ICP DAS. ICP DAS 2013 M2M Solutions

Transcription

1 2013 M2M Solutions Industrial Computer Industrial Product Data Computer Acquisition Product System Data Acquisition System PAC

2 Content M2M Introduction 2G/3G Wireless Solutions Remote Maintenance Solutions ZigBee Wireless Solutions WLAN Wireless Solutions IR Wireless Solutions

3 M2M Introduction

4 M2M Introduction M2M- Machine to Machine, Mobile, Man communication M2M- Integration of various communication technologies M2M- A generic of technology improving communication & networking among machines M2M- Share information among machines/devices, backend info systems and users M2M- Realize the interconnection between devices and supervisory in separate areas Man Machine M2M Mobile Man Machine 4

5 M2M requirements Vehicle management Dispatch, position return Security Home security, Bank security Manless room security Traffic application Vehicle flow monitoring, traffic light control Measurement system Data acquisition, telemedicine.. Industry Automation Remote maintenance, manless device monitor, Display system 5

6 Comm. speed (bps) Distance (meter) Frequency (MHz) Wireless Tech. Comparison Table 2G/3G Zigbee Wireless Lan 2G : 14.4K/171K 3G : 5.8M/7.2M 10K~250K 54M 35K (at 900MHz) 10 ~ (ZT-2000) 0~100 2G : 850/900/1800/1900 3G : 2100/1900/900/ G 2.4G Charge By ISP Free Free Network WAN Personal wireless LAN Wireless LAN 2G : GSM/GPRS 3G : IEEE Standard WCDMA/CDMA2000/ IEEE TD-CDMA b/g Application Remote real time monitoring Vehicle Application (Wide range) Building automation Portable application Telemedicine (Limit space) Factory automation Data acquisition (Limit space) 6

7 Advantages of Wireless Low system setup cost, Machine no wiring, easy-installation Easy to extend system Low cost to maintain High security Machine Portable system application System Integration with mobile 7

8 M2M solutions of 2G/3G/ZigBee/Wifi wireless and Remote maintenance solutions No need expensive fixed line network Save cost substantially on 2G/3G/ZigBee/Wifi network Communicate reliably with any remote equipment in real time Remote maintenance, Remote diagnostic, and Remote monitoring solutions Integrated with InduSoft, EZ data logger and OPC server 8

9 M2M selection guide GSM/GPRS Remote Maintenance ZigBee Wi-Fi Field Wide LAN Wide/Local Local Local Network Wireless Wire/Wireless Wireless Wireless Application SMS/GPRS application Voice alarm Remote data transmission Remote I/O control system Remote maintenance system Audio/video communication Remote diagnosis Remote software update Local wireless application Wire transfer to wireless Wireless I/O application Local wireless application Wire transfer to wireless Wireless I/O application 9

10 2G/3G Wireless Solutions

11 2G/2.5G/3G Comparison Table 2G 2.5G 3G Technology GSM- CSD GSM-GPRS WCDMA CDMA2000 TD-SCDMA Frequency 850/900/1800/1900 MHz 850/900/1800/1900 MHz 850/900/1900/2100 MHz Bandwidth 9.6 K ~ 14.4K bps 56 K ~ 114 Kbps 384K~ 7.2 Mbps Application Voice Call SMS WAP Service Voice Call SMS WAP Service MMS Bell and Game Download Voice Call SMS WAP Service MMS Video Call Mobile Commerce 11

12 3G Tech. Comparison Table WCDMA CDMA2000x1 TD-SCDMA Transfer Rate (bps) 384K~ 7.2 M 144K 384K HSDPA/HSUPA HSDPA/HSUPA 3.5G Download:14Mbps ---- Download :14Mbps Upload:5.8Mbps Upload : 5.8Mbps U.S.A : U.S.A : China : AT&T Sprint Verizon China Mobile China : China : Area China Unicom Taiwan : China Telecom Taiwan : Chunghwa Telecom Asia Pacific Telecom Taiwan Mobile Russia : Germany : 12

13 2G/3G wireless solutions Item Funciton Applicaiton Products 2G/3G Modem Intelligent 2G/3G Controllers 2G/3G PAC RS232/USB Communication Plug&play Data transmission /voice alarm No programming Built-in alarm trigger SMS/Voice/GPRS Remote data logger GPRS Remote Unit OPC server LCD function (option) GPS function (option) Programmable PC/PAC-based applications Remote data acquirement Machine monitoring Home security Vending machine Alarm trigger Remote data acquirement Hydrology system vehicle monitoring system GTM-201 series GT-500 series G-4500 series 13

14 2G/3G Modem Series GTM-201/I-821xW

15 GTM-201 Series Comparison Table GTM-201- GTM-201- GTM-201P- GTM-201-USB I-8212W I-8213W RS232 3GWA 3GWA GPRS/GSM WCDMA/HSUPA 850/900/1800/ /900/1800/1900 (MHz) (Support 2G and 3G) Reset input Yes No Yes MIC Input Audio Yes No Yes AT command Yes Yes Yes Built-in TCP/IP Yes Yes Yes GPS No No Yes No Yes Baud Rate (bps) Interface Driver Dn. : 85.6 Kbps max. Up. : 14.1 Kbps RS-232 No USB (virtual COM) Win2K, XP WinCE 5.0/6.0 Dn. : 85.6 Kbps Up. : 14.1 Kbps RS-232 No Dn. : 7.2 Mbps Up. : 5.6 Mbps USB / RS232 Win2K, XP Price Low Middle Low Middle High 15

16 2G Modem GTM-201-RS232 / GTM-201-USB GSM/GPRS 850/900/1800/1900 MHz 3-wire/9-wire RS-232, USB interface GPRS, Data, SMS and Voice applications Support AT Commands Provide MIC-In, Speaker-out interface Built-in TCP server, TCP client, UDP client static A Digital Input Channel for Resetting the System Support SMS/Voice ActiveX for XP and CE USB Driver Windows, WinPAC(WinCE5.0), LinPAC(Linux2.6) GTM-201-RS232 GTM-201-USB 16

17 GSM/GPRS 850/900/1800/1900 MHz WCDMA 2100/1900/850 MHz (only for 3G module) GPRS, Data, SMS and Voice applications Support AT Commands Built-in TCP server, TCP client, UDP client static Provide SMS Library(VC++ &.NET) Support 32-channels GPS and NMEA v0183 v3.01(only I-8213W) Support XP-8000, WinPAC-8000, LinPAC-8000, ViewPAC, ipac G/3G Module for PAC I-8212W/I-8213W I-8212W-3GWA / I-8213W-3GWA I-8212W I-8212W-3GWA I-8213W I-8213W-3GWA 17

