What s New in Data Acquisition
|
|
|
- Ariel Wheeler
- 6 years ago
- Views:
Transcription
1
2 What s New in Data Acquisition NEW!
3 New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software
4 New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software
5 USB Demo Benefits of USB Simple, clean physical connection to computer Single thin cable Bus-powered devices Easily embeddable Easy to connect Computer independent Plug & Play setup/configuration Portable
6 NI USB DAQ Products High-Performance USB DAQ NEW! DAQ for Sensors and High Voltages Low-Cost USB DAQ 30 New USB Products!
7 New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software
8 M Series Demo
9 Multifunction Data Acquisition NEW! Next Generation MIO (M Series) High-channel count MIO (80 AI) MIO designed for OEM/Integrators MIO for PCI Express Simultaneous MIO (S Series) 3 MS/s, 14-bit, 8 analog input 3 MS/s, 14-bit, 4 analog input 500 ks/s, 16-bit, 8 analog input 500 ks/s, 16-bit, 4 analog input NI NI , PCIe-6251 M NI Series 6225 (37-pin) NI 6132, NI 6123, PCIe-6259 NI 6122
10 Dedicated Bandwidth for Each MIO Device
11 New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software
12 Typical MIO DAQ versus Intelligent DAQ I/O Control Analog I/O Digital I/O Onboard Counters Fixed ASIC for timing and triggering Multiplexed, shared sample clock Up to 48 static DIO lines Two general purpose counters Open FPGA for timing and triggering Simultaneous, independent functionality 96 or 160 hardware timed Custom counters on any digital line
13 Intelligent DAQ Devices NEW! 10 Intelligent DAQ R Series boards 1 million and 3 million gate FPGAs PCI and PXI Low-cost options
14 Intelligent DAQ Family User-Defined Onboard Processing Hardware-Timed Decision Making Flexible Timing and Triggering Simultaneous or Multi-Rate Sampling Custom Counter Implementation Onboard Digital Filtering High-Speed Control PID Loop Rates >100 khz
15 Intelligent DAQ Demo
16
17 Digital Pulse Generator
18 Event Counter
19 Analog Waveform Generator
20 Triggered Simultaneous Analog Input
21
22 New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software
23 NI Data Acquisition Software NEW! Increasing Functionality Measurement Hardware DDK NI-DAQmx Base NI-DAQmx Increasing Development Effort
24 NI-DAQmx Driver Software NEW! Support for more than 200 devices NI-DAQmx simulated devices Improved streaming to disk Virtual channel calibration Free datalogging software DAQ Assistant improvements Programmatically save tasks DAQ for OPC Etc.
25 Simulated Devices Demo
26 NI Data Acquisition Software Increasing Functionality NEW! Measurement Hardware DDK NI-DAQmx Base NI-DAQmx Increasing Development Effort
27 NI Data Acquisition Software NEW! Increasing Functionality Measurement Hardware DDK NI-DAQmx Base NI-DAQmx Increasing Development Effort
28 Products with OEMs in Mind NEW! Low-cost Digital I/O High-performance USB (37-pin) low-cost plug in MIO SCA1 (37-pin) M Series multifunction Custom driver development Measurement USB-6501 USB-6016 NI (37-pin) OEM Hardware Version DDK
29 Slide 28 SCA1 Need to add in image for the 6010 S. Craig Anderson, 9/18/2005
30 Wireless DAQ Trends
31 What You Can Do Today Distributed wireless system Add an inexpensive, off-the-shelf router to Ethernet-based system g as little as $30 each Other proprietary protocols (for longer distances) available
32 What You Can Do Today Handheld wireless DAQ system Utilize wireless protocols built into PDAs Bluetooth IrDA
33 Wireless DAQ Develop a Wireless Measurement System Application Note WiFi? Bluetooth? Etc. Wireless DAQ Survey Survey link is in the application note Enter a drawing for a free USB-6008
