F USB Charger ID With Quick Charge 2.0 F _www.universe-micro.com. Release Date: June, 2014 Version: V0.10P
|
|
- Raymond Caldwell
- 5 years ago
- Views:
Transcription
1 USB Charger ID With Quick Charge 2.0 Release Date: June, 2014 Version: June, 2014
2 Datasheet Revision History Version Date Page Revision History 2014/06 - Preliminary Please note that all data and specifications are subject to change without notice. All the trade marks of products and companies mentioned in this data sheet belong to their respective owners. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Fintek for any damages resulting from such improper use or sales. June, 2014
3 Table of Content 1. General Description Feature List Applications Pin Configuration Pin Description Ordering Information Top Marking Specification Package Dimensions... 6 June, 2014
4 1. General Description The is low-cost USB Dedicated Charger Identification Circuit IC which is so smart to recognize most of the mainstream handheld devices. It allows devices to draw current as much as using as the original adapter. The can support most of the USB Battery Charging Specification world-wide including BC 1.2, Apple charging spec (for i-pad & i-phones) and specs for Samsung Galaxy Tab. Apple Inc. has upgraded its charger output capacity for tablets to 12W output (maximum 5V). By setting the USB data pins (D+/D-) to the required voltage levels, the charging devices will recognize their required voltage levels, and starts to draw the suitable current to charge. The also supports USB high-voltage dedicated charging port (HVDCP) interface IC for the Qualcomm Quick Charge 2.0 (QC 2.0) specification. The supports the full output voltage range of either Class A or Class B. Optionally 12V & 20V can be inhibited for protecting the battery charger from the accidental damage. The automatically detects whether a connected Powered Device (PD) is Quick Charge 2.0 capable before enabling output voltage adjustment. If a PD which is not compliant to Quick Charge 2.0 is detected the disable output voltage adjustment to ensure the safe operation with legacy 5 V only USB PDs. The has a selection pin to select Apple 2.1A or 2.4A mode and also built in with EN pin for disabling Fintek old USB Charger IC F75198 function. F75198 supports all of the functions same as except QC 2.0 function. The is suitable for all charger products with USB interface. It provides enhanced ESD protection up to ±8kV on the DP and DM with the MSOP10 package. It requires minimum external circuits, which can reduce develop & production cost dramatically. 1
5 2. Feature List Fully Supports Quick Charge 2.0 Specification Class A: 5 V, 9 V, and 12 V Output Voltage Class B: 5 V, 9 V, 12 V, and 20 V Output Voltage Support YD/T Charging Spec. Support 2.4A or 2.1A Apple Devices Fast Charging Support EN Pin for Disabling Fintek Old USB Charger IC F75198 Function USB Battery Charging Specification Revision 1.2 (BC 1.2) Compatible Automatic USB DCP shorting D+ to D- line Default 5 V mode operation Very low power consumption ±8kV High ESD Protection On DP/DM. Support Samsung Galaxy tab Devices Charging. MSOP8 Package Guarantee Operation Temperatures range from -40 C to 70 C* *Design Guarantee: The device is guaranteed to meet the specifications from 0 C to 70 C. Specifications over the 40 C to 85 C operating temperature range are assured by design, characterization and correlation with the statistical process controls. 3. Applications Car Charger Wall-Adapter / Power Plugs, Outlets USB Power Plugs (extensions) 2
6 4. Pin Configuration 5. Pin Description OD IN AIO P - Open-drain output pin - Input pin - Analog Input/Output pin - Power Pin No. Pin Name Type Description 1 EN IN 2 SEL IN 3 ID1 OD 1: F75198 With QC 2.0 Function 0: Only QC 2.0 1: Apple Mode 2.1A 0: Apple Mode 2.4A Voltage Adjustment Switch. Active for 9V, 12V, 20V output setting. See below output voltage lookup table for detail. 4 ID2 OD Voltage Adjustment Switch. Active for 12V, 20V output setting. below output voltage lookup table for detail. See 5 ID3 OD Voltage Adjustment Switch. Active for 20V output setting. See below output voltage lookup table for detail. 6 GND P Ground. 7 DM AIO USB negative data-channel to external USB device. 3
7 8 DP AIO USB positive data-channel to external USB device. 9 CAP AO Internal Power 5V, connect this pin with 0.1uF capacitor directly to GND. 10 VCC P Power Supply, 5V, 9V, 12V, 20V Output Voltage Lookup Table Internal Switch Setting D+ D- Output ID1 ID2 ID3 3.3V 3.3V 20V V 0.6V 12V V 0.6V 9V V GND 5V (default) P.S: 1 stands for the internal MOS is OFF; 0 stands for MOS ON. 4
8 6. Ordering Information Part Number Package Type Production Flow M MSOP10-40 C to +85 C* *Design Guarantee: The device is guaranteed to meet the specifications from 0 C to 70 C. Specifications over the 40 C to 85 C operating temperature range are assured by design, characterization and correlation with the statistical process controls. 7. Top Marking Specification The version identification is shown as the bold red characters. Please refer to below for detail: MSOP MX XXXXX 1 st Line: Device Name 299M where M is MSOP 10 package + IC Version (X) where where A means version A, B means version B, package. 2 nd Line: Trace Code (XXXXX) : Pin 1 Identifier 5
9 8. Package Dimensions MSOP 10 6
10 Feature Integration Technology Inc. Headquarters Taipei Office 3F-7, No 36, Tai Yuan St., Bldg. K4, 7F, No.700, Chung Cheng Rd., Chupei City, Hsinchu, Taiwan 302, R.O.C. Chungho City, Taipei, Taiwan 235, R.O.C. TEL : TEL : FAX : FAX : www: Please note that all datasheet and specifications are subject to change without notice. All the trade marks of products and companies mentioned in this datasheet belong to their respective owner 7
F USB Charger Controller F Release Date: Dec., 2011 Version: V0.11P. Nov., 2011 Data Sheet
USB Charger Controller Release Date: Dec., 2011 Version: V0.11P F75204 Datasheet Revision History Version Date Page Revision History Data Brief 2011/10 - Data Brief 0.10P 2011/ 11 Up Date AC/DC SPECs 0.11P
More informationName Operation Temperature Package Package Mark
USB Charging Controller Features D+/D- DCP Mode per USB Battery Charging Specification 1.2 D+/D- Short Mode per Telecommunication Industry Standard YD/T1591-2009 (Chinese) Supports non-bc1.2 Charging Modes
More informationUSB Charging Controller. Features. General Description. Applications. Order Information
USB Charging Controller Features D+/D DCP Mode per USB Battery Charging Specification 1.2 D+/D Short Mode per Telecommunication Industry Standard YD/T1591 2009 (Chinese) Supports non BC1.2 Charging Modes
More informationZS5889. USB Charging Controller
Features D+/D- DCP Mode per USB Battery Charging Specification 1.2 D+/D- Short Mode per Telecommunication Industry Standard YD/T1591-2009 (Chinese) Supports non-bc1.2 Charging Modes by Automatic Selection
More informationUSB Charging Controller
USB Charging Controller Features D+/D DCP Mode per USB Battery Charging Specification 1.2 D+/D Short Mode per Telecommunication Industry Standard YD/T1591 2009 (Chinese) Supports non BC1.2 Charging Modes
More informationCW3003CW3004R04. Dual-Channel USB Charging Controller. Features. General Description. Applications. Order Information
CW3003 CW3004 Dual-Channel USB Charging Controller Features D+/D- DCP Mode per USB Battery Charging Specification 1.2 D+/D- Short Mode per Telecommunication Industry Standard YD/T1591-2009 (Chinese) Supports
More informationUNISONIC TECHNOLOGIES CO., LTD UCHQ200 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD USB DEDICATED CHARGING PORT CONTROLLER WITH QC 2.0 FAST CHARGING FUNCTION DESCRIPTION The UTC UCHQ200 is a fast charge protocol controller and follows Quick Charge 2.0 specification
More informationFP6600. USB Dedicated Charging Port Controller with QC 2.0 Fast Charging Function. Features. Description. Applications.
USB Dedicated Charging Port Controller with QC 2.0 Fast Charging Function Description The is a fast charge protocol controller and follows Quick Charge 2.0 specification for smart power bank application.
More informationTest Report F USB Charger Controller Compatibility Test Report. Release Date: Sept, 2012 Version: V0.19P. Sept, 2012 Test Report
F75198 USB Charger Controller Compatibility Release Date: Version: V0.19P F75198 Revision History Version Date Page Revision History V0.10P 2011/11 - Preliminary version V0.11P 2011/11 Add New Result V0.12P
More informationProduct Data Sheet MA5885 (USB Fast Charging Emulator)
Table of Contents 1. Description... 2 2. Feature... 2 3. Target Application... 3 4. MA5885 Charging Modes... 3 5. Detail Function Description... 4 6. Pin Assignment... 6 7. Pin Description... 6 8. Electrical
More informationGeneral Description. Applications. Typical Operating Circuit
General Description The MAX14631/MAX14633 are USB charger adapter emulators with automatic host-charger identification circuitry for USB-dedicated chargers. The devices allow USB wall adapters, travel
More information奥科迪科技 ( 授权代理 ) 蔡小姐 QQ: 电话 :
USB Dedicated Charging Port Controller for Fast Charging Protocol and QC 2.0/3.0 Description The is a fast charge protocol controller for HiSilicon Fast Charging Protocol (FCP) and Qualcomm Quick Charge
More informationVP222 USB Type-C DFP CC Controller with Universal Battery Charging
Product Preliminary VP222 USB Type-C DFP CC Controller with Universal Battery Charging Mar. 07, 2015 VIA Labs, Inc. www.via-labs.com 7F, 529-1, Zhongzheng Rd., Xindian District, New Taipei City 231 Taiwan
More informationUC2633/UC2634. APPLICATIONS Power Bank/Car Charger USB Wall Adapter Travel Charger PACKAGE AND APPLICATION
DESCRIPTION The UC2633/UC2634 is single/dual USB adapter emulators with automatic host charger identification circuitry for USB dedicated chargers. The devices integrated automatic USB charger identification
More informationFP6601QS6. USB Dedicated Charging Port Controller for Fast Charging Protocol and QC 2.0/3.0. Description. Features. Applications. Ordering Information
USB Dedicated Charging Port Controller for Fast Charging Protocol and QC 2.0/3.0 Description The FP6601Q is a fast charge protocol controller for HiSilicon Fast Charging Protocol (FCP) and Qualcomm Quick
More informationK T6001. Smart USB Charging Port Controller. General Description. Applications. Features. Ordering Information
K CA Car Chargers Computer Peripherals Wall Adaptors USB Power Plugs Portable Power Banks General Description The K T6001 is a smart USB interface IC specifically designed for dedicated charging port applications.
More informationUNISONIC TECHNOLOGIES CO., LTD UCHQ613 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD UCHQ613 Preliminary CMOS IC USB DEDICATED CHARGING PORT CONTROLLER DESCRIPTION The UTC UCHQ613 are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors
More informationUSB dedicated charging port (DCP) controller BL2513M
USB dedicated charging port (DCP) controller BL2513M DESCRIPTION The BL2513M is USB dedicated charging port (DCP) controllers. Applications include vehicle power charger, wall adapters with USB DCP and
More informationUSB dedicated charging port (DCP) controller BL2514M
USB dedicated charging port (DCP) controller BL2514M DESCRIPTION The BL2514M is USB dedicated charging port (DCP) controllers. Applications include vehicle power charger, wall adapters with USB DCP and
More informationWT6632F (Standard Code Version) USB Power Delivery Controller
WT6632F (Standard Code Version) Data Sheet Rev. 1.0 September 2016 Copyright Notice This data sheet is copyrighted by Weltrend Semiconductor, Inc. Do not reproduce, transform to any other format, or send/transmit
More informationCEP8120 Rev 1.0, March, 2015
USB Dedicated Charging Port Controller FEATURES Supports USB DCP Shorting D+ Line to D Line per USB Battery Charging Specification, Revision 1.2 (BC1.2) Supports Shorted Mode (Shorting D+ Line to D- Line)
More informationPI5USB1468 PI5USB1468A
Features ÎÎManages communication to allow charging to occur ÎÎProvides multiple modes of charging to ensure all of the following specs can be met: DCP, CDP, and SDP per BC.0,.,. spec DCP per YD/T-59 spec
More informationVP300 USB PD Type-C Controller for SMPS
Datasheet VP300 USB PD Type-C Controller for SMPS Aug. 30, 2016 Revision 0.6 Tel: 0755--32997776-18002593172 Fax: 0755--32997775 - Q 2966864704 Revision History Revision No. Draft Date History Initial
More informationIP4220CZ6 Dual USB 2.0 Integrated ESD protection to IEC level 4
INTEGRATED DISCRETES Integrated ESD protection to IEC 61000-4-2 level 4 2004 September 17 Philips Semiconductors FEATURES ESD IEC 61000-4-2 level 4, ± 8kV contact discharge compliant protection Four ultra-low
More informationW83176R-401 W83176G-401
W83176R-401 W83176G-401 Winbond Current Mode Differential Buffer for PCI Express and SATA Date: May,2006 Revision: 0.6 W83176R-401/W83176G-401 Datasheet Revision History PAGES DATES VERSION WEB VERSION
More informationRT9505. Linear Single Cell Li-Ion Battery Charger IC. General Description. Features. Applications. Ordering Information. Pin Configurations
Linear Single Cell Li-Ion Battery Charger IC General Description The RT505 is a fully integrated low cost single-cell Li- Ion battery charger IC ideal for portable applications. The RT505 is capable of
More informationUSB Dedicated Charging Port Controller
USB Dedicated Charging Port Controller DESCRIPTION AF9522 are dual channel USB dedicated charging port controller, it can auto-detect feature monitors USB data line voltage, and automatically provides
More informationW83176R-400 W83176G-400
W83176R-400 W83176G-400 Winbond Current Mode Differential Buffer for PCI Express and SATA Date: May/16/2006 Revision: 0.6 Datasheet Revision History PAGES DATES VERSION WEB VERSION MAIN CONTENTS 1 n.a.
