expert 5000 Series Modular Universal Testing Systems System Brochure

Transcription

1 expert 5000 Series Modular Universal Testg Systems System Brochure

2 expert 5000 Series Modular Universal Testg Systems A bold and flexible new approach to materials and product test systems. The expert 5000 series testg systems are modular design; you choose the actuator, test frame and controller to meet your testg needs. Each system features a detachable acuator with fast actg servo motor. Actuators are available force capacities from 1kN to 10kN with several actuators capable of performg fatigue tests at frequencies up to 10Hz. Load frames are offered sgle or dual column table top arrangements and ADMET will even custom design a frame when necessary. Two controllers are available. MTESTQuattro(R), a PC based system for more advanced materials and product tests; and the ep2, a standalone digital controller well suited for repetitive quality control testg. The result is a flexible and modular system capable of performg a wide variety of tests. Applications expert 5603 Actuator Sgle Column Frame MTESTQuattro Controller Tension, compression and bend testg accordg to coon ASTM and ISO test specifications. Durability and cyclic fatigue testg on products and materials. Foam testg cludg IFD and constant force pound tests accordg to ASTM D3574. Adhesive peel testg. Furniture, sportg goods and medical device testg. expert 5601 Actuator Dual Column IFD Frame MTESTQuattro Controller Test with Certaty. (800)

3 expert 5000 Series Modular Universal Testg Systems To Configure a Test System, Follow 3 Easy Steps... Step 1: Select an Actuator Actuator Model 5601 Static 5602 Static 5603 Static 5951 Dynamic 5952 Dynamic 5955 Dynamic Contuous Force Peak Force Maximum Speed Actuator Stroke Position Resolution Throat Depth when mounted on 1 Column Frame lbf kn kgf lbf kn kgf /m /m m , , , , , , ,000 3, ,400 12, Load Measurement Accuracy: +/- 0.5% of readg down to 1/100 of load cell capacity. Meets or exceeds ASTM E4, BSENIS : 2004, DIN and JIS B7721 standards. ADMET selfidentifyg load cells are offered with all systems. Stra Measurement Accuracy: +/- 0.5% of readg down to 1/50 of full scale with ASTM E83 class B extensometers. Meets or exceeds ASTM E83 and BSENISO9513: 2002 standards. Maximum Power VA ,760 2,800 3,600 Sgle Phase Voltage VAC Hz , Step 2: Select a Test Frame Sgle Column Frame - Normally used vertical orientation but can be easily re-configured to test the horizontal. Recoended for 5601, 5602 and 5603 actuators only. Total Vertical Test Space 1 Total Lateral Test Space Height Frame Width (Frame Only) Depth 1 Column Notes: 1. Total Vertical Test Space is the distance from the top surface of the base platen to the bottom surface of the movg crosshead, excludg load cell, grips and fixtures. Larger opengs can be accoodated by orderg an extended column frame. (800)

4 expert 5000 Series Modular Universal Testg Systems 2 Column Static Test Frame - Recoended for 5601, 5602 and 5603 actuators only. Frame 2 Column System configured with an expert kN actuator mounted on a 2 column static test frame with MTESTQuattro. Test system is equipped with a three station 90 deg peel fixture with pnuematic grips. MTESTQuattro reads the (3) 10 lbf load cells and calculated average peel force with a displacement wdow. Total Vertical Test Space Space Between Columns Height Width (Frame Only) Depth Column Dynamic/Foam Testg Frame - Compliant with ASTM D3574 Foam Testg Requirements. Frame 2 Column Total Vertical Test Space 1 Space Between Columns Height Width (Frame Only) Depth Base Details Includes 6 dia holes on 20 center Three station fixture for testg the durability of textiles through cyclic loadg. Two column dynamic test frame with expert 5951 actuator for performg constant force pound test accordg to ASTM D3574. Custom Test Frames - Taller, shorter, wider; our engeerg group will configure a design to meet your specifications. Sgle column frame attached to side of ILD frame. Sgle column test frame equipped with expert kN actuator provided with protective enclosure and custom fixturg for testg the adhesive pull off strength of balance weights from automobile wheels. Custom test frame with expert kN actuator for testg matresses and box sprgs accordg to ASTM F1566. Test bed is on rollers and actuator is on a slide so that any pot on the matress can be tested. A sgle column frame is attached to the side of the custom frame allowg the expert 5603 actuator to be easily relocated for perfomg tension tests on dividual matress sprgs. (800)

5 expert 5000 Series Modular Universal Testg Systems Step 3: Select a Controller and Software All ADMET Testg Maches can be equipped with one of two closed loop servo controllers. MTESTQuattro, our most advanced testg system, is a PC-based unit that offers a wide range of flexibility control, data acquisition, analysis, and reportg. The ep2 Digital Controller, a standalone touch panel unit, offers a balance between performance and simplicity. Both controllers feature 8 khz servo update periods and prograable log rates to 1 khz. MTESTQuattro (left) ep2 (right) MTESTQuattro runng on Wdows Controller MTESTQuattro ep2 Digital Controller Interface PC Software Touch Panel Analysis Test Procedures Reportg Extensive calculations library w/ built- ASTM/ISO specification analysis. Use built- or create an unlimited number of simple to complex procedures. Store and organize all data. View and prt user customizable test reports with chart and tables. Standard calculation package for basic testg requirements and QC testg. Save up to six test procedures ep2. Post test, view current results on ep2 screen and send data to PC for reportg usg optional GaugeSafe software. Grips and Accessories Systems can be equipped with a variety of grips, fixtures, environmental chambers and temperature controlled baths to accoodate a wide range of testg requirements. Visit our website for an onle catalog of our standard offergs. ADMET will also custom design fixtures to meet your testg needs. For more accurate stra measurements, extensometers or deflectometers can be added to any ADMET testg System. For more grips formation, please visit Three station 90 deg peel fixture with pnuematic grips. System configured with an expert kN actuator mounted on a 2 column static test frame. MTESTQuattro reads the (3) 10 lbf load cells and calculated average peel force with a displacement wdow. Sgle column frame equipped with expert kN actuator and the ep2 Digital Controller for measurg the flexural properties on endoscope tubg. Custom flex fixture was provided accordg to customer specifications. 51 Morgan Drive Norwood, MA Tel: (781) Fax: (781) Sales@ADMET.com

6 expert 5000 Series Modular Universal Testg Systems Service and Calibration Trag and Service - ADMET testg systems are easy to learn and use. We provide free troductory on-le trag and, if needed, additional on-site trag. Our manuals, tutorials, and trouble shootg guides are updated regularly. We provide free phone and product support through the life of the system. ADMET s on-site service and calibration team cludes over 100 dividuals over 40 locations the USA. Calibration - Customers can setup calibration contracts with ADMET or a private party. All services are A2LA accredited and meet ISO/IEC Guide and ANSI/NCSL Z Morgan Drive Norwood, MA Tel: (781) Fax: (781) Sales@ADMET.com Copyright All rights reserved. ADMET, Inc. Norwood, MA USA