34 Questions?
35 Visit the Consultation Zone Discuss products and configure your application Get estimated costs or a quote to take with you Request a FREE consultation an NI engineer visits your office to: Discuss your application and specialized topics Demonstrate customized applications, examples, and products Schedule an on-site seminar at your location
Advanced NI-DAQmx Programming Techniques with LabVIEW
Advanced NI-DAQmx Programming Techniques with LabVIEW Agenda Understanding Your Hardware Data Acquisition Systems Data Acquisition Device Subsystems Advanced Programming with NI-DAQmx Understanding Your
High-Speed M Series Multifunction DAQ 16-Bit, up to 1.25 MS/s, up to 80 Analog Inputs
High-Speed M Series Multifunction DAQ 16-Bit, up to 1.25 MS/s, up to 80 Inputs NI M Series High-Speed NI recommends high-accuracy M Series for 5X more measurement sensitivity and lowpass filtering 16,
NI-DAQmx Basic Course NITS John Shannon
NI-DAQmx Basic Course NITS 2005 John Shannon Agenda Intro to DAQMX Difference between traditional / DaqMX MAX and DAQ Assistance Analog Input / Output Property Nodes Buffered / Continuous Acquisition Analog
New Technologies in Data Acquisition
New Technologies in Data Acquisition Agenda Introduction to PC Based Data Acquisition New Technologies in Data Acquisition 1. New Bus Technologies 2. Signal Conditioning, Timing and Synchronization Introduction
High-Speed M Series Multifunction DAQ 16-Bit, up to 1.25 MS/s, up to 80 Analog Inputs
High-Speed M Series Multifunction DAQ 16-Bit, up to 1.25 MS/s, up to 80 Inputs NI M Series High-Speed NI recommends high-accuracy M Series for 5X more measurement sensitivity or industrial M Series for
E Series Multifunction I/O 1.25 MS/s, 12-Bit, 16 or 64 Analog Inputs
E Series Multifunction I/O 1.25 MS/s, 12-Bit, 16 or 64 Inputs Families (E-1) Families (E-1) Family (MIO-16E-1) PCI-MIO-16E-1 PXI- AT-MIO-16E-1 Family (MIO-64E-1) PCI- PXI- VXI-MIO-64E-1 Input 16 single-ended,
NI Technical Symposium ni.com
NI Technical Symposium 2016 1 New Hardware Technologies for DAQ Applications Nicholas Haripersad Field Sales Engineer Session Objectives Introduce the three major NI DAQ platforms Present future trends
Agenda. Programming FPGAs Why Are They Useful? NI FPGA Hardware Common Applications for FPGAs How to Learn More
Agenda Programming FPGAs Why Are They Useful? NI FPGA Hardware Common Applications for FPGAs How to Learn More FPGA Technology Programmable Interconnects Logic Blocks I/O Blocks FPGA Logic Implementation
The data acquisition components, and their relationship to each other, are shown below.
Data acquisition system Part (1) Digital inputs output and counter You can think of a data acquisition system as a collection of software and hardware that connects you to the physical world. A typical
LabVIEW Core 1. What You Need To Get Started. File Locations. The course installer places the course files in the following location: ni.
