - Hardware and wiring PSE/PSU4000 Connections <---> Bar or other automated devices Connection is the same for either the PSE unit or the PSU unit COIN PSR p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

25 PSR COIN PS TOKEN - Hardware and wiring 25 Connections for the PSE4000 <---> Electromagnetic sensor (Coil) The detection metal mass detector sensor can only connect to the PSE4000 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. Electromagnetic metal mass (vehicle) detection sensor PSR

26 COIN PS TOKEN - Hardware and wiring Collegamenti PSE/PSU4000 <---> sensore transponder TSP00 A GREEN LED indicator light inside the TSP00 means the reader is not properly set. A RED LED indicator light inside the TSP00 means the reader is properly set. Transponder reader TSP00 for proximity Card Proximity card TST01 The connection is the same for either the PSE or the PSU unit COIN RED = S1 BLACK = GND PSR1 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

27 PS TOKEN - Hardware and wiring 27 PSCA2 + PSF2 (PSC6000/PSC6001) cards description PSCA2 managing primary components L1T L2T 35V 24V 0V LAMPADA p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 3 4* R700 L N NC NO C A B GND KEY1 K KEY2 TAMPER AUX OUT S1 GND CSENSO STAMPANTE MITOR PC OUT PC485 TSP00 TASTIERA 1- Terminals for connecting to transformer 2-6.3A Card protection fuse A Power surge protection fuse V power source (from PSF2) 5- Terminals for connecting indoor courtesy lamp 6- Connector for connecting RS232 PC cable 7- Connector for processing banknotes 8 - Plug connector for POS system 9 - Change return processing connector 10 - Token dispenser connection 11- External keyboard connector 12 - R700 signal decoding card connector 13 - Cash register address DIP Switch 14- Connector Plug for printer ICM330 badge reader unit connector Contact linking terminal for cash register configuration (closing the contact causes a keyboard to appear on the monitor) 17- Connection to TSP00 sensors 18- Auxiliary output???exit??? Terminal clip (not used) 19- Terminal clip for open cash register warning 20- Terminal clip for connecting sensor on open cash register keys 21 - Terminal clip already connected 22 - Output terminal clip 23- Terminal clip for powering PC Monitor 24 - Terminal clip for Printer power 25- Power LED warning light

28 28 PS TOKEN - Hardware and wiring PSCA2 + PSF2 (PSC6000/PSC6001) cards description PSF2 managing auxiliary components 1* L N LAMPADA TERMOSTATO RESISTENZA HELP CITOFO A B GND Terminals for powering the 230 V a.c. * board 2 - Terminal clip for connecting internal lamp (already connected) 3 - Terminal clip for connecting the internal thermostat (already connected) 4 - Terminal clip for connecting anti-freeze heating element (already connected 5 - Terminal clip for connecting HELP button 6- Terminal clip for connecting a possible intercom 7- Terminal clip for connecting automatic cash register to other cash registers or parking facility components 8- Already connected The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

29 L N LAMPADA TERMOSTATO RESISTENZA HELP CITOFO A B GND PS TOKEN - Hardware and wiring 29 PSC6000/PSC6001 Connections Overall, the auxiliary and utility inputs inside the cash register, are rated for a maximum of 1A 250W p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 230 V 50/60 Hz L N Already connected LAMPADA TERMOSTATO RESISTENZA HELP CITOFO A B GND Already connected button Intercom Warning! Perform the grounding directly onto the frame of the cash register, exactly as shown in the photograph. At the subsequent* PSR2/PSF2 (entrance and exit connectable on either terminal boards 1 or 2)

30 30 PS TOKEN - Hardware and wiring PSM4000 connections (RBMP1) <--> PSF2 (PSC6000/1) RBMP1 L * AWG24 cable connection colours White/Orange braided on GND White/Green braided to split: White on A Green on B Insulate the remaining pairs. N LAMPADA TERMOSTATO RESISTENZA HELP CITOFO A B GND Cable* NOT INCLUDED Suggested type: nonscreened, twisted multipaired (CAT 5 U/UTP AWG24) p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

31 PS TOKEN - Hardware and wiring 31 Logical address assignation system components For the RBMP1 to communicate with the other connected devices (i.e. PSE, PSU, PSU, PSI01 and PSC7000/1) each of these must be assigned a univocal address; set the DIP Switches in the their control boards as shown in the following pages. ND ND ND PSIO NC A NO B GND C NC A NO B GND L CN NC A NO B GND C NC A NC ANO B GND NO BC GND C1 2NC A 3 BNO 4 GND 5NC AC 6 NO B7 8GND NC A 9C 10NO B GND C NC A NO BNC A GND NO BCGND C NC A NO B GND C NC A NO B GND C NC A NO B GND C NC A NO B GND C OUT 3 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com TRANSFORMER TERMINAL BLOCK LINE FUSE 5A OUT 4230V AC 230 V 0V 24V U2 PSIO1 OUT 5 CTROL BOARD FUSE 630mA OUT OUT 1 6 A B GND A B GND OUT OUT 7 OUT V1 4 V2 5 6 V3 7 V4 8 9 V V1 4 V2 5 6 V3 7 V4 8 9 V V1 V2 V3 V4 V5 OUT OUT 8 4 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com PSIO1 OUT 5 OUT NC A NO B GND C NC A NO B GND C NC A NO B GND C NC A NO B GND C NC A5 6 NO B7 NC NO C NC NO C GND 8 NC C9 10 L N A A NO B GND C NC A NO BNC A GND NO BC 1 B2 GND A7 8B 9GND 10 GND C NC A NO B GND C NC A NO B GND C NC A NO B GND C NC A NO B GND C OUT 3 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com TRANSFORMER TERMINAL BLOCK LINE FUSE 5A TRANSFORMER TERMINAL BLOCK OUT 4230V AC LAMPADA A B GND A B GND LINE FUSE 5A 230 V 0V 24V U2 PSIO1 OUT 5 CTROL BOARD FUSE 630mA OUT OUT 1 6 A B GND A B GND OUT 2 OUT 7 OUT 3 OUT OUT 8 4 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com PSIO1 OUT 5 OUT 6 OUT NC A NO B GND C NC A NO B GND L CN NC A NO B GND C NC A NC ANO B GND NO BC GND C NC A BNOGND NC AC NO B GND NC AC NO B GND C NC A NO BNC A GND NO BCGND C NC A NO B GND C NC A NO B GND C NC A NO B GND C NC A NO B GND C OUT 3 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com OUT 4230V AC 230 V 0V 24V PSIO1 U2 OUT 5 CTROL BOARD FUSE 630mA A B GND A B GND TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com OUT OUT OUT OUT 7 OUT 3 PSIO V1 V2 V3 V4 V5 OUT OUT 8 4 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com PSIO1 C NO B GND C NC A NO B GND C NC A NO B GND C NC A NO B GND C NC R700 A NO B GND C NC A NO B GND C NO B OUT GND C NC 3 A BNOGND C NC A NO B GND C NC A NO B C NC NO C NC NO C NC NO C NC NO C OUT 4 OUT 5 OUT GND 6 A B OUT GND A B GND A B GND1 2A 3B GND 4 7 OUT 8 T ITOR PC p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. OUT 2 TRANSFORMER TERMINAL BLOCK 230 V 0V 24V OUT 3 CTROL BOARD FUSE 630mA OUT 4 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com OUT 5 NC NO C A B GND S1 GND CSENSO KEY1 K KEY2 TAMPER AUX OUT OUT PC485 TSP00 TASTIERA LINE FUSE 5A U PSR1 PSE4000 PSR1 PSU4000 PSCA1 PSC4000 PSIO1 Device control extension PSCA2 PSC6000/6001 A B GND A B GND OUT The flashing LED indicator means proper dialogue is taking place with the RBMP1 board OUT 7 The flashing LED indicator means proper dialogue is taking place with the RBMP1 board. OUT 5 PSIO1 OUT V1 V2 V3 V4 V5 OUT OUT OUT 7 TAMPER P1 P2 P3 P4 Com P5 P6 P7 P8 Com OUT 8 The flashing LED indicator means proper dialogue is taking place with the RBMP1 board. OUT 8 The flashing LED indicator means proper dialogue is taking place with the RBMP1 board. OUT 8 The flashing LED indicator means proper dialogue is taking place with the RBMP1 board. default default default default default V1 V2 1 V3 2 V4 3 4 V V1 V2 V3 1 2 V4 3 4 V V1 V2 V3 V4 V V1 V2 V3 V4 V5

32 32 PS TOKEN - Hardware and wiring List of system device addresses PSE4000 Number of serial position The DIP Switches on the various cards are factory-set to the n.1 position. Set Dip-switch 10 to in case a termination is necessary on RS485 line. Switch * N 1 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 2 OFF OFF OFF OFF OFF OFF OFF OFF N 3 OFF OFF OFF OFF OFF OFF OFF OFF N 4 OFF OFF OFF OFF OFF OFF OFF N 5 OFF OFF OFF OFF OFF OFF OFF OFF N 6 OFF OFF OFF OFF OFF OFF OFF N 7 OFF OFF OFF OFF OFF OFF OFF N 8 OFF OFF OFF OFF OFF OFF N 9 OFF OFF OFF OFF OFF OFF OFF OFF N 10 OFF OFF OFF OFF OFF OFF OFF N 11 OFF OFF OFF OFF OFF OFF OFF N 12 OFF OFF OFF OFF OFF OFF N 13 OFF OFF OFF OFF OFF OFF OFF N 14 OFF OFF OFF OFF OFF OFF N 15 OFF OFF OFF OFF OFF OFF N 16 OFF OFF OFF OFF OFF PSU4000 Number of serial position Switch N 1 OFF OFF OFF OFF OFF OFF OFF OFF N 2 OFF OFF OFF OFF OFF OFF OFF N 3 OFF OFF OFF OFF OFF OFF OFF N 4 OFF OFF OFF OFF OFF OFF N 5 OFF OFF OFF OFF OFF OFF OFF N 6 OFF OFF OFF OFF OFF OFF N 7 OFF OFF OFF OFF OFF OFF N 8 OFF OFF OFF OFF OFF N 9 OFF OFF OFF OFF OFF OFF OFF N 10 OFF OFF OFF OFF OFF OFF N 11 OFF OFF OFF OFF OFF OFF N 12 OFF OFF OFF OFF OFF N 13 OFF OFF OFF OFF OFF OFF N 14 OFF OFF OFF OFF OFF N 15 OFF OFF OFF OFF OFF N 16 OFF OFF OFF OFF PSC4000 Switch Number of serial position N 1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF N 2 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 3 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 4 OFF OFF OFF OFF OFF OFF OFF OFF N 5 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 6 OFF OFF OFF OFF OFF OFF OFF OFF N 7 OFF OFF OFF OFF OFF OFF OFF OFF N 8 OFF OFF OFF OFF OFF OFF OFF p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

33 PS TOKEN - Hardware and wiring 33 PSI01 Switch Number of serial position N 1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF N 2 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 3 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 4 OFF OFF OFF OFF OFF OFF OFF OFF N 5 OFF OFF OFF OFF OFF OFF OFF OFF OFF N 6 OFF OFF OFF OFF OFF OFF OFF OFF N 7 OFF OFF OFF OFF OFF OFF OFF OFF N 8 OFF OFF OFF OFF OFF OFF OFF PSC6000/1 Number of serial position Switch 1 2 3* 4** N 1 OFF OFF OFF N 2 OFF OFF N 3 OFF OFF N 4 OFF * (default) Model NV9 bank-bill receiver. OFF MATRIX model bank-bill receiver. ** OFF (default) Model RM5 coin receiver. GIODY model coin receiver. Token loading procedure on PSE4000 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice add the required amount of tokens COIN 1- release the locks, using the apposite keys 2-pull outwards on the PSE4000 unit panel 4-press the button shown to properly position the first token, then close the token dispensino unit back up again. 2 4

34 34 PS TOKEN - Hardware and wiring Token unloading procedure on the PSU release the locks, using the apposite keys 2 2- open the small door COIN 3 3- remove the token inside the container, then close back up again. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

35 PS TOKEN - Hardware and wiring 35 Token issuing procedure - Stop the car atop the metal mass detection coil. - Press the red button on the PSE4000 entrance unit. - Retrieve the token from the tray. The token must be stored carefully for it work when exiting at one of the parking facility s cash registers. Corrugated ø 25 mm flexible tube for signal cables (type U/UTP Cat 5 AWG 24) Corrugated ø 35 mm flexible tube for power cables EXAMPLE OF ENTRANCE AND EXIT CFIGURATI min Safety coil 500 GARD BAR 300 p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. Coil controller Minimum suggested section for the cement base of the devices 150 Coil controller Safety coil 600 EXIT PSU EXIT UNIT PSE ENTRANCE UNIT GARD BAR ENTRANCE 1800 Parked vehicle detection coil Entrance coil controller

36 36 PS TOKEN - Hardware and wiring Coin loading procedure for the PSC6000/1 Release the cash register using the apposite keys Pull on the top section of the cash register to open it (you may need to insert your hand into the coin retrieval well. Once opened, press the button located on the panel box. A software access window will open: Enter the following password (default 1234) directly onto the monitor using the keypad and confirm by pressing E (in case of error, press C to cancel). Once the password is entered, a group of windows will open. Into the window, type WITHDRAW and in the box labelled ENABLE enter the denomination of banknotes accepted for payment; the greater denomination shall also be the minimum value of the coins that the change giving device may hold. changes Click on the SAVE button to validate the p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

37 PS TOKEN - Hardware and wiring 37 In the Loaded Coins box set the number of coins that you are going to actually load into the cash register. The right-hand buttons increase the number, while those on the right, decrease the number. changes Click on the SAVE button to validate the p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. Insert the coins into the apposite container which is located just behind the cash register front-piece, while being careful to enter the exact number of coins registered on the software.

38 38 PS TOKEN - Hardware and wiring Paper changing procedure on automatic cash registers. 1. Release the locks and open the panel-door completely. 2. Cutt off power supply to the printer. 3. Free the roll support by pressing the apposite lock-teeth and removing the side band. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

39 PS TOKEN - Hardware and wiring Insert the new roll. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 6. Place paper in the apposite slit under the roll support - the printer will hook it automatically. Close the panel-door. 5. Power up again.

40 40 PS TOKEN - Hardware and wiring Setting the PSC6000/1 3 Once opened, press the button located on the panel box. 1 Release the cash register using the apposite keys 2 Pull on the handles to open the top section of the cash register. A software access window will open: Enter the following password (default 1234) directly onto the monitor using the keypad and confirm by pressing E (in case of error, press C to cancel). p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

41 PS TOKEN - Hardware and wiring 41 COIN LOADING window Description p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice Touch screen activation button 2- Save settings button 3 - Monetary value reduction column 4 - Box to view the total monetary value contained in the cash register 5- Number of the connected cash register Click on the SAVE button to validate the changes 6 - Box to view the monetary value of each single fraction or coin unit. 7 - Monetary value increase column 8 - END button to conclude various operations. 9- Setting the maximum allowed change N.B.: To load the coins read the instructions on pages 35 and 36. Each time someone pays the toll, the central box (6) will be updates with the number of inserted coins and the lower box (4) will always display the total sum of the value in the cash register

42 42 PS TOKEN - Hardware and wiring Setting the PSC6000/1 WITHDRAW window Manual coin withdrawal button from the cash register (the button only serves to update the software in case coins are manually removed from the cash register). 2 - Automatic withdrawal button. 3- Box which displays the total value of coins to be withdrawn. 4- By selecting boxes on the touch screen, various monetary values to be withdrawn can be entered, depending on the fractions or coin units (0.05, 0.10, ). 5- Touch screen activation button. 6- Manual banknote withdrawal button from cash register (the button only serves to update the software in case banknotes are manually withdrawn from the cash register). 7- Box which displays the total value of banknotes to be withdrawn. 8 - Number of the connected cash register. 9 - By selecting boxes on the touch screen, various monetary values to be withdrawn can be entered. 10- Using these boxes allows you to enable the banknote values that can be inserted into the cash register. 11- Button to save the banknote value settings. 12- END button to conclude the various operations. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

43 PS TOKEN - Hardware and wiring 43 How to withdraw coins manually Open the register with the apposite keys. 2. Activate tbe button located aboe the control panel box. 3. Access the software via password. 4. Use keyboard, enter the number of coins to withdraw for each denomination or just enter the total, leaving the choice of denominations to the register. 6. Manually remove from the container the coins you wish to withdraw. 7. Click on the button with the small hand to update the software. Warning: always check that the entered values and actual coins in the register exactly match. How to withdraw coins manually p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 5 How to withdraw banknotes Open the cash register using the apposite keys. 2. Press the button located on the panel box. 3. Use password to access the software. 4. Use the keypad to enter the number of coins to withdraw. 5. Click on the button (which has a small arrow diagram) 6. The change giving device will automatically dispense the exact number of coins which you have chosen for withdrawal. Warning: always check that the entered values and actual coins in the register exactly match. 1. Open the cash register using the apposite keys. 2. Press the button located on the panel box. 3. Use password to access the software. 4. Use the keypad to enter the number of banknotes to withdraw. 5. Click on the button (which has a small arrow diagram) to update the software. 6. Remove the box containing the banknotes. 7. Remove from the box only the banknotes which you have decided to withdraw. Warning: always check that the entered values and actual coins in the register exactly match.

