Network Integration Engine (NIEx9) for Third-Party Integrations Product Bulletin

Transcription

1 Network Integration Engine (NIEx9) for Third-Party Integrations Product Bulletin MS-NIE9xx-0, MS-NIE39xx-x, MS-NIE49xx-x, MS-NIE59xx-x, MS-NIE89xx-x Code No. LIT-093 Software Release 9.0 Issued December 07 Refer to the QuickLIT website for the most up-to-date version of this document. Important: NIEx9s are compatible with Metasys system Release 7.0 and later. You may apply the dual trunk integration feature to NIEx9s purchased prior to the current release by using the NIEx9 Driver Manager tool. For information on how to apply the latest package and license files that support dual trunks, refer to the NIEx9 Driver Manager Application Note (LIT-099). Network Integration Engines (NIEx9s) for third-party integrations enable IP connectivity and web-based access to Metasys Building Management Systems (BMSs). The NIE39/NIE49 models enable cost-effective NIEx9 connectivity and control in smaller facilities, and can extend NIEx9 supervisory functions in larger facilities. The NIE59 models support a comprehensive set of supervisory features and functions for large facilities and technically advanced buildings and complexes. The NIE89 is a high-capacity server model that integrates large networks into a Metasys network. The NIE89 supports either 0,000 or 5,000 objects. Figure : NIE59 Network Integration Engine NIEx9s leverage standard building management communication technologies, including BACnet protocol; LONWORKS protocol; N Bus protocol; Modbus, M-Bus (EN 434-3), and KN protocols; and third-party proprietary protocols to monitor and supervise a wide variety of HVAC, lighting, security, fire, electrical and thermal measuring, and access control equipment. For third-party integrations, one NIEx9 can support two Modbus integrations, two M-Bus integrations, or one integration of each. NIEx9s provide comprehensive equipment monitoring and control, scheduling, alarm and event management, energy management, data exchange, data trending, and data storage. NIEx9s feature an embedded Site Management Portal (SMP) UI, support multiple concurrent web browser sessions with password and permission access control, and provide the protection of industry-standard IT security. The NIE9 models enable compact and combined solutions including supervisory and control capacity. They can be used in smaller facilities where an all-in-one (supervisory, control, and integration) platform is required. Modbus Integrations use a Vendor Generator Express (VGE) tool that creates vendor Modbus definition (VMD) tables for specific third-party equipment. You can purchase tables from the System Integration Services North America (SIS-NA) or the SIS-Europe office, or you can create them with the VGE tool. The VGE tool requires certification and licensing for its use. To obtain a license, attend the training listed in Features and Benefits Communication Using Commonly Accepted IT Standards at the Automation and Enterprise Level Allows you to install a system on your existing IT infrastructure within a building or enterprise and use standard IT communication services over the company intranet, WAN, or public Internet with firewall protection. Web-Based User Interface Allows you to access system data in the NIEx9s from any supported web browsing device connected to the network, including remote users connected by dial-up telephone or an Internet service provider (ISP).

2 Support for Web Services at the Automation Network Level Allows you to develop facility-specific advanced data interfaces and applications. Embedded Site Management Portal System Configuration Software Provides you with password-protected access to system configuration, monitoring, commanding, diagnosis, and cloud-based applications from any device with web browser software without the need for separate workstation software. Supervision of Controller Networks Including BACnet MS/TP, BACnet IP, N Bus, LONWORKS, Modbus RTU, Modbus TCP, M-Bus (EN 434-3) serial and IP, KN IP, and third-party protocol devices Supports connectivity to open network standards for complete flexibility in the selection of field devices. Support for Dual Trunks Significantly improves the flexibility and extends the investment of integrations to third-party equipment. The dual trunk feature potentially reduces the number of NIEx9s required on a project and allows you to add integrations to existing NIEx9s that are at Release 7.0 and later. You can more easily adapt to the requirements of projects that have fewer devices that require integration but use separate networks and different protocols. NIEx9 Networking NIEx9s have multiple connection port options that allow you to build an extremely flexible network at the automation and enterprise level of your system, as well as at the field controller and data acquisition levels. IP Ethernet Network NIEx9s connect directly to IP Ethernet networks running at 0, 00, or,000 Mbps (depending on the model). Authorized users log in to the Site Director to access the entire Metasys system for the site. Data transmission on the network uses standard IT protocols, services, and formats. Networks in different buildings may be interconnected using standard WAN technologies and network service providers. The speed of transmission depends on the technology used. Remote Access to NIEs The NIEx9 can be accessed remotely over standard WAN infrastructures, over the Internet using an ISP line, or over the public telephone network using a modem and Point-to-Point Protocol (PPP). Most NIEx9 models support an external modem. Launcher Application The Launcher is a software application that you download when you browse to any Metasys server or supervisory engine on the building network. After you install the Launcher software, use it to launch the SMP UI. For details, refer to the Launcher Tool Help (LIT-074). ADS/AD The Application and Data Server/Extended Application and Data Server (ADS/AD) is an optional software package running on a computing platform that provides a location for storage of the system configuration database, trend logs, alarm logs, audit trails, and graphics. An ADS/AD configured as the Site Director allows more concurrent users and coordinates access to all components on a site connected over the network, Internet, or telephone line via dial-up communication. Refer to the Application and Data Server (ADS) and Extended Application and Data Server (AD) Product Bulletin (LIT-055) for more information. Field Networks and Protocols The NIEx9 communicates data from one field network to another and from the field network level to the enterprise and automation network level, enabling your system to operate as one virtual control network. Automation Level Communication NIEx9s communicate internal system data using peer-to-peer BACnet messaging over the IP Ethernet network. Each NIEx9 shares data and can access information on the other NAEx5s or NIEx9s connected on the network, which enables coordination and control of the entire BMS. BACnet Protocol The automation level communication also supports the BACnet protocol and facilitates the network integration of other systems and devices that use BACnet.

3 The NIEx9 supports the BACnet services and objects typically used by a workstation and a field controller device, including BACnet alarm, scheduling, trend, and event services. MS/TP FC Bus The BACnet Master-Slave/Token-Passing (MS/TP) Field Controller (FC) Bus is a standard peer-to-peer, multiple-master protocol in which each master device takes turns originating messages to pass to any device on the bus. Via the MS/TP FC Bus, NIEx9s can communicate with the Metasys Field Equipment Controller (FEC) family of controllers, including FEC6 and FEC6 field equipment controllers; Advanced Application Field Equipment Controllers (FACs); VMA6 and VMA83 Variable Air Volume controllers; and IOM7, IOM7, IOM37, and IOM47 input/output control modules. NIEx9s can also communicate over the FC Bus with TEC6xx Series thermostat controllers and third-party MS/TP devices that comply with the BACnet standard protocol based on ANSI/ASHRAE Standard N Bus The N Bus is an open Johnson Controls field communications trunk that links Application-Specific Controllers (ASCs) and programmable controllers to a supervisory controller. ASCs include Air Handling Units (AHUs), Unitary Controllers (UNTs), VAV controllers, and VAV Modular Assemblies (VMAs). Programmable controllers include the D900. The N Bus supports Metasys system compatible devices from other manufacturers and the Metasys Integrator system. LONWORKS Bus Specified NIEx9 models can supervise LONWORKS devices if the network interface follows current LONMARK guidelines and uses the Free Topology Transceiver (FTT0). The LONWORKS network interface in specified NIEx9 models supports all current LONMARK certified devices, including Johnson Controls devices such as: LN Series Controllers NexSys controller line LONWORKS enabled programmable Flexible System Controller (FSC). Modbus Modbus is one of the most common Master-Slave communication protocols used in the industry. It is openly published and royalty-free, making it relatively easy to deploy as an industrial network. Modbus transmits raw bits or words, placing few restrictions on vendors. NIEx9 supports both Modbus RTU (RS-485, RS-3) and Modbus TCP/IP connectivity. Depending on the protocol, a converter may be required to connect the NIEx9 to a Modbus network. M-Bus M-Bus (Meter Bus) is a European standard (EN 434-3) that applies to heat meters. Heat meters measure the heat absorbed or released by an energy-conveying liquid in a heat-exchange circuit. An M-Bus level converter, such as an RS3-to-M-Bus converter, is required to connect the NIEx9 to an M-Bus network. For connection to the Ethernet network, an M-Bus-to-IP level converter is required. KN Bus KN Bus is used to control lighting, blinds and shutters, heating, and attendance systems. KN (KONNE) was created from the EIB (European Installation Bus), BatiBUS, and EHS (European Home System) protocols. A KN IP Gateway is required to connect the NIEx9 to a KN network. Third-Party Protocols NIEx9 can supervise different networks that use other standards or proprietary protocols. The flexibility of the platform allows the integration of devices on both serial (RS-3, RS-485) and TCP/IP levels. Dual Trunk Support You can commission an NIEx9 to monitor and control two Modbus, two M-Bus, or one Modbus and one M-Bus protocol integrations. This capability reduces the number of required NIEx9 engines and provides greater flexibility when integrating different equipment. Table illustrates the different dual trunk combinations supported for each engine. Some integrations use a protocol converter as a required accessory. For details, see. 3

4 Table : Dual Trunk NIEx9 Options Trunk Type Dual Trunk Limits NIE9 NIE39 NIE49 NIE59 NIE89 Modbus RS3 RS485 TCP 4 TCP RS3 RS485 RS3 TCP RS485 TCP M-Bus RS3 RS485 TCP 4 TCP RS3 RS485 RS3 TCP RS485 TCP 4

5 Table : Dual Trunk NIEx9 Options Trunk Type Dual Trunk Limits NIE9 NIE39 NIE49 NIE59 NIE89 Modbus and M-Bus RS3 Modbus RS3 M-Bus RS485 Modbus RS485 M-Bus RS3 Modbus RS485 M-Bus RS485 Modbus RS3 M-Bus TCP Modbus RS3 M-Bus TCP Modbus RS485 M-Bus RS3 Modbus TCP M-Bus RS485 Modbus TCP M-Bus TCP Modbus TCP M-Bus 4 TCP Modbus 4 TCP M-Bus KN TCP 4 TCP 5

6 Figure : Metasys Network with Multiple NIEx9s Software for Efficient Building Operation NIEx9s ship with the latest version of the Metasys system software, which have the following features: Metasys Site Management Portal User Interface provides data and graphic screens to supported web browsers. Authorized users log in to the NIEx9 using the Launcher application to access the SMP UI. This embedded user interface is ideal for smaller networks and remote locations where a dedicated computer platform to support a user interface is not required. Remote Services Connection allows easy and secure communication between the Metasys system and cloud-based applications. To make this connection, the Metasys system requires minor programming and setup by Johnson Controls. When you are connected, you can access multiple cloud-based applications and features. To learn more, please visit the Building Management page located on the Johnson Controls website. Monitor and Control collects data from the field devices and then coordinates and sends the required commands to the controlled equipment at the required priority. Global Search allows you to search the Metasys system and manage lists of objects, which can be used by other features for commanding, trending, reporting, and object selection. Global Command allows you to send a single command to multiple objects and view a log of the command results. Transaction Recording audits and logs all user actions performed through the NIE. Alarm and Event Processing enables NIEx9s to send alarm and event messages to web browsers, pagers, servers, Network Management systems, and serial printers, as well as store and view alarm and event logs on the NIEx9 and transfer it to an ADS/AD. Historical Trend Data can be collected by NIEx9s for any monitored value at user-defined intervals, or trending can be based on change of value (COV). You can use trend logs to analyze building system performance and locate system problems. NIEx9 trend logs can be transferred to the ADS/AD at defined intervals or when the NIEx9 logs are full. Totalization Data allows you to monitor energy use (and other consumables) and generate cost reports to support utility cost reductions. It also provides data for service, maintenance, and early identification of building system problems. Trend Studies allows you to view multiple trend extensions in a single view to facilitate monitoring and troubleshooting your Metasys site. 6

7 Scheduling allows you to define occupancy periods and start and stop times for mechanical or electrical equipment. Operating parameters can be set according to time of day, day of the week, holiday, or for calendar dates. Network-Wide System Interlocking enables NIEx9s to collect field controller data, make logical comparisons, and issue relevant commands to other field controllers anywhere on the network. Optimal Start automatically determines the best time to start heating and cooling systems to ensure that the facility is ready for occupants. It adjusts to seasonal variations and reduces energy use. System Security enables an NIEx9 to recognize legitimate users with valid user IDs and passwords at the SMP UI. User access data is encrypted in the transmission and in the NIEx9 database. The system administrator manages user profiles, authorization levels, user ID, password, and specific NIEx9 data access privileges in each user account. Demand Limiting and Load Rolling (DLLR) monitors energy meters for electricity, gas, steam, or water, and automatically sheds equipment loads according to user-defined levels. Demand Limiting helps manage utility demand charges. Load Rolling controls equipment operating levels to reduce total energy consumption. Comfort overrides prioritize equipment shedding. Database Configuration Management allows you to define the Metasys system configuration and database offline for download to the NIE. All the required database configuration software resides on the NIEx9 or SCT. You do not need a copy of the database on your local client computer to make authorized changes. The NIE9 has 33 onboard I/O control points and a Sensor/Actuator (SA) Bus. The SA Bus allows you to connect Input/Output Modules (IOMs) and increase the I/O control points in your application. You can also connect NS Series network sensors and supported variable-frequency drives (VFDs) to the SA Bus, and integrate state-of-the-art temperature control and motor speed control into your NIE9 application. You define and configure the 33 I/O points on the NIE9 and the I/O points and devices on the NIE9 SA Bus in the Controller Configuration Tool (CCT) software. The NIE9 hardware platform also features the following: multiple processors for supervisory and direct digital control non-volatile solid-state flash memory to store all programs and data standard USB connection data protection battery to save data and power the real-time clock when primary power to the NIE9 is interrupted LEDs to indicate power, communications, and device condition to allow easy servicing removable, color-coded, screw terminal blocks for 4 VAC power, communications bus, and I/O point field wiring connections standard 9-pin sub-d connector for RS-3-C serial port RJ-45 8-pin modular connector for Ethernet connection integral display screen with navigation keypad (on specified models) Figure 3: NIE9 Network Integration Engine Hardware Features NIE9 The NIE9 features an integral FEC that provides direct interface to and control of remote field equipment, such as large central cooling and heating plants and large built-up AHUs. 7

8 NIE39, NIE49, and NIE59 Depending on the model, an NIE39, NIE49, and NIE59 have the following features for the building controls market: industrial single board computer (SBC) non-volatile solid-state flash memory to store all programs and data standard USB connections battery backup to save data from Dynamic Random Access Memory (DRAM) into flash memory when power to the NIE is interrupted real-time clock with battery backup LEDs to indicate power, communications, and fault, to allow easy servicing removable screw terminals for 4 VAC power and field network bus connections standard 9-pin sub-d connectors for RS-3-C serial ports RJ-45 connector for Ethernet connection Figure 4: NIE39/NIE49 Network Integration Engine The NIE89 has a scalable design and integrates large numbers of third-party devices into your Metasys network. The NIE89 supports virtual environments, including VMWare and Microsoft Hyper-V. Refer to Network and IT Guidance for the BAS Professional Technical Bulletin (LIT-079) for more information. The NIE89 features the following: support for up to four supervisory devices when configured as a Site Director a web-based user interface using HTTP web services for access to data and services at the automation network level routing of event and alarm notifications to an ADS or AD (ADS-Lite does not support the NIE89) the capability to send event and alarm notifications to pager and destinations directly data collection, trend sampling, and audit trail logging standard protocol clients: - Simple Network Management Protocol (SNMP) for network device management - Simple Network Time Protocol (SNTP) for time and date synchronization - Dynamic Host Configuration Protocol (DHCP) for dynamic IP address assignment - Simple Mail Transfer Protocol (SMTP) for sending notification of alarms and events The NIE89 does not support: Software Features NIE89 Note: The NIE89 is available as software only. BACnet MS/TP field controllers directly N Bus networks LONWORKS networks dial-out to an ADS/AD device Reset command in the Metasys Site Management Portal UI upgrade using the NAE/NIE Update Tool 8

9 NIEx9 Series Comparison Table contains a brief comparison of the features of the different NIEx9 Series engines. (Not all features are available on every model in a series.) Table : Comparison of Features for NIEx9 Models Features NIE9 NIE39 NIE49 NIE59 NIE89 Number of N or BACnet MS/TP Trunks N/A Number of Integration Ports (Modbus, M-Bus, KN) RS-3 Ethernet RS-3 RS-485 RS-3 RS-485 RS-3 RS-485 Ethernet Ethernet Ethernet Ethernet Maximum Number of N or BACnet MS/TP Devices per Trunk N/A Maximum Number of Integrations Supported 8 Maximum Number of Modbus Devices per Port per integration, not to exceed a total of,000 devices Maximum Number of M-Bus Devices per Port per integration, not to exceed a total of,000 devices Maximum Number of KN Bus Group Addresses,000,000,000,500,500 Maximum Number of KN IP Gateways per NIE Maximum Number of NIEs per KN IP Gateway (Interface Mode) Maximum Number of Objects,500,500,500 5,000 0,000 (base) or 5,000 (upgrade) Internal Modem None None None None None RS-3-C Serial Ports None USB Serial Ports Minimum of RS-485 Ports None Ethernet Ports LON Ports (LON Models Only) N/A LONWORKS Network Support (Number of Devices) N/A 9

10 Conclusion The NIEx9 affirms Johnson Controls as a leader in the BMS industry and as an innovator of solutions for the complete management of buildings. The integration of IT and internet standards into the NIEx9 platform, as well as the use of open protocols for field networks, bring the benefits of the global communications and control industries into one system. Web browser-based access from any location is a key to the effective use of the automation network. The Metasys system continues to be the integrating network within buildings and has now been extended to bridge the gap between traditional control systems and the business and communication network systems of the enterprise. The Metasys NIE and Metasys web-enabled network are investments that yield returns to the building owner and operator far into the future. Table 3: NIE9 Ordering Information Description Product Code Number MS-NIE9xx-x (base features on each NIE9) MS-NIE90-0 MS-NIE96-0 MS-NIE90-0 MS-NIE96-0 MS-NIE960-0 MS-NIE966-0 Each NIE9 Series model requires a 4 VAC power supply and includes one RS-3-C serial port, one USB serial port, one SA Bus port, one RS-485 or LON port, one Ethernet port, and an MS-BAT00-0 Data Protection Battery. Each NIE9 Series model supports 33 hard-wired Input/Output points. Up to two ports can be defined for third-party integration. The other ports have to be defined in order to use standard protocols (N, BACnet MS/TP, or LON). Supports BACnet IP network. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one N Bus. The number of supported devices on the third-party trunk depends on the protocol. For the N Bus, up to 3 devices are supported. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one N Bus. The number of supported devices on the third-party trunk depends on the protocol. For the N Bus, up to 3 devices are supported. Includes integral display screen. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ), and one LONWORKS trunk. The number of supported devices on the third-party trunk depends on the protocol. For the N Bus, up to 3 devices are supported. For the LONWORKS trunk, up to 3 devices are supported. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ), and one LONWORKS network trunk. The number of supported devices on the third-party trunk depends on the protocol. For the LONWORKS trunk, up to 3 devices are supported. Includes integral display screen. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one BACnet MS/TP (RS-485) trunk. The number of supported devices on the third-party trunk depends on the protocol. For the BACnet MS/TP trunk, up to 3 devices are supported. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one BACnet MS/TP (RS-485) trunk. The number of supported devices on the third-party trunk depends on the protocol. For the BACnet MS/TP trunk, up to 3 devices are supported. Includes integral display screen. For repair parts, add -700 after the code number (for example, MS-NIE90-700). Modbus RTU (RS-485) may require an RS-3/RS-485 converter. See Table 9. 3 M-Bus protocol requires the addition of an external level converter. M-Bus can also be used over either serial or IP. See Table 0. 4 KN protocol can only be used over IP and requires the addition of the KN IP gateway. See Table. 0

11 Table 4: NIE39 Ordering Information Description Product Code Number MS-NIE39xx-x (Base Features of Each NIE39) MS-NIE390- MS-NIE390- Each NIE39 Series model requires a 4 VAC power supply. Each model includes two RS-3-C serial ports, one USB serial port, one RS-485 or LON port, one Ethernet port, and an MS-BAT00-0 Data Protection Battery. Up to two ports can be defined for third-party integration. The other ports have to be defined in order to use standard protocols (N, BACnet MS/TP, or LON). Supports BACnet IP network. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one N Bus or one BACnet MS/TP (RS-485) trunk. The number of supported devices on the third-party trunk depends on the protocol. For the N Bus or BACnet MS/TP trunk, up to 50 devices are supported. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one LONWORKS trunk. The number of supported devices on the third-party trunk depends on the protocol. For the LONWORKS trunk, up to 64 devices are supported. For repair parts, add -70 after the code number (for example, MS-NIE390-70). Modbus RTU (RS-485) may require an RS-3/RS-485 converter. See Table 9. 3 M-Bus protocol requires the addition of an external level converter. M-Bus can also be used over either serial or IP. See Table 0. 4 KN protocol can only be used over IP and requires the addition of the KN IP gateway. See Table. Table 5: NIE49 Ordering Information Description Product Code Number MS-NIE49xx-x (Base features of each NIE49) MS-NIE490- MS-NIE490- Each NIE49 Series model requires a 4 VAC power supply. Each model includes two RS-3-C serial ports, one USB serial port, one RS-485 or LON port, one Ethernet port, and an MS-BAT00-0 Data Protection Battery. Up to two ports can be defined for third-party integration. The other ports have to be defined in order to use standard protocols (N, BACnet MS/TP, or LON). Supports BACnet IP network. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one N Bus or one BACnet MS/TP (RS-485) trunk. The number of supported devices on the third-party trunk depends on the protocol. For the N Bus or BACnet MS/TP trunk, up to 00 devices are supported. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and one LONWORKS trunk. The number of supported devices on the third-party trunk depends on the protocol. For the LONWORKS trunk, up to 7 devices are supported. For repair parts, add -70 after the code number (for example, MS-NIE490-70). Modbus RTU (RS-485) may require an RS-3/RS-485 converter. See Table 9. 3 M-Bus protocol requires the addition of an external level converter. M-Bus can also be used over either serial or IP. See Table 0. 4 KN protocol can only be used over IP and requires the addition of the KN IP gateway. See Table.

12 Table 6: NIE59-3 Ordering Information Description Product Code Number MS-NIE59xx-3 (Base Features of Each NIE59) MS-NIE MS-NIE590-3 Each NIE59-3 Series model requires a 4 VAC power supply. Each model includes two RS-3-C serial ports, two USB serial ports, two RS-485 ports, one Ethernet port, and one MS-BAT00-0 Data Protection Battery. Supports up to 00 devices on each N or BACnet MS/TP trunk and up to 00 devices on the integration trunk. Up to two ports can be defined for third-party integration. The other ports have to be defined in order to use standard protocols (N, BACnet MS/TP, or LON). Supports BACnet IP network. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ) and two N or BACnet MS/TP (RS-485) trunks. The number of supported devices depends on third-party protocol. For the N or BACnet MS/TP (RS-485) trunk, up to 00 devices are supported. Supports two third-party trunks (Modbus RTU or TCP, M-Bus 3, or KN 4 ), two N or BACnet MS/TP (RS-485) trunks, and one LONWORKS Network trunk. The number of supported devices depends on protocol. For each N or BACnet MS/TP (RS-485) trunk, up to 00 devices are supported. For the LONWORKS trunk, up to 55 devices are supported. For repair parts, add -70 after the code number (for example, MS-NIE ). Modbus RTU (RS-485) may require an RS-3/RS-485 converter. See Table 9. 3 M-Bus protocol requires the addition of an external level converter. M-Bus can also be used over either serial or IP. See Table 0. 4 KN protocol can only be used over IP and requires the addition of the KN IP gateway. See Table. Table 7: NIE89 Ordering Information Product Code Number Description MS-NIE89SW-0 MS-NIE89SW-6 MS-MODBUSN89-0 MS-MBUSN89-0 MS-KNN89-0 MS-5KUPG-0 New NIE89 software only; for new installations or projects Upgrade NIE89 software; for existing NIE89s Modbus driver for NIE89; supports up to 4 Modbus integrations. M-Bus driver for NIE89; supports up to 4 M-Bus integrations. KN driver for NIE89; supports up to 4 KN integrations. 5,000 object expansion upgrade for NIE89 (one expansion only per NIE89) Standard NIE89 models support 0,000 objects; an expansion upgrade is available to support an additional 5,000 objects. Must be ordered and licensed with the NIE89 in order to use this protocol. Table 8: NIEx9 Accessories Ordering Information Product Code Number Description MS-BAT00-0 MS-BAT00-0 Table 9: Modbus Accessories Ordering Information Product Code Number Description IU (Europe) IU (Europe) or BM485-CIP (North America) Replacement data protection battery for NAE55 and NIE59. Rechargeable gel cell battery: V,. Ah, with a typical life of 3 to 5 years at C (70 F) Replacement data protection battery for NAE35, NIE39, NAE45, NIE45, NIE49, NCE5, or NIE9. Rechargeable NiMH 3.6 VDC, 500 mah battery with a typical life of 5 to 7 years at C (70 F). (Higher operating temperatures reduce battery life.) RS3-to-RS485 converter, 30 VAC RS3-to-RS485 converter, 4 VAC European market: order this accessory in AOMS from the Essen Distribution Center. North American market: order this accessory from dutec ( or ), specify vendor #90904.

13 Table 0: M-Bus Accessories Ordering Information Product Code Number Description SIS-MBUSSCSL-0E SIS-MBUSSCLL-0E SIS-MBUSRPLL-0E SIS-MBUSRPLH-0E SIS-MBUSNCLL-0E SIS-MBUSNCLH-0E INT-D-KAB0 RS3-to-M-Bus level converter for up to 6 unit loads; 4 VAC/VDC RS3-to-M-Bus level converter for up to 00 unit loads; 4 VAC/VDC RS3-to-M-Bus level repeater for up to 00 unit loads; 4 VAC/VDC RS3-to-M-Bus level repeater for up to 00 unit loads; 30 VAC IP-to-M-Bus level converter for up to 00 unit loads; 4 VAC/VDC IP-to-M-Bus level converter for up to 00 unit loads; 30 VAC Optional connection cable SUB-D to RJ- for use with SIS-MBUSSCLL-0E European market: order this accessory in AOMS from the Essen Distribution Center. Table : KN Accessories Ordering Information Product Code Number Description SIS-KNNIL-0E SIS-KNNRL-0E KN IP interface module to connect KN line through Ethernet to an NIEx9 KN IP router to connect KN line through Ethernet to an NIEx9, including line or area coupler functionality European market: order this accessory in AOMS from the Essen Distribution Center. Modbus Integrations require one or more vendor Modbus definition (VMD) tables for specific third-party equipment. You can purchase tables from your regional System Integration Services (SIS) office, or you can create the tables with the VMD Generator Express (VGE) tool. To obtain a license, attend the training listed in the following table. Table : VGE Tool Training Product Code Number C-0077 Description VGE Tool Software Training (North America) The VGE tool is required to generate custom Modbus mapping tables for the NIE. PTK-CONT-6 VGE Tool Software Software Training (Europe and Asia) The VGE tool is required to generate custom Modbus mapping tables for the NIE. 3

14 Technical Specifications Table 3: NIE9 Power Requirement Power Consumption Dedicated nominal 4 VAC, Class power supply (North America), safety extra-low voltage (SELV) power supply (Europe), at 50/60 Hz (0 VAC minimum to 30 VAC maximum) 5 VA maximum for NCE5 only The 5 VA rating does not include any power supplied to devices connected at the NIE binary outputs (BOs). Binary output devices connected to and powered by an NIE can require an additional 5 VA (maximum). Ambient Operating Conditions Ambient Storage Conditions Data Protection Battery Processors 0 to 50 C (3 to F); 0 to 90% RH, 30 C (86 F) maximum dew point -40 to 70 C (-40 to 58 F); 5 to 95% RH, 30 C (86 F) maximum dew point Supports data protection on power failure. Rechargeable NiMH battery: 3.6 VDC 500 mah, with a typical life of 5 to 7 years at C (70 F); Product Code Number: MS-BAT00-0 Supervisory Controller: 9 MHz Renesas SH RISC processor Field Controller: 0 MHz Renesas H8S398 processor Memory Supervisory Controller: 8 MB flash nonvolatile memory for operating system, configuration data, and operations data storage and backup and 8 MB synchronous dynamic random access memory (SDRAM) for operations data dynamic memory Field Controller: MB flash and MB RAM Operating System Network and Serial Interfaces Analog Input/Analog Output Resolution and Accuracy Dimensions (Height x Width x Depth) Housing Microsoft Windows CE embedded MS-NIE9x-0 (MS/TP) or MS-NIE96x-0 (N) One Ethernet port: 0/00 Mbps; 8-pin RJ-45 connector One optically isolated RS-485 FC Bus port or N Bus port; with a pluggable and keyed 4-position terminal block One optically isolated RS-485 SA Bus port; with a pluggable and keyed 4-position terminal block One RS-3-C serial port: standard 9-pin sub-d connectors, that support all standard baud rates One USB serial port: standard USB connector to support an optional, user-supplied external modem Analog Input Points: 6-bit resolution MS-NIE9x-0 (LON) One Ethernet port: 0/00 Mbps; 8-pin RJ-45 connector One optically isolated RS-485 SA Bus port; with a pluggable and keyed 4-position terminal block One RS-3-C serial port: standard 9-pin sub-d connectors, that support all standard baud rates One USB serial port: standard USB connector to support an optional, user-supplied external modem One LONWORKS port; FTT0 78 Kbps; pluggable, keyed 3-position terminal block Analog Output Points: 6-bit resolution and +00 mv accuracy on 0-0 VDC applications 55 x 70 x 64 mm (6. x 0.6 x.5 in.) Minimum mounting space required: 50 x 370 x 0 mm (9.8 x 4.6 x 4.3 in.) Plastic housing Plastic material: ABS and polycarbonate Protection: IP0 (IEC6059) Mounting Shipping Weight On flat surface with screws on three mounting clips or a single 35 mm DIN rail. kg (.7 lb) 4

15 Table 3: NIE9 Compliance Table 4: NIE39 and NIE49 Power Requirement Power Consumption Ambient Operating Conditions Ambient Storage Conditions Data Protection Battery Processor Memory Operating System Network and Serial Interfaces Housing United States: UL Listed, File E0704, CCN PAZ, UL 96, Energy Management Equipment, FCC Compliant to CFR47, Part 5, Subpart B, Class A Canada: UL Listed, File E0704, CCN PAZ7, CAN/CSA C. No. 05, Signal Equipment, Industry Canada Compliant, ICES-003 Europe CE Mark - Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive. Australia and New Zealand RCM Mark, Australia/NZ Emissions Compliant BACnet International: BACnet Testing Laboratories (BTL) Listed BACnet Building Controller (B-BC) Dedicated nominal 4 VAC, Class power supply (North America), SELV power supply (Europe), at 50/60 Hz (0 VAC minimum to 30 VAC maximum) 5 VA maximum 0 to 50 C (3 to F); 0 90% RH, 30 C (86 F) maximum dew point -40 to 70 C (-40 to 58 F); 5 95% RH, 30 C (86 F) maximum dew point Supports data protection on power failure. Rechargeable NiMH battery: 3.6 VDC 500 mah, with a typical life of 5 to 7 years at C (70 F); Product Code Number: MS-BAT MHz Renesas SH RISC processor 8 MB flash nonvolatile memory for operating system, configuration data, and operations data storage and backup and 8 MB SDRAM for operations data dynamic memory Microsoft Windows CE embedded MS-NIE390-/MS-NIE490- (MS/TP) One Ethernet port: 0/00 Mbps; 8-pin RJ-45 connector One optically isolated RS-485 port: 9,600, 9.k, 38.4k, or 76.8k baud; pluggable and keyed 4 position terminal blocks Two RS-3-C serial ports: standard 9-pin sub-d connectors, that support all standard baud rates Two USB.0 serial ports: standard USB connectors support an optional, user-supplied external modem Plastic housing material: ABS + polycarbonate MS-NIE390-/MS-NIE490- (LON) One Ethernet port: 0/00 Mbps; 8-pin RJ-45 connector One optically isolated RS-485 port: 9,600, 9.k, 38.4k, or 76.8k baud; pluggable and keyed 4 position terminal blocks Two RS-3-C serial ports: standard 9-pin sub-d connectors, that support all standard baud rates Two USB.0 serial ports: standard USB connectors support an optional, user-supplied external modem One LONWORKS port; FTT0 78 Kbps; pluggable, keyed 3-position terminal block UL94-5VB Protection: IP0 (IEC 6059) Mounting Dimensions (Height x Width x Depth) Shipping Weight On flat surface with screws on three mounting clips or a single 35 mm DIN rail 3 x 70 x 6 mm (5. x 0.6 x.5 in.) Minimum space for mounting NIE: 0 x 350 x 0 mm (8.3 x 3.8 x 4.3 in.). kg (.7 lb) 5

16 Table 4: NIE39 and NIE49 Compliance United States: UL Listed, File E0704, CCN PAZ, UL 96, Energy Management Equipment; FCC Compliant to CFR47, Part 5, Subpart B, Class A UL Listed, File S4977, UUKL 864-9th Edition, Smoke Control Equipment (MS-NIE39x0-U and MS-NIE49x0-U models only) Canada: UL Listed, File E0704, CCN PAZ7, CAN/CSA C. No. 05, Signal Equipment; Industry Canada Compliant, ICES-003 Europe: CE Mark Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive. Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant BACnet International: BTL Listed B-BC Table 5: NIE59xx-3 Power Requirement Power Consumption Ambient Operating Conditions Ambient Storage Conditions Data Protection Battery Clock Battery Processor Memory Dedicated nominal 4 VAC, Class power supply (North America), SELV power supply (Europe), at 50/60 Hz (0 VAC minimum to 30 VAC maximum) 50 VA maximum 0 to 50 C (3 to F); 0 to 90% RH, 30 C (86 F) maximum dew point -40 to 70 C (-40 to 58 F); 5 to 95% RH, 30 C (86 F) maximum dew point Supports data protection on power failure. Rechargeable gel cell battery: V,. Ah, with a typical life of 3 to 5 years at C (70 F); Product Code Number: MS-BAT00-0 Maintains real-time clock through a power failure. Onboard cell: typical life of 0 years at C (70 F).46 GHz Intel Atom Bay Trail E385 processor for MS-NIE59xx-3 models 6 GB flash nonvolatile memory for operating system, configuration data, and operations data storage and backup for MS-NIE59xx-3 models. GB DDR3 SDRAM for operations data dynamic memory for all models Operating System Network and Serial Interfaces Housing Johnson Controls OEM Version of Microsoft Windows Embedded Standard 7 with SP (WES7) MS-NIE5960- (MS/TP) One Ethernet port: 0/00/,000 Mbps; 8-pin RJ-45 connector Two optically isolated RS-485 ports: 9,600, 9.k, 38.4k, or 76.8k baud; pluggable and keyed 4 position terminal blocks Two RS-3-C serial ports: standard 9-pin sub-d connectors, that support all standard baud rates Two USB.0 serial ports: standard USB connectors support an optional, user-supplied external modem Plastic housing with internal metal shield MS-NIE590- (LON) One Ethernet port: 0/00/,000 Mbps; 8-pin RJ-45 connector Two optically isolated RS-485 ports: 9,600, 9.k, 38.4k, or 76.8k baud; pluggable and keyed 4 position terminal blocks Two RS-3-C serial ports: standard 9-pin sub-d connectors, that support all standard baud rates Two USB.0 serial ports: standard USB connectors support an optional, user-supplied external modem One LONWORKS port; FTT0 78 Kbps; pluggable, keyed 3-position terminal block Plastic material: ABS + polycarbonate; Protection: IP0 (IEC 6059) Mounting Dimensions(Height x Width x Depth) Shipping Weight On flat surface with screws on four mounting feet or on dual 35 mm DIN rail 6 x 33 x 96.5 mm (8.9 x 3. x 3.8 in.) including mounting feet Minimum space for mounting: 303 x 408 x 48 mm (.0 x 6. x 5.8 in.) 4.5 kg (9.5 lb) 6

17 Table 5: NIE59xx-3 Compliance United States: UL Listed, File E0704, CCN PAZ, UL 96, Energy Management Equipment, FCC Compliant to CFR47, Part 5, Subpart B, Class A Canada: UL Listed, File E0704, CCN PAZ7, CAN/CSA C. No. 05, Signal Equipment, Industry Canada Compliant, ICES-003 Europe: CE Mark - Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive. Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant BACnet International: BTL Listed B-BC Table 6: Computer Recommendations for NIE89 Installation/Upgrade Recommended Computer Platform Intel eon E5506,.3 GHz, 4 MB Cache x 60 GB 7.K SATA, 8.9 cm (3.5 in.) Cabled 3 Gbps, RAID configuration with add-in SAS6/iR (SATA/SAS Controller) Recommended Memory Hard Disk Supported 64-bit Operating Systems and Software Supported Operating Systems for Metasys Client Computers 8 GB RAM minimum 60 GB minimum Windows Server 06 (64-bit) Windows Server 0 R with Update (64-bit) Windows Server 0 (64-bit) Note: Microsoft.NET Framework 3.5 Service Pack (SP) and Microsoft.NET Framework 4.6. are required for any of the operating systems. Windows 0 Pro and Enterprise Editions with Anniversary Update (version 703) (64-bit) Windows 8. Pro and Enterprise Editions with Update (64-bit) Windows 7 Professional, Enterprise, and Ultimate Editions with SP (64-bit) Windows 7 Professional, Enterprise, and Ultimate Editions with SP (3-bit) Apple macos 0. Sierra Apple OS 0. El Capitan Apple OS 0.0 Yosemite Internal Optical Drive Supported Web Browser Software for Metasys Site Management Portal Client Computers Note: Apple operating systems are supported for Metasys client computers only. Also, in Apple OS, you cannot view Graphics+ graphics in the Site Management Portal UI. DVD ROM, SATA Windows Internet Explorer Update version.0.47 or later Note: In Internet Explorer, select the Use Microsoft compatibility lists option, found under Tools > Compatibility View Settings, to ensure that websites appear and function correctly. Google Chrome version 6 or later Apple Safari or later Other browsers, such as Mozilla Firefox, may also be used but are not fully supported. Supported Virtual Environments Microsoft Hyper-V, VMWare 7

18 Table 6: Computer Recommendations for NIE89 Installation/Upgrade Network Communication Selectable Network Interface (if computer has multiple network cards, during installation, select the network card that was configured for Metasys system use before installation) Ethernet network interface card 0/00/000 Mbps (00 Mbps or better recommended) Recommended Data Protection Uninterruptible power supply (UPS) Smart-UPS SC 450VA, 80 W, 0 VAC input/output, NEMA 5-5R output connections, OEM Part No. SC450RMU The performance specifications are nominal and conform to acceptable industry standard. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products. North American Emissions Compliance United States Emissions Compliance This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the users will be required to correct the interference at their own expense. Canadian Emissions Compliance This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Building Technologies & Solutions 507 E. Michigan Street, Milwaukee, WI 530 Metasys and Johnson Controls are registered trademarks of Johnson Controls. All other marks herein are the marks of their respective owners. 07 Johnson Controls Published in U.S.A. 8