System Display and Controller

Size: px

Start display at page:

Download "System Display and Controller"

Annis Glenn
6 years ago
Views:

1 System Display and Controller

2 Contents Basic Navigation Menu Maps - MATE System Display and Controller Basic Setup. 2 MATE System Display and Controller Advanced Setup. 3 MATE System Display and Controller AGS Menu Inverter Setup Charge Controller Setup 8 FLEXnet DC Setup. 9-0 WARNING: SHOCK HAZARD Consult the MATE Owner s Manual for detailed information on safety and installation procedures Rev A.vsd\TOC\

The following pages are intended as a quick reference guide for the menu map of the MATE Series System Display and Controller. This document is for use with the products MATE and MATE2.

See the inverter, charge controller, and DC monitor manuals for detailed information about specific features and functions that are controlled by the menus.

3 The following pages are intended as a quick reference guide for the menu map of the MATE Series System Display and Controller. This document is for use with the products MATE and MATE2. It cannot be used with the MATE3. See the MATE Series Owner s Manual for detailed information about the menu structure, MATE features, and hot/soft key functions. See the inverter, charge controller, and DC monitor manuals for detailed information about specific features and functions that are controlled by the menus. AC IN LED AC IN Hot Key LCD Screen INV LED INV Hot Key Selection from Main Menu Main Screen choose device: FX MATE Main Menu Soft Keys Soft Key Color Code: Available menus Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. Select this option to proceed Adjusts the set points value BASIC NAVIGATION Soft Keys Device Selection Menu Device Menu Title(s) SETUP/FX Selects a function (e.g., ON, OFF, AUTO) Switches between devices on the ports of the Communications HUB Navigation colors AC IN Hot Key LCD Screen INV LED INV Hot Key Soft Keys Menu Item Setpoint or function for the Menu Item Port SETUP/FX/SEARCH------P0 6 SETUP/FX/SEARCH------P0 search sensitivity SETUP/FX/SEARCH search 6 sensitivity Navigation: Soft key functions will vary depending on the selected menu and are defined by the word above the key in the LCD. Indicates a -screen movement within a Menu. These are color coded according to their function or purpose. If accompanied by a dashed line, pressing that soft key will return the user to the location identified by the dashed line. This will vary depending on the devices in the system. To cycle through the devices connected to the HUB, press the <PORT> soft key Rev A.vsd\Menu Map Basics\ Page

4 Startup Screens Main Screen MAIN AC IN MAIN G'day Mate INV Setting up the MATE or MATE2 includes:. Setting the Clock (date and time) 2. Setting the screen contrast. 3. Setting the Glow time. 4. Setting how the Summary screens are displayed. 5. Setting communication options. 6. Setting Beep tone functions. SETUP choose device: FX MATE SETUP/MATE/PAGE mate code rev: 4..3 : CLOCK CNT GLOW PG2 SETUP/MATE/PAGE : PG SUMRY COMM PG3 Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. SETUP/MATE/PAGE : PG2 BEEP MAIN MATE (C)2009 OutBackPower Version Code a.a.a Serial #xxxxxxxx Screen EE b.bb Systems Searching for Devices FX Found Current Day Tu 0/0/09 INC SET DAY MONTH SETUP/MATE/CLOCK Tu /0/09 2:00:00P BACK DATE TIME Current Hour 2:00:00P INC SET HOUR 5 MIN SETUP/MATE/CNT contrast 30% BACK INC DEC SETUP/MATE/GLOW backlight controls BACK LEVEL MODE TIME SETUP/MATE/SUM/TYPE---- summary screen type BACK INC DEC SETUP/MATE/SUM summary control BACK TYPE DELAY ROLL Repolling SETUP/MATE/COMM Choose category: Searching for Devices BACK REPOLL PC DEBUG HUB Found SETUP/MATE/BEEP button beep tone ON BACK OFF ON Searching for Devices CC Found Searching for Devices DC Found Searching for Devices HUB Found Port Assignment > FX 2>CC 3> DC 4> 5> 6> 7> 8> 9> 0> 2M> Main Screen MAIN Current Month Tu 0/0/09 INC SET MONTH 2 DATE Current Date Tu 0/0/09 INC SET DATE 3 YEAR Current Year Tu 0/0/09 INC DEC YEAR YEAR 4 DONE Current Minute 2:00:00P 6 INC DEC RESET MIN MIN SEC DONE Setpoints (Current Day): Monday through Sunday Setpoints (Current Month): 0 through 2 Setpoints (Current Date): 0 through 3 Setpoints (Current Year): 09 through xx Setpoints (Current Hour): 0-2AM or 0-2PM Setpoints (Reset Sec): Resets seconds to 00 SETUP/MATE/GLOW/LEVEL backlight 00% BACK INC DEC SETUP/MATE/GLOW/MODE current code: AUTO BACK OFF AUTO ON SETUP/MATE/GLOW/TIME glow Off 5 mins time BACK INC DEC Setpoints: None Roll: rotates between devices FX Only CC Only DC Only DC Simple SETUP/MATE/SUM/DELAY- Sum screen 9 mins Delay time BACK INC DEC SETUP/MATE/SUM/DELAY- Sum screen 0 seconds Roll rate BACK INC DEC Port Assignment > FX 2>CC 3> DC 4> 5> 6> 7> 8> 9> 0> 2M> Varies depending on attached devices. Automatically returns to the Main Screen. SETUP/MATE/COMM/PC PC communications: OFF BACK OFF ON SETUP/MATE/COMM Comm errors: BACK VIEW RSET Viewing Comm Errors 00:000 0:000 02:000 03:000 04:025 05:00 06:00 07:00 08:00 09:00 0:00 2M:00 After Resetting Comm Errors 00:000 0:000 02:000 03:000 04:000 05:000 06:000 07:000 08:000 09:000 0:000 2M: Rev A.vsd\MATE Basic Setup\ Page 2

5 (continued) Resetting the MATE2 to Factory Defaults Charge Controller and FLEXnet DC Menus Changing more detailed operating parameters requires access to the Advanced Setup Menu. Accessing the Advanced Menu: Page Page 2 Page 3 ADV/MATE/PAGE HBX GRIDUSE AGS PG2 The AGS Menu is shown on the next page. ADV/MATE/PAGE : PG DEFAULTS PG3 ADV/MATE/PAGE advanced charger float control PG2 CC FN-DC PG4 ADV/MATE/HBX hbx-use 24.0 Vdc grid set point DOWN ADV INC DEC ADV/MATE/GRIDUSE griduse enable: OFF DOWN ADV OFF ON ADV/MATE/DEFAULT reset MATE to factory default RESET NO ADV/MATE/PG3/CC enable CC float coordination: Yes PG3 YES NO ADV MATE ADV/SETTINGS/WARNING changes made could adversely affect system performance ADV/MATE/HBX hbx-use.0 hrs grid delay INC DEC ADV/MATE/GRIDUSE weekday 2:00A griduse start time CHANGE WEEKDAY GRIDUSE START WEEKDAY GRIDUSE START ADV/MATE/DEFAULT Are you sure? YES NO ADV/MATE/PG3/FN-DC enable FN-DC charge termination: Yes PG3 YES NO ADV ADV/PASSOWRD ADV/MATE/HBX hbx-drop 26.0 Vdc grid set point INC DEC ADV/MATE/GRIDUSE weekday 2:00A griduse stop time CHANGE WEEKDAY GRIDUSE S WEEKDAY GRIDUSE S A B B A. Press the <INC> soft key until 4 is displayed on the LCD. 2. Press the <ENTER> soft key to accept the password and move forward to the Device Selection Menu. ADV/PASSOWRD ADV choose device FX CC DC MATE ADV/MATE/HBX hbx-drop.0 hrs grid delay INC DEC ADV/MATE/HBX ac input USE control CHANGE ADV/MATE/HBX ac input USE control DROP USE HBX DONE ADV/MATE/HBX end of hbx menu UP ADV ADV/MATE/GRIDUSE weekend 2:00A griduse start time CHANGE ADV/MATE/GRIDUSE weekend 2:00A griduse stop time CHANGE ADV/MATE/GRIDUSE end of griduse menu UP ADV WEEKEND GRIDUSE START WEEKEND GRIDUSE S WEEKEND GRIDUSE START WEEKEND GRIDUSE S Page 4 ADV/MATE/PG FN-DC advanced grid tie authority PG3 MODE ADV MAIN ADV/MATE/AGS/PG4/MODE-- FN-DC enable disabled PG4 IN DEC ADV Press and hold the 2 left soft keys at the same time. Release when the Main screen appears Rev A.vsd\MATE ADV Setup\ Page 3

