SPECIFICATIONS.

Transcription

1 DIGIMETRN [Position the bottom side for ideal installation of multiple detector sets] Insert a pin here to adjust position. [A sample image: Installation of multiple detector sets] IPDB505F / 0.5μm / 5mm Place a volt here to lock detector. Very small, boxshaped design. Easily assembled into any machinery. Since origin detection mechanism loaded, eliminates to readjust whenever power is turned off. A unique bottompositioned design prevents excessive tightening on stem thus eliminates malfunction. In compliance with IP67 degree of protection and EC directives on CE marking. IPDP510 / 0. DIGIMETRN Position the bottom side for ideal installation of multiple detector sets. Prevents detector body pressured by other apparatus thus eliminating malfunction. Use pin for easy reinstallation upon regular maintenance. IPDB505F/05M IPDB505F/2M IPDB505F/2M03N IP protection level rigin position attachments Rubber bellows 5mm 0. or less 1.08N or less 0.3N or less IP67 equivalent About 1.3mm from the bottom Approx. 63g Approx. 110g 0.5m F201 M138 Nonstandard specifications (model, measuring force, etc.) are available upon request. 8ømm, slimbody design to save space and enable flexible configuration. Since origin detection mechanism loaded, eliminates to readjust whenever power is turned off. A nut installed type is available in order to solve the problem of overtightening the stem portion. In compliance with IP67 degree of protection and EC directives on CE marking. IPDP510N / 0. IPDP510/2M IPDP510/2M03N IPDP510N/2M IPDP510N/2M03N IP protection level rigin position attachments Rubber bellows 10mm 0. or less 1.08N or less 0.3N or less 1.08N or less 0.3N or less IP67 equivalent About m from the bottom Approx. 130g F201 M137 Nonstandard specifications (model, measuring force, etc.) are available upon request. 141

2 IPDB535 / 0.5μm / 35mm IPDCC1 Small size DIN (48 x 48mm) DIGIMETRN Yet with high resolution of 0.5 μm, offers long stroke range of either 15 or 35 mm depending on model. ffers outstanding measuring accuracy over the full range as well as excellent mechanical stiffness. Ideal characteristics for installation into other machinery. Since origin detection mechanism loaded, eliminates to readjust whenever power is turned off. In compliance with IP67 degree of protection and EC directives on CE marking. IPDB515 / 0.5μm / 15mm DIGIMETRN [Easily viewable 2color display] Depending on the set value, the backlight of the LCD switches to green (K) or to red (NG). The result of tolerance check can be confirmed from a distance. Within the tolerance utside the tolerance IPDB535/2M IPDB515/2M 35mm 15mm 0.5μm 2.0µm or less 1. or less 2.5N or less 1.5N or less IP protection level IP67 equivalent rigin position About m from the bottom Approx. 225g Approx. 165g F201 attachments Rubber bellows M142 M139 Nonstandard specifications (model, measuring force, etc.) are available upon request, Small size DIN (48 48 mm) All models equip fault detection functionality. BCD output and RS232C output models available. Equips useful functions such as 7rank sorting function and peak measuring function. IPDCC1 IPDCC1/B IPDCC1/RS LCD with 6 digits and polarity, mode display and twocolor backlight 0.1/1/10μm (Can be switched depending on the setting) range ~ mm ±1digit I/ connector (NG/K/+NG,Error) Input/utput BCD connector RS232C Addition/subtraction function Reset at any optional point by the front switch or external signal +/ (Can be set switched depending on the setting) 6 digits and polarity Sorting function 7 ranks (Up to 7 types can be registered) +P, P, PP, (PP) /2 (+P: Maximum, P: Minimum) 12V24V (±10%) Accessories Frame for panel mount Dedicated option Cable with a BCD (sold separately) output connector RS232C cable 142 Tel

3 IPDFCC*/* Small size DIN (96 x 96mm) MMS (Multi, MultiProfile System) [ Multi ] Each of two display areas displays different measurement modes. Sample image Upper display area: the present value Lower display area: the deflection (maximum value minimum value) IPDSC1R Cigarettebox size, ultra small counter. Removable display area. DIGIMETRN Computes the sum or difference of two detector sets (two channels). Also equips peak measurement functionality to measure deflection and eccentricity warping. All models equip fault detection functionality. BCD output and RS232C output models available. Registers and displays in each of two display areas seven different data such as measuring condition or upper and lower limit tolerance set values. range Terminal block Input/ BCD connector utput RS232C Addition/subtraction Function Sorting function Accessories *1 ption DIGIMETRN Highspeed storage of up to 2,048 data in 1 msec. Each counter can store up to 2,048 measured data in its internal memory. The data can be stored in 1 msec cycles. Since the data can be output through RS232C after storage, IPDSC1R can be utilized for shape measurement. Measured values from a number of counters are stored synchronously Sampling commands from external systems can be synchronized between counters with hardware, and can be stored simultaneously. Alternatively, the counters can be divided into a number of groups and each group can be controlled with a different timing.. perations can be performed freely on the measured values from several counters. n the base unit, the measured values from multiple detectors can be calculated, displayed and output. For example, the average of the values measured by 3 counters, or the sum of the values measured by 16 counters can be obtained. By selecting the calculation method, Max Min of multiple measured value can be obtained. It is also possible to set constants for calculations of detector measurement values. IPDFCC1 IPDFCC1/B IPDFCC1/RS IPDFCC2 IPDFCC2/B IPDFCC2/RS LCD with 6 digits and polarity (two rows), mode display and twocolor backlight 0.5/1/5/10μm (Can be switched depending on the setting) ~ mm ±1digit (NG/K/+NG, Error) Approx. 630g [DIN rail installed] Reset at any optional point by the front switch or external signal +/ (Can be switched depending on the setting) 6 digits and polarity 3 ranks (Up to 7 types 2 rows can be registered) +P, P, PP, (PP)/2 (+P: Maximum, P: Minimum) Terminal Block: 12V24V (±10%), DC IN Jack: DC9V AC adapter *1 Approx. 670g Approx. 690g Approx. 640g Approx. 680g Plug connector 1 Plug connector 2 Plug connector cover 1 EXT IN Jack 1 Plug connector cover 2 IPDSC1RP (Base Unit) IPDSC1RC (SubUnit) Power usage range Maximum sets installed DC1224V±10% Ripple (PP) 10% or less 200mA or less (when detector set connected) Polarity and 6 digits, mode, green/red backlight LCD 0.1/1/10μm (selectable) ~ mm ±1 digit. (when 0.5μm resolution detector set used) 16 sets (1 base unit + 15 subunit) Reset at any optional point by the front switch, external signal or RS command. 6 digits and polarity +P, P, PP, (PP)/2 (+P: Maximum, P: Minimum) +/ (Can be switched depending on the setting) Equipped NG/K/+NG Fifteen subunits can be connected to a base unit. Using RS232C to connect to the base unit enables the measured values from all counters to be read and a variety of commands to be output. Error functionality Fault detection Measurement condition registered Computation functionality RS232C Measurement value storage Input 2ch +A+B, +AB, A+B, AB Seven items (key, RS command) Approx. 730g EXT IN Jack 1 +// /average Equipped Not equipped 2048 data items Reset, storage commands, data hold, peak clear 143

4 DIGIMETRN Enhanced functionality to better suit changing demand. Since origin detection mechanism loaded, eliminates to readjust whenever power is turned off. Also available is the Airlift Functionalityequipped model that enables automatic measurement. DGB1001B / 1μm DGB2501B / 1μm / 25mm 144 DGB1001B DGB1005B DGB1001B/AL DGB1005B/AL DGB2501B DGB2505B 10mm 25mm or less 1.08N or less 1.47N or less 1000mm/sec rigin position About m from the bottom Pneumatic lift Builtin Approx. 180g Approx. 200g F201 attachments Rubber bellows M135 M136 Nonstandard specifications (model, measuring force, etc.) are available upon request, ptional extension cable DGBFCB*/* Small size DIN (96 x 96mm) range Input/ utput Addition/subtraction Function Sorting function Accessories Terminal block BCD connector RS232C Length SDA2340(1)2M 3m SDA2340(2)3M DGB1005B / 5μm 4m SDA2340(3)4M 5m SDA2340(4)5M DGB2505B / 5μm / 25mm 8m SDA2340(5)8M Tel m SDA2340(6)10M Computes the sum or difference of two detector sets (two channels). Also equips peak measurement functionality to measure deflection and eccentricity warping. All models equip fault detection functionality. BCD output and RS232C output models available. Registers and displays in each of two display areas seven different data such as measuring condition or upper and lower limit tolerance set values. DGBFCB1 DGBFCB1/B DGBFCB1/RS DGBFCB2 DGBFCB2/B DGBFCB2/RS LCD with 5 digits and polarity (two rows), mode display and twocolor backlight 1/5/10μm (Can be switched depending on the setting) ~ mm ±1digit 1000mm/sec (NG/K/+NG, Error) Approx. 630g Reset at any optional point by the front switch or external signal +/ (Can be switched depending on the setting) 5 digits and polarity 3 ranks (Up to 7 types can be registered) +P, P, PP, (PP)/2 (+P: Maximum, P: Minimum) Terminal Block: 12V24V (±10%), DC IN Jack: DC9V AC adapter *1 Approx. 670g Approx. 690g Approx. 640g Approx. 680g Plug connector 1 Plug connector cover 1 EXT IN Jack 1 2ch +A+B, +AB, A+B, AB Plug connector 2 Plug connector cover 2 Approx. 730g EXT IN Jack 1

5 DIGIMETRN DGM0501B / / 5mm DGM0505B / 5μm / 5mm DGM1001B / 1μm DGM1005B / 5μm DGM2501B / / 25mm DGM2505B / 5μm / 25mm The range can be selected from 2, 5, 10 or 25 mm (for 1 μm / 5 μm resolution models). By employing the optical linear encoder, high accurate measuring is provided. ption Release M140 Nonstandard specifications (measuring force, etc.) are available upon request. *2 Various other backs are available. DGM0201BT / 1μm / m DGM0205BT / 5μm / m DGM0501B DGM0505B DGM1001B DGM1005B DGM2501B DGM2505B DGM0201BT DGM0205BT 5mm 10mm 25mm m or less 1.08N or less 1.47N or less 0.98N or less 300mm/sec 600mm/sec 300mm/sec 600mm/sec 300mm/sec 600mm/sec 300mm/sec 600mm/sec Approx. 95g Approx. 105g Approx. 165g Approx. 100g Contact point *1 F201 F112 Standard Back *2 Flat back (FM104) Flat back (FM1032) attachments Rubber bellows M132 ption Length 3m 4m 5m 8m 10m Breeches cable 145

