Electromotoric actuators

Transcription

1 ACVATIX Electromotoric actuators for Combi-valve types VPI5.., D5 3 SSD3.. SSD8.. SSD6.. SSD3.. operating voltage AC 30 V 3-position control signal SSD8.. operating voltage AC V 3-position control signal SSD6.. operating voltage AC/DC V DC 0 0 V control signal SSD6EP equal-percentage valve characteristic SSD6. operating voltage AC/DC V DC 0 V control signal ominal force > 50 Automatic identification of valve stroke Direct mounting with union nut, no tools required Basic types complete with plug-in connecting cable, length.5 m Optional cable types cable length.5 m,.5 m and.5 m halogen-free cables Manual override and position indication Parallel connection of multiple actuators possible Use For operation of Siemens valves VPI5.. for water-side control of hot and cooling water in heating, ventilation and air conditioning systems. Архангельск (88) Астана +7(77)77-3 Белгород (7)0-3-6 Брянск (83) Владивосток (3)9-8-3 Волгоград (8) Вологда (87)6--59 Воронеж (73) Екатеринбург (33) Иваново (93) Ижевск (3) Казань (83) Калининград (0) Калуга (8) Кемерово (38) Киров (833) Краснодар (86) Красноярск (39) Курск (7) Липецк (7)5-0-8 Магнитогорск (359) Москва (95) Мурманск (85) Набережные Челны (855)0-53- Нижний Новгород (83)9-08- Новокузнецк (383)0-6-8 Новосибирск (383) Орел (86)-53- Оренбург (353) Пенза (8)-3-6 Пермь (3) Ростов-на-Дону (863) Рязань (9)6-6-6 Самара (86) Санкт-Петербург (8) Саратов (85) Смоленск (8)9--5 Сочи (86)5-7-3 Ставрополь (865) Тверь (8) Томск (38) Тула (87)7-0-9 Тюмень (35)66--8 Ульяновск (8)-3-59 Уфа (37)9-8- Челябинск (35) Череповец (80)9-0-6 Ярославль (85) сайт: эл. почта: spt@nt-rt.ru

2 Type summary Standard versions Type reference Operating voltage Positioning time at 50 Hz Control signal SSD3 SSD3/00 ) AC 30 V SSD8 SSD8/00 ) AC V 50 s 3-position SSD6 SSD6/00 ) DC 0 0 V SSD6EP ) AC / DC V 75 s SSD6EP/00 ) SSD6. SSD6./00 DC 0 V Connecting cable.5 m.5 m.5 m.5 m.5 m ) ) Available cable lengths or terminal block connectors refer to "Accessories", page Equal-percentage valve characteristics SSD6.. are UL and cul approved. Accessories Type reference Description Operating voltage Control signal AS3L5 Connecting cable.5 m AS3L5 Connecting cable.5 m AC 30 V 3-position AS3L5 AS6L5 AS6L5 AS6L5 Connecting cable.5 m Connecting cable.5 m Connecting cable.5 m Connecting cable.5 m AC / DC V DC 0 0 V AS6L5HF Connecting cable.5 m, halogen-free, VDE 007- AS8L5 Connecting cable.5 m AS8L5 Connecting cable.5 m AS8L5B Connecting cable.5 m with Batigyr connector AC V 3-position AS8L5 Connecting cable.5 m AS8L5HF Connecting cable.5 m, halogen-free, VDE 007- AS98 Retaining screw for terminal block connectors AS99 Terminal block connector for 3-position actuator SSD8/00 (AC V) AS00 Terminal block connector for DC 0 0 V modulating actuators SSD6/00 Ordering Example: Type Stock no. Description Quantity SSD8/00 SSD8/00 Electromotoric actuator AS99 AS99 Terminal block Delivery Actuators, valves and accessories are packed separately. Items are supplied individually packed. Rev.-o. Overview tables, see page 8. Equipment combinations Type reference D Actuators Valve type Stroke V 00 [l/h] P class Data sheet [mm] VPI5.. VPI5..Q VPI5.. VPI5..Q D5 3 D0, D50 SSD.. SQD.. Combi valves Combi valves with P/T plugs Combi valves Combi valves with P/T plugs P V 00 = volumetric flow, in l/h, through the fully open valve (H 00 )

3 Function / mechanical design When the actuator is driven by DC 0 0 V control voltage or by a 3-position signal, it produces a stroke which is transmitted to the valve stem. The description of operation in this document applies to the valve versions which are fully closed when de-energized (C valves). 3-position control signal SSD3../SSD8.. Voltage at : Stem extends Valve opens Voltage at : Stem retracts Valve closes o voltage at and : Actuator maintains its current position DC V control signal SSD6, SSD6/00 The valve opens / closes in proportion to the control signal at. At DC 0 V, the valve is fully closed (A AB). When power supply is removed, the actuator maintains its current position. ) Actuator is calibrated to 5 mm stroke of VPI5.. Stroke 5 mm (calibrated) ) control signal [V] DC...0 V control signal SSD6., SSD6./00 The valve opens / closes in proportion to the control signal at. At DC V, the valve is fully closed (A AB). When power supply is removed, the actuator maintains its current position. ) Actuator is calibrated to 5 mm stroke of VPI5.. Stroke 5 mm (calibrated) ) control signal [V] DC V control signal SSD6EP, SSD6EP/00 Combi valves VPI5.., D5 3 in combination with SSD6EP.. have an equalpercentage characteristics. The valve opens / closes in proportion to the 5 control signal at. At DC 0 V, the valve is fully closed (A AB). When power supply is removed, the actuator 3 maintains its current position. ) Actuator is calibrated to 5 mm stroke of VPI5.. Stroke 5 mm (calibrated) ) control signal [V]

4 Features and benefits Plastic housing Locking-proof, maintenance-free gear train Manual override with hexagonal socket wrench 3 mm Reduced power consumption in the holding positions Load-dependent switch-off in the event of overload and in stroke end positions Parallel operation of 6 SSD3.., SSD8.. and 0 SSD6.. possible, provided the controllers output is sufficient Terminal block connectors for custom made cables available (only for use with AC V and AC/DC V actuators) Connecting cables with AC V and AC 30 V connectors cannot be mixed up Halogen-free cables available 89Z9 Accessories Retaining screw AS98 86Z0 Type AS98 to secure the cable connector 89Z05 3 The cable connector snaps into position, but can be additionally secured with the retaining screw. Terminal block connectors AS99 AS00 86Z0 For special cable lengths of the AC V and AC/DC V actuators. Type AS99 for 3-position actuators SSD8/00 Type AS00 for DC 0/ 0 V modulating actuators SSD6../00 The terminal block connectors are supplied complete with Mounting Instructions ( ). otes Engineering The actuators must be electrically connected in accordance with local regulations (refer to "Connection diagrams"), page 8. Caution Regulations and requirements to ensure the safety of people and property must be observed at all times! The permissible temperatures (refer to "Technical data", page 6) must be observed. The connecting cable of the actuator may come into contact with the hot valve body, provided the temperature of the valve body does not exceed 80 C. Mounting The Mounting Instructions are enclosed in the product packaging. Assembly is made with the union nut; no tools or adjustments are required. The actuator must be fitted in position 0 (also refer to "Manual override", page 5) without operating voltage. In the case of actuators without connecting cable (SSD../00), the separately ordered terminal block connector and connecting cable must be fitted.

5 Orientation Z0 Installation mm Crimp ferrule on stripped wire of connecting cable. 89Z33 6 mm 6 mm Commissioning Self-calibration Caution ote: Correct calibration is only possible with valve stroke >.5 mm Manual override ote When commissioning, check wiring and the functioning of the actuator. Actuator stem extends (from position 0 to ): Valve opens Actuator stem retracts (from position to 0): Valve closes During commissioning and whenever the operating voltage is switched on, the SSD6.. runs a self-calibration routine. (Valve stroke 0 Max. stroke Setpoint). ever intervene manually in this process. 00 % 0 % 75 s Power O The second or third attempt at calibration occurs automatically after an 8-minute delay. After three failed calibration attempts the actuator stem remains in the extended position and the VPI5.. valves are opened. For valves with strokes <.5 mm, the actuator/valve combination locks after three failed calibration attempts. A 3 mm hexagonal socket wrench can be used to move the actuator to any position between 0 and. If a control signal from the controller is present, then this takes priority in determining the position. To retain the manually set position, unplug the connecting cable or switch off power and the control signal. 89Z t 3 mm 3 mm Z3 Position indicator in position 0: Valve closed 89Z Position indicator in position : Valve open Maintenance! The actuators are maintenance-free. When carrying out service work on the plant, following must be noted: Turn power off (e.g. remove the plug) If necessary, disconnect electrical connections from the terminals The actuator must be commissioned only with a correctly mounted valve in place!

6 Repair Disposal SSD.. actuators cannot be repaired; the complete unit must be replaced. Broken connecting cables can be replaced, see "Accessories", page. The device must not be disposed of together with domestic waste. This applies in particular to the PCB. Legislation may demand special handling of certain components, or it may be sensible from an ecological point of view. Current local legislation must be observed. Warranty The technical data given for these applications is valid only when the actuators are used with the Siemens valves listed under "Equipment combinations", page. The use of the SSD.. actuators in conjunction with third-party valves invalidates any warranty offered by Siemens Switzerland Ltd / HVAC Products. Technical data Power supply Operating voltage Voltage tolerance Rated frequency SSD3.. SSD8.. SSD6.. AC 30 V AC V AC V or DC V ± 5 % ± 0 % ± 0 % ± 5 % 50 / 60 Hz Max. power consumption 6 VA 0.8 VA.5 VA Fuse for incoming cable A, quickblow Control Control signal ) 3-position SSD6.. DC V SSD6... DC 0 V Input impedance for DC 0/...0 V > 00 kω Positioning accuracy for DC 0/...0 V < % of nominal stroke Parallel operation (number of actuators) ) max. 6 max. max. 0 Functional data Run time for 5.5 mm stroke at 50 Hz 50 s 75 s ominal stroke 5.5 mm ominal force > 50 Perm. temperature of medium in the connected valve...0 C Electrical connections Connecting cable of basic types.5 m 3-core to E 6030 / IEC 607 Standards AS 99, AS00 cable diameter wire cross section wire cross section < 5 mm mm AS3L.. 0,75 mm AS6L.., AS8L.. wire cross section 0,5 mm Meets requirements for CE marking: EMC directive 00/08/EC Immunity E Industrial 3) Emission E Residential Low voltage directive 006/95/EC Electrical safety E Protection class to E II III Contamination level E 60730, Class Housing protection Upright to horizontal IP0 to E 6059 UL approbation UL 873 cul approbation C. o. -93 ) ) 3) SSD6EP.. in combination with combi valves VPI5.., D5 3: Equal-percentage valve characteristics Provided the controllers output is sufficient Transformer 60 VA (e.g. Siemens AM38-T00-0EA0) for AC V actuators

7 SSD3.. SSD8.. SSD6.. Environmental compatibility ISO 00 (Environment) ISO 900 (Quality) S (Environmentally compatible products) RL 00/95/E (RoHS) Dimensions / weight Dimensions refer to "Dimensions", page 9 Coupling thread to valve union nut M30x.5 mm Weight 0.35 kg Housing colors Base and cover RAL 7035 light gray eneral ambient conditions Operation E Transport E Storage E Environmental conditions Class 3K3 Class K3 Class K3 Temperature C C C Humidity % r.h. < 95 % r.h % r.h. Connecting cable AS3L.. with SSD Z8en AS8L.. with SSD L 7 6 white black blue 89Z9en 7 White Control signal OPE (AC 30 V) 6 Black Control signal CLOSE (AC 30 V) Blue eutral L =,5 m,,5 m, or,5 m AS6L.. with SSD6.. 8 L 7 6 orange violet red 89Z30en 7 Orange Control signal OPE (AC 0 V) 6 Violet Control signal CLOSE (AC 0 V) Red System potential AC V L =,5 m,,5 m, or,5 m L 8 gray black red 0 8 rey Control signal DC 0/...0 V Black 0 System neutral (- DC V) Red System potential AC V (+ DC V) L =,5 m,,5 m, or,5 m Connection terminals AS99 for SSD8.. 86Z5 Control signal CLOSE Control signal OPE System potential AC V 89Z3 AS00 for SSD Z3 86Z6 System neutral Control signal DC 0/...0 V System potential AC/DC V

8 Connection diagrams SSD3.. L AC 30 V () AF (L) Q Q () () 86A0 Controller Actuator L System potential AC 30 V System neutral, Control signal OPE, CLOSE Q, Q Controller contacts SSD8.. SP AC V AF () Q (0) () Q () 86A0 Controller Actuator SP, System potential AC V S, 0 System neutral, Control signal OPE, CLOSE Q, Q Controller contacts S SSD6.. SP (+) AC V (DC V) AF () () (0) 86A03 SP, S, 0 Controller Actuator System potential AC/DC V System neutral Control signal 0 S (-)

9 Dimensions All dimensions in mm Actuator SSD3.. SSD8.. SSD M M0 Revision numbers Type reference Valid from Rev.-o. Type reference Valid from Rev.-o. SSD3..J SSD6/00..J SSD3/00..J SSD6EP..J SSD8..J SSD6EP/00..J SSD8/00..J SSD6...J SSD6..J SSD6./00..J Архангельск (88) Астана +7(77)77-3 Белгород (7)0-3-6 Брянск (83) Владивосток (3)9-8-3 Волгоград (8) Вологда (87)6--59 Воронеж (73) Екатеринбург (33) Иваново (93) Ижевск (3) Казань (83) Калининград (0) Калуга (8) Кемерово (38) Киров (833) Краснодар (86) Красноярск (39) Курск (7) Липецк (7)5-0-8 Магнитогорск (359) Москва (95) Мурманск (85) Набережные Челны (855)0-53- Нижний Новгород (83)9-08- Новокузнецк (383)0-6-8 Новосибирск (383) Орел (86)-53- Оренбург (353) Пенза (8)-3-6 Пермь (3) Ростов-на-Дону (863) Рязань (9)6-6-6 Самара (86) Санкт-Петербург (8) Саратов (85) Смоленск (8)9--5 Сочи (86)5-7-3 Ставрополь (865) Тверь (8) Томск (38) Тула (87)7-0-9 Тюмень (35)66--8 Ульяновск (8)-3-59 Уфа (37)9-8- Челябинск (35) Череповец (80)9-0-6 Ярославль (85) сайт: эл. почта: spt@nt-rt.ru