Modular Point Source Array

Transcription

1 Modular Point Source Array CF/CFX101LA & CF/CFX15S MODULAR POINT SOURCE ARRAY LOUDSPEAKER SYSTEMS R ENKUS-H EINZ A UDIO O PERATIONS N ETWORK

2 CF15S INTRODUCING THE CF/CFX Modular Point Source Array Designed for power, portability and versatility, the CF/CFX101LA from Renkus- Heinz is the ideal solution for today s small and mid-sized venues, including auditoria, night clubs, theaters and houses of worship. With the flexibility to be flown, ground-stacked or pole-mounted, the CF/CFX101LA delivers the performance and pattern control of a line array, with the clarity of a point source system, in a compact, sleek and affordable design that s equally at home as a portable system or a permanent installation. Alone or combined with the CF/CFX15S subwoofer, the CF/CFX101LA can be flown, ground-stacked, or pole-mounted, or used as a center cluster to complement an existing left-right system, making it the perfect solution for a wide range of installed or portable sound needs. CF101LA HIGHER POWER DENSITY Up to four CF/CFX101LA cabinets can be arrayed to provide a 90 x 60 degree coverage pattern, delivering from 9 db to 12 db more output and tighter vertical pattern control than a conventional single cabinet. Traditional line arrays require two or three times as many cabinets to provide the same range of coverage. MODULAR POINT SOURCE WAVEGUIDE - TUNED CONIC DIVERTER When it comes to innovation, once again Renkus-Heinz leads the way. Our new Tuned Conic Diverter carefully manipulates the curvature of the wavefront within the horn so that it's curvature matches the curvature of the array. As sound leaves the compression driver, it's wavefront expansion is at first spherical matching the shape of the bounding side walls. As sound progresses through the horn, it's wavefront is progressively flatened as it passes through a Tuned Conic Diverter which slows the wavefronts expansion at the center relative to the sides, modifying it's curvature to match the shape of the cabinet. With the introduction of the CF/CFX Modular Point Source Array, we have created a modular point source system, fully conforming to the true array principle that is completely free of audible and measurable comb filtering. What you experience is the clarity of a single cabinet, with the power and coverage to satisfy everyone in the audience. Tuned Conic Diverter Page 2

3 DESIGNED FOR RUGGED DEPENDABILITY Heavy-duty birch ply cabinets, ultra-durable coatings and tough, reinforced hardware are designed to withstand the rigors of the road. MULTI-ANGLE POLE SOCKET All CF/CFX101LA cabinets come standard with an integral multi-angle pole socket allowing the cabinet to be supported on a standard 35mm loudspeaker stand, or on a sturdy pole attached to the subwoofer. This allows the full-range cabinet to be angled straight ahead, up or down as the situation demands for optimum coverage and performance. SAFE & SIMPLIFIED HARDWARE Simple, rugged, integral hardware allows for maximum versatility, maximum safety, and fast setup and teardown. CF/CFX101LA hardware has been designed to work either way up so left and right systems can be setup symmetrically without the need for mirror image cabinets. CF/CFX15S matched subwoofers employ the same simple yet sturdy hardware enabling the system to be flown beneath the subwoofer. QUALITY COMPONENTS Renkus-Heinz uses only the highest quality, lowest-tolerance components and hardware designed for peak performance. From the precisiontuned crossover network, to rugged dependable hardware, CF/CFX101LA delivers. Page 3

4 CF/CFX101LA The CF/CFX101LA Point Array Module has been designed with your requirements for flexibility in mind. Each cabinet can be pole mounted, flown from a frame or suspended using M10 eyebolts. Suited equally to fixed installation or portable applications each array module offers a consistent 90 degree horizontal and tight 15 degree vertical coverage. Neodymium magnets on the single 10 Low Frequency woofer and dual 1 High Frequency compression drivers provide the ideal balance of power and portability, while the revolutionary performance of the Tuned Conic Diverter waveguide ensures the smoothest possible transition between cabinets. CF/CFX Point Array is a true point source arrayable system offering the benefits of both line and point source arrays. CF/CFX101LA Outstanding Performance Dual 1 HF Drivers and High Power 10 Woofer Neodymium Magnet Structures Great Versatility Exclusive Tuned Conic Diverter Tight Pattern Control Reliable, Easy-To-Use Hardware Flexible Input Configurations Switchable Biamp / Passive CFX101LA-8 Connector Plate HIGH FREQUENCY ARRAY CONTROL As the CF/CFX101LA can be used in many and varied combinations simple High Frequency level control switches are provided on the back of each cabinet. The user can select between a Flat response for a single cabinet, or boost the HF by +6dB or +9dB depending on how many cabinets are in the array and how much throw is required. Page 4

5 CF/CFX15S Subwoofer CF15S and CFX15S-8 subwoofers were developed as companion pieces to the CF/CFX series point source array modules. They provide the high impact sub bass energy needed in many venues and also serve as a mounting platform for both stacked and flown arrays. Along with being a dedicated companion subwoofer to the CF/CFX101LA Point Source Array, it can be used to create directional cardiod and steerable arrays as well. Using RHAON, these arrays can then be "steered" to put sub frequencies where they are needed, avoiding floor, ceiling, and rear wall reflections for maximum clarity and impact. CF/CFX15S Powerful 15 Subwoofers Neodymium Magnet Structures Outstanding Versatility Neodymium Magnet Structure Woofer High Performance, High Power Woofers Flexible Input Configurations RHAON Ready Ground Stack with dual array modules & single subwoofer Floor System with single array module & subwoofer Floor System with dual array modules & dual subwoofers Page 5

6 EASE FOCUS EASE Focus allows users and system designers to quickly and accurately predict the response of the array. Simply define the audience areas and you can easily place the array, add or remove cabinets and adjust its height, location and angle until you get the desired results in the simulation. RENKUS-HEINZ AUDIO OPERATIONS NETWORK Passive, powered or networked, you can choose the system configuration that meets your needs at any time. Whenever you are ready for Ethernet audio networking, your CF loudspeakers are too. At the factory or in the field, the CFX passive connector plate can be easily replaced by one of five PF Series intelligent Class D digital amplifiers. A Windows GUI empowers RHAON users to connect each Renkus-Heinz powered loudspeaker to a CobraNet network, control 8 parametric EQ filters, up to 340 ms of delay and dynamics processing via onboard DSP, and supervise both the amplifier and drivers. Connect Control Beams / Presets Supervise SELF POWERED & EXTERNALLY POWERED The CF/CFX101LA Series is available as a passive loudspeaker for use with external amplification, or with Renkus-Heinz s highly acclaimed PF Series Intelligent Digital Amplification. The PF Series delivers audiophile-quality performance, ultra-low distortion and unparalleled efficiency in a sleek, lightweight design. Page 6

7 Sensitivity CF101LA-5, -5R & -52R: CFX101LA-8: Max SPL: Dispersion: Freq. Response: HF Drivers: LF Driver: Crossover: Enclosure: Power CF101LA-5, -5R & -52R: CFX101LA-8: Controls: Connectors CFX101LA-8: Finish: Hardware: Associated Hardware: Dimensions: Weight CF101LA-5 & -5R: CF101LA-52R: CFX101LA-8: CF/CFX101LA 1.0 V for rated power output 96 db (1W/1m) 126 db peak 90 O Horizontal, 15 O Vertical 60 Hz to 20 khz Two 1 SSDCDXI HF Neodymium drivers; 75 W 8 Ohms, 150 W pgm each CF101LA: 10 Neodymium woofer, model SSL10-8, 250 W 8 Ohms, 500 W pgm CFX101LA-8: 10 Neodymium woofer, model SSL10-10, 250 W 8 Ohms, 500 W pgm 1.0 khz Multi-ply hardwood, perforated metal grille 115 V AC or 230 V AC, 50/60 Hz 500 W pgm at 8 Ohms Array Balancing Neutrik 4-pin Speakon style connectors, screw terminals Black or white; custom colors available Weather resistant treatment available Four Metric M10 attachment points Multi-angle pole socket RHANG101LA Flybar POLE-CF101 Mounting Pole 13" H x 23 3/4" W x 15" D (33 cm x 60.3 cm x 38.1cm) 56 Lbs. (25.4 Kg) net 58 Lbs (26.3 Kg) net 54 Lbs (24.5 Kg) net PF1-500 DIGITAL AMPLIFIER Sensitivity CFX15S-8 : Max SPL CFX15S-8: Freq. Resp: LF Driver: Enclosure: Finish: Power CFX15S-8: Connectors CFX15S-8: Hardware: Dimensions: Weight CFX15S-8: CF/CFX15S 1.0 V for RPO 97 db (1W/1m) 127 db peak 129 db peak 40 Hz to 120 Hz CF15S: 15" woofer with Neodymium magnet, model SSL15-20; 400 W 4 Ohms, 800 W pgm CFX15S-8: 15" woofer with Neodymium magnet, model SSL15-17; 400 W 8 Ohms, 800 W pgm 13-ply hardwood, perforated metal grille Black or white; custom colors available Weather resistant treatment available 115 V AC or 230V AC 800 W pgm at 8 Ohms See amplifier specifications Screw terminals & looping 4-pin Neutrik Speakon style connectors 8-point univ. mtg. hdw. (Metric M10 threads) Threaded pole socket, Integral flying hardware Optional - heavy duty wheels 19" H x 23 1/4 W x 22 1/2" D (48.3 cm x 59 cm x 56.5 cm) 117 Lbs (53.4 Kg) net 112 Lbs (51 Kg) net PF1-500R RHAON EMPOWERED AMPLIFIERS The PF1-500R is identical to the PF1-500 except for the addition of the RHAON Network Interface; additional capabilities include: Power: 500 W 4 Ohms Freq. Resp: +0.0, -.5 db, 20 Hz to 20 khz THD Distortion: < 0.02% typical Hum & Noise: <100 db (A weighted) Damping: >100 Input: 10K Ohm balanced differential Sensitivity: 1.0 V for RPO CMR: 74 db Controls: Gain (screwdriver adjustable) Power Connector: IEC Power connector Input: Looping XLR; female in, male out (pin 1 chassis, pin 2 +, pin 3 -) Power: Switchable, 115 or 230 V AC, 50/60 Hz V, V Idle current: 400 V; V Max inrush current: 1 A Inputs: Digital Format: Protection: CobraNet: Dual RJ45 connectors; accept Cat 5 copper cable. AES/EBU: Phoenix connectors; Analog: Phoenix connectors 16, 20 or 24 bit PCM; 48 or 96 khz sample rate; selectable Network Latency. Soft & Peak limiting, Excursion Control & Thermal Regulation PF2-500R RHAON EMPOWERED AMPLIFIERS The PF2-500R is a RHAON empowered 500/200 W RMS bi-amplifier. It is identical to the PF1-500R except for also having a 200 Watt HF amplifier and associated electronic crossover. Power: V, V Idle current: V; V. Max inrush current: 1 A Note: All analog inputs and outputs comply with AES Standard on interconnecting, grounding and shielding. Page 7

8 Renkus-Heinz, Inc. Headquarters, Foothill Ranch, California, USA Working together, there s no problem we can t solve, no schedule we can t meet, no project we can t take to a higher level of excellence, from the White House to the Olympic SuperDome, from corner churches to major metropolitan concert halls. Much as we love technology, our greatest satisfaction comes through helping people communicate through music, dance, theater, or the power of a new idea brilliantly expressed. When we make those kinds of connections, there s nothing more exciting or more powerful. Here are some of the unique Renkus-Heinz technologies we use in our loudspeaker systems: Patented CoEntrant Topology integrates midrange and high frequency drivers into wideband point sources. Complex Conic Topology, the first new approach to horn design in decades, has proven its superior performance worldwide. TRAP (TRue Array Principle) design aligns acoustic centers so loudspeaker clusters produce coherent output. Reference Point Array engineering optimizes the entire signal chain from line level to listener for unprecedented performance. Renkus-Heinz, Inc., Cook Street, Foothill Ranch, CA , USA Tel: Fax: sales@renkus-heinz.com RH690 November 2011