Owner s Manual Havis Docking Station For the Havis ipad Protective Case

Transcription

1 Owner s Manual Havis Docking Station For the Havis ipad Protective Case DS-APP-100 Series DS-APP-102 DS-APP-112 PKG-DS-APP-102 PKG-DS-APP-112 PKG-DS-APP-132 PKG-DS-APP

2 Before Beginning (Original Instructions) Havis is pleased to provide this Owner s Manual to aid in the proper installation and use of the DS-APP-100 Series Docking Station for the Havis ipad Protective Case. For questions regarding the set-up of your DS-APP-100 Series Docking Station, please contact Havis at or visit for additional product support and information. This Owner s Manual applies to the following Part Numbers: DS-APP-102 DS-APP-112 PKG-DS-APP-102 PKG-DS-APP-112 PKG-DS-APP-132 PKG-DS-APP-142 NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE. DO NOT USE COMPUTER WHILE DRIVING. READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION. 2

3 Table of Contents Specifications Port Replication Capability Parts Included Installation Cable Management Operation - Docking Operation - Undocking Supplying Power to ipad Precautions Do not place metal objects or containers of liquid on top of the Docking Station If a malfunction occurs, immediately unplug the Power Supply and remove the tablet Do not store the Docking Station where water, moisture, steam, dust, etc. are present Do not connect cables into ports other than what they are specified for Do not leave the Docking Station in a high temperature environment (greater than 85 C, 185 F) for a long period of time Specifications Power Supply Input Dimensions 12.0 V DC-In Weight 1.6 lbs ( 0.68 kg ) 10.8 ( 27.5 cm) H x 6.9 ( 17.6 cm ) W x 3.1 ( 8.0 cm ) D Operating Environment 0 C to 35 C ( 32 F to 95 F ) Storage Environment -40 C to 85 C ( -40 F to 185 F ) EC DECLARATION OF CONFORMITY in accordance with EN Manufacturers Name: Havis, Inc. Manufacturers Address: 75 Jacksonville Road, Warminster, PA USA Declares under our sole responsibility that the product: Product name: Havis Docking Station For Havis ipad Protective Case Model: DS-APP-1XX, where X may be any alphanumeric character and which describes product options. May be followed by any alphanumeric characters which describe product options. Product Options: This declaration covers all options of the above product which bear the CE Marking. Is in conformity with the following standards or other normative documents: EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55024:2010, Information technology equipment - Immunity characteristics - Limits and methods of measurement Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS) BS EN 50498:2010: Section 7, after market electronic equipment in vehicles. Supplementary Information: The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the use of the provided e-marked automotive power supply when used within vehicles. Warminster, PA, USA March 14, 2014 Bruce Jonik, Director of Engineering, Havis, Inc. FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-APP-1XX not expressly approved by Havis, Inc. could void the user's authority to operate this equipment

4 Port Replication Capability TOP of Docking Station Power Input DC IN 12V PWR LED Power Indicator BOTTOM of Docking Station Parts Included Hardware Kit 1. Zip Ties (5) 2. Keys (2) 3. 1/4-20 x 5/8 long Button Head Screws (5) 4. M4 x 0.7 x 12mm long Pan Head Screws (5) 5. Washers, M4 (5) 6. Lock Washers, M4 (5) Extra hardware (screws) provided Tools required for installation: 5/32 Hex Drive (For attaching Docking Station to Mount with Button Head 1/4-20 Screws) #2 Philips Screwdriver (For attaching Docking Station to VESA 75mm hole pattern equipment with Pan Head M4 x 0.7 x 12mm Screws) 4

5 Parts Included Docking Station Latch Handle FRONT All Models Barrel Lock Locator Pin Latch Tab Docking Connector BACK Mounting Hole (x4) Ports Strain Relief

6 Installation 1) Identify your required mounting configuration and select the appropriate fasteners from the Hardware Kit. OPTION A: Havis vehicle motion/mounting equipment. Use Hardware Kit Item 3 (1/4-20x5/8 long Button Head Screws) OPTION B: Motion/mounting device with VESA 75mm hole pattern. Use Hardware Kit Item 4 (M4 x 0.7x12mm long Pan Head Screw), Hardware Kit Item 5 (Washers, M4), and Hardware Kit Item 6 (Lock Washers, M4) OPTION C: Other mounting surfaces without rear access. Hardware not supplied, use appropriate hardware for preferred mounting surface. OPTION A INSTALLATION: A) Using a 5/32 Hex Drive (not provided), remove the Rigid Mount Bracket from the Docking Station by removing the four (4) 1/4-20 x 1/2 Button Head Screws and set aside for use in Step C. Docking Station Mounting Bracket 1/4-20 x 1/2 Button Head Screws B) Align the Rigid Mount Bracket holes with the holes on the mounting device. Using the (4) 1/4-20 x 5/8 Button Head Screws (Hardware Kit Item 3), secure the Rigid Mount Bracket to the mounting device. Torque screws to 80 in-lbs (9.0Nm) ± 10%. Rigid Mount Bracket 1/4-20 x 5/8 Button Head Screws Motion/Mounting Device C) Align the Docking Station Mounting Locations with the holes on the Rigid Mount Bracket. Using the (4) 1/4-20 x 5/8 Button Head Screws (retained from Step A), secure the Docking Station to the Rigid Mount Bracket. Torque screws to 40 in-lbs (4.5Nm) ± 10%. Docking Station Rigid Mount Bracket 6 1/4-20 x 1/2 Button Head Screws

7 Installation (continued) OPTION B INSTALLATION: A) Align the Rigid Mount Bracket holes with the VESA 75mm holes on the mounting device. Using the (4) M4 Pan Head Screws (Hardware Item 4), (4) Washers, M4 (Hardware Item 5) and (4) Lock Washers, M4 (Hardware Item 6) secure the Rigid Mount Bracket to the mounting device from the rear. Torque screws to 20 in-lbs (2.3Nm) ± 10%. Docking Station Washer, M4 Lock Washer, M4 M4 x 0.7x12mm Pan Head Screws Mounting Device (VESA 75 mm) OPTION C INSTALLATION: A) Using (2) fasteners appropriate for the mounting surface (not included), secure the Rigid Mount Bracket through the access holes via the front of Docking Station. 3.0 Access to Rigid Mount Bracket via front of Docking Station Mounting Surface appropriate fasteners Mounting Surface hole pattern (For reference only)

8 Cable Management 1) Tip the Docking Station to a position that is comfortable to work with. 2) Install power cable as necessary for your computing needs. 3) Use Zip Tie (Hardware Kit Item 1) to strain relieve cable. Use a Strain Relief Point to anchor the cable. If desired for routing purposes, additional Strain Relief Points on each side of Docking Station may be used. 4) Create a service loop with the cable to ensure that no tension is on the connector and to enable intended motion. 5) Tie off the cable onto a stationary part of the mounting system. This loop must be large enough to allow full range of expected rotation and extension without stressing connection. Collect cable and secure to the mounting system. (Note: Mounting system not included) 8

9 Operation - Docking DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF TABLET ON DOCKING STATION. NOTE: Ensure a proper connection by aligning the tablet s Alignment Sockets with the Docking Station s Alignment Posts Alignment Posts DS-APP-100 Series Docking Station Alignment Sockets Back Side of tablet in Protective Case 1) Ensure Docking Station is unlatched by lifting Latch Handle. 2) Hold tablet in landscape orientation, with bottom angled toward Docking Station. Lower tablet into the bottom of the Docking Station

10 Operation - Docking (continued) 3) Pivot tablet so the top aligns with the Locator Pin at the top of the Docking Station. Lower the Latch Handle to secure tablet in place. Latch Tab will engage in front of Protective Case 4) For theft deterrence, secure tablet by locking Docking Station with supplied key (Hardware Kit Item 2). Operation - Undocking 1) If previously locked, unlock Docking Station using supplied key. 2) While holding tablet with one hand, lift the Latch Handle on the top of Docking Station. 3) Once unlatched grab both sides of tablet, rock the top forward and carefully lift out of Docking Station, top end first. 10

11 Supplying Power to ipad Use the supplied power cable to charge your ipad once its securely docked. Plug barrel connector into the back of the Docking Station, and the cigarette lighter adaptor into the vehicle power source. To Docking Station To Vehicle Power Source

12 Related Products Havis offers a wide variety of accessory products specifically for use with the DS-APP-100 Series Docking Station. For more information or to order, please visit DS-DA-218 Desktop Stand for Tablet Docking Stations Durable stand for mounting tablet Docking Stations for use in the home or office. DS-DA-700 Series Apple ipad Protective Case Protective Cases for Havis DS-APP-102 & DS-APP-112 will accommodate Apple ipad 2, 3, 4, 5, Air, Air 2, & Pro 9.7 DS-DA-503 Replacement Keys Set of two (2) replacement keys for DS-APP-100 Series Docking Stations. Havis, Inc. 75 Jacksonville Road Warminster, PA DS-APP-100-SERIES_OMN_9-17