LabVIEW Core 1 What You Need To Get Started LabVIEW Core 1 Course Manual (online) LabVIEW Core 1 Exercise Manual (online) LabVIEW Core 1 Course CD (preloaded on S Share) Multifunction DAQ device File Locations
Analog Input Sample Rate
ECONseries Low Cost USB Data Acquisition Modules Overview The ECONseries is a flexible yet economical series of multifunction DAQ modules. You chse the number of analog I/O and digital I/O channels, the
High-Accuracy M Series Multifunction DAQ 18-Bit, up to 625 ks/s, up to 32 Analog Inputs
High-Accuracy M Series Multifunction DAQ 18-Bit, up to 625 ks/s, up to 32 Analog Inputs NI M Series High-Accuracy 16 or 32 analog inputs at 18 bits, 625 ks/s (500 ks/s scanning) Up to 4 analog outputs
ECONseries Low Cost USB DAQ
ECONseries Low Cost USB Data Acquisition Modules ECONseries Low Cost USB DAQ The ECONseries is a flexible yet economical series of multifunction data acquisition modules. You choose the number of analog
ni.com/training Quizzes LabVIEW Core 1 ni.com/training Courses Skills learned: LabVIEW environment Certifications Skills tested: LabVIEW environment
LabVIEW Core 1 What You Need To Get Started LabVIEW Core 1 Course Manual LabVIEW Core 1 Exercise Manual LabVIEW Core 1 Course CD Multifunction DAQ device GPIB interface DAQ Signal Accessory, wires, and
Developing Measurement and Control Applications with the LabVIEW FPGA Pioneer System
Developing Measurement and Control Applications with the LabVIEW FPGA Pioneer System Introduction National Instruments is now offering the LabVIEW FPGA Pioneer System to provide early access to the new
DT3016. High-Speed, Multifunction PCI Data Acquisition Board. Overview. Key Features. Supported Operating Systems
DT3016 High-Speed, Multifunction PCI Data Acquisition Board Overview The DT3016 provides a full range of PCI compatible, plug-in data acquisition boards for high-speed, high accuracy, and high channelcount
How to Choose the Right Bus for Your Measurement System
1 How to Choose the Right Bus for Your Measurement System Overview When you have hundreds of different data acquisition (DAQ) devices to choose from on a wide variety of buses, it can be difficult to select
ECONseries Low Cost USB DAQ
ECONseries Low Cost USB Data Acquisition Modules ECONseries Low Cost USB DAQ The ECONseries is a flexible yet economical series of multifunction data acquisition modules. You choose the number of analog
High-Speed Voltage Output up to 1 MS/s/Channel, up to 16-Bit, up to 32 Channels
NI 673x, NI 671x, NI 672x Low-cost arbitrary waveform generation High channel density Integrated multidevice synchronization bus Easy real-time control with LabVIEW Real-Time Digital triggering and external
Features. RoHS COMPLIANT 2002/95/EC
PCIE-1730 32-ch TTL and 32-ch Isolated Digital I/O PCI Express Card 32-ch isolated DI/O (16-ch digital input, 16-ch digital output) 32-ch TTL DI/O (16-ch digital input,16-ch digital output) High output
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Additional products and features
SECTION 7.3: adding national instruments hardware Step: 1 In order to record data from a National Instruments device, you must fi rst install NI-DAQmx software from the National Instruments website. http://ftp.ni.com/support/softlib/multifunc-
LabWindows /CVI Using the Latest ANSI C Tools for High-Performance Automated Test
LabWindows /CVI Using the Latest ANSI C Tools for High-Performance Automated Test Agenda Introduction to LabWindows/CVI and modular instruments Developing modular instrument applications Hybrid systems
Portable E Series Multifunction DAQ 12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs
Portable E Series Multifunction DAQ 12 or 16-Bit, up to 1.25 MS/s, 16 Analog Inputs E Series Portable 16 analog inputs at up to 1.25 MS/s, 12 or 16-bit resolution Up to 2 analog outputs at up to 1 MS/s,
Features Summary. Input Ranges
DT9844 32-Channel Analog Input USB DAQ Module Overview The DT9844 is a high-accuracy (20-bit resolution), high- speed (1 MS/s sample rate) USB data acquisition module offering unparalleled performance.
High-Speed Voltage Output up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels
High-Speed Voltage Output up to 1 MS/s/Channel, up to 16 Bits, up to 32 Channels NI 673x, NI 671x, NI 672x Low-cost arbitrary waveform generation High-channel density Integrated multidevice synchronization
PC-based data acquisition I
FYS3240 PC-based instrumentation and microcontrollers PC-based data acquisition I Spring 2016 Lecture #8 Bekkeng, 20.01.2016 General-purpose computer With a Personal Computer (PC) we mean a general-purpose
DAQ SYSTEM FOR GYROLASER
Bachir Bouhadef 1 Analog input channels : Icw, Iccw and Sagnac @ 5 khz. Control parameters ( >10 ) @ 1 Hz. Sagnac Icw Iccw 2 NI PXI-8106 RT : 2.16 GHz Intel Core 2 Duo T7400 With LabVIEW Real-Time 3 What
DT Channel Analog Input USB DAQ Module. Key Features:
DT9844 32-Channel Analog Input USB DAQ Module Ultra High-Accuracy: 20-bits, 0.01% Very High-Speed: 1 MHz sampling Low Noise, Low Crosstalk: -80dB @ 1kHz, 500kHz settling ±500V Tri-sectional Isolation:
VIBBOX. 32, 48, or 64-Channel Sound & Vibration Solution Expansion to 256 Channels. Key Feature of Each VIBbox: Table 1. Key Features of VIBbox Models
VIBBOX 32, 48, or 64-Channel Sound & Vibration Solution Expansion to 256 Channels VIBbox is a high-accuracy, high channel count, dynamic signal analyzer system for sound and vibration applications. Each
A variety of ECONseries modules provide economical yet flexible solutions. Waveform Generation
ECONseries BUS: USB Type: Economy, Mini-Instruments ECONseries Economy USB Mini-Instruments Flexible Yet Economical A variety of low-cost ECONseries modules are available to provide flexible yet economical
Embedded Controller combines Machine Control and Data Acquisition using EPICS and MDSplus P. Milne
Embedded Controller combines Machine Control and Data Acquisition using EPICS and MDSplus P. Milne Solutions Ltd, James Watt Building, SETP, G75 0QD East Kilbride, United Kingdom Applications such as pulse
PXI Tsunami in Semiconductor ATE Michael Dewey Geotest Marvin Test Systems Silicon Valley Test Conference
PXI Tsunami in Semiconductor ATE Michael Dewey Geotest Marvin Test Systems miked@geotestinc.com Silicon Valley Test Conference 2012 1 Agenda Geotest background Semiconductor market and trends PXI for semiconductor
Measurement Studio Using.NET in Your Test and Measurement Applications
Measurement Studio Using.NET in Your Test and Measurement Applications Agenda Introduction to Microsoft Visual Studio.NET Acquire Analyze Present Resources What are Customers Saying About Measurement Studio?
A variety of ECONseries modules provide economical yet flexible solutions
Economy USB Mini-Instruments Flexible Yet Economical A variety of low-cost modules are available to provide flexible yet economical solutions. Choose the number of analog I/O and digital I/O channels,
BE/EE189 Design and Construction of Biodevices Lecture 5. BE/EE189 Design and Construction of Biodevices - Caltech
BE/EE189 Design and Construction of Biodevices Lecture 5 LabVIEW Programming Data acquisition DAQ system Signals and signal conditioning Nyquist frequency NI ELVIS II NI-DAQmx and DAQ assistant LabVIEW
Data Acquisition Fundamentals
-1001 MAINFRAME Application Note 007 Introduction Data Acquisition Fundamentals Today, most scientists and engineers use personal computers (PCs) with PCI, PXI/CompactPCI, PCMCIA, USB, IEEE 1394, ISA,
Low-Cost E Series Multifunction DAQ. 12 or 16-Bit, 200 ks/s, 16 Analog Inputs
Low-Cost E Series Multifunction DAQ 12 or 16-Bit, 200 ks/s, 16 Analog Inputs Low-Cost E Series Multifunction DAQ E Series Low-Cost 16 analog inputs at up to 200 ks/s, 12 or 16-bit resolution Up to 2 analog
DT7816 Linux Data Acquisition Real-Time High Performance ARM Module for Embedded Applications
DT7816 Linux Data Acquisition Real-Time High Performance ARM Module for Embedded Applications The DT7816 is a high performance, System on Module (SOM) for data acquisition, featuring an embedded Cortex-A8
Low-Cost Multifunction DAQ for USB
NI USB-6008, NI USB-6009 Small and portable 12 or 14-bit input resolution, at up to 48 ks/s Built-in, removable connectors for easier and more cost-effective connectivity 2 true DAC analog outputs for
Automated Test Equipments
Automated Test Equipments Elias Nicolas National Instruments - Arabia Tests and Measurements Interactive Measurements Benchtop Non-programmed Automated Measurements Data Acq, Instr I/O Programmed Automated
±500 V Isolation Protects Your Data. Sample Rate. 16 bits ±1.25 V, ±2.5 V, ±5 V, ±10 V 100 ks/s 16 2
DT9800 Series Isolated, Multifunction USB Data Acquisition Modules Overview The DT9800 Series is a family of low-cost, isolated, multifunction USB data acquisition modules. All DT9800 Series modules feature
DT9828. USB Powered Thermocouple Measurement Module. Key Features: Analog Input Channels
DT9828 USB Powered Thermocouple Measurement Module Key Features: 8 differential analog inputs for thermocouple or voltage measurements Support for B, E, J, K, N, R, S, and T thermocouple types One cold
Data Acquisition in LabVIEW
University College of Southeast Norway Data Acquisition in LabVIEW Hans-Petter Halvorsen, 2016.10.28 http://home.hit.no/~hansha Preface This tutorial explains the basic concepts of a Data Acquisition in
LabVIEW Graphical Development Hands-On Seminar
LabVIEW Graphical Development Hands-On Seminar Agenda Introduction to National Instruments and LabVIEW Graphical Development Acquire with LabVIEW Data Acquisition Instrument Control Modular Instrumentation
ni.com High-Speed Digital I/O
High-Speed Digital I/O Interfacing with Digital I/O Design Verification & Validation Production Characterization Protocol communication Parametric testing DUT control Limit testing Stress testing BERT
Acquiring Data from Sensors and Instruments Using MATLAB
Acquiring Data from Sensors and Instruments Using MATLAB Chirag Patel Application Engineer Control Systems MathWorks 2011 The MathWorks, Inc. 1 Agenda Why acquire data with MATLAB? Overview of data access
ECU Measurement and Calibration in a Real-Time Test Environment. Roland Magolei National Instruments Engineering GmbH Embedded Networks
ECU Measurement and Calibration in a Real-Time Test Environment Roland Magolei National Instruments Engineering GmbH Embedded Networks Term Definitions What is ECU Calibration? Software Optimization of
LabVIEW Basics I: Introduction Course
www.ni.com/training LabVIEW Basics I Page 1 of 4 LabVIEW Basics I: Introduction Course Overview The LabVIEW Basics I course prepares you to develop test and measurement, data acquisition, instrument control,
Building a Next Generation Data Logging System
1 Building a Next Generation Data Logging System Fanie Coetzer, Field Sales Engineer Northern South Africa Outline Introduction to the Next Generation of Data Logging Signals and Signal Conditioning Data
ESERIES CALIBRATION FIXTURE INSTALLATION GUIDE
ESERIES CALIBRATION FIXTURE INSTALLATION GUIDE E Series Calibration Fixture for E and S Series Devices The E Series calibration fixture connects the calibration equipment to the E or S Series device you
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
BTH-1208LS Wireless Multifunction DAQ Device
Wireless Multifunction DAQ Device Features Eight 11-bit single-ended (SE) or four 12-bit differential (DIFF) analog input channels Acquires data over Bluetooth or USB connection Maximum sampling rate of
AIO AH-PCI. Features. Packing List. 12-bits Analog I/O Board (High Gain) for PCI AIO AH-PCI 1. Ver.1.04
12-bits alog I/O Board (High Gain) for PCI AIO-121602AH-PCI This product is a PCI-bus compatible multifunction board equipped with analog input x 16ch, analog output x 2ch, digital input/output (unisolated
CompactDAQ Chassis PRODUCT FLYER CONTENTS. Цены и срок поставки уточняйте на сайте по телефону: или
PRODUCT FLYER CompactDAQ Chassis CONTENTS CompactDAQ Chassis Detailed View of cdaq-9189 Key Features NI-DAQmx Application Programming Interface (API) Platform-Based Approach to Conditioned Measurements
LabVIEW Tutorials. T.1 Temperature Measurement and Cold Junction Compensation (CJC) LUMS School of Science and Engineering
LabVIEW Tutorials T.1 Temperature Measurement and Cold Junction Compensation (CJC) LUMS School of Science and Engineering Umer Hassan & Muhammad Sabieh Anwar Introduction: In this tutorial we shall learn
Low Cost Multifunction I/O 100 ks/s, 12-Bit, 8 Analog Inputs
00 ks/s, 2-Bit, Analog Inputs 200 Family PCI-200 DAQCard-200 Lab-PC-200 DAQPad-200 200AI Family Lab-PC-200AI Analog Inputs single-ended, 4 differential channels 00 ks/s sampling rate 2-bit resolution Analog
Gas Combustion Testing With LabVIEW
Gas Combustion Testing With LabVIEW Asa Kirby Senior Product Manager Taking Advantage of Trends in Product Test & Validation with LabVIEW Asa Kirby Senior Product Manager Abstract The growing complexity
Answers to Frequently Asked Questions about NI-DAQmx and Traditional NI-DAQ (Legacy)
Answers to Frequently Asked Questions about NI-DAQmx and Traditional NI-DAQ (Legacy) Introduction This document answers the most frequently asked questions about NI-DAQmx and Traditional NI-DAQ (Legacy).
DT MS/s High-Speed, Isolated Simultaneous USB Data Acquisition Module. Overview. Key Features. Bandwidth of the DT9862
DT9862 10 MS/s High-Speed, Isolated Simultaneous USB Data Acquisition Module Overview The DT9862 is a high-speed, high-performance USB data acquisition module that provide throughput rates up to 10 MS/s
VIBbox 64-Channel Sound & Vibration Solution
VIBbox 64-Channel Sound & Vibration Solution VIBbox is a high-accuracy, high channel count, dynamic signal analyzer system for sound and vibration applications. VIBbox packages four DT9857E modules in
Scientific Instrumentation using NI Technology
Scientific Instrumentation using NI Technology Presented by, Raja Pillai Technical Consultant and Field Engineer National Instruments Australia Pty. Ltd. NI s Platform-Based Approach 2 The LabVIEW RIO
16-Bit A/D Converter (ENOB=14.1) 16-bit D/A. 16-bit D/A. Digital I/O (8/8) Counter/Timer (2)
DT9818 Isolated, Embedded USB Data Acquisition Board The DT9818 is perfect for embedding in a custom application where isolation is required. The DT9818 is a highperformance USB data acquisition (DAQ)
Hardware: Acquiring Data and Communicating with Instruments
Hardware: Acquiring Data and Communicating with Instruments 4 Acquiring a Signal This chapter introduces you to the Express VIs you use to acquire data and communicate with instruments on Windows. These
DT9800 Series. USB Function Module for Data Acquisition
DT9800 Series USB Function Module for Data Acquisition True plug-and-play: Key Features One cable supplies both power and all connections to the USB module. All connections are external so you do not need
FlexRIO. FPGAs Bringing Custom Functionality to Instruments. Ravichandran Raghavan Technical Marketing Engineer. ni.com
FlexRIO FPGAs Bringing Custom Functionality to Instruments Ravichandran Raghavan Technical Marketing Engineer Electrical Test Today Acquire, Transfer, Post-Process Paradigm Fixed- Functionality Triggers
PCI-express data acquisition card DAQ0504M User Guide
PCI-express data acquisition card DAQ0504M User Guide Contents Safety information... 3 About this guide... 4 DAQ0504M specifications... 5 Chapter 1. Product introduction 1-1. Package contents...... 6.
Ethernet Data Acquisition System
Ethernet Data Acquisition System NI CompactDAQ Measure up to 256 channels of sensor, analog I/O, and digital I/O signals Choose from more than 50 hotswappable I/O modules with integrated signal conditioning
With respect to the National Instruments software product(s) being used, the following patents may apply:
PATENT NOTICE National Instruments Software Related Patents With respect to the National Instruments software product(s) being used, the following patents may apply: LabVIEW The LabVIEW software is covered
The Benefits of FPGA-Enabled Instruments in RF and Communications Test. Johan Olsson National Instruments Sweden AB
The Benefits of FPGA-Enabled Instruments in RF and Communications Test Johan Olsson National Instruments Sweden AB 1 Agenda Introduction to FPGAs in test New FPGA-enabled test applications FPGA for test
AD16-16(PCI)EV. Features. High-Resolution Analog Input Board for PCI AD16-16(PCI)EV 1. Ver.1.02
High-Resolution Analog Input Board for PCI AD6-6(PCI)EV * s, color and design of the products are subject to change without notice. Features Resolution : 6-bit, combination speed : 0 sec/ch This product
C Series Analog Output Modules
C Series Analog Output Modules NI 9263, NI 9265 NEW! ±10 V and 0 to 20 ma analog output ranges, 16-bit resolution, 100 ks/s simultaneous update rate 4 channels per module Isolation up to 2,300 V rms (withstand),
DaqBoard/1000. Series 16-Bit, 200-kHz PCI Data Acquisition Boards
16-Bit, 200-kHz PCI Data Acquisition Boards Features 16-bit, 200-kHz A/D converter 8 differential or 16 single-ended analog inputs (software selectable per channel) Up to four boards can be installed into
AD12-16(PCI)EV. Features. Analog Input Board for PCI AD12-16(PCI)EV 1. Ver.1.02
Analog Input Board for PCI AD2-6(PCI)EV * s, color and design of the products are subject to change without notice. This product is PCI-compliant interface boards that convert analog input signals to digital
A 40-pin connector provides access to 24 DIO connections.
PCI Express Analog and Digital I/O Board Features 16-bit resolution 16 single-ended or 8 differential analog input channels (switchselectable) Up to 100 ks/s overall throughput (100 ks/s max for any channel)
How to validate your FPGA design using realworld
How to validate your FPGA design using realworld stimuli Daniel Clapham National Instruments ni.com Agenda Typical FPGA Design NIs approach to FPGA Brief intro into platform based approach RIO architecture
Create Without Limits: Add the Power of User-Programmable FPGAs to Your Test Applications
1 Create Without Limits: Add the Power of User-Programmable FPGAs to Your Test Applications Farris Alhorr Business Development Manager RF & Wireless Comm farris.alhorr@ The Parameters of Instrumentation
FYS Data acquisition & control. Introduction. Spring 2018 Lecture #1. Reading: RWI (Real World Instrumentation) Chapter 1.
FYS3240-4240 Data acquisition & control Introduction Spring 2018 Lecture #1 Reading: RWI (Real World Instrumentation) Chapter 1. Bekkeng 14.01.2018 Topics Instrumentation: Data acquisition and control
ITI User Guide. ISOBUS Test Interface
ITI User Guide ISOBUS Test Interface Table of Contents Introduction... 3 References... 3 Terms and Definitions... 3 Package Contents... 3 General Description... 4 Internal Chassis Layout... 5 Connectors
DAQ in MATLAB HANS-PETTER HALVORSEN,
Telemark University College Department of Electrical Engineering, Information Technology and Cybernetics DAQ in MATLAB HANS-PETTER HALVORSEN, 2011.06.07 Faculty of Technology, Postboks 203, Kjølnes ring
A Step Into the Future of Data Measurement. Focus on Tests and Measurements. Let idaq Do the Rest.
W H I T E P A P E R A Step Into the Future of Data Measurement Focus on Tests and Measurements. Let idaq Do the Rest. idaq Whitepaper OVERVIEW IDAQ, THE INTUITIVE, COMPLETE AND RELIABLE SOFTWARE FOR YOUR
DAQ & Control with PXI. Murali Ravindran Senior Product Manager
DAQ & Control with PXI Murali Ravindran Senior Product Manager Agenda What is PXI? Trigger with PXI Multicore Programming DAQ & Control with FPGA Instrumentation Timeline 1965 1987 1995 1997 Photo Courtesy
DT7837. ARM Module for Embedded Applications. Overview. Key Features. Supported Operating Systems
DT7837 ARM Module for Embedded Applications Overview The DT7837 is a high accuracy dynamic signal acquisition module for noise, vibration, and acoustic measurements with an embedded Cortex-A8 600 MHz ARM
AIO LN-USB. Features. N Series for USB Multifunction DAQ Unit (8ch AI, 2ch AO, 16ch DIO) AIO LN-USB 1. Ver.1.01
N Series for USB Multifunction DAQ Unit (8ch AI, 2ch AO, 16ch DIO) AIO-120802LN-USB This product is a USB2.0-compliant analog I/O unit that extends the analog I/O function of USB port of PCs. Compact design
Increase Your Test Capabilities with Reconfigurable FPGA Technology
Increase Your Test Capabilities with Reconfigurable FPGA Technology CTEA Electronics Symposium Ryan Verret Senior Product Manager FPGA Technology for Test National Instruments Graphical System Design A
Ettus Research Update
Ettus Research Update Matt Ettus Ettus Research GRCon13 Outline 1 Introduction 2 Recent New Products 3 Third Generation Introduction Who am I? Core GNU Radio contributor since 2001 Designed
Data Acquisition Laboratory
Session 2559 Data Acquisition Laboratory Asad Yousuf Savannah State University Abstract The essential element to automate your system for data collection and analysis is termed as the data acquisition.
Readout Systems. Liquid Argon TPC Analog multiplexed ASICs SiPM arrays. CAEN 2016 / 2017 Product Catalog
Readout Systems Liquid Argon TPC Analog multiplexed ASICs SiPM arrays CAEN 2016 / 2017 Product Catalog 192 Readout Systems SY2791 Liquid Argon TPC Readout System The SY2791 is a complete detector readout
PCIe-862x Series Board User Manual
PCIe-862x Series Board User Manual High-speed Multifunction Boards Version 1.0, May 2015 SUPPORT This manual relates to the following boards: PCIe-8620 and PCIe-8622. WARRANTY All products manufactured
Introduction to LabVIEW and NI Hardware Platform
Introduction to LabVIEW and NI Hardware Platform Corrie Botha Platform-Based Approach 2 With LabVIEW, You Can Program the Way You Think 3 With LabVIEW, You Can Program the Way You Think The graphical,
Features. High-precision Analog input board (Low Profile size) for PCI Express AI-1616L-LPE AI-1616L-LPE 1. Ver.1.01
High-precision Analog input board (Low Profile size) for PCI Express AI-1616L-LPE *Specifications, colors and design of the products are subject to change without notice. This product is a multi-function,
High-Speed M Series Multifunction Data Acquisition - 16-Bit, up to 1.25 MS/s, up to 80 Analog Inputs
Technical Sales (866) 531-6285 orders@ni.com Requirements and Compatibility Ordering Information Detailed Specifications Pinouts/Front Panel Connections For user manuals and dimensional drawings, visit
Measurement & Automation Explorer (MAX) View and control your devices and software
1. Labview basics virtual instruments, data flow, palettes 2. Structures for, while, case,... editing techniques 3. Controls&Indicators arrays, clusters, charts, graphs 4. Additional lecture State machines,
Multifunction DAQ Accessory and Cable Selection Guides
Multifunction DAQ Accessory and Cable Selection Guides NI Cable Design Advantages The cables designated EP are the most commonly used data acquisition device cables. Each type of cable is designed to work
PXI Remote Control and System Expansion
Have a question? Contact Us. PRODUCT FLYER PXI Remote Control and System Expansion CONTENTS PXI Remote Control and System Expansion Components of a Remotely Controlled PXI System Choosing a Remote Control
Datalogging in LabVIEW
Telemark University College Department of Electrical Engineering, Information Technology and Cybernetics Datalogging in LabVIEW HANS-PETTER HALVORSEN, 2011.01.04 Faculty of Technology, Postboks 203, Kjølnes
New Software-Designed Instruments
1 New Software-Designed Instruments Nicholas Haripersad Field Applications Engineer National Instruments South Africa Agenda What Is a Software-Designed Instrument? Why Software-Designed Instrumentation?
DAQ Accessories Selection Guide
DAQ Accessories Selection Guide NI Cable Design Advantages National Instruments offers many different high-performance shielded cables that have been specially designed for specific NI multifunction DAQ
LabVIEW FPGA in Hardware-in-the-Loop Simulation Applications
LabVIEW FPGA in Hardware-in-the-Loop Simulation Applications Publish Date: Dec 29, 2008 38 Ratings 4.16 out of 5 Overview Hardware-in-the-loop (HIL) simulation is achieving a highly realistic simulation
Dept. of Electrical, Computer and Biomedical Engineering. Instrumentation for the data acquisition laboratory
Dept. of Electrical, Computer and Biomedical Engineering Instrumentation for the data acquisition laboratory Purpose of the lab activity Design and make simple systems for data acquisition from detectors,