WR1000 SERIES. Thermal Arraycorders. Color. Large-capacity. High-speed

Transcription

1 WR1000 SERIES Thermal Arraycorders Color Hard disk for 40 minutes of continuous data capture Large-capacity High-speed A high-performance recorder which gives you the freedom to add only the functions you require for your own specific measurement applications. The WR1000 for Data Signal Input, onitoring, Recording, and Data Capture.

2 The Ultimate easurement Tool Create your own application-specific machine one that s perfect for your own recording needs simply by adding on as many modular units as you need to the main unit. Easy-toread color display, high-speed recording, large-capacity data capture all the features you need for specialized measurement applications. onitor Streamlined 10.4-inch TFT color display for easy confirmation of menu settings and captured data Input Choice of 8, 16, 24, or 32 channel models Plug-in lifiers for channels 1 through 16 (2 channels per unit) Selection of eight lifier types available High-resolution 12-bit and 16-bit A/D conversion* Wide voltage range from 20 m to 500* * aries with the type of lifier Graphtec offers a range of add-on units for you to choose from a sound card which lets you record and search through voice data to confirm measurement conditions, a 100-m length Z-fold chart unit, a 20-m Z-fold chart unit which fits inside the main unit, an annotation tray which facilitates the writing of comments directly onto the chart, and DC drive units. Recording High speed Chart speeds up to 200 mm/s* Long-term 100-m length Z-fold chart * 25 mm/s maximum when 24 or 32 channels are used Sound Sound card unit m Z-fold chart unit* Annotation tray Automobile Industry DC DC drive* m Z-fold chart unit * aximum chart speed is 25 mm/s Add-on Units Collision Testing Unit Configuration Exle DC B SCSI erits to the User The 8 GB hard disk drive lets you directly capture a large amount of data at a high-speed sling rate, ensuring that you capture the valuable data at the time of the collision itself. The WR1000 can both capture large amounts of data and record it onto chart paper, eliminating the need for a separate data recorder and chart recorder. The measured data can be converted into TEXT format, enabling you to use commercially available software for data analysis and report creation. Bench Test Unit Configuration Exle F/ Lo SCSI Sound erits to the User With the WR1000 s large-capacity hard disk drive, you can capture data right from the start of measurement, not just from when an irregularity occurs. This means that you can see the trend up to when the irregularity occurred. And, if you want to check the data where the irregularity occurred, you can quickly and easily play back the data stored in memory by using the Level search function. The measured data can be converted into TEXT format, enabling you to make use of commercially available software for data analysis and report creation. Running Test Unit Configuration Exle FFT DC B Remote Sound DC 20 erits to the User Event marks are captured into memory at the same time as data is being recorded, thereby facilitating a search of the data using the event mark search function after measurement has been completed. The variety of s offered enables you to input signals directly through sensors, thus eliminating the need for a transducer. The 20-m Z-fold chart unit lets you use easy-to-store Z-fold charts even for in-vehicle testing.

