SYMBOL UNIT min max Conditions Operating Temperature Storage Temperature Lead Solder Temperature Forward Current Reverse Voltage

Size: px

Start display at page:

Download "SYMBOL UNIT min max Conditions Operating Temperature Storage Temperature Lead Solder Temperature Forward Current Reverse Voltage"

Calvin Moody
5 years ago
Views:

1 SubAssemblies EPA InGaAs PIN PIGTAIL High responsivity Low dark current Fast pulse response Low intermodulation distortion Suitable for CATV application Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Forward Current Reverse Voltage Ta C TSTG C Tsol C seconds If ma 3 Vr V 20 ElectroOptical Specifications (Operating at Vr =5V 9/125um SM fiber) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Responsivity Dark Current Breakdown Voltage Capacitance Second Order Inter Modulation Distortion λ nm R A/W λ=1310nm Id na 4 Ta=25 C VBD V 40 IR=10uA C pf 0.7 f=1 MHz λ=1310nm, 2 laser IMD2 dbc tone, OMD=70% each Pin=0dBm, (Note 1) Band Width BW GHz 3 Note: 1 modulation input light signal come from two independent laser source with a modulation Outline Dimension: TYPE K Description Anode Cathode Case NC Bottom View FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 139

2 SubAssemblies InGaAs PIN PIGTAIL Outline Dimension: Drawing A: Drawing B: Ordering Information: Bandwidth 3G 3 GHz PIN Type I InGaAs PIN G GaAs PIN Connector Type ST ST/PC LC LC/PC AL LC/APC SC SC/PC AS SC/APC NC Without Connector FC FC/PC AP FC/APC Fiber Type A SingleMode 9/125µm Cable Type B Bare fiber T Simplex, PVC tight buffer cable(0.9mm) H Simplex, Hytrel tight buffer cable(0.9mm) X Other, please specify Pin Assignment K K Type Flanger N Without Flange X Other, please specify Fiber Length X050 50cm X cm X cm X cm Mechanical Dimensions 0 Drawing A 1 Drawing B E PA 3G K X 4A 140 FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

3 SubAssemblies EPR 155 Mbps PINTIA PIGTAIL Optimized for fiber optic application Suitable for 100/155 Mbps applications Support 3.3V and 5V applications SM/MM fiber pigtailed with optional FC/ST/SC connector ElectroOptical Specifications (Operating at Vcc =3.3V 9/125um SM fiber) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Supply Voltage Supply Current Differential Output Voltage Single Ended Differential Bandwidth λ nm Vcc V Icc ma 35 No load V mv 700 Gs mv/uw λ=1310nm, Rload=50Ω Gd mv/uw λ=1310nm, Rload=100Ω BW MHz 115 R=50Ω Sensitivity Sens dbm 36 λ=1310nm, 155Mbps BER=10 10 PRBS23 Saturation Power Output Resistance (Single Ended) Psat dbm 3 λ=1310nm Rout ohm 50 Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Ta C TSTG C Tsol C seconds FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 141

4 SubAssemblies EPR 622 Mbps PINTIA PIGTAIL SM/MM fiber pigtailed with optional FC/ST/SC connector Optimized for fiber optic application 622 Mbps applications Single power supply +3.3V applications ElectroOptical Specifications (Operating at Vcc =3.3V 9/125um SM fiber) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Supply Voltage Supply Current Bandwidth λ nm Vcc V Icc ma No load BW MHz R=50Ω Sensitivity Sens dbm λ=1310nm, 622 Mbps PRBS23 ER=10 BER=10 10 Saturation Power Output Resistance (Single Ended) Psat dbm 0 λ=1310nm Rout ohm 50 Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Supply Voltage Ta C TSTG C Tsol C seconds Vcc V FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

5 SubAssemblies EPR 1.25 Gbps PINTIA PIGTAIL SM/MM fiber pigtailed with optional FC/ST/SC connector Optimized for fiber optic application 1.25 Gbps applications Single power supply +3.3V applications ElectroOptical Specifications (Operating at Vcc =3.3V 9/125um SM fiber) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Supply Voltage Supply Current Bandwidth λ nm Vcc V Icc ma No load BW MHz 700 R=50Ω Sensitivity Sens dbm λ=1310nm, 1.25 Gbps PRBS7 ER=10 BER=10 10 Saturation Power Output Resistance (Single Ended) Psat dbm 0 λ=1310nm Rout ohm 50 Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Ta C TSTG C Tsol seconds FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 143

6 SubAssemblies PINTIA PIGTAIL Outline Dimension: PIN Position B Function Dout Dout + GND Vcc Bottom View Ordering Information: Data Rate Mbps Mbps Gbps PIN Type I InGaAs PIN G GaAs PIN Power Supply D 5V V 3.3V O 3.3V/5V Connector Type ST ST SC SC FC FC NC No connector Fiber Type A SingleMode SMF 9/125µm D MultiMode 62.5/125µm C MultiMode 50/125µm Cable Type T Simplex, PVC tight buffer cable(0.9mm) H Simplex, Hytrel tight buffer cable(0.9mm) X Other, please specify PIN Assignment B B Type Flange N without flange K K Type flange O O Type flange Fiber Length X050 50cm X cm X cm X cm E PR X 4A FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

SubAssemblies ERA InGaAs PIN PECEPTACLE High responsivity Low dark current Fast pulse response Low intermodulation distortion Suitable for CATV application FC/ST/SC/LC receptacle package Absoluate

7 SubAssemblies ERA InGaAs PIN PECEPTACLE High responsivity Low dark current Fast pulse response Low intermodulation distortion Suitable for CATV application FC/ST/SC/LC receptacle package Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Forward Current Reverse Voltage Ta C TSTG C Tsol C seconds If ma 3 Vr V 20 ElectroOptical Specifications (Operating at Vr =5V 9/125um SM fiber) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Responsivity Dark Current Capacitance Breakdown Voltage Second Order Inter Modulation Distortion λ nm R A/W λ=1310nm Id na 4 Ta=25 C C pf 0.7 f=1 MHz VBD 40 IR=10uA λ=1310nm, 2 laser IMD2 dbc tone, OMD=70% each BW GHz Pin=0dBm, (Note 1) Band Width BW GHz 3 Note: 1 modulation input light signal come from two independent laser source with a modulation frequency f1=244mh,f2=250mhz repectively FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 145

8 SubAssemblies InGaAs PIN RECEPTACLE Outline Dimension: TYPE K Description Anode Cathode Case NC Bottom View Mechanical Dimension: ERA3GISTKM14A0 ERA3GIFCKM14A0 ERA3GIOSKP14A0 ERA3GIOLKP14A0 Ordering Information: Bandwidth 3G 3 GHz PIN Type I InGaAs PIN Connector Type ST ST FC FC OS OSA SC OL OSA LC Pin Assignment K K Type Exterior M1 Metal Housing P1 Plastics Housing E RA 3G I K 4A FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

9 SubAssemblies ERR 155 Mbps PINTIA RECEPTACLE Optimized for fiber optic application Suitable for 100/155 Mbps applications Support 3.3V and 5V applications SC, LC type Receptacle package ElectroOptical Specifications (typical value are at Vcc=3.3v) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Supply Voltage Supply Current Differential Output Voltage Single Ended Differential Bandwidth λ nm Vcc V Icc ma 35 No load V mv 700 Gs mv/uw λ=1310nm, Rload=50Ω Gd mv/uw λ=1310nm, Rload=100Ω BW MHz 115 R=50Ω Sensitivity Sens dbm 36 λ=1310nm, 155Mbps BER=10 10 Saturation Power Output Resistance (Single Ended) Psat dbm 3 λ=1310nm Rout ohm 50 Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min ma Conditions Lead Solder Temperature Ta C TSTG C Tsol seconds FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 147

10 SubAssemblies ERR 622 Mbps PINTIA RECEPTACLE SC, LC type Receptacle package Optimized for fiber optic application 622 Mbps applications Single power supply +3.3V applications ElectroOptical Specifications (Typical value are at Vcc=3.3v) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Supply Voltage Supply Current Bandwidth λ nm Vcc V Icc ma No load BW MHz R=50Ω Sensitivity Sens dbm λ=1310nm, 622 Mbps PRBS23 ER=10 BER=10 10 Saturation Power Output Resistance (Single Ended) Psat dbm 3 λ=1310nm Rout ohm 50 Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Supply Voltage Ta C TSTG C Tsol C seconds Vcc V FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

11 SubAssemblies ERR 1.25 Gbps PINTIA PECEPTACLE SC, LC type Receptacle package Optimized for fiber optic application Gbps applications Single power supply +3.3V applications ElectroOptical Specifications (Typical value are at Vcc=3.3v) SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Detection Range Supply Voltage Supply Current Bandwidth λ nm Vcc V Icc ma No load BW MHz 700 R=50Ω Sensitivity Sens dbm λ=1310nm, 1.25 Gbps PRBS7 ER=10 BER=10 10 Saturation Power Output Resistance (Single Ended) Psat dbm 0 λ=1310nm Rout ohm 50 Absoluate Maximum Ratings (Tc=25C) SYMBOL UNIT min max Conditions Lead Solder Temperature Ta C TSTG C Tsol seconds Outline Dimension: PIN Position Function B Dout Dout + GND Vcc Bottom View FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 149

12 SubAssemblies PINTIA RECEPTACLE Mechanical Dimension: ERRXIXSTBM14A0 ERRXIXFCBM14A0 ERRXIXOSBP14A0 ERRXIXOLBP14A0 Ordering Information: Datarate Mbps Mbps Gbps PIN Type I InGaAs PIN G GaAs PIN Power Supply D 5V V 3.3V O 3.3V/5V Connector Type ST ST FC FC OS OSA SC OL OSA LC PIN Assignment B B Type Exterior M1 Metal Housing P1 Plastics Housing E RR I B 4A FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

13 SubAssemblies ERT VCSEL RECEPTACLE FC, ST, SC and LC receptacle for Multimode fiber communication Package with Monitor PD Design for 1.25/2.5 Gbps data rate operation Common anode and Common cathode ElectroOptical Specifications SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Threshold Current Slope Efficiency Peak Wavelength RMS Spectral Width Forward Voltage Series Resistance Ith ma CW η mw/ma IF=7mA λ P nm IF=7mA λ P nm 0.85 IF=7mA Vf Volt IF=7mA Rs Ω 50 IF=7mA Temperature Characteristics Threshold Current Temperature Variation Slope Efficiency Temperature Variation Peak Wavelength Temperature Variation SYMBOL UNIT MIN. TYP. MAX. TEST CONDITIONS Ith ma C to 85 C η / T % / C 0.4 IF=7mA, 0 C to 85 C λ P / T nm / C 0.06 IF=7mA, 0 C to 85 C Absolute Maximum Ratings (T=25 C unless otherwise stated ) SYMBOL UNIT MIN. MAX. Lead Solder Temperature Continuous Reverse Voltage Continuous Forward Current Laser Forward Current, Instantaneous Tstg C Top C 0 85 Tsold C 260 C for 10 seconds VR Volt 5 (@10uA) IF ma 12 IF ma 17 FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 151

14 SubAssemblies VCSEL RECEPTACLE Outline Dimension: PIN Position Description A (Common Anodel) VCSEL Anode PD Cathode PD Anode Case VCSEL Cathode B (Common VCSEL Cathode PD Anode PD Cathode Case VCSEL Anode Bottom View Mechanical Dimension: ERT5O0850STXM1N4C0 ERT5O0850FCXM1N4C0 ERT5O0850OSXP1N4C0 ERT5O0850OLXP1N4C0 Ordering Information: Data Rate Gbps Gbps Laser Type O Oxide VCSEL Wavelength nm Connector Type ST ST FC FC OS OSA SC OL OSA LC Pin Assignment A A Type B B Type Exterior M1 Metal Housing P1 Plastics Housing E RT 5 O 0850 N4B FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

SubAssemblies ETD TAP MONITORING DETECTORS Custom tap ratio available Low dark current Compact size Ultra flat, broadband spectral response Applications: Power monitoring in protecting switches Gain

15 SubAssemblies ETD TAP MONITORING DETECTORS Custom tap ratio available Low dark current Compact size Ultra flat, broadband spectral response Applications: Power monitoring in protecting switches Gain monitoring for fiber amplifier Power monitoring for OADM system SYMBOL MIN MAX UNIT REMARK Photodiode Bias Voltage Vbias 14 2 V TOP 0 70 C TStg C Soldering Temperature TSol 350 C <3sec. SYMBOL MIN TYP. MAX UNIT REMARK Detection Range nm Dark Current Idark 1 na Capacitance C pf Bandwidth BW 2 GHz Responsivity R A/W λ=1310nm Breakdown Voltage VBD IR:10uA Backreflection BR 45 db PDL 0.1 db PMD 0.1 ps Wavelength flatness 0.2 db Tap Ratio 98:2 95:5 90:10 Optical insertion loss (db) Saturation optical power (dbm) Photodiode tap responsivity (A/W) Note: Excluding connectors. FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 153

16 SubAssemblies TAP MONITORING DETECTORS Diagram & Dimension: Ordering Information: Speed PIN Type Fiber Type A SMF Wavelength nm nm & 1550 nm Tap Ratio : : : 10 Fiber Length meter X cm XXXX Please specify Connector Type SC SC type ST ST type NC None XX Others Checking Number E TD 3PA BMF 154 FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

SubAssemblies EWD INTEGRATED WDM DETECTORS Environmentally stable Low dark current Low return loss Low insertion loss Wide wavelength range High isolation Applications: PON system upgrade FTTP SYMBOL

17 SubAssemblies EWD INTEGRATED WDM DETECTORS Environmentally stable Low dark current Low return loss Low insertion loss Wide wavelength range High isolation Applications: PON system upgrade FTTP SYMBOL MIN MAX UNIT REMARK TOP 0 70 C TStg C Soldering Temperature TSol 350 C <3sec. SYMBOL MIN TYP. MAX UNIT REMARK Detection Range nm Dark Current Idark 1 na Capacitance C pf f = 1MHz Bandwidth BW 2 GHz Responsivity R A/W λ=1310nm Breakdown Voltage VBD IR:10µA 13/15 15/13 14/15 15/14 Transmission(Com to PD port) Wavelength Range, nm & Reflection(Com to Express port) Wavelength Range, nm & Insertion Loss, db <0.6 Reflection Ripple, db <0.3 Reflection PDL, db <0.15 PMD, ps <0.1 Transmission Isolation, db >40 >40 >40 >30 Reflection Isolation, db >15 Return Loss >45 Reflection Max. Power, mw 300 FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: 155

18 SubAssemblies INTEGRATED WDM DETECTORS Diagram & Dimension: Ordering Information: Speed PIN Type Fiber Type A SMF Cable Type L 900µm Loose tube Wavelength (Detected / Expressed) 13/ nm/ nm 14/ nm/ nm XX Others, Customer Specify Pigtail Length 10 1 meter meter 20 2 meter meter XX Others, please specify Connector Type NC None SC SC type ST ST type XX Others, please specify Checking Number E WD 3PA L BMF 156 FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

19 LSDUA USB 3.0 AOC (MM Fiber Optic USB 3.0 Extender) Extends USB 3.0 super speed devices up to 100 m over fiber optics Supports all USB 3.0 device types: control, interrupt, bulk and isochronous at up to 5 Gbps Operates with USB 3.0 super speed host controllers Supports all major operating systems including Windows, Mac OS, and Linux Number of devices can be increased using additional hubs Remote unit require standard power to USB AOC port Power adapter at host is not required Ideal for a wire variety of USB devices, from printer, scanners, hard drives,and audio devices, to touch screens, web cams, and game controllers Applications: Industrial Control Digital Signage Home Network Integration Medical Device Connectivity KVM Extension Remote Desktop USB 3.0 Connections Security: web camera, access control USB 3.0 Device Sharing: print, scan, storage Product Specifications: ITEM Range Optical Transceiver Operating temperature range Cable diameter Speed USB 3.0 AOC 330 ft (100 m) over multimode optical fiber 850 nm VCSEL (multimode) 0 C to 50 C 3.0 mm 5.0 Gbps Applications Reference: FOCI Fiber Optic Communications, Inc. TEL: FAX: Web: revised

20 USB 3.0 AOC (MM Fiber Optic USB 3.0 Extender) Ordering lnformation: The FOCI USB 3.0 AOC cables come with standard 10m, 20m, 30m, 50m and 100m, or customerized lenght with extra service charge. Name LSDUA LSDUA LSDUA LSDUA LSDUA Part Number Description 10 meter Fiber Optic USB 3.0 Extender 20 meter Fiber Optic USB 3.0 Extender 30 meter Fiber Optic USB 3.0 Extender 50 meter Fiber Optic USB 3.0 Extender 100 meter Fiber Optic USB 3.0 Extender 1562 FOCI Fiber Optic Communications, Inc. TEL: FAX: Web:

Detectors for Fiber Optics: InGaAs PIN Photodiodes

Detectors for Fiber Optics: InGaAs PIN Photodiodes PD-LD Inc. offers a variety of standard and custom PIN Photodiodes and APDs in fiber coupled packages, of proven manufacture and design. Our InGaAs devices are optimal from 1100 to 1650nm, and are available