CP-Link 4 The One Cable Display Link

Transcription

1 News

2 CP-Link 4 The One Cable Display Link At Hannover Messe Beckhoff presents a technology highlight: CP-Link 4 the new connection technology for remote panel operation over distances of up to 100 m from the Industrial PC With this one cable solution video signals, USB and power supply are transferred via a standard CAT 7 cable Cable and assembly costs are reduced CP-Link 4 The Two Cable Display Link The CP29xx-0010 multi-touch built-in panels and the CP39xx-0010 multi-touch panels for mounting arm installation can be operated up to 100 m away from the PC CP-Link 4 The Two Cable Display Link transfers DVI and USB together via a CAT 7 cable The CU8802 CP-Link 4 sender box is connected to the PC via DVI and USB, or else the C9900-E276 PCIe module for CP-Link 4 is installed in the PC CP-Link 4 The One Cable Display Link The power supply for the Control Panel can also be provided via CP-Link 4 The One Cable Display Link The CU8803 CP-Link 4 sender box is used instead of the CU8802 or the PCIe module The Control Panel remains unchanged The CU8803 sender box provides power to the Control Panel via the CAT 7 cable, which also transfers DVI and USB The power supply socket of the panel is not used wwwbeckhoffcom/cp-link4 The optimum combination for remote panel operation over distances of up to 100 m: Beckhoff multi-touch panel + CP-Link 4 CP-Link 4 The Two Cable Display Link: via C9900-E276 PCIe module integrated in the PC UPS OUT 24 V C9900-E V CAT 7, 100 m IPC with PCIe module slot CP29xx-0010 CP-Link 4 The Two Cable Display Link: via CU8802 transmitter box UPS OUT 24 V 24 V DVI/USB CAT 7, 100 m IPC CU8802 CP29xx-0010 CP-Link 4 The One Cable Display Link: DVI, USB and 24 V via CU8803 transmitter box UPS OUT 24 V 24 V DVI/USB CAT 7, 100 m 24 V 2 IPC CU8803 CP29xx-0010 Product announcement For availability status of the new products see Beckhoff website at: wwwbeckhoffcom

3 Multi-touch Panel PCs The product range of the multi-touch panels is continuously expanded At Hannover Messe Beckhoff presents two Panel PC series (CP22xx and CP26xx) with multi-fi nger touch screen Both panel series are for control cabinet installation with IP 65 protection at the front and IP 20 protection at the rear The display sizes are offered in landscape or portrait orientation News Industrial PC CP26xx Multi-touch built-in Panel PC with ARM Cortex -A8 The compact CP26xx Panel PC is equipped with an ARM Cortex -A8 processor Eight display sizes from 7 to 24 inches provide the right front panel for every application wwwbeckhoffcom/cp26xx CP22xx Multi-touch built-in Panel PC with Intel Core i The high-performance CP22xx Panel PC with Intel Core i processor is offered in seven display sizes from 12 to 24 inches In the basic confi guration the CP22xx has a 2½-inch hard disk and a CFast slot An optional second hard disk or CFast slot and the on-board SATA RAID 1 controller can form a RAID 1 system with two mirrored hard drives or CFast cards wwwbeckhoffcom/cp22xx Rear view of CP22xx for 12-inch, 15-inch and all portrait orientations Rear view of CP22xx for all landscape orientations from 156-inch 3 We reserve the right to make technical changes

4 CP66xx The Economy built-in Panel PC Beckhoff expands its product range of Panel PCs with a further variant with ARM Cortex -A8 processor The CP66xx-xxxx-0020 Panel PC is offered in fi ve display sizes from 57 to 19 inches The TFT display can be ordered with membrane keyboard, touch screen or touch pad wwwbeckhoffcom/cp66xx Control Panel with high performance: CP77xx Panel PC with Intel Celeron Control Panel with high computing power and low energy consumption: The robust CP77xx Panel PC series from Beckhoff integrates a TFT display and a PC in a slimline aluminium housing with IP 65 protection The new Panel PCs of the CP77xx-xxxx-0040 series are now also equipped with an Intel Celeron processor ULV, single-core, 800 MHz wwwbeckhoffcom/cp77xx News Industrial PC Fieldbus modules for the new CX2000 Embedded PCs The CX2000 Embedded PC series offers high fl exibility on the DIN rail with multi-core processors and modular PC and I/O interfaces As new items fi eldbus modules extend the CX2000 series The PROFIBUS and CANopen interfaces in master or slave variant are connected to the CPU module via PCI Express The parallel operation of several identical or different masters is possible In the case of mixed operation of master and slave connections, CX systems act as intelligent gateways between different fi eldbuses wwwbeckhoffcom/cx Product announcement For availability status of the new products see Beckhoff website at: wwwbeckhoffcom

5 TwinSAFE Controller integrates safety functions in a compact housing EtherCAT Coupler incl E-bus interface The new EK1960 TwinSAFE Controller integrates a complete safety controller including numerous I/O channels in a compact design It combines an EtherCAT Coupler, TwinSAFE PLC, digital inputs and outputs Primarily designed for applications with a small and medium scope of safety, the EK1960 can be used as an autonomous controller or as a decentralized controller The EK1960 integrates: TwinSAFE PLC 20 safe digital inputs (24 V DC) 8 safe digital outputs (24 V DC) 2 safe digital outputs (potential-free contact) for small to medium applications up to SIL 3 according to IEC and DIN EN ISO PLe wwwbeckhoffcom/ek1960 News TwinSAFE TwinSAFE EtherCAT Terminal with potential-free contacts The EL2964 digital output terminal has three simultaneously switching, normally open, potential-free contacts The two internal relays are activated over Safety over EtherCAT They are internally monitored If the TwinSAFE Terminal detects a fault, it switches to safe state (fail safe) The EL2964 conforms to the requirements of IEC SIL 3 and DIN EN ISO PLe wwwbeckhoffcom/el We reserve the right to make technical changes

6 Licence key for TwinCAT 31 TwinCAT 31 (see page 11) enables management of TwinCAT licences alternatively with the EL6070 licence key terminal or the C9900-L100 licence key USB stick The EL6070 is used as hardware licence key in the modular EtherCAT I/O system Both licence key variants offer secure private/public key encryption They can be used for secure data encryption via the PLC or C++ interfaces wwwbeckhoffcom/el6070 wwwbeckhoffcom/c9900-l100 News I/O 16-channel digital output with diagnostics Display terminal with navigation switch and operating hours counter The EL2819 EtherCAT Terminal and KL2819 Bus Terminal each have 16 digital output channels for the switching of 24 V DC loads up to 05 A The integrated diagnostics can be evaluated by the controller and indicated by the LEDs Overtemperature and the lack of a voltage supply to the terminal are supplied as diagnostic information Moreover, each of the channels can signal eg a short circuit wwwbeckhoffcom/el2819 wwwbeckhoffcom/kl2819 The EL6090 display terminal has an illuminated, low-refl ection LC display with two lines of 16 characters If the output text is longer than 16 characters, the terminal automatically switches to scrolling text mode The terminal can be used, for example, for displaying status messages or diagnostic information (eg piece counters, network addresses) A non-resettable operating hours counter is integrated and can be displayed and also read out via the controller wwwbeckhoffcom/el Product announcement For availability status of the new products see Beckhoff website at: wwwbeckhoffcom

7 Pressure measurement in the IP 67 system The EP EtherCAT Box, equipped with six digital inputs, two digital outputs and four pneumatic inputs, acquires these signals and transmits them electrically isolated to the controller The digital signals are connected via 4-pin M8 plug connectors The pneumatic signals are connected via the integrated 6-mm fi ttings Input 5 is used as measuring reference for the pressure measuring The pressure values are available as 16-bit values Measurement can be made up to 1 bar, with the value being output in relation to the measuring reference, eg for vacuum measurement in relation to the ambient pressure at suction grippers wwwbeckhoffcom/ep3774 Power distribution for EtherCAT Box modules with current measurement/data logging The EP enables connection of four EtherCAT Box power supply branches In each 24 V branch the current consumption for the control voltage US and the peripheral voltage UP is monitored, limited, and, if necessary, switched off The input voltage and current values of all outputs can be evaluated via the process data A continuous data log of the relevant data can be retrieved when an error occurs in order to localise the cause of the error Ethernet Switch in IP 67 The CU2608 Ethernet Switch offers eight D-coded M12 Ethernet ports It relays incoming Ethernet frames to the destination ports with 10/100 Mbaud In full duplex mode, it prevents collisions The IP 67 plastic housing in compact design enables easy on-site installation wwwbeckhoffcom/cu2608 wwwbeckhoffcom/ep We reserve the right to make technical changes

8 AM8100 Servomotors for OCT servo terminal The servomotors from the AM8100 series are suitable for operation on the EL servo terminal and can be equipped with the One Cable Technology (OCT) Homing is no longer necessary thanks to the integrated absolute encoder The encoder data are transferred fully digitally to the servo terminal via the motor cable, allowing the encoder cable to be dispensed with Options such as a backlash-free permanent magnet holding brake, a rotary shaft seal or a feather key groove are available on request The motors are equipped with a sturdy rotary resolver encoder and have been developed with a generously dimensioned bearing for general mechanical engineering wwwbeckhoffcom/am8100 News Motion AM8000/AM8500 Synchronous Servomotors with forced cooling The servomotor series offer high torques in the forced cooling version even at high speeds Cooling takes place with a 24 V DC fan, which is actuated independently of the motor Thanks to the external axial ventilation of the servomotors, the power density is thus increased further: the standstill torques can be increased by about 30 %; the rated torques at the rated speed even by up to 150 % The forced cooling option is available for the following sizes: AM8000 AM805x, AM806x, AM807x AM8500 AM855x, AM856x 8

9 AM8500 Servomotors with increased rotor moment of inertia The AM8500 series extends the servomotor range by a complete series with increased rotor moment of inertia The AM8500 series covers a wide performance range with four sizes and three lengths with standstill torques from 138 to 29 Nm Due to the high rotor inertia the control of the AM8500 is simplifi ed in areas where a high external inertia has to be moved, because the servomotors tend less to vibrate and can be adjusted much more easily on the servo controller to the respective application Typical areas of application for the AM8500 servomotors are in woodworking machines, printing machines and machine tools as well as in fi lm winders and feeding drive units wwwbeckhoffcom/am8500 Complete drive axis: Planetary gears supplement stainless steel motor series The new stainless steel planetary gears from the AG2800 series supplement the AM8800 servomotors to form a complete drive axis in Hygienic Design Features: corrosion-resistant implementation resistant to aggressive cleaning agents stainless steel screw plug food-compatible NSF-H1 lubrication high protection class IP 67 laser-etched identifi cation plate dead-space-free design and smooth, electro-polished surfaces wwwbeckhoffcom/ag We reserve the right to make technical changes

10 XTS: Software replaces complex mechanisms The XTS drive system (extended Transport System) from Beckhoff offers completely new freedom for mechanical engineering XTS is a mechatronic system containing all functions necessary for operation A modular, fully integrated linear motor with power electronics and displacement measurement in one device A mover as the moved part A mechanical guide rail The most diverse applications can be realised with these few coordinated components The desired geometries, lengths and radii are formed by the number and choice of the components One or more wireless movers can be moved highly dynamically at up to 4 m/s on an almost arbitrary and fl exible path XTS offers increased fl exibility for machine construction XTS can be used as standard hardware; new or additional functions for example, in the case of a change of product are implemented on a software basis wwwbeckhoffcom/xts News Motion 10 The XTS components: 2 curve sections 2 or more straight sections NEW: straight section with lock for removal of the movers 1 or more movers NEW: encoder fl ag with electronic marking for identifi cation of a specifi c mover Beckhoff IPC TwinCAT NC PTP TwinCAT XTS extension power supply unit

11 TwinCAT 31: new features for extended Automation TwinCAT 31 provides the world of automation with new and extended functions New features support for the new Visual Studio 2012 support for Windows 8 improved support of source code control tools automatic code generation with the extended TwinCAT Automation Interface support for different platforms runtimes for 64-bit operating systems and for CE platforms with x86 processors CPU isolation for multi-core processors: allocation of one or more cores exclusively for TwinCAT runtime licence key TwinCAT licencing optionally with EL6070 licence key terminal or C9900-L100 licence key USB stick, see page 6 secure private/public key encryption interface to PLC, C++ wwwbeckhoffcom/twincat3 News Automation TwinCAT 3 Scope The basic version of TwinCAT 3 Scope has been delivered as standard with the Engineering Setup ever since the release of TwinCAT 3 TwinCAT 3 Scope View Professional is based on this basic version TwinCAT Scope Professional can be integrated in the user s own NETbased visualisation Like TwinCAT itself, the TwinCAT 3 Scope is integrated into Microsoft VisualStudio Variables can be transfered to the scope confi guration from the System Manager or directly from the PLC wwwbeckhoffcom/twincat3 TC3 Interface for Matlab /Simulink The interface for Matlab /Simulink provides a communication interface between Matlab /Simulink and the TwinCAT 3 runtime It supports the acquisition and visualisation of real-time parameters and signal values It can be used both for the simulation of hardware ( software in the loop ) and for the simulation of the controller ( hardware in the loop ) wwwbeckhoffcom/te We reserve the right to make technical changes

12 Headquarters Beckhoff Automation GmbH Eiserstraße Verl Germany Phone: + 49 (0) / info@beckhoffcom wwwbeckhoffcom DK This fl yer gives a short overview of the new products; for further information see the Beckhoff News catalog 05'2013 or wwwbeckhoffcom/news Products online At wwwbeckhoffcom you can get detailed information on the range of products from Beckhoff Animations, videos and interactive online presentations supplement the large variety of information wwwbeckhoffcom Print media online The Beckhoff catalogs and fl yers are available for download on the Internet Printed copies are available on request Please use our online order form to specify your requirements wwwbeckhoffcom/media Main catalog PC Control magazine Beckhoff, TwinCAT, EtherCAT, Safety over EtherCAT, TwinSAFE, XFC and XTS are registered trademarks of and licensed by Beckhoff Automation GmbH Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners Beckhoff Automation GmbH 04/2013 The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract