MILANO LED SETS DIMMABLE SPOTS

Size: px

Start display at page:

Download "MILANO LED SETS DIMMABLE SPOTS"

Malcolm Webster
5 years ago
Views:

1 MILANO LED SETS DIMMABLE SPOTS Item no.: 1M3W-6 / 8 / 10 / 12 Product Specifications INDEX Summary (page 2) Product features (page 2) Milano LED spots (page 2) LED drivers (page 3, 4) LED remote control (page 4, 5 & 6) Cables (page 7) Jumpers (page 7) 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 1

2 Summary Milano LED sets include 6 /8 /10 /12 spots, a dimmable driver and a remote. Milano LED sets are designed to give an excellent light effect in various situations like living areas and spot-light areas. Install your Milano LED set easily. Plug in the set, and you are ready to go! Product Features High light efficiency LED spots. Save up to 70% energy costs compared to traditional lighting. Very low light attenuation LED spots. 50,000 Hours long lifespan, which is ten times more than traditional lighting. Environment friendly. No lead, mercury and other pollution elements. High color purity LED spots to render a more realistic physical color. Great decoration effect and easy installation. Wide application possibilities. No flash contended. Eliminating the traditional visual fatigues caused by traditional light sources. Impact resisted: anti-lightning, no ultraviolet (UV) and infrared (IR) radiation. MILANO LED SPOTS Technical Parameters s Light 1M3W (Milano LED spot) Spot diameter 33 mm Spot height 38 mm Mounting diameter 28 mm Mounting height 35 mm Voltage 3.2 VDC Efficiency 70% Power consumption 3 Watt Luminous flux (lm) 120 Lm Luminous Efficiency 40 Lm / Watt Beaming angle 45 Others Color temperature IP-code Lifetime Main material LED type 3000K Warm White IP65 Backside IP44 Frontside hrs. Aluminum CREE3W 3 years 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 2

LED DRIVERS Technical Parameters LED driver ITL-DD-6 Output Others ITL-DD-6 Output voltage 12-24V Output Amperage 700 ma Output current I 1200mA Compatible with 4, 5 or 6 Lavanto / Milano spots

3 LED DRIVERS Technical Parameters LED driver ITL-DD-6 Output Others ITL-DD-6 Output voltage 12-24V Output Amperage 700 ma Output current I 1200mA Compatible with 4, 5 or 6 Lavanto / Milano spots Voltage VAC Frequency 50/60Hz Power factor (PF) 0.93 Efficiency >82% L115 x W45 x H31 mm IP-rate Technical Parameters LED driver ITL-DD-8 Output Others ITL-DD-8 Output voltage 12-28V Output Amperage 700 ma Output current I 1200mA Compatible with 7 or 8 Lavanto / Milano spots Voltage VAC Frequency 50/60Hz Power factor (PF) 0.93 Efficiency >82% L135 x W45 x H31 mm IP-rate Technical Parameters LED driver ITL-DD-10 / 12 ITL-DD-10 / 12 Output voltage 24-42V Output Output Amperage 700 ma Output current I 1200mA Compatible with 9, 10, 11 or 12 Lavanto / Milano spots Voltage VAC Frequency 50/60Hz Power factor (PF) 0.93 Efficiency >82% L135 x W45 x H31 mm Others IP-rate 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 3

4 Caution 1. The product shall be installed and serviced by a qualified person. 2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is mounted in a water proof enclosure. 3. Good heat dissipation will prolong the working life of the LED driver. Please ensure good ventilation. 4. Please check if the output voltage and current of any LED power supplies used comply with the requirement of the product. 5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector. 6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights. 7. If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself. LED REMOTE CONTROL Technical Parameters LED remote ITL-BT ITL-BT Working temperature -20 ~ 60 C L148 x W40 x H15 mm Net weight 65g Working Voltage 3V (AAA*2) Compatible with ITL-DD-6 / 8 / 10 / 12 RF frequency 2.4 GHz IP-rate 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 4

5 LED REMOTE CONTROL Button description / function LED remote ITL-BT Name Set button ON OFF Brightness + Brightness - Hot brightness key + Hot brightness key - Mode Night light Description / function The SET button is for setting the night brightness and matching code with the driver. Turn on Turn off The brightness will add 1 level each time you press the button. Long-pressing the button means a faster adjustment. The brightness will reduce 1 level each time you press the button. Long-pressing the button means a faster adjustment. The hot brightness keys contain 4 brightness levels (10%, 30%, 70%, 100%). The lights will switch to a higher level each time you press on this button. The hot brightness keys contain 4 brightness levels (10%, 30%, 70%, 100%). The lights will switch to a lower level each time you press on this button. 100% Full light Press the button to go to night light mode (night light settings mode: Under night light mode press the set button and hold on for 10 seconds. After 10 seconds, you re in the night light settings mode. Press the left (brightness +) or right (brightness -) side from the night light key to set the brightness between 1% - 10%. After setting the brightness you want, press the SET button again to save your settings). DIY 1 / DIY 2 Press the DIY 1 or DIY 2 button 3 times to go into the DIY process (the lights will blink). Press the brightness keys to adjust the DIY to your liking. After adjusting the brightness press the DIY 1 or DIY 2 button 1 time to save your settings. The lights will blink again when the operation went successful. Delay button The light will be delay off in 30 seconds. 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 5

6 LED REMOTE How to connect a remote with a driver Matching code operation Every ITL-DD driver can be controlled by every ITL-BT remote. The ITL-BT remotes and ITL-DD drivers work on the same RF frequency. To match a remote with one or more drivers the following steps need to be followed: 1. Connect the LED spots to the junction box(es). 2. Connect the driver with your network voltage. 3. Choose an ITL-BT factory remote. 4. Turn on the power. The lights are on. 5. Press the SET button continuously. 6. Turn off the power. Wait for 5 seconds. 7. Turn on the power. 8. Press the Mode key 3 times within 5 seconds. The brightness of the lights will change. 9. When successfully operated, the driver can now be controlled by the remote. If not, then please reoperate step 4-8. Remark: Each driver can store a maximum amount of 3 remotes (or matching code operations). The 4 th matching code operation on the same driver will overwrite the 1 st matching code operation (remote). Each Remote can be connected with a maximum amount of 3 drivers. How to remove a connected remote from a driver Clear code operation To delete the matched remote(s) with the driver, the following steps need to be followed: 1. Turn on the power. The lights are on. 2. Press the SET button continuously. 3. Turn off the power. Wait for 5 seconds. 4. Turn on the power. 5. Press the Delay button 3 times within 5 seconds after step 4. The brightness of the lights will change. 6. When successfully operated, the connection between the remote(s) and driver is now deleted. If not, then please re-operate step 4-5. Remark: The driver should not be placed in an area with large-scale metal or near strong electromagnetic wave regions; otherwise the communication distance and functionality between the driver and remote will be seriously affected. 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 6

CABLES VERLK2MTRG (2-meters cable) Length VERLK2MTRG 2 meters Compatible with Lavanto /

/ Milano sets JUMPERS (connector pins for empty junction box connections) Jumpers fill the

Like when 4 spots on a 6 connection junction box are connected, there are 2 connections

7 CABLES VERLK2MTRG (2-meters cable) Length VERLK2MTRG 2 meters Compatible with Lavanto / Milano sets VERLK4MTRG (4-meters cable) Length VERLK4MTRG 4 meters Compatible with Lavanto / Milano sets JUMPERS (connector pins for empty junction box connections) Jumpers fill the empty connections in the junction box. Like when 4 spots on a 6 connection junction box are connected, there are 2 connections still empty. Those connections MUST be filled with jumpers. If not filled, the set won t work. 1M3W-6 / 8 / 10 / 12 SPECIFICATIONS 7

Product features. Points: Support parameters setting and firmware upgrade by App. Address programmable. Fast searching. Convenience testing

Product features. Points: Support parameters setting and firmware upgrade by App. Address programmable. Fast searching. Convenience testing Product features Fast searching Address programmable Long-range maintenance Convenience testing Firmware upgrade WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters