CATALOGUE G03-MINI-ITX-AD-F V8.0

Transcription

1 CATALOGUE G03-MINI-ITX-AD-F V AD2COM-PB AD4COMB-PB AD4COM-PB AD1RTLANP-LF / AD1RTLANG-LF AD3RTLANP-LF / AD3RTLANG-LF ADPCM2-PB / ADPCM-PB ADCF AD12VC-PB AD7DLV-LF AD7LVCOM-PB ADPE4S-PB AD9CRT2LAN-PB AD9CRT4C2L-PB AD9LV4COM-PB AD9DHDMI-PB AD8DVI-PB AD3INLANG-PB AD1INLANG-LF AD8TV-PB ADMPCIA-PB AD12VD-PB AD4COMC1-LF AD4COMCB-LF ADE24LV-LF ADX24LV4C-LF ADMPEOX4CA ADMPEISLA ADMPEIDLA ADMPEASU3A ADMPEASS3A... 69

2 AD2COM-PB Mini-ITX Two serial ports Adapter Dimension: 75 x 82 mm Chipset: FINTEK F71805F Features: Two high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K Connectors: 2 serial ports (COM3 & COM4) 1

3 AD4COMB-PB Four serial ports Adapter Features: Four high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K Support RS422/485 function Connectors: 4 serial ports (COM3, COM4, COM5 &COM6) Cable: Two COM port Connector Cable for connect COM_5 & COM_6 Headers and COM port Connectors 2

4 Part I.PIN DEFINITION 1. COM3&COM4 2.COM5&COM6 Pin1P Pin6 Pin1 Pin6 i COM5 COM6 Pin Definition for COM3&COM4&COM5&COM6 Pin No. Pin Definition Pin No. Pin Definition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND 3

5 3. JP5&JP2 Pin1 Pin2 Pin1 Pin2 JP5 JP2 Pin Definition for JP5&JP2 when RS422 Selected Pin No. Pin Definition Pin No. Pin Definition 1 TXDP 2 TXDN 3 RXDP 4 RXDN Pin Definition for JP5&JP2 when RS485 Selected Pin No. Pin Definition Pin No. Pin Definition 1 DATAP 2 DATAN 4

6 Part II Jumper setting to select RS 232/ RS 485/ RS 422 Function JP6&JP4 is used to select RS 232/RS 485/ RS 422 Function for COM5&JP5 JP3&JP1 is used to select RS 232/RS 485/ RS 422 Function for COM6&JP2 1-2:RS :RS :RS422 JP6/JP3 Pin1 JP6 Pin1 JP3 JP4 JP1 1-2:RS :+12V 5-6:+5V JP1/JP4 I.Pin1&Pin2 in both JP6& JP4 closed to select RS232 for COM5, Or Pin1&Pin2 in both JP3&JP1 closed to select RS232 for COM6. II.Pin3&Pin4 in JP6/JP3 closed to select RS485 Function for JP5 or JP2, Pin3&Pin4 in JP4 /JP1closed to Enabled +12V for JP5 or JP2 III.Pin5&Pin6 in JP6/JP3 closed to select RS422 Function for JP5 or JP2, Pin5&Pin6 in JP4/JP1 closed to Enabled +5V for JP5 or JP2 Flow Control: RS485 Control by RTS signal. Programmer should set RTS signal high before sending data. 5

7 AD4COM-PB Mini-ITX Four serial ports Adapter Dimension: 92 x 82 mm Chipset: FINTEK F81216DG Features: Four high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K Connectors: 4 serial ports (COM3, COM4, COM5 &COM6) Cable: Two COM port Connector Cable for connect COM_5 & COM_6 Headers and COM port Connectors 6

8 AD1RTLANP-LF / AD1RTLANG-LF Mini-ITX LAN port Adapter Dimension: 75 x 82 mm Chipset: RealTek RTL8110S Giga-LAN for ADRTLAN-G RealTek RTL8100C 10/100-LAN for ADRTLAN-P Features: Integrated 10/100 transceiver for ADRTLAN-P Integrated 10/100/1000 transceiver for ADRTLAN-G Supports PVI rev:2.3, 32bit, 33/66MHz Supports Full Duplex flow control (IEEE 802.3x) Fully compliant with IEEE 802.3, IEEEE802.3u, IEEE802.3ab Connectors: one RJ45 LAN connector 7

9 AD3RTLANP-LF / AD3RTLANG-LF Mini-ITX three LAN ports Adapter Dimension: 75 x 82 mm Chipset: RealTek RTL8110S Giga-LAN for AD3RTLAN-G RealTek RTL8100C 10/100-LAN for AD3RTLAN-P Features: Integrated 10/100 transceiver for AD3RTLAN-P Integrated 10/100/1000 transceiver for AD3RTLAN-G Supports PVI rev:2.3, 32bit, 33/66MHz Supports Full Duplex flow control (IEEE 802.3x) Fully compliant with IEEE 802.3, IEEEE802.3u, IEEE802.3ab Connectors: three RJ45 LAN connectors ATTENTION: Only suitable driver installed, these models (AD1RTLANG, AD1RTLANP, AD3RTLANP, and ADPE4S) can work properly. 8

10 ADPCM2-PB / ADPCM-PB Mini-ITX PCMCIA/ CF Adapter ADPCM ADPCM2 Dimension: 90 x 82 mm Chipset: RICOH R5C486 PCI-CARDBUS BRIDGE Features: - Support one 16-bit (PCMCIA2.1/ JEIDA4.2) card socket and one CF(Compact Flash) socket - PC 2001 Design Guide Compliant - Compliant with PC card Standard Release 8.0 Specification - 5 programmable memory windows and 2 programmable I/O windows - Compliant with i82365sl compatible register set/ ExCA - Power decreased by the improvement of Power Management - Compliant with PVI Local Bus Specification Plug and Play support 9

11 ADCF Mini-ITX Compact Flash Adapter Dimension: 75 x 82 mm - Replacement for 3.5" hard disk drives - Bootable device - Behaves like an IDE disk, no special drivers required - Plugs directly onto a 40 pin IDE connector - Uses a floppy power connector - Jumper configuration: master - Not recommended for high vibration environments - Jumper Setting: JP1 2-3 closed: CF power by 5V 4-5 closed: CF power by 3.3V 1-2 closed reserve (no function) 10

12 AD12VC-PB 12V Mini-ITX Power supply Dimension: 160 x 45 mm -100 Watt DC-DC power supply - ATX standard compliant - 12V operation - 100% silent, small footprint - Plugs directly into the motherboard ATX connector 11

13 AD7DLV-LF Mini-ITX 24-bit LVDS Panel Interface &DVI Port Adapt (For J7F2W Series) Dimension: 92 x 82 mm Function: - LVDS Panel Controller and DVI Connector - VIA VT6136 Chip Supporting LVDS Signal for LVDS Panel -VIA VT6132A Supporting DVI digital signal Output 12

14 VCC VCC GND GND Backlight GND Brightness 1. Inverter: LVDS Inverter headers Pin 1 and pin2: VCC of inverter Pin3 pin4 and pin6: GND Pin5: Backlight Pin7: Brightness Pin 1 2. LCD (32 Pin): 24-bit LVDS header Pin 2 Pin 1 24-bit LVDS Header 13

15 32 Pin Definition Pin No. Pin Definition Pin No. Pin Definition 1 TXE3-2 TXE3+ 3 TXEC- 4 TXEC+ 5 TXE2-6 TXE2+ 7 TXE1-8 TXE1+ 9 TXE0-10 TXE0+ 11 GND 12 GND 13 GND 14 GND 15 GND 16 GND 17 TXO3+ 18 TXO3-19 TXOC+ 20 TXOC- 21 TXO2+ 22 TXO2-23 TXO1+ 24 TXO1-25 TXO0+ 26 TXO0-27 Pannel_VCC 28 Pannel_VCC 29 Pannel_VCC 30 Pannel_VCC 31 GND 32 GND 4. JP1: LVDS 5V/3.3V Function setting (3-pin) JP1 1 3 JP closed: PVDD= 5V 2-3 closed : PVDD= 3.3V 14

16 5. JP2: Panel backlight power on/off (3-pin) JP2 1 3 JP closed: backlight off 2-3 closed : backlight on 15

17 AD7LVCOM-PB Mini-ITX 24-bit LVDS Panel Interface & COM Ports Adapt (For J7F2W Series) Dimension: 92 x 82 mm Function: - 24-bit LVDS Panel Controller and Serial Port - VIA VT6136 Chip Supporting LVDS Signal for LVDS Panel Chipset: FINTEK F71805F Features: Two high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K Connectors: 2 serial ports (COM3 & COM4) 16

18 1. Inverter: Inverter Control Signal connector Pin#1&Pin#2: +12V Pin#3, Pin#4 &Pin#6: GND Pni#5: LCD Back Light ON/OFF Control Pin#7: LCD Panel Brightness Control Pin 1 +12V +12V GND GND Backlight GND Pin 7 Brights Inverter Connector 2. JP1: LVDS 5V/3.3V Function setting (3-pin) 1-2 closed: +5V Panel Signal Voltage 2-3 closed: +3.3V Panel Signal Voltage JP1 3 1 JP closed: PVDD= 5V 2-3 closed : PVDD= 3.3V 17

19 3. JP2 (only for PCB ver: 0.2): Panel backlight power on/off (3-pin) 1-2 closed: OFF 2-3 closed: ON JP2 1 3 JP closed: backlight off 2-3 closed : backlight on Note: JP2 only for PCB rev: 0.2 please check the character which below the COM4 connector it has V:0.2, if it is V:0.1 did not have JP2 connector 4. LCD (32 Pin): 24-bit LVDS header 2, 4, 6, 8, Pin 1 1, 3, 5, 7, bit LVDS Header 18

20 1. 32 Pin Definition Pin No. Pin Definition Pin No. Pin Definition 1 TXE3-2 TXE3+ 3 TXEC- 4 TXEC+ 5 TXE2-6 TXE2+ 7 TXE1-8 TXE1+ 9 TXE0-10 TXE0+ 11 GND 12 GND 13 GND 14 GND 15 GND 16 GND 17 TXO3+ 18 TXO3-19 TXOC+ 20 TXOC- 21 TXO2+ 22 TXO2-23 TXO1+ 24 TXO1-25 TXO0+ 26 TXO0-27 Pannel_VCC 28 Pannel_VCC 29 Pannel_VCC 30 Pannel_VCC 31 GND 32 GND 19

21 ADPE4S-PB Raid Setting: A. Motherboard: The IPC board with the 120-pin connector. B. Daughter card: ADPE4S, SATA connector, support Raid. Process: 1. Make the Raid Driver Floppy Disk. The floppy disk, CD, USB flash disk is ok when the operating system is Vista. 20

22 2.Boot-strap, when the following picture appears. 3. Press Ctrl+M key in to BIOS Setup interface. 4. Setting Raid mode, as follows. 21

23 5. Quit after save it when the Windows installation interface appears, as follows 6. Press F6 before Press F6 if you need to install a third party SCSI or RAID driver appears, then following interface will appear. It is no need pressing F6, just install driver in the Finding HDD interface when the operating system is Vista. 22

24 7. Press the key of S, input the floppy disk. 8. Choose the Marvell 61xx SATA Controller 32bit Drive or Marvell 61xx SATA Controller 64bit Driver according the uses driver floppy disk program. 23

25 AD9CRT2LAN-PB Feature: Support Intel secondly VGA port. Support Two RealTek Giga-LAN port. Ports: Two RJ45 LAN and one VGA port. 24

26 AD9CRT4C2L-PB Feature: Support Intel secondly VGA port. Support Two RealTek Giga-LAN port. Support Three RS-232 serial ports. Support One RS-232/422/485 serial ports. Port: Two RJ45 LAN and one VGA Port. Connectors: 4 serial ports (COM1, COM2, COM3 &COM4(TX-RXCOM4)) 25

27 Part I.PIN DEFINITION 1.COM1, COM2, COM3, COM4 COM2 COM1 COM3 COM4 Pin6 P i Pin6 Pin6 Pin1 Pin6 Pin1 Pin1 Pin1 COM1 COM2 COM3 COM4 in Definition for COM1&COM2&COM3&COM4 Pin No. Pin Definition Pin No. Pin Definition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND P 26

28 TXDP RXDP TXDN RXDN 2. TX-RXCOM4: RS-422 or RS485 TX-RXCOM4 TX-RXCOM4 Pin 1 2 RS422/485 Header 3. JCOMP4: RS232 Power Function Select JCOMP4 1-2 closed: RS closed : +12V closed : +5V 27

29 4. JCOM4: RS232, RS485, RS422 Function select JCOM4 1-2 closed: RS closed : RS closed : RS JCOMP3: RS232 Power Function Select JCOMP3 1-2 closed: RS closed : +12V closed : +5V 28

30 AD9LV4COM-PB Feature: Support Intel secondly LVDS port. Support Three RS-232 serial ports. Support One RS-232/422/485 serial ports. 29

31 1. LVDS1 Headers: LVDS1 LVDS1 LVDS1 Header Pin 1 Pin 2 Pin Number Pin Define Pin Number Pin Define Pin 1 LVDSB_DATA3- Pin 2 LVDSB_DATA3+ Pin 3 LVDSB_CLK- Pin 4 LVDSB_CLK+ Pin 5 LVDSB_DATA2- Pin 6 LVDSB_DATA2+ Pin 7 LVDSB_DATA1- Pin 8 LVDSB_DATA1+ Pin 9 LVDSB_DATA0- Pin 10 LVDSB_DATA0+ Pin 11 DDC DATA Pin 12 DDC CLOCK Pin 13 Ground Pin 14 Ground Pin 15 Ground Pin 16 Ground Pin 17 LVDSA_DATA3+ Pin 18 LVDSA_DATA3- Pin 19 LVDSA_CLK+ Pin 20 LVDSA_CLK- 30

32 Pin 21 LVDSA_DATA2+ Pin 22 LVDSA_DATA2- Pin 23 LVDSA_DATA1+ Pin 24 LVDSA_DATA1- Pin 25 LVDSA_DATA0+ Pin 26 LVDSA_DATA0- Pin 27 PVDD Pin 28 PVDD Pin 29 PVDD Pin 30 PVDD Pin 31 Ground Pin 32 Ground 2. Pin definition for COM1, COM2, COM3, COM4 COM1&COM2 Pin No. Pin Definition Pin No. Pin Definition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND 31

33 Pin6 P i COM4 Pin1 Pin6 COM3 Pin1 2. JP1: LVDS1 5V/3.3V Function setting (3-pin) 1-2 closed: Panel PVDD +5V Voltage 2-3 closed: Panel PVDD +3.3V Voltage JP1 JP closed: PVDD= 5V 2-3 closed : PVDD= 3.3V 32

34 2. JP2: Inverter1 VCC 12V/5V Function setting (3-pin) JP2 JP closed: INVERTER 12V 2-3 closed : INVERTER 5V 3. JCOMP3: RS232 Power Function Select JCOMP3 1-2 closed: RS closed : +12V closed : +5V 33

35 4. JCOMP4: RS232 Power Function Select JCOMP4 1-2 closed: RS closed : +12V closed : +5V 5. JCOM4: RS232, RS485, RS422 Function select JCOM4 1-2 closed: RS closed : closed :

36 VCC VCC GND GND Backlight GND Brightnes sss TXDP RXDP TXDN RXDN 6. TX-RXCOM4: RS422/485 Header TX-RXCOM4 Pin 1 2 RX-TXCOM4 RS422/485 Header 7. Inverter1: Pin-headers of LVDS Inverter Pin 1 and pin2: VCC of inverter Pin3 pin4 and pin6: GND Pin5: Backlight Pin7: Brightness Pin 1 35

37 AD9DHDMI-PB Feature: Support Intel DVI or HDMI port. Port: One DVI Port One HDMI Port 36

38 AD8DVI-PB DVI-D Features: Support VIA VX800 series only. Connector: 1*DVI-D port. 37

39 AD3INLANG-PB Giga LAN Connectors Feature Integrated for 10/100/1000 Mb/s full-and half-duplex operation. Wake on LAN * 3 support. Low-latency transmit and receive queues. Connector: Giga LAN Port x 3 38

40 AD1INLANG-LF Specifications Onboard Intel PI PCI Giga LAN * 1 Feature 1. Onboard Intel PI PCI Giga LAN * 1 2. Integrated for 10/100/1000 Mb/s full-and half-duplex operation 3. Wake on LAN * 1 support 4. Low-latency transmit and receive queues Application 1. Firewall Interface Jetway extend daughter card 39

41 AD8TV-PB RCA Video-out Connector S-Video Connector HDTV Connector VGA Connector Features: Support VIA VX800 IC series only. Connector: 1*VGA port; 1*HDTV connector; 1*S-Video connector; 1*RCA Video connector. 40

42 ADMPCIA-PB Mini-PCI Slot Slot: 1* mini-pci slot. 41

43 AD12VD-PB(120W DC/DC power module) Function: 12Vdc input to ATX standard power supply. Input characteristics 42

44 Range: 12 Vdc +- 5%. Current Max: 10A (max). Output characteristics Regulation Ripple Ripple & Noise Voltage load range min max max (mv) max (mv) Min Max +12V 0.5A 4A -5% +5% V 0.1A 1A -5% +5% 150 5V 0.1A 8A -5% +5% V 1A 10A -5% +5% VSB 1A 2A -5% +5% V NA NA NA NA NA NA Environment Operation temp. : 0-40 C. Operation Relative Humidity: 20% - 90%. Storage temp. : C. Storage Relative Humidity: 5% - 95%. Vibration: 0.38mm; 5-55Hz. Demission: 4X10 cm. 43

45 AD4COMC1-LF Dimension: 76 * 82 mm Chipset: FINTEK F81216 Features: Four high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K All of RS232s support powered function ( pin 9 ) Connectors: 4 serial ports (COM3, COM4, COM5 &COM6) Cable: Two COM port Connector Cable for connect COM_5 & COM_6 headers and COM port Connectors IPC M/B Support: For All Series with Embedded PCI 100-Pin Adapter Conn. 44

46 AD4COMCB-LF Dimension: 76 * 82 mm Chipset: FINTEK F81216 Features: Four high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K All of RS232s support powered function ( pin 9 ) Support RS422/485 function Connectors: 4 serial ports (COM3, COM4, COM5 &COM6) Cable: Two COM port Connector Cable for connect COM_5 & COM_6 headers and COM port Connectors IPC M/B Support: For All Series with Embedded PCI 100-Pin Adapter Conn. 45

47 ADE24LV-LF Feature Support 18 bit Single CH to 24 bit Single CH LVDS Interface Jetway extend daughter card Application Support 24 bit Single CH LVDS Panel Display Jetway NC94FL & NC96FL & NF96FL series M/B supported 46

48 1. LVDS1 pin header : Pin 1 connect to M/B Pin 2 Pin Number Pin Define Pin Number Pin Define Pin 1 NC Pin 2 NC Pin 3 NC Pin 4 NC Pin 5 NC Pin 6 NC Pin 7 NC Pin 8 NC Pin 9 NC Pin 10 NC Pin 11 DDC_CLK Pin 12 DDC_DATA Pin 13 Ground Pin 14 Ground Pin 15 Ground Pin 16 Ground Pin 17 NC Pin 18 NC Pin 19 LVDS_CLK1 Pin 20 LVDS_CLK+ Pin 21 LVDSA_DATA2- Pin 22 LVDSA_DATA2+ Pin 23 LVDSA_DATA1- Pin 24 LVDSA_DATA1+ Pin 25 LVDSA_DATA0- Pin 26 LVDSA_DATA0+ Pin 27 PVDD Pin 28 PVDD Pin 29 PVDD Pin 30 PVDD Pin 31 Ground Pin 32 Ground 47

49 2. LVDS2 pin header : Pin 1 connect to panel Pin 2 Pin Number Pin Define Pin Number Pin Define Pin 1 NC Pin 2 NC Pin 3 NC Pin 4 NC Pin 5 NC Pin 6 NC Pin 7 NC Pin 8 NC Pin 9 NC Pin 10 NC Pin 11 DDC_DATA Pin 12 DDC_CLK Pin 13 Ground Pin 14 Ground Pin 15 Ground Pin 16 Ground Pin 17 LVDSA_DATA3+ Pin 18 LVDSA_DATA3- Pin 19 LVDSA_CLK+ Pin 20 LVDSA_CLK- Pin 21 LVDSA_DATA2+ Pin 22 LVDSA_DATA2- Pin 23 LVDSA_DATA1+ Pin 24 LVDSA_DATA1- Pin 25 LVDSA_DATA0+ Pin 26 LVDSA_DATA0- Pin 27 PVDD Pin 28 PVDD Pin 29 PVDD Pin 30 PVDD Pin 31 Ground Pin 32 Ground 48

50 ADX24LV4C-LF Feature Support 18 bit Single CH to 24 bit Dual CH LVDS Support 18 bit Single CH to 2 * 24 bit Single CH LVDS Support 18 bit Single CH to 2 * 18 bit Single CH LVDS Support two RS-232 serial ports (External) Support two RS-232/422/485 serial ports (Internal) Four high-speed 16C550 compatible UART with 16-byte FIFOs Fully programmable serial-interface characteristics Baud rate up to 115.2K All of RS232s support powered function ( pin 9 ) Interface Jetway extend daughter card Application Support 24 bit Dual CH LVDS Panel Display Support 24 bit Single CH LVDS Panel Display Support 18 bit Single CH LVDS Panel Display Jetway NC9C & NF99 series M/B supported 49

51 COM PORT SETTING : 1. Pin definition for COM3, COM4, COM5, COM6 COM3 Port COM6 Header COM4 Port COM5 Header Pin No. Pin Definition Pin No. Pin Definition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND Pin6 P i COM6 Pin1 P i Pin6 COM5 COM3 & COM4 Pin1 50

52 2. COM3-T/ COM4-T/ COM5-T / COM6-T:RS232 Power Function Select COM3_T COM6_T COM4_T. COM5_T 1-2 closed: RS closed : +12V closed : +5V COM3-T/COM4_T/ COM5_T /COM6_T Jumper Setting 51

53 3. COM5_RS/COM6_RS: RS232, RS485, RS422 Function select COM6_RS. COM5_RS 1-2 closed: RS closed : closed : 422 COM5_RS/COM6_RS Function Select 52

54 4. COM5_DT/COM6_DT: RS422/485 Header COM5_DT 2 COM6_DT TXDN TXDP RXDN RXDP Pin 1 COM-5 DT/ COM-6 DT 53

55 LVDS SETTING: 1. LVDS1 pin header: Pin 2 Pin 1 Pin Number Pin Define Pin Number Pin Define Pin 1 LVDSB_DATA3- Pin 2 LVDSB_DATA3+ Pin 3 LVDSB_CLK- Pin 4 LVDSB_CLK+ Pin 5 LVDSB_DATA2- Pin 6 LVDSB_DATA2+ Pin 7 LVDSB_DATA1- Pin 8 LVDSB_DATA1+ Pin 9 LVDSB_DATA0- Pin 10 LVDSB_DATA0+ Pin 11 DDC DATA Pin 12 DDC CLOCK Pin 13 Ground Pin 14 Ground Pin 15 Ground Pin 16 Ground Pin 17 LVDSA_DATA3+ Pin 18 LVDSA_DATA3- Pin 19 LVDSA_CLK+ Pin 20 LVDSA_CLK- Pin 21 LVDSA_DATA2+ Pin 22 LVDSA_DATA2- Pin 23 LVDSA_DATA1+ Pin 24 LVDSA_DATA1- Pin 25 LVDSA_DATA0+ Pin 26 LVDSA_DATA0- Pin 27 PVDD Pin 28 PVDD Pin 29 PVDD Pin 30 PVDD Pin 31 Ground Pin 32 Ground 54

56 2. SW1 ( LVDS type setting): SW1 2 All Ope: 1-3 Close : Pin Clos: 5-6 Clos: SW1 Pin Close Status SW1 all open or 1-3 close : 1. LVDS support single or dual panel for 24 bit Single CH LVDS Panel Display. 2. Resolution depend on BIOS setting maximum to 1280*1024. SW1 3-4 close : LVDS support 24 bit Dual CH LVDS Panel Display SW1 5-6 close : LVDS support single or dual panel for 18 bit Single CH LVDS Panel Display. Resolution supported should be depends on Panel actual Specification ex. If panel resolution is 1280 * 1024 and need to display 800 * 480 resolutions, the display maybe not full screen; furthermore didn't display due to panel not support the resolution. ex. If panel resolution is 800 * 600 and need to display 1024 * 768 resolutions, the display maybe not full screen; furthermore didn't display due to panel not support such resolution. 55

57 ADMPEOX4CA Dimension: Chipset: Feature: Interface: Accessories: x mm OXFORD - OXPCIe954 serial port controller Support 3 * RS232 ports & 1* RS232/RS-422/RS-485 port Asynchronous baud rates up to 15Mbps Mini PCI-E 25cm COM cables W / Bracket * 2 sets ADMPEOX4CA Function Illustration 56

58 1. COM port pin header : CN1, CN2 Pin 11 Pin 1 Pin 10 Pin Number Pin Define Pin Number Pin Define Pin1 -DCD1 Pin11 -DSR1 Pin2 SIN1 Pin12 -RTS1 Pin3 SOUT1 Pin13 -CTS1 Pin4 -DTR1 Pin14 -RI1 Pin5 GND Pin15 Pin6 -DCD2 Pin16 -DSR2 Pin7 SIN2 Pin17 -RTS2 Pin8 SOUT2 Pin18 -CTS2 Pin9 -DTR2 Pin19 -RI2 Pin10 GND 2. RS485/RS422 : JP1 OXTX-RXCOM TXDN 2 RXDN TXDP RXDP Pin 1 OXTX-RXCOM 57

59 JP Close: 3-4 Close: 5-6 Close: Pin short RS short RS short RS422 MPEOX4CA support quad series port ( port0~3). port 3 support multi function with RS232/485/422 When RS485/422, must change Hardware configuration to RS485 and Buffer enable to active high Step1: Find the port3 device on the device management 58

60 Step2: 1. Hardware configuration change to RS422/ RS485 settings change to Active high 59

61 ADMPEISLA Dimension: Chipset: Feature: Specifications: Interface: Accessories: x mm Intel GbE LAN controller Compliant with the 1Gb/s IEEE802.3/802.3u/802.3ab Support Full duplex operation at 10/100/1000 Mb/s; Support Half duplex at 10/100 Mb/s; Wake on LAN function (Mini PCI-E slot provides + 3VSB power supported); Support PXE Boot function Support 1 * Giga Lan Mini PCI-E 25cm 16P to 16P cable * 1 pcs GigaLAN Bracket * 1 set 60

62 ADMPEISLA Function Illustration 61

63 ADMPEISLA pin header: LANCN Pin 2 Pin 1 Pin 15 Pin Number Pin Define Pin Number Pin Define Pin1 DD+ Pin2 3.3v power Pin3 DD- Pin4 3.3v power Pin5 DC+ Pin6 LAN2_1000- Pin7 DC- Pin8 LAN2_LINK_ACT- Pin9 DB+ Pin10 LAN2_100- Pin11 DB- Pin12 GND Pin13 DA+ Pin14 GND Pin15 DA- SLANCNA pin header: Pin Number Pin Define Pin Number Pin Define Pin1 DD+ Pin2 3.3v power Pin3 DD- Pin4 3.3v power Pin5 DC+ Pin6 LAN2_1000- Pin7 DC- Pin8 LAN2_LINK_ACT- Pin9 DB+ Pin10 LAN2_100- Pin11 DB- Pin12 GND Pin13 DA+ Pin14 GND Pin15 DA- 62

64 ADMPEIDLA Dimension: Chipset: Feature: Interface: Accessories: x mm Intel -i350 GbE LAN controller Compliant with the 1Gb/s IEEE802.3, 802.3u, 802.3ab specifications; Support Full duplex operation at 10/100/1000 Mb/s; Support Half duplex at 10/100 Mb/s; Support Wake on LAN function (Mini PCI-E slot provides + 3VSB power supported); Support PCI-E GEN1(2.5GT/s), GEN2(5GT/s) Support 2 * Giga Lan Mini PCI-E 25cm 16P to 16P cable * 2 pcs Two GigaLAN Bracket * 1 set 63

65 ADMPEIDLA Function Illustration 64

66 ADMPEIDLA pin header: LANCN1, LANCN2 Pin 2 Pin 1 Pin 15 LANCN1,LANCN2 : Pin Number Pin Define Pin Number Pin Define Pin1 DD+ Pin2 3.3v power Pin3 DD- Pin4 3.3v power Pin5 DC+ Pin6 LAN2_1000- Pin7 DC- Pin8 LAN2_LINK_ACT- Pin9 DB+ Pin10 LAN2_100- Pin11 DB- Pin12 GND Pin13 DA+ Pin14 GND Pin15 DA- DLANCNA pin header: Pin Number Pin Define Pin Number Pin Define Pin1 DD+ Pin2 3.3v power Pin3 DD- Pin4 3.3v power Pin5 DC+ Pin6 LAN2_1000- Pin7 DC- Pin8 LAN2_LINK_ACT- Pin9 DB+ Pin10 LAN2_100- Pin11 DB- Pin12 GND Pin13 DA+ Pin14 GND Pin15 DA- 65

67 ADMPEASU3A Dimension: x mm Chipset: ASMedia - ASM1042 USB Host controller Feature: Compliant with USB3.0 Specification Revision 1.0 ; Compliant with USB Specification Revision 2.0; Support PCI-E GEN1(2.5GT/s), GEN2(5GT/s) Support 2 * USB2.0/USB3.0 port Interface: Mini PCI-E Accessories: 25cm USB 3.0 cable W / Bracket * 1 set ADMPEASU3A Function Illustration 66

68 ADMASU3A pin header: USBCN1 Pin 11 Pin 10 Pin 1 Pin Number Pin Define Pin Number Pin Define Pin1 USB3B_VCC Pin19 USB3A_VCC Pin2 USB3B_SSRX- Pin18 USB3A_SSRX- Pin3 USB3B_SSRX+ Pin17 USB3A_SSRX+ Pin4 GND- Pin16 GND Pin5 USB3B_SSTX- Pin15 USB3A_SSTX- Pin6 USB3B_SSTX+ Pin14 USB3A_SSTX+ Pin7 GND Pin13 GND Pin8 USB2B_D- Pin12 USB2A_D- Pin9 USB2B_D+ Pin11 USB2A_D+ Pin10 USB_OCA 67

69 ATXPOWER_4P Pin 1 Pin1 Pin2 Pin3 Pin4 5VCC GND GND 12V 68

70 ADMPEASS3A Dimension: x mm Chipset: ASMedia - ASM1061 SATA 6Gbps controller Feature: Compliant with Serial ATA Revision3.0; Support PCI-E GEN1(2.5GT/s), GEN2(5GT/s) Support IDE/AHCI mode. Support 2 * SATA2/SATA3 Port Interface: Mini PCI-E Accessories: SATA3 50cm cable * 2 PCS ADMASS3A IDE/ACHI MODE SETTING: JP1 1-2 Close IDE mode Pin Close : AHCImode Pin 1 69