Product Classification. General Specifications. Construction Materials. Dimensions. Environmental Specifications. General Specifications

Transcription

1 Product Classification Portfolio FD S HELIAX FiberFeed Pendant, 2.0, 3 x 12: Six 6 AWG conductors, 24 single mode fibers. Top breakout: 6 HQLC connector outputs. Bottom breakout: blunt cut conductors, DLC connectors, 250 ft CommScope Brand FiberFeed HELIAX Product Series Product Type FD2 Hybrid cable assembly Regional Availability Asia Australia/New Zealand EMEA Latin America North America Ordering Note CommScope non-standard product Construction Materials Fiber Type G.657.A2 Total Fibers, quantity 24 Jacket Color Black Dimensions Cord Length m ft Cable Weight kg/km lb/kft Diameter Over Jacket mm 1.20 in Environmental Specifications Operating Temperature -40 C to +75 C (-40 F to +167 F) Conductors, quantity 6 Construction Type Direct breakout trunk Center Conductor Gauge 6 AWG Interface Body Style, connector A Straight Interface Body Style, connector B Straight Interface Feature, connector A Outdoor Interface Feature, connector B Standard Interface, connector A HQLC Interface, connector B DLC Minimum Bend Radius, conductor mm 12.0 in Minimum Bend Radius, furcation 30.0 mm 1.2 in Optical Performance Assembly Insertion Loss, typical 0.75 db Assembly Insertion Loss, typical note Insertion loss is measured at 1310 and 1550 nm page 1 of 5

2 FD S Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system * Footnotes Assembly Insertion Loss, typical note Insertion loss is measured at a room temp of +20 C (+68 F) page 2 of 5

3 HELIAX FiberFeed Hybrid Cable, UL Type TC-OF-ER Product Classification Portfolio CommScope Brand FiberFeed HELIAX Product Type Hybrid cable Regional Availability Asia Australia/New Zealand EMEA Latin America North America Standards And Qualifications Cable Qualification Standards ANSI/ICEA S ANSI/ICEA S Telcordia GR- 20 Telcordia GR-409 UL 1277 Representative Image Conductor Gauge 6 AWG Conductors, quantity 6 Construction Type Shielded Alarm Wire Gauge 18 AWG Alarm Wire, quantity 2 Application Remote radio head Brand HELIAX FiberFeed Cable Type Wireless feeder Inner Shield (Tape) Material Corrugated aluminum Outer Shield (Tape) Material PVC Ripcord Material Para-aramid synthetic fiber Strength Member Glass reinforced plastic rod Water Blocking Method Water blocking tape(s) Water blocking threads Construction Materials page 3 of 5

4 Total Fiber Count 24 Fiber Type G.657.A2/B2 Fiber Type Solution G.657.A2/B2 Fiber Type, quantity 24 Fibers per Subunit, quantity 12 Jacket Color Black Electrical Specifications dc Resistance Note Maximum value based on a standard condition of 20 C (68 F) dc Resistance, maximum ohms/kft ohms/km Dimensions Buffer Tube/Subunit Diameter 6.00 mm 0.24 in Cable Weight kg/km lb/kft Diameter Over Jacket mm 1.20 in Subunit, quantity 2 Physical Specifications Minimum Bend Radius, multiple bends, loaded mm 24.0 in Minimum Bend Radius, multiple bends, unloaded mm 12.0 in Minimum Bend Radius, single bend, unloaded mm 8.4 in Tensile Load, long term, maximum 1068 N 240 lbf Tensile Load, short term, maximum 3559 N 800 lbf Environmental Specifications Environmental Space Installation Temperature Operating Temperature Storage Temperature Wireless installation -30 C to +70 C (-22 F to +158 F) -40 C to +80 C (-40 F to +176 F) -40 C to +80 C (-40 F to +176 F) Mechanical Test Specifications Compression 44 N/mm 250 lb/in Compression Test Method FOTP-41 Flex Test Method FOTP-104 Impact 5.88 N-m 4.34 ft lb Impact Test Method FOTP-25 Twist 10 cycles Twist Test Method FOTP-85 Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system page 4 of 5

5 Included Products CS-8G-MP (Product Component not orderable) Enhanced Low Macrobending, Zero Water Peak, Dispersion-Unshifted Singlemode Fiber (ITU-T G.657.A2, B2) * Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable page 5 of 5