Guía de Productos en STOCK BECKHOFF 19 de OCTUBRE de 2016

Transcription

1 Guía de Productos en STOCK BECKHOFF 9 de OCTUBRE de 206 DEMOS Demorack for training and presentation purposes, including the following components: BC9050: Compact Bus Terminal Controller with integrated IEC 63-3 PLC, 48 kbytes PM. KL404: 4-channel digital input terminal 24 V DC for 2-wire sensors type 3, IEC 63-2, filter 3.0 ms 2 KL234: 4-channel digital output terminal 24 V DC, 0.5 A with polarity protection Demorack BTBCS2 KL3062: 2-channel analog input terminal 0 0 V, singleended, 2 bit KL4002: 2-channel analog output terminal 0 0 V, 2 bit KL900: Bus end terminal KL9200: Power supply terminal with fuse, 24 V DC KL3202: 2-channel input terminal PT00 (RTD) for resistance sensors, 6 bit, 3-wire 2 KL04: 4-channel digital input terminal 24 V DC, filter 3.0 ms

2 Demorack BTCXS5 Demorack for training and presentation purposes, including the following components: CX : Basic CPU module CX900, E-bus, TwinCAT NC run-time EL004: 4-channel digital input terminal 24 V DC, filter 3.0 ms, 2-wire EL084: 8-channel digital input terminal 24 V DC, filter 3.0 ms, -wire EL2004: 4-channel digital output terminal 24 V DC, 0.5 A, 2-wire EL2622: 2-channel relay output terminal 230 V AC, 2 A, potential-free make contacts, EL3062: 2-channel analog input terminal 0 0 V, singleended, 2 bit EL90: Bus end cap EL990: Power supply terminal for any voltage up to 230 V, without LED EL9200: Power supply terminal with fuse, 24 V DC EL2502: 2-channel pulse width output terminal 24 V DC, A, 4-wire

3 Demorack AX5000 AX Digital Compact Servo Drive, 2-axis module, VAC rated current 2 x 3 A, EtherCAT interface AM302-0C30 Servomotor, Mo=0,48Nm, Io=,58A, nn=8000 rpm single-turn absolute encoder, 2048 sine periods / rev AM302-0C40 Servomotor, Mo=0,48Nm, Io=,58A, nn=8000 U/min multi- turn absolute encoder, 2048 sine periods / revand 4096 absolute turns CX Embedded PC, DVI/USB, Windows CE, TwinCAT-NC-I-Runtime EL432: 2-channel analog output terminal -0 V +0 V, 6 bit EL004: 4-channel digital input terminal 24 V DC, filter 3.0 ms, 2-wire EL2004: 4-channel digital output terminal 24 V DC, 0.5 A, 2- wire EL2004: 4-channel digital output terminal 24 V DC, 0.5 A, 2- wire EL302: 2-channel analog input terminal -0 V +0 V, differential input, 6 bit EK0: EtherCAT extension

4 C9900-Z32 Set multitouch Demo BECKHOFF CONTROL PANEL C : Intel Core i5 2.5 GHz. 2 x 2048 MB DDR3-RAM 80 GB SATA 24VDC. 2 RJ45 Ethernet 4 USB DVI Puerto Serial Com. CU : USB Extender Tx CP inch display 366x768, multi-finger touch screen. Fuente 24VDC. CP C9900-K624 Multi-touch Control Panel CP29xx. 7-inch display 800 x 480 connecting kit 5 m for CP29xx-0000, containing: 5 m DVI cable, 5 m USB cable PANEL PCS CP Built-in Panel PC with ARM Cortex - A8, 7-in display 800x 480, Single Touch C9900-S707 TwinCAT NC run-time for Windows Embedded Compact 7 C9900-H800 2 GB tarjeta microsd, en lugar de 256 MB tarjeta microsd

5 CP Built-in Panel PC with ARM Cortex - A8, 7-in display 800x 480, Single Touch C9900-S706 TwinCAT PLC run-time for Windows Embedded Compact 7 C9900-H800 2 GB tarjeta microsd, en lugar de 256 MB tarjeta microsd CP Economy built-in Panel PC, 2-inch display 800 x 600, without keys, touch screen. Intel Atom Processor. 24VDC. C9900-S70 TwinCAT PLC run-time for Microsoft Windows CE C9900-H504 2 GB Compact Flash card, extended temperature range, instead of 64 MB Compact Flash CP Panel PC CP26xx-0000, 7pulgadas display 800 x 480, pantalla multi-toque C9900-S706 0 TwinCAT PLC run-time for Windows Embedded Compact 7 C9900-H GB tarjeta microsd, en lugar de 256 MB tarjeta microsd CP Panel PC ARM Cortex-A8, 5.7'' 640 x 480, only, with single-touch screen IP65 C9900-S706 TwinCAT PLC run-time for Windows Embedded Compact 7 C9900-H800 2 GB tarjeta microsd, en lugar de 256 MB tarjeta microsd

6 CP Stainless steel Panel PC in IP inch display. 024 x 768. With Single touch screen, push-buttons and USBsocket. Intel Atom Processor. 24VDC. C9900-K604 signal and power supply cable for CP770x-40 and CP790x-40, length 0 m, 8 x 0.75 mm², assembled, M23 connector IP 65, screw type, 9-pin, second end open C9900-R244 memory extension to 2 GB DDR2R AM, instead of GB C9900-S70 TwinCAT PLC run-time for Microsoft Windows CE C9900-M77 Rotatable mounting arm adapter for Control Panel CP790x- 40x or Panel PC CP770x-40x C9900-M67 holder welded on a tube (length:.50 m, bore: 48 mm) for mounting arm adapter C9900-M77 C9900-K605 connecting cable RJ 45, CAT 5, 5 m, one end with IP 65 connector cover for Panel PC CP77x EMBEDDED PC Basic CPU module CX2020, Windows Embedded Standard CX P, TwinCAT 2 PLC run-time, TwinCAT 2 NC run-time, TwinCAT 2 NC I run-time CX Power Supply. E-bus / K-bus CX CX540-N020 Basic CPU module CX5020, E-bus, Microsoft Windows Embedded Standard 2009, TwinCAT 2 PLC run-time audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5. Surround

7 CX803 2 DIN rail Industrial PC - Profibus CX DIN rail Industrial PC CX809 Embedded PC with Bacnet CX CX Basic CPU module CX9000, 32 Mbyte Flash/28 Mbyte RAM, DVI/USB, E-bus, TwinCAT 2 PLC run-time. Intel IXP MHz. Processor. Basic CPU module CX9020, TwinCAT 2 PLC run-time GHz ARM Cortex -A8,256 MB microsd card GB DDR3-RAM,28 KB NOVRAM x DVI-D interface, 2 x microsd card slot Operating :Microsoft Windows Embedded Compact 7 ACCESORIOS C9900-H360 8 GB USB Stick, USB 2.0, with Beckhoff Service Tool (BST) for Backup and Update C9900-U330 battery pack for PCs with 24 V power supply and integrated UPS C9900-P209 or C9900-U209, external, for DIN rail C9900-P927 Conector para panel PC o Control panel 5 pines

8 ETHERCAT COUPLERS EK00 EtherCAT Coupler for E-bus terminals (ELxxxx) EK0 8 EtherCAT extension EK84 2 EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: 4 digital inputs 24 V DC, filter 3.0 ms, type 3 4 digital outputs 24 V DC, 0.5 A, -wire EK88 EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: 8 digital inputs 24 V DC, filter 3.0 ms, type 3 4 digital outputs 24 V DC, 0.5 A, -wire ETHERCAT TERMINALS - DIGITAL INPUTS EL channel digital input terminal 24 V DC, filter 3.0 ms, 2- wire EL channel digital input terminal 24 V DC, filter 3.0 ms, - wire EL channel digital input terminal 24 V DC, filter 0 µs, -wire EL channel digital input terminal 24VDC, filter 3.0 ms, type 3 EL89 6-channel digital input terminal 24 V DC, filter 0 μs, type 3 EL channel digital input terminal, TwinSAFE, 24 V DC

9 ETHERCAT TERMINALS - DIGITAL OUTPUTS EL channel digital output terminal 24 V DC, 0.5 A, 2-wire EL channel digital output terminal 24 V DC, 0.5 A, -wire EL channel relay output terminal 25 V AC/30 V DC, 0.5 A AC/2 A DC, potential-free make contacts EL channel digital output terminal 24 V DC, 0.5 A, -wire EL channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A ETHERCAT TERMINALS - ANALOG INPUTS EL channel analog input terminal 4 20 ma, differential input, 2 bit EL channel analog input terminal 4-20 ma, single-ended, 2 bit, 4 x 2-wire EL channel analog input terminal 4 20 ma, single-ended, 2 bit, -wire EL channel analog input terminal 0?0 V, single-ended, 2 bit EL channel analog input terminal 0 0 V, single-ended, 2 bit, -wire EL channel analog input terminal 0?20 ma, differential input, 6 bit EL channel analog input terminal 0?0 V, single-ended, 6 bit EL channel input terminal PT00 (RTD) for resistance sensors, 6 bit, 2-, 3-wire EL334 4 Módulo 4 entradas Termocupla tipo K, detección lazo abierto,6 bit EL channel input terminal, precise load cell analysis (resistor bridge), 24 bit EL "3-phase power measurement terminal, max. 500 V AC 3~, max. 5 A, via measuring transformers x A/5A"

10 EL channel resistance measurement terminal high-precision EL3773 Power Monitoring Oversampling Terminal ETHERCAT TERMINALS - ANALOG OUTPUTS EL channel analog output terminal 0?0 V, 2 bit EL channel analog output terminal 0?0 V, 2 bit, 4 x 2-wire EL channel analog output terminal 4-20 ma, 2 bit, 4 x 2-wire EL channel analog output terminal 4-20 ma, 2 bit, -wire EL channel analog output terminal -0 V +0 V, 2 bit, - wire EL channel analog output terminal -0 V +0 V, 6 bit ES channel analog output terminal 4 20 ma, 2 bit, 4 x 2- wire ETHERCAT TERMINALS SPECIAL & COMMUNICATION EL50 0 Incremental encoder interface with differential input, 6 bit EL55 -channel incremental encoder interface, 32 bit EL600 Serial interface RS232 EL602 Serial interface RS422/RS485 EL620 AS-interface master terminal EL660 0 Ethernet EL663 0 PROFINET IO controller terminal EL PROFINET slave terminal EL6652 EtherNet/IP master terminal EL673 0 PROFIBUS master terminal

11 EL PROFIBUS slave terminal EL675 CANopen master terminal EL6752 DeviceNet master terminal EL6900 TwinSAFE PLC ETHERCAT TERMINALS DRIVE TERMINAL EL704 Stepper Motor Terminal EL720 2 Servomotor terminal 50 V DC, 2.8 ARMS/4 A (peak value) EL72 3 Servomotor terminal 50 V DC, 4.5 ARMS/6.3 A (peak value) ETHERCAT TERMINALS SYSTEM TERMINAL EL90 7 Bus end cap EL900 2 Passive potential feed terminal, 24VDC EL990 Power supply terminal for any voltage up to 230 V, without LED EL Power supply terminal with fuse, 24VDC EL950 Power supply unit terminal 24VDC, output 0 V DC, 0.5 A EL952 2 Power supply unit terminal 24VDC, output 2 V DC, 0.5 A EL AS Interfase potencial feed terminal with filter ETHERCAT BOX EP EtherCAT Box, 8 digital inputs, 24 V DC, filter 3.0 ms, M8; I/O connection with connector: M8, screw-type EP EtherCAT Box, 8 digital inputs, 24 V DC, filter 3.0 ms, M2; I/O connection with connector: M2, screw-type EP EtherCAT Box, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, IMAX = 0.5 A, M8; I/O connection with connector: M8, screw-type

12 EP EtherCAT Box, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, IMAX = 0.5 A, M2; I/O connection with connector: M2, screw-type ETHERCAT BOX - ACCESORIES ZK ZK ZK Fieldbus cable EtherCAT, PUR cable, Highflex, straight plug, straight plug, M8, M8, screw type, shielded, 4-pin, 0.3 m Fieldbus cable EtherCAT, PUR cable, Highflex, straight plug, straight plug, RJ 45, M8, screw type, shielded, 4-pin, 0.40 m Power cable, straight socket, straight plug, M8, screw type, 4-pin, 0.34 mm², 0.0 m ZK Power cable, straight socket, open end, M8, screw type, 4- pin, 0.34 mm², 2.00 m BUS CONTROLLERS BC8050 Controlador (PLC) RS kbytes program memory BC Controlador PLC, 48 kbytes program memory, Ethernet TCP/IP interface; Ethernet protocols TwinCAT ADS, Modbus TCP

13 BC99 2 Controlador (PLC) Ethernet (Room Controller). Ethernet TCP/IP interface and integrated 2-channel switch Program memory: 48 kbytes Supply voltage: 230 V AC Ethernet protocols: TwinCAT ADS, Modbus TCP Sub bus : connection to EnOcean KL6583 K-bus interface on board I/O: 3 digital inputs 3 analog inputs V analog input PT/NI000 ( C) analog input, resistance measurement for set value specification digital relay output 230 V AC, 0 A 3 digital relay outputs 230 V AC, A 2 digital triac outputs 230 V AC, A 2 analog outputs 0 0 V BUS COUPLERS BK20 2 Acoplador EtherCAT BK320 Acoplador PROFIBUS BK350 0 Acoplador PROFIBUS BK Acoplador Modbus. BK7350 Acoplador Modbus. BK Acoplador Ethernet. Puerto RJ45. BK9053 Acoplador Profinet Puerto

14 BK905 2 Acoplador Ethernet/IP. 2 Puertos RJ45. BUS TERMINALS - DIGITAL INPUTS KL channel digital input terminal 24VDC, filter 3.0 ms, KL24 4-channel digital input terminal 5 V DC, filter 0.2 ms, KL34 3 KL408 6 KL50 2 KL KL809 9 KM channel digital input terminal 24 V DC for 2-wire sensors type 2, EN 63-2, filter 0.2 ms 4 inputs 2-wire, 4 bit inputs 8-channel digital input terminal 24 V DC, IEC 63-2, type 3, filter 3.0 ms, -wire Up/Down Counter 24VDC 00KHz. 32 bit. Funciona como Contador de 32 bits o 2 Contadores de 6 bits. 2-channel digital input terminal 20 V AC to 230 V AC, 4- wire 6 channel digital input terminal 24VDC, filter 3.0ms type 3 6-channel digital input terminal module 24 V DC, filter 3.0 ms, -wire connector with LEDs BUS TERMINALS - DIGITAL OUTPUTS KL channel digital output terminal 24 V DC, 0.5 A with polarity protection, 2 outputs 3-wire s, 2 outputs - wire KL channel digital output terminal 24VDC, 0.5 A with polarity protection, 2-wire KL channel digital output terminal 24 V DC, 0.5 A, singleconductor connection KL channel digital output terminal 24VDC, 2 A with polarity protection, 2-wire KL252 2-channel pulse width output terminal 24VDC,.5 A, 4-wire, switching to negative potential

15 KL KL KL275 KL276 2 KL2784 KL KL KM ZB KM channel relay output terminal 230 V AC, 2 A, make contacts, 4-wire. 5A (Ohmic Load) 2A (Inductive Load). 2-channel relay output terminal 230 V AC, 2 A, make contacts, 4-wire, no power con -channel universal dimmer terminal, 230 V AC, 300 VA (W), 50 Hz -channel universal dimmer terminal, 230 V AC, 600 VA (W), 50 Hz 4-channel digital output terminal 24 V AC/DC, 2 A, shortcircuit-proof 4-channel digital output terminal 24 V AC/DC, 2 A, potential-free, short-circuit-proof 6 Canales de Salidas Digitales. 24V -Wire. Positive Switching 6-channel digital output terminal module 24 V DC, 0.5 A, -wire connector with LEDs Relays with manual operation, 230 V AC, 6 A, coil 24 V, spare part KM264 2-channel relay module 230 V A C, 6 A, manual/automatic operation, switch and relay state BUS TERMINALS ANALOG INPUTS KL channel analog input terminal -0 V +0 V, differential input, 2 bit KL channel loop-powered input terminal 4 20 ma, with power supply for transducers via power contacts, 2 bit KL channel analog input terminal 4 20 ma, 2 bit KL channel analog input terminal 0 0 V, single-ended, 2 bit KL channel analog input terminal 0?0 V, single-ended, 2 bit KL channel input terminal PT00 (RTD) for resistance sensors, 6 bit, 3-wire KL334 4-channel thermocouple input terminal, preset to type K, with wire breakage detection, 6 bit KL channel resistor bridge input terminal (strain gauge), 6 bit. No power Contacts

