UCI ASTM-A , DIN , JB-T

Transcription

1 Ultrasonic Portable Hardness Tester UCI ASTM-A , DIN , JB-T Advanced Ultrasonic Hardness Tester UCI 3000 applies ultrasonic contact impedance method to do comparative hardness measurement for testing pieces, with the high accuracy, efficiency, portability and easy operation. UCI 3000 is a high-precision portable device for quick measuring hardness of small fogging, cast material, weld inspection, heat affected zone, Ion-nitride stamping dies and molds, forms, presses, thin walled parts, bearings, tooth flanks, etc. It is used for measuring the hardness within the ranges of main hardness scales HB, HRC as well as HV. The device has a plug and measure interactive interface, programming functions and additional scales for the provided nonstandard. This hardness tester is optimal for field, workshop or laboratory conditions. Main Features: Accuracy - ±3% HV, 1.5% HR, 3%HB. Microscopic Indentation Only high-power microscope can observe the indentation. Quick Measurement Result in 2 seconds. Large LCD Display Direct display measurement result, time count, maximum, minimal, average and deviation. Operation Operate well after short training. Storage Save 1000 groups measurement data. Simple Calibration Save 20 groups calibration data for invoking, improve calibration efficiency. Interface Works as per PLUG AND MEASURE principle. Warranty 2-year Warranty for main unit (Excludes Probe). Includes: Instrument main body; 2Kgf manual Probe HP-2K; Probe Silicon Cap; Accessories Box; Instrument Operation manual; Calibration certificate; Probe cable; USB Cable. Loading Force Measuring Range Measuring Accuracy Technical Specifications 2Kgf (Optional Manual: 1Kgf, 5Kgf, 10Kgf) (Optional Motorized: 3Kgf, 5Kgf, 8Kgf, 10Kgf) HV: ; HBS: ; HRC: 20-70; HRB: ; HRA:37-85 HV: ±3% HV, HR: 1.5% HR, HB: 3%HB Data Storage To save 1000 groups of measuring data and 20 groups of calibration data Data output Hardness Scale RS232 Hyper Terminal / Bluetooth printer Vickers (HV), Rockwell C (HRC), Rockwell A (HRA), Rockwell B (HRB), Brinell (HB) 1

2 Data Display Hardness Indication Operating Environment Operating Voltage Instrument Dimensions Shipping Dimensions Net Weight Shipping Weight Loading force, testing-times, testing result, average, maximum, minimum, deviation and conversion scale LCD Temperature:-10 C~50 C; Humidity:30 C~80%R.H 4.2 V 160x80x31mm 320x430x155mm Approximate 500g (without probe) 4.3 Kg Applications: Ultrasonic Hardness Tester is widely used to measure hardness of flange edges and gear root of stamping parts, molds, sheets, hardening surface of the tooth and gear and taper part hardness, hardness of the shaft, pipe including inside and outside wall, container, wheel, turbine rotor, bit blade, HAZ weld, printing roller, injection molding machine screw parts etc. 2

3 Optional Accessories: Manual Probe Features: Introduced latest ultrasonic sensor technology Obtain accurate hardness value without auxiliary devices Support 360 quick measuring Excellent human engineering design easy to hold Suitable dimension and weight of probe is convenient to control Quick and accurate measuring for edge and fixed position of specimen Micro indentation, Non- Destructive for specimen Specifications: Probe Type UC3-HP-1K UC3-HP-2K UC3-HP-5K UC3-HP-10K Loading Force 10N 20N 50N 98N Diameter 22mm 22mm 22mm 22mm Length 154mm 154mm 154mm 154mm Oscillating Rod Diameter 2.4mm 2.4mm 3mm 3mm Roughness of measuring surface Ra<3.2um Ra<5um Ra<10um Ra<15um Min. weight of test material 0.3kg 0.3kg 0.3kg 0.3kg Min. thickness of test material 2mm 2mm 2mm 2mm Extended Probe: Extended Probe is used for measurement under extreme space limitation or on the floor of grooves, the length is 83.9mm for probe part. Short Probe: Short probe is for internal wall of tube, total length is 91.5mm. 3

4 Manual Probe Test Stand (For Manual Probe) Motorized Probe Test Stand-I (Used to test hardness of big specimens with curved surface) Motorized Probe Test Stand-II (Equipment s with a magnet, used to firmly hold specimens, more portable than Motorized Probe Test Stand-I, also can test place surface Motorized Probe Test Stand III (Upgraded from Manual Probe Test Stand, to test small specimens. 4

5 Standard Hardness Block Plan Support Ring Small Cylinder Support Ring Big Cylinder Support Ring UCI Support Ring V Shape Support Ring Standard Probe Protector Deep- Hole Probe Protector UCI Probe Cap 5