Release Note TP-590TXR, TP-590RXR. TP-590TXR Any Yes N/A TP-590RXR Any Yes N/A

Transcription

1 Current Version: Ver.Type Ver No. Date Firmware R _ January 2018 Software Web Hardware RN Date: July 2017 Reference: Kramer Product Affected: Product Name Minimum FW Version for Upgrade Recommended for All Units TP-590TXR Any Yes N/A TP-590RXR Any Yes N/A Only if Added Features are Required Technical Notes: Fixed various bugs. Codependency with Other Products and Software: There is no codependency with other products or software.

2 Current Version: Ver.Type Ver No. Date Firmware R _ January 2018 Software Web Hardware RN Date: January 2017 Reference: The following changes were made in this version: Bugs Fixed: Fixed Bug Description Video appearance delay when both units are powered up together. 8996, 8997 Error message during chipset FW burning Occasional non-synched HDCP STATUS on extender units Sometimes no EDID update upon switching from monitor to monitor. 9061, 10281, Fixed various interop issues Rx power consumption too high when 4 USBs connected to specific USB devices Occasional loss of Ethernet communication. 9060, 10279, 10238, 10226, Fixed various audio switching issues 10282, Fixed various web-ui issues , 10219, 10285, 10672, 10733, Dipswitch Manual malfunction.

3 Bugs to Fix in Future Versions: Deferred Bug Description 5724 Rx analog out signal with specific NEC connected display disappears due to wrong copied EDID No audio and low resolution when connecting TP-580T and TP-590Rx with some specific Sony TV and LG Blu-ray No HDCP indication on Rx input VP-774 (HDBT out) wrongly reads EDID from TP-590RXR after power up Wrong Rx output status for TP-590Rxr following device reset Ethernet and camera connections failures following device power cycle Occasional loss of HDCP keys exchange, resolved via device re-switch Web-UI: multi-clicking on the EDID buttons causes many error messages Web-UI FW upgrade of same version causes an error message Web-UI: Missing "S" in "Second" on the 'video & Audio settings' , Web-UI: Wrong input EDID lock state upon DIP 3 change Tx USB speaker poor connection quality and noise Short embedded audio cut following device power-up. Known Limitations (including compatibility limitations): Limitation Description 5566 Rare failures on configuration saving attempts TP-590RXR: "NOT DEFINED" error message on web page when moving quickly from any page to the 'EDID Management' page During resolutions change, noise may be heard on analog audio port. When upgrading the Valens chipset, the upload may sometimes fail. To recover, cycle the power and try the upload again. Sometimes on the Web page the output is shown as disconnected while it is still connected. To recover, refresh the Web page. For some models of NEC displays/projectors there may be no audio. Workaround: edit the EDID as follows: 1. Change the revision number in the NEC EDID block from 1 to Add the specific vendor in NEC EDID Block 1. Preceding Version: F 1.0

4 Current Version: NP 1.0 History Version Date: February 2016 Reference: 7931 Release Type: Firmware Software Hardware New Product Kramer Product Affected: Product Name Minimum FW Version for Upgrade Recommended for All Units TP-590TXR N/A N/A N/A TP-590RXR N/A N/A N/A Only if Added Features are Required Technical Notes: This is a release note for new products. Codependency with Other Products and Software: There is no codependency with other products or software.

5 History Current Version: NP 1.0 Version Date: February 2016 Reference: 7931 This is a release note for new products. Known Issues: There may be problems saving the configuration. When upgrading the Valens chipset, the upload may sometimes fail. To recover, cycle the power and try the upload again. Sometimes on the Web page the output is shown as disconnected while it is still connected. To recover, refresh the Web page. For some models of NEC displays/projectors there may be no audio. Workaround: edit the EDID as follows: o Change the revision number in the NEC EDID block from 1 to 3. o Add the specific vendor in NEC EDID Block 1. Preceding Version: N/A