44 44 PS TOKEN - Hardware and wiring Setting the PSC6000/1 OPERATIS window Button to activate the touch screen keyboard. 4- Operations carried out information window. 2- Cancel file button (once pressed all files will be cancelled) 5- Number of cash register connected. 3- Button to export operations in text format file. 6- END button to conclude various operations. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

45 PS TOKEN - Hardware and wiring 45 Setting the PSC6000/1 VARIOUS window p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. 1 - Software language selection box. 2 - TSAVE language box. 3 - Password change or enter box. 4 - Touch screen activation box. 5 - Button to halt management software and to switch display to operating system. N.B. : To return to the management software, click twice on the following icon: 6 - Cash register components diagnostic box. 7 - Telephone number for Text messaging alarms: by connecting an (optional) GSM modem the software will send a warning Text message in the event of selected malfunctions (see point 9 below). 8 - Button to save diagnostic settings. 9 - Selecting these boxes, activates alarms that in case of system component malfunctions. A Text message is sent if a GSM modem is connected up Number of cash register connected END button to conclude various operations.

46 46 PS TOKEN - Hardware and wiring How to select the required language Open the cash register using the apposite keys. 2.Press the button located on the panel box. 3.Use password to access the software. 4.Select the VARIOUS box. 5.Select the required language. 6.Save the setting. How to change password Open the cash register using the apposite keys. 2.Press the button located on the panel box. 3.Use password to access the software. 4.Select the VARIOUS box. 5.Enter the new password. 6.Re-enter the new password. 7.Save the setting. How to insert a telephone number to notify of any malfunctions Open the cash register using the apposite keys. 2. Press the button located on the panel box. 3. Use password to access the software. 4. Select the VARIOUS box. 5. Enter the telephone number in the given space. 6. Click on the SAVE button to validate the function. Warning: the Test Text message sending function is active only when the GSM modem is connected to the system. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

47 PS TOKEN - Hardware and wiring 47 Setting the PSC6000/1 PRINTER window CAME spa Via Martiri della Liberta 15 TREVISO -- ITALY Per rimborso, rivolgersi a: Mario Rossi c/o Uscita Piazzale Est. machina : p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice Window for entering name of the company managing the parking facility. 2- Button to cancel phrases selected on the Printer Heading. 3 - Button to save Heading on window. 4- Button to activate internal keypad. 5- Window to enter data of person assigned to giving reimbursements in case change is not returned or system malfunction. How to read the receipt Name of the company managing the parking facility Counter for the number of transactions made Amount due Change due If the cash register does not have enough change, the amount not returned is show Receipt issue date CAME Cancelli Automatici S.p.A. via Martiri della Libertà Dosson di Casier TREVISO - ITALY Cassa automatica : Operazione N : 7 tipo : gettone 0F45EB7F Importo : 0,50 Pagato : 0,80 Resto : 0,30 Resto erogato : 0,20 Resto Non erogato : 0, Per Rimborso, rivolgersi a: Ditta Mario Rossi c/o Uscita Piazzale Est. tel Treviso 26/02/2008, 10:12:20 6- Button to cancel phrases selected on Reimbursements. 7- Button to save Reimbursement data on window. 8- Number of cash register connected. 9- END button to conclude carious operations. Number of the automatic cash register which issued the receipt Type of subject used in the calculation Amount paid or inserted Change given Name of company to contact in case of change not given or cash register malfunction

48 48 PS TOKEN - Hardware and wiring Heating unit With condensation and/or extreme temperatures, we suggest switching on the heating unit using the apposite thermostat. Thermostat Heating element RBMP1 DIP Switch Selecting functions DIP Switches 1 and 2 = select s the time available for barrier to open, once token is retrieved from the PSC4000 s tray. DIP Switch 4 = select time available for payment, once token is placed on the PSC4000 s sensor. OFF OFF Dip 1 e 2 OFF...3 seconds Dip seconds. OFF OFF Dip 1, 2 OFF...5 seconds Dip 4 OFF...2,5 seconds (suggested). OFF Dip 1 OFF, seconds OFF Dip 1, seconds N.B.: DIP Switch 3 and 5 not used, leave in the OFF position. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

49 PS TOKEN - Maintenance guide 49 Accessing the AUTOMATIC PAY-STATI CUT OFF THE MAINS POWER SUPPLY. use the supplied keys to open the unit p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. pull towards yourself on the two handles fitted to the front of the unit