18 3G Modem GTM-201-3GWA 3G : Tri-band 2100/1900/850 MHz (WCDMA/HSPA) 2G : Quad-band 850 / 900 / 1800 / 1900 MHz Support in 3G and 2G Support TCP Server, TCP Client, UDP Client Connection stack Designed for Data, SMS and Voice Applications Support Standard AT Commands A Digital Input Channel for Resetting the System Provide the MIC Input and Speaker (32 Ω) Output Interface Provide SMS Library for VC++/.NET Support three-wire RS-232 and USB 2.0 (high speed) USB Driver for Windows, XPAC(XP driver) andlinpac(linux2.6) GTM-201-3GWA 18

19 Platform Guide GTM-201-RS232 (no driver) GTM-201-USB (USB driver) GTM-201-3GWA (USB driver) IPC / XPAC (WinXP) LinPAC (Linux) WinPAC ViewPAC (WinCE) upac (MiniOS7) Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes (Only RS232) Yes (Only RS232) Connection method Dial-up Dial-up Dial-up TCP/IP library SMS Application AT Command GSM ActiveX (Indusoft demo) (Library for VC) AT Command (Library for gcc) AT Command GSM ActiveX (Library for evc) AT Command GSM API (Library for C) Voice Appliction GSM ActiveX (Indusoft demo) No No No 19

20 GT-201 Series Application 20

21 Application Streetlamp Monitoring System 21

22 Application Ticket Management System 22

23 SMS/Voice Alarm System IPC+ InduSoft + SMS OCX+ GSM modem SMS Alarm/Voice Call 23

24 A River Weir Voice Broadcast Voice Broadcast warning system GTM-201-RS232 24

25 Electric Vehicle Charging Station Ethernet M2M-711D Ethernet / Wi-Fi Converter Wi-Fi GTM-201 I-7540D-WF CAN / Wi-Fi Converter Charge Pump finished charging notify master by SMS 25

26 Intelligent SMS/VOICE Alarm Module GT-530 / SMS-500 Series 26

27 GT-500 Series GT-530 / SMS-530 Intelligent SMS Alarm Controller DI x10(6 Counters), DO x2, 2 RS-232 port Max. 10 Default Phone Numbers Send alarm SMS by DI trigger or exceed Counter preset limits Built-in ASCII Commands and SMS tunnel Communication Modes Supports 3.7 V Li-ion Battery Backup GT-531 / SMS-531 Intelligent Modbus SMS/Voice Alarm Controller RS232 x 2, RS485 x 1 max. 256 short messages and voice alarms Up to 256 mobile phones Send SMS by Modbus RTU protocol The phone numbers can be divided into groups The content of sending SMS message can be changed by Modbus protocol GT-534 / SMS-534 Intelligent SMS/Voice Alarm Controller 6 DIx6, DOx2, AIx1 2 RS232 port Support micro SD card for data log (Max 2G bytes) DO control by dual-tone multifrequency Voice Alarm and SMS triggered by DI trigger or exceed AI/Counter preset limits 27

28 Intelligent SMS Alarm Controller GT-530 / SMS-530 Support GSM 850/900/1800/1900 MHz Support WCDMA 850/900/1900/2100 MHz (SMS-530 only) Identify ASCII or Unicode SMS Automatically Support max. 140 ASCII/70 unicode Characters GUI Configuration Tool Support SMS setting and control Max. 10 Default Phone Numbers Supports 3.7 V Li-ion Battery Backup Send alarm SMS by DI trigger or exceed Counter preset limits Support simple command to send SMS via RS DI(6 counter) / 2DO (4 DI for Battery backup) 28

29 Intelligent SMS/GSM Alarm Controller GT-534 / SMS-534 Support GSM 850/900/1800/1900 MHz Support WCDMA 850/900/1900/2100 MHz (SMS-534 only) Identify ASCII or Unicode SMS Automatically Support max. 140 ASCII Characters Support max. 70 Unicode Characters Built-in ASCII Commands and SMS tunnel Communication Modes Max. 10 Default Phone Numbers DO control by dual-tone multi-frequency Voice Alarm and SMS triggered by DI trigger or exceed AI/Counter preset limits Support simple command to send SMS via RS232 Support micro SD card. (Max 2G bytes) Support data log 6 DI, 2 DO, 1 AI,1 RS232/1 RS485 port 29

30 Intelligent Modbus SMS/Voice Alarm Controller GT-531 / SMS-531 Support GSM 850/900/1800/1900 MHz Support WCDMA 850/900/1900/2100 MHz (SMS-531 only) Support Modbus RTU slave protocol Support max. 256 short messages and voice alarms Support max. 70 Unicode Characters Up to 256 mobile phones can be alerted for each alarm point These phone numbers can be divided into groups Configurable SMS messages The content of sending SMS message can be changed by Modbus protocol Built-in Watch-dog Function 1 RS-485, 2 RS-232 port Support micro SD card. (option, max. 2G bytes) 30

31 GT-530 Series Utility 31

32 Vending/Gaming Machine Monitoring & Reporting System GT-530 SMS Message Control Center GT-534 GSM RS-232 GTM-201-RS-232 GT-530 Voice Alarm Mobile Phone 32

33 Bridge Alarm System DI GND ~~~~~~~ water SMS SMS Bridge Water Level DI Signal GT-530 GT-530 Alarm Light 33

34 Farmland Sprinkler System DO Sprinkler run DI 控制灑水系統 SMS GT-534 DI Sprinkler finished Trouble Alarm Temperature Report DO PLC. 狀態簡訊回報 Control Sprinkler by SMS or push phone bottom HMI 34

35 Modbus to SMS/Voice Alarm System

36 2G/3G RTU System and Application (Remote Terminal Unit) GT-540/G-4500 RTU

37 GPRS RTU Series G-4500-RTU GT-540 GT-540P Built-in I/O 3 DO, 3 DI, 8 AI 6 DI(counter) 2 DO, 1 AI 6 DI(Cunter) 2 DO,1 AI Modbus RTU slave Ethernet Yes No No LCD Yes No No GPS Yes No Yes No Yes Yes Data log Yes Yes Yes Li-ion Battery Backup No Yes Yes 37

38 Intelligent GPRS Remote Terminal Unit GT-540 / GT-540-3GWA Support GSM 850/900/1800/1900 MHz Support WCDMA 850/900/1900/2100 MHz (GT-540-3GWA) Automatic/continuous GPRS Link Management Support Modbus RTU protocol to connect to Max 3 Modbus RTU devices via RS-485 port Support M2M OPC server for SCADA system Easy-to-use API tool for users to develop their applications by various program development tools Be the GPRS I/O devices Support data transferring by Local I/O linkage function to make the simple local control Support 3.7V Li-ion Battery backup Power supply 10 ~ 30 VDC 38