6 DTHP Various measuring forces are available. DTHP A The zero point is positioned on the bottom dead center side, compared to ordinary models, to allow immediate measurement. High durability type ELEMETRN Electric Micrometers DTHL Very low measuring force of N and up. DTHL U Universal type to allow the direction of measurement to be changed freely. Very low measuring force of N and up. DTHP16AL Air lift structure. Very suitable for automatic measurements. DTHP16ALA Air lift structure. Very suitable for automatic measurements. The zero point is positioned on the bottom dead center side, compared to ordinary models, to allow immediate measurement. High durability type. DTHP S Smallsized and very suitable for installation in a machine. The ELEMENTRN series provides electric displacement sensors using a differential transformer in the detector.they have high sensitivity and high accuracy, and can be used for a very wide range of measurement, such as when a low measuring force is required. Two types of detectors are available: the plunger type (DTHP type) and the level type (DTHL type). s can be selected to suit respective applications. The detectors are interchangeable. A variety of detectors in response to all measuring conditions. Very suitable for measurement requiring reading in 0.1 μm, measurement requiring a low measuring force, etc. Measuring range Stroke Zero point position Repeatability guaranteed temperature range perating temperature (main body only) Standard Contact point *1 attachments Rubber bellows DTHP SH Smallsized and very suitable for installation in a machine. Cord laterally connected type DTHP20 DTHP40 DTHP70 DTHP16AL DTHP20S DTHP40S DTHP70S DTHP20SH DTHP40SH DTHP70SH DTHP70W DTHP50L 0.196N 0.392N 0.686N 0.157N 0.196N 0.392N 0.686N 0.196N 0.392N 0.686N 0.686N 0.49N ±1mm (0.4 ~ + 1mm in the case of type A) 4mm (3.5mm in the case of type A) ±0.7mm m ±1mm 3.m 0.5 ~ + 1.0mm 18mm Approx. m (0.5mm in the case of type A) Approx. 1mm Approx. 1.m Approx. 0.5mm 0.3µm Approx. 25g F001 0 ~ 50 C Approx. 20g 1.5m M131 DTHP50L A long stroke assures reliable installation in a machine. F171 Approx. 23g DTHP70W Waterproof structure. Cord is oilresistant, heatresistant, and coldresistant. Approx. 100g 2.0m F001 M130 Approx. 170g 1.5m F Measuring range Stroke Zero point position Repeatability Frictional force of probe guaranteed temperature range perating temperature (main body only) Standard attachments Contact point *1 DTHL02 DTHL08 DTHL15 DTHL02U DTHL08U DTHL15U N N 0.147N N N 0.147N ±0.5mm 1.5mm Approx. 0.5mm 0.3µm 1.47N 0 ~ 50 C Approx. 115g 1.5m F138 F118 All the measuring forces are those in a state where no rubber bellows is attached. ( Each measuring force is about 5 to 15 g higher if a rubber bellows is attached.) Nonstandard specifications (model, measuring force, etc.) are available upon request, Tel

7 ELEMETRN Electric micrometers DTMCA [Amplifiers] DTMFA, rank sorting, and sum or difference computation can be effected as standard features. Small size, analog indication type Graduation: 0.2 μm Sensitivity selectable (3 ranges) RS232C output DTMCA/H Small size, analog indication type Graduation: 0.1 μm Sensitivity selectable (3 ranges) RS232C output DTMFA (front) ELEMETRN Electric micrometers Sensitivity selection HIGH MED LW AUT Indication error Sum or difference Zero point adjusting range Analog output guaranteed temperature range perating temperature utside dimensions DTMCD Small size, digital display type : 0.1 μm Sensitivity selectable (2 ranges) RS232C output DTMFA ±99.9μm, 0.1μm ±999μm, 1μm Automatic selection of HIGH or LW ±1%rdg±1 digit +A+B, +AB, A+B, AB ±20μm or more 3 digits in LED display and polarity () 10ms or less ±1V/full scale 0 C ~ 40 C AC100V ± 10% 50 / 60Hz 12VA 204(W) 249(D) 82(H) mm Approx. 3.2kg DTMCA DTMCA/H DTMCD Sensitivity selection HIGH MED LW ±5μm (Graduation 0.2μm) ±25μm (Graduation 1μm) ±125μm (Graduation 5μm) ±2.5μm (Graduation 0.1μm) ±25μm (Graduation 1μm) ±125μm (Graduation 5μm) ±99.9µm, 0. ±999µm, Indication error Zero point adjusting range Analog output guaranteed temperature range perating temperature utside dimensions HIGH: Within ±1 graduation MED/LW: Within ±1/2 graduation ±20µm or more (Pointer) Approx. 0.5 sec/full scale DC±1V / full scale 0 C ~ 50 C AC100V±10% 50/60Hz, Approx. 5VA 104(W) x 70(D) x 149(H) mm Approx. 0.9kg ±1% rdg ± 1 digit 3 digits in LED display and polarity () 100ms (max) AC100V ±10% 50/60Hz, Approx. 7VA Approx. 0.8kg 147