Reliability through Quality and Simplicity

Transcription

1

2 For well over a decade ikon AVS have been at the forefront of creating innovative audio visual and control solutions. A selection of key benefits: Innovative AV control and connectivity products UK design and manufacture to highest standards for reliability Pre- sales & technical support Products fit standard UK socket boxes Knowledgeable and friendly staff Many products are available as cost effective bundled solutions ikon engineers have over 00 years combined experience in the design and installation of audio and AV systems and we are here to provide you with specialist help and advice. Reliability through Quality and Simplicity Reliability through quality and simplicity is our design principle: only components of the highest quality are used throughout, design is kept as simple as possible to increase reliability and reduce costs. All ikon AVS products carry a three year RTB warranty, selected ranges carry a lifetime warranty.

3 Controllers Audio Simple projector controllers...page Simple control amplifier...page 3 Audio controller...page 6 Audio routing system...page 7 Integrated contol system...page 4 Synergy controllers...page 5 Amplifiers...Page 8 Connectivity PRO Solutions Dado panels...page 9 Euro panels...page 0 Euro frames...page Podule control system...page 4 Modular solutions...page 6 Desk access... Floor panels...page 3 Critical system audio distribution...page 6 Adapters...Page 6

4 SPC Simple projector controllers The ikon AVS SPC series are cost effective, entry-level control interfaces for display devices, including LCD and DLP Projectors as well as LCD and Plasma displays. All SPC controllers feature an orange backlit power button with two or three green backlit input select buttons and a blue backlit picture blank button. On the SPC 6 and 7 two additional backlit buttons are provided for volume raise and lower. The controllers feature a bi-directional RS-3 interface for control of the display and two open collector outputs for the control of an electric screen via a SPC-PP or external relays. An input is provided for room occupancy detection, panel lockout or remote system shutdown. To program the unit it is only necessary to download a library module for complete control over the display, although full control over input selection, warm up and cool down times is provided. The installer can also set up a four-button sequence to lock and unlock the panel's operation. The SPC series are fabricated on a 50 mm Euro module allowing their use in a wide range of wall panels in UK, European and NZ formats. This format also allows the easy combining of control and input panels as well as use in the Ikon range of desk modules. Supplied complete with a UK white mounting frame. For more details go to

5 SC-AMP Simple Control Amplifier The Simple Control Amplifier (SC-AMP) is the ideal audio video solution for small and medium size rooms. Cost effective and offering energy saving opportunities, it is also easy to specify and simple to install. The SC-AMP is a combined entry-level projector or display controller, a 0 watt stereo amplifier and convenient laptop connection or laptop and USB connection. All on a two-gang white metal panel that fits a standard 35mm UK back box. Although it can be easily programmed, the SC-AMP can be supplied pre-programmed for your choice of display. Featuring automatic shut-down to save power and panel lock-out to prevent unauthorised use, the amplifier can also be used on its own when the projector isn t required. Simply plug an audio source into the 3.5mm jack on the front and it will automatically turn on the amplifier. The internal stereo amplifier is an 86% efficient class D design with a RMS output of 0 watts per channel into 8 Ohms. It is fitted with screw terminals for power, speakers and inputs on the rear for permanent connections and a 3.5mm stereo jack on the front panel. For more details go to 3

6 ics-0 Integrated control system The ics-0 incorporates a fully configurable control system along with routers to handle XVGA, Component video, Composite video and ten channels of audio. There is also a microphone input as well as both front and rear expansion slots. The ics-0 provides: 4 into + XVGA & Component video switch 4 into + Composite video switch 0 into stereo audio switch with a master volume control and balanced outputs Microphone input with both local and remote mute x Bi-directional RS3 serial ports Motorised screen, projector lift and power control Room occupancy support Projector control PodNet to communicate with other Ikon Podules Designed for the installation market, the ics-0 offers a versatile combination of facilities and control options allowing its use as a stand alone switch / controller or use it with Octo, Wall or Touch Podules. It can also be controlled by third party panels using one RS3 port whilst retaining the display control function via the second RS3 port. The ics-0 features bi-directional RS3 interfaces for control over the display and other peripheral equipment, therefore it allows handshaking to ensure synchronisation of the devices. The two open collector outputs can be used for the control of electric screens, projector lifts or projector power, whilst two contact inputs are provided for room occupancy shutdown, volume control or remote system shutdown. 4 For more details go to

7 Synergy Synergy range of controllers Extensive onboard facilities, quick and easy programming and simplicity of expansion and linking, are key benefits of this innovative range of controllers. A bi-directional RS3 port provides control over displays and other RS3 devices whilst IR ports supporting either single or dual emitters are provided for control of amplifiers, lighting and video players. RS3 and IR commands can be loaded from embedded libraries or user created files. Two outputs provide control of external relays and indicators and these can use the built-in screen, protector lift and power control routines, or they can be configured to operate other devices. Inputs are available for use with external buttons; either operating in parallel with the panel or as extra buttons. They can also be used for room occupancy detection with a PIR, or used to remotely shut the system down. The Syn-Link port provides linking of panels in multi-room systems, connection to Synergy peripherals or RS3 port to control other equipment. Using the Syn-Link port, panels can be linked as either Master / Slave, Slave / Master or Dual Master configurations with no software overheads or additional programming. This port is also used to connect the AU4 series of audio controllers, again with simple tick box programming. The Syn-Link port can also be used to connect the Synergy panel to a PC enabling two way control. Synergy panels all fit a standard depth UK back box and are provided with detachable screw terminals for ease of installation. For more details go to 5

8 AU4 Audio controller The AU4 is a serial controlled four input audio switcher and volume control. It also provides a microphone input, which is mixed with the program audio. The AU4 audio controller is available in two versions: AU4L provides line level outputs on RCA sockets. AU4P as the AU4L but also incorporates a 0 watt per channel amplifier. The microphone input has switchable phantom power and a selectable hi-pass filter. It also has its own level control and EQ. The microphone is mixed with the program audio after the remote volume facility and the microphone can be turned on and off either remotely via the Synergy panel, or using a push button connected to terminals on the audio controller. When an input is selected the volume can be adjusted with any change stored against the input. Dip switches on the rear of the unit allow either full range (+5 to 48dB ) or limited range (+5dB to 5dB), The default level can also be set as fixed (0dB), or retaining the last setting. The AU4 is designed to operate in conjunction with either the Synergy or SPC controllers but can also be used as a stand-alone RS3 controlled audio system. 6 For more details go to

9 Matrix Audio routing system Use as the heart of a distributed audio system, as the router for a multi room system or as part of a complex boardroom system, the ikon Matrix Podule offers an easily controlled and configured central stereo audio processor with individual level control of each output. It is also ideally suited for multiroom audio and headphone distribution system when used with the remote panels. Inputs are unbalanced via 3.5 mm stereo jacks; whilst all the outputs are balanced and share individual RJ45 sockets with control and DC power, allowing a single Cat5 cable between the Matrix and its remote outlets and control panels. M-C M-HC M-BM M-US 50mm Euromodule providing remote control and indication of the Matrix input and volume. It is fitted with rear panel balanced audio outputs on screw terminals Contains a local headphone amplifier with remote control of the Matrix for input source and volume all on a 50 mm Euro module A series of mono, stereo, balanced and unbalanced audio Euromodule audio panels are also available for terminating to external amplifiers The current output assignments are shown on the front panel LCD and the Matrix also incorporates multiple selectable operating configurations, volume range setting and online level trimming expanding its abilities beyond simple audio switching. The Matrix can also be controlled via RS-3 or connected via PodNet using a single Cat5 cable to allow remote selection of input sources and volume control from individual rooms or centrally from our Wall, Euro and Touch Podules. For more details go to 7