More informationiw656 USB Power Delivery Controller for AC/DC Power Adapters 1 Description 2 Features 3 Applications
1 Description The iw656 is a USB Power Delivery (USB PD) interface controller which handles the communication between a Power Adapter and Mobile Device (MD). The controller enables the mobile device to
More informationPI5USB66. USB Charge Controller IC for Single USB Port. Features. Description. Pin Configuration. Applications
Features ÎÎManages communication to allow charging to occur ÎÎProvides multiple modes of charging to ensure all of the following specs can be met: DCP mode per USB BC.0,., &. spec YD/T - 59 charger spec
More informationFeatures. V CC 2.7V to 5.5V 10k OVERCURRENT GND NC
MIC225/275 MIC225/275 Single-Channel Power Distribution Switch MM8 General Description The MIC225 and MIC275 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit
More informationProgrammable USB Port Power Controller with Charger Emulation
UCS1002 Programmable USB Port Power Controller with Charger Emulation PRODUCT FEATURES Data Brief General Description The UCS1002 provides a USB port power switch for precise control of up to 2.5 amperes
More informationMIC2544A/2548A. General Description. Features. Applications. Typical Application. Programmable Current Limit High-Side Switch
Programmable Current Limit High-Side Switch General Description The MIC2544A and MIC2548A are integrated, high-side power switches optimized for low loss DC power switching and other power management applications,
More informationLD8108A 08/02/2016. AC/DC Speedy Charge Controller for. Qualcomm Quick Charge 2.0 USB Interface. Features. General Description.
REV. 00 General Description AC/DC Speedy Charge Controller for Qualcomm Quick Charge 2.0 USB Interface The is an AC/DC Speedy Charge controller for Qualcomm Quick Charge 2.0 (QC2.0) USB interface receiver
More informationWinbond ACPI-STR Controller W83305S W83305G
Winbond ACPI-STR Controller W83305S W83305G W83305S Data Sheet Revision History PAGES DATES VERSION VERSION ON WEB MAIN CONTENTS 1 Apr./06 0.5 N.A. All version before 0.5 are for internal use only Please
More informationILI2511. ILI2511 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.4. Date: 2018/7/5
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.4 Date: 2018/7/5 ILI TECHNOLOGY CORP. 8F., No.1, Taiyuan 2 nd St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) Tel.886-3-5600099;
More informationProgrammable Dual LDO Output Voltage and WLED Current with I 2 C Interface. Figure 1. Dual LDO Camera Supply Input Applicaiton Circuit
Programmable Dual LDO Output Voltage and W Current with I 2 C Interface 1. Introduction Bear Huang, August 2007 The RT9367A is an integrated solution for panel backlighting and phone camera application.
More informationMIC2027/2077. Features. General Description. Applications. Typical Application. Quad USB Power Distribution Switch
Quad USB Power Distribution Switch General Description The MIC2027 and MIC2077 are quad high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection. The MIC2027/77
More informationIP2716. Feature. Applications. Description. USB TYPE-C PD3.0 QC3.0/2.0/MTK High Voltage Charger Protocol Controller
USB TYPE-C PD3.0 QC3.0/2.0/MTK High Voltage Charger Protocol Controller Feature USB TYPE-C Integrate TYPE-C DRP protocol Auto detect TYPE-C device plug in or plug out Auto detect the capability of the
More informationHigh-side Power Distribution Switch NCT3521U
High-side Power Distribution Switch NCT3521U -Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATIONS...2 4. PIN CONFIGURATION AND DESCRIPTION...2 5. TYPICAL APPLICATION CIRCUIT...3
More informationAIC1520. Ferrite Bead GND. *33µF, 16V Tantalum, or 100µF, 10V Electrolytic Bold line indicate high-current traces. USB High-Side Power Switch
USB High-Side Power Switch FEATURES 120mΩ (5V Input) High-Side MOSFET Switch. 500mA Continuous Load Current. 80µA Typical On-State Supply Current. Current-Limit / Short Circuit Protection. Thermal Limiting
More informationFeatures. Applications
3.3V Ultra-Precision 1:4 LVDS Fanout Buffer/Translator with Internal Termination General Description The is a 3.3V, high-speed 2GHz differential low voltage differential swing (LVDS) 1:4 fanout buffer
More informationWinbond ExpressCard Power Interface Switch W83L351 Series
Winbond ExpressCard Power Interface Switch W83L351 Series W83L351 Series Data Sheet Revision History NO PAGES DATES VERSION VERSION ON WEB 1. All Apr. /07 1.0 N.A 2 28 July 5, 2007 1.1 MAIN CONTENTS All
More informationPI5USB268. USB Host Charge Controller IC for Dual USB Ports. Features. Description. Pin Configuration, 20QE (Top View) Applications
s Features ÎÎManages communication to allow charging to occur from 2 USB ports ÎÎProvides multiple modes of charging to ensure all of the following specs can be met: BC.0,., &.2 spec YD/T - 59 Chinese
More informationData Sheet VL800 4-Port USB 3.0 Host Controller. April 25, 2010 Revision VIA Labs, Inc.
Data Sheet VL800 4-Port USB 3.0 Host Controller April 25, 2010 Revision 0.81 VIA Labs, Inc. www.via-labs.com 7F, 529-1, Chung-Cheng Road, Hsin-Tien, Taipei, Taiwan Tel: (886-2) 2218-1838 Fax: (886-2) 2218-8924
More informationPI5USB1458/PI5USB1458A. Features. Description. Block Diagram. A product Line of Diodes Incorporated
USB Host Charger Controller supporting BC., YD/T-59, & Non-standard Protocols Features ÎÎManages communication to allow charging to occur ÎÎProvides multiple modes of charging to ensure all of the following
More informationASIX USB-to-LAN Applications Layout Guide
ASIX USB-to-LAN Applications Revision 1.0 Dec. 11th, 2007 1 Revision Date Description 1.0 2007/12/11 New release. ASIX USB-to-LAN Applications Revision History 2 Content 1. Introduction...4 2. 4-Layer
More informationILI2312. ILI2312 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.03.
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2015/11/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099;
More informationMIC2782. General Description. Features. Applications. Typical Application. Dual-Input Push Button Reset IC with Immediate and Delayed Outputs
Dual-Input Push Button Reset IC with Immediate and Delayed Outputs General Description The is a two input, two output push button reset IC. It will generate a reset pulse for a factory programmed reset
More informationTTL-232R-PCB. TTL to USB Serial Converter PCB. Datasheet
Future Technology Devices International Ltd TTL-232R-PCB TTL to USB Serial Converter PCB Datasheet Document Reference No.: FT_000065 Version 1.0 Issue Date: 2008-08-28 Future Technology Devices International
More informationHoltek e-link for 8-bit MCU OCDS User s Guide
Revision: V1.00 Date: August 24, 2012 Contents HT8OCDS-ICE Introduction... 3 HT8OCDS-ICE Composition... 3 e-link(for HT8OCDS)... 3 Target Board (with EV)... 4 HT8OCDS-ICE Usage Flow Description... 4 IDE3000
More informationFeatures VCC MIC1810 RESET RESET
Microprocessor Reset Circuit General Description The is an inexpensive microprocessor supervisory circuit that monitors power supplies in microprocessor based systems. The function of these devices is
More informationABRIDGED DATA SHEET. Automotive High-Current Step-Down Converter with USB Protection/Host Charger Adapter Emulator. Benefits and Features
EVALUATION KIT AVAILABLE General Description The combines a 5V automotive-grade stepdown converter capable of driving up to 2.5A, a USB host charger adapter emulator, and USB protection switches for automotive
More informationFeatures. Applications. MIC4126/27/28 Block Diagram
Dual 1.5A-Peak Low-Side MOSFET Drivers in Advanced Packaging General Description The MIC4126, MIC4127, and MIC4128 family are highlyreliable dual 1.5A low-side MOSFET drivers fabricated on Micrel s BiCMOS/DMOS
More informationMIC2560. General Description. Features. Applications. Typical Application. PCMCIA Card Socket V CC and V PP Switching Matrix