3 Thermal Arraycorders Amplifier units are essential for capturing measurement phenomena. Channels 1-16 accept a range of plug-in lifier units, giving you the versatility to select and install different types to suit your measurement application. FFT DC B oltage FFT measurement DC strain Amp Units ulti-input F/ Frequency to voltage conversion Lo Logic measurement* H Z High voltage/rs Zero suppression * Dedicated slot; cannot be used for other lifier types Hard disk for 40 minutes of continuous data capture Data Capture ain Unit Data Storage Units 8 GB hard disk, 640 B OD, or FDD for data capture RS-232C, plus a GP-IB or SCSI interface 256 kwords/ch internal memory; upgradable to 512 kwords/ch 20 µs high-speed data capture* Several data search functions * 8-channel model, when is installed You need long-term, large-capacity data capture capability. Select from four different types of data storage units. You can also select several different methods to search through your data for the section you need. 512k memory 8 GB hard disk drive 512 kwords/ch internal memory Interface Units 3.5" OD 3.5" FDD 3.5" magneto-optic disk drive 3.5" floppy disk drive Select from four interface units to process and analyze your captured data. You can also use an interface to facilitate computer control of various measurement functions. RS- 232C RS-232C SCSI SCSI GP- IB GP-IB Remote Remote Power Companies Railways edical Research Turbine Inspection & aintenance Unit Configuration Exle H Lo erits to the User The zone and scale conversion functions enable you to overlap waveforms so that you can see at a glance whether there are any irregularities. The 8 GB hard disk has the same capabilities as a conventional data recorder and enables you to play back data quickly and easily. The 200 mm/s chart speed enables you to check the data in real time, right there on the spot. Running Tests on Rolling Stock F/ Unit Configuration Exle RS- 232C SCSI Sound 100 erits to the User The 8 GB hard disk enables you to perform long-term measurement. Furthermore, when you want to record the data onto chart paper, the long-length Z-fold chart unit lets you record up to 100 meters of data. Inputting event signals for the sections of data that you need for later analysis facilitates data playback by letting you see the data directly after each signal. The wide range of s lets you measure voltage, temperature, rpms, vibrations and logic signals with just one WR1000 unit. Animal Testing Unit Configuration Exle FFT SCSI Sound 20 erits to the User The measured data can be converted into TEXT or CS format, enabling you to make use of commercially available software for data analysis and report creation. The zone and scale conversion functions (engineering units) enable you to make recordings with parameters such as position, scale width and unit specified as needed. You can add annotation as required to each channel The 100-m Z-fold chart unit enables you to record and store large amounts of data in an easy-to-store format.

4 Hard disk for 40 minutes of continuous data capture Data Capture A range of memory devices is provided for data capture select the 8 GB hard disk drive, the O disk drive, or the 512 kwords/channel internal memory to suit your recording applications. A choice of interfaces is also offered for computer control, data transmission, and data output. You can even use your WR1000 as a data recorder. Select your memory device to suit your required data capture time and sling speed Graphtec's large-capacity data storage devices enable you to measure data continuously, so that you don't lose any valuable data. 8 GB hard disk drive (Four 2 GB partitions): Continuous measurement for around 40 minutes at a 20 µs* 1 sling speed for 8 channels of data 512 kwords/ch internal memory: 1 µs* 2 sling speed enables the capture of high-speed events; data is captured on all channels in seconds 3.5" magneto-optic disk drive: Captures data for 8 channels at a maximum 500 µs* 3 sling speed; stores data captured on the hard disk or in internal memory (cannot be installed concurrently with the FDD) 3.5" floppy disk drive: Comes standard with the WR1000; is used to store short-term measurement data and setup parameters (cannot be installed concurrently with the O drive) *1 100 µs maximum when 24 or 32 channels are used *2 aries with the type of installed *3 2 ms maximum when 24 or 32 channels are used Capturing data to an 8 GB hard disk Sling speed: 20 µs (max.) No. of measurement channels : 8 Data capture of around 40 minutes of continuous measurement Now you can perform long-term, continuous measurement and capture of data and eliminate the possibility of errors that may be caused by analyzing several short-term blocks. (2 GB is the maximum size of a data file) Car Engine Functions ibration Pressure RPs Temperature etc. 512 kwords/ch memory (built-in) 8 GB hard disk drive (built-in) RS-232C GP-IB WR1000 control Transmission of measurement data Computer O disk drive (built-in) SCSI Output of measurement data (TEXT format) External hard disk, O or ZIP drive, PCCIA media easurement Data Capture Times Data capture unit 256 kwords/ch memory 512 kwords/ch memory Hard disk (2 GB) O disk (640 B) 1µs 0.256s 0.512s 10µs 2.56s 5.12s 20µs 5.12s 10.24s 41.6min Powerful search functions enable you to find the data you need quickly and easily When you have captured a huge amount of data, you can use our various search functions to quickly locate the data you need to look at. Date & time search: Searches your data from the specified date and time Level search: Specifies the search level (voltage) then searches for data above or below Event search: Searches for event data input during measurement Skip search: Searches while sending data at a fixed amount Sound marker search: Searches through voice data recorded during measurement Exle Event signal easurement level 100% easurement level 75% easurement level 50% Selection of interfaces for computer-based measurement You can configure your system for computer control of your WR1000, and for data transmission. You can also select a file format to enable easy reading of data captured and stored on external data storage devices. SCSI Interface: Converts the measurement data into TEXT format so that it can be read by your hard disk, O or Zip drive, or PCCIA media. (Use a hard disk or SCSI interface recommended by Graphtec. Graphtec does not, however, provide support for the connection between the hard disk and your computer.) RS-232C or GP-IB Interface: When connected to your PC, this interface is used to control the WR1000 and for the transmission of measurement data. The RS-232C interface comes standard with the WR1000. Remote Interface: Controls the WR1000 using TTL level signals. Note: The SCSI and GPIB interfaces cannot be concurrently installed 100µs 25.6s 51.2s 3.4h Sling speed 500µs 2.1min 4.2min 17.3h 5.5h 1ms 4.2min 8.5min 1.4 days 11.1h Date & time search: January 20, 2000, 15:30:52(hh:mm:ss) Level search: 75% Event search Skip search: 20 s easurement date: January 20, 2000 easurement time: 15:30:10 (hh:mm:ss) Event search points Skip search point Level search points 10ms 42.6min 1.4h 14 days 4.6 days (when measuring on 8 channels) 100ms 7.1h 14.2h 144 days 46 days 1s 2.9 days 5.9 days 1,446 days 462 days 5s 14 days 29 days 7,233 days 2,314 days Date & time search point 15:30:52 easurement level 0% Number of measured points [s] Sound marker Start of measurement Fast oscillation 10 seconds Lowest value 20 seconds Peak 30 seconds Gradual fall 40 seconds End of measurement [ ] Comments in brackets are exles of captured voice data

5 Dedicated keys and simple menu for easy operability Dedicated control panel keys are provided for your basic setups. The WR1000 keys have an analog look and feel, and enable you to make your interactive menu settings quickly and easily. Amp setting keys for each channel Character input keys Chart speed keys - the speed can be changed even during recording Input Thermal Arraycorders The maximum number of input channels is 32. Channels 1 through 16 use plug-in s select from a wide range to suit your application. In addition, dedicated keys such as those you find on a conventional analog recorder are provided for settings simple and easy. enu keys enu setup keys to change and register your settings Large-format color display for detailed data presentation and convenient calculations Scaling function: This function lets you change the value and unit of the measurement signal so that you can directly read the physical value of the measured object. Input signal 0 to 5 Setting exle After scaling 5 to 25kg onitoring The large-format 10.4-inch color TFT screen enables you to display measured data in waveform and level formats in full color. Input values, as well as the EAS., RANGE, POSITION, and FILTER settings for each channel can also be confirmed at a glance. Furthermore, performing calculations on the input signals enables you to understand the measurement conditions more easily. Level display of input signals Snapshot function press the Copy key to enable a 2-screen comparison of a static waveform with the realtime waveform Digital display of input signals The fastest chart speed among recorders in its class, plus many other innovative functions The WR1000 features a 200 mm/s* 1 chart speed, 8 dots/mm resolution for crisp, clear traces, and a user-specifiable chart recording format that lets you choose your own waveform recording start points and channel widths for even more flexibility. Default fixed formats User format CH.3 60mm 100-m Z-fold chart unit Recording Waveforms are recorded at speeds up to a fast 200 mm/s* 1, enabling realtime capture of fast-moving events. The 100-m length Z-fold chart enables long-term recording. The recording zones and spans can be set individually for each channel. *1 25 mm/s when 24 or 32 channels are used, and/or when a DC drive is used CH.4 200mm 20-m Z-fold chart holder unit CH.2 40mm CH.1 20mm Annotation tray for the writing of comments during measurement

6 Unit Configuration Unit type Unit name Part number Description ain Unit* 1 8-ch main unit WR Channels 1-8: plug-in s (maximum 4 slots) 16-ch main unit WR Channels 1-16: plug-in s (maximum 8 slots) 24-ch main unit WR Channels 1-16: plug-in s (maximum 8 slots) Channels 17-24: Dedicated 8-ch unit for voltage measurement 32-ch main unit WR Channels 1-16: plug-in s (maximum 8 slots) Channels 17-32: Two dedicated 8- ch units for voltage measurement Amp Units oltage ulti-input High-voltage/RS H/RS FFT FFT Frequency to voltage F/ conversion Zero suppression Z DC B strain DC B Logic Lo 16 channels/unit Data Storage Additional memory for 8-/16- B-389 User-specifiable; enables memory Units* 1 channel models to be increased from 256 kwords/ch to 512 kwords/ch Additional memory for 24- B-390 User-specifiable; enables memory channel models to be increased from 256 kwords/ch to 512 kwords/ch * 1 ust be specified at time of initial order for the main unit * 2 When the 8 GB hard disk drive and O drive are both installed, only one SCSI interface card is supplied Unit type Unit name Part number Description Additional memory for 32- B-391 User-specifiable; enables memory channel models to be increased from 256 kwords/ch to 512 kwords/ch 8 GB hard disk drive B-385 User-specifiable; comes with SCSI interface* 2 3.5" FDD Comes standard with main unit 3.5" OD B-384 User-specifiable; comes with SCSI interface* 2 ; replaces FDD Interface Units RS-232C Comes standard with the main unit GP-IB B-387 User-specifiable; cannot be installed concurrently with the SCSI interface SCSI B-386* 1 User-specifiable; cannot be installed concurrently with the GP- IB interface Remote interface Comes standard with main unit Sound Card Sound card unit B-388 Captures voice data onto the hard Unit* 1 disk; B-385 must be installed DC Drive* 1 DC drive for 8-/16-ch models B DC DC drive for 24-ch models B DC DC drive for 32-ch models B DC DC drive for 8-/16-ch models B DC DC drive for 24-ch models B DC DC drive for 32-ch models B DC Other Units 100-m length Z-fold chart unit B-392 Is mounted under the main unit 20-m length Z-fold chart unit B-405 Fits into the roll paper slot; enables use of 20-m lengths of Z-fold chart paper Annotation tray B-393 Enables the user to write comments directly onto the chart Specifications WR WR WR WR Basic specifications Analog input (max.) No. of slots : 4 No. of slots : 8 Ch 1 to 16: Ch 1 to 16: 2 ch/unit 2 ch/unit 8 slots; 2 ch/unit 8 slots; 2 ch/unit Ch 17 to 24: Ch 17 to 32: one 8-ch voltage unit two 8-ch voltage units Logic input No. of slots: 1; 16 ch/unit Interfaces RS232C; remote control (Start/Stop, Trigger in/out, EXT. Feed, /C Alarm) emory capacity 256 kwords/ch (memory expandable up to 512 kwords/ch) Data storage unit 3.5" FDD comes standard (for the storage of setup parameters and captured data) Display screen 10.4" TFT color display (640 x 480 dots) Recording method Thermal dot array (8 dots/mm) Chart paper Roll paper (PR231A, 210 mm width x 40 m length), black trace Operating environment 0 to 40ºC, 30 to 80% RH (5 to 35ºC when using printer) Power rating 100 to 120, 200 to 240 AC(automatically selected) 50/60Hz Power consumption Approx. 360 A Approx. 400 A Approx. 440 A Approx. 480 A External dimensions Approx. 405 x 336 x 140 mm* 3 Approx. Approx. (W) x (D) x (H) mm 405 x 336 x 180 mm* x 336 x 220mm* 3 Weight Approx. 9 kg* 4 Approx kg* 5 Approx. 13 kg* 5 Approx. 15 kg* 5 Recorder functions easurement conditions Realtime recording (data is directly recorded onto chart paper only) Realtime recording & data capture (data is directly recorded onto chart paper and simultaneously captured to a memory device) Data capture (data is captured to a memory device only) Waveform display Display format: Y-T, X-Y; measurement data of 8 channels Signal recording litude aximum 200 mm (1600 dots) Recording formats 200 mm x 1, 160 mm x 1, 100 mm x 1, 100 mm x 2, 80 mm x 2, 50 mm x 2, 50 mm x 4, 40 mm x 4, 25 mm x 8, 20 mm x 8, (12.5 mm x 16, 10 mm x 16), Zone Figures in ( ) refer to the 16-, 24-, and 32-channel models only Chart speeds 1, 2, 5, 10, 20, 50, 100, 200 mm/s, mm/min, mm/h, 1, 2 (user-settable chart speeds)* 6, External clock Recording accuracy Y : ±0.3% ±1 dot, T : ±2% ±0.5 mm Data capture Data being recorded onto chart paper can be simultaneously written to internal memory or to a memory device (, O) Annotation System annotation, channel annotation (10 to 64 characters) Specifiable printing interval 10 to 100 cm in 10-cm steps Logging function easurement conditions easured data display easurement/display/ recording interval Realtime recording (data is directly recorded onto chart paper only) Realtime recording & data capture (data is directly recorded onto chart paper and simultaneously captured to a memory device) Data capture (data is captured to a memory device only) easured data of any channel can be displayed as digital values using a screen split into 2, 4, 8, or (16) parts Figures in ( ) refer to the 16-ch model only 1 to 3600 seconds (in 1-s steps) WR WR WR WR Logging function Recording formats Day/month/year, measurement interval, hh:mm:ss, channel-specific measured data, minimum, maximum, and mean values Data transfer Output of ASCII data via the RS-232C or GP-IB interface (Data can be recorded on chart paper simultaneously) emory functions Sling speeds (1), (2), 4, 8, 10, 20, 40, 80, 100, 200, 400, 500, 800 µs 1, 2, 4, 8, 10, 20, 40, 80, 100, 200, 400, 500, 800 ms, 1, 2, 4, 5 s, EXT. clock (The sling speeds differ according to the type of installed) emory banks (Block) 1, 2, 4, 8, 16, 32, 64 or 128 blocks emory coupling (Expand) 8 ch x 1, 4 ch x 2, 2 ch x 4, 1 ch x 8 Waveform scaling Time axis 1/10, 1/8, 1/5, 1/4, 1/2, 1, 2, 4, 5, 8, 10 Cursor function Cursor readout, scroll and zoom Trigger functions Trigger source Start function: Internal, External, anual, Off Stop function: Internal, External, anual, Time, Off Trigger type Edge, Level, Count, Slope (d/dt), Filter Trigger slope Rising, Falling, Low, High Trigger level -100 to +100% (1% steps) and values set within ±FS of the specified range Pretrigger 0 to +100% in 1% steps Trigger function Record, emory Trigger action Single, Repeat Trigger gate OFF, relative time, absolute time Logic trigger Specifiable patterns: H (high), L (low), X (don't care) Calculation functions Scale value conversion The scale values and units are set with respect to the upper and lower limits of the desired measurement area Statistical calculation Area (Y-T, X-Y), AX, IN, P-P, Average, RS, standard deviation, rise time and fall time Specifiable range Range defined by cursors and the range (area) defined by cursors or waveforms Programmable calculations No. of terms: 32 maximum (operands, variables, constants, and functions) Operands: +, -, x, /, ( ) ariables: channel-specific data Constants: Number: 32 maximum Functions: SQR, LOG, EXP, ABS, DIF, DDIF, INT, DINT, SIN, COS, TAN, ASIN, ACOS, ATAN, EAN, DLY Waveform judgement Judgment area definition: Define the area by moving to the top, bottom, and both sides of the displayed waveform Judgement: GO (within area), NO GO (outside area) * 3 Excluding rubber feet and protuberances * 4 When 4 s are installed * 5 When 8 s are installed * 6 25 mm/s maximum when 24 or 32 channels are used

7 Plug-in lifier units (oltage input) easurement range Floating ground with unbalanced-load input (each channel is independent ) 50 m to 500/FS Sling speed: 4 µs max.; Resolution: 12 bits DC to 50 khz (+1/-3 db Typ.) 1.5, 5, 10, 30, 50, 500 Hz, 5 khz (ulti-input) easurement range Floating ground with unbalanced-load input (each channel is independent) oltage: 20 m to 500/FS, Thermocouples: K, J, T, R, E, B Sling speed: 10 µs max; Resolution: 16 bits DC to 20 khz (+1/-3 db Typ.) 1.5, 5, 10, 30, 50, 500 Hz, 5 khz H H (High-voltage/RS) easurement range ax. permissible Floating ground with unbalanced load input; each channel is independent; safety sockets for 2 terminals oltage: 20 to 1000 /FS; RS: 10 to 500 rms Sling speed: 10 µs; resolution: 16 bits DC to 2 khz (+1/-3 db typ) Between + and - terminals: 1000 DC (DC + AC p-p) Floating: 350 ACrms 1.5, 5, 10, 30, 50, 100, 500 Hz Z Z (Zero suppression) Floating ground with unbalanced load input; each channel is independent; safety sockets for 2 terminals easurement range 50 m to 200 /FS Suppression voltage 50 m to 2 range: ±10, 5 to 200 range: ±100 Sling speed: 10 µs; resolution: 16 bits DC to 10 khz (+1/-3 db typ) ax. permissible Between + and - terminals: 500 DC (30 DC for ranges less than 2 ) Floating: 250 ACrms 1.5, 5, 10, 30, 50, 500 Hz, 5 khz F/ F/ (Frequency-to-voltage conversion) ax. permissible Floating ground with unbalanced load input; each channel is independent; BNC jack 200 Hz to 40 khz Sling speed: 4 µs; resolution: 12 bits Between + and - terminals: 60 DC (DC + AC p-p) Floating: 30 ACrms 0.5, 30, 50, 100, 500 Hz, 1, 5 khz DC B DC B (DC strain) easurement range Bridge voltage ax. permissible Floating ground with unbalanced load input; each channel is independent; 7-pin 4-line round connectors 200 to x 10-6 strain/fs 2, 4 DC Sling speed: 10 µs; resolution: 16 bits DC to 20 khz (+1/-3 db typ) Differential input: 10 DC (DC + AC p-p) Common mode voltage: 10 ACrms 1.5, 10, 30, 100, 300 Hz, 1 khz FFT FFT (FFT measurement) easurement range ax. permissible Floating ground with unbalanced load input; each channel is independent; BNC jack 50 m to 50 /FS Sling speed: 1 µs: resolution: 12 bits DC to 250 khz (+1/-3 db typ) Between + and - terminals: 60 DC (DC + AC p-p) Floating: 30 ACrms 1.5, 5, 50, 500 Hz, 5, 50, 100 khz, anti-aliasing filter LO LO (Logic) 16 (4 per terminal x 4) Input voltage range 0 to +25 max (Single-ended ground) Threshold levels TTL (+1.4 ), COS (+2.5 ), Contact point (+5.0 ) Sling speed 1 µs maximum Note: The logic has its own dedicated slot, and cannot be replaced with another type of. Hard disk drive unit Data capture Sling speed File capacity Total data capacity File data search functions Set-up parameters, measurement data 20 µs to 5 s (8-channel model) ; sling speed depends on the type and number of s installed Up to 2 GB (1 Gword) Four 2 GB files (four 1-Gword files) Specified date and time, level, event, skip 512k memory emory expansion unit Expansion memory 256 kwords/ch; enables expansion up to 512 kwords/ch 3.5" OD 3.5" OD unit Installation Data capture Sling speed File capacity File data search functions GP- IB GP-IB interface unit Interface SCSI Interface SCSI interface unit Replaces the floppy disk drive unit Set-up parameters, measurement data 500 µs to 5 s (8-channel model) ; sling speed depends on the type and number of s installed 640 B maximum Specified date and time, level, event, skip Cannot be used concurrently with the SCSI interface SCSI-3 (wide) ; cannot be used concurrently with the GP-IB interface Sound Sound card unit oice capture function Captures voice data onto the hard disk oice replay function Replays voice data continuously from the specified position; measurement data is displayed from the position where replay was stopped icrophone input terminal One (400 to 500Ω) * The hard disk drive unit (B-385) must be installed before the sound card can be used DC DC drive unit Input voltage range Power consumption aximum chart speed 12 type: 10 to 16 DC 24 type: 21 to 32 DC (specify either 12 or 24 type) 8-ch and 16-ch models: maximum 190 A; 24-ch model: maximum 228 A; 32-ch model: maximum 264 A 25 mm/s

8 RS-232C REOTE DC-LINE 12 DC-POWER DC-FUSE! POWER AC-LINE / C105* Probe for Floating oltage Input Application Checking relay coil voltage or the operational timing of voltage ON/OFF from the control panel unit No. of inputs 4 channels (floating for each channel) Input range High, Low Input resistance High: approx. 100 kω Low: approx. 50 kω Detectable voltages High: 100 to 250 AC, 80 to 250 DC Low: 50 to 150 AC, 20 to 150 DC Non-detectable voltages High: 0 to 20 AC, 0 to 29 DC Low: 0 to 10 AC, 0 to 15 DC Response times High: within 1 ms, Low: within 3 ms aximum floating voltage 250 DC, ACp-p * Logic measurement required Cables and cords Name Part number Remarks Set of 2 input cables B pin banana-plug cables, bare tips Set of 4 input cables B pin banana-plug cables, bare tips Set of 8 input cables B pin banana-plug cables, bare tips Set of 16 input cables B pin banana-plug cables, bare tips BNC-BNC cable RIC m, BNC plug-bnc plug required BNC-banana clip cable RIC m BNC-alligator clip cable RIC m AC power cord RSC pin plugs with grounding conductor DC power cord RIC m cord with round 10 pin connectors Cl adapters, meters, and probes Name Part number Remarks Cl adapter C-102 easures AC 0 to 1200 A Digital cl meter C-111 easures AC/DC current (0 to 2000 A), AC/DC voltage (0 to 1000 ), resistance (0 to 4000 kω), frequency (10 to 4000 Hz), and temperature (-50 to +160 ) Temperature probe for cl meter RIC to +200 C; for use with C-111 Line separator C-108 x1, x10; for use with C-111 Logic IC cable RIC-07 To connect RIC 08/09 with logic Alligator-clip cable RIC-08 For use with logic IC-clip cable RIC-09 For use with logic Probe set RIC-10 One each of RIC-07, -08, -09 Floating voltage input probe C-105 For use with logic oltage fluctuation probe C-106 For use with logic Accessories C106* Probe for oltage Fluctuations Application Detecting of momentary voltage drops of industrial power lines and waveform recording of those drops No. of inputs 1 Input resistance 10 kω Input range 100 AC/120 AC Frequency range Both 50 Hz/60 Hz oltage fluctuation detection level ±10%/±20% Trigger output Ch 1: detected at +10%, +20% Ch 2: detected at - 10%, - 20% Detection method Full-wave rectification, peak value detection Response times Approx. 1 cycle of the input AC voltage ax. allowable 160 rms * Logic measurement required Other Name Part number Remarks Remote connector RCN pin connector jack BNC conversion plugs SA101-4P Banana to BNC, 4 per set Safety BNC adapter SA-102 For use with high-voltage BNC to banana conversion adapter Supplies Name Part number inimum sales unit Remarks Thermal roll paper PR231A 10 rolls 40 m/roll Thermal Z-fold paper PZ231A 5 packs 100 m/pack (for 100-m Z-fold chart unit) Thermal Z-fold paper PZ packs 20 m/pack (for 20-m Z-fold chart unit) Head cleaner set B kit Contains cleaning liquid and sheets Dimensional Diagram TRACE CONTRAST Tolerance: ±5 mm Unit: mm * B-331 C-105 C-106 RIC-08 RIC-09 RIC-10 RIC-07 RIC-110 C-108 C-102 SA-102 RCN-114 C ch model: One 8-channel unit is mounted under the main unit * 36-ch model: Two 8-channel units are mounted under the main unit Note: The above diagram includes several, but not all, user-specifiable add-on units RIC-140 RSC-110 To ensure correct and safe use of your recorder: Read your User's anual before using the recorder, and operate it correctly in accordance with the procedures described. To prevent malfunctions or electrical shock due to current leakage, ensure that the recorder has a good protective ground, and ensure that the supply voltage conforms to the recorder's power rating. Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners. Specifications are subject to change without notice Shinano-cho, Totsuka-ku, Yokohama , Japan Tel : +81 (045) Fax : +81 (045) info@graphteccorp.com Web : RWR SU Printed in Japan