50 50 PS TOKEN - Maintenance guide If replacing inner accessories should present any difficulties, remove the unit's front piece by following the following instructions. WARNING! Two or more people are required for this procedure. disconnect the cables Loosen the screw remove the metal plate Remove the panel by moving it to the opening limit switch, lift and pull towards yourself. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

51 PS TOKEN - Maintenance guide 51 INDUSTRIAL PC replacement spare part code -> 119RIR362 unplug all cables beneath the industrial PC Warning! PC power supply = 24 V DC p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. INDUSTRIAL PC maintenance The industrial PC needs periodic maintenance. loosen the four screws

52 52 PS TOKEN - Maintenance guide INDUSTRIAL TOUCH-SCREEN MITOR replacement spare part code -> 119RIR363 unplug the cables beneath the 119RIR362 industrial PC unplug the cables beneath the 119RIR363 monitor INDUSTRIAL TOUCH-SCREEN MITOR maintenance Clean using a moist cloth, specific for PC monitor cleaning. Do not use alcohol or aggressive detergents. loosen the six nuts Warning! Hold the touchscreen monitor with your hand. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

53 PS TOKEN - Maintenance guide 53 VN9 BANKNOTE READER replacement spare part code -> 119RIR365 slightly move the holding tab remove the banknote collector, moving it upwards and towards you. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. press the two tabs to remove the NV9 banknote reader unplug the cable

54 54 PS TOKEN - Maintenance guide VN9 BANKNOTE READER maintenance Maintenance must be done once per month. Warning! Do not lubricate the NV9 banknote reader move the tab to the right open the NV9 banknote reader p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

55 PS TOKEN - Maintenance guide 55 The NV9 banknote reader's capacity is 300, maximum for cleaning inside, use a soft moist nonfrayed cloth. be sure that the sensor lenses are properly cleaned and dry. the lenses on the front sensor must be cleaned with either a wad or a soft brush. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

56 56 PS TOKEN - Maintenance guide COIN VALIDATOR replacement unplug the cable spare part code -> 119RIR360 with a flat head screwdriver, slightly move the holding tab... COIN VALIDATOR maintenance and remove the coin validator. from the support. Maintenance must be done once per month. Use compressed air to clean the coin validator. Warning! Do not lubricate the coin validator. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

57 PS TOKEN - Maintenance guide 57 COIN SELECTOR replacement spare part code -> 119RIG295 unplug the cable p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. loosen the two screws lift and remove from the metal support, the coin selector.

58 58 PS TOKEN - Maintenance guide COIN SELECTOR maintenance Perform periodic maintenance according to the operating conditions (at least once per year). Warning! Do not lubricate the coin selector. clean the coin exit slot, with compressed air clean the inside of the coin selector, moving the holding tab leftwards and using a screwdriver to lift the hatch door. clean using compressed air and a moist unfrayed cloth (including the coin basket) p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

59 REPORT PRINTER replacement PS TOKEN - Maintenance guide 59 spare part code 119RIR361 disconnect the two cables: power and data supplies turn the green knob counter clockwise, until the paper extracts from the printer. Compress the center tabs and remove the white roll holding disc. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. cut automatically. loosen the four fastening screws. once the printer is replaced, cut the paper edge on the roll using scissors. Power up the printer, fit the rolled paper into the corresponding slot, the paper is hooked and

60 60 PS TOKEN - Maintenance guide REPORT PRINTER maintenance Maintenance must be done once per month. Warning! Do not lubricate the report printer. remove the paper by turning the green knob counter clockwise open the black hatch, clean inside the hatch and the rubber cylinder, using a damp cloth and by turning the green knob. TICKET DISPENSER replacement spare part code -> 119RIR359 unplug the two connectors, behind the ticket mover Loosen the four fastening screws p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.

61 PS TOKEN - Maintenance guide 61 loosen the ticket mover fastening screw use a screwdriver the remove the ticket mover TICKET DISPENSER maintenance Maintenance must be done once per month. Warning! Do not lubricate the ticket dispenser. p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice. Replacing the BARCODE FIX-SCANNER spare part code 119RIR358 use compressed air to clean the inside of the ticket mover, without dismantling it. remove the covers from the grooves

62 62 PS TOKEN - Maintenance guide loosen the four fastening screws remove the cable, connected up to the control unit p Manual code: 119GU88-EN v. 5 06/2016 CAME S.p.A. - The data and information in this manual may be changed at any time and without notice.