Liquid Gold WE DO YOUR LEVEL BEST. Introduction

Transcription

1 Liquid Gold Introduction WE DO YOUR LEVEL BEST Global demand for commodity and specialty chemicals has risen to $3B a year, and this Liquid Gold pervades every sector of our modern economy. Can you name an industry that has no reliance on or association with chemicals in the manufacturing, integration or delivery of their products or services? Since 2004, chemical prices have ascended rapidly due to rising oil, energy and transportation costs; increased global demand; and supply shortages caused by manufacturing relocation to low-cost producer countries. Transforming raw materials into refined chemical products requires energy-intensive processes that consume vast amounts of oil and gas feedstock for heating and cooling. Over the past four years, crude oil prices have risen 300%, natural gas is up 100% and electricity is up 20%. The resulting rise in fuel and lubricant prices has redefined the shipping, rail and truck transportation costs associated with chemical delivery. Globalization and the emergence of Asia have fueled demand and shifted new production away from North America and Europe. More than a blip, the landscape has and will continue to change for the foreseeable future. Chemical distributors, industrial manufacturers and municipalities have entered a new era where rising costs and margin compression are inevitable without equivalent gains in productivity. Now more than ever, automation plays a critical role in the cost-effective delivery, inventory and use of Liquid Gold. Level measurement, control and information technology integration is the solution. Fax:

2 Introduction Level Automation Map 2 Tel: levelsolutions@flowline.com

3 Level Automation Map. Introduction Introduction Fax:

4 Introduction About Flowline FLOWLINE Founded in 1991, Flowline supplies industrial manufacturers and municipalities with tank inventory monitoring, automation and safety solutions for corrosive liquids. Demand for chemical storage and feed systems has grown steadily since the 1960 s, fueled by industrial automation, municipal water treatment and environmental safety regulations. Our advanced thermoplastic level measurement, switch and control technologies enable users to best manage their liquid assets with dependable solutions that reduce fluid handling costs. Flowline broadly serves most liquid process markets including semi-conductor, chemical, health, electronic, printing, transportation, food & beverage, power generation, biotech, oil & gas, pharmaceutical, metal finishing, lubrication, water and wastewater treatment. Design and process engineers, system integrators, original equipment manufacturers and end user customers are well served through our global network of technical distributor partners. Together, we deliver innovative solutions that automate tank processes, protect the environment and ensure workplace safety. CORE TECHNOLOGY Flowline s core technology is non-contact ultrasonic level measurement. This highly versatile and reliable technology is ideal for a wide range of liquid applications including those with chemicals, oil, water and wastewater. The sensor emits four high frequency sound pulses per second from the base of the transducer. Each pulse travels through the air gap, reflects off the liquid surface and returns to the transducer where its received. The temperature compensated sensor calculates the time interval from pulse transmission to receipt, and translates this into a distance measurement based upon the speed of sound. Non-contact ultrasonic level technology functions well in harsh environments, requires little or no maintenance and provides better reliability and accuracy then contact level devices which often suffer from prolonged liquid contact. Flowline ultrasonic sensors are packaged in advanced thermoplastics for the highest corrosion resistance. Flowline.com is a comprehensive product and application reference database filled with level solution content. Go to flowline.com, view our application success stories and customer testimonials. The powerful search function enables users to sort our entire database, or do a narrow search by product data sheet, manual or application. The online catalog provides selection, configuration, technical and application data with PDF file download. 4 Tel: levelsolutions@flowline.com

5 Flowline Advantage Introduction DSP T e c h n o l o g y Accuracy Dead band Beam width Obstacles Vapor Agitation Flowline sensors feature our patented, auto-adaptive Digital Signal Processing technology that delivers the Flowline Advantage, accurate and reliable ultrasonic level measurement from1m-10m. This digital imaging technology creates a living map of your tank process and continuously optimizes: Sensor power Fail-safe diagnostics Signal output filtering Environmental noise rejection Obstacle recognition and rejection The Flowline DSP Advantage delivers the following application benefits with 0.2% accuracy and little or no degradation over range: Narrow 2" beam for placement near tank walls or obstacles Reliable measurement through most aqueous based vapor Tight 2" dead band optimizes the filling capacity of small tanks Adaptive signal output filtering smooths level surface conditions QUALITY COMMITMENT Our mission is to provide our customers with products and services that meet their requirements and exceed their expectations. We do your level best by relentlessly pursuing continuous improvement in our business practices and instilling the following principles throughout our culture: Company commitment to deliver customer satisfaction Action culture founded in meeting customer requirements Empowerment to provide great products and service on time Measurement driven to deliver continuous improvement Fax:

6 Introduction What s New EchoPod - 14, 15 CHEMICAL FEED LEVEL CONTROL & MEASUREMENT Chemical feed and small tank systems use float or conductance level switches that fail due to contact with corrosive or sticky liquids. The associated maintenance, replacement and downtime costs are many times higher than the switch cost. You requested a cost-effective, small sensor for drum, IBC and OEM skid tank level automation. EchoPod is a non-contact level switch, control and measurement solution designed to replace multi-point float switches in small tank chemical feed or skid applications. The multi-function sensor has four relays with embedded logic for pump and valve control. EchoPod is loop powered with a 4-20 ma measurement output. EXPLOSION PROOF LEVEL MEASUREMENT EchoSafe - 18, 19 Process markets such as petrochemical, energy, municipal wastewater treatment, pulp & paper and mining are hazardous environments that require explosion proof or intrinsically safe measurement. You requested an explosion proof ultrasonic level transmitter for use in XP classified areas or where metal enclosures are preferred. The explosion proof EchoSafe is FM approved for hazardous storage, day tank or sump level measurement and control applications. Certified for Class 1, Div. 1, Groups A, B, C, D, Class II & III, Div. 1, Groups E, F, G environments, EchoSafe features a rugged windowed enclosure and PVDF transducer for harsh corrosive liquids. EXPLOSION PROOF LEVEL INDICATION FluidWell - 22 Local indication and control is an important part of many explosion proof level systems because the conduit, installation and downtime costs are higher than general-purpose environments. You requested an explosion proof meter for use with our EchoSafe level transmitter as a total XP measurement and indication solution. The explosion proof FluidWell meter is UL and CSA approved for level indication in a hazardous environment. Certified for Class 1, Div. 1, Groups C & D; Class II, Groups E, F & G; Class III environments, the wall mounted, loop powered meter features a 5-1/2 digit main display and 11-digit secondary display with proportional span graph. DeltaSpan - 31 WASTE & STORM WATER LEVEL MEASUREMENT Depending on their location and process, municipal lift stations collect considerable debris or surface foam that may impact the performance of an ultrasonic sensor. You requested a pressure level transmitter for the measurement of debris or foam filled waste or storm water lift stations. Constructed of 316 SS, the submersible DeltaSpan level transmitter is designed for storm or wastewater applications where ultrasonic is not attractive due to foam or debris. The clog-resistant design features a diaphragm shield, surge protection and filtered vent to block particulates. 6 Tel: levelsolutions@flowline.com

7 What s New Introduction MULTI-CHANNEL PROGRAM RELAY CONTROL Bulk storage tanks, day tanks, chemical feed tanks and lift stations are often located together to reduce installation and control costs. You requested a multi-channel programmable logic relay controller with a bright graphic display, advanced relay control functions and data-logging that can be configured for up to 4 tanks within a distributed control system. The Commander programmable logic relay controller has 4 analog input channels and 6 programmable relays for multi-tank level applications. The DIN controller features a backlit LCD graphic display, push button configuration, data-logging with removable MicroSD card and a wide array of pump and valve control functions. Commander - 33 WASTE SUMP & DAY TANK LEVEL CONTROL Industrial waste sumps and chemical day tanks contain coating or corrosive liquids that often cause contact sensors to fail. These applications also require pump or valve control for automatic fill or empty. You requested a non-contact level controller with integral display and push button configuration that s easy to use. The EchoSwitch II ultrasonic level switch is AC powered with 3 programmable relays and a wide range of control functions. The LCD display and intuitive push button menu make setup fast and easy. From simplex to lead-lag, alternation to duplexing control, EchoSwitch II does it all with reliable, noncontact level detection. EchoSwitch II - 36, 37 GENERAL PURPOSE LEVEL MEASUREMENT Most level transmitters are burdened in size and cost with display and push button hardware that s only used once. PC configuration offers other features and its market acceptance grows each year. You requested a non-contact, level transmitter for bulk tank applications that s small, easy to configure and extremely cost competitive. The EchoSonic II ultrasonic level transmitter is designed for bulk chemical, water and wastewater applications. PC configured with our WebCal software, users enjoy PDF wiring schematics and configuration file management tools. This simple, general-purpose sensor delivers robust, noncontact level measurement. EchoSonic II - 26, 27 SINGLE-CHANNEL LEVEL INDICATION & CONTROL Single-channel meters for general purpose, level indication and control are an important part of our offering. You requested a 6-digit, 2-line backlit display with expanded viewing and linearization functions. You also wanted easy configuration, a sensor power supply capable of supporting 2 or 3-wire transmitters and a repeater output. The DataView meter has a large 0.6 main display and 0.46 secondary display with 4 relays. The 32-point linearization function enables volumetric measurement and control. The power supply supports 2 or 3-wire transmitters with a 4-20 ma repeater. The simple menu and backlit display makes configuration easy, day or night. DataView Fax:

8 Introduction Selection Guide BULK STORAGE Application Type Product Range Class Display Cal Output Media Temp Press Page Level Trans EchoSpan 5-10m GP LCD Button 4-20 ma Various 60 C 2 bar Measurement Trans EchoSonic II m GP None WebCal 4-20 ma Various 60 C 2 bar Trans EchoTouch 5m IS/GP LCD Button 4-20 ma Various 60 C 2 bar Trans EchoSafe 7.5m XP LCD Button 4-20 ma Various 60 C 2 bar Indication Type Product Input Mount Display Cal Output Rating Supply Repeat Page and/or PLC Commander 4 Panel LCD Button Relay GP 10-30VDC 4-20 ma 33 Control Meter DataView 1 Panel LED Button Relay GP 85-2VAC None 32 Meter DataLoop 1 Panel LCD Button None GP/IS 12-30VDC None 23 Meter FluidWell 1 Field LCD Button None XP 10-30VDC None 22 Leak Type Product Mat Class Output Orient F-Safe Media Temp Press Page Detection Switch Optic PP/PFA GP Relay Univ Wet Various 80 C 10 bar 53 Switch Ultrasonic PP/PFA IS Relay Univ Wet/Dry Various 80 C 10 bar 50 High Alarm Type Product Supply Class Output Orient Mat. Media Temp Press Page Switch Switch-Pak AC/DC GP/IS Relay Vertical PP/PVDF Various 80 C 10 bar Switch Ultrasonic DC IS Relay Univ PP/PFA Various 80 C 10 bar 50 Low Flow Type Product Supply Class Output Flow Mat Media Temp Press Page Switch Switch Switch-Pro AC/DC GP Relay.04 FPS PP/PVDF Various 80 C 10 bar -67 DAY TANK Application Type Product Range Class Display Cal Output Media Temp Press Page Level Trans EchoSonic II m GP None WebCal 4-20 ma Various 60 C 2 bar Measurement Trans EchoPod 1.25m GP None WebCal 4-20 ma Various 60 C 2 bar Automatic Type Product Range Class Output Cal Mat Media Temp Press Page Fill Switch EchoSwitch II m GP Relay Button PVDF Various 60 C 2 bar Switch EchoPod 1.25 GP Relay WebCal PVDF Various 60 C 2 bar IBC & Drum Application Type Product Range Class Display Cal Output Media Temp Press Page Measurement Trans EchoPod 1.25m GP None WebCal 4-20 ma Various 60 C 2 bar Low Alarm Type Product Range Class Supply Output Mat Media Temp Press Page Switch EchoPod 1.25m GP 24VDC Relay PVDF Various 60 C 2 bar Switch Switch-Pak 3m GP/IS AC/DC Relay PP/PVDF Various 80 C 10 bar Day Tank IBC Bulk Storage Drum 8 Tel: levelsolutions@flowline.com

9 Selection Guide Introduction PROCESS VESSEL Application Type Product Range Class Display Cal Output Media Temp Press Page Level Trans EchoSonic II m GP None WebCal 4-20 ma Various 60 C 2 bar Measurement Trans EchoPod 1.25m GP None WebCal 4-20 ma Various 60 C 2 bar Automatic Type Product Range Class Output Cal Mat Media Temp Press Page Fill/Empty Switch EchoSwitch II m GP Relay Button PVDF Various 60 C 2 bar Switch EchoPod 1.25m GP Relay WebCal PVDF Various 60 C 2 bar Switch Smart Trak 3m GP/IS Relay Adjust PP Various 80 C 0 bar High/Low Type Product Supply Class Output Orient Mat Media Temp Press Page Alarm Switch Vibration DC GP Relay Univ Ryton Waste 80 C 10 bar 51 Switch Ultrasonic DC IS Relay Univ PP/PFA Chem 80 C 10 bar 50 Switch Buoyancy N/a N/a Reed Vertical PP/PVDF Water 80 C 2 bar 52 WASTE SUMP Application Type Product Range Class Display Cal Output Media Temp Press Page Level Trans EchoSonic II m GP None WebCal 4-20 ma Various 60 C 2 bar Measurement Trans EchoPod 1.25m GP None WebCal 4-20 ma Various 60 C 2 bar Automatic Type Product Range Class Output Cal Mat. Media Temp Press Page Empty Switch EchoSwitch II m GP Relay Button PVDF Various 60 C 2 bar Switch EchoPod 1.25m GP Relay WebCal PVDF Various 60 C 2 bar High Alarm Type Product Supply Class Output Orient Mat Media Temp Press Page Switch Switch-Pak AC/DC GP/IS Relay Vertical PP/PVDF Various 80 C 10 bar Switch Vibration DC GP Relay Univ Ryton Waste 80 C 10 bar 51 WASTE TREATMENT Application Type Product Range Class Display Cal Output Media Temp Press Page Level Trans EchoSpan 5-10m GP LCD Button 4-20 ma Various 60 C 2 bar Measurement Trans EchoSonic II m GP None WebCal 4-20 ma Various 60 C 2 bar Trans EchoSafe m XP LCD Button 4-20 ma Various 60 C 2 bar High/Low Type Product Supply Class Output Orient Mat Media Temp Press Page Alarm Switch EchoSwitch II m GP Relay Button PVDF Various 60 C 2 bar Switch Switch-Pak AC/DC GP/IS Relay Vertical PP/PVDF Various 80 C 10 bar Switch Vibration DC GP Relay Univ Ryton Waste 80 C 10 bar 51 Process Vessel Waste Treatment Waste Sump Fax:

10 Introduction Table of Contents INTRODUCTION Liquid Gold Level Automation Map About Flowline Flowline Advantage What's New? Selection Guide Table of Contents 1 2, , 7 8, 9 10, 11 Metal Finishing Baths SMALL TANK LEVEL MEASUREMENT & CONTROL Introduction to Small Tank Level Measurement & Control EchoPod Small Tank Ultrasonic Sensor 12, 13 14, 15 Semiconductor Waste Process Wastewater Bulk Storage BULK LEVEL MEASUREMENT & CONTROL Introduction to Bulk Level Measurement & Control EchoSafe Explosion Proof Ultrasonic Transmitter EchoTouch Intrinsically Safe Ultrasonic Transmitter FluidWell Explosion Proof Meter DataLoop Intrinsically Safe Meter EchoSpan General Purpose Ultrasonic Transmitter EchoSonic II Compact Ultrasonic Transmitter EchoTouch Three-Wire Ultrasonic Transmitter FloaTek Float Transmitter DeltaSpan External Pressure Transmitter DeltaSpan Submersible Pressure Transmitter DataView Single-Channel Meter with Relays Commander Multi-Channel Relay Controller LEVEL SWITCH & CONTROL Introduction to Level Switch & Control EchoSwitch II Bulk Tank Ultrasonic Switch Smart Trak with Compact Relay Controller 16, 17 18, 19 20, , 25 26, , 35 36, 37 38, 39 Sulfuric Acid Bulk Storage Municipal Sewer Lift Station HVAC Cooling Tower Sump 10 Tel: levelsolutions@flowline.com

11 Table of Contents Introduction LEVEL SWITCH & CONTROL Smart Trak with Compact Junction Box Float-Point with Compact Junction Box Switch-Pak with Compact Relay Controller Switch-Pak with Compact Junction Box Switch-Pro with Compact Relay Controller Switch-Pro with Compact Junction Box Switch-Tek Ultrasonic Switch Switch-Tek Vibration Switch Switch-Tek Vertical Buoyancy Switch Switch-Tek Optic Leak Detection Switch Switch-Tek Guard Capacitance Switch Switch-Tek Non-Intrusive Capacitance Switch Switch-Tek Mini-Float Switches Switch-Tek High-Temp Float Switches Level Switch Compact Relay Controller Level Switch Remote Relay Controller Smart Trak Multi-Point Switch Fitting Switch-Pak Single-Point Switch Fitting Strobe Alert Compact Flash Alarm Compact Junction Box FLOW SWITCH & CONTROL Introduction to Flow Switch & Control Thermo-Flo Liquid & Gas Switch Switch-Pro with Compact Relay Controller Switch-Pro with Compact Junction Box Flow Switch Compact Relay Controller Flow Switch Remote Relay Controller REFERENCE Part Number by Page Index Notes 40, 41 42, 43 46, Chemical Tank Farm Oil-Water Separation Trash Slurry Process Industrial Waste Lift Station Marine Lube Oil Storage Residential Storm Lift Station Fax:

12 Small Tank Introduction to Small Tank SMALL TANK PROBLEM Float and conductance level switches often fail due to prolonged contact with corrosive, sticky or dirty liquids requiring expensive maintenance. Floats Stick Rods Corrode SMALL TANK SOLUTION The reliable non-contact EchoPod replaces float and conductance level switches that fail due to prolonged contact with corrosive, sticky or dirty liquids in small tank chemical feed, skid or process applications. The compact sensor puts multi-point level switch, control and measurement functions in the palm of your hand. APPLICATIONS High and Low Alarms High-level spill prevention Pump or heater protection Low-level inventory control Automatic Fill or Empty Pump lift stations Chemical day tanks Skid or process vessels Level Measurement Inventory control Process monitoring MARKETS Chemical feed Metal finishing HVAC Semi-conductor Water treatment Food & beverage Commercial laundry Paint & coatings Lubricants Car & truck wash 12 Tel:

13 Level Measurement & Control Small Tank ECHOPOD MULTI-FUNCTION LEVEL SOLUTION Reliable Non-Contact Technology Patented DSP ultrasonic measurement Narrow 2" beam for use in limited space 2 dead band maximizes tank fill capacity Multi-Point Level Switch 4 programmable 1A SPST relays Direct float switch replacement Level Control & Fail-Safety 1-2 pump or valve control Simplex, duplex or lead-lag Level Measurement Two-wire, 4-20 ma Reversible signal output 12.9 Corrosion Resistant Package Sealed 1" PVDF transducer Polycarbonate 6P enclosure Potted for lasting durability WebCal Configuration Software Fast, accurate & easy to use Custom PDF wiring diagrams Configuration & revision control Fax:

14 Small Tank EchoPod Small Tank Multi-Function Sensor FEATURES DL14-00 Multi-function sensor provides 4-20 ma measurement, switch and control functions Compact sensor with 2" beam width and 2" dead band optimized for small tank applications Four 1A relays programmable for switch or advanced pump or valve control and fail-safety Rugged PVDF transducer and polycarbonate enclosure rated 6P for corrosive applications APPLICATION The general purpose, ultrasonic sensor provides non-contact level detection up to 49.2" (1.25 m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 ma level measurement output. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex or duplex control modes with fail-safe logic. The embedded controller can replace external control hardware. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. EchoPod is broadly selected for small atmospheric day tank, skid or process vessel, lift station, IBC, drum and sump applications. To configure EchoPod, download our free WebCal software and purchase one USB interface tool. DIMENSIONS SPECIFICATIONS Range: Accuracy: Resolution: Beam width: Dead band: Supply voltage: Loop resistance: Consumption: Signal output: Contact type: Loop fail-safety: Relay fail-safety: Hysteresis: Configuration: Temp. comp.: Process temp.: Ambient temp.: Pressure: Enclosure: Encl. material: Strain relief mat.: Trans. material: Cable length: Cable jacket mat.: Process mount: Mount. gasket: Classification: Approval: Compliance: 49.2 (1.25 m) 0.125" (3 mm) 0.019" (0.5 mm) 2" (5 cm) 2" (5 cm) 24 VDC (loop) 400Ω max 0.5W 4-20 ma, two-wire (when loop powered) (4) SPST relays 1A 4 ma, 20 ma, 21 ma, 22 ma or hold last Power loss: Hold last Power on: Open, close or hold last Selectable WebCal PC Windows USB 2.0 Automatic over range F: 20 to 140 C: -7 to 60 F: -31 to 140 C: -35 to 60 MWP = 30 PSI Type 6P, encapsulated, corrosion resistant & submersible PC/ABS FR Santoprene PVDF 48 (1.2 m) Polyurethane 1" NPT (1" G) Viton General purpose cfmus, CE RoHS SOLUTION Float, conductance and capacitance level switches often fail due to prolonged contact with corrosive, sticky or dirty liquids. Such failures drive expensive maintenance or replace costs that go well beyond the original switch cost. For this reason, many users have replaced these devices with non-contact ultrasonic level transmitters in their chemical bulk storage, day tank and wastewater applications. Which brings us to an interesting question. Given that the liquids and problems are the same, why haven't users also replaced out contact switches in their small tank skid and process applications? The answer is simple. Cost, function and size. EchoPod is the only non-contact level measurement, switch and control solution, designed to meet the cost, function and size requirements of small tank applications. 14 Tel: levelsolutions@flowline.com

15 Non-Contact Measurement, Switch & Control Small Tank WEBCAL SOFTWARE Our powerful WebCal software makes EchoPod configuration fast and easy. Take control of your level process with WebCal's intuitive interface, pre-programmed menus, tank set point graphics and custom wiring diagrams. To configure EchoPod, simply create or open a saved configuration file, click "Write to Unit", print or the PDF wiring diagram and install. To get more information and download your free copy, go to EASY CONFIGURATION 169 configurations with pull down menu selections Graphic interface lets you visualize your configuration Applicable level set point fields appear automatically Installs and tests configuration in less than a second Available PDF wiring diagram for each configuration Technical help menu with FAQ's, tips and glossary Rapidly program sensors to the same configuration DOCUMENT CONTROL Save configuration files for future use or reference Print wiring diagrams and configuration text files configuration files to other remote users IP RoHS Compliant EchoPod Process mount 0 NPT (US) 1 G (Metric) Fob USB interface (1), (2) 0 Without Fob 1 With Fob DL14- Ordering Notes 1) One Fob USB interface tool (LI ) and WebCal are required to configure EchoPod. Fobs are universal and one FOB can configure multiple sensors. 2) WebCal is a free download from our (Windows XP compatible). LI Fax:

16 Transmitters Introduction to Bulk Storage INTRODUCTION Flowline offers the most advanced family of level measurement and control solutions for your bulk storage, day tank, process vessel and waste sump applications. Ultrasonic Offered in explosion proof, intrinsically safe and general purpose configurations, our non-contact ultrasonic level transmitters are ideal for acid, caustic, diesel and wastewater storage. Float Constructed of stainless steel for high temperature and pressure, our float transmitters are ideal for water, light oil and diluted acid. Pressure Offered in external mount and submersible configurations, our general purpose pressure transmitters are well suited for water, well water, irrigation, wastewater and sludge. APPLICATIONS Inventory Control Supply management Logistics efficiency Cash management Transport Efficiency Truck routing Demand loading Safety & Compliance Safety spill prevention Regulatory compliance Insurance premiums Process Up-Time Eliminate shortages Schedule deliveries 16 Tel:

17 Level Measurement & Control Transmitters HAZARDOUS MEASUREMENT & INDICATION Transmitter EchoSafe Echotouch IS Series XP8_ LU20 Class XP IS Range 10m 5.4m Display LCD LCD Config. Button Button Output 4-20 ma 4-20 ma Temp. 60 C. 60 C. Press. 2 bar 2 bar Foam Standpipe Standpipe Coating Yes Yes Meter FluidWell DataLoop Series LI25 Class XP IS Display LCD LCD Digits 5 1/2 5 Input 1 1 Mount Field Panel Temp. 80 C. C. Supply Loop Loop Encl. type Window 1/8 DIN Page Vapor Medium Light Page GENERAL PURPOSE MEASUREMENT & CONTROL Transmitter EchoSpan EchoSonic II Echotouch FloaTek DeltaSpan Series LU8_ LU LU30 LV55 LD3_ Class GP GP GP GP GP Range 5m-10m 2.5m-10m 7.4m 2.4m 21m Display LCD No LED No No Config. Button WebCal Button Fixed Fixed Output 4-20 ma 4-20 ma 4-20 ma 4-20 ma 4-20 ma Temp. 60 C. 60 C. 60 C. 85 C. 93 C. Control DataView Commander Series LI55 LI90 Class GP GP Display LED LCD Digits 6 Graphic Input(s) Relays Temp C. 50 C. Press. 2 bar 2 bar 2 bar 13 bar 2 bar Supply 85-2 VAC VDC Foam Standpipe Standpipe Standpipe Yes Yes Coating Yes Yes Yes No LD32 Repeater Yes No Page Vapor Medium Medium Light Heavy Heavy Page Fax:

18 Transmitters EchoSafe XP Ultrasonic Transmitter XP88 APPLICATION FM approved explosion proof for use in hazardous applications, the two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8' or 10 m, and is well suited for challenging corrosive, slurry or waste liquids. Push button calibrated, the transmitter is typically selected for atmospheric bulk storage, day tank and waste sump applications located within a classified area. Media examples include sodium hypochlorite, diesel fuel and paint. The integral display and push button module enable fast and simple calibration. FEATURES Compact XP enclosure with viewing window and dual conduit ports Narrow 3 beam diameter enables flexible installation in applications with limited measurement space Rugged corrosion resistant PVDF transducer and 2" process mount Display indicates air gap of level height distance in inch or centimeter MARKETS Oil & gas Pulp & paper Petrochemical Food & beverage Municipal wastewater Paint & coatings Power generation Transportation Biotech & pharmaceutical SPECIFICATIONS Range: Accuracy: Resolution: Beam width: Dead band: Display type: Display units: Memory: Supply voltage: Loop resistance: Signal output: Signal invert: Calibration: Fail-safe: Process temp.: Temp. comp.: Electronics temp.: Pressure: Enclosure rating: Enclosure mat.: Window mat.: Transducer mat.: Process mount: Conduit entrance: Mount. gasket: Compliance: Classification: Approvals: XP88 8" to 24.6' (20 cm to 7.5 m) XP89 8" to 32.8' (20 cm to 10 m) ± 0.2% of max. range 0.079" (2 mm) 3" (7.6 cm) dia. XP88: 8" (20 cm) XP89: 8" (20 cm) LCD, 6-digits In, cm, %, ft, M Non-volatile VDC (loop) 250Ω 24 VDC 4-20 ma, two-wire 4-20 ma or 20-4 ma Push button (3-button) 4 ma, 20 ma, 21 ma, 22 ma or hold last F: -4 to 140 C: -20 to 60 Automatic F: -40 to 160 C: -40 to psi (2 bar) NEMA 4X Aluminum Glass PVDF 2" NPT Dual, 1/2" NPT Viton RoHS Explosion proof FM: Class 1, Div 1, Groups A, B, C, D Class II/III, Div 1, Groups E, F, G 18 Tel: levelsolutions@flowline.com

19 Non-Contact Explosion Proof Measurement Transmitters CONFIGURATION DISPLAY SELECT / FAST Button TOP MENU UNITS TANK SAFE VALUES HELP RUN SELECT Display Units SELECT 4-20 Span SELECT Fail-Safety SELECT Diagnostics SELECT Help DIMENSIONS Inches Centimeters Percentage Display Height (4 ma) Fill H (20 ma) Reverse ma Help 22 ma 21 ma 20 ma 4 ma Hold Setup Diagnostics Reset Contact 4.44" (11.3 cm) 1/2" NPT 4.00" (10.2 cm) 6.06" (15.4 cm) 3.89" (9.9 cm) 6.06" 15.4 cm EchoSafe UP SELECT DOWN FAST 2" NPT EchoSafe Sensor range 8 7.5m (26.4') 9 10m (32.8') Process mount (1) 0 NPT (US) XP8-0 Ordering Notes 1) For installation on open tanks, order the LM (2" NPT) side mount bracket. LM Fax:

20 Transmitters EchoTouch IS Ultrasonic Transmitter TM APPLICATION CSA approved intrinsically safe for use in hazardous locations, the two-wire ultrasonic transmitter provides non-contact level measurement up to 18 or 5.4m, and is ideally suited for challenging corrosive, slurry or waste liquids. Push button calibrated, the transmitter is typically selected for atmospheric bulk storage, day tank and waste sump applications located within a classified area. Media examples include diesel fuel and sulfuric acid. FEATURES Intrinsically safe transmitter for use in hazardous environments LCD digital display indicates level in inches or centimeters EasyCal simple push button calibration for all user set points PP enclosure rated NEMA 4X with rugged PVDF transducer Adjustable dead band and range filters eliminate false echo returns LU IS USER FRIENDLY IP Configuration is fast and easy with our LCD display and EasyCal push button menu. Simply input your 4 and 20 ma set points and install. It's intrinsically safe level made simple! Faceplate SPECIFICATIONS Range: Accuracy: Resolution: Beam width: Dead band: Display type: Display units: Memory: Supply voltage: Loop resist.: Signal output: Signal invert: Calibration: Fail-safety: Process temp.: Temp. comp.: Ambient temp.: Pressure: Enclosure rating: Encl. material: Trans. material: Process mount: Mount. gasket: Conduit entrance: Classification: Approvals: Parameters: Certificates: CE compliance: MARKETS Oil & gas Pulp & paper Petrochemical Food & beverage Municipal wastewater Paint & coatings Power generation Transportation 6" to 18' (15 cm to 5.4m) 0.25% of span in air 0.125" (3 mm) 8 conical 6" (15 cm) LCD, 4-digit Inch or cm Non-volatile VDC VDC 4-20 ma, two-wire 4-20 or 20-4 ma Push button Reverts to safe state during echo-loss F: -4 to 140 C: -20 to 60 Automatic F: -40 to 140 C: -40 to psi (2 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 4X (IP) PP, UL94VO PVDF 2" NPT (2" G) Viton Single, 1/2" NPT Intrinsically safe CSA: Class I, Groups A, B, C & D; Class II, Groups E, F and G; Class III; T3C CSA: Vmax < 32.0 V; Imax < 130 ma; Ca = 0 F; La = 0 H CSA: LR EN EMC Biotech & pharmaceutical 20 Tel: levelsolutions@flowline.com

21 Non-Contact Intrinsically Safe Measurement Transmitters SAFETY BARRIER Complete your intrinsically safe level measurement package with an appropriate intrinsic safety barrier. The LB intrinsic safety barrier is CSA approved and matches the entity parameters of the LU IS ultrasonic transmitter. LB DIMENSIONS BEAM WIDTH Depth (Feet) Width (Inches) LM EchoTouch IS Process mount (1) (2) 0 2" NPT (US) 6 2" G (Metric) LU IS Ordering Notes 1) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 2) When used in hazardous environments, order the LB intrinsic safety barrier. Fax:

22 Transmitters FluidWell TM Explosion Proof Meter APPLICATION FEATURES Large 1 LCD main display with 5 ½ digits and secondary unit display Rugged XP enclosure with viewing window and dual conduit ports 45º pie graph indicates percentage of measured span Intuitive menu makes configuration fast and easy Non-volatile memory with security password lockout Linear and square root functions CSA approved explosion proof for use in hazardous applications, the loop powered field meter displays engineering units connected in series with one 4-20 ma transmitter. The meter is typically selected for use with an explosion proof transmitter within a hazardous area. The windowed field enclosure is wall mounted for convenient viewing. 6.25" (159 mm) 5.13" (130 mm) 6.25" (159 mm) 5.13" (130 mm) SPECIFICATIONS Display type: Display units: Decimal point: Display output: Display height: User interface: Sensor input: Loop power: Memory: Voltage drop: Ambient temp.: Enclosure rating: Enclosure mat'l.: Window mat l.: Conduit entrance: Compliance: Approvals: TECH TIP LCD, 5 1/2 digit Engineering 0, 1, 2 or to 99,999 Main: 1" (26 mm) Secondary: 0.3 (8 mm) Three push button (1) 4-20 ma transmitter VDC Non-volatile ma F: -40 to 176 C: -40 to 80 NEMA 4, 7 & 9 (IP) Aluminum Glass Dual, 3/4 NPT CE, UL EN61326, EN Explosion proof CSA: Class I, Groups C, D; Class II, Groups E, F, G; Class III; T-code = T4 For explosion proof level measurement and indication, package your meter with the EchoSafe XP ultrasonic transmitter. See pages for more information. It s level made simple. 5.13" (130 mm) 3/4" NPT Hole 6.34" (161 mm) FluidWell /16" 1.50" (38 mm) 22 Tel: levelsolutions@flowline.com

23 DataLoop Intrinsically Safe Meter TM Transmitters APPLICATION LI FEATURES Offered in intrinsically safe and general purpose configurations, the loop powered panel meter displays engineering units connected in series with one 4-20 ma transmitter. Select the LI meter for hazardous applications with an intrinsically safe level transmitter. Select the LI meter for general purpose applications. For field mount installations, order the single or two meter NEMA box. Offered in intrinsically safe and general purpose configurations Large 5 digit LCD main display with secondary unit and bar graph display Intuitive push button menu makes configuration fast and easy 1/8 DIN enclosure with NEMA 4X faceplate and shallow depth case Linear, square root and programmable exponent functions Non-volatile memory ensures program and set point retention Accessory NEMA 4X windowed enclosure for field installation 2.45" (62 mm) 3.61" (92 mm) 0.59" (15 mm) 1.76" (45 mm) 3.2" (81 mm) 3.6" (91 mm) 2.5" (64 mm) SPECIFICATIONS Display type: Display units: Decimal point: Display output: Display height: Backlight: User interface: Sensor input: Loop power: Memory: Voltage drop: Ambient temp.: Enclosure type: Enclosure rating: Enclosure mat'l: Classification: Approvals (LI25): TECH TIP For field mount installation in a rugged NEMA 4X, corrosion resistant PC windowed enclosure, order the LM92 single meter or the LM93 two meter box. Each comes with precut panels and mounting hardware. It's indication made simple. LCD, 5-digit Engineering Floating to " (15 mm) LED, bright orange Four push button (1) 4-20 ma transmitter VDC Non-volatile 2.0 VDC w/o backlight 5.7 VDC w/backlight F: -22 to 149 C: -30 to 1/8 DIN, panel mount NEMA 4X (IP) faceplate Polycarbonate LI : Intrinsically safe LI : General purpose FM, CSA: Class I, Div I, Groups A, B, C, D; Class II, Div I, Groups E, F, G; Class III, Div I; Class I, Zone 0, Group IIC; T-code = T4 LM DataLoop Configuration (1) 2 Intrinsically safe 1 General purpose 4.68" (119 mm) LI LM Ordering Notes 1) For field mount installation in a NEMA 4X polycarbonate windowed enclosure, order the LM (single meter box) or the LM (two meter box). IP Fax:

24 Transmitters EchoSpan GP Ultrasonic Transmitter TM Faceplate APPLICATION The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8 or 10m, and is ideally suited for challenging ultrapure, corrosive or waste liquids. Push button calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include wastewater and sodium hydroxide. IP FEATURES Rear View Setup is fast and easy with our simple push button menu and LCD display Offered in three measurement ranges up to 10m with 2 transducer Narrow 3" minimum beam width for applications with restricted space PC/ABS enclosure rated NEMA 4X with rugged PVDF transducer Fail-safe intelligence with diagnostic feedback for easy troubleshooting SPECIFICATIONS Range: Accuracy: Resolution: Beam width: Dead band: Display type: Display units: Memory: Supply voltage: Loop resist.: Signal output: Signal invert: Calibration: Fail-safety: Process temp.: Temp. comp.: Ambient temp.: Pressure: Enclosure rating: Enclosure vent: Encl. material: Trans. material: Process mount: Mount. gasket: Conduit entrance: Classification: Compliance: LU81: 8" to 16.4' (10 cm to 5m) LU83: 8" to 26.2' (20 cm to 8m) LU84: 12" to 32.8' (30 cm to 10m) 0.2% of span in air LU81/83: 0.039" (1 mm) LU84: 0.078" (2 mm) 3" (7.6 cm) dia. LU81: 8" (20 cm) LU83: 8" (20 cm) LU84: 12" (30 cm) LCD, 6-digit Inch, cm or percent Non-volatile VDC VDC 4-20 ma, two-wire 4-20 ma or 20-4 ma Push button Selectable 4mA, 20mA, 21 ma, 22 ma or hold F: -4 to 140 C: -20 to 60 Automatic F: -40 to 160 C: -40 to psi (2 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 4X (IP) Water tight membrane PC/ABS FR PVDF 2" NPT (2" G) Viton Dual, 1/2" NPT General purpose CE: EN61326, EMC USER FRIENDLY Configuration is fast and simple with our scrolling single layer menu, 3-button interface and 6-segment LCD display. Troubleshooting is always easy with our powerful setup and diagnostic modes. Setup displays the transmitter s calibration set points and diagnostics provides users with a snapshot of sensor performance in the installed application. 24 Tel: levelsolutions@flowline.com

25 Non-Contact Measurement with Display Transmitters CONFIGURATION DISPLAY SELECT / FAST Button TOP MENU UNITS TANK SAFE TGCAL VALUES HELP RUN SELECT Display Units Inches Centimeters Percentage Display SELECT 4-20 Span Height (4 ma) Fill H (20 ma) Reverse ma Help SELECT Fail-Safety 22 ma 21 ma 20 ma 4 ma Hold SELECT Target-Cal Full Empty Help SELECT Diagnostics Setup Diagnostics Reset SELECT Help Contact DIMENSIONS Rear View Top View Side View EchoSpan Sensor range 81 5m (16.4') 83 8m (26.2') 84 10m (32.8') Process mount (1) (2) 0 NPT (US) 6 G (Metric) LU Fax: LM Ordering Notes 1) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 2) For a liquid tight cable connection, order the LM connector. 25

26 Transmitters EchoSonic II GP Ultrasonic Transmitter SPECIFICATIONS LU28-01 APPLICATION The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8 or 10m, and is well suited for challenging ultrapure, corrosive, slurry or waste liquids. The transmitter is broadly selected for atmospheric bulk storage, mini-bulk, day tank, waste sump, process applications. Media examples include acetic acid and cooking oil. To configure EchoSonic, download our free WebCal software and purchase one USB interface tool. DIMENSIONS LU27-01 FEATURES LU28/29 Side View Compact sensor offered in 3 measurement ranges up to 32.8' (10 m) Spanned via WebCal PC software and Fob USB adapter 2" beam width and 2" dead band for applications with limited space Polycarbonate enclosure rated 6P with rugged PVDF transducer and PP cable for corrosive environments Range: Accuracy: Resolution: Beam width: Dead band: Memory: Supply voltage: Consumption: Loop resist.: Signal output: Signal invert: Configuration: Fail-safety: Process temp.: Temp. comp.: Ambient temp.: Pressure: Enclosure rating: Encl. material: Trans. material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Classification: Compliance: Approvals: LU27: 4" to 8.2' (10 cm to 2.5 m) LU28: 8" to 24.6' (20 cm to 7.5 m) LU29: 8" to 32.8' (20 cm to 10 m) ± 0.2% Range LU27: (0.5mm) LU28/29: 0.079" (2 mm) LU27: 2" (5 cm) dia. LU28/29: 3" (7.6 cm) dia. LU27: 4" (10 cm) LU28/29: 8" (20 cm) Non-volatile 24 VDC 0.5W 500Ω 24 VDC 4-20 ma, two-wire 4-20 ma or 20-4 ma WebCal PC Windows USB ma, 20 ma, 21 ma, 22 ma or hold last F: -4 to 140 C: -20 to 60 Automatic F: -31 to 140 C: -35 to 60 MWP = 30 PSI Type 6P, encapsulated, corrosion resistant & submersible Polycarbonate PVDF Polyurethane 4-cond., shielded 10' (3m) LU27: 1" NPT (1" G) LU28/29: 2" NPT (2" G) Viton General purpose RoHS cfmus, CE LU27 Side View 26 Tel: levelsolutions@flowline.com

27 Non-Contact Measurement with WebCal Transmitters WEBCAL SOFTWARE Our powerful WebCal software makes EchoSonic configuration fast and easy. Take control of your level process with WebCal's intuitive interface, pre-programmed menus, tank set point graphics and custom wiring diagrams. To configure EchoSonic II, simply create or open a saved configuration file, click "Write to Unit", print or the PDF wiring diagram and install. To get more information and download your free copy, go to EASY CONFIGURATION Easy configurations with pull down menu selection Graphic interface lets you visualize your configuration Applicable span set point fields appear automatically Installs and tests configuration in less than a second Available PDF wiring diagram for each configuration Technical help menu with FAQ's, tips and glossary Rapidly program sensors to the same configuration DOCUMENT CONTROL Save configuration files for future use or reference Print wiring diagrams and configuration text files configuration files to other remote users RoHS Compliant EchoSonic II Sensor range / size (1) (2) m (8.2') m (24.6') m (32.8') Process mount (3) 0 NPT (US) 1 G (Metric) LU - 1 LI Ordering Notes 1) One Fob USB interface tool (LI ) and WebCal are required to configure EchoSonic II. Fobs are universal and one FOB can configure multiple transmitters. 2) WebCal is a free download from our (Windows XP compatible). 3) For installation on open tanks, order the LM (1" NPT) or LM (1" G) side mount bracket; or order the LM (2" NPT) or LM (2" G) bracket. Fax:

28 Transmitters APPLICATION The general purpose three-wire ultrasonic transmitter provides non-contact level measurement up to 24 or 7.4m with an internal relay that can be configured as a single-point alarm or latched on two points for automatic fill or empty control. The transmitter is ideally suited for challenging corrosive, slurry or waste liquids and is typically selected for atmospheric bulk storage and waste sump applications. Media examples include wastewater and resin. FEATURES Integral relay for alarm or automatic fill-empty control LED digital display indicates level in inches or centimeters EasyCal simple push button calibration for all user set points PP enclosure rated NEMA 4X with rugged PVDF transducer EchoTouch TM GP 3-Wire Ultrasonic Transmitter LU EchoTouch Three-Wire Ultrasonic Level Transmitter LU30 Series SPECIFICATIONS Range: Accuracy: Resolution: Beam width: Dead band: Display type: Display units: Memory: Supply voltage: Consumption: Current flow: Signal output: Signal invert: Calibration: Contact type: Contact rating: Contact logic: Contact fail-safety: LED indication: Process temp.: Temp. comp.: Ambient temp.: Pressure: Enclosure rating: Encl. material: Trans. material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Conduit entrance: Classification: CE compliance: 6" to 24.5' (15 cm to 7.4m) 0.25% of span in air 0.125" (3 mm) 8 conical 6" (15 cm) LED, 4-digit Inch or cm Non-volatile VDC 200 ma max. Source / sink 4-20 ma, three-wire 4-20 or 20-4 ma Push button (1) SPDT relay, latching A Single point: alarm Two point: latching Reverts to safe state during echo-loss Relay status F: -20 to 140 C: -4 to 60 Automatic F: -40 to 140 C: -40 to psi (2 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 4X (IP) PP, UL94VO PVDF Vinyl Pow./signal: 3-conductor Relay: 3-conductor 9 (22 cm) 2" NPT (2" G) Viton Single, 1/2" NPT General purpose EN EMC EN safety EchoTouch Process mount 0 NPT / ANSI (US) 6 G / DIN (Metric) Signal output (1) (2) ma, sourcing ma, sinking 9" Cable (22 cm) LU30-50 Ordering Notes 1) The sourcing transmitter provides internal excitation for use with sinking devices. The sinking transmitter requires external excitation for use with sourcing devices. 2) For three wire transmitter power, order the LC ( VAC) power supply (24 0.6A). IP 28 Tel: levelsolutions@flowline.com

29 FloaTek GP Float Transmitter TM Transmitters APPLICATION The general purpose two-wire, float transmitter provides contact level measurement up to 8 or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids. The transmitter is typically selected for high temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil. FEATURES Ideal level measurement solution for high temperature and pressure Rugged 316 stainless steel float, guide and 2 NPT mounting plug Compatible with Flowline remote indicator and relay controllers Custom assembled to your exact guide length and span dimensions PP junction box rated NEMA 4X with 1/2" conduit connector and removable terminal strip Junction Box IP LV55-S001 SPECIFICATIONS Range: Accuracy: Specific gravity: Orientation: Supply voltage: Loop resist.: Signal output: Calibration: Process temp.: Pressure: Enclosure rating: Encl. material: Guide & float mat.: Process mount: Conduit entrance: Classification: Compliance: TECH TIP 6" to 96" (15.2 cm to 2.4m) 0.25" over span in water 0.55 minimum 30 from vertical 10 to 30 VDC VDC 4-20 ma, two-wire None, fixed span F: -40 to 185 C: -40 to psi (13.8 bar) NEMA 4X (IP) PP, UL94VO 316 SS 2" NPT Single, 1/2" NPT General purpose CE For level indication and control, package your float transmitter with the DataView single-channel meter. The bright two-line LED display, loop power supply, optional relays and 4-20 ma repeater make it a fantastic general purpose meter. Its level indication and control made simple. FloaTek Dimensions (1) (2) A Specify 16 (41cm) 24 (61cm) 32 (81cm) 36 (91cm) 42 (107cm) 48 (122cm) LV55-S001- LM Ordering Notes 1) Specify the A-dimension at the end of the part number. FloaTek is inventoried in standard lengths. Custom lengths may be specified The A-dimension may be specified in 1/2" (1.3 cm) increments from 12" to 96"(30 cm to 2.4m). The 20 ma set point will be placed 0.75 (19 mm) below the mounting threads. The 4 ma set point will be placed 1.9 (48 mm) above the guide stop. The space above and below these set points are dead zones. 2) To calculate the guide adder, round up the A-dimension to the next inch (2.5 cm) and multiply it times the length adder. Fax:

30 Transmitters DeltaSpan External Pressure Transmitter TM The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69' or 21.1m of water column. Select the -S_01 for cable termination or the -S_11 for conduit termination with an integral junction box. The transmitter is best applied with clean liquid or gas media including water, oil and air. Application examples include irrigation equipment, pumping systems and compressors. APPLICATION FEATURES Corrosion resistant 316 SS transducer with cable or junction box termination Small, rugged transducer is ideal for fluid handling equipment -S_11 Top View LD30-S001 SPECIFICATIONS Range: Accuracy: Supply voltage: Max. loop resist.: Signal output: Calibration: Process temp.: Temp. comp.: Proof pressure: Burst pressure: Process mount: Enclosure rating: Probe material: Termination: Cable material: Cable type: Classification: CE compliance: -S0_1: 0 to 5 psi (0.34 bar) 0 to 11' (0 to 3.4m) wc -S2_1: 0 to 15 psi (1 bar) 0 to 34' (0 to 10.4m) wc -S4_1: 0 to 30 psi (2 bar) 0 to 69' (0 to 21.1m) wc 0.25% of full span VDC VDC 4-20 ma, two-wire None, fixed span F: 0 to 200 C: -18 to 93 Automatic 2 x full span > 35 x full span 1/4 NPT NEMA 4X (IP) 316 SS & 316L SS -S_01: 3 (1m) cable -S_11: Junction box with 1/2 NPT conduit connector Polyurethane 2-conductor, shielded General purpose CE: EN55022, EN55024, EN S_11 Side View DeltaSpan Sensor range 0 0 to 5 psi (0 to 0.34 bar) 2 0 to 15 psi (0 to 1 bar) 4 0 to 30 psi (0 to 2 bar) Termination package (1) 0 Cable 1 Conduit Junction Box LD30-S 1 -S_01 LD30-S011 Ordering Notes 1) To special order a 9 (2.7m) sensor cable (-S_01 only), place the cable length at the end of the part number (ie: LD30-S201-9 ). 30 Tel: levelsolutions@flowline.com

31 DeltaSpan Submersible Pressure Transmitter TM Transmitters APPLICATION The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46' or 14m of water column. Select the LD31 for clean or relatively clean water, light weight oils and diluted chemical media. Application examples include ground water, ponds and wells. Select the LD32 for dirty, sludge or slurry media. Application examples include sewer or storm pump lift stations, storage and treatment with surface foam or debris where ultrasonic cannot be applied. FEATURES Corrosion resistant 316 SS transducer with polyurethane or ETFE cable jacket 270 pound tensile strength cable, maintenance free breather tube and vent filter LD31-S001 Rugged LD32 model features large clog and damage resistant diaphragm design LD32-S001 SPECIFICATIONS Range: Accuracy: Supply voltage: Max. loop resist.: Signal output: Calibration: Process temp.: Temp. comp.: Proof pressure: Burst pressure: Process mount: Enclosure rating: Probe material: Cable material: Cable type: Classification: -S_01: 0 to 5 psi (0.34 bar) 0 to 11' (0 to 3.4m) wc -S_11: 0 to 10 psi (0.69 bar) 0 to 23' (0 to 7m) wc -S_21: 0 to 15 psi (1.0 bar) 0 to 34' (0 to 10.4m) wc -S_31: 0 to 20 psi (1.38 bar) 0 to 46' (0 to 14m) wc 0.25% of full span VDC VDC 4-20 ma, two-wire None, fixed span F: 0 to 200 C: -18 to 93 Automatic 2 x full span > 35 x full span 1/2 NPT NEMA 6 (IP67) LD31: 316 SS, 316L SS & Buna-N w/pvc nose LD32: 316 SS, 316L SS & Buna-N S1_1: Polyurethane S2_1: ETFE 2-conductor, shielded w/vent tube General purpose LD32 DeltaSpan Liquid type(1) 1 Water & light oil 2 Wastewater & slurry Cable jacket 1 Polyurethane 2 ETFE Sensor range 0 0 to 5 psi (0 to 0.34 bar) 1 0 to 10 psi (0 to.69 bar) 2 0 to 15 psi (0 to 1.0 bar) 3 0 to 20 psi (0 to 1.38 bar) LD31 Shld Vent (Clear) Black (-) Red (+) LD3 -S 1 LD Ordering Notes 1) For integral conduit termination and process mount, order the LD (2" NPT) or LD (1 1/2" G) installation kit. Each kit includes a PP junction box rated NEMA 4X, PP plug fitting and nylon cable connector. Fax:

32 Transmitters DataView Single-Channel Meter with Relays TM APPLICATION The general purpose meter displays engineering units with one 4-20 ma or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 ma repeater. Each relay can be configured on a single set point or latched on two set points for automatic fill or empty control including duplexing. For field mount installations, order the single or two meter NEMA box. 2.45" (62 mm) 0.59" (15 mm) 1.76" (45 mm) DataView 3.2" (81 mm) 3.6" (91 mm) 3.61" (92 mm) FEATURES LI Bright 6-digit LED main display and secondary unit display with relay status indicators 1/8 DIN enclosure with NEMA 4X faceplate and shallow depth case 32-point linearization function for volumetric tank measurement Non-volatile memory with security password protected lock out Isolated 4-20 ma repeater output with 40 ma internal power supply 4.68" (119 mm) 2.5" (64 mm) SPECIFICATIONS Display type: Display units: Decimal point: Display output: Display height: LED indication: User interface: Linearization: Memory: Sensor input: Supply voltage: Consumption: Sensor supply: Repeater ouput: Contact type: Contact rating: Ambient temp.: Enclosure type: Enclosure rating: Enclosure mat l: Compliance: Classification: Approvals: TECH TIP LED, 6-digit Engineering Floating to Main: 0.6 (15 mm) high Second: 0.46 (12 mm) high Relay status Four push button 2-32 point function Non-volatile (1) 4-20 ma or 0-10 VDC transmitter Hz. 20 watts max. 24 VDC +/- 200 ma 4-20 ma, 24 VDC +/- 40 ma 12_1: (2) SPDT (Form C) 14_1: (4) SPDT (Form C) 30 VDC or 250 VAC resistive load F: -40 to 149 C: -40 to 1/8 DIN panel meter NEMA 4X (IP) faceplate Polycarbonate CE: EN :2001 General purpose culus, UL508 For field mount installation in a rugged NEMA 4X, corrosion resistant PC windowed enclosure, order the LM92 single meter or the LM93 two meter box. Each comes with precut panels and mounting hardware. It's indication and control made simple. LM Configuration (1) 0 Meter only 2 Meter with 2 relays 4 Meter with 4 relays Repeater output 0 No repeater ma repeater LI Ordering Notes 1) For field mount installation in a NEMA 4X polycarbonate windowed enclosure, order the LM (single meter box) or the LM (two meter box). IP 32 Tel: levelsolutions@flowline.com

33 Commander Multi-Channel Relay Controller TM Transmitters SPECIFICATIONS FEATURES Multi-channel controller with 4 input channels and 6 relay outputs 3 run mode configurations; multi-tank, pump control and differential level Backlit graphic LCD display provides excellent process visualization 1/4 DIN enclosure with NEMA 4X faceplate and 35 mm rail mount Simulation mode for easy configuration testing and troubleshooting Compatible with removable MicroSD mass storage cards for data-logging LC Commander APPLICATION LI The general purpose controller has a graphic display with four 4-20 ma transmitter input channels and 6 programmable relays. Select from one of three run mode configurations including; 1) Multi-tank with 4 inputs and 4 relays; or 2) Pump control with 1 input and 6 relays for lift stations including duplexing; or 3) Differential level with 2 inputs and 4 relays for municipal screen or rake control. Each relay can be configured on a single set point or latched on two set points for automatic fill or empty control. The LCD displays engineering units, relay and span status for each channel. The MicroSD card is ideal for data-logging storage and retrieval. TECH TIP Package the Commander with our external power supply rated A. The rail mount power supply can support all transmitters used with the controller.. Display type: Display pixels: Display units: Decimal point: Display output: User interface: Linearization: Logic scan rate: Internal memory: Remove. memory: Sensor inputs: Supply voltage: Contact type: Contact rating: Ambient temp.: Enclosure type: Enclosure rating: Enclosure mat l.: Compliance: Classification: Approvals: Graphic LCD, backlit 128 x 64 Engineering Floating Num., text & graphics 20 push button Volumetric, selectable tank shapes 1.2 ms/k 256KB, non-volatile MicroSD (128MB-1G) card compatible (1-4) 4-20 ma A (6) SPDT (Form C) 30 VDC or 250 VAC resistive load F: 32 to 122 C: 0 to 50 1/4 DIN panel meter with 35 mm DIN rail NEMA 4X (IP) faceplate Polycarbonate CE: EN :1999 General purpose culus, UL508 MicroSD Card LI (1), (2) Ordering Notes 1) Optional MicroSD cards can be purchased separately from electronic retailers. 2) For external loop power, order the LC ( VAC) power supply (24 0.6A). Fax:

34 Level Switches Introduction to Level Switch & Control INTRODUCTION Flowline offers the most advanced family of level switch automation and safety solutions for your bulk storage, day tank, process vessel and waste sump applications. Automation and Safety Ultrasonic Offered in PP and PFA with a 1A 60VA relay, the intrinsically safe ultrasonic switch is applied in hazardous media including solvent, chemical, hydrocarbon and petroleum. Vibration Offered in Ryton with a 1A 60VA relay, the general purpose vibration switch is ideal for challenging coating, scaling and foaming media such as wastewater and brine. Buoyancy Offered in PP, PVDF and stainless steel with a dry contact closure, the general purpose float switches are ideal for basic water, chemical and light oil applications. Optic Offered in PP and PFA with a 1A 60VA relay, the general purpose optic switch is widely applied in secondary containment leak detection of chemical and wastewater. Capacitance Offered in both intrusive and non-intrusive configurations with a 1A 60VA relay, the general purpose capacitance switches are best for ultrapure water and acid. APPLICATIONS High and Low Alarms Tank spill prevention Regulatory compliance Pump run dry protection Low-level inventory control Process and employee safety Automatic Fill or Empty Pump lift stations Chemical day tanks Skid or process vessels Leak Detection Alarms Secondary containment 34 Tel: levelsolutions@flowline.com

35 Level Switches LEVEL SWITCH PACKAGES Package EchoSwitch II Smart Trak Smart Trak Float-Point Switch-Pak Switch-Pak Switch-Pro Switch-Pro Series LU7_ A_23 A _ AV_6 A_13 A_1_ A_13 A_1_ Range 1-7.5m 3m 3m 2m 3m 3m N/A N/A Class GP GP GP/IS GP GP GP/IS GP GP/IS Supply AC AC DC DC AC DC AC DC Output (3) 60VA, 1A (1) 16A (1-4) 60VA (1-4) Reed (1) 16A (1) 60VA (1) 16A (1) 60VA Temp. 60 C 80 C 80 C 200 C 80 C 80 C 80 C 80 C Press. 2 bar Atm Atm 13.8 bar 10 bar 10 bar 10 bar 10 bar Material PVDF PP PP 316 ss PP/PVDF PP/PVDF PP/PFA PP/PFA Contact No Yes Yes Yes Yes Yes Yes Yes Page LEVEL SWITCHES Switch Ultrasonic Vibration Buoyancy Optic RF-Cap RF-Cap Float Float Float Series LU10 LZ12 LV10 LO10 LP15 LP50 LV20 L_2_ L_3_ Class IS GP GP GP GP GP GP GP GP Output 60VA 60VA 15VA 60VA 60VA 60VA 15VA 30VA 30VA Media Acid/Solvent Wastewater Acid/Water Leak Wastewater RO Water Water Water Various Temp. 80 C 80 C 80 C 80 C 80 C 80 C 80 C 200 C 200 C Press. 10 bar 10 bar 2 bar 10 bar 10 bar Atm 1.7 bar 20 bar 34 bar Material PP/PFA Ryton PP/PVDF PP/PFA PP PE PP/PVDF 316 ss 316 ss Page CONTROLLERS Control Compact Remote Strobe Junction Series LC1_ LC LC LC0_ Inputs Output (1) 16A (2) 10A N/A N/A Mount Field Panel Field Field Supply AC AC AC/DC N/A Page Fax:

36 Level Switches EchoSwitch II Bulk Tank Ultrasonic Switch SPECIFICATIONS Faceplate APPLICATION The general purpose ultrasonic switch and controller provides non-contact level detection up to 24.6 or 7.5 m with 3 SPDT 60 VA 1A relays. EchoSwitch II features an LCD display with digital push button configuration. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex control modes with an integral timer delay. The switch is well suited for a broad range of corrosive, waste and slurry type media. EchoSwitch II is broadly selected for atmospheric day tank, pump lift station and sump applications. FEATURES LU LU Non-contact level detection with integral 3-channel relay control LCD display with simple digital push button configuration Pump simplex, duplex and triplex control modes Integral timer for pump or valve delay and alternation Available in 2.5 m (8.2') and 7.5m (24.6') ranges 10cm dead band optimizes the filling capacity of small sumps Corrosion resistant polycarbonate enclosure with PVDF transducer Range: Repeatability: Effective Beam width: Dead band: LCD indication: Configuration: Supply voltage: Contact type: Contact rating: Contact fail-safety: Process temp.: Temp. comp.: Ambient temp.: Pressure: Enclosure rating: Enclosure vent: Encl. material: Encl: hardware: Trans. material: Process mount: Mount. gasket: Conduit entrance: Classification: Compliance: RoHS Compliant LU77: 4" to 8.2' (10 cm to 2.5m) LU78: 8" to 24.6' (20 cm to 7.5m) 0.25" (6.35 mm) 3" (7.6 cm) dia. LU77: 4 (10 cm) LU78: 8 (20 cm) Level and relay status Push button VAC (3) SPDT relays 60 VA, 1A max Programmable / selectable F: -4 to 140 C: -20 to 60 Automatic F: -4 to 140 C: -20 to 60 MWP = 30 PSI NEMA 4X (IP) Water tight membrane Polycarbonate, UV Brass and stainless PVDF 1 NPT (1 G) 2 NPT (2 G) Viton Dual, 1/2 NPT General purpose CE (pending), RoHS IP AUTOMATION The integral three channel controller has powerful automation features including advanced pump and alarm control logic designed for day tank, process vessel and waste sump applications. From alarms to automatic fill or empty, pump duplexing and run dry protection, EchoSwitch II does it all. It's level made simple. 36 Tel: levelsolutions@flowline.com

37 Non-Contact Multi-Point Level Controller Level Switches CONFIGURATION DISPLAY SELECT / FAST Button TOP MENU UNITS TANK RELAY# SAFE MPLEX HELP RUN SELECT Display Units SELECT 4-20 Span SELECT Relay Action SELECT Safe Mode SELECT Multi-Plexing SELECT Settings Inches Feet Centimeters Meters Percent Height (4 ma) Fill H (20 ma) Pump Valve Alarm R1 (Relay 1) R2 (Relay 2) R3 (Relay 3) No-Alt Duplex A-Time Setup Reset Sim-T Test P DIMENSIONS LU78-50_5 Side View LU77-50_5 Side View 5.2" (133 mm) 3.9" (100 mm) 2.4" (62 mm) 1.9" (49 mm) 1.25" (32 mm) 1" NPT (1" G) Sensor range (1) (2.5 m) (7.5 m) Process mount 0 2 NPT (US) 6 2 G (metric) LU LM reducer bushing is included with the LM Ordering Notes 1) For installation on open tanks, order the LM (1" NPT), LM (1" G) LM (2" NPT) or LM (2" G) side mount bracket. LM Fax:

38 Level Switches Smart Trak with Compact Relay Controller TM APPLICATION This general purpose switch package provides a complete solution for automatic filling or emptying of a tank between two adjustable level switch points with a 16A latching compact relay controller for pump or valve actuation. The product is typically selected for atmospheric day tank, process vessel and waste sump applications. Specify the appropriate sensor technology and assembly dimensions. FEATURES Fail-safe relay control of pumps and valves with 0-60 second time delay Offered in 3 sensing technologies for broad application coverage Easy setup with LED indicators for sensor, power and relay status Rugged PP construction for use in challenging corrosive environments Adjustable level switches make field adjustment fast and simple AV SPECIFICATIONS Length: Switch points: Orientation: Supply voltage: Strobe type: Strobe flash: Contact type: Contact rating: Contact latch: Contact delay: LED indication: Process temp.: Electronics temp.: Pressure: Wetted material: Process mount: Enclosure rating: Encl. material: Conduit entrance: Classification: CE compliance: 8" to 10' (20 cm to 3m) 2 (field adjustable) 30 vertical 120/ Hz. 431_: N/a 432_: Xenon tube 431_: N/a 432_: 1 per second (1) SPDT relay, latching A Selectable ON/OFF 0-60 seconds Power, relay and sensor status F: -40 to 176 C: -40 to 80 F: -40 to 140 C: -40 to 60 Atmospheric PP (20% glass fill) 2" NPT (2" G) NEMA 4X (IP) PP, UL94VO Single, 1/2" NPT General purpose EN EMC EN safety RELAY CONTROL The AC powered relay controller has a latching 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant PP and features a 300 swivel base for easy conduit alignment. Controller 38 Tel: levelsolutions@flowline.com

39 Adjustable Automatic Fill or Empty Control Level Switches SENSORS Vibration Typically applied in wastewater Broadly applied in chemical, media with light coating and/or foaming characteristics Ultrasonic solvent, hydrocarbon and light weight oil media Buoyancy Best applied in clean water or water-like chemical media that is non-coating or scaling DIMENSIONS AV23 IP Smart Trak A Sensor technology (1) Z Vibration U Ultrasonic V Buoyancy Configuration (2) (3) 1 Controller only 2 Controller with Strobe Alert Process mount (4) (5) 3 2" NPT (US) 7 2" G (Metric) Dimensions (6) (7) (8) (9) A Specify B Specify C Specify STROBE ALERT The controller with Strobe Alert configuration flashes when the relay is energized to bring attention to process conditions such as the automatic emptying of waste into treatment. Strobe Ordering Notes 1) Select the best sensor technology based upon your application. 2) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: AU "-76"-17"-E). 3) To order the CE configuration, place CE at the end of the P/N: (ie: AU "-76"-17"-CE). 4) The straight G thread version seals with an included Viton mounting gasket. 5) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 6) Specify the A, B and C dimensions at the end of the part number (ie: AZ "-76"-17"). The dimensions may be specified in 1/2" (1.3 cm) increments. 7) The track length or A-dimension may be specified from 8" to 10' (20 cm to 3m). The sensor or B and C dimensions may be specified from 4" to 10' (10 cm to 3m). 8) For maximum field adjustability, specify all sensor dimensions equal to the A-dimension. 9) To calculate the track adder, round up the A-dimension to the next foot (30 cm). Fax:

40 Level Switches Smart Trak TM with Compact Junction Box APPLICATION Offered in CSA approved intrinsically safe or general purpose configurations, this switch package provides up to four adjustable level switch points with a 60VA relay or dry contact closure interface for remote devices such as a PLC, SCADA or alarm. The product is typically selected for atmospheric day tank, process vessel and waste sump applications. Specify the appropriate sensor technology and assembly dimensions. FEATURES Corrosive multi-point level detection with contacts for PLC or control input Offered in 3 sensing technologies for broad application coverage Rugged PP construction for use in challenging corrosive environments Adjustable level switches make field adjustment fast and simple PP junction box with swivel base SENSORS Vibration Typically applied in wastewater media with light coating and/or foaming characteristics General purpose classification only Ultrasonic Broadly applied in chemical, solvent, hydrocarbon and light weight oil media Intrinsically safe classification Buoyancy Best applied in clean water or water-like chemical media that is non-coating or scaling General purpose classification only AU SPECIFICATIONS Length: Junction Box Switch points: Orientation: Process temp.: Pressure: Wetted material: Process mount: Enclosure rating: Installed height: Encl. material: Conduit entrance: Termination: CE compliance: Ultrasonic sensor Supply voltage: Consumption: Contact type: Contact rating: Contact output: Classification: Vibration sensor Supply voltage: VDC Consumption: 25 ma maximum Contact type: (1) SPST relay Contact rating: 60 VA Contact output: Selectable NO/NC Classification: General purpose Buoyancy sensor Contact type: Contact rating: Contact output: Classification: TECH TIP 8" to 10' (20 cm to 3m) 1 to 4 (field adjustable) 30 vertical F: -40 to 176 C: -40 to 80 Atmospheric PP (20% glass fill) 2" NPT (2" G) NEMA 4X (IP) 5.7" (14.4 cm) above tank process mount PP, UL94VO Single, 1/2" NPT 12 poles EN EMC EN safety VDC 25 ma maximum (1) SPST relay GP: 60 VA IS: A Selectable NO/NC Intrinsically safe (1) SPDT reed 15 VA Selectable NO/NC General purpose The compact junction box is constructed of UL approved fire retardant PP and comes pre-wired with a 12-pole terminal strip. It s level made simple! 40 Tel: levelsolutions@flowline.com

41 Adjustable Multi-Point Level Detection Level Switches DIMENSIONS AU E (Specify) B (Specify) 2.8" (71mm) 4.2"(106mm) 5.7"(145mm) 2" NPT (2" G) D (Specify) C (Specify) A (Specify) IP Smart Trak A Sensor technology (1) Z Vibration U Ultrasonic V Buoyancy Number of sensors (2) 1 One sensor 2 Two sensors 3 Three sensors 4 Four sensors Contacts / classification (3) 5 SPST relay / IS 6 SPDT reed / GP 8 SPST relay / GP Process mount 3 2" NPT (US) 7 2" G (Metric) Dimensions (4) (5) (6) (7) (8) A Specify B Specify C Specify (if applicable) D Specify (if applicable) E Specify (if applicable) RELAY CONTROL For process automation, package your switch assembly with our remote relay controllers. See page 59 for more details. LM LC Ordering Notes 1) Select the best sensor technology based upon your application. 2) Multiply the number of sensors by the selected sensor technology adder. 3) The following are the available contacts for each sensor technology: Ultrasonic: 5 type only Vibration: 8 type only Buoyancy: 6 type only 4) Specify the applicable A, B, C, D, and E dimensions at the end of the part number based upon the number of sensors in your assembly (ie: AZ "-76"-17"): 1-sensor: Specify A and B 2-sensors: Specify A, B and C 3-sensors: Specify A, B, C and D 4-sensors: Specify A, B, C, D and E 5) The dimensions may be specified in 1/2" (1.3 cm) increments. 6) The track length or A-dimension may be specified from 8" to 10' (20 cm to 3m). The sensor or B, C, D, and E dimensions may be specified from 4" to 10' (10 cm to 3m). 7) For maximum field adjustability, specify all sensor dimensions equal to the A-dimension. 8) To calculate the track adder, round the A-dimension to the next foot (30 cm). Fax:

42 Level Switches Float-Point TM with Compact Junction Box APPLICATION The general purpose switch package provides up to five level switch points with a dry contact closure interface for remote devices such as a PLC or SCADA. The product is typically selected for high temperature or pressure process vessel applications. Media examples include boiler water and glycol. Specify the appropriate assembly dimensions. FEATURES High temp-pressure multi-point level detection with contacts for PLC input Rugged 316 stainless steel float, guide and 2 NPT mounting plug Compatible with Flowline remote relay controllers and alarms PP enclosure rated NEMA 4X with 300º swivel base Custom assembled to your exact guide length and float dimensions TECH TIP The compact junction box is constructed of UL approved fire retardant PP and comes pre-wired with a 12-pole terminal strip. It s level made simple! AV26-S243 SPECIFICATIONS Length: Switch points: Accuracy: Repeatability: Specific gravity: Orientation: Contact type: Contact rating: Process temp.: Pressure: Guide/float mat.: Process mount: Enclosure rating: Encl. material: Conduit entrance: Termination: Classification: Approvals: Compliance: 4" to 8 (10 cm to 2.4m) 1 to 5 (set by factory) 3 mm in water 1 mm in water 0.55 minimum 30 vertical (1-5) SPDT reed VA F: -40 to 392 C: -40 to psi max. (13.8 bar max.) 316 ss 2" NPT NEMA 4X (IP) PP, UL94VO Single, 1/2" NPT 12 poles General purpose UL CE: EN , EN GALLON DRUM TIP Offered with compact or remote displays, the 316 SS float monitor provides simple level monitoring of 55-gallon drums. The battery powered LED display and switch are available in high alarm, low alarm or high & low alarm configurations. The remote display includes 72 (183cm) cable. The AV17 is drum level made simple. AV17-S301 Remote AV17-S401 Compact AV_6-S243 Junction Box with LM Liquid Tight Fitting 42 Tel: levelsolutions@flowline.com

43 High Temperature Multi-Point Level Detection Level Switches RELAY CONTROL For process automation with pumps, valves and alarms, package your level switch assembly with our remote relay controllers offered in a 35 mm DIN package. See page 59 for more details. SIDE MOUNT Order the LM50 side mount bracket for easy installation on open tanks. The adjustable polypropylene bracket bolts to the tank side wall or structural apparatus. LM LC DIMENSIONS AV46 Float-Point AV 6-S Number of floats 1 One float 2 Two floats 3 Three floats 4 Four floats 5 Five floats Dimensions (1) (2) (3) (4) A Specify B Specify C Specify (if applicable) D Specify (if applicable) E Specify (if applicable) F Specify (if applicable) Compact Drum Alarm Remote Drum Alarm 1 High alarm 4 High alarm 2 Low alarm 5 Low alarm 3 High & low alarm 6 High & low alarm AV17-S 01 IP Ordering Notes 1) Specify the applicable A, B, C, D, E and F dimensions at the end of the part number based upon the number of floats in your assembly (ie: AV26-S443-70"-68"-10"): 1-float: Specify A and B 2-floats: Specify A, B and C 3-floats: Specify A, B, C and D 4-floats: Specify A, B, C, D and E 5-floats: Specify A, B, C, D, E and F 2) The dimensions may be specified in 1/2" (1.3 cm) increments. 3) The guide length or A-dimension may be specified from 4" to 96" (10 cm to 2.4m). The float or B, C, D, E and F dimensions may be specified from 1.5" to 93.5" (3.8 cm to 2.38m) with a minimum distance of 2.5" (6.3 cm) between each dimension. 4) To calculate the guide adder, round up the A-dimension to the next inch (2.5 cm). Fax:

44 Level Switches Switch-Pak TM with Compact Relay Controller APPLICATION This general purpose switch package provides a complete solution for high level spill prevention with a fixed level switch point and 16A compact relay controller for pump or valve actuation. The optional flash alarm brings immediate attention to tank high level conditions. The product is typically selected for corrosive bulk storage, day tank and waste sump applications. Specify the appropriate sensor technology, material and assembly dimension. FEATURES Fail-safe relay control of pumps and valves with 0-60 second time delay PP or PVDF construction for use in challenging corrosive environments Offered in 3 sensing technologies for broad application coverage Optional strobe brings immediate attention to tank alarm conditions PP enclosure rated NEMA 4X with 300 conduit swivel base AU SPECIFICATIONS Length: Switch point: Orientation: Supply voltage: Contact type: Contact rating: Contact delay: LED indication: Strobe type: Strobe flash: Process temp.: Electronics temp.: Pressure: Wetted material: Process mount: Enclosure rating: Encl. material: Conduit entrance: Classification: CE compliance: 6" to 10' (15 cm to 3m) 1 (set by factory) 30 vertical 120/ Hz. (1) SPDT relay A 0-60 seconds Power, relay and sensor status _21_: Xenon tube _22_: N/a _21_: 1 per second _22_: N/a F: -40 to 176 C: -40 to 80 F: -40 to 140 C: -40 to 60 AU13: 150 psi (10 bar) AZ13: 150 psi (10 bar) AV13: 25 psi (1.7 bar) 42 : PP 52 : PVDF _2_3: 2" NPT _2_7: 1 1/2" G NEMA 4X (IP) _21_: PP, UL94VO and polycarbonate _22_: PP, UL94VO Single, 1/2" NPT General purpose EN EMC EN safety TECH TIP For applications with highly corrosive media such as hydrofluoric acid, select the PVDF wetted material option for years of lasting and reliable performance. The PVDF extension fitting is heat welded and custom assembled to your A-dimension with either a PVDF buoyancy or PFA ultrasonic sensor. AU13-522_ LM Side Mount Order the LM50 side mount bracket for easy installation on open tanks. RELAY CONTROL The AC powered relay controller has a 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant PP and features a 300 swivel base for easy conduit alignment. Controller 44 Tel: levelsolutions@flowline.com

45 High or Low Level Detection and Control Level Switches SENSORS Vibration Typically applied in wastewater media with light coating and/or foaming characteristics Available in Ryton DIMENSIONS AU Ultrasonic Broadly applied in chemical, solvent, hydrocarbon and light weight oil media Available in PP or PFA 2" NPT (1-1/2" G) Buoyancy Best applied in clean water or water-like chemical media that is non-coating or scaling Available in PP or PVDF 2.8" (71mm) 6.5"(1mm) 3.5"(89mm) A (Specify) IP Switch-Pak Sensor technology (1) Z Vibration U Ultrasonic V Buoyancy Wetted material (2) 4 PP 5 PVDF Configuration (3) (4) 1 Controller with Strobe Alert 2 Controller only Process mount (5) (6) 3 2" NPT (US) 7 1 1/2" G (Metric) Dimensions (7) (8) A Specify (PP) (PVDF) STROBE ALERT A The controller with Strobe Alert configuration flashes when the relay is energized during a high or low level alarm condition. Strobe Alert Ordering Notes 1) Select the best sensor technology based upon your application. 2) The following are the available wetted materials for each sensor technology: Ultrasonic: 4 and 5 type Vibration: 4 type only Buoyancy: 4 and 5 type 3) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: AU "-E). 4) To order the CE configuration, place CE at the end of the P/N: (ie: AU "-CE) 5) The straight G thread version seals with an included Viton mounting gasket. 6) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 7) Specify the A-dimension at the end of the part number (ie: AU "). The A-dimension may be specified in 1/2" (1.3 cm) increments from 6" to 10' (15 cm to 3m). 8) To calculate the length adder, round up the A-dimension to the next foot (30 cm) and multiply it by the selected material adder. Fax:

46 Level Switches Switch-Pak TM with Compact Junction Box APPLICATION Offered in CSA approved intrinsically safe or general purpose configurations, this high level spill prevention switch package provides a fixed level switch point with a 60VA relay or dry contact closure interface for remote devices such as a PLC, SCADA or alarm. The product is typically selected for pressurized and/or highly corrosive bulk storage, day tank and waste sump applications. Specify the appropriate sensor technology, material and assembly dimension. FEATURES Corrosive single-point level detection with contact for PLC or control input PP or PVDF construction for use in challenging corrosive environments Offered in 3 sensing technologies for broad application coverage PP enclosure rated NEMA 4X with 300 conduit swivel base Available in intrinsically safe and general purpose configurations TECH TIP For applications with highly corrosive media such as hydrofluoric acid, select the PVDF wetted material option for years of lasting and reliable performance. The PVDF extension fitting is heat welded and custom assembled to your A-dimension with either a PVDF buoyancy or PFA ultrasonic sensor. AV16-524_ LM AU Side Mount Order the LM50 side mount bracket for easy installation on open tanks. SPECIFICATIONS Length: Switch point: Orientation: Process temp.: Pressure: Wetted material: Process mount: Enclosure rating: Encl. material: Conduit entrance: Termination: CE compliance: Ultrasonic sensor Supply voltage: Consumption: Contact type: Contact rating: Contact output: Classification: Vibration sensor Supply voltage: VDC Consumption: 25 ma maximum Contact type: (1) SPST relay Contact rating: 60 VA Contact output: Selectable NO/NC Classification: General purpose Buoyancy sensor Contact type: Contact rating: Contact output: Classification: 6" to 10' (15 cm to 3m) 1 (set by factory) 30 vertical F: -40 to 176 C: -40 to 80 AU15: 150 psi (10 bar) AZ18: 150 psi (10 bar) AV16: 25 psi (1.7 bar) 424_: PP 524_: PVDF _243: 2" NPT _247: 1 1/2" G NEMA 4X (IP) PP, UL94VO Single, 1/2" NPT 2-4 poles EN EMC EN safety VDC 25 ma maximum (1) SPST relay GP: 60 VA IS: A Selectable NO/NC Intrinsically safe (1) SPDT reed 15 VA Selectable NO/NC General purpose RELAY CONTROL For process automation with pumps, valves and alarms, package your level switch assembly with our remote relay controllers offered in a 35 mm DIN package. LC Tel: levelsolutions@flowline.com

47 High or Low Level Detection Level Switches SENSORS Vibration Typically applied in wastewater media with light coating and/or foaming characteristics Available in Ryton General purpose only DIMENSIONS Ultrasonic Broadly applied in chemical, solvent, hydrocarbon and light weight oil media Available in PP or PFA Intrinsically safe Buoyancy Best applied in clean water or water-like chemical media that is non-coating or scaling Available in PP or PVDF General purpose only AV " NPT (1-1/2" G) 2.8" (71mm) 2.5"(64mm) 3.6"(92mm) A (Specify) IP Switch-Pak Sensor technology (1) Z Vibration U Ultrasonic V Buoyancy Contacts / classification (2) 5 SPST relay / IS 6 SPDT reed / GP 8 SPST relay / GP Wetted material (3) 4 PP 5 PVDF Process mount (4) (5) 3 2" NPT (US) 7 1 1/2" G (Metric) Dimensions (6) (7) A Specify (PP) (PVDF) A JUNCTION BOX The compact junction box is constructed of UL approved fire retardant PP with a 6-pole terminal strip. Ordering Notes 1) Select the best sensor technology based upon your application. 2) The following are the available contacts for each sensor technology: Ultrasonic: 5 type only Vibration: 8 type only Buoyancy: 6 type only 3) The following are the available wetted materials for each sensor technology: Ultrasonic: 4 and 5 type Vibration: 4 type only Buoyancy: 4 and 5 type 4) The straight G thread version seals with an included Viton mounting gasket. 5) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 6) Specify the A-dimension at the end of the part number (ie: AV "). The A-dimension may be specified in 1/2" (1.3 cm) increments from 6" to 10' (15 cm to 3m). 7) To calculate the length adder, round up the A-dimension to the next foot (30 cm) and multiply it by the selected material adder. Fax:

48 Level Switches Switch-Pro TM with Compact Relay Controller AU APPLICATION Installed through the side wall, this general purpose high or low level switch package includes a 16A compact relay controller for pump or valve actuation with an optional flash alarm. The product is typically selected for bulk storage, day tank and process vessel applications. Specify the appropriate sensor technology and material. Controller FEATURES Fail-safe relay control of pumps and valves with 0-60 second time delay PP, Ryton or PFA wetted material for challenging corrosive liquids Optional strobe brings immediate attention to tank alarm conditions Offered in 2 sensing technologies for broad application coverage SPECIFICATIONS Orientation: Supply voltage: Contact type: Contact rating: Contact delay: LED indication: Strobe type: Strobe flash: Process temp.: Electronics temp.: Pressure: Wetted material: Process mount: Enclosure rating: Encl. material: Conduit entrance: Classification: CE compliance: 20 horizontal 120/ Hz. (1) SPDT relay A 0-60 seconds Power, relay and sensor status _11_: Xenon tube _12_: N/a _11_: 1 per second _12_: N/a F: -40 to 176 C: -40 to 80 F: -40 to 140 C: -40 to psi (10 bar) AU13: PP / PFA AZ13: Ryton 3/4" NPT (3/4" G) NEMA 4X (IP) _11_: PP, UL94VO and polycarbonate _12_: PP, UL94VO Single, 1/2" NPT General purpose EN EMC EN safety TECH TIP The AC powered relay controller has a 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The NEMA 4X enclosure is made of UL approved fire retardant PP and features a 300 swivel base. Switch-Pro Sensor technology (1) Z Vibration U Ultrasonic Wetted material (2) 1 Ryton 2 PFA Configuration (3) (4) 1 Controller with Strobe Alert 2 Controller only Process mount 0 3/4" NPT (US) 4 3/4" G (Metric) 2.8" (71 mm) A 13-1 AZ /4" NPT (3/4" G) 3.2" (81 mm) 2.1" (54 mm) 3.9" (99 mm) 8.2" (210 mm) 2.8" (71 mm) IP Ordering Notes 1) Select the best sensor technology based upon your application. 2) The following are the available wetted materials for each sensor technology: Ultrasonic: 1 and 2 type Vibration: 1 type only 3) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: AU E). 4) To order the CE configuration, place CE at the end of the P/N: (ie: AU CE). 48 Tel: levelsolutions@flowline.com

49 Switch-Pro TM with Compact Junction Box Level Switches APPLICATION Installed through the side wall and offered in CSA approved intrinsically safe or general purpose configurations, this high or low level switch package includes a 60VA relay for remote PLC, SCADA or alarm interface. The product is typically selected for bulk storage, day tank and process vessel applications. Specify the appropriate sensor technology and material. TECH TIP Switch-Pro AZ The NEMA 4X enclosure is made of UL approved fire retardant PP and features a 300 swivel base for easy conduit alignment. The power and switch conductors are pre-wired to the terminal strip. Sensor technology (1) Z Vibration U Ultrasonic Contacts / classification (2) 5 SPST relay / IS 8 SPST relay / GP Wetted material (3) 1 Ryton 2 PFA Process mount 0 3/4" NPT (US) 4 3/4" G (Metric) FEATURES 2.8" (71 mm) Junction Box Corrosive single-point level detection with contact for PLC or control input PP, Ryton or PFA wetted material for challenging corrosive liquids Offered in 2 sensing technologies for broad application coverage PP enclosure rated NEMA 4X with 300 conduit swivel base A 1-13 AU " (57 mm) 3/4" NPT (3/4" G) 2.1" (54 mm) 2.8" (71 mm) 2.8" (71 mm) 7.5" (191 mm) SPECIFICATIONS Orientation: Process temp.: Pressure: Wetted material: Process mount: Enclosure rating: Encl. material: Conduit entrance: Termination: CE compliance: Ultrasonic sensor Supply voltage: Consumption: Contact type: Contact rating: Contact output: Classification: 20 horizontal F: -40 to 176 C: -40 to 80 AU15: 150 psi (10 bar) AZ18: 150 psi (10 bar) AU15: PP / PFA AZ18: Ryton 3/4" NPT (3/4" G) NEMA 4X (IP) PP, UL94VO Single, 1/2" NPT 2-4 poles EN EMC EN safety VDC 25 ma maximum (1) SPST relay GP: 60 VA IS: A Selectable NO/NC Intrinsically safe Vibration sensor Supply voltage: VDC Consumption: 25 ma maximum Contact type: (1) SPST relay Contact rating: 60 VA Contact output: Selectable NO/NC Classification: General purpose IP Ordering Notes 1) Select the best sensor technology based upon your application. 2) The following are the available contacts for each sensor technology: Ultrasonic: 5 type only Vibration: 8 type only 3) The following are the available wetted materials for each sensor technology: Ultrasonic: 1 and 2 type Vibration: 1 type only Fax:

50 Level Switches Switch-Tek TM Ultrasonic Switch APPLICATION CSA approved intrinsically safe for use in hazardous area locations, the ultrasonic level switch is broadly applied in chemical, solvent, hydrocarbon and petroleum based liquids. Media examples include fuel, acetone and hydrochloric acid. The 60VA relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The submersible sensor is universally mounted through the wall or inside the tank. FEATURES CSA approved intrinsically safe for use in hazardous area locations PP or PFA sensor and cable rated NEMA 6 or IP68 60VA relay selectable NO or NC via power supply wiring polarity TECH TIP Select the PFA sensor for use in highly corrosive and/or ultrapure applications such as wafer etching. LU LU LU SPECIFICATIONS Orientation: Accuracy: Repeatability: Supply voltage: Consumption: Contact type: Contact rating: Contact output: Process temp.: Pressure: Sensor rating: Sensor material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Classification: Approvals: Parameters: Certificates: CE compliance: Universal 1 mm in water 0.5 mm in water VDC 25 ma maximum (1) SPST relay GP: 60 VA IS: A Selectable NO/NC F: -40 to 176 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 6 (IP68) 1 5: PP 2 5: PFA 1 5: PP 2 5: PFA 4-conductor, #22 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) 3/4" NPT (3/4" G / Rp) Viton Intrinsically safe CSA: Class I, Groups A, B, C & D; Class II, Groups E, F and G; Class III EEx: Class 1, Division 1, Groups A, B, C, D; EEx ib IIC T6 CSA: Vmax = 32V, Imax = 300 ma, Pmax = 1.3 W Ci = 0 F, Li = 0 H EEx: Ui = 32V; Ii = 300 ma; Pi = 1.3 W; Ci = 0 F; Li = 0 H CSA: LR EN EMC EN safety Ultrasonic Sensor material (1) 1 PP 2 PFA Sensor length 3 Short 4 Long Process mount (2) 0 3/4" NPT (US) 2 3/4" G / Rp (Metric) LU10-5 Ordering Notes 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LU '). 2) The short Metric sensor is offered with conical Rp threads on both sides of the wrench flat. The long Metric sensor is offered with straight G threads on the sensing side and conical Rp threads on the cable side of the wrench flat. 50 Tel: levelsolutions@flowline.com

51 Switch-Tek TM Vibration Switch Level Switches APPLICATION The general purpose vibration level switch is a great choice for dirty liquids including those with light to medium coating, scaling or foaming characteristics. Media examples include wastewater, diluted caustic soda and light weight oil. For optimum performance and proactive maintenance, the sensor automatically adjusts for coating build up, and if necessary, outputs a preventative maintenance alarm. The 60VA relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The submersible sensor is universally mounted through the wall or inside the tank. FEATURES Automatic coating adjustment optimizes sensor performance with media build-up Ryton sensor and PP cable rated NEMA 6 or IP68 Coating preventative maintenance alarm saves time and money 60VA relay selectable NO or NC via power supply wiring polarity INTELLIGENCE LZ Using advanced self-learning technology, the level switch automatically adjusts to increased material build-up on the forks for maximum coating performance. If the coating becomes too significant, then the sensor will actuate a transistor alarm for proactive maintenance. SPECIFICATIONS Orientation: Accuracy: Repeatability: Supply voltage: Consumption: Contact type: Contact rating: Contact output: Maint. alarm: Process temp.: Pressure: Sensor rating: Sensor material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Classification: CE compliance: Universal 1 mm in water 0.5 mm in water VDC 25 ma maximum (1) SPST relay 60 VA Selectable NO/NC NPN transistor, 10 ma max. F: -40 to 176 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 6 (IP68) Ryton (glass filled), Viton cable grommet Polypropylene 5-conductor, #24 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) 3/4" NPT (3/4" G) Viton General purpose EN EMC EN safety RELAY CONTROL For process automation with pumps, valves and alarms, package your vibration level switch with our remote relay controllers offered in a 35 mm DIN package. Vibration Process mount (1) 0 3/4" NPT (US) 2 3/4" G (Metric) LZ LC Ordering Notes 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LZ ). Fax:

52 Level Switches Switch-Tek TM Vertical Buoyancy Switch APPLICATION The general purpose buoyancy level switch is a perfect choice for relatively clean water and chemical solutions with non-coating and/or scaling characteristics. Media examples include acetic acid and process water. The baffle body eliminates switch chatter caused by turbulence. The dry contact closure provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The sensor mounts vertically inside the tank on our Smart Trak or Switch-Pak fittings. FEATURES Baffle body and dynamically stabilized float eliminate turbulence switch chatter PP or PVDF sensor and cable rated NEMA 6 or IP68 15 VA dry contact with selectable NO or NC state via wire selection SPECIFICATIONS Orientation: Accuracy: Repeatability: Specific gravity: Contact type: Contact rating: Process temp.: Pressure: Sensor rating: Sensor material: Cable jacket mat.: Cable type: Cable length: Process mount: Classification: CE compliance: 20 vertical 2 mm in water 1 mm in water 0.8 minimum (1) SPDT reed 15 VA F: -40 to 176 C: -40 to psi ( C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 6 (IP68) 13_1: PP 53_1: PVDF 13_1: PP 53_1: PFA 3-conductor, #22 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) 3/4" NPT (3/4" Rp) General purpose EN EMC EN safety Compatible with Flowline controller, alarm and fitting accessories TECH TIP For years of reliable service in highly corrosive media, select the PVDF material option. The rugged sensor features a PVDF body with a PFA cable. LV LV Buoyancy Sensor material (1) 1 PP 5 PVDF Process mount 0 3/4" NPT (US) 5 3/4" Rp (Metric) LV Ordering Notes 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LV '). 52 Tel: levelsolutions@flowline.com

53 Switch-Tek TM Optic Leak Detection Switch Level Switches APPLICATION The general purpose optic switch is an excellent choice for leak detection in and around secondary containment sumps, tanks and pipes. The sensor can be applied in a broad range of chemical solutions. Media examples include ferric chloride and chlorine. The 60VA relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The submersible sensor is universally mounted within the interstitial space of the vessel. FEATURES Fail-safe leak sensor inverts wet to alert user for maintenance 60VA relay selectable NO or NC via power supply wiring polarity PP or PFA sensor and cable rated NEMA 6 or IP68 L L SPECIFICATIONS Orientation: Accuracy: Repeatability: Supply voltage: Consumption: Contact type: Contact rating: Contact output: Process temp.: Pressure: Sensor rating: Sensor material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Classification: CE compliance: TECH TIP Universal 1 mm in water 0.5 mm in water VDC 25 ma maximum (1) SPST relay 60 VA Selectable NO/NC F: -40 to 176 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 6 (IP68) 1 5: PP 2 5: PFA 1 5: PP 2 5: PFA 4-conductor, #22 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) 3/4" NPT (3/4" G / Rp) Viton General purpose EN EMC EN safety The low-profile, LH float switch is ideal for leak detection on flat, horizontal surfaces such as a floor. Constructed of Valox 420 and foam polypropylene, the reed switch is rated 30 VA and is offered with a 10 (3m) cable. Optic Sensor material (1) 1 PP 2 PFA Sensor length 3 Short 4 Long Process mount (2) 0 3/4" NPT (US) 2 3/4" G / Rp (Metric) LO10-5 LH Ordering Notes 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LO '). 2) The short Metric sensor is offered with conical Rp threads on both sides of the wrench flat. The long Metric sensor is offered with straight G threads on the sensing side and conical Rp threads on the cable side of the wrench flat. Fax:

54 Level Switches Switch-Tek TM Guard Capacitance Switch APPLICATION The general purpose guard capacitance level switch is a great choice for a wide range of aqueous based conductive liquids with light coating, crystallizing or scaling characteristics. Media examples include copper sulfate and brine. The 60VA relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The submersible sensor is universally mounted through the wall or inside the tank. FEATURES Guard circuit optimizes sensor performance in coating type media Rugged PP sensor and cable rated NEMA 6 or IP68 60VA relay selectable NO or NC via power supply wiring polarity Compatible with Flowline alarm, controller and fitting accessories TECH TIP The capacitance switch has a unique RF guard circuit which eliminates the coating signal path between the active and reference electrodes. For best performance in coating liquids, install the sensor horizontally through the side wall of a non-metallic tank. It s coating liquid level made simple! LP SPECIFICATIONS Orientation: Accuracy: Repeatability: Dielectric range: Conductive range: Supply voltage: Consumption: Contact type: Contact rating: Contact output: Process temp.: Pressure: Sensor rating: Sensor material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Classification: CE compliance: Reference Universal 1 mm in water 0.5 mm in water > 20 constants > 100 micromhos VDC 25 ma maximum (1) SPST relay 60 VA Selectable NO/NC F: -40 to 176 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 6 (IP68) PP PP 4-conductor, #22 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) 3/4" NPT (3/4" G / Rp) Viton General purpose EN EMC EN safety Active Guard Capacitance Process mount (1) (2) 0 3/4" NPT (US) 2 3/4" G / Rp (Metric) LP Ordering Notes 1) The Metric sensor is offered with straight G threads on the sensing side and conical Rp threads on the cable side of the wrench flat. 2) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LP '). 54 Tel: levelsolutions@flowline.com

55 Switch-Tek TM Non-Intrusive Capacitance Switch Level Switches APPLICATION The general purpose non-intrusive capacitance level switch is a great choice for highly corrosive or ultrapure, aqueous based liquids with non-coating and/or scaling characteristics. Media examples include deionized water and hydrochloric acid. The 60VA relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The sensor is bracket mounted on the exterior wall of non-metallic tanks. FEATURES Non-intrusive level detection through plastic or fiberglass tank walls with a maximum thickness of 1 PE, PP or PVDF mounting bracket designed for adhesive and plastic tack-weld installation TECH TIP With two calibration adjustments, the non-intrusive switch set point will be customized to your specific tank wall thickness and application media. Calibration Components LP & LM SPECIFICATIONS Tank mounting: Tank mat. comp.: Tank wall thick.: Accuracy: Repeatability: Dielectric range: Conductive range: Supply voltage: Consumption: Contact type: Contact rating: Contact output: Process temp.: Enclosure rating: Enclosure mat.: Conduit entrance: Bracket material: Bracket mounting: Cable jacket mat.: Cable type: Cable length: Classification: CE compliance: Non-intrusive Non-metallic < 1" (25 mm) 1 mm in water 0.5 mm in water > 10 constants > 100 micromhos VDC 25 ma maximum (1) SPST relay 60 VA Selectable NO/NC F: -40 to 176 C: -40 to 80 NEMA 4X (IP) PSO Single, 1/2" NPT 1005: PP 5005: PVDF 6005: PE 3M adhesive / plastic thermal weld PP 4-conductor, #22 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) General purpose EN EMC EN safety Capacitance Bracket material (1) (2) (3) (4) 1 PP 5 PVDF 6 PE IP LP Ordering Notes 1) Select the bracket that matches the tank wall material in your application. 2) Each sensor comes with one user specified bracket. Additional brackets may be ordered separately for multiple installation points: LP : PP bracket LP : PVDF bracket LP : PE bracket 3) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LP '). 4) To add a liquid tight fitting, order the LM with your LP50 series. Fax:

56 Level Switches Switch-Tek TM Mini-Float Switch SPECIFICATIONS LH APPLICATION Offered in both vertical and horizontal float configurations, the general purpose mini-float level switches are a great choice for less critical applications with clean water and/or chemical solutions. Media examples include water and acetic acid. The dry contact closure provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. LV LV Orientation: Accuracy: Repeatability: Specific gravity: Contact type: Contact rating: Contact output: Process temp.: Pressure: Sensor material: Wire type: Wire length: Wire jacket mat.: Process mount: Classification: CE compliance: LV20: ± 20 vertical LH25: ± 20 horizontal ± 5 mm in water ± 2 mm in water LV20: 0.8 minimum LH25: 0.6 minimum (1) SPST reed LV20: 15 VA LV25: 30 VA Selectable NO/NC LV20: F: -40 to 176 LV20: C: -40 to 80 LH25: F: -40 to 221 LH25: C: -40 to 105 LV20: 10 psi (0.7 bar) LH25: 100 psi (6.9 bar) LV20-12_1: PP LV20-52_1: PVDF LH : PP 2-conductor, #22 AWG Standard: 2' (60 cm) Special order: 25' (7.6m) or 50' (15.2m) LV20-12_1: PVC LV20-52_1: TFE LH2_-1201: Polymeric LV20: 1/8" NPT LH25: 1/2" NPT General purpose EN EMC EN safety Mini-Float Vertical Sensor material (1) 1 PP 5 PVDF Process mount 0 1/8" NPT (US) 5 1/8" Rp (Metric) Horizontal Installation type 5 Outside-in / inside-out LV LH Ordering Notes 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: LV '). 56 Tel: levelsolutions@flowline.com

57 Switch-Tek TM High-Temp. Float Switch Level Switches SPECIFICATIONS LH35-S301 APPLICATION Offered in both vertical and horizontal float configurations, the general purpose hightemp float level switches are an ideal choice for relatively clean water, diluted chemical or petroleum based liquids with non-coating and/or scaling characteristics. Media examples include hot deionized water and cooking oil. The dry contact closure provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. FEATURES 316 SS float and stem for high temp and pressure applications LV35-S201 LV36-S201 Orientation: Accuracy: Repeatability: Specific gravity: Contact type: Contact rating: Contact output: Process temp.: Pressure: Sensor rating: Sensor material: Process mount: Wire type: Wire length: Wire jacket mat.: Classification: CE compliance: LV3_: ± 20 vertical LH35: ± 20 horizontal ± 3 mm in water ± 1 mm in water LV3_: 0.7 min. LH35: 0.6 min. (1) SPST reed LV35/LH35: 30 VA LV36: 100 VA Selectable NO/NC F: -40 to 392 C: -40 to 200 LV35: 300 psi max. (20.7 bar max.) LV36: 500 psi max. (34.5 bar max.) LH35: 500 psi max. (34.5 bar max.) NEMA 6 (IP68) 316 ss LV35: 1/8" NPT LV36: 1/4" NPT LH30: 1/2" NPT 2-wire, #22 AWG 24" (61 cm) Polymeric General purpose EN EMC EN safety 30 VA dry contact with selectable NO or NC state via float orientation Offered in four configurations with pressures up to 500 psi Float Vertical Maximum pressure (1) psi (20.7 bar) psi (34.5 bar) Horizontal Maximum pressure (2) psi (34.5 bar) LV3 -S201 LH3 -S301 Ordering Notes 1) Each sensor type has a different shape and dimension. Please check the dimensional specifications prior to ordering. 2) The normally open or closed contact output is selectable based on the installed 12:00 or 6:00 sensor orientation. Fax:

58 Level Switches Level Switch Compact Relay Controller APPLICATION The general purpose controller is offered in two versions with 1 relay and 1 or 2 sensor inputs. The LC10 provides a high or low level switch with a single sensor input. The LC11 provides latched automatic fill or empty control with two sensor inputs, and is typically integrated with Smart Trak. The optional flash alarm brings immediate attention to process conditions. Package the controller with any of our level switches. FEATURES Fail-safe compact relay control of pumps and valves with 0-60 second time delay Optional strobe brings immediate attention to tank alarm conditions PP enclosure rated NEMA 4X with 300 swivel base for easy conduit alignment Easy setup with LED indicators for sensor, power and relay status LC TECH TIP LC The AC powered relay controller has a 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant PP with a swivel base for easy conduit alignment. SPECIFICATIONS Supply voltage: Consumption: Strobe type: Strobe flash: Sensor inputs: Sensor supply: Contact type: Contact rating: Contact latch: Contact delay: LED indication: Electronics temp.: Enclosure rating: Encl. material: Encl. mount: Encl. rotation: Conduit entrance: Classification: Certificate: CE compliance: 120/ Hz. 0.25A 10_1: N/A 10_2: Xenon tube 10_1: N/A 10_2: 1 per second LC10: (1) two-wire level switch LC11: (2) two-wire level switches ma LC10: (1) SPDT relay LC11: (1) SPDT relay, latching A LC10: N/A LC11: Select ON/OFF 0-60 seconds Sensor, power and relay status F: -40 to 158 C: -40 to 70 NEMA 4X (IP) 10_1: PP, UL94VO 10_2: PP, UL94VO and polycarbonate 100_: 3/4" NPT 105_: 3/4" Rp 300 swivel base Single, 1/2" NPT General purpose CSA: LR EN EMC EN safety IP Controller Contact / input(s) (1) 0 1 SPDT relay / 1 sensor 1 1 SPDT latching relay / 2 sensors Enclosure mount 0 3/4" NPT (US) 5 3/4" Rp (Metric) Configuration (2) (3) (4) 1 Controller only 2 Controller with Strobe Alert LC1-10 Ordering Notes 1) Select the best configuration based upon your control requirements. The following are the typical applications for each type: LC10: High or low level switch LC11: Automatic fill or empty 2) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: LC E). 3) To order the CE configuration, place CE at the end of the P/N: (ie: LC CE). 4) For a liquid tight cable connection, order the LM Tel: levelsolutions@flowline.com

59 Level Switch Remote Controller Level Switches SPECIFICATIONS LC APPLICATION Available in two classifications; CSA approved general purpose or isolation with built-in intrinsic safety barriers for use with associated apparatus. Each classification is offered in three versions with 1 or 2 relays and 1-3 sensor inputs. The LC40/90 provides a high or low level switch with a single sensor input. The LC41 provides latched automatic fill or empty control with two sensor inputs. The LC42/92 provides latched automatic fill or empty control and an independent high or low level switch with three sensor inputs. FEATURES The intrinsically safe ultrasonic level switch is CSA approved for use in hazardous areas. LM Optional built-in intrinsic safety barriers for hazardous level applications Fail-safe remote relay control of pumps and valves with 0-60 second time delay Easy setup with LED indicators for sensor, power and relay status 35 mm DIN rail mount PP enclosure with removable terminal strips LU Supply voltage: Consumption: Sensor inputs: Sensor supply: Contact type: Contact rating: Contact latch: Contact delay: LED indication: Electronics temp.: Enclosure type: Encl. material: Classification: Approvals: (LC9_ only) Parameters: (LC9_ only) Certificate: CE compliance: 120/ Hz. 5 watts max. LC40/90: (1) two-wire level switch LC41: (2) two-wire level switches LC42/92: (3) two-wire level switches ma LC40/90: (1) SPDT relay LC41: (1) SPDT relay, latching LC42/92: (2) SPDT relays, (one latching) A Selectable ON/OFF 0-60 seconds Sensor, power and relay status F: -40 to 158 C: -40 to mm DIN rail PP, UL94VO LC4_: General purpose LC9_: Assoc. apparatus CSA: Class I, Groups A, B, C & D; Class II, Groups E, F and G; Class III CSA: Voc = VDC; Isc = A; Ca = F; La = mh CSA: LR EN EMC EN safety Controller Classification (1) 4 General purpose 9 Isolation (hazardous) Contact(s) / input(s) (2) (3) (4) (5) 0 1 SPDT relay / 1 sensor 1 1 SPDT latching relay / 2 sensors 2 2 SPDT relays (1 latching) / 3 sensors STANDARD CONTROLLER POWER 3.9" (98mm) INVERT DELAY INVERT DELAY RELAY 1 RELAY 2 LATCH INPUT 1 INPUT 2A ON OFF INPUT 2B 1.8" (44mm) 2.7" (68mm) LC " (92mm) 3.1" (79mm) 35mm DIN Rail Ordering Notes 1) Select the classification based upon your general purpose or isolation (intrinsic safety for associated apparatus) requirements. 2) Select the best configuration based upon your control requirements. The following are the typical applications for each type: LC90: High or low level switch LC92: Automatic fill or empty with high or low level switch 3) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: LC E). 4) To order the CE configuration, place CE at the end of the P/N: (ie: LC CE). 5) For field mount installation in a NEMA 4X polycarbonate windowed enclosure, order the LM (single controller box) or the LM (two controller box). Fax:

60 Level Switches Smart Trak TM Multi-Point Level Switch Fitting APPLICATION The adjustable multi-point fitting enables users to install and adjust up to four Flowline level switches to any depth along the entire length of track. The fitting is typically applied in atmospheric day tanks, process vessels and waste sumps. Select the appropriate track length based upon your applied tank height and add one sensor car kit for each sensor to be installed on the track. FEATURES Typical Assembly SPECIFICATIONS Fitting Track lengths: Adjustability: Mixing velocity: Process temp.: Pressure: Fitting material: Process mount: Mount. gasket: US: 2', 4', 6', 8', 10' Metric: 1m, 2m, 3m Entire track length < 1.5 fps (.45 mps) F: -40 to 176 C: -40 to 80 Atmospheric PP (20% glass fill) 1_01: 2" NPT 1_61: 2" G Viton Adjustable level sensor cars make setup or changes fast and simple Standard track lengths are easily cut to applied length in the field Rugged PP construction for use with challenging corrosive liquids Smart Trak TRACK KIT Track kits are offered in standard lengths with a 2 process mount and 3/4 nipple for an enclosure or conduit. Sensor cables are sealed via neoprene and santoprene gaskets. LM Track length (1) (2) (3) US 2 24" (61 cm) 4 48" (122 cm) 6 72" (183 cm) 8 96" (244 cm) 0 120" (305 cm) Process mount (4) (5) 0 2" NPT (US) 6 2" G (Metric) LM Metric cm (39.4") cm (78.7") cm (118.1") IP Junction box Sensor inputs: Terminal strip: Enclosure rating: Encl. material: Encl. rotation: Conduit entrance: Temp. rating: CE compliance: Side mount Bracket material: Female threads: Tank installation: CAR KIT 1-4 sensors 12 pole socket NEMA 4X (IP) PP, UL94VO 300 swivel base Single, 1/2" NPT F: -40 to 158 C: -40 to 70 EN EMC EN safety PP 1001: 2" NPT 1051: 2" G Bolt or plastic weld LM At the heart of the fitting is the adjustable sensor car. Each kit includes a 3/4 NPT or Rp car with track mounting hardware. Order one car kit for each level sensor. Ordering Notes 1) Select the appropriate US or Metric track length based upon the maximum sensor depth and/or application tank height. Standard track lengths may be cut to custom lengths in the field. 2) Each track is provided with one 2" plug fitting less the required sensor cars. 3) Order one LM (3/4" NPT) or LM (3/4" Rp) sensor car kit for each level sensor to be installed on Smart Trak. 4) For integral wiring and/or conduit termination, order one LC (NPT) or LC (Rp) compact junction box. 5) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 60 Tel: levelsolutions@flowline.com

61 Switch-Pak TM Single Point Level Switch Fitting Level Switches APPLICATION SPECIFICATIONS The single-point fitting enables users to install and extend a Flowline level switch through the top wall of the tank. Offered in PVC, PP and PVDF materials, the fitting is typically applied in bulk storage tanks, day tanks and waste sumps. Each fitting is built custom to your requirements. Select the appropriate material based upon your application liquid and specify the A-dimension, taking into consideration the installed sensor length. FEATURES Thermal or solvent welded fitting is built to your switch insertion length LM Fitting Length: Process temp.: Pressure: Fitting material: Process mount: Mount. gasket: Sensor adapter: 6" to 10' (15 cm to 3m) F: -40 to 176 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. 70_1: PVC 10_1: PP 50_1: PVDF _001: 2" NPT _061: 1.5" G Viton 3/4" NPT (3/4" Rp) Offered in PVDF, PP and PVC material for maximum chemical compatibility TECH TIP For easy field assembly, order the LM PVC plug fitting and sensor adapter. Then solvent weld a 3/4 PVC schedule 40 pipe between the parts to the desired length. It s level made simple. Switch-Pak Fitting material 7 PVC 1 PP 5 PVDF Process / sensor mount (1) (2) 0 2" NPT / 3/4" NPT (US) 6 1 1/2" G / 3/4" Rp (Metric) Dimensions (3) (4) LM LM LM IP Junction box Sensor inputs: Terminal strip: Enclosure rating: Encl. material: Encl. rotation: Conduit entrance: Temp. rating: CE compliance: Side mount Bracket material: Female threads: Tank installation: 1 sensor 6 pole socket NEMA 4X (IP) PP, UL94VO 300 swivel base Single, 1/2" NPT F: -40 to 158 C: -40 to 70 EN EMC EN safety PP 1001: 2" NPT 1051: 2" G Bolt or plastic weld Ordering Notes 1) For integral wiring and/or conduit termination, order one LC (NPT) or LC (Rp) compact junction box. 2) For installation on open tanks, order the LM (2" NPT) or LM (2" G) side mount bracket. 3) Specify the A-dimension at the end of the part number (ie: LM "). The A-dimension may be specified in 1/2" (1.3 cm) increments from 6" to 10' (15 cm to 3m). Switch-Pak will be solvent (PVC) or socket welded (PP and PVDF) per your length specification. 4) To order the 2" plug fitting and 3/4" sensor adapter unassembled (without a 25 mm pipe) part number (ie: LM "). IP Fax:

62 Level Switches Strobe Alert TM Compact Flash Alarm APPLICATION Offered in both AC and DC powered configurations, the compact flash alarm brings immediate attention to process conditions. The alarm is compatible with our round enclosures and may be actuated with any of our level switch, flow switch or relay control products. Specify the strobe supply voltage. FEATURES LC IP High intensity amber flash alarm visually alerts on-site personnel Rugged NEMA 4X polycarbonate enclosure for harsh environments Mounts directly on any Flowline round compact enclosure SPECIFICATIONS Supply voltage: Consumption: Strobe color: Strobe type: Strobe flash: Strobe life: Electronics temp.: Enclosure rating: Encl. material: Encl. compatibility: Wire type: Wire length: Wire jacket mat.: Classification: Certificate: TECH TIP LC09: VDC LC10: Hz. LC10-E: Hz. 3 watts max. Amber Xenon tube 1 per second 10M cycles F: -40 to 158 C: -40 to 70 NEMA 4X (IP) Polycarbonate LC05, LC06, LC10,LC11 and LC30 enclosures 2-wire, #22 AWG 5" (12.7 cm) Polymeric General purpose CSA: LR The alarm is commonly applied in tank spill prevention, pump or process protection applications. Install the alarm in a visible location. We recommend the use of secondary audible alarms in critical applications. LC Strobe Alert Supply voltage (1) (2) VDC VAC LC Ordering Notes 1) To factory configure the LC for 240 VAC, place an E at the end of the P/N (ie: LC E). 2) For field mount and conduit termination, order a LC06-10_1 junction box. 62 Tel: levelsolutions@flowline.com

63 Compact Junction Box Level Switches APPLICATION Offered in small and large sizes, the junction box is ideal for compact sensor wiring and conduit termination. The junction box is universally compatible with our level switch, flow switch and fitting products. The small enclosure has 6 poles and is typically applied with a single level or flow switch sensor. The large enclosure has 12 poles for multiple level switches and is typically applied with Smart Trak. Select the size and appropriate mounting thread. FEATURES PP enclosure rated NEMA 4X with 300 conduit swivel base Compatible with Flowline sensors, installation fittings and alarms Removable terminal strips with upper and lower screw poles Offered in large and small sizes for single and multi-point installations LC SPECIFICATIONS Sensor inputs: Terminal strip: Enclosure rating: Encl. material: Encl. mount: Encl. rotation: Conduit entrance: Temp. rating: CE compliance: LC05: 1-4 sensors LC06: 1-2 sensors LC05: 12 pole socket LC06: 6 pole socket NEMA 4X (IP) PP, UL94VO 1001: 3/4" NPT 1051: 3/4" Rp 300 swivel base Single, 1/2" NPT F: -40 to 158 C: -40 to 70 EN EMC EN safety LC LC LC Junction Box Size / terminals (1) 5 Large 12 pole (1-4 sensors) 6 Small 6 pole (1-2 sensors) Enclosure mount 0 3/4" NPT (US) 5 3/4" Rp (Metric) LC Ordering Notes 1) For a liquid tight cable connection, order the the LM connector. IP Fax:

64 Flow Switches Introduction to Flow Switch & Control INTRODUCTION Liquid Pump Protection Flowline offers the most capable range of solid state liquid and gas flow switch solutions for corrosive pump, fan exhaust motor and process protection applications. Sensors Offered in PP/Ryton or PVDF bodies with a 1A relay, the general purpose sensors are broadly applied in water, chemicals, light weight oils, process gases and exhaust fumes. Packages The sensors are also offered in compact packages with integral relay controllers for pump and valve control, or junction boxes for convenient power and switch termination. FLOW SWITCHES Switch Thermo-Flo Thermo-Flo Switch-Pro Switch-Pro Series FT10 GT10 A_1_ A_1_ Media Liquid Gas Liquid/Gas Liquid/Gas Range.04-3 fps 1-90 fps.04-3/1-90 fps.04-3/1-90 fps Supply DC DC AC DC Output 1A 1A 10A 1A Temp. 60 C 60 C 60 C 60 C Press. 10 bar 10 bar 10 bar 10 bar CONTROLLERS Control Compact Remote Series LC30 LC80 Inputs Output (1) 10A (2) 10A Mount Field Panel Supply AC AC Page Material PP/Ryton PP/Ryton PP/Ryton PP/Ryton or PVDF or PVDF or PVDF or PVDF Class GP GP GP GP Page 67 Gas Process Protection 64 Tel: levelsolutions@flowline.com

65 Thermo-Flo TM Liquid & Gas Flow Switch Flow Switches APPLICATION Offered in liquid and gas configurations for lowflow detection, the general purpose flow switch is a great choice for a diverse range of relatively clean, non-coating media. Liquid examples include deionized water and sulfuric acid. Gas examples include nitrogen and scrubber exhaust fumes. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2 to 1 1/2 ; the long sensor is applied in 2 and up. The liquid switch set point may be adjusted from.04 to 3 fps, and the gas switch from 1 to 90 fps. FEATURES Adjustable set point with LED for flow or no-flow status indication Solid state sensor is not damaged by over-ranging flow velocities SET POINT The clear adjustment knob doubles as an LED to indicate the flow status. Thermo-Flo Application media F Liquid G Gas Sensor material (1) 1 PP 5 PVDF Sensor length (2) (3) 3 Short 4 Long Process mount (4) 0 3/4" NPT (US) 2 3/4" G / Rp (Metric) FT FT T10-5 IP FT SPECIFICATIONS Set point range: Factory set point: Repeatability: Response time: Set point adjust.: Supply voltage: Consumption: Contact type: Contact rating: Contact output: Process temp.: Electronics temp.: Pressure: Sensor rating: Sensor material: Cable jacket mat.: Cable type: Cable length: Process mount: Mount. gasket: Classification: CE compliance: FT10:.04 to 3 fps (.012 to.91 mps) GT10: 1 to 90 fps (.3 to 27 mps) FT10:.2 fps (.06 mps) GT10: 10 fps (3 mps).5% of set fixed temperature 1-10 seconds Potentiometer VDC 70 ma maximum (1) SPST relay 60 VA Selectable NO/NC F: 32 to 140 C: 0 to 60 F: -40 to 140 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. NEMA 4X (IP) 1 5: PP-Ryton 5 5: PVDF 1 5: PP 5 5: PFA 4-conductor, #22 AWG (shielded) Standard: 10' (3m) Special order: 25' (7.6m) or 50' (15.2m) 3/4" NPT (3/4" G / Rp) Viton General purpose EN EMC EN safety Ordering Notes 1) To special order a 25' (7.6m) or 50' (15.2 m) sensor cable, place the cable length at the end of the part number (ie: FT '). 2) Select the short sensor for use with pipe sizes from 3/4"-1 1/2" (D25-D50) and the long sensor for 2" and higher (D63 up). 3) Select the Pulse-Point fitting to dampen the pulsating flow of liquid metering pumps. The FT50 is compatible with the short NPT flow switch. 4) The metric sensor is offered with straight G threads on the sensing side and conical Rp threads on the cable side of the wrench flat. Fax:

66 Flow Switches Switch-Pro TM with Compact Relay Controller APPLICATION This general purpose liquid or gas switch package provides a complete solution for low flow pump or process protection with a 16A compact relay controller. The optional flash alarm brings immediate attention to low flow conditions. The short sensor is intended for use in pipe or ducting from 1/2 to 1 1/2 ; the long sensor is applied in 2 and up. The product is broadly selected for low or noflow applications. Specify the appropriate sensor technology, length and material. AT FEATURES Fail-safe relay control of pumps and valves with 0-60 second time delay Optional strobe brings immediate attention to flow alarm conditions PP.Ryton or PVDF wetted material for challenging corrosive fluids Switch-Pro Application media T Liquid G Gas Sensor length (1) (2) 2 Short 4 Long Sensor material 1 PP 3 PVDF Configuration (3) (4) 1 Controller with Strobe Alert 2 Controller only Process mount 0 3/4" NPT (US) 4 3/4" G (Metric) A 1-6 FT IP SPECIFICATIONS Set point range: Factory set point: Repeatability: Response time: Set point adjust.: Viscosity range: Supply voltage: Contact type: Contact rating: Contact delay: LED indication: Strobe type: Strobe flash: Process temp.: Electronics temp.: Pressure: Wetted material: Process mount: Mount. gasket: Enclosure rating: Encl. material: Conduit entrance: Classification: CE compliance: AT1_:.04 to 3 fps (.012 to.91 mps) AG1_: 1 to 90 fps (.3 to 27 mps) AT1_:.2 fps (.06 mps) AG1_: 10 fps (3 mps).5% of set fixed temperature 1-10 seconds Potentiometer AT1_: centipoise AG1_: N/a 120/ Hz. (1) SPDT relay A 0-60 seconds Power, relay and sensor status _61_: Xenon tube _62_: N/a _61_: 1 per second _62_: N/a F: 32 to 140 C: 0 to 60 F: -40 to 140 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. 16 : PP-Ryton 36 : PVDF 3/4" NPT (3/4" G) Viton NEMA 4X (IP) _61_: PP, UL94VO and polycarbonate _62_: PP, UL94VO Single, 1/2" NPT General purpose EN EMC EN safety Ordering Notes 1) Select the short sensor for use with pipe sizes from 3/4"-1 1/2" (D25-D50) and the long sensor for 2" and higher (D63 up). 2) Select the Pulse-Point fitting to dampen the the pulsating flow of liquid metering pumps. Order the FT (PP) fitting or the FT (PVDF) fitting. The FT50 is compatible with the short NPT flow switch. 3) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: AT E). 4) To order the CE configuration, place CE at the end of the P/N: (ie: AT CE). Tel: levelsolutions@flowline.com

67 Switch-Pro TM with Compact Junction Box Flow Switches APPLICATION SPECIFICATIONS This general purpose liquid or gas switch package provides a low flow detection solution for pump or process protection with a 1A relay interface for remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2 to 1 1/2 ; the long sensor is applied in 2 and up. The product is broadly selected for low or no-flow applications. Specify the appropriate sensor technology, length and material. FEATURES 1A relay selectable NO or NC via power supply wiring polarity PP enclosure rated NEMA 4X with 300 conduit swivel base PP/Ryton or PVDF wetted material for challenging corrosive fluids Compatible with Flowline controller, alarm and fitting accessories AT Junction Box AT Set point range: Factory set point: Repeatability: Response time: Set point adjust.: Viscosity range: Supply voltage: Consumption: Contact type: Contact rating: Contact output: LED indication: Process temp.: Electronics temp.: Pressure: Wetted material: Process mount: Mount. gasket: Enclosure rating: Encl. material: Conduit entrance: Termination: Classification: CE compliance: AT1_:.04 to 3 fps (.012 to.91 mps) AG1_: 1 to 90 fps (.3 to 27 mps) AT1_:.2 fps (.06 mps) AG1_: 10 fps (3 mps).5% of set fixed temperature 1-10 seconds Potentiometer AT1_: centipoise AG1_: N/a VDC 70 ma maximum (1) SPST relay 60 VA Selectable NO/NC Flow status F: 32 to 140 C: 0 to 60 F: -40 to 140 C: -40 to psi (10 25 C., 1.7 psi (.113 bar) per C. above 25 C. 161_: PP-Ryton 163_: PVDF 3/4" NPT (3/4" G) Viton NEMA 4X (IP) PP, UL94VO Single, 1/2" NPT 4-poles General purpose EN EMC EN safety Switch-Pro Application media T Liquid G Gas Sensor length (1) 7 Short 8 Long Sensor material 1 PP 3 PVDF Process mount (2) 0 3/4" NPT (US) 4 3/4" G (Metric) A 1-63 IP Ordering Notes 1) Select the short sensor for use with pipe sizes from 3/4"-1 1/2" (D25-D50) and the long sensor for 2" and higher (D63 up). 2) Select the Pulse-Point fitting to dampen the the pulsating flow of liquid metering pumps. Order the FT (PP) fitting or the FT (PVDF) fitting. The FT50 is compatible with the short NPT flow switch. Fax:

68 Flow Switches Flow Switch Compact Relay Controller APPLICATION The general purpose controller provides single channel low flow switch automation with one sensor input. The optional flash alarm brings immediate attention to flow alarm conditions. Package the controller with our liquid or gas flow switch sensors on page. FEATURES Fail-safe compact relay control of pumps and valves with 0-60 second time delay Optional strobe brings immediate attention to flow alarm conditions PP enclosure rated NEMA 4X with 300 swivel base for easy conduit alignment Easy setup with LED indicators for sensor, power and relay status Compatible with Flowline liquid (FT10) or gas (GT10) flow switch sensors TECH TIP LC The AC powered relay controller has a 16A relay, adjustable time delay, LED indicators and NO or NC invert switch. The rugged NEMA 4X enclosure is made of UL approved fire retardant PP with a swivel base for conduit alignment. SPECIFICATIONS Supply voltage: Consumption: Strobe type: Strobe flash: Sensor input: Sensor supply: Contact type: Contact rating: Contact delay: LED indication: Electronics temp.: Enclosure rating: Encl. material: Encl. mount: Encl. rotation: Conduit entrance: Classification: Certificate: CE compliance: 2.8" (71mm) 120/ Hz..25 A 10_1: N/a 10_2: Xenon tube 10_1: N/a 10_2: 1 per second (1) four-wire flow switch 24 VDC, 50 ma (1) SPDT relay A 0-60 seconds Sensor, power and relay status F: -40 to 158 C: -40 to 70 NEMA 4X (IP) 10_1: PP, UL94VO 10_2: PP, UL94VO and polycarbonate 100_: 3/4" NPT 105_: 3/4" Rp 300 swivel base Single, 1/2" NPT General purpose CSA: LR EN EMC EN safety Controller 1.0" (25mm) LC " (119mm) 3.2" (81mm) IP Controller Enclosure mount 0 3/4" NPT (US) 5 3/4" Rp (Metric) Configuration (1) (2) (3) 1 Controller only 2 Controller with Strobe Alert LC30-10 Ordering Notes 1) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: LC E). 2) To order the CE configuration, place CE at the end of the P/N: (ie: LC CE). 3) For a liquid tight cable connection, order the LM connector. 68 Tel: levelsolutions@flowline.com

69 Flow Switch Remote Relay Controller Flow Switches LC APPLICATION The general purpose controller is offered in two versions with 1 or 2 relays and 1-2 sensor inputs. The LC80 provides single channel low flow switch automation with one sensor input. The LC82 provides dual channel low flow switch automation with two sensor inputs. Package the controller with our liquid or gas flow switch sensors on page. LM FEATURES Fail-safe remote relay control of pumps and valves with 0-60 second time delay Easy setup with LED indicators for sensor, power and relay status 35 mm DIN rail mount PP enclosure with removable terminal strips SPECIFICATIONS Supply voltage: Consumption: Sensor inputs: Sensor supply: Contact type: Contact rating: Contact latch: Contact delay: LED indication: Electronics temp.: Enclosure type: Encl. material: Classification: Certificate: CE compliance: STANDARD CONTROLLER P OWER 120/ Hz. 5 watts max. LC80: (1) four-wire flow switch LC82: (2) four-wire flow switches 24 VDC, 50 ma LC80: (1) SPDT relay LC82: (2) SPDT relays A LC80: N/a LC82: Select ON/OFF 0-60 seconds Sensor, power and relay status F: -40 to 158 C: -40 to mm DIN rail PP, UL94VO General purpose CSA: LR EN EMC EN safety 3.9" (98mm) INVERT DELAY INVERT DELAY RELAY 1 RELAY 2 LATCH INPUT 1 INPUT 2A ON OFF INPUT 2B 35mm DIN Rail 1.8" (44mm) 2.7" (68mm) Controller Contact(s) / input(s) (1) (2) (3) (4) 0 1 SPDT relay / 1 sensor 2 2 SPDT relays / 2 sensors Flow Switches Package the controller with our liquid or gas flow switch sensors. See page for more details. LC " (79mm) 3.6" (92mm) Ordering Notes 1) Select the best configuration based upon your control requirements. The following are the typical applications for each type: LC80: Single low flow switch LC82: Dual low flow switch 2) To factory configure for 240 VAC, place an E at the end of the P/N: (ie: LC E). 3) To order the CE configuration, place CE at the end of the P/N: (ie: LC CE). 4) For field mount installation in a NEMA 4X polycarbonate windowed enclosure, order the LM (single controller box) or the LM (two controller box). Fax:

70 Reference Part Number by Page Index 70 Tel: AG AG E AG AG E AG AG CE AG CE-E AG E AG AG CE AG CE-E AG E AG AG E AG AG E AG AG CE AG CE-E AG E AG AG CE AG CE-E AG E AG AG E AG AG E AG AG CE AG CE-E AG E AG AG CE AG CE-E AG E AG AG E AG Page Number Part Number Part Number AT CE-E AT E AT AT E AT AT E AT AT CE AT CE-E AT E AT AT CE AT CE-E AT E AT AT E AT AT E AT AT CE AT CE-E AT E AT AT CE AT CE-E AT E AT AT AT AT AT AT AT AT AU AU E AU AU E AU Page Number Part Number AG E AG AG CE AG CE-E AG E AG AG CE AG CE-E AG E AG AG AG AG AG AG AG AG AT AT E AT AT E AT AT CE AT CE-E AT E AT AT CE AT CE-E AT E AT AT E AT AT E AT AT CE AT CE-E AT E AT AT CE Page Number

71 Part Number by Page Index Reference Part Number Page Number Part Number Page Number Part Number Page Number AU CE 48 AU AV E AU CE-E 48 AU CE AV AU E 48 AU CE-E AV CE AU AU E AV CE-E AU CE 48 AU AV E AU CE-E 48 AU AV AU E 48 AU AV E AU AU AV AU E 48 AU , 47 AV E AU AU , 47 AV AU E 48 AU , 41 AV CE AU AU , 41 AV CE-E AU CE 48 AU , 47 AV E AU CE-E 48 AU , 47 AV AU E 48 AU , 39 AV CE AU AU CE 38, 39 AV CE-E AU CE 48 AU CE-E 38, 39 AV E AU CE-E 48 AU E 38, 39 AV , 47 AU E AU , 39 AV , 47 AU AU CE 38, 39 AV , 41 AU E AU CE-E 38, 39 AV , 41 AU AU E 38, 39 AV , 47 AU E AU , 39 AV , 47 AU AU E 38, 39 AV16-S443-A-B 42, 43 AU CE AU , 39 AV , 39 AU CE-E AU E 38, 39 AV CE 38, 39 AU E AU , 41 AV CE-E 38, 39 AU AU , 41 AV E 38, 39 AU CE AU , 41 AV , 39 AU CE-E AU , 41 AV CE 38, 39 AU E AU , 41 AV CE-E 38, 39 AU AU , 41 AV E 38, 39 AU E AV AV , 39 AU AV E AV E 38, 39 AU E AV AV , 39 AU AV E AV E 38, 39 AU CE AV AV , 41 AU CE-E AV CE AV , 41 AU E AV CE-E AV26-S443-A-B-C 42, 43 Fax:

72 Reference Part Number by Page Index Part Number Page Number Part Number Page Number Part Number Page Number AV , 41 AZ CE-E 38, 39 FT ' AV , 41 AZ E 38, 39 FT ' AV36-S443-A-B-C-D 42, 43 AZ , 39 FT AV , 41 AZ CE 38, 39 FT ' AV , 41 AZ CE-E 38, 39 FT ' AV46-S443-A-B-C-D-E 42, 43 AZ E 38, 39 FT AV56-S443-A-B-C-D-E-F 42, 43 AZ , 39 FT AZ AZ E 38, 39 GT AZ E 48 AZ , 39 GT ' AZ AZ E 38, 39 GT ' AZ E 48 AZ , 41 GT AZ AZ , 41 GT ' AZ CE 48 AZ , 41 GT ' AZ CE-E 48 AZ , 41 GT AZ E 48 AZ , 41 GT ' AZ AZ , 41 GT ' AZ CE 48 DL , 15 GT AZ CE-E 48 DL , 15 GT ' AZ E 48 DL , 15 GT ' AZ DL , 15 GT AZ E FT GT ' AZ FT ' GT ' AZ E FT ' GT AZ FT GT ' AZ CE FT ' GT ' AZ CE-E FT ' GT AZ E FT GT ' AZ FT ' GT ' AZ CE FT ' GT AZ CE-E FT GT ' AZ E FT ' GT ' AZ FT ' LB , 21 AZ FT LC AZ , 47 FT ' LC AZ , 47 FT ' LC AZ , 41 FT LC AZ , 41 FT LC AZ , 39 FT LC AZ CE 38, 39 FT LC CE Tel:

73 Reference Part Number by Page Index 73 Fax: Part Number LC E LC LC CE LC CE-E LC E LC LC CE LC CE-E LC E LC LC CE LC CE-E LC E LC LC CE LC CE-E LC E LC LC CE LC CE-E LC E LC LC CE LC CE-E LC E LC LC CE LC CE-E LC E LC LC LD30-S001 LD30-S201 LD30-S401 LD30-S011 LD30-S211 LD30-S411 LD31-S001 LD31-S101 Page Number Part Number LC CE-E LC E LC LC E LC LC E LC LC CE LC CE-E LC E LC LC E LC LC CE LC CE-E LC E LC LC E LC LC CE LC CE-E LC E LC LC E LC LC CE LC CE-E LC E LC LC E LC LC CE LC CE-E LC E LC LC E LC LC CE LC CE-E Page Number Part Number LD31-S201 LD31-S301 LD31-T001 LD31-T101 LD31-T201 LD31-T301 LD32-S001 LD32-S101 LD32-S201 LD32-S301 LD32-T001 LD32-T101 LD32-T201 LD32-T301 LD LD LH LH35-S201 LI LI LI LI LI LI LI LI LI LI LM LM LM LM LM LM LM LM LM LM LM Page Number ,

74 Reference Part Number by Page Index Part Number Page Number Part Number Page Number Part Number Page Number LM LO ' 53 LU ' 50 LM LO ' 53 LU ' 50 LM LO LU LM LO ' 53 LU ' 50 LM LO ' 53 LU ' 50 LM LO LU LM LO ' 53 LU ' 50 LM LO ' 53 LU ' 50 LM LO LU LM LO ' 53 LU ' 50 LM LO ' 53 LU ' 50 LM LP LU LM LP LU ' 50 LM LP ' 54 LU ' 50 LM LP LU IS 20, 21 LM LP ' 54 LU IS 20, 21 LM LP ' 54 LU , 27 LM /4 61 LP LU , 27 LM LP ' 55 LU , 27 LM LP ' 55 LU , 27 LM LP LU , 27 LM LP ' 55 LU , 27 LM LP ' 55 LU LM LP LU LM LP ' 55 LU LM LP ' 55 LU LO LP LU , 37 LO ' 53 LP LU , 37 LO ' 53 LP LU , 37 LO LU LU , 37 LO ' 53 LU ' 50 LU , 25 LO ' 53 LU ' 50 LU , 25 LO LU LU , 25 LO ' 53 LU ' 50 LU , 25 LO ' 53 LU ' 50 LU , 25 LO LU LU , 25 LO ' 53 LU ' 50 LV LO ' 53 LU ' 50 LV ' 52 LO LU LV ' Tel:

75 Part Number by Page Index Reference Part Number LV LV ' LV ' LV LV ' LV ' LV LV ' LV ' LV LV ' LV ' LV LV LV LV LV LV LV LV LV LV LZ LZ LZ ' LZ LZ ' LZ ' Page Number Subject to change without notice Fax:

76 Reference Notes 76 Tel:

77 Notes Reference Fax:

78 Reference Notes 78 Tel:

79 Notes Reference Fax:

80