PCMCIA Card Socket V CC and V PP Switching Matrix General Description The V CC and V PP Matrix controls PCMCIA (Personal Computer Memory Card International Association) memory card power supply pins, both
More informationBridgetek Pte Ltd. CleOIO-Shield Module Datasheet. 1 Introduction. 1.1 Features. CleOIO-Shield Module Datasheet Version 1.0
Bridgetek Pte Ltd CleOIO-Shield Module Datasheet 1 Introduction The CleOIO-Shield is an input/output expansion shield for CleO series and belongs to CleO accessories. It is compatible with CleO35, CleO50,
More informationFeatures. LOAD SWITCH or PMIC. LOAD SWITCH or PMIC /RESET
Dual-Input Push Button Reset IC with Immediate and Delayed Outputs General Description The is a two input, two output push-button reset IC. It will generate a reset pulse for a factory-programmed reset
More informationAIC A Dual USB High-Side Power Switch FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT
1.0A Dual USB High-Side Power Switch FEATURES 2.7V to 6.5V Input Voltage Range 1.0A Dual Continuous Load Current 100mΩ High-Side P-MOSFET Switch 20Ω Open-Drain Over-Current Flag Output 80uA Quiescent Supply
More informationMIC2790/1/3. General Description. Features. Applications. Typical Application
Supervisor with High-Accuracy, Ultra-Fast Propagation Delay, and Capacitor-Programmable Reset Delay General Description The is ideal for monitoring highly-accurate core voltages that require rapid response
More informationMIC826. General Description. Features. Applications. Typical Application
Voltage Supervisor with Watchdog Timer, Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDFN General Description The is a low-current, ultra-small, voltage supervisor with manual reset input, watchdog
More informationFuture Technology Devices International
Future Technology Devices International Datasheet UMFT51AA 8051 Compatible Module UMFT51AA is an FT51A DIP module that is compatible with an 8051 microcontroller. 1 Introduction 1.1 Features The UMFT51AA
More informationFeatures MIC2779L IN OUT HTH GND. Cellular Telephone Battery Monitor
MIC2779 Voltage Monitor with Adjustable Hysteresis General Description The MIC2779 is a voltage monitor uniquely designed to detect two separate voltage thresholds combined with a delay generator and logic.
More informationFuture Technology Devices International Ltd
Future Technology Devices International Ltd FTPD-1 FTDI Programmer Debugger 1 Module Datasheet FTPD-1 is a module used for programming and debugging. 1. Introduction 1.1 Features The FTPD-1 is a module
More informationMIC5281. Features. General Description. Applications. Typical Application. 120V IN, 25mA, Ultra-Low IQ, High-PSRR Linear Regulator
120V IN, 25mA, Ultra-Low IQ, High-PSRR Linear Regulator General Description The high-performance linear regulator offers a very-wide input operating voltage range, up to 120V DC, and supplies an output
More informationFeatures. Applications
HCSL-Compatible Clock Generator for PCI Express General Description The is the smallest, high performance, lowest power, 2 differential output clock IC available for HCSL timing applications. offers -130dBc
More informationPAN3504 USB OPTICAL MOUSE SINGLE CHIP
General Description USB OPTICAL MOUSE SINGLE CHIP The is a CMOS process optical mouse sensor single chip with USB interface that serves as a nonmechanical motion estimation engine for implementing a computer
More informationUSB/Charger and Over-Voltage Detection Device
FAN3988 USB/Charger and Over-Voltage ion Device Features Charger/USB ion Device Charger/USB Device ion Flag Over-/Under-Voltage ion Flag V BUS Supply: 2.7 V to 20 V C ON of 1.5 pf 6-Lead MicroPak MLP Package
More informationTechnical Data Sheet Photolink- Fiber Optic Receiver
Technical Data Sheet Photolink- Fiber Optic Receiver Features 1. High PD sensitivity optimized for red light 2. Data : NRZ signal 3. Low power consumption for extended battery life 4. Built-in threshold
More informationUSB3740. High Speed Switch for Mobile and Portable Applications USB3740 PRODUCT FEATURES DATASHEET. USB3740 Block Diagram
USB3740 High Speed Switch for Mobile and Portable Applications PRODUCT FEATURES High Speed USB Mux for multiplexing the USB lanes between different functions Switch the USB connector between two different
More informationUniversal USB-C Laptop Charger
Universal USB-C Laptop Charger User Manual Product Features: 1. Adopt USB PD2.0 agreements and Qualcomm Quick Charge 3.0 technology, offers fast and efficient charging technology. 2. Featuring a USB-C
More informationFuture Technology Devices International
Future Technology Devices International UMFTPD3A Datasheet Universal programming Module UMFTPD3A is a universal programming module for OTP memory and efuse programming. 1 Introduction The UMFTPD3A Universal
More informationMIC2790/1/3. General Description. Features. Applications. Typical Application
Supervisor with High-Accuracy, Ultra-Fast Propagation Delay, and Capacitor-Programmable Reset Delay General Description The is ideal for monitoring highly-accurate core voltages that require rapid response
More informationPRTR5V0U2X. 1. Product profile. Ultra low capacitance double rail-to-rail ESD protection diode in SOT143B. 1.1 General description. 1.
in SOT143B Rev. 01 22 September 2005 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection diode in a small SOT143B
More informationFeatures. Applications
Push-Button Reset IC General Description The are low-current, ultra-small, pushbutton reset supervisors with long set-up delays. The devices feature two manual reset inputs and two reset outputs. The devices
More informationRT mA 5-Channel Charge Pump White LED Driver with Low Dropout Current Source. Features. General Description. Applications. Pin Configurations
General Description The RT9365 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing an x1/x1.5
More informationMC FPGA Bridge IC. for. MIPI D-PHY Systems and SLVS to LVDS Conversion DATASHEET. Version August Meticom GmbH
FPGA Bridge IC for MIPI D-PHY Systems and SLVS to LVDS Conversion DATASHEET Version 1.09 August 2016 Meticom GmbH Meticom GmbH Page 1 of 14 Revision History Version Date of Issue Change 1.01 April 25,
More informationFuture Technology Devices International Ltd
Future Technology Devices International Ltd FTPD-1 FTDI Programmer Debugger 1 Module Datasheet FTPD-1 is a module used for programming and debugging. 1. Introduction 1.1 Features The FTPD-1 is a module
More informationILI2303. ILI2303 Capacitive Touch Sensor Controller. Specification
Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2014/9/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099; Fax.886-3-5600055
More information80W USB-C LAPTOP & QC 3.0 CHARGER
Instructions Manual 80W USB-C LAPTOP & QC 3.0 CHARGER EV-CHR-80B EV-CHR-8UK T M Product Features: 1. Supply power for laptops, smart phones and tablet PCs. 2. Adopt Qualcomm Quick Charge 3.0 technology,
More informationSM Features. General Description. Typical Application MHz/312.5MHz and MHz/156.25MHz LVDS Clock Synthesizer.
156.25MHz/312.5MHz and 78.125MHz/156.25MHz LVDS Clock Synthesizer ClockWorks Flex General Description The is a member of the ClockWorks family of devices from Micrel and provides an extremely low-noise
More informationUSB Port MTT Hub
USB 2.0 4-Port MTT Hub General Description The is a USB 2.0 4-port hub using multiple transaction translators (MTT) for highest possible bandwidth capability. The upstream USB interface has an integrated
More informationMIC2546/2547. Features. General Description. Applications. Typical Application. Dual Programable Current Limit Switch
Dual Programable Current Limit Switch General Description The MIC2546 and MIC2547 are integrated high-side dual power switches optimized for low loss dc power switching and other power management applications,
More informationGENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL APPLICATION DIAGRAM
August 2009 Rev. 2.0.0 GENERAL DESCRIPTION The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two
More informationZSPM4121. Under-Voltage Load Switch for Smart Battery Management. Datasheet. Brief Description. Features. Related IDT Smart Power Products
Under-Voltage Load Switch for Smart Battery Management ZSPM4121 Datasheet Brief Description The ZSPM4121 battery management load switch can be used to protect a battery from excessive discharge. It actively
More informationLow Voltage, 10-Bit Digital Temperature Sensor in 8-Lead MSOP AD7314
a FEATURES 10-Bit Temperature-to-Digital Converter 35 C to +85 C Operating Temperature Range 2 C Accuracy SPI and DSP Compatible Serial Interface Shutdown Mode Space-Saving MSOP Package APPLICATIONS Hard
More informationFeatures. Applications
Micro-Power Voltage Supervisor IttyBitty General Description The is a power supply supervisor that provides undervoltage monitoring, manual reset capability, and power-on reset generation in a compact
More informationPI5USB2549 USB Charging Port Controller and Load Detection Power Switch
Features Supports DCP Modes per USB Battery Charging Specification 1.2 Supports Shorted Mode per Chinese Telecommunication Industry Standard YD/T1591-2009 Supports non-bc1.2 Charging Modes by Automatic
More informationMF RD700. PEGODA Contactless Smart Card Reader READER COMPONENTS. Preliminary Product Specification Revision 2.0 PUBLIC. July2002
READER COMPONENTS PEGODA Contactless Smart Card Reader Preliminary Product Specification Revision 2.0 PUBLIC July2002 Philips Semiconductors Philips Semiconductors Preliminary Specification Rev. 2.0 July
More informationFuture Technology Devices International
Future Technology Devices International Datasheet UMFT234XD Breakout Modules 1 Introduction UMFT234XD is a USB to UART breakout module The UMFT234XD breakout module utilizes FTDI s FT234XD IC to convert
More informationMAP9010. High Voltage AC LED Driver. High Voltage AC LED Driver. General Description. Features. Applications. Ordering Information
General Description The MAP91 is LED Driver which has high input voltage ranged from 9V to 27V. It can drive several series LEDs from rectified AC voltage. The MAP91 can achieve.95 higher power factor
More informationUSB334x. Enhanced Single Supply Hi-Speed USB ULPI Transceiver PRODUCT FEATURES PRODUCT PREVIEW. Applications. Data Brief
334x Enhanced Single Supply Hi-Speed Transceiver PRODUCT FEATURES -IF Battery Charging 1.2 Specification Compliant Link Power Management (LPM) Specification Compliant ESD protection circuits Up to ±25kV
More informationMC Channel FPGA Bridge IC. for. MIPI D-PHY Systems and SLVS to LVDS Conversion PRELIMINARY DATASHEET. Version August 2014.
MC20901 5 Channel FPGA Bridge IC for MIPI D-PHY Systems and SLVS to LVDS Conversion PRELIMINARY DATASHEET Version 1.06 August 2014 Meticom GmbH Meticom GmbH Page 1 of 17 Revision History MC20901 Version
More informationFeatures MIC2551A VBUS R S. 1.5k D+ D GND VM D SPD SUS GND. Typical Application Circuit
MIC2551 USB Transceiver General Description The MIC2551 is a single chip transceiver that complies with the physical layer specifications of the Universal Serial Bus (USB) 2.0. It supports both full speed
More informationSY89645L. General Description. Features. Block Diagram. Applications. Markets. Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer
Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer General Description The is a 3.3V, fully differential, low skew, 1:4 LVDS fanout buffer that accepts LVTTL or LVCMOS inputs. It is capable
More information7-Port Charging Station for USB Devices
7-Port Charging Station for USB Devices Product ID: ST7CU35122 This USB charging station lets you set up an external, multiport dedicated station for charging tablets, smartphones and other mobile devices.
More informationDSC2033. Low-Jitter Configurable Dual LVDS Oscillator. General Description. Features. Block Diagram. Applications
General Description The series of high performance dual output LVDS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device
More informationHT82M98A. 3-Key 3D USB+PS/2 Mouse Controller. Features. General Description. Block Diagram
3-Key 3D USB+PS/2 Mouse Controller Features Operating voltage.v~5.25v Complete Universal Serial Bus specs V1.1 compatibility Serial Bus Interface Engine (SIE) USB transceiver Microsoft 3D Intelli mouse
More informationZLED7002. Toggle (Side-Step) Dual-Channel LED Driver. Datasheet. Features. Brief Description. Benefits. Available Support. Physical Characteristics
Toggle (Side-Step) Dual-Channel LED Driver ZLED7002 Datasheet Brief Description The ZLED7002 toggle (side-step) dual-channel LED driver is one of our ZLED family of LED control ICs. It operates in the
More informationSF100 programmer Serial Flash In System Programming solution
4F-2, N16, Jin Jhou St, Taipei, Taiwan, ROC SF100 programmer Serial Flash In System Programming solution The Innovative solution to update the Serial Flash on board High performances for low price USB
More informationXR32220 Evaluation Board User s Manual
XR32220 Evaluation Board User s Manual Introduction Exar s XR32220 EVB evaluation board provides a platform on which to examine the features and performance of the XR32220 2-Driver/2-Receiver RS-232 serial
More information