Hand-operated testers for accurate and dependable measurements. in laboratory experimentation, production line testing and quality assurance

Transcription

1

2 Manual Force Tester for Tension and Compression Measurements Model Range CT 50 and FT Model Indication Range [N] Resolution [N] CT FT FT FT FT Universal Tester Model CT 50 Digital Tester Model FT Space-saving and easy to operate testers with manual operation by hand lever for quick measurements. Moveable load bar with precise linear motion, tiltable hand lever on the side; load bar stroke ca. 80 mm; quick change tool fittings with length adjustment facility for tool and fixture assembly; Measuring system for pull and press force tests. High accuracy and dependable measurements. Indication and operation via durable sensor screen with dot matrix LCD display. Rapid internal update rate of Hz for exact force readings. 2 operating modes: - Peak Point Mode with indication of the highest measured force value - Rolling Mode with indication of current force values. Tare compensation. Overload indication. Set-up menu for setting of internal system parameters. Additional functions with FT: set point capability, measured value memory; real time clock; listing output of measured values. Accuracy class: CT 50 class 0.5; FT Testers class Hand-operated testers for accurate and dependable measurements in laboratory experimentation, production line testing and quality assurance Digital Tester Model FTS Easy to operate and space-saving tester with linear drive operated by hand wheel. Self-locking precise linear drive, feed 1 mm per turn of hand wheel, facilitates uniformly applied test loads and holds rated loads without slip. Linear stroke of 150 mm. High accuracy and dependable measurements. Indication and operation via durable sensor screen with dot matrix LCD display. Rapid internal update rate of Hz for exact force readings. Tare compensation. Measured value memory and real time clock. 2 operating modes: - Peak Point Mode with indication of the highest measured force - value. - Rolling Mode with indication of current force values. Set-up menu for setting of internal system parameters and adjustment. Single and listing output of measured values. Overload protection of drive unit and load cell. Accuracy class: Model Range FTS Model Indication Range [N] Resolution [N] FTS FTS FTS FTS FTS

3 Test Stations with motor drive and adjustable test speed Motor Test Station Model ATM Compact test stations for tension and compression tests with motor drive with adjustable test speed, constant test speed for uniformly applied test load. Drive unit with DC motor and precision linear drive, linear stroke 150 mm, drive control unit with manifold functions. Keypad control unit for motor drive operation. Adjustable test speed: Test Stations up to 2000 N nominal load: mm/min. Test Stations with 5 and 10 kn nominal load: mm/min. Test load preset e.g. for non-destructive tests. Break stop function, quick return, continuous cycle operation. High-class measuring system for high accuracy and reproducibility, accuracy class Indication and operation via durable sensor screen with dot matrix LCD display. Rapid internal update rate of Hz consistently captures even critical peak force readings. 2 operating modes: Rolling Mode and Peak Point Mode. Tare compensation, measured value memory, real time clock, single and listing output of measured values, overload indication. Set-up menu for setting of internal parameters and adjustment. Quick-change tool mounting adapters. Test Stations with adjustable test speed for versatile areas of application Design of ATM models with 5 kn and 10 kn nominal load Model Range ATM Model Indication Resolution Range [N] [N] ATM ATM ATM ATM ATM ATM ATM ATM figure above: Insertion and extraction test right figure: Design of ATM models up to 2000 N nominal load Software The MAV PRÜFTECHNIK testers have a serial interface available, over which the measured values can be send to a serial printer or to a PC. The MAV PRÜFTECHNIK offers some special PC software facilitating the data transfer to a PC, the data acquisition, the data evaluation and graphical display of test results. mavstat mavgraph Easy set-up and use Storage of master data Storage of master data Input and view of limits Statistical analysis Graphic display of values Histogram Force/time or force/distance Listing of measured values Zoom function Data base Tabular view of values Printout of report Statistical analysis Archiving Printout of report

4 Compact Material Test Stations with integrated stroke measuring unit Digital Test Station Model MPM Motorized Test Station with precision linear drive, high-class measuring system and control electronics and extensive functions for pull, press, bend, elongation and break tests. Integrated stroke measuring unit for data recording and graphic display of force/distance and force/elongation gradients etc. Test program for repeat tests. Internal measuring rate of Hz and a resolution of increments ensures a high measuring accuracy and reproducibility of test results. Special test sequences and programs. TFT Touch screen display for indication of measured data, set-up parameters, measured curves and operation of displayed operation elements. 2 operating modes: Rolling Mode and Peak Point Mode. Set-up menu for setting of internal system parameters and adjustment. Built-in printer with fan-fold paper. RS232- and Digimatic interface. Adjustable test speed. Test load preset. Load slide stroke: 150 mm. Maintenance-free construction. Accuracy class Test Stations and Test Stands in horizontal or vertical arrangement with extensive functions for simple and complex test situations and specifications Motor Test Stand Model VMP Motorized single column Test Stand for force-elongation measurements with digital force measuring unit and PC control mavgraph 4M Software for operation of the test stand and for data recording and data evaluation with graphic display of measured values. Motor drive unit with adjustable test speed. Test load preset e.g. for nondestructive tests. Ranges: 0-50/100/250/500/1000 N. Operation with standard PC. Load slide stroke: 500 mm. Cycle function. Tare compensation. Force-Distance Graph. Statistical analysis. Printout of report. Tabular view of measured values. Archiving. Maintenance-free construction. Overload protection. Accuracy class: Model Indication Range [N] MPM MPM MPM MPM MPM MPM MPM MPM Vertical Test Stands TS, MTV Space-saving Test Stands in vertical arrangement with modular construction system for optimal adaptation to the individual test requirements. Test Stand TS actuated by sidewise hand wheel Test Stand MTV with motorized drive unit (right figure). Resolution [N]

5 Testers with motor drive for defined test speeds Digital Tester Model FTM Easy to operate and space-saving digital testers for tensile and compressive force tests with motor drive for constant test speed for uniformly applied test load. Drive unit with DC motor and precision linear drive, linear stroke 150 mm, keypad control unit with On/Off-switch and 6 keys for the drive control: each 3 keys per force direction for test speeds 50, 100 and 300 mm/min (customized test speeds on request). Manual operating mode: travel platform drives during drive key actuation, automatic stop after release of drive key. High-class measuring system for high accuracy and reproducibility, accuracy class Indication and operation via durable infrared sensor screen with dot matrix LCD display. Internal measuring rate of Hz consistently captures even critical peak force readings. 2 operating modes: - Peak Point Mode with indication of the highest measured force value - Rolling Mode with indication of current force values. Measuring system with tare compensation, set point capability, measured value memory, real time clock, listing output of measured values and overload indication. Set-up menu for setting of internal parameters and adjustment. Design of FTM models up to 2000 N nominal load Testers with motor drive for constant test speed provide the maximum possible reproducibility of measurement results Model Range FTM Model Indication Resolution Range [N] [N] FTM FTM FTM FTM FTM FTM FTM FTM Design of models FTM 500 and FTM 1000, with tools Clamping Crown SG 90 and Quick Action- Grippers SHA-40/A Clamping Tools and Test Fixtures The versatility of the MAV testing units in combination with suitable clamping tools and test fixtures provides flexible test systems for varying test applications in research, development, quality control and industry. In addition to a large product range of standard tools the MAV PRÜFTECHNIK is specialized in developing customized solutions for special applications.

6