XLTE SERIES LOUDSPEAKER SYSTEMS

Transcription

1 XLTE SERIES LOUDSPEAKER SYSTEMS FULL-RANGE SYSTEMS Trapezoidal Baltic Birch Enclosure, Black Paint Finish, PowerSense TM DDP, Biampable, Stackable, Neutrik NL4 and 1/4" Connectors Load-Rated 3/8"-16 Threaded Inserts for Flying and Permanent Mounting, Heavy-Duty Rubber Feet Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ XLT42E 2-way, 70 Hz - 18 khz, 80 H x 35 V 53.5 lbs $ $ $ LF 1 x 12", HF 1 x 1" compression driver 24.3 kg 200W RMS, 500W PGM, 8 Ohm, 1-3/8"/35 mm pole socket (Bi-amp) HF 50W/125W, 8 Ohm, LF 200W/ 500W, 8 Ohm, Sensitivity: 97 db SPL, 57 lbs (Passive) 420 to 8 Ohms 25.9 kg 24.3"H x 14.6"W(front), 9.2"W(rear), x 14.75" D XLT43E 2-way, 50 Hz - 18 khz, 80 H x 35 V 68.5 lbs $ $ $ LF 1 x 15", HF 1 x 1" compression driver 31.1 kg 200W RMS, 500W PGM, 8 Ohm, 1-3/8"/35 mm pole socket (Bi-amp) HF 50W/125W, 8 Ohm, LF 200W/ 500W, 8 Ohm, Sensitivity: 98 db SPL, 75 lbs (Passive) 420 to 8 Ohms 34 kg 26.9"H x 19.75"W(front), 13"W(rear), x 17.9" D XLT46E 3-way, 50 Hz - 18 khz, 65 H x 30 V rotatable mid- 85 lbs $ 1, $ $ high horn, LF 1 x 15", MF 1 x 6.5", HF 1 x 1" 38.6 kg compression driver, 200W RMS, 500W PGM, 4 Ohm (Bi-amp) HF 80W/200W, 8 Ohm, LF 200W/ 500W, 4 Ohm, Sensitivity: 97 db SPL, 95 lbs (Passive) 420 to 4 Ohms 43.1 kg 33.9"H x 19.75"W(front), 13"W(rear), x 17.9" D XLT47E 2-way, 50 Hz - 18 khz, 80 H x 35 V 95 lbs $ 1, $ $ LF 2 x 15", HF 1 x 1" compression driver 43.1 kg 400W RMS, 1000W PGM, 4 Ohm (Bi-amp) HF 50W/125W, 8 Ohm, LF 400W/ 1000W, 4 Ohm, Sensitivity: 98 db SPL, 105 lbs (Passive) 830 to 4 Ohms 47.4 kg 33.9"H x 19.75"W(front), 13"W(rear), x 17.9" D FULL-RANGE MONITOR SYSTEMS (used as a monitor or front-of-house loudspeaker) Baltic Birch Enclosure, Black Paint Finish, PowerSense TM DDP, Biampable, Neutrik NL4 and 1/4" Connectors, Heavy-Duty Rubber Feet Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ XLT41E-94B 2-way multi-angle enclosure, 70 Hz - 18 khz, 80 x lbs $ $ $ LF 1 x 12", HF 1 x 1" compression driver, 200W RMS, 22.5 kg 500W PGM, 8 Ohm, 1-3/8"/35 mm pole socket (Bi-amp) HF 50W/125W, 8 Ohm, LF 200W/ 500W, 8 Ohm, Sensitivity: 97 db SPL, (Passive) 420 to 8 Ohms 14.4"H x 23.9"W(front), x 15.3" D XLT41E-94W White painted version of XLT41E-94B with white cloth XLT41E-94U Unpainted, requires additional finishing, brown cloth 51 lbs 23.1 kg XLT41E-64B Same as XLT41E-94B except with 50 H x 35 V horn XLT41E-64W XLT41E-64U White painted version of XLT41E-64B with white cloth Unpainted, requires additional finishing, brown cloth Performance data available 24 hours per day at Page 1 of 15

2 XLTE SERIES LOUDSPEAKER SYSTEMS FULL-RANGE MONITOR SYSTEMS (used as a monitor or front-of-house loudspeaker) Baltic Birch Enclosure, Black Paint Finish, PowerSense TM DDP, Biampable, Neutrik and 1/4" Connectors Heavy-Duty Rubber Feet Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ XLT48E-94B 2- way Stage Monitor, 50 Hz - 18 khz, 80 H x 35 V 60 lbs $ $ $ LF 1 x 15, HF 1 x 1 compression driver 27.2 kg 200W RMS, 500W PGM, 8 Ohm, threaded inserts for stand socket and permanent mounting (Bi-amp) HF 50W/125W, 8 Ohm, LF 200W/ 500W, 8 Ohm, Sensitivity: 98 db SPL, (Passive) 420 to 8 Ohms 19.3"H x 19.5"W(front), x 30.9" D XLT48E-94W White painted version of XLT48E-94B with white cloth XLT48E-94U Unpainted, requires additional finishing, brown cloth 68 lbs 30.9 kg XLT48E-64B XLT48E-64W Same as XLT48E-94B except with 50 H x 35 V horn Sensitivity: 99dB SPL White painted version of XLT48E-64B with white cloth XLT48E-64U Unpainted, requires additional finishing, brown cloth SUBWOOFER SYSTEMS Baltic Birch Enclosure, Black Paint Finish, PowerSense TM DDP, Stackable, Neutrik and 1/4" Connectors, 150 Hz High Pass Output Load-Rated 3/8-16" Rigging Points for Flying and Permanent Mounting, Heavy-Duty Rubber Feet Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ XLT51E Vented subwoofer, 40 Hz Hz 66.5 lbs $ $ $ x 15", 150W RMS, 375W PGM, 8 Ohm, 1-3/8"/35mm 30.2 kg pole socket. Use with XLT41E, XLT42E, and XLT43E. Sensitivity: 95 db SPL, 300 to 8 Ohms 73 lbs 26.9"H x 19.5"W(front), x 17.9" D 33.1 kg XLT55E Vented subwoofer, 40 Hz Hz 89 lbs $ 1, $ $ x 15", 300W RMS, 750W PGM, 4 Ohm 40.4 kg Black paint. Use with any full-range XLTE loudspeaker system (separate amp recommended for XLT46E and XLT47E). Sensitivity: 95 db SPL, 100 lbs 300 to 8 Ohms 45.4 kg 26.9"H x 19.5"W(front), x 17.9" D Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ SB5 * 5 ft. / 1.5 m long x 1-3/8" / 35 mm o.d. steel mounting 6 lbs $ $ $ pole, black finish for mounting full-range on subwoofer 2.7 kg Use with XLT41E, XLT42E, XLT43E, and XLT51E. 3/8EYBLTKIT* Eyebolt Kit for suspending/rigging 0.8 lbs $ $ $ contains four 1" / 25 mm i.d., 3/8-16, forged eyebolts 0.4 kg and steel cup washers, black zinc plated STRAPKIT * 3 steel straps with a series of 3/8" / 10 mm diameter 3 lbs $ $ $ holes for attaching rigging to threaded inserts. 1.4 kg Use with any XLTE. Performance data available 24 hours per day at Page 2 of 15

3 XLTPRO (XP) SERIES LOUDSPEAKER SYSTEMS SOUND REINFORCEMENT / MUSICIAN / DJ FGM LOUDSPEAKERS FULL-RANGE SYