Standards and approvals

Transcription

1 2 - Siemens Industry Online Support 6 - UL database (alternative) SIVACON Switchboards and Busbar Trunking Systems 8 SIVACON 8MR System Air-Conditioning ALPHA Distribution Systems and Terminal Blocks 8 Molded-Plastic Distribution Systems 8 ALPHA FIX Terminal Blocks SENTRON Protection, Switching, Measuring and Monitoring Devices 10 Air Circuit Breakers 10 Molded Case Circuit Breakers 10 Miniature Circuit Breakers 11 Fuse Systems 12 Overvoltage Protection Devices 12 Switch Disconnectors 12 Switching Devices 13 Transformers, Power Supply Units and Socket Outlets 13 Busbar Systems 13 Measuring Devices and Power Monitoring Direct reference to the certificates in the Siemens Industry Online Support from the UL overview table. UL File Nr. Siemens UL overview 2015

2 - Siemens Industry Online Support - Siemens Industry Online Support Overview Certificates An overview, updated on a daily basis, of our products certified in accordance with CE, UL, CSA, FM, shipping authorizations etc. for products in the areas of low-voltage power distribution, electrical installation technology and industrial controls as well as additional technical documentation can be found on the Internet at In the Entry list you can filter the view in order to quickly find comprehensive information on the following subjects: Product or search term Date Type of certificate (general product approval, test certificates, shipping approval,...) Certificate (confirmations, UL, VDE,...) Approval office (TÜV, VDE, UL,...) Country 2 Siemens UL overview 2015

3 - Siemens Industry Online Support Approval requirements valid in different countries Siemens low-voltage switchgear and controlgear are designed, manufactured and tested according to the relevant German standards (DIN and VDE), IEC publications and European standards (EN) as well as CSA and UL standards. The standards assigned to the single devices are stated in the relevant parts of this catalog. In addition to the pertinent VDE, EN and IEC standards, the requirements of the various regulations valid in other countries have also been taken into account in the design of the equipment in some cases, in order that the devices can be deployed globally as far as possible. In some countries an approval is required for certain low-voltage switchgear and controlgear components. Depending on the market requirements, these devices have been submitted for approval to the authorized testing institutes. In some cases, CSA for Canada and UL for the USA only approve special versions. Such special versions are listed separately from the standard versions in the relevant parts of this catalog. For this equipment, there are sometimes limits with regard to the maximum permissible voltages, currents and rated outputs or special approvals and, in some cases, special identification may be required. For use on board ship, the specifications of the marine classification societies must also be observed. In some cases, they require type tests of the components to be approved. If you have any questions concerning UL/CSA approvals, contact Technical Support: Siemens UL overview

4 - Siemens Industry Online Support - Siemens Industry Online Support UL product standards (excerpt) The table below presents an excerpt of all the UL standards which are referred to on the following pages under "Type overview of approved devices". Note UL standards and IEC standards will be harmonized over the long term. UL Titel 50 Enclosures for Electrical Equipment, Non-Environmental Considerations LOW-VOLTAGE FUSES - PART 4: CLASS CC FUSES Low-Voltage Fuses - Part 13: Semiconductor Fuses 489 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures 489A Standard for Circuit Breakers for Use in Communications Equipment 498 Standard for Protectors for Coaxial Communications Circuits 506 Standard for Specialty Transformers 508 Standard for Industrial Control Equipment (wird zur Zeit abgelöst, es besteht noch eine Übergangsfrist) 512 Withdrawn, replaced by UL Standard for Time-Indicating and -Recording Appliances 873 Standard for Temperature-Indicating and -Regulating Equipment 917 Standard for Clock-Operated Switches 1012 Standard for Power Units Other Than Class Standard for Terminal Blocks 1077 Standard for Supplementary Protectors for Use in Electrical Equipment 1449 Standard for Surge Protective Devices 1561 Standard for Dry-Type General Purpose and Power Transformers Fuseholders - Part 1: General Requirements Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements A Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches Low-Voltage Switchgear and Controlgear - Part 1: General Rules A Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters Low-Voltage Switchgear and Controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices 4 Siemens UL overview 2015

5 CSA product standards (excerpt) The table below presents an excerpt of all the CSA standards which are referred to on the following pages under "Type overview of approved devices". - Siemens Industry Online Support CSA C22.2 Titel No. 5 / No Moulded Case Circuit Breakers, Moulded Case Switches and Circuit Breaker Enclosures (CSA C22.2 No wird ersetzt durch CSA C22.2 NO. 5-13) No Molded-case circuit breakers, molded-case switches and circuit-breaker enclosures No. 6 Principles and practices of electrical coordination between pipelines and electric supply lines No. 8 Electromagnetic interference (EMI) filters No. 14 / No. 14-M95 Industrial control equipment No. 39 /No. 39-M Fuseholder assemblies No. 55 Special Use Switches No. 66 Specialty Transformers No. 72 Heater elements No. 106 HRC-Miscellaneous Fuses No General Use Power Supplies No. 158/No Terminal blocks (CSA C22.2 No wrid ersetzt durch CSA C22.2 No ) No. 177 Clock-operated switches No M Special Use Attachment Plugs, Receptacles and Connectors No / Supplementary Protectors (No ist ersetzt durch CSA-C ) No Low-Voltage Fuses - Part 4: Class CC Fuses No Low-Voltage Fuses - Part 13: Semiconductor Fuses No Fuseholders - Part 1: General Requirements No Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Siemens UL overview

6 - UL database (alternative) - UL database (alternative) Overview Contact our Support to find out which products (please specify the article number) are approved according to which standard, see page 2. Alternatively you can obtain this information directly from the UL database with the help of the following approval tables. The latter contain a summary of the available products and details of the UL, CSA and IEC standards with which they comply. However, these tables contain only product groups. The product groups mentioned might include individual products which are not approved according to UL or CSA. It is essential therefore to research each individual product via our Support or the UL database. At you can view the certificate by entering the E number under "UL File Number" (e.g. E116386). The corresponding CSA certificate can be viewed by entering the manufacturer and the "CSA Class Number" at The respective Siemens reports can be downloaded from 6 Siemens UL overview 2015

7 Type overview of approved devices SIVACON Switchbords and Busbar Trunking Systems Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN UL listed CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter SIVACON 8MR System Air-Conditioning Filter fans 8MR64.. 8MR65.. UL NITW2 NITW8 Heater units 8MR UL KSOT2 KSOT8 Fan heaters Thermostats, hygrostats, hygrotherms, switching modules 8MR , 8MR , 8MR , 8MR , 8MR MR2170-4F, 8MR2170-4E 8MR2170-2BA, 8MR2170-1CA, 8MR2170-1DA, 8MR2170-2BB, 8MR2170-1CB, 8MR2170-1DB 8MR2170-1C 8MR2171-1BA, 8MR2171-2BA, 8MR2171-1BB, 8MR2171-2BB, 8MR2171-3BB, 8MR2172-1A, 8MR2172-2A, 8MR2172-1AB UL KSOT2 KSOT8 UL XAPX2 XAPX8 UL XAPX2 XAPX8 UL A UL A -- XAPX2 XAPX8 -- XAPX2 XAPX8 E CSA-C22.2 No E C22.2 No E CSA-C22.2 No E CSA-C22.2 No E CSA-C22.2 No E CSA-EN : EN E CSA-EN : EN Siemens UL overview

8 ALPHA Distribution Systems and Terminal Blocks Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN UL listed CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter Molded-Plastic Distribution Systems ALPHA 8HP molded-plastic distribution systems Enclosure base parts 8HP UL 50 BGUZ -- E IEC HP1104, 8HP1107 Transparent covers 8HP UL 50 BGUZ -- E IEC HP1224, 8HP1227, 8HP1232, 8HP1247 Non-transparent cover 8HP UL 50 BGUZ -- E IEC HP1204, 8HP1212 Intermediate frames 8HP1283, 8HP1284 UL 50 BGUZ -- E IEC Sealing frames 8HP1541, 8HP1542 UL 50 BGUZ -- E IEC End cover plates 8HP1500 UL 50 BGUZ -- E IEC ALPHA FIX Terminal Blocks 8WH6 ipo plug-in terminals 8WH6 through-type terminals 8WH WH WH6 isolating blade terminals 8WH WH6 isolating terminals 8WH6 two-tier terminals 8WH WH WH WH WH ipo installation terminals 8WH through-type screw terminals 8WH WH2 spring-loaded terminals 8WH through-type terminals 8WH WH WH WH fuse terminals 8WH WH isolating blade terminals 8WH WH isolating terminals 8WH WH two-tier terminals 8WH WH WH WH four-tier motor terminals 8WH2040-4L... 8WH diode terminals 8WH WH two-tier diode terminals 8WH E E E E Siemens UL overview 2015

9 Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN UL listed CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter 8WH5 combination plug-in terminals 8WH5 through-type terminals 8WH5 hybrid through-type terminals with ipo connection 8WH3 insulation displacement terminals 8WH through-type terminals 8WH WH WH5100-2PF00 8WH5100-3PF07 8WH WH WH WH WH two-tier terminals 8WH WH1 screw terminals 8WH through-type terminals 8WH WH fuse terminals 8WH WH WH isolating blade terminals 8WH1000-6CG00 8WH isolating terminals 8WH1000-6AG00 8WH two-tier terminals 8WH WH diode terminals 8WH G.. 8WH two-tier diode terminals 8WH WH high-current terminals 8WH1000-0A... 8WA1 screw terminals 8WA through-type terminals 8WA through-type terminals 8WA through-type terminals 8WA1011-0D... 8WA1011-1BH23 8WA WA WA1011-1B... 8WA1011-1D... 8WA1011-3D... 8WA1011-1BH.. 8WA1011-1P... 8WA WA1011-3D... 8WA1011-1BH.. E E No. 158 No. 158 No. 158 No. 158 No _0_ No _0_ No _0_ WA through-type terminals 8WA1011-1P... No _0_ WA through-type terminals 8WA1010-1P... No _0_ WA2 spring-loaded terminals 8WA initiator/actuator terminals 8WH No. 158 Siemens UL overview

10 SENTRON protection, switching, measuring and monitoring devices Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter UL listed Air Circuit Breakers Up to 5000 A (ACB) 3WL5 UL 489 DIVQ -- E IEC Molded Case Circuit Breakers Up to 1600 A -- Circuit breakers (CB) 3VL1...3VL8 UL 489 DIVQ -- E10848 C22.2 No IEC Motor circuit protectors (MCP) Molded case switches (MCS) 3VL2... 3VL7 UL DKPU2 E10848 C22.2 No IEC , IEC VL1...3VL8 UL 489 WJAZ -- E68312 C22.2 No IEC Circuit breakers (accessories) 3VL9... UL 489 DIHS/7 DIHS2 DIHS8 Miniature Circuit Breakers 5SY and 5SP miniature circuit breakers according to UL 1077 Additional components auxiliary switches Additional components fault signal contacts E69455 C22.2 No IEC , IEC VL9... UL 489 DHWZ -- E63311 C22.2 No IEC , IEC SY6 UL QVNU2 QVNU8 5SY4 UL QVNU2 QVNU8 5SP4, high-current UL QVNU2 QVNU8 5SY7 UL QVNU2 QVNU8 5SY8 UL QVNU2 QVNU8 5ST301.. UL QVNU2 QVNU8 5ST302.. UL QVNU2 QVNU8 Busbars 5ST37..-.HG UL NMTR NMTR7 Busbars distribution blocks 5ST2504,..05,..07 UL 1059 UL 486E Miniature circuit breakers according to UL 489 Auxiliary switches (AS) 5T301.-0HG UL 489 DIHS DIHS7 -- XCFR2 E C22.2 No E C22.2 No E C22.2 No E C22.2 No E C22.2 No E C22.2 No E C22.2 No E C22.2 No. 14 No IEC IEC IEC IEC IEC IEC IEC IEC IEC ST2508,..11 UL 486E -- XCFR2 E IEC SJ4...-.HG4. UL 489 DIVQ/7 -- E C IEC No UL 489A DIVQ -- E IEC E C IEC No Fault signal contacts (FC) 5T302.-0HG UL 489 DIHS DIHS7 Shunt trips (ST) 5T303.-0HG UL 489 DIHS DIHS7 -- E C22.2 No E C22.2 No IEC IEC Busbars and feeder terminals 5ST366.-.HG UL 489 DIHS2 -- E Siemens UL overview 2015

11 Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter UL listed Fuse Systems Cylindrical fuse systems Cylindrical fuse holders 3NW70.., 3NW72... UL IZLT2/8 E C IEC NW71 UL IZLT2 E C IEC Auxiliary switches 3NW UL 508 NKCR/7 -- E C IEC Fuse holders in size 10 x 38 mm and 3NW UL E C , Class CC 3NW HG Busbar system 5ST260. UL CSA C Terminals 5ST2600 UL E Busbar systems Busbars 5ST37..-.HG See under "Miniature circuit breakers" on previous page Class CC fuse systems Class CC fuse holders 3NW75.3-0HG UL IZLT/7 E C NW HG UL IZLT -- E C IEC Class CC fuse links 3NW1...-0HG, 3NW2...-0HG, 3NW3...-0HG 3NA, 3NH LV HRC fuse systems LV HRC fuse links 3NA6...-4, 3NA6...-4KK 3NA NA6..., 3NA NA7..., 3NA NA3..., 3NA NA3...-6,3NA6...-6, 3NA LV HRC fuse bases and accessories 3NH3, 3NH4230, 3NH7520, 3NX1, 3NX2,3NX3, SITOR semiconductor fuses LV HRC design Cylindrical fuse design, cylindrical fuse links Cylindrical fuse design, cylindrical fuse holders 3NE NE32../3NE32..-0B 3NE33../3NE33..-0B 3NE33..-8, 3NC33-1 3NE74..-0C, 3NE76..-0C/..-1C, 3NC3-6 3NE41..-5, 3NE NE1...-0, 3NE1-2 3NE80..-1, 3NE41.. 3NE7...-0C, 3NC NB33..-1KK2. 3NB...-4KK1. 3NC10..., 3NC NC NC109..., 3NC149. 3NC229. UL JDDZ -- E C22.2 No C22.2 No. 106 UL (only downstream from the branch protection) , _0_ IEC , IEC IZLT2 E C22.2 No IEC , (except 3NH3120) IEC UL JFHR2 E C22.2 No. 39-M UL JFHR2 E C22.2 No (except..-5) UL IZLT E C22.2 No IEC IEC IEC Siemens UL overview

12 Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter UL listed Overvoltage Protection Devices 5SD7 lightning arresters, type 1, type 2 and type 3 5SD SD SD SD SD SD7383-5, 5SD7483-6, 5SD7483-7, 5SD7488-2, 5SD UL VZCA2 VZCA8 E C22.2 No IEC Switch Disconnectors Switch disconnectors Main and EMERGENCY-STOP switches Manual motor controllers, contact units and flush-mounting switches 3LD2 UL 508 NLRV /7 -- E C22.2 No , IEC Molded-plastic enclosures 3LD LD2.66 UL 508 NLRV /7 -- E C22.2 No Molded-plastic enclosures, inch 3LD US2 UL 508 NLRV /7 -- E C22.2 No screw connections, special inscriptions 3LD US2 5TE1 switch disconnectors 5TE1 UL 508 NLRV -- E IEC KA switch disconnectors 3KA5230, 3KA5330, 3KA5530, 3KA5730, 3KA5830 UL 508 NLRV /7 -- E IEC Switch disconnectors with fuses 3KL switch disconnectors with fuses 3KL5230, 3KL5330, 3KL5730, 3KL6130-1AB02, 3KL6230-1AB02 Fuse switch disconnectors 3NP1 fuse switch disconnectors (Certified only as fuse holder) 3NP NP NP NP NP UL NLRV2 NLRV8 UL IZLT2 IZLT8 E IEC E C22.2 No IEC Accessories 3NP UL IYZZ2 E IEC Switching Devices 5TT5 Insta contactors 5TT Insta contactors, AC/DC technology 5TT59 UL 508 NLDX -- E IEC , IEC TT50 UL NLDX/7 E IEC , IEC LF timers Mechanical time switches 7LF53 UL , UL , UL WGZR2 E C22.2 No. 14 and IEC Siemens UL overview 2015

13 Devices Type UL CSA IEC LV 16 LV10 LV... Standard CCN CCN UL recognized UL File Nr. Standard CSA File Nr. CSA CLass Nr. Standard Chapter Chapter UL listed Transformers, Power Supply Units and Socket Outlets Socket outlets 5TE6 REG socket outlets 5TE6804 UL RTRT8 E C22.2 No M Busbar Systems 60 mm 8US busbar systems 8US1 UL508 NMTR/7 NMTR2/8 E C22.2 No. 14/No. 39 Busbar device adapters for 60 mm system Device holders for side mounting on busbars Side modules for widening busbar adapters Spacers for clearance on busbar adapters Vibration and shock kits for high vibration and shock loads IEC US UL508 NMTR/7 NMTR2/8 E C IEC No. 14/No. 39 8US1211-1NS10 UL508 NMTR/7 NMTR2/8 E C22.2 No. 14/No IEC US1250-5A.10 UL508 NMTR/7 NMTR2/8 E Is approved according to culus and curus IEC , IEC US1998-2BJ10 UL508 NMTR/7 -- E Is approved according to culus IEC IEC US1998-1BA10 UL508 NMTR/7 -- E Is approved according to culus IEC , IEC US1998-1CA10 UL508 NMTR/7 -- E Is approved according to culus IEC , IEC Connecting wedges 8US1998-1AA00 UL NMTR2/8 E Is approved according to curus IEC , IEC Measuring Devices and Power Monitoring Measuring devices Measuring devices 7KM PAC3100, 7KM PAC3200, 7KM PAC4200 7KM31, 7KM21, 7KM42 UL PICQ/7 -- E C22.2 No KM PAC expansion modules 7KM93 UL PICQ/7 -- E C22.2 No Other measuring devices Time and pulse counters 7KT58 UL XHNR2/8 E C22.2 No. 6 and 55 1) Is allowed to be used only as a fuse base according to UL IEC IEC IEC More information You can find more information about standards and approvals at If you have any questions concerning UL/CSA approvals, contact Technical Support: Siemens UL overview

14 s Industry Automation, Drive Technologies and Low-Voltage Power Distribution Further information can be obtained from our branch offices listed at Kapitelüberschrift (Variable H1) Interactive on DVD Products for Automation and Drives, Low-Voltage Power Distribution and Electrical Installation Technology Building Control GAMMA Building Control CA 01 ET G1 Drive Systems SINAMICS G130 Drive Converter Chassis Units D11 SINAMICS G150 Drive Converter Cabinet Units SINAMICS GM150, SINAMICS SM150 D12 Medium-Voltage Converters SINAMICS PERFECT HARMONY GH180 D 15.1 Medium-Voltage Air-Cooled Drives Germany Edition SINAMICS G180 D 18.1 Converters Compact Units, Cabinet Systems, Cabinet Units Air-Cooled and Liquid-Cooled SINAMICS S120 Chassis Format Units and D 21.3 Cabinet Modules SINAMICS S150 Converter Cabinet Units SINAMICS DCM DC Converter, Control Module D 23.1 SINAMICS DCM Cabinet D 23.2 SINAMICS Inverters for Single-Axis Drives and D31 SIMOTICS Motors SINAMICS G120P and SINAMICS G120P Cabinet D35 pump, fan, compressor converters Three-Phase Induction Motors SIMOTICS HV, D 84.1 SIMOTICS TN Series H-compact Series H-compact PLUS Three-Phase Induction Motors SIMOTICS HV, D 86.1 Series H-compact Synchronous Motors with Permanent-Magnet D 86.2 Technology, HT-direct DC Motors DA 12 SIMOREG DC MASTER 6RA70 Digital Chassis DA 21.1 Converters SIMOREG K 6RA22 Analog Chassis Converters DA 21.2 Digital: SIMOREG DC MASTER 6RM70 Digital DA 22 Converter Cabinet Units SIMOVERT PM Modular Converter Systems DA 45 SIEMOSYN Motors DA 48 MICROMASTER 420/430/440 Inverters DA 51.2 MICROMASTER 411/COMBIMASTER 411 DA 51.3 SIMODRIVE 611 universal and POSMO DA 65.4 Note: Additional catalogs on the SINAMICS drive system and SIMOTICS motors with SINUMERIK and SIMOTION can be found under Motion Control Low-Voltage Three-Phase-Motors SIMOTICS Low-Voltage Motors D81.1 SIMOTICS FD Flexible Duty Motors D81.8 LOHER Low-Voltage Motors D83.1 MOTOX Geared Motors D87.1 SIMOGEAR Geared Motors MD 50.1 SIMOGEAR Gearboxes with adapter MD Mechanical Driving Machines FLENDER Standard Couplings MD 10.1 FLENDER High Performance Couplings MD 10.2 FLENDER SIG Standard industrial gear units MD 30.1 FLENDER SIP Standard industrial planetary gear MD 31.1 units Process Instrumentation and Analytics Field Instruments for Process Automation FI 01 Digital: SIPART Controllers and Software MP 31 Products for Weighing Technology WT 10 Digital: Process Analytical Instruments PA 01 Digital: Process Analytics, PA 11 Components for the System Integration Low-Voltage Power Distribution and Electrical Installation Technology SENTRON SIVACON ALPHA LV 10 Protection, Switching, Measuring and Monitoring Devices, Switchboards and Distribution Systems Standards-Compliant Components for LV 11 Photovoltaic Plants Electrical Components for the Railway Industry LV 12 Digital: TÜV-certified Power Monitoring System LV 14 Components for Industrial Control Panels according LV 16 to UL Standards 3WT Air Circuit Breakers up to 4000 A LV 35 3VT Molded Case Circuit Breakers up to 1600 A LV 36 Digital: SIVACON System Cubicles, System Lighting LV 50 and System Air-Conditioning Digital: ALPHA Distribution Systems LV 51 ALPHA FIX Terminal Blocks LV 52 SIVACON S4 Power Distribution Boards LV 56 SIVACON 8PS Busbar Trunking Systems LV 70 Digital: DELTA Switches and Socket Outlets ET D1 Motion Control SINUMERIK 840D sl Type 1B NC 62 Equipment for Machine Tools SINUMERIK 808 NC 81.1 Equipment for Machine Tools SINUMERIK 828 NC 82 Equipment for Machine Tools SIMOTION, SINAMICS S120 & SIMOTICS PM 21 Equipment for Production Machines Drive and Control Components for Cranes CR 1 Power Supply SITOP Power supply KT 10.1 Safety Integrated Safety Technology for Factory Automation SI 10 SIMATIC HMI / PC-based Automation Human Machine Interface Systems/ PC-based Automation ST 80/ ST PC SIMATIC Ident Industrial Identification Systems ID 10 SIMATIC Industrial Automation Systems Products for Totally Integrated Automation ST 70 SIMATIC PCS 7 Process Control System ST PCS 7 System components SIMATIC PCS 7 Process Control System ST PCS 7 T Technology components Add-ons for the SIMATIC PCS 7 ST PCS 7 AO Process Control System SIMATIC NET Industrial Communication IK PI SIRIUS Industrial Controls SIRIUS Industrial Controls IC 10 Information and Download Center Digital versions of the catalogs are available on the Internet at:

15 Siemens AG Energy Management Low Voltage & Products Postfach REGENSBURG GERMANY Subject to change without prior notice PDF (E86060-K8280-E ) PI 0415 En Siemens AG 2015 The information provided in this catalog contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.