39 GPRS RTU Features Easy to Establish GPRS Network Applications All remote GPRS RTU devices can be managed by single centralized M2M GPRS RTU Center software with a fixed IP address. Active data transmission The remote GPRS RTU product would connect to M2M RTU Center automatically Redundant communication paths in GPRS and Ethernet There are GPRS and Ethernet communication interfaces in G-4500 RTU. That can raise the reliability of communication effectively Modbus RTU device connectivity The RTU module is built-in Modbus RTU protocol. That can make any Modbus RTU device connect to GPRS RTU Device Simple Local I/O link Control The I/O link function help users to do the simple control in local field. Built-in I/O Data Logging GPRS RTU Device provides an external SD interface. These local I/O and Modbus data are recorded in SD memory card for one day in a single 39

40 GPRS RTU Software Item M2M RTU Center M2M RTU Win32 API NAPOPC.M2M DA Server EZ Data Logger InduSoft Description M2M RTU series management software M2M RTU development tool OPC Server for M2M RTU devices The data logger software of SCADA software 40

41 GPRS RTU Series Management Software M2M RTU Center RTU series Management tool Help users to connect to any Modbus slave to GPRS/Ethernet by RTU modules Up to 128 GPRS RTU devices can be managed in one RTU Center software Support NAPOPC.M2M server, EzDatalog and M2M API tool of 41

42 OPC Server for RTU Device NAPOPC M2M DA Server It is an out-of-process OPC Server which provides an Explorer-style user interface Supports searching RTU devices automatically which are connecting to M2M RTU Center using Monitor function can do the real-time monitoring/controlling for RTU modules 42

43 M2M SDK- M2M RTU API Tool Easy to perform M2M RTU devices status monitoring and control Up to 128 or more M2M RTU devices can be managed Help users to connect to any Modbus device to GPRS/Ethernet Easily manage and control distributed remote devices via GPRS/Ethernet Support for M2M RTU products of 43

44 Electric Car Tracing System

45 Hydrological Monitoring System 45

46 Earthquake Alarm System in Dam seismometer 46

47 Solar Inverter Monitoring System

48 Farm Monitoring System 48

49 Classified Papers Transporting System 49

50 2G/3G RMV System and Application (Remote Maintain VxServer) GT-541 / RMV500 Serial

51 RMV Serial GT-541 RMV-531 RMV-511 Built-in I/O No No 6 DI(Counter) 2 DO,1 AI 2G Yes Yes Yes 3G No Yes No Port Number GPS Yes No Yes Li-ion Battery Backup No No Yes 51

52 Intelligent Multiport Serial to GPRS Gateway - GT-541/RMV-531 Support GSM 850/900/1800/1900 MHz Support WCDMA 850/900/1900/2100 MHz (RMV-531 only) Support Virtual COM Function Remote Configuration via Virtual COM 1 x RS-232 port and 1 x RS-485 port for Virtual COM. 1 x Utility port for Configuration Built-in Watch-dog Function Power Reverse Polarity Protection Power supply 10 ~ 30 VDC DIN-Rail mountable 52

53 Intelligent GPRS Remote Terminal Unit - RMV-511 Support GSM 850/900/1800/1900 MHz Support Virtual COM Function Remote Configuration via Virtual COM 1 x RS-485 port for Virtual COM. 6xDI, 2xDO, 1xAI Remote I/O Control via Virtual COM by Modbus RTU Protocol Power Reverse Polarity Protection 53

54 Virtual COM middleware VxServer Virtual Com middleware Up to 128 Virtual Com devices can be managed in VxServer and VxComm driver Easy and quick to build a Virtual Com system Windows-based software 54

55 Solar Ship Remote Monitor 55

56 Refrigerator Truck Remote Monitor 56

57 3G Gateway for Ethernet and Serial Port: GRP-520 Support GSM 850 / 900 / 1800 / 1900 MHz Support WCDMA 850/1900/2100 MHz Remote Configuration via Virtual COM 10/100 Base-TX compatible Ethernet controller 1 x RS-232 port and 1 x RS-485 port for Virtual COM Provide 3G Router function Support port mapping (port forward) function Serial Port to 3G Gateway Support Micro SD card Power Reverse Polarity Protection G-4500PD- Power SIM300 supply 10 ~ 30 VDC DIN-Rail mountable 57

58 IP Camera + VxComm Application G-4500PD- SIM300 58

59 People Counting Application G-4500PD- SIM300 59

60 2G/3G PAC G-4500 Series

61 G G series G G G-4500D-2G G-4500P-2G G-4500PD-2G GD-4500P-2G 2G PAC 2G PAC with LCD Display 2G PAC With GPS 2G PAC with LCD Display and GPS 2G PAC With GPS (Plastic) 61

62 2G PAC G G GSM/GPRS Quad-band 850/ 900/1800/1900 MHz Built-in MiniOS7 OS TCP Server, TCP Client, UDP Client static GPRS lib 10/100 Base Ethernet Built-in Self-Tuner ASIC RS-485 controller Support microsd Storage Card 128 x 64-dots LCD display(option) Built-in RTC, NVRAM, EEPROM 3 DI/ 3 DO/ 8 AI GPS 32-ch (option) G-4500PD-SIM300 62

63 G GWA series G GWA G-4500D-3GWA G-4500P-3GWA G-4500PD-3GWA 3G PAC 3G PAC with LCD Display 3G PAC With GPS 3G PAC with LCD Display and GPS 63

64 3G PAC G GWA 2G : Quad-band 850/ 900/1800/1900 MHz 3G : Tri-band 2100/1900/850 MHz WCDMA supporting WCDMA / HSDPA / HSUPA Embedded MiniOS7 Support TCP Client, UDP Client stack, up to 10 Socket Provide SMS/TCP Library 10/100Base-TX Ethernet Controller Built-in self-tuner ASIC controller on RS-485 port Support SD storage card 128 x 64-dots LCD Display (option) Built-in RTC, NVRAM, EEPROM 3 DI/ 3 DO/ 8 AI GPS 32-ch G-4500PD-SIM300 64

65 Coastal Hydrology Monitoring system 65

66 Earthquake alarm system in Dam Ethernet/RS485 Control Center GPRS SW-7613 Earthquake sensor 66

67 2G GSM Power Saving PAC with Solar charger: G G Support GSM 850/900/1800/1900 MHz Built-in MiniOS7 OS TCP Client, UDP Client Library Solar charger for Lead acid battery Provide Power Saving Library 10/100 Base Ethernet Support microsd Storage Card 128 x 64-dots LCD display(option, not available now) 3 DI/ 3 DO/ 8 AI GPS 32-ch (option) 67

68 Hydrologic / Wind Monitoring Application 68

69 Remote Maintenance Solutions

70 Remote Maintenance Solutions Maintenance Center 70

71 Remote Maintenance Audio Video Remote Diagnosis RS-232 Remote program PLC Editor PLC Machine Remote update Broadcast operator Engineer PLC Editor 總公司 Customer 71

72 Remote Maintenance Solution Item Description Photo M2M-420-A M2M-720-A M2M-520-AV Web-based administration Provide VxComm Function Supply DDNS(Dynamic DNS) Support voice streaming on network Support video streaming on network (M2M-520-AV only) Support Server and Client communication mode Broadcasting and Multi-Client Management M2M-71xD Series Web-based administration Provide VxComm Function Supply DDNS and Ad-hoc mode Support Wireless and ethernet Server and Client communication mode Serial port tunnel Communication Modes 72

73 Advanced M2M Series ITEM M2M-420-A M2M-720-A M2M-520-AV CPU PXA-255 (400MHz) PXA-270 (520MHz) Voice Ethernet Configure DDNS Firmware Update Control Button Function Protocol MIC-in (16-bit) / Speaker-out 10 MHz / 100 MHz Web-base Yes Yes (By FTP) Connect / Disconnect / Default Settings TCP/IP Client and Server (64 clients),vxcomm Static IP / DHCP / PPPoE Video No Yes (320*240) COM Port RS-232 *1 RS-485*1 RS-232 *1 RS-485*1 RS-232 *1 RS-485*1 Casing Metal Plastic Plastic 73

74 High C/P M2M Series ITEM M2M-710D M2M-711D CPU (80MHz) Ethernet 10 / 100 Base-Tx Wireless No b / g Configure Web-base DDNS Yes Firmware Update Yes (By RS-232) Function TCPIP Client and Server (1 client), VxComm Protocol Static IP / DHCP 7 Segment LED 5-Digit COM Port Casing RS pin *1, RS-485*1 Plastic 74

75 RM Device Terminal Unit M2M-710D/711D(Wi-Fi) Support GPRS interface Support RM series client function Provide dynamic DNS function Web-based administration Support Pair connection between 2 RM-710D Watchdog timer suitable for use in harsh environments Serial port +/-4 kv ESD protection circuit Self-tuner ASIC controller on RS-485 port 5-digit display M2M-710D 75

76 M2M-710D/711D Application architecture 76

77 RM Device server M-4132 Support voice streaming on network Provide pair connection on network Web-based administration Linux 2.6 platform Support TCP/IP protocols Provide dynamic DNS function Provide event record and function Built-in web server, FTP server Built-in RTC Built-in self-tuner ASIC chip for RS-485 port 2500V isolated on RS-485 port Provide LED indicators Robust, fan less design CE/FCC, EMI, RoHS compliance M-4132(M2M-420-A) 77

78 M Device server M2M-420-A Support voice streaming on network Provide pair connection (RS-232, RS-485) on network Support server and client function Server mode can manage max 64 clients (Clients can be M-4132, M2M-720-A, M2M-710D ) Support voice broadcast function in server mode Support Virtual COM technology Web-based administration Linux 2.6 platform Provide Static IP/DHCP/PPPoE Provide dynamic DNS function to resolve the problem without the fixed real IP Provide event record and function Built-in web server, FTP server Built-in self-tuner ASIC chip for RS-485 port Provide LED indicators Robust, fan less design CE/FCC, EMI, RoHS compliance 78

79 Remote Maintenance System M2M-420-A M2M-420-A 79

80 Remote Maintenance System M2M-520-AV 80

81 Peer-to-peer application M2M-710D 81

82 Remote Display System 82

83 Remote Maintenance Versatile Architecture 83

84 ZigBee Wireless Solutions

85 New ZigBee Solutions: ZT-2000 Series Products

86 ZigBee Wireless Solutions Item Function Application Product ZigBee AIO Analog Input/Output RTD Input Thermocouple Input Analog signal control ZT-2000 series ZigBee DIO Digital Input/Output Counter Input Module Digital signal control ZigBee Repeater Extend the transmission distance 700 m (Typical) ZigBee Converter Convert various communication signal Ethernet/RS- 485/RS- 232/USB signal converter 86

87 ZigBee Features Low transmission rate and short distance wireless technology Frequency Region Channel Qty Transfer Rate 2.4 GHz Global kbps 915 MHz North America kbps 868 MHz Europe 1 20 kbps Multi-node transfer max nodes within a single network Low power consumption/cost/complexity running over 1 year with 2 AA batteries Power-consuming Unit IEEE b Bluetooth ZigBee Hour Day Year Node Expansibility Roaming possible no Yes Distance 100m 10m 70m~300m Transfer Rate 11 Mbps 1 Mbps 250 Kbps ZT-2000 series 87

88 ZigBee Network Channels & Topology 88

89 ZB-2000 & ZT-2000 Comparison ZB-2000 series ZB-2000-T series ZB-2000-P series ZB-2000-PA series ZT-2000 Series Transmission power 9 dbm 4 dbm 22 dbm 22 dbm 11 dbm Antenna Gain 3 dbi 3 dbi 5 dbi 5 dbi 5 dbi Transmission (LOS) 100 m 100 m 700 m 700 m 700 m Certification No CE/FCC No No CE/FCC Max. Nodes in one network Protocol Private Private Private Private Multi-Hop Routing Mechanism Automatic/S pecific (Not in broadcast) Automatic/Sp ecific (Not in broadcast) Automatic/Sp ecific (Not in broadcast) Automatic/Spe cific (Not in broadcast) ZigBee 2007 Pro Automatic RSSI Indicator No No No No Yes Configuration Complex Complex Complex Complex Simple 89

90 ZT-2000C Common Features Compatible with ZigBee 2007 Pro Transmission Range 75 C -25 C ㄨ RSSI Indicator Auto-routing 90

91 ZT-2000 Series Converter/Repeater Type Model Description Converter ZT-2550 ZT-2551 ZT-2570 ZT-2571 ZT-USBC ZT-USBR Repeater ZT-2510 ZigBee Repeater RS-485/RS-232 to ZigBee Converter (Coordinator) RS-485/RS-232 to ZigBee Converter (Full Function Device) Ethernet/RS-485/RS-232 to ZigBee Converter (Coordinator) Ethernet/RS-485/RS-232 to ZigBee Converter (Full Function Device) USB to ZigBee Converter (Coordinator) USB to ZigBee Converter (Full Function Device) 91

92 ZT-255x Series Features ZigBee to RS-232/RS-485 converter Provide 3-wire RS-232 interface Max. 230 bytes for one data transmission Support Transparent Mode (broadcast), Addressable Mode and Modbus Gateway Mode 5 dbi Omni-Directional antenna (2.4 GHz) Adjustable RF Transmit Power: 10 dbm~19 dbm Sensitivity -97dBm Max. slaves in a ZigBee network:

93 ZT-255x Specifications Models ZT-2550 (ZigBee Coordinator) ZT-2551 (ZigBee Router) Hardware MCU Module 8-bit microcontroller Temp. Buffer Size 230 Bytes Communication Interface RS-232 (TxD, RxD and GND); RS232 D-SUB 9 Female, Non-isolated D-SUB 9 Male, Non-isolated COM 0 RS-485 RS-485 (DATA+, DATA-; internal ASIC self-tuner); Non-isolated Data Format N81 / O71 / E71 / N82 / O81 / E81 Power Protection Power reverse polarity protection EMS Protection ESD, Surge, EFT Supplied Voltage +10V DC ~ +30V DC Mechanical Casing Plastic Flammability UL 94V-0 fire-retardant materials Dimensions (WxLxH) 33 mm x 78 mm x 107 mm Installation DIN-Rail 93

94 ZT-255x Application(1) RS-232 Transparent Mode RS-485 PC or PAC ZT-2550 ZT-2551 Devices #1 RS-485 ZT-2551 Device#2 Device#3 94

95 ZT-255x Application(2) RS-232 Addressable Mode RS-232 PC or PAC ZT-2550 ZT-2551 Device (No Address) RS-232 ZT-2551 Device (No Address) 95

96 ZT-255x Application(3) Transparent Mode RS-232 ZT-2000 Series I/O module PAC or PLC ZT-2550 ZT-2000 Series I/O module ZT-2000 Series I/O module 96

97 ZT-255x Application(4) PC or PAC Ethernet Modbus TCP ZT-2570 Modbus Gateway Mode ZT-2551 RS-485 Modbus RTU Devices #1 ZT-2551 RS-485 Modbus RTU Device#2 97

98 ZT-257x Series Features ZigBee to Ethernet/RS-232/RS-485 converter Allow data from RS-232/RS-485 or Ethernet converted to ZigBee signal simultaneously Support VxCOMM technology for ZigBee port Max bytes for one data transmission Support parameter settings by Web browser. Support Transparent Mode (broadcast), Addressable Mode and Modbus Gateway Mode 5 dbi Omni-Directional antenna (2.4 GHz) Adjustable RF Transmit Power: 10 dbm~19 dbm Sensitivity -97dBm Max. Slaves in a ZigBee Network:

99 ZT-257x Specifications Models ZT-2570 (ZigBee Coordinator) ZT-2571 (ZigBee Router) Hardware CPU Module 80186, 80 MHz or compatible Temp. Buffer Size 2300 Bytes Communication Interface (COM 0) RS232 RS-232 (TxD, RxD and GND) D-SUB 9 Female, Non-isolated D-SUB 9 Male, Non-isolated RS-485 RS-485 (DATA+, DATA-; internal ASIC self-tuner); Non-isolated Baud Rate 1200 ~ bps Data Bit 7, 8 Parity Check Even, Odd, None Stop Bit 1, 2 Communication Interface (Ethernet) Ethernet 10/100 Base-TX (Auto-negotiating, auto_mdi/mdi-x, LED indicators) Power Protection Power reverse polarity protection EMS Protection ESD, Surge, EFT Voltage Input +10V DC ~ +30V DC 99

100 ZT-257x Application(1) Ethernet PC Transparent Mode RS-232/ RS-485 RS-232/RS-485 ZT-2571 Device PAC ZT-2570 Ethernet Ethernet PAC ZT-2571 ZT-2571 PLC 100

101 ZT-257x Application(2) PC RS-232/RS-485 ZT-2570 ZT-2571 Max bytes for a single data transfer RS-232/ RS-485 Device 101

102 ZT-USBx Series (Available Soon) USB to ZigBee Converter PCB Antenna. Transmit range (LOS): max. 100 m VxComm interface. Support XP, Win7, Linux, WinCE. Easy to use by plug & play. Transparent transmission function. Third party software can support this function directly. Power supplied by USB. Sending back station no. and RSSI data or not is optional. Set channels, PANID, node ID by utility. RF Transmit Power: 3dBm Sensitivity -97dBm Max. slaves in a ZigBee network:

103 ZT-USBx Specifications Models ZT-USBC (ZigBee Coordinator) ZT-USBR (ZigBee Router) Hardware MCU Module 8-bit microcontroller Temp. Buffer Size 100 Bytes Communication Interface (USB) Interface USB 2.0 Full-Speed Connector Type A Plug Wireless Interface (ZigBee) RF Transmit Power 3 dbm Antenna Type PCB Antenna Sensitivity -97 dbm Transmit Range (LOS) 100 m Platform Operating System Windows XP, Windows CE, Windows XPe, Windows 7.0, Linux Environment Operating Temperature -25 C ~ 75 C Relative Humidity 10 ~ 95%, non-condensing 103

104 ZT-USBx Application(1) SCADA USB PC ZT-USBC Transparent Mode ZT-2551 RS-232/ RS-485 USB Device PAC ZT-USBR Ethernet ZT-2000 Series I/O module ZT-2571 PLC 104

105 ZT-USBx Application(2) Address & RSSI Information PC USB ZT-USBC Transparent Mode ZT-2551 RS-232 Barcode Reader RS-232 RS-232 ZT-2551 Barcode Reader ZT-2551 Barcode Reader 105

106 ZT-2510 ZigBee Repeater (Slave, ZigBee Router) Supports star, cluster tree and mesh topology. Transmit Range (LOS): 700m (Typical) Sensitivity -97 dbm Auto-route ZigBee signal Provide LED indication for RSSI intensity Utility sets channels, PANID & node ID by USB interface. Type B USB Plug connector Wide operating temperature: -25 C ~ 75 C Max. slaves in a ZigBee network:

107 ZT-2510 Application ZT-2510 PC ZT-2000 Module ㄨ ZT-2000 Module Device ZT

108 ZigBee PAC Series Type Model Description PAC μpac-5801(d) (Available Soon) μpac-5801(d)-fd (Available Soon) μpac-5901(d) (Available Soon) μpac-5901(d)-fd (Available Soon) μpac-5000 with RS-232, RS-485, Ethernet and ZigBee (Coordinator) μpac-5000 with RS-232, RS-485, Ethernet and ZigBee and 256 MB Flash (Coordinator) μpac-5000 with RS-232, RS-485, Ethernet and ZigBee (Full Function Device) μpac-5000 with RS-232, RS-485, Ethernet and ZigBee and 256 MB Flash (Full Function Device) 108

109 upac-5801/5901 Features Inherit features of I-7188 & upac-7186 series. Built-in MiniOS7. C/C++ programming. Can expand 7-segment display & 256 MB NAND Flash. Can expand multiple communication Interface. ZigBee interface supports transparent mode. Can install MicroSD card. Support XB-boards. 109

110 XW-Boards XW107 XW107i XW110i XW304 XW310 XW310C XW506 XW507 XW508 XW509 XW511i XW514 8DI 8DO 16 DI 4DI 4DO 6AI 1AO 3DI 3DO 4AI 2AO 6 RS232 5DI 5D 1 RS422/485 8 RS232 4DI 4DO 2 RS232 4 RS232 8 RS

111 upac-5801/5901 Specification Models upac-5801 (ZigBee Coordinator) upac-5901 (ZigBee Router) upac-5801-fd(zigbee Coordinator) upac-5901 (ZigBee Router) Hardware CPU 80186, 80 MHz or compatible SRAM/Flash 512 kb / 512 kb EEPROM 16 kb MicroSD Up to 2 GB NVRAM 31 Bytes (battery backup, data valid up to 10 years) NAND Flash MB RTC Provide second, minute, hour, date, day of week, month, year 64-bit SN. Yes, for Software Copy Protection WDT Yes (0.8 second) Communication Interface (UART) COM1 RS-232 (TxD, RxD, RTS, CTS, GND), non-isolated COM2 RS-485 (Data+, Data-) with internal self-tuner ASIC; non-isolated Baud Rate 1200 ~ bps Communicaton Interface (Ethernet) Connector 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) Power Protection Power reverse polarity protection, Redundant Power Inputs Input Range +12 ~ +48V DC 111

112 ZT-2000 Series I/O Modules Type Model Description DO ZT ch PhotoMOS relay output, 4-ch open collector output (Available soon) ZT ch isolated DO (Available soon) DI ZT ch isolated DI with 16-bit counter(available soon) ZT ch isolated DI (Available soon) DIO ZT ch isolated DI and 4-ch relay output ZT ch 2/3-wire RTD input (Available soon) AI ZT ch AI ZT-2017C 8-ch AI with current input ZT ch thermocouple input (Available soon) AO ZT ch AO (Available soon) Multi-function ZT ch AO, 4-ch AI, 2-ch DI, 2-ch DO (Available soon) 112

113 ZT-2000 I/O Modules Features Provide various I/O interface. Support DCON & Modbus/RTU protocol. Support start, cluster tree & mesh topology. Wireless Transmission Range (LOS) up to 700 m Auto-route ZigBee signal Provide LED indication for RSSI intensity. Wide operating temperature: -25 C ~ 75 C Max. slaves in a ZigBee network:

114 ZT-2000 DIO Modules Specifications Models ZT-2042 ZT-2043 ZT-2052 ZT-2053 ZT-2060 DO Channels Output Types PhotoMOS Relay, Form A Isolated O.C. Isolated O.C. Load Voltage 60 V DC /V AC +5 V DC ~ +50 V DC +5 V DC ~ +50 VDC Max. Load Curr. 0.7 A ~ ma 700 ma Power Relay, Form A 270 V AC /125 V DC 5 (250 V AC /30 V DC ) Operate Time 5 ms ms Release Time 0.5 ms ms DI Channels Input Impedance 3 kω, 0.33 W Dry Contact No Support No ON Level OFF Level Counter +3.5 V DC ~ +30 V DC +1 V DC Max. 16-bit, Max. Input freq.:100hz, Min. pulse width:5ms 114

115 ZT-2000 AI Modules Specifications Models ZT-2015 ZT-2017 ZT-2017C ZT-2018 Channels Type 2/3-wire RTD Differential Differential Input Types Resolution Pt100, Pt1000, Ni120, Cu100, Cu1000 +/-10 V +/-5 V +/-1V +/-500 mv +/-150 mv +/-20 ma (Requires Optional External 125 Ω Resistor) 16-bit +/-20 ma, 0 ~ 20 ma 4 ~ 20 ma Sampling Rate 12 SPS (total) 10 SPS (total) Accuracy +/-0.05% FSR +/-0.1% FSR Individual Ch. Config. Open TC Detect Overvoltage 120 VDC/110 VAC 240 Vrms +/- 200 VDC 240 Vrms Protection Yes Yes +/-15 mv +/-50 mv +/-100 mv +/-500 mv +/-1VDC +/-2.5VDC +/-20 ma 0 ~ 20 ma 4 ~ 20 ma TC (J, K, T, E. R. S, B, N, C, L, M, LDIN43710) (Requires Optional External 125 Ω Resistor) 115

116 ZT-2024 AO Module Specifications Models ZT-2024 AO Channels 4 Output Types Resolution Accuracy 0 ~ +10 V DC +/- 10 V DC 0 ~ +5 V DC +/- 5 V DC 0 ~ +20 ma +4 ~ +20 ma 12-bit +/-0.1% FSR Zero Drift +/- 30 μv/ Span Drift +/-25 ppm/ Current Output Slope Votage Output Slope Current Load Resistance to 2048 ma/second, Programmable to 1024 V/second, Programmable External +24 V power : 1050 Ω 116

117 ZT-2026 Multifunction I/O Spec DI DO AI AO Models ZT-2026 Channels 2 ON Level 3.5 VDC ~ 50 VDC OFF Level 1 VDC Max. Counter 16-bit, Max. Input Frequency: 50 Hz, Min. Pulse Width: 10 ms Channels 2 Types Isolated O.C Load Volt. +5 VDC ~ +50 VDC Load Curr. 700 ma/channel (Max.) Channels 4 Types +/-10 V, +/-5 V, +/-1 V, +/-500 mv, +/-150 mv, +/- 20 ma (Requires External 125 Ω Resistor) Resolution 16-bit Sampling 10 Samples/Second (Total) Accuracy +/-0.1% FSR Channels 2 Types +/-10 VDC, +/-5 VDC, 0 ~ 10 VDC or 0 ~ 5 VDC Resolution 12-bit Accuracy +/-0.1% FSR Voltage V Capability 117

118 Solar Cell Supervisory System 118

119 AGV Control System 119

120 WLAN Wireless Solutions

121 Wi-Fi Products WLAN Converter M2M-711D I-7540D-WF WLAN I/O Module WF-2042 (2013Q4) WF-2051 (2013Q4) WF-2055 (New) WF-2060 (New) WF-2017 (Oct.) WF-2019 (Oct.) WF-2026 (Oct.) WLAN Bridge WF-2571 (Jun.) Remote maintenance Wi-Fi Device Terminal Unit CAN to Wi-Fi Converter Wi-Fi Data Acquisition I/O Module (16 DO) Wi-Fi Data Acquisition I/O Module (16 DI) Wi-Fi Data Acquisition I/O Module (8 DI / 8 DO) Wi-Fi Data Acquisition I/O Module (6 DI / 6 Relay) Wi-Fi Data Acquisition I/O Module (AI, 8 diff. or 16 SE) Wi-Fi Data Acquisition I/O Module (10 TC) Wi-Fi Data Acquisition I/O Module (5 AI / 2 AO / 2 DI / 3 DO) Ethernet to Wi-Fi Bridge 121

122 Wi-Fi Converter

123 M2M-711D (Remote maintenance Wi-Fi Device Terminal Unit)

124 M2M-711D Features Compatible with IEEE b/g standards Support VxServer software Provide pair connection (RS-232,RS-485) on network Support Server and Client communication mode Support RS-232 or RS-485 serial communication ports Web-based administration Ethernet Protocol: TCP, UDP, IP, ICMP, ARP, RARP Supports IEEE b/g for Wi-Fi mode Supports WEP-64,WEP-128, WPA-TKIP and WPA2-AES encryption Provide dynamic DNS function Supply static IP/DHCP 124

125 M2M-711D Specification Communication Interface COM 1 COM2 Ethernet Port COM Port Formats RS-232(RxD, TxD, RTS, CTS, GND); None-isolation RS-485(DATA+, DATA-); None-isolation 10/100 Base-TX Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, Data bit 7, 8 Stop bit 2 (data bit must be 7 bit) or 1 Parity Ethernet Interface Controller Connector Services None, Even, Odd 10/100Base-TX Ethernet Controller RJ-45 with LED indicator TCP/IP, Web server Wireless Network Module(IEEE b/g) RF channels Receive sensitivity Data encryption Transmit Power Antenna Transmission range (LOS) 1~13; AP mode supports auto control channel -87 dbm(ieee b) / -72 dbm (IEEE g) WPA-TKIP / WPA2-AES / WEP-64 /WEP-128 (It s not supported WPA-TKIP,WPA-AES encryption in Ad Hoc mode) 12 dbm(ieee b) / 14 dbm(ieee g) 2.4GHz - 5dBi Omni-Directional antenna 100M 125

126 M2M-711D Application Remote Maintenance 126

127 M2M-711D Application Pair-connection mode 127

128 I-7540D-WF (CAN to Wi-Fi Converter)

129 I-7540D-WF Features IEEE b/g compliant Wireless data transmission via WLAN Two operation modes: infrastructure and ad-hoc Supports WEP, WPA and WPA2 encryption for wireless LAN CAN 2.0A/2.0B compliant Connect CAN networks via a WLAN bridge Communication efficiency: up to 700 fps Wireless transmission distance: up to 100 meters(los) 129

130 I-7540D-WF Specification CAN Interface Controller CAN Controller inside Transceiver NXP 82C250 Channels 1 Connector 10-pin screw terminal connecter Baud Rate (bps) 5K ~ 1Mbps Isolation 3000 VDC power protection on CAN side, 2500Vrms photo-couple isolation on CAN bus Terminator Resistor Selectable 120Ω terminator resistor by jumper Specification ISO , CAN 2.0A and CAN 2.0B Max Data Flow 700 fps(peak value, one-way) UART Interface Connector 10-pin screw terminal connecter COM1 RS-232(TXD, RXD, GND) Baud Rate (bps) Wi-Fi Interface Antenna 5 dbi (Omni-Directional) Standard Supported IEEE b/g Transmit Power / Receiver Sensitivity / Operation Mode Infrastructure & Ad-hoc Encryption WEP, WPA and WPA2 Frequency Ranges 2.412GHz ~ 2.484GHz Transmission distance Up to 100 meters 130

131 I-7540D-WF Application 131

132 Wi-Fi I/O Device

133 Wi-Fi I/O - Features Compatible with IEEE b/g standards Support Infrastructure and Ad-hoc mode for wireless network Support WEP, WPA and WPA2 wireless encryption Support Modbus TCP/UDP protocol Support Pair Connection mode Support Power on value & Safe value mechanism Built-in Watchdog 133

134 DO DI Wi-Fi Interface Wi-Fi DIO Modules Specifications Models WF-2042 WF-2051 WF-2055 WF-2060 Channels Types Sink (NPN) - Sink (NPN) Form A (SPST-NO) Output Voltage +3.5 ~ +50 V DC ~ +50 V DC - Output Current 700 m A / ch ma / ch. - Contact Rating (250 V AC /30 V DC ) Intra-module Isolation 3750 V DC V DC - Overvoltage Protection 60 V DC - 60 V DC - Counters Channels Input Type Dry Contact Level Wet Contact Level Dry Contact: Source, Wet Contact: Sink / Source Off Voltage Level: Open On Voltage Level: Close to GND Off Voltage Level: +4V max. On Voltage Level: +10V ~ +50 V Channels Max Counts 32-bit ( ) Input Freq. Photo-Isolation Standard Supported Wireless Mode Encryption Transmission Range IEEE b/g Infrastructure & Ad-hoc WEP, WPA and WPA2 100 Meters (LOS) 10 khz (Max.) 3750 V DC 134

135 Wi-Fi AI Modules Specifications Models WF-2017 WF-2019 Channels 8 diff. or 16 SE 10 diff. Input Types Voltage: ±10 V, ±5 V, ±1V, ±500 mv, ±150 mv Current: 0 ~ +20mA, +4 ~ +20mA, ±20 ma (Requires Optional External 125 Ω Resistor) Voltage: ±15 mv, ±50 mv, ±100 mv, ±150 mv, ±500 mv, ±1V, ±2.5V, ±5V, ±10V Current: ±20 ma, 0 ~ 20 ma, 4 ~ 20 ma (External resistor is required) Thermocouple : J, K, T, E, R, S, B, N, C, L, M and LDIN43710 (Requires Optional External 125 Ω Resistor) Resolution Normal Mode: 16-bit, Fast Mode: 12-bit 16-bit Accuracy Sampling Rate Normal Mode: ±0.1% FSR, Fast Mode: ±0.5% FSR Normal Mode: 10 Hz (Total), Fast Mode: 50 Hz (Total) ±0.1% FSR 10 Hz (Total) Open Thermocouple Detection - Yes Individual Channel Configuration Yes Yes Overvoltage Protection 240 Vrms 240 Vrms Standard Supported IEEE b/g Wi-Fi Wireless Mode Infrastructure & Ad-hoc Interface Encryption WEP, WPA and WPA2 Transmission Range 100 Meters (LOS) 135

136 WF-2026 Multifunction I/O Spec. Models Channels / Type WF / Dry Contact Source DI DO AI AO Wi-Fi Interface ON Level OFF Level Counters Close to GND Open 32-bit (4,294,967,285), Max. Input Frequency: 100 Hz, Min. Pulse Width: 5 ms Channels 3 Type Load Voltage Max. Load Current Channels / Wiring Range Resolution Accuracy Sampling Open Collector +3.5 V DC ~ +50 V DC 700 ma/channel 6 / Differential ± 150 mv, ± 500 mv, ± 1 V, ± 5 V, ± 10 V, ± 20 ma, 0 ~ 20 ma, 4 ~ 20 ma (Jumper Selectable) 16-bit Normal Mode: ± 0.1% of FSR, Fast Mode: ± 0.5% of FSR or better Normal Mode: 10 Samples/Second (Total), Fast Mode: 60 Samples/Second (Total) Channels 2 Range Resolution Accuracy Voltage Capability Standard Supported Wireless Mode Encryption +0 ~ +5 V DC, +0 ~ +10 V DC, ± 5 V DC, ± 10 V DC, +0 ~ +20 ma, +4 ~ +20 ma (Jumper Selectable) 12-bit ± 0.1% of FSR ma IEEE b/g Infrastructure & Ad-hoc WEP, WPA and WPA2 136

137 Wi-Fi I/O Applications Pair-Connection application 137

138 Wi-Fi I/O Applications 138

139 Wi-Fi Bridge

140 WF-2571 Features Compatible with IEEE b/g standards Supports Infrastructure and Ad-hoc mode Enterprise Class wireless security (WEP, WPA and WPA2) Plug-and-Play Ethernet to Wi-Fi connectivity USB-based configuration No driver installation required Built-in Watchdog 140

141 WF-2571 Specification Wi-Fi Interface Antenna Standard Supported Network Access Modes Encryption Transmission Range Ethernet Interface Controller Connector USB Interface Type Connector LED Indicators System status Signal strength Power Input Voltage Range 5 dbi (Omni-Directional) IEEE b/g Infrastructure & Ad-hoc WEP, WPA and WPA2 100 meters (LOS) 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) RJ-45 with LED indicator USB 2.0 Full-Speed USB type B 3 Indicator LEDs (PWR, LINK, COMM) 3 Indicator LEDs (High, Mid, Low) 10V ~ 30V Power Consumption 1.6W 141

142 WF-2571 Application Ad-Hoc connection AP connection 142

143 IR Wireless Solutions

144 IR Series Product List IR Learning Remote Module (Learn/Emit IR signal to control appliances) Model Status IR-210 Released IR-712 Discontinued IR-712A Released IR-712-MTCP Available soon IR-210 IR-712A IR Controlled Power Relay Module (For power switching control with IR remote control function.) Model Status IR-310-RM Available soon IR-712-MTCP IR-310-RM 144

145 IR Learning Remote Module Main Function Learning IR commands of electronic appliances. Supports Modbus communication to integrate with the HMI and host controller for the smart home application. IR-210 IR-712A 145

146 IR Learning Remote Module Features Multiple IR outputs for multiple remote devices. Supports 6 IR carrier frequencies which covers most of the IR remote appliances. Can store IR learning commands. Provides RS-232 and RS-485 interface. Supports Modbus protocol with FC 6 & FC16 146

147 IR Learning Remote Module IR Remote Series Comparison Model IR-210 IR-712A IR-712-MTCP IR Output 6 2 IR Cmds Storage 176 => 224 (will be revised) IR Input Communication 1 IR learning input for carrier frequencies: & 56 khz RS-232 and RS-485 Baud rate:9600 ~ bps 10/100 Base-TX, 8-Pin RJ-45 x1 Protocol Modbus/RTU (slave) Modbus/TCP (server) LED Indication Power Installation Size (W x H x D) 3 LED: TR (IR Out) LN (Learning) PWR (Power) 33mm x 107mm x 78mm 2 LED: TR/LN (IR out/learning) PWR (Power) +10 ~ +30 V DC DIN-Rail 52 mm x 95 mm x 27 mm 147

148 IR Learning Remote Module IR-210/IR-712/IR-712A Basic Application Structure IR Learning & data IR Utility IR Remote 148

149 IR Controlled Power Relay Module Main Function of IR-310-RM Power switching control for appliances. IR remote control function and serial communication interface with Modbus/RTU. For the application of power control, light control and energy conservation, etc. IR-310-RM 149

150 IR Controlled Power Relay Module Features 10-ch relays: 10A x 4, 5A x 6 (220 V AC, 25 ) NO/NC and circuit protection for each relay Sequential power control Interlocked power control (Max. 5 sets ) Power-on values and power failure memory for relay status Supports IR remote control RS-232 and RS-485 interfaces Modbus/RTU protocol 150

151 IR Controlled Power Relay Module IR-310-RM Specification Model Relay Outputs IR Interface Communication IR-310-RM 220 VAC for RL0, RL1, RL6 ~ RL9 (Operating Temperature: 25 C) 220 VAC for RL2 ~ RL5 Type:Form C relay SPDT (NC/NO) 1 built-in IR receiver 1 IR input jack (for IR receiver cable) 1 IR output jack (for IR emitter cable) Supports custom 64/built-in 32 IR commands to control the relay outputs. Interface: RS-232(TxD, RxD, GND) and RS-485(DATA+, DATA-) Format: Parity = None, Databits = 8, Stopbits = 1 Baud rate: 9600 ~ bps Protocol Modbus/RTU (slave) Net ID: 1 ~ 15 (hardware) and 1 ~ 247 (software) LED Indication 11 LEDs for power/ir and relay status indication. Power +12 V DC Size 220 mm 48 mm 113 mm (W x H x D) 151

152 IR Controlled Power Relay Module IR-310-RM Application Structure IR-310-RM for power switching control; IR-210 for remote control. E-Classroom, Conference room, home theater 152

153 IR Series Application Smart Home Application integration of remote control and power monitoring. IR-210=>IR remote control; IR-310-RM=>Light control; Smart phone=>remote phone control; PM- 213x=> power monitoring; TouchPAD=>HMI; DL-100TM485=>Thermo-Hygrometer; PAC=>Modbus Master/Slave & Web server. 153

154 IR Series Application ISaGRAF PAC with the IR Remote Application With the ISaGRAF PACs integrating the IR modules and devices, users can easily to establish the home automation system. (Link) 154

155 IR Series Application Smart Phone/Tablet PC Controlling the Home Appliances 155

156 Thank You