6 (continued) ADV/MATE/PAGE HBX GRIDUSE AGS PG2 ADV/MATE/AGS : QUIET VOLT SETUP TIME START PG2 Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. Continued on the next page... ADV/MATE/AGS/SETUP ags port: DOWN AGS INC DEC ADV/MATE/AGS/QUIETTIME-- weekday 2:00A quiet time start CHANGE WEEKDAY QT START WEEKDAY QT START ADV/MATE/AGS/VSTART----- volt start 24.4 Vdc 24 hr setting DOWN AGS INC DEC MATE ADV/MATE/AGS/SETUP ags enabled: No NO YES ADV/MATE/AGS/QUIETTIME-- weekday 2:00A quiet time stop CHANGE WEEKDAY QT S WEEKDAY QT S ADV/MATE/AGS/VSTART----- volt start 23.6 Vdc 2 hr setting INC DEC ADV/MATE/AGS/SETUP ags control: MAN-OFF CHANGE GEN START CONTROL currently: MAN-OFF OFF AUTO ON OK ADV/MATE/AGS/VSTART----- volt start 22.0 Vdc 2 min setting INC DEC ADV/MATE/AGS/SETP dc genset: No NO YES ADV/MATE/AGS/SETUP Vdc genstop 38.0 Vdc INC DEC ADV/MATE/AGS/SETUP ags fault time 7 minutes INC DEC ADV/MATE/AGS/SETUP cool down time 0 minutes INC DEC ADV/MATE/AGS/SETUP warm up time 0 minutes INC DEC ADV/MATE/AGS/SETP end of AGS Setup menu UP AGS ADV/MATE/AGS/QUIETTIME-- weekend 2:00A quiet time start CHANGE ADV/MATE/AGS/QUIETTIME-- weekend 2:00A quiet time stop CHANGE ADV/MATE/AGE/QUIETTIME-- end of quiet time menu UP AGS WEEKEND QT START WEEKEND QT S WEEKEND QT START WEEKEND QT S ADV/MATE/AGE/QT end of VOLTAGE START menu UP AGS Rev A.vsd\MATE ADV Setup 2\ Page 4

7 (continued) Advanced Setup Menu (Continued) ADV/MATE/PAGE HBX GRIDUSE AGS PG2 ADV/MATE/AGS : QUIET VOLT SETUP TIME START PG2 ADV/MATE/AGS/PAGE %soc PG2 START TIMERS PG4 ADV/MATE/AGS/PAGE : PG3 EXERCISE ADV Continued from the previous page. ADV/MATE/AGS/PAGE LOAD MUST PG START RUN PG3 ADV/MATE/AGS/%SOC %SOC start 0% DOWN AGS INC DEC ADV/MATE/AGS/%SOC %SOC stop 90% INC DEC ags state 0 DOWN AGS agsgenfault 0 ADV/MATE/AGS/EX ex start day --- DOWN AGS INC DEC ADV/MATE/AGS/EX ex start time 2:00A MATE ADV/MATE/AGS/LS load start 0 kw DOWN AGS INC DEC ADV/MATE/AGS/MR weekday 2:00 A must run start time DOWN AGS CHANGE WEEKDAY MR START WEEKDAY MR START ADV/MATE/AGS/FULLCHG--- charge to 00% full every 5 days INC DEC 24 hr 440 min vs time INC DEC ADV/MATE/AGS/EX ex period 5 min ADV/MATE/AGS/LS load start min delay INC DEC ADV/MATE/AGS/MR weekday 2:00 A must run stop time CHANGE WEEKDAY MR S WEEKDAY MR S ADV/MATE/AGS/%SOC end of %SOC START Menu UP AGS 2 hr vs time 20 min INC DEC ADV/MATE/AGS/ES end of exercise Menu UP AGS ADV/MATE/AGS/LS load stop 0 kw INC DEC ADV/MATE/AGS/MR weekend 2:00 A must run start time CHANGE WEEKEND MR START WEEKEND MR START 2 min 2 min vs time ADV/MATE/AGS/LS load stop min delay INC DEC ADV/MATE/AGS/MR weekend 2:00 A must run stop time CHANGE WEEKEND MR S WEEKEND MR S lsstart timer 0 min Vdcstop timer 0 min ADV/MATE/AGE/LS end of LOAD START menu UP AGS ADV/MATE/AGE/MR end of MUST RUN menu UP AGS lsstop timer 0 min exstop timer 0 min end of TIMERS Menu UP AGS Rev A.vsd\MATE ADV Setup 3\ Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. Page 5

8 Setting up the basic Inverter functions includes:. Selecting the AC input (Grid or Gen). 2. Setting the Search function. Main Screen SETUP choose device: FX MATE SETUP/FX SRCH INPUT Changing more detailed operating parameters requires access to the Advanced Setup Menu. Accessing the Advanced Menu: ADV/SETTINGS/WARNING changes made could adversely affect system performance ADV/PASSOWRD A ADV/FX/INVERTER-----P0 search 6 sensitivity ADV/FX/INVERTER-----P0 search 8 pulse length ADV/FX/INVERTER-----P0 search 8 cycles pulse length Advanced Menu for Inverter (Page of 3) ADV/FX/PAGE ADV INV CHRG PG2 ADV/FX/INVERTER reset FX to factory defaults DOWN MORE Resetting the Inverter to Factory Defaults ADV/FX/INVERTER------P0 choose fx port then press next EXIT PORT NEXT NOTE: The values shown in this illustration will vary depending on the model of inverter. Continued on next page. charger 2.0Aac limit charger 2.0 Aac limit absorb 28.8 Vdc set point INVERTER SETUP/FX/SEARCH------P0 search 6 sensitivity SETUP/FX/SEARCH------P0 search 8 cycles pulse length SETUP/FX/INPUT P0 ac transfer control DOWN GRID GEN PORT SETUP/FX/INPUT Ac/grid 60.0 aac limit Setpoints: Grid Generator A B. Press the <INC> soft key until 4 is displayed on the LCD. 2. Press the <ENTER> soft key to accept the password and move forward to the Device Selection Menu. ADV/PASSOWRD ADV/FX/INVERTER------P0 search 60 cycles pulse spacing ADV/FX/INVERTER------P0 low battery 2.0 Vdc cutout set point ADV/FX/INVERTER------P0 press button Ready EXIT 2 ADV/FX/INVERTER------P0 press button 2 Ready EXIT 2 absorb.0 hrs time limit float 27.2 Vdc set point refloat 25.0 Vdc set point equalize 28.8 Vdc set point SETUP/FX/SEARCH------P0 search 60 cycles pulse spacing SETUP/FX/INPUT Ac2/gen 30.0 aac limit B ADV choose device FX CC DC MATE ADV/FX/INVERTER------P0 low battery 25.0 Vdc cutin set point ADV/FX/INVERTER------P0 press button 2 Done EXIT 2 float.0 hrs time limit equalize.0 hrs time limit SETUP/FX/SEARCH search setup completed SETUP MAIN SETUP/FX/INPUT Input setup completed SETUP MAIN ADV/FX/INVERTER------P0 adjust 20 Vac output voltage ADV/FX/INVERTER inverter programming completed ADV MAIN Main Screen charger programming completed ADV MAIN Rev A.vsd\INV Setup\ Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. Page 6

9 (continued) Advanced Inverter Setup Menu (continued) Continued from previous page. Page ADV/FX/PAGE ADV INV CHRG PG2 Page 3 ADV/FX/PAGE P0 PG2 AUX STACK PG4 Page 2 ADV/FX/PAGE P0 ADV GRID GEN PG3 aux output AUTO control stack -2PH Master phase Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. NOTE: The values shown in this illustration will vary depending on the model of inverter. ADV/FX/GRID P0 ac /grid 08 Vac lower limit ADV/FX/GEN P0 gen input 00.5 min connect delay aux output cool fan function stack Classic Slave phase Page 4 ADV/FX/GRID P0 ac /grid 40 Vac upper limit ADV/FX/GRID P0 ac /grid 48.0 Aac input limit ADV/FX/GEN P0 ac 2/gen 08 Vac lower limit ADV/FX/GEN P0 ac 2/gen 40.0 Aac upper limit genalert 22.0 Vdc on setpoint genalert 4 min on delay stack OB Slave L phase stack OB Slave L2 phase ADV/FX/SELL P0 sell re 23.6 Vdc volts ADV/FX/PAGE P0 PG3 SELL CAL MAIN ADV/FX/CALIBRATE-----P0 Vac input 20 vac adjustment INVERTER ADV/FX/GRID P0 ac /grid 6 cycles transfer delay ADV/FX/GEN P0 ac 2/gen 48.0 Aac input limit genalert 28.0 Vdc off set point vent fan off 5 min period stack 3PH Master phase ADV/FX/SELL P0 grid tie IEEE window DOWN IEEE USER PORT ADV/FX/CALIBRATE-----P0 Vac output 20 Vac adjustment ADV/FX/GRID P0 grid programming completed ADV MAIN ADV/FX/GEN P0 ac 2/gen 60 cycles transfer delay genalert 9 min off delay diversion 29.2 Vdc on set point stack 3 PH Slave phase power save level 0 slave adjust only ADV/FX/SELL P0 grid tie GRIDTIE authority DOWN IEEE USER PORT ADV/FX/CALIBRATE-----P0 battery Vdc 25.4 Vdc adjustment ADV/FX/GEN P0 ac 2/gen ON support loadshed 22.0 Vdc off set point diversion 30 sec off delay power save level 0 master adjust only stacking setup completed ADV MAIN ADV/FX/SELL P0 selling setup completed ADV MAIN ADV/FX/CALIBRATE-----P0 calibration setup completed ADV MAIN ADV/FX/GEN P0 gen programming completed ADV MAIN vent fan 26.0 Vdc on set point aux output setup completed ADV MAIN Rev A.vsd\INV Setup 2\ Page 7

10 Changing more detailed operating parameters requires access to the Advanced Setup Menu. Accessing the Advanced Menu: Advanced Menu for the FLEXmax Charge Controller (Page of 2) ADV/CC/PAGE ADV CHGR CCADV PG2 Advanced Menu for the FLEXmax Charge Controller (Page 2 of 2) ADV/CC/PAGE P02 PG EQ AUX MAIN ADV/SETTINGS/WARNING changes made could adversely affect system performance ADV/CC/CHGR P02 output current 80.0 A limit snooze mode <0.6 AMP Mpp range limit %VOC maximum 90% RTS compensation wide ADV/CC/EQ P02 eq voltage 28.8 VOC DOWN INC SETUP ADV ADV/CC/AUX P02 vent fan DOWN INC SET PORT ADV/PASSWORD ADV/CC/CHRG P02 absorb voltage 28.8 V wakeup mode VOC change 3.0 V MPP range limit % VOC minimum /2 RTS comp limit upper limit 28.2 Vdc ADV/CC/EQ P02 eq time hours DOWN INC SETUP ADV ADV/CC/AUX P02 aux control OFF DOWN ON OFF PORT A A B B. Press the <INC> soft key until 4 is displayed on the LCD. 2. Press the <ENTER> soft key to accept the password and move forward to the Device Selection Menu. ADV/PASSOWRD ADV choose device FX CC DC MATE ADV/CC/CHRG P02 float voltage 27.2 V ADV/FX/CHRG P02 end charger menu ADV MAIN wakeup mode time 5 minutes MPPT mode auto track grid tie mode nongt absorb time.0 hours absorb end amps 0A rebulk voltage 24.8 Vdc RTS comp limit lower limit 26.4 Vdc auto restart mode 0 AUX output polarity active ADV/CC/EQ P02 eq auto eq interval 0 days DOWN INC SETUP ADV ADV/CC/EQ P02 end CC eq menu ADV MAIN ADV/CC/aux P02 end of menu ADV MAIN CHARGE CONTROLLER park MPP 77.0% vbatt calibration 29.3 Vdc 0.0 Vdc Reset CC to factory defaults? DOWN YES NO PORT Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. end CC advanced menu ADV MAIN Rev A.vsd\CC Setup on MATE\ Page 8

11 STATUS/DC/PAGE Main Screen MAIN State-of-Charge Screen E F Battery Discharging State of Charge 00% Main Screen STATUS choose device: FX CC DC MAIN STATUS/DC/PAGE STATS METER SHUNT BATT PG2 Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. NOTE: The values shown in this illustration will vary depending on the model of inverter. PG AUX MAIN STATUS/DC/AUX aux control manual DOWN STATUS STATUS/DC/PAGE aux relay state: OFF UP STATUS Summary Screen # DC Now 25.4V 00% IN 0.4A 0.00kW OUT.6A 0.040kW BAT -.2A kW A: 0. A 0.00 kw B: 0.0 A kw C: 0.0 A kw DOWN STATUS STATUS/DC/SHUNT A max removed amps 0.9 RESET total days at 00% 0.5 RESET These screens are informational only. No changes can be made from this location in the Menu Map. Summary Screen #2 DC Today minsoc 97% In 247AH 2.84kWH Out 240AH 2.50kWH Bat 7AH 0.34kWH Summary Screen #3 FX Total 25.4V 97% Inverting 0.000kW AC Loads 0.000kW Buying $ 0.000kW Summary Screen #4 DC BAT 25.4V 00% Bat -0.3A -0.00kW Net 0.4AH 0.00kWH Days Since Full. Press this soft key to proceed. This screen will also automatically move forward after a userdefined period of time. A: - Ah 0.00 kwh B: 0 Ah kwh C: 0 Ah kwh METER/DC/SHUNT A removed 2 AH 0.6 kwh METER/DC/SHUNT A charged 2 AH 0.6 kwh METER/DC/SHUNT B removed 0 AH 0 kwh METER/DC/SHUNT B charged 2 AH 0.6 kwh METER/DC/SHUNT C removed 0 AH 0 kwh METER/DC/SHUNT C charged 0 AH 0.00 kwh METER/FN/METER DC firmware revision /040 METER/FN/METER end of meter menu UP STATUS STATUS/DC/SHUNT A max removed kwatts 0.00 RESET STATUS/DC/SHUNT A amps 0. RESET STATUS/DC/SHUNT A kwatts 0.29 RESET STATUS/DC/SHUNT B max removed amps 0 RESET STATUS/DC/SHUNT B amps 30.2 RESET STATUS/DC/SHUNT B amps 39.8 RESET STATUS/DC/SHUNT B kwatts RESET STATUS/DC/SHUNT C max removed amps 0 RESET STATUS/DC/SHUNT C amps 30.2 RESET STATUS/DC/SHUNT C amps 39.8 RESET STATUS/DC/SHUNT C kwatts RESET STATUS/DC/SHUNT end of shunt status menu UP STATUS days since charge parameters met 5.9 battery min today 24.8 Vdc RESET battery max today 25.4 Vdc RESET temp comp d batt setpoint 28.4 Vdc system battery temperature 29 C cycle charge factor 78% cycle kwhr charge efficiency 65% lifetime kah removed 5 RESET end of battery status menu UP STATUS FLEXnet DC Rev A.vsd\FNDC\ Page 9

12 (continued) Accessing the Advanced Menu: ADV/DC/PAGE ADV/DC/PG2 ADV/DC/PG P03 ADV BAT SHUNT PG2 PG CHARGE AUX PG3 PG2 RESET CLR MAIN ADV/SETTINGS/WARNING changes made could adversely affect system performance ADV/DC/BAT P03 battery capacity 0 amphours INC DEC ADV ADV/DC/SHUNT P03 shunt A mode enabled DOWN EN DIS ADV/DC/CHARGE return amps 0.4 currently MAN-OFF DOWN OFF AUTO ON ADV/DC/RESET P03 reset DC to factory defaults? NO YES ADV/DC/CLEAR clear data log memory? YES NO ADV/PASSWORD ADV/DC/SHUNT P03 shunt B mode enabled ADV/DC/CHARGE battery voltage 26.0 high volts 29.0 Vdc DOWN EN DIS ADV/PASSWORD ADV choose device ADV/DC/SHUNT P03 shunt C mode disabled DOWN EN DIS ADV/DC/CHARGE parameters met time minutes low volts 22.0 Vdc FX CC DC MATE ADV/DC/SHUNT P03 shunt setup complete ADV MAIN ADV/DC/CHARGE charge factor 93% SOC high 90% low set point delay minutes ADV/DC/CHARGE charge parameters complete ADV MAIN SOC low 59% invert logic YES DOWN YES NO Press and hold the 2 left soft keys at the same time. Release when the Main screen appears. NOTE: The values shown in this illustration will vary depending on the model of inverter. high set point delay minutes aux parameters complete ADV MAIN FLEXnet DC Rev A.vsd\FNDC Adv\ Page 0

13 About OutBack Power Technologies OutBack Power Technologies is a leader in advanced energy conversion technology. Our products include true sine wave inverter/chargers, maximum power point tracking charge controllers, and system communication components, as well as circuit breakers, batteries, accessories, and assembled systems. Contact Information Telephone: (Main) (Technical Support) (Fax) Mailing Address: OutBack Power Technologies Sales & Marketing th Street N.E nd Street NE Arlington, WA USA Arlington, WA USA Web Site: Disclaimer Support@outbackpower.com UNLESS SPECIFICALLY AGREED TO IN WRITING, OUTBACK POWER TECHNOLOGIES: (a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION. (b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER S RISK. Warranty Summary OutBack Power Technologies warrants that the products it manufactures will be free from defects in materials and workmanship for a period of five (5) years subject to the conditions set forth in the warranty detail, found in the product manual. OutBack Power Technologies cannot be responsible for system failure, damages, or injury resulting from improper installation of their products. Notice of Copyright MATE Series Overview January 202 by OutBack Power Technologies. All Rights Reserved. Trademarks OutBack Power is a registered trademark of OutBack Power Technologies. Date and Revision January 202, Revision A Part Number Rev A

14 30099

Descripción General del MATE y MATE2. Sistema de Visualización y Control

Descripción General del MATE y MATE2 Sistema de Visualización y Control Contenido Conceptos Básicos..... 1 Mapa de menús - Configuración Básica.... 2 Configuración Avanzado...... 3 Arranque Automático