Modular IP67 I/O System

Transcription

1 Modular IP I/O System

2

3 Where previously discrete wiring was once required, fieldbuses now provide communication between control unit, system and machine. Depending on equipment type, cabinet-free automation systems help minimize costs for planning, start-up, and servicing. To continue leading the way, WAGO has accelerated its modular SPEEDWAY I/O-SYSTEM, boosting the performance of IP-rated components. Modular IP I/O System In addition to requiring a high degree of protection, a robust deisgn and standardized connection technology, there is an increasing demand for highly functional IP features that were once only reserved for IP0 systems, such as: High-Speed Data Exchange Programmable Parameterizable Diagnostic capable Updatable Typically, machines and systems must be tailored to suit individual requirements while meeting tight customer deadlines. Customer requirements can be incorporated easily and rapidly and then the system can be designed and installed. This makes modular IP systems ideal, as they are easily scalable and expandable. These systems allow machines to be first mounted in the factory, tested and then accepted by the customers. Then, they are dismantled, re-installed on customer s site and put into operation. WAGO SPEEDWAY offers all of these features.

4 00 System Features Modular Design Page Application-oriented signal acquisition/output High-Performance Data Transfer Page 8 Fast data exchange Programmable via CoDeSys Page 9 Integrated signal preprocessing Wide Variety of Parameterization Options Page 0 Fieldbus dependent/independent Servicing Convenience Page Update-capable, parameter-saving and flexible Fieldbus Independence Page Meets specific market/system requirements Asynchronous and Synchronous Diagnostics Page Fast and precise error analysis

5 - C Efficient Power Supply Solution Page Convenient module supply +0 C Temperature Range of C to +0 C Page Ideal for extreme environments Excellent Protection Page 8 EMC, water and dust protection Screw and DIN-Rail Mount Options Page 0 Flexible module assembly Ergonomic Design Page User-friendly modules design Topology Example Page ETHERNET system incl. accessories Modules Overview Page SPEEDWAY components

6 Modular Design Application-Oriented Signal Acquisition/Output Up to: I/O modules per station 8 channels per module 0 channels per station ft/0m between two modules,0ft/00m total extension per station Fieldbus USB interface Fieldbus coupler Spacer module Power supply Power supply I/O module

7 WAGO SPEEDWAY is a modular IP I/O system. SPEEDWAY connects to a fieldbus and on to higher-level control systems via a (programmable) fieldbus coupler. The fieldbus coupler features digital inputs. An integrated system bus interface allows connection to other I/O modules (e.g., analog, digital). This permits signals to be received and transmitted directly in the field. When used in areas of high signal concentration, the modules can be installed in an extremely compact manner. The I/O modules are connected to each other via data line (system bus) and supply line, allowing multiple power supplies to be used (e.g., when higher power demand is required or greater distances must be bridged). Depending on the fieldbus type, configuration, programming, servicing and diagnostics can be performed via integrated USB port and fieldbus interface. System bus Power supply Power divider

8 High-Performance Data Transfer Fast Data Exchange Up to digital signals, approx. 00µs Up to digital signals + analog signals, approx. 00µs Up to digital signals + 8 analog signals, approx. 00µs Increasing degrees of system automation and the trend toward fast ETHERNET-based controllers or fieldbus protocols call for a high communication bandwidth. Large data volumes are forwarded in short cycles for signal acquisition and transmission within the I/O system WAGO SPEEDWAY is designed for this purpose, also offering high synchrony, low jitter/skew and low latency for optimal control of dynamic system processes Cycle time [µsec] Digital Analog Number of signals

9 Programmable via CoDeSys Integrated Signal Preprocessing Object-oriented programming to IEC - One application easily manages different control systems Direct cross-communication between control systems Automation configurations are continuously decentralized and modularized. The WAGO SPEEDWAY PLCs (programmable to IEC -) were engineered to these standards. These programmable units optimize the system s dynamic response. By preprocessing signals on site, the signal volume for the higher-level controller is minimized. This enables devices to maintain autonomous operation, as well as independent start-up and operation. Moreover, decentralized intelligence can ensure that device downtime does not lead to a loss of the entire process -- system availability is retained. 9

10 Wide Variety of Parameterization Options Fieldbus Dependent/Independent Extraordinarily high degree of module parameterization Fieldbus-independent parameterization via GSD, GSDML and EDS files Fieldbus-independent, advanced parameterization via FDT/DTM technology Online diagnostics and simulation All SPEEDWAY components can be extensively parameterized. This allows the user to cover a wide range of functions with only a few base modules, as well as flexible system adaptations. Except for only a few modules, parameter setting is performed channel-by-channel. This greatly reduces the number of modules and versions required, minimizing supply and inventory costs. Depending on the fieldbus used, parameter setting is performed via device description files (e.g., GSD, GSDML, EDS). DTM device drivers based on FDT technology are also provided. These files can be loaded via FDT frame application and allow parameterization of systems having no device description files, as well as extended parameter setting. Access is performed either via USB interface or fieldbus (e.g., ETHERNET). Examples: Digital Input Module: filter, inversion, simulation, diagnostics Digital Output Module: inversion, substitute value strategy, manual mode, simulation, diagnostics Digital Input/Output Module: operating mode, filter, inversion, substitute value strategy, manual mode, simulation, diagnostics Analog Input Module U/I: voltage/ current measuring range, threshold values, filter, simulation, diagnostics Analog Input Module RTD: RTD measuring range, connection type, threshold values, integration time, linearization, simulation, diagnostics Analog Input Module TC: Thermocouple measuring range, threshold values, integration time, linearization, simulation, diagnostics Analog Output Module U/I: voltage/ current measuring range, substitute value strategy, manual mode, simulation, diagnostics 0

11 Easy to Service Updatable, Parameter-Saving and Flexible Updatable System parameter handling Options handling for Updatable Acquisition and operating costs of a system are steadily increasing. This is why your return on investment is now more important than ever. The SPEEDWAY System is updatable, providing a valuable contribution to cost optimization. Both coupler and I/O module firmware can be easily updated. This allows quick access to new functionalities, while errors can be fixed without replacing components. System parameter handling All parameterizable SPEEDWAY modules feature factory default settings. The modules can be customized to suit-specific systems requirements. SPEEDWAY provides the freedom of system parameter handling -- not every control system permits direct data parameterization, administration and archiving. This way, parameter settings won t be lost in case of a module exchange. System parameter handling provides archiving of all settings and checks (e.g., when exchanging an I/O module) if the right replacement module is used. In the event of a failure, parameter data can be restored quickly and reliably. Optionally, current hardware, software and firmware versions can be checked. Options handling Operation-related, variable I/O station configurations of a system (e.g., tool replacement in processing center) can often only be customized with extensive engineering before a changed production process can start. With PROFIBUS, SPEEDWAY supports variable system configuration without engineering modification. Supporting this, the higher-level control system defines various expansion stages within a maximum engineering configuration. This allows the control system to identify a SPEEDWAY station modification (number and type of modules) and run a sub-program without engineering modification.

12 Fieldbus Independence Meeting Specific Market/System Requirements MODBUS/TCP In order to fulfill specific market and system requirements, SPEED- WAY supports the fieldbuses shown. For addressing hardware and setting model-specific operation modes, the fieldbus coupler features a display panel. A protective cover safeguards contents from environmental influences and unintended contact. An USB interface (COM) provides direct system access for programming, parameter-setting and servicing.

13 LED and software supported Module-by-module and channel-by-channel Parameterizable Asynchronous and Synchronous Diagnostics Fast and Precise Error Analysis One of the greatest challenges for manufacturers of automation devices is making and keeping the engineering manageable. This is especially important for troubleshooting. For the IP systems, the diagnostic capability is especially significant due to the widespread distribution of a system. Thus, all WAGO SPEEDWAY devices deliver diagnostic data. A distinction should always be made between module- and channel-specific error messages. The quantity and type of diagnostic information is increasingly being determined by intelligent modules -- this facilitates in-depth error analysis. However, this also inevitably leads to an increase in diagnostic data. The transfer of this data must occur with virtually no delay and without influencing the cycle time. Asynchronous and synchronous transfer mechanisms are therefore supported to meet these challenges, minimizing downtime. Example: LED diagnostics of analog input module SB LED: Module status indication during communication (e.g., operation state, error) F LED: Indication of channel-wide errors (e.g., short circuit of sensor supply) Ch/Er LED: Channel-related status indication (e.g., operation state) and error (e.g., measuring range underflow or overflow, overload) Power LED: Logic, sensor and actuator supply indication

14 Efficient Power Supply Solution Convenient Module Supply M supply connections 8 AWG/0.mm² cable cross-section -%...+0% voltage fluctuation range Individual and group power supply Separate actuator supply up to 8A Electrically isolated power supplies Power loss diagram 0.mm, A 0.mm, A 0.0mm, A mm, A Voltage drop (V) SPEEDWAY (- %) Industry standard (- %) Cable length (m)

15 Select SPEEDWAY Modules are equipped with M connections for supplying energy to modules over great distances. Compared with M8 connections, they offer a connection cross-section of 8 AWG/0.mm² instead of AWG /0.mm². The related lower line resistance causes a lower voltage drop on the line. In connection with the larger voltage fluctuation range integrated in the modules, greater distances can be bridged between power supply unit and SPEEDWAY. A second supply connection allows for supply groups, or an additional supply for higher power requirements when using A output modules. Electrical separations in the modules power supplies guarantee smooth operation of the system in the event of an error (e.g., short circuit of the actuators). Inspection and diagnosis of the supply is performed along the entire cable run. An M connection contains two lines (logic and sensor supply, as well as actuator supply).

16 Temperature Range of - C to +0 C Ideal for Extreme Environments - C +0 C Even in sub-zero temperatures, WAGO SPEEDWAY will perform reliably. Despite the temperature, additional signal jumpering via passive distributors and sensor/actuator boxes in connection with active IP0 I/O systems is unnecessary. Harsh environmental conditions can be met and additional applications realized. This reduces costs associated with additional materials, assembly and operation. +0

17 - C - - C +0 C C

18 Excellent Protection EMC, Water and Dust Protection 8

19 IP degree of protection, fully encapsulated Inner-metallized housings Integrated shield plates Uncompromising protection, even in the harshest environments All modules offer IP-grade protection and robust construction. Fully encapsulated modules safeguard system operation, even when subjected to temperature extremes and prolonged periods of vibration. The electronic circuit is thus protected long-term. Protection both inside and outside Electromagnetic compatibility the ability of an electrical component to operate in its intended environment without causing or being influenced by electromagnetic interference is a central feature of the WAGO SPEEDWAY system. Electromagnetic shielding made of both metallized housing and shield plate guarantees trouble-free operation within the housing. The interferences are deflected directly on the machine via the mounting rail of the modules or system. The resulting SPEEDWAY Modules keep with WAGO s philosophy of exceeding standard requirements. 9

20 0

21 Carrier rail adapter Profile adapter CNOMO standard compliance Screw and DIN-Rail Mount Options Flexible Module Assembly The modules can be directly screwed onto the machine. Extensive engineering ensures compliance with standardized specifications from the CNOMO guidelines. Because passive distribution boxes and sensor/actuator boxes are also accounted for, WAGO SPEEDWAY eases the transition from passive to active automation and supports the development of mixed systems through standardized assembly dimensions. DIN and CNOMO adaptors for SPEEDWAY housing are available for flexible mounting options.

22 Ergonomic Design User-Friendly Module Design Clear arrangement of connectors, LEDs and marking areas Exclusive use of standard M8/M connectors Detailed text and symbol identification Marking strips or WMB markers for customer marking Optimum cable layout/led arrangement Clear serial number identification Compact design

23 WAGO SPEEDWAY does not require specialty cables and connectors. Standardized M8 ( poles) and M ( to poles) connections simplify both assembly and procurement. Connecting the fieldbus, system bus, power supply and sensors/actuators is performed via coded M connectors. This avoids errors in cable connection. In addition, the device connections are manufactured from metal. Compared to plastic versions, this prevents liquid intrusion that could occur from metal cable connectors being inadvertently cross threaded. Ergonomics played an important role in the development of WAGO SPEEDWAY. The result is a lightweight, compact design that can be used in the most compact areas of machines. Clearly visible printing, labeling and status LEDs provide quick access to module information.

24 Topology Example (ETHERNET System incl. Accessories) WAGO SPEEDWAY Control and Visualization Series PERSPECTO 0-9 ETHERNET RJ- Connector 8 Series Industrial Switch -0/..., ETHERNET Cable SPEED -0/... -0/... Servicing and Diagnostics IP0 Laptop -0/ USB Service Cable ETHERNET MS CS NS PS ACT/LNK I RES I B/E 0I R/S 9ISN 8I I I I I I I I 0 FB PFC 8DI SBM 8 0 V U LS U A -80 8DI 0 V U LS U A V U LS U COM Power Supply -0/... -0/ Power Supply OC OK /0 V 0-0 Hz A /,8 A Input ADJ. L N 8- DC V / 0 A Output /..., Power Supply Cable -90 PWR DVI V U LS U A 8- Power Supply / M Connector OC 8- /0 V 0-0 Hz A /,8 A Input L N OK ADJ. DC V / 0 A Output IP0-0/..., Power Supply Cable -0/... -0/..., Power Supply Cable

25 -0/..., ETHERNET Cable -0/..., System Bus Cable WAY -0/... -0/..., System Bus Cable -909/ System Terminating Plug -0 ETHERNET MS CS NS PS ACT/LNK I RES I B/E 0I R/S 9ISN 8I I I I I I I I 0 COM FB PFC 8DI SBM 8 0 V U LS U A DO 8 8DIO -80 8DIO DO 0 V U LS U A A 0 V U LS U A -80 V U LS U A -80-0/..., Power Supply Cable -0/... -0/..., Power Supply Cable -0/..., Power Supply Cable -0/..., System Bus Cable -0/... -0/... -0/..., System Bus Cable AI U/I Ch -0 Spacer AI RTD Ch -0 Spacer AO U/I Ch -0 Spacer 8DO A 8-909/ System Terminating Plug Ch Er Ch Er Ch Er Ch Er Ch Er Ch Er -0 Ch Er Ch Er Ch Er Er Er Er 0 V U LS U A V -0 U LS U A V -0 U LS U A V -0 U LS U A -80, Power Supply Cable -0/... -0/... IP

26 Modules Overview SPEEDWAY Components Identification Description Item No. Fieldbus Couplers (FC) FC PROFIBUS DP, 8 DI, VDC PROFIBUS-DP/V Coupler, incl. 8 digital inputs -0 FC PROFINET IO, 8 DI, VDC PROFINET IO Coupler, incl. 8 digital inputs -0 FC ETHERNET, 8 DI, VDC ETHERNET Coupler, incl. 8 digital inputs -0 FC Sercos, 8 DI, VDC Sercos Coupler, incl. 8 digital inputs - FC DeviceNet, 8 DI, VDC DeviceNet Coupler, incl. 8 digital inputs -0 FC CANopen, 8 DI, VDC CANopen Coupler, incl. 8 digital inputs -0 PLCs or Programmable Fieldbus Couplers (PFC) PFC ETHERNET, 8 DI, VDC Programmable ETHERNET Coupler, incl. 8 digital inputs -0 PFC CANopen, 8 DI, VDC Programmable CANopen Coupler, incl. 8 digital inputs -0 Digital Input Modules (DI) 8 DI, VDC (8 x M8) 8 digital inputs DI, VDC ( x M) 8 digital inputs DI, VDC (8 x M8) 8 digital inputs, low-side switching DI, VDC ( x M) 8 digital inputs, low-side switching DI, VDC (8 x M) 8 digital inputs -80 Digital Output Modules (DO).../ Interference-Free Version 8 DO, VDC, 0.A (8 x M8) 8 digital outputs, 0.A 8 DO, VDC, 0.A ( x M) 8 digital outputs, 0.A 8 DO, VDC,.0A (8 x M8) 8 digital outputs,.0a 8 DO, VDC,.0A ( x M) 8 digital outputs,.0a / / / /

27 Identification Description Item No. Digital Output Modules (DO).../ Interference-Free Version 8 DO, VDC, 0.A (8 x M8) 8 digital outputs, 0.A, low-side switching DO, VDC, 0.A ( x M) 8 digital outputs, 0.A, low-side switching DO, VDC, 0.A (8 x M) 8 digital outputs, 0.A Specialty Modules.../ Interference-Free Version Serial Interface RS-, RS-/ -8 ( x M) serial interfaces + digital inputs/outputs / DIO, VDC, 0.A (8 x M8) 8 digital inputs/outputs, 0.A 8 DIO, VDC, 0.A ( x M) 8 digital inputs/outputs, 0.A 8 DIO, VDC, 0.A (8 x M) 8 digital inputs/outputs, 0.A / / / DI, VDC, HS ( x ) 8 digital inputs, <0µs delay DO, VDC, HS ( x M) 8 digital outputs, 0.A, <µs delay -808 DIO, VDC, 0.A HS ( x M) digital inputs/outputs, 0.A, <0µs/<µs delay -0 Analog Input Modules (AI) AI U/I AI RTD AI TC analog inputs, voltage/current (0-0mA, 0-mA, -0mA, ±0mA, 0-0V, ±0V) analog inputs, RTD (Pt00/00/00/000, Ni00/0/000 Resistance: kω/kω, Potentiometer adjustment: 0-00%) analog inputs, thermocouple (type: B/C/E/J/K/N/R/S/T, voltage: ±/±/±/±90mV) Analog Output Modules (AO) AO U/I Supply Modules analog outputs, voltage/current (0-0mA, -0mA, ±0mA, 0-0V, ±0V) -0 Power Divider ( x M + x M) Power divider -90

28 WAGO Service Worldwide Germany WAGO Kontakttechnik Minden Tel. ++9//88/0 Fax ++9//88/9 Austria WAGO Kontakttechnik Wien Tel. ++///0/80 Fax ++///0/ Belgium WAGO Kontakttechnik Zaventem Tel. ++////90/90 Fax ++////90/99 China WAGO ELECTRONIC Co. Ltd. Tianjin Tel ++8//988 Fax ++8//98 England WAGO, Ltd. Rugby Tel. ++/88/8008 Fax ++/88/800 France WAGO CONTACT S.A. Paris Tel. ++/890 Fax ++/ / Printed in the United States Italy WAGO ELETTRONICA SRL Casalecchio di Reno (BO) Tel. ++9/0/ Fax ++9/0/ Japan WAGO Co. of JAPAN Ltd. Tokyo Tel. ++8///00 Fax ++8///0 Poland WAGO ELWAG sp. z o. o. Wroclaw Tel. ++8//00/8 Fax ++8//099 Singapore WAGO Electronic Pte. Ltd. Singapore Tel. ++/8 Fax ++/8 Switzerland WAGO CONTACT SA Domdidier Tel. ++////8 Fax ++////0 Mexico WAGO Corporation Queretaro Tel. 00/800/09/9 + ///9 Fax + ///0 WAGO Corporation N0 W99 Freistadt Road Germantown, Wisconsin / DIN Rail (-) Fax / - info.us@wago.com Canada WAGO Corporation Tel. 800/DIN Rail (-) Fax /-