PRIMERGY RX600 S4. System configurator and order-information guide July PRIMERGY Server. Contents

Transcription

1 PRIMERGY RX600 S4 July 2010 Contents Instructions Configuration diagram Configurator 0 0 System software 1 I Basic unit 2 II Processor 3 III Memory 4 IV onboard SCSI / SAS Contr 5 V USB devices / optical devices 6 VI Hard disk drives 7 VII Tape Devices 8 VIII SCSI / RAID controller 9 IX Fibre Channel controller 10 X Communication / Network 11 XI System Management Products (RemoteView) 12 XII National accessories pack Change report PRIMERGY Server

2 PRIMERGY RX600 S4 Status Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements. The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect. Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom. Section III Memory, example There are X memory slots which can be equipped with XXX MB It is permissible to make up to X passes through the memory upgrade options X times S26361-XXX-XXX Memory XXX MB S26361-XXX-XXX Memory XXX MB max. X times per system max. X times per system In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x Please note that there are information symbols which indicate necessary information. For further information see: (extranet) Prices and availability see price list and PC-/System-Architect. Subject to change and errors excepted. Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 17

3 Slot PRIMERGY RX600 S4 Status Configuration diagram PRIMERGY RX600 S4 TOP VIEW System unit ( I ) Extension slots Memory ( III ) SCSI / RAID controller ( VIII ) Fiber Channel ( IX ) Memory Board A Communication/Network ( X ) ( 8 DIMM slots) PCI-Express x4 PCI-Express x4 PCI-Express x4, half length Memory Board B ( 8 DIMM slots) Memory Board C ( 8 DIMM slots) Memory Board D ( 8 DIMM slots) 4 3 PCI-Express x8, half length ( hot-plug ) PCI-Express x8 ( hot-plug ) Processors must be plugged in order according the picture. 2 1 PCI-Express x8 ( hot-plug ) PCI-Express x8 ( hot-plug ) Processor ( II ) Xeon MP 3 Xeon MP 4 Xeon MP 2 Xeon MP 1 FRONT VIEW Accessible drives Tape drives ( VII ) Operating Panel 5.25"x 0.5" bay for CD/DVD Local View LCD Display 5.25"x1.6" Tape Drive Video USB USB USB Operating Panel Hard disk drives ( IV ) hot-plug 8x 2.5" SAS 2.5" SAS 2.5" SAS 2.5" SAS 2.5" SAS 2.5" SAS 2.5" SAS 2.5" SAS 2.5" SAS COM Video USB USB Ether net Ether net Ether net Ether net Servic e LAN REAR VIEW Hot Plug Redundant Power Supply 1. PSU 2. PSU Key: Included in basic unit Option Fujitsu Technology Solutions x86 PRIMERGY Server 3 of 17

4 PRIMERGY-Software Configurators and Release Lists Start "PRIMERGY RX600 S4" PRIMERGY RX600 S4 Status SW - Configurator 32 bit with OEM-Software without OEM-Software for PRIMERGY Server Usage of OEM SW from MS is for PRIMERGY Server not possible under VMware OEM-SW is bound to HW and VMware-Software is not allowed to be ordered - VCMS VirtualCenter Management Server separately. - Virtual Infrastructure 3 Exception: VMware SW For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools, -All configurations, -Software, URL see below. MS - Software: W **) PRIMECLUSTER *) - Windows Server 2003 R2, - Clustering Standard Edition - Load Balancing Enterprise Edition - Additional loose Client-Access-Licenses (CALs) Linux - Software: L **) (not for Web Edition) - Open Enterprise Server ***) - SuSE Linux ES (OEM): LO CITRIX-Software for Windows: W-MF - Presentation Server LoadBalancing Additional User Licences - SuSE Linux ES (Support): LS - Red Hat EL (OEM): LO - Red Hat EL (Support): LS MultiPath, Duplex Data Manager (DDM) W2K; W2K3 Linux (W-DDM) Manageability Software: V Details eg. version numbers are published - RemoteView Software in the separate SW-Configurator - RemoteView Service Board - vpms 2006std - Altiris Server Deployment Backup-Software / Application-Software: U - ARCserve - opensm2 Find detailed software configurators and release lists (OS-matrix / system management) under following addresses: for internal users: for partners: Continue with PRIMERGY HW configurator Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 17

5 PRIMERGY-Software Configurators and Release Lists Start "PRIMERGY RX600 S4" PRIMERGY RX600 S4 Status SW Configurator EM64T with OEM-Software without OEM-Software for PRIMERGY Server Usage of OEM SW from MS is for PRIMERGY Server not possible under VMware OEM-SW is bound to HW and VMware-Software is not allowed to be ordered - VCMS VirtualCenter Management Server separately. - Virtual Infrastructure 3 Exception: VMware SW For all SW products please refer to the corresponding software configurator accessible via the Extranet under "Configuration & Tools, -All configurations, -Software, URL see below. Microsoft - Software: W Linux - Software *) **) only - Windows Server 2003 R2, only - SuSE Linux ES (OEM): LO EM64T Standard x64 Edition EM64T - SuSE Linux ES (Support): LS Enterprise x64 Edition - Red Hat EL (OEM): LO - Additional loose - Red Hat EL (Support): LS Client-Access-Lizenzen (CALs) only MultiPath, Duplex Data Manager (DDM) EM64T Windows, Linux (W-DDM) Manageability Software: V**) only - RemoteView Software EM64T - RemoteView Service Board - RemoteView Diagnosis - vpms 2006std Details eg. version numbers are published in the separate SW-Configurator You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses: for internal users: for partners: Continue with PRIMERGY HW configurator Fujitsu Technology Solutions x86 PRIMERGY Server 5 of 17

6 Start PRIMERGY RX600 S4 PRIMERGY RX600 S4 Status Section I Basic unit PRIMERGY RX600 S4 Systemboard with - Intel 7300 chipset with 1067MHz Frontside Bus Rack unit 4U with - 7 PCIe Slots - 2 hot-plug power supplys (redundant) - 4x PCIe x8 (hot plug) - redundant hot-plug fans - 3x PCIe x4 - LCD-Display for LocalView (Service Display) - SAS RAID 5 Controller with 512MB Cache (BBU as option) - 1 bay (0,5" height) for CD- or DVD-ROM - 2x Dual-Port GBit LAN Controller on-board (4 ports, WOL-capable) - 1x 5.25" bays FH (1,6" high) for accessible drives - integrated Remote Management Controller (irmc S2) - 8 bays for 2.5" SAS HDD`s 32MB attached memory - 2 memory boards ( 3rd / 4th as option) with graphics controller - no Rack- mounting kit included and 10/100Mbit Service LAN-port - CPU and memory of basic units selectable - ServerView Suite Software package via base CPU / memory order codes incl. ServerStart, ServerBooks, Management Software and Updates Base unit wo/ CPU, Memory S26361-K998-V200 Interfaces: Front side 3x USB 2.0 S26361-F3436-E4 1x VGA (15 pin) no TPM Rear Side Disable function for Trusted Platform 2x USB 2.0 Use according to import restrictions 1x VGA (15 pin) 1x RS-232-C (serial, 9 pin) 4x RJ45 (on board LAN) 1x RJ45 (on board service LAN) no PS/2 connection for KB / Mouse S26361-F2735-E106 S26361-F2735-E111 (USB connectivity must be used instead) RMK_F1_RX600 No Rackmount-Kit option telescopic rail, full extraction, Only for loose deliveries 1-hand-mounting No mounting in Racks possible consisting of - 1 pair of telescopic rails with easy-mounting-clips S26361-F2735-L106 RMK_F1_RX600 1x per system A for loose delivery S26361-F2735-L7 S26361-F2735-E7 S26361-F2201-E20 Cable management PC-Rack Cable management PC-Rack Cable arm 3rd P-Rack for loose delivery - for FSC Primecenter / - for 3rd party Datacenter Racks 1x per system S26361-F2201-L20 - not for 3rd party Cable arm 3rd party racks 1x per system for loose delivery Rack Mounting kit for PRIMERGY RX600 S4 must be ordered seperatly PRIMERGY PRIMECENTER- Rack S26361-F2735-E106 RMK_F1_RX600 This kit allows for mounting of RX600 S4 in in FSC 19" DataCenter- and SNP:SY-F1647E301-P PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks. Therefore the mounting kit is variable in depth from 708 +/- 2 bis 786 +/- 2 mm Installation ex works for one - 1 pair of telescopic rails full extraction server or subsystem. - 1 Vario carrier DC-PC-3rd party Rack Hereby the rack will be delivered allows toolless adjustable in depth and easy mounting completely pre-mounted and - 1 bracket PRIMECENTER and DataCentre-Racks is part of the server delivery With racks 12U, 24U, 38U: Installation in PRIMERGY 19" Classic rack is not possible. Systems and components Additionally cable management must be ordered: will be delivered installed in the rack S26361-F2735-L7 Cable management for DC-PC-racks With racks 46U: or optional Systems and components S26361-F2201-L20 Cable management arm for 3rd party racks will be delivered separately PRIMERGY 42/23U rack To be ordered only together with PRIMERGY Classic 19" rack is not supported a PRIMERGY- "Rack-mounting ex factory" PRIMECENTER rack This service is to be ordered once per installable server/storage subsystem, e.g.: in order to get the mounted into the PRIMERGY racks. S26361-K826-V10x In case of the 46 U PRIMERGY rack, this service has to be ordered, refer configurator DC-Rack to get the mounting kits and the cables installed. max. 1x per System Connetion for KVM switch / Rack console - RC23 can be directly connected (via USB connection) A - KVM S2 series needs the KVM S2 Adapter USB<->VGA - Appropriate FSC USB keyboard is S26381-K340-V1* This keyboard also needs USB cable T26139-Y3812-V1 Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 17

7 A PRIMERGY RX600 S4 Status Section II Processor A 4-way processor system requires a multi-processor operating system Later upgrading to a four-way-processor system is also possible Extension CPUs must have identical cache size and clock rate *while stocks last Following CPU s can be configured max. 4x per system As minimum one CPU must be configured Dual-Core CPU`s - 1x 64-bit Intel Xeon MP with 2x 4MB shared SLC (= Second Level Cache), 1066MHz FSB incl. passive heat sink occupies socket for one CPU Xeon MP E7220 (2 cores 2.93GHz, 2x4M, 90W) S26361-F3487-E220 Quad-Core CPU`s - 1x 64-bit Intel Xeon MP (1066MHz FSB) 2x 2MB / 2x 3MB / 2x 4MB SLC, 1066MHz FSB incl. passive heat sink occupies socket for one CPU Xeon MP E7310 (4 cores 1.60GHz, 2x2M, 90W) S26361-F3487-E310 * Xeon MP E7330 (4 cores 2.40GHz, 2x3M, 90W) S26361-F3487-E330 * Xeon MP X7350 (4 cores 2.93GHz, 2x4M, 130W) S26361-F3487-E350 Hexa- / Quad-Core CPU`s - 1x 64-bit Intel Xeon MP (1066MHz FSB) 3x 3MB L2 cache, 12MB / 16MB shared L3 Cache, 1066MHz FSB incl. passive heat sink occupies socket for one CPU Xeon MP E7430 (4 cores 2.13GHz, 12M, 90W) S26361-F3487-E430 Xeon MP E7450 (6 cores 2.40GHz, 12M, 90W) S26361-F3487-E450 Xeon MP X7460 (6 cores 2.67GHz, 16M, 130W) S26361-F3487-E460 B Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 17

8 B PRIMERGY RX600 S4 Status Section III Memory Max. Capacity / Features The system can be equipped with up to 4 memory boards with 8 memory slots each (= 32 DIMM slots max.). Each DIMM slot can optionally be equipped with 1GB, 2GB, 4GB or 8GB FBDIMM modules, so the maximal memory extension is 256GB with 8GB modules on 4 Memory Boards. ECC with SDDC (Chipkill) is standard for RX600 S4. Optional hot-spare memory functionality (redundant memory bank n + 1) and memory protection through Memory Mirroring can be configured in the BIOS. Configuration rules The memory area is logical divided into 2 branches with 2 channels each and 8 DIMM slots per channel. Memory channels are identical with the pysical memory boards and slot numbers match to logical bank numbers. So first slot of each channel respectively board belongs to memory bank 1, the second bank 2 and so forth. For Memory Mirroring mode, optional memory board upgrade kit must be ordered, and identical memory modules pairs are necessary in branch 0 & 1 on each bank. = and = The function Memory Mirroring can be configured per BIOS setup. For mirrored memory configurations the following items have to be considered: - only 50% of the configured memory are realy available as memory space - After non-correctable or too many correctable errors, the mirror takes over immediately and the system remains online. - in mirror configurations system operates with 2-way interleave only, therefore potentially not max. performance To reach max performance, it s recommended to configure optional memory board upgrade kit and distribute the memory module over all 4 board to enable 4-way interleaving In general it is recommended to use identical capacities over the branches / channels, = = = Memory Board C + D ( Standard Configuration ) ( Optional ) Memory Board Memory Board Memory Board Memory Board A B C D slot 8 slot 7 slot 6 slot5 slot 4 slot 3 slot 2 slot 1 channel 1 channel 2 channel 03 channel 4 branch 0 Memory Controllers branch 1 C Fujitsu Technology Solutions x86 PRIMERGY Server 8 of 17

9 C PRIMERGY RX600 S4 Status S26361-F3263-E622 S26361-F3263-E623 S26361-F3263-E624 Memory 2GB Memory 4GB Memory 8GB FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F consisting of consisting of consisting of 2 dual rank modules 2 dual rank modules 2 dual rank modules occupies one slot in a branch occupies one slot in a branch occupies one slot in a branch max. 16x per system max. 16x per system max. 16x per system S26361-F3263-E622 S26361-F3263-E623 S26361-F3263-E624 S26361-F3263-E625 Memory 2GB Memory 4GB Memory 8GB Memory 16GB up to 7x FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F memory consisting of consisting of consisting of consisting of upgrades 2 dual rank modules 2 dual rank modules 2 dual rank modules 2 dual rank modules occupies one slot in a branch occupies one slot in a branch occupies one slot in a branch occupies one slot in a branch max. 16x per system max. 16x per system max. 16x per system max. 16x per system S26361-F3125-E440 Memory Board upgrade Kit consisting of 2 Memory Board for 8 DIMM modules each S26361-F3263-E622 S26361-F3263-E623 S26361-F3263-E624 S26361-F3263-E625 Memory 2GB Memory 4GB Memory 8GB Memory 16GB FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F FBD667 / PC2-5300F up to 8x consisting of consisting of consisting of consisting of memory 2 dual rank modules 2 dual rank modules 2 dual rank modules 2 dual rank modules upgrades occupies one slot in a branch occupies one slot in a branch occupies one slot in a branch occupies one slot in a branch max. 16x per system max. 16x per system max. 16x per system max. 16x per system C Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 17

10 C PRIMERGY RX600 S4 Status Section IV on-board SAS Controller Overview internal SAS / SCSI-cabling of a PRIMERGY RX600 S4 Base Unit Eight SAS ports for Disks optional internal SCSI Contr. Tape Devices integrated 8x internal SAS RAID 2.5" SAS HDD controller SCSI Contr. external Tape Devices A. on-board SAS RAID-Controller for SAS HDD s The system is equipped with a 8-port SAS RAID controller for the connection of the internal SAS HDD s This SAS RAID Controller is equipped with 512MB Cache (suporting the RAID level 0, 1, 5, 10, 50, 6, 60). As option, the on-board RAID Controller can be equipped with a Battery Backup Unit. The following rules apply for the cabling: The cables for the connection of the SAS RAID controller to the disks in the system are includes in the base unit. If an internal tape is configured, an additional SCSI Controller (see section "IIV Tapes devices" ) and cable is needed (see section "IV Hard disk drives / Tapes" ). S26361-F3128-E420 ROM Battery Backup Unit for on-board RAID controller E Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 17

11 E PRIMERGY RX600 S4 Status Section V USB devices / optical devices Setup RX600 S4 by ServerStart is supported with following configurations: no Floppy, no DVD, no CD: remote installation only ( PXE service & DHCP server required) built in CD/DVD or USB CD/DVD, no Floppy disk drive: UNC Network share reachable or USB Floppy connected built in Floppy or USB Floppy, no CD/DVD: USB CD/DVD connected Following USB Components are available 1) USB DVD SM / Blu-Ray External SuperMulti Drive (as soon as released) External Blu-Ray Drive (as soon as released) S26341-F103-L82 S26341-F103-L83 2) USB Keyboard: KBPC PX D, professional keyboard S26381-K340-V120 3) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 S26381-K415-L100 4) USB Memorybird: Memorybird P 4GB, SLC flash S26391-F6047-L104 MyUSBS A910 8GB, MLC Flash S26391-F6048-L208 Additionally a monitor can be connected to the VGA 15-pin interface. S26361-F3123-E1 S26361-F3236-E1 S26361-F3531-E1 CD-RW / DVD drive 0.5" DVD-RW 8x super multi drive Blu-ray Combo slim SATA 24/24/24x / 8x ATAPI all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD 1x CD-RW only with W2K, W3K, Linux only W2K, W3K and Linux BD DL and all CD/DVD formats 0.5 x 5.25", anthracite bezel 0.5 x 5.25", anthracite bezel 0.5 x 5.25", anthracite bezel 1x S26361-F3269-E1 DVD-RW supermulti slim SATA all formats, DUAL/DL, DVD-RAM only W2K, W3K and Linux 0.5 x 5.25", anthracite bezel Section VI Hard disk drives S26361-F3208-E114 S26361-F3208-E573 HD 144GB 10krpm 2.5" HD 73GB 15krpm 2.5" 10000rpm,<4,5ms, 8MB Cache 15000rpm,<4,5ms, 8MB Cache max. 8 SAS 3Gb/s SAS 3Gb/s hot plug/hot replace tray hot plug/hot replace tray max. 8x per base unit max. 8x per base unit F Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 17

12 F PRIMERGY RX600 S4 Status Section VII Tapes devices S26361-F3857-E1 S26361-F3257-E4 RDX drive USB 5.25" internal 4 port SAS RAID Controller GB, 25MB/s, USB 2.0 RDX cartridges must be ordered separately LSI Connector: USB "B" RDX 80GB = S26361-F3857-L80 MegaRAID SAS 1064 with USB cable RDX 160GB = S26361-F3857-L160 no Cache, no BBU incl. description (Ger/US) RDX 320GB = S26361-F3857-L320 RAID 0, 1 & 1E without RDX cartridges SAS 3Gb/sec 1.6 * 5.25", anthracite bezel 4 internal ports PCIe x4, 160mm 1x S26361-F2848-E3 S26361-F3459-E3 S26361-F3225-E3 Tape drive DDS Gen5 SCSI Tape drive LTO3HH Ultrium SCSI Tape drive DDS Gen6 SCSI S26361-F2848-E31 (only for OBDR) 400GB, 60MB/s, U320 SCSI 80GB, 6MB/s, U160 SCSI DDS-G5 for One buttom dis. recov. Connector: HD68 Connector: HD68 36GB, 3MB/s, U2W SCSI without cable without cable Connector: HD68 incl. description (Ger/US) incl. description (Ger/US) without cable data and cleaning cartridge data and cleaning cartridge incl. description (Ger/US) 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel data and cleaning cartridge 1.6 * 5.25", anthracite bezel S26361-F3128-E101 internal SCSI-Cable for connetion of internal Tape devices S26361-F3270-E1 SCSI U320 Controller Adaptec SCSI Card 29320LPE PCIe x1, int: LVD HD68 ext: VHDCI 68pin max. 1x per tape drive If no SCSI Backup drive is configured ex works, for later installation the internal SCSI-Cable and the following SCSI controller has to be ordered as lose delivery S26361-F3128-L101 S26361-F3270-L1 S26361-F3963-E3 Tape drive LTO4HH Ultrium SAS 800GB, 120MB/s, SAS 3Gb Connector: SATA incl. SAS cable incl. description (Ger/US) data and cleaning cartridge 1.6 * 5.25", anthracite bezel G Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 17

13 G PRIMERGY RX600 S4 Status Section VIII SCSI / SAS RAID controller A. SCSI Controller for internal or external backup drives (External only the PRIMERGY SX10 is released) S26361-F3270-E1 SCSI U320 Controller For internal and external SCSI Backup drives Adaptec SCSI Card 29320LPE an additional SCSI controller has to be configured max. 2x PCIe x1, The concurrent usage of the internal and external ports is not supported! int: LVD HD68 For an internal SCSI backup drives is one SCSI controller necessary. ext: VHDCI 68pin Max. 2 PCI-Controller are possible in the basic unit!! max. 2x per system B. SAS controller for external backup drives S26361-F3271-E1 SAS Controller 3Gb/s 8 port LSI SAS3442E-R max. 2x PCIe x4, int: 4 port ext: 4 port max. 2x per system C. SAS RAID controller for JBOD subsystems max. 2x S26361-F3890-E1 S26361-F3890-E20 8 port SAS RAID Controller 8 port SAS RAID Controller LSI LSI MegaRAID SAS8880E MegaRAID SAS8880E The RAID controller can be used only for 512MB Cache with ECC 512MB Cache with ECC the connection of external subsystems RAID 0, 1, 10, 5, 50, 6 & 60 RAID 0, 1, 10, 5, 50, 6 & 60 (FibreCAT SX40, Eternus JX40) without ibbu with ibbu SAS 3Gb/sec SAS 3Gb/sec 8 port external 8 port external PCIe x4, 167mm PCIe x4, 167mm low profile bracket low profile bracket max. 2x per system max. 2x per system S26361-F3593-E1 for loose delivery please order 8 port SAS RAID Controller S26361-F3293-L501 LSI MegaRAID SAS9280-8e 6Gb/s 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 without ibbu The RAID controller can be used only for the connection of SAS 6Gb/sec external subsystems 8 port external (Eternus JX40 released, FibreCAT SX40 planned) PCIe x4, 167mm full height bracket max. 2x per system S26361-F3257-E116 Cache Battery Backup Unit max. 2x per system for loose delivery please order S26361-F3890-L12 P Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 17

14 P PRIMERGY RX600 S4 Status Section IX Fibre Channel Qlogic Emulex S26361-F3483-E1 S26361-F3483-E2 4GBit/s FC Controller 4GBit/s FC Controller Qlogic Qlogic QLE2460, full height bracket QLE2462, full height bracket 1 channel 4GBit/sec FC Controller 2 channel 4GBit/sec FC Controller LC Interface for 50µm Fiber LC Interface for 50µm Fiber PCIe x4, 170mm PCIe x4, 170mm max. 6x per system max. 6x per system No mix and match for Qlogic and Emulex Fibre channel controllers possible S26361-F3306-E1 S26361-F3306-E2 4GBit/s FC Controller 4GBit/s FC Controller 6x Emulex Emulex LPe1150, full height bracket LPe11002, full height bracket 1 channel 4GBit/sec FC Controller 2 channel 4GBit/sec FC Controller LC Interface for 50µm Fiber LC Interface for 50µm Fiber PCIe x4, 170mm PCIe x4, 170mm max. 6x per system max. 6x per system S26361-F3961-E1 S26361-F3961-E2 8GBit/s FC Controller 8GBit/s FC Controller Emulex Emulex LPe1250, full height bracket LPe12002, full height bracket 1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller LC Interface for 50µm Fiber LC Interface for 50µm Fiber PCIe x4, 170mm PCIe x4, 170mm max. 6x per system max. 6x per system All controllers for the connection of external storage systems are delivered without cables. For the configuration of external cabling see the configurator for external storage systems. For Fibre Channel SAN also other componets like switches, SFPs and optical wires are orderable (for details see price liste) Q Fujitsu Technology Solutions PRIMERGY Server 14 of 17

15 I PRIMERGY RX600 S4 Status Section X Communication / Network on-board LAN Controller 2x Dual Gbit Ethernet Contr. on-board Intel EB (ESB2 / Gilgal) Intel EB (Zoar) Teaming: Failover, Load Balancing The Intel LAN Controllers Pro 1000MT, 1000MF, 1000PT, 1000PF can be used with the on-board controller in Teaming Mode Two onboard LAN ports can likewise educate a team. ext: 4x RJ45 connector, Cat 5 A) Single Port LAN Adapter PCIe S26361-F3241-E1 (Glyndon) Gigabit Ethernet Contr. 1000TX Eth Ctrl 1x1Gbit PCIe Pro/1000PT Cu Intel PRO/1000 PT Server Adaptor PCIe x1 ext: for RJ45-connector, Cat 5 max. 4x per system S26361-F3242-E1 (Sheepshead Bay) Gigabit Ethernet Contr. 1000SX Eth Ctrl 1x1Gbit PCIe Pro/1000PF LC Intel PRO/1000 PF Server Adapter PCIe x4 ext:lc-connector max. 4x per system B) Dual Port LAN Adapter PCIe x4/x8 S26361-F3228-E1 S26361-F3505-E1 Gigabit Ethernet Controller Dual 1000TX 10 Gigabit Ethernet Controller dual port LC Eth Ctrl 2x1Gbit PCIe PRO/1000PT Cu Eth Ctrl 2x10Gbit PCIe x8 XF SR LC Intel Pro/1000PT dual Server Adapter Intel 10 Gigabit XF SR Dual Port Server Ad. 4x PCIe x4 PCIe x8 ext: for RJ45-plug, Cat 5 ext:lc-connector max. 4x per system max. 2x per system B) Quad Port LAN Adapter PCIe x4 S26361-F3462-E1 Gigabit Ethernet Controller Quad 1000TX Eth Ctrl 4x1Gbit PCI-X PRO/1000PT Cu Intel Pro/1000PT Quad Port Server Ad. PCIe x4 ext: for RJ45-plug, Cat 5 max. 3x per system Intel Pro/1000PT Quad Port is limited to max. 3 per system due to relations with other PCIe controllers. In selected configurations, more than 3x Intel Pro/1000PT Quad Port controllers can be supported by special release on request. J Fujitsu Technology Solutions x86 PRIMERGY Server 15 of 17

16 J PRIMERGY RX600 S4 Status Section XI System Management Products (RemoteView) S26361-F1790-E241 irmc S2 advanced pack integrated remote management controller activation key for graphical console redirection and remote media redirection Section XII National accessories packs System will be shipped with two power cords ICE320 C14->C13 for rack installation. Country specific power cords are not required. End PRIMERGY RX600 S4 Fujitsu Technology Solutions x86 PRIMERGY Server 16 of 17

17 PRIMERGY RX600 S4 Status Change Report Date Order number Changes S26361-F3208-E536 SAS HD 36GB - no longer available S26361-F3208-E173 SAS HD 73GB - no longer available S26361-F3593-! insert 6GB SAS Controller S26361-F3268-E1 CD-RW / DVD ROM drive - no longer available S26361-F1790-E221 RemoteView Software V5.0 - no longer available S26361-F3963-E3 Tape drive LTO4HH Ultrium - now available S26361-F3257-E4 4 port SAS RAID Controller - now available S26361-F3263-E625 Memory 16GB - as soon as available S26361-F3225-E3 Tape drive DDS Gen6 - as soon as available S26361-F3487-E460 new Xeon MP X7460 CPU (Dunnington) - now available S26361-F3505-E1 10 Gigabit Ethernet Controller dual port LC - now available S26361-F3961-E2 2 channel 8GBit/sec FC Controller now available S26361-F3961-E1 1 channel 8GBit/sec FC Controller now available S26361-F3531-E1 Blu-ray Combo drive HH SATA Low Profile now available S26361-F3487-E430 /-E4new 74xx CPU s (Dunnington) S26361-F3890-E20 new 8 port SAS RAID Controller with ibbu - as soon as available S26361-F3890-E1 new 8 port SAS RAID Controller without ibbu - as soon as available S26361-F3271-E1 new SAS Controller 3Gb/s 8 port S26361-F3857-E1 RDX drive USB - as soon as available S26361-F3436-E4 No TPM - now available first draft Fujitsu Technology Solutions x86 PRIMERGY Server 17 of 17