16 KL3356 -channel accurate resistance bridge evaluation, with self-calibration, 6 bit KL phase power measurement terminal, max. 500 V AC 3~, max. A, via measuring transformers x A/A KL phase power measurement terminal, max. 500 V AC 3~, max. 5 A, via measuring transformers x A/5A KL channel analog input terminal 4-20 ma, 2 bit, 4 x 2-wire KL channel analog input terminal 4 20 ma, 2 bit, -wire KL canales de Entrada Análoga. 0 0V, 2 Bit BUS TERMINALS ANALOG OUTPUTS 2-channel analog output terminal 0?0 KL V, 2 bit KL Channel analog output terminal 0 0V, 2 bit KL channel analog output terminal 4 20 ma, 2 bit, 4 x 2- wire KL channel analog output terminal 4 20 ma, 2 bit, -wire BUS TERMINALS SPECIAL & COMMUNICATION KM655 2 Wireless data exchange terminal ZS rod antenna 5 dbi, direct connection, reverse SMA socket (antenna cannot be combined with a cable) ZS omni-directional antenna 4 dbi, matching cables: ZK /-0040 Coaxial cable, 50? impedance, with ZK attached connectors (SMA plug and 0020 reverse SMA socket), black 2 m KL658 0 EnOcean master terminal for KL6583

17 KL EnOcean transmitter and receiver, 35 MHz KL677 0 MP-Bus master terminal KL68 DSI/DALI master and power supply terminal BUS TERMINALS TERMINALS KL900 6 Módulo terminal para bus de campo tipo K. BECKHOFF KL900 Power supply terminal, 24VDC KL950 5 Power supply terminal, 230 V AC KL987 Potential distribution terminal, 8 x 0 V KL Power supply terminal with fuse, 25 V AC 230 V AC KL9260 Power supply terminal with fuse and diagnostics, 230 V AC KL Power supply unit terminal for the K-bus, 24 V DC, 2 A KL9505 Power supply unit terminal 24VDC, output 5 V DC, 0.5 A KL952 Power supply unit terminal 24VDC, output 2 V DC, 0.5 A MOTION AM3000 AM ZK ZK Servomotor, 48 V DC, resolver, Mo= 0.65 Nm, Io= 4.6 Arms, nn = 2000 min- motor cable, assembled at both ends for AM3xx to 2 EL720, l= 5 m, shielded resolver cable, assembled at both ends for AM3xx to 2 EL720,l = 5 m, shielded MOTION AM8000 AM83-F00 2 Servomotor, V DC, Mo=.3 Nm, Lo= 4 Arms, nn= 000 min-

18 MOTION AS060 AS Motor paso-paso 24?50VDC Mo=5.00Nm, Io=5.0Arms, flange x length=86 mm x 32 mm, 024 lines ZK ZK Cable encoder ensamblado en los finales para motor pasopaso AS000, 5x0.25 mmý, l=5m 2 m.b.c., br=5 Cable motor ensamblado en los finales AS000 Stepper Motors, 4 x 0.5 mmý, l=5 m MOTION AM8000 AT starter kit medium, 000 mm, straight length, 0 movers INFRASTRUCTURE COMPONENTS CU CU port Ethernet Switch, 0BASE-T/00BASE-TX Ethernet with 8 5-port Ethernet Switch, 0BASE-T/00BASE-TX Ethernet with 5 x RJ 45 TWINCAT

19 TS KS TwinCAT PLC Modbus RTU: Licence for using an IEC 63-3 software library for TwinCAT PLC for communication via serial Bus Terminals or PC COM ports: - protocol for Modbus RTU - client and server blocks included KS2000 software for Bus Coupler/Bus Terminal Controller, USB interface ACCESORIOS KS2000-Z2-USB 4 Connection cable for KS2000 or TwinCAT for serial conversion from USB for Bus Couplers or Bus Terminal Controllers of the BK, BC or LC series, lenght 3 m ZB300 9-pin D-sub connector up to 2 Mbaud with resistive terminator ZB30 9-pin D-sub connector up to 2 Mbaud with programming interface