10 SGA-40 & DPA-40 Amplifiers The SGA-40 and DPA-40 are the ideal audio video solution for small and medium size rooms, offering cost effective and energy saving opportunities, they are easy to specify and simple to install. Both amplifiers are 0 watt per channel stereo wall and dado mounting. They are ideal for multi-room audio, classroom, hotel bedroom and small meeting room applications. They use an 86% efficient class D design and have a RMS output of 0 watts per channel into 8 Ohms when powered from an 5V power supply or 0 watts when powered by the included V power supply, and as most quality loudspeakers are 8 Ohms, maximum efficiency is assured. Additionally the amplifiers adopt an ultra low power standby state when no signal is present. The SGA-40 is manufactured in the 50mm euro format and supplied complete with a UK size white mounting frame. Alternative frames are available in a wide range of finishes from ikon AVS as well as other reputable switch plate manufacturers. The SGA-40 fits a standard UK single back box and requires only a 35mm depth. It will also fit the single DIN back box. It is fitted with two rear inputs on screw terminals for permanent connections and two 3.5mm stereo jacks on the front panel for other sources. The DPA-40 is manufactured on a twin gang steel plate where ultimate durability is required. The DPA-40 fits a UK back box and requires only a 35mm depth. It is fitted with screw terminals for speakers and inputs on the rear and a 3.5mm stereo jack on the front panel for other sources. Additionally the amplifier has remote shutdown ability adopting an ultra low power standby state. 8 For more details go to

11 Dado Panels Connection panels Designed for use in Dado trunking or standard UK back boxes, this range of pre-engraved panels is available with a wide variety of panel and internal connector configurations. The panels utilise high quality Crabtree blanks and are machined on the back to recess the connectors, achieving both the required mounting depth as well as greatly enhancing the panels strength Selection of single gang plates DADO-G DADO-G-J DADO-G-P DADO-G-PC DADO-USB DADO-G-AB DADO-G-STA D 5 pin L+R Phono buffered Video Phono 3.5mm jack USB Plastic Stainless Stee white steel only Selection of twin gang plates DADO-G-P DADO-G-J DADO-G-PC DADO-G-USB DADO-G-AB DADO-WB-BU D 5 pin + buffered + buffered L+R Phono Video Phono 3.5mm jack USB Plastic Stainless Stee Our confidence in the quality of our Dado Panels extends to a lifetime warranty* against breakage, this is in addition to our usual 3 year warranty. Can't see what you want, see our web pages for more options, or contact us for our custom plate service. # Terms and conditions apply For more options go to 9

12 Euro Panels Connection panels A versatile range of Audio Visual 'snap in' modules to fit the 50mm Euro frame format. Ideal for all installation requirements where a mix of connectivity is required. A selection of 5mm panels EP-A5 EP-V5 EP-CP5 EP-PC5 EP-GC5 EP-USB5 EP-SV5 EP-JK5 EP-SPK5 EP-CA5 EP-CS5 EP-AB5 D 5 pin L+R Phono buffered Video Phono Component video 3 Phonos 3.5mm jack USB GC-FF 4mm speaker Coax aerial F'type coax S-video A selection of 50mm panels EP-PC50 EP-PC50V EP-PC50J EP-DVI50-ST EP-AB50-ST EP-XLR50 EP-HDMI50 EP-HDMI50-90-AV EP-HDMI50-90-VV EP-HDMI50-90-CV EP-DPJ EP-DPA D 5 pin buffered L+R Phono Video Phono Component video 3 Phonos 3.5mm jack HDMI DVI Display Port XLR Can't see what you want, see our web pages for more options, or contact us for our custom plate service. 0 For more details and options go to

13 Euro Frames Connection Panels White plastic Satin brushed stainless steel EP-00FW EP-00FSB Black plastic EP-50FW Satin brushed brass EP-50FSB EP--GB x 50mm aperture Back box depth = 47mm Overall size 64mm x 96mm EP-400GW x 00mm aperture Back box depth = 45mm Overall size 50mm x 5mm EP-00FB EP-00FBB EP-50FB Chrome plated cast alloy EP-00FC EP-50FC Satin chrome EP-00FSC EP-50FBB EP-50FSC EP--GW x 50mm aperture Back box depth = 47mm Overall size 64mm x 96mm EP-00GW x 00mm aperture Back box depth = 45mm Overall size 50mm x 85mm Can't see what you want, see our web pages for more options or contact us for our custom service. To see complete range go to

14 Desk Access Connection panels For use with the ikon AVS Euro Panels, Euro Podules, SPC controllers and SGA-40 amplifiers, this range of desk access modules enables their use in or on desks and cabinets. RDM-6H Flip top horizontal Desk Access Module supplied in a black and silver finish. Constructed from an aluminium extrusion it has 50mm of available space for 6 x 5mm or 3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro Panels to suit your application. It is supplied complete with a 3A socket* and a fixed m mains cable. For mounting only a 34mm x 33mm cut out is required. RDM-6V Slide out vertical tower that has 50mm of available space for 6 x 5mm or 3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro Panels to suit your application. Constructed from an aluminium extrusion with a moulded top cover, it is supplied complete with a 3A socket* and a fixed m mains cable. For mounting, only a single 80mm diameter hole is required. Overall diameter is 04mm and the RDM-6V extends 5mm above the desk. It is rated to IP54 when closed SDM-6H Desk mounting horizontal module with 50mm of available space for 6 x 5mm or 3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro Panels to suit your application. Constructed from an aluminium extrusion with moulded end covers, it is supplied complete with a 3A socket* and a fixed m mains cable. It is only 0mm deep, 88 mm high and 364mm wide. Wider versions are available to order. * Schuko, CEE7 and IEC alternatives available to order For more details go to

15 Floor Box Panels Connection panels Quick and easy to install floor box panels in both flat and angled versions and designed to fit most Crabtree, Britmac, Powerplan and MK floor boxes. Other sizes are available. The AFB range has been designed with a recess to make connecting easier and have a flush finish when installed. The PC versions all have screw terminals for both VGA and Audio to eliminate the need for soldered connections on site whilst the HDMi, Displayport and DVI versions utilise angled back to back connections for use with pre-made cables. AFB-66-P AFB-75-P AFB-87-P AFB-00-P Size 66 x x x 73 0 x 75 The FBP range is designed to take our standard 5mm and 50mm Euro modules. Custom panel sizes are available on a short lead time. EP-FBP50 EP-FBP00 Aperture 50mm 00mm Panel size 75 x 75mm For more details go to 3

16 Podules Podule controllers A range of innovative control interfaces providing easily programmed control for dedicated applications. Each Podule can be used as a separate intelligent controller or as part of a more complex system, formed by connecting several Podules together with low cost CAT5 cabling. Whilst hard to believe, not all system requirements can be met from out standard range of products. For the more demanding and unusual requirements we have a range of control and interface products specifically engineered for these situations. As each Podule is intelligent a system can start with a single Podule and then extra units can be added to create a system using this distributed processing to create diverse control applications making the Podule ideal for mission critical systems. Systems can be installer programmed using the supplied software or, using our low-cost programming service, they can be shipped pre-programmed for your application. Our Pro Solutions range includes:- Controllers Based upon our Podule system, specialised controllers are available for use individually or networked together to create diverse control applications. These are also suitable for mission critical systems where status feedback and redundancy are required. Installation Accessories The little problem solvers that often make the difference in delivering the system your client wants. From a range of din rail mounting audio and interface adapters through to connection adapters for use in custom panels, the ikon Pro range contains many useful devices all designed to make the installer life easier. PAVA and Fault Monitoring Specialised products for the distribution and monitoring of critical path audio using dual redundant fibre-optic or Cat5 networks. Euro 8 Octo Wall 5 Wall 6 PNP 8 CIR-R Chrono XVGA Relay Bi-directional RS3 port Buttons LED's 8 bi-colour green/yellow 8 green 0 green 6 green 8 green Infra-red outputs 4+ blaster Inputs 8 8 Open collector outputs 8 4 Other user can label buttons user can label buttons A range of pre-engraved buttons are available A range of pre-engraved buttons are available user can label buttons, PodNet only inputs analog capable + analog outputs 4 hour, 365 day event timer 4 x : XVGA and stereo audio switcher 4 inputs analog capable + 4 x 40v relays For the complete ikon Pro range vist out specialised website at 4 For more details go to

17 Podules Podule controllers Euro 8 PNP-8 Relay Octo Wall 5 Wall 6 Chrono XVGA CIR-R For more details go to 5

18 PRO Solutions Modules, adapters, audio ikons range of Din-Rail interfaces cover both audio, video and control options all engineered for quality, reliability and ease on integration. Just a small selection are shown here, please refer to the website for the complete range along with technical specifications and application diagrams. DM-3 DM-485 DM-Relay DM-Balance DM-Serial DM-MIC DM-MIX DM-Line DM-VDA4 into RS3 active splitter BiDirectional RS3 to RS485 converter Four SPCO relays with screw terminals x line level audio isolating and balancing transformers 8 x RS3 controlled open collector outputs. Ideal for use with the DM-Relay Twin Hi-Quality microphone pre-amplifier with phantom power and adjustable gain Dual balanced line level audio mixing and distribution amplifier Unbalanced to balanced line sending amplifier Four channel, four output CVBS distribution amplifier No one offers a more comprehensive range of high quality, British made adapters than ikon AVS. With options covering most analogue and digital signals, both passive and active formats are available. A selection of our adapters DADO-90P FBA- DADO-ST DADO-STA HDMI-BB HDMI-90BB HDMI-ST DVI-ST USB-ST RJ45-ST X3-ST HD5-90 D9-90 SAB-BNC DAB-BNC DAB-5D DAB-ST AB-5 Main connector 5 pin D 5 pin D 5 pin D 5 pin D Jack HDMI HDMI HDMI DVI USB RJ45 XLR 5 pin D 9 pin D 5 pin D 5 pin D x 5 pin D x 5 Pin D x L+R phono Secondary connector 5 pin D 5 BNC ST ST HDMI HDMI ST ST ST ST ST 5 pin D 9 pin D 5 BNC 5 BNC 5 pin D ST ST ST = Screw terminal Comment 90 deg in-line 90 deg 90 deg 90 deg active buffer x active buffer x active buffer active buffer active balanced The ikon AVS DAI mk4 is a fibre-optic audio distribution system for critical systems. It uses dual, continuously monitored redundant fibre rings. If a fault is discovered the signal path is automatically rerouted through the remaining operation fibres. Inputs and outputs are balanced line level. The control port supports selective paging and channel routing as well as allowing the connection of a single RS3/RS4/RS485 data channel with a maximum baud rate of 38,400 carried transparently over the same network as the audio. 6 For more options and details go to

19 UK Manufacturer Advice and Technical Services IKON AVS is an electronic engineering and manufacturing company based near Kidderminster in the heart of England. Our products are available direct or through distributors and dealers throughout the world. For dealer and OEM enquiries please contact us directly at ikonavs.com Getting it right for our customer and the end user is paramount. We provide help in the form of advice in specifying systems all the way to application diagrams. What's more our highly qualified engineers are available to speak to you direct. Stock Items & Delivery Extensive warranties Standard products are available from stock here in the UK making delivery fast and efficient. Non-stock items and custom variants are available. Our ethos is 'Reliability Through Quality and Simplicity' therefore we aim to make the need for warranty unnecessary however for your peace of mind extensive warranties are included with our products. All ikon AVS products are backed by a3-year parts and labour warranty. With selected products carry a lifetime warranty against breakage. CE conformity For your peace of mind all our products carry the CE mark. This ensures that products meet the essential requirements of all relevant EU directives for electrical safety, emissions and immunity to external interference. Energy Saving Most products have energy saving features such as automatic shutdown and links to PIR sensors. Technical Support Committed to providing the very best support IKON AVS can be contacted on +44 (0) support@ikonavs.com web

20 ikon AVS Ltd, Unit 38, Ikon Trading Estate, Droitwich Rd, Hartlebury, Worcestershire, DY0 4EU United Kingdom. Tel: +44 (0) Fax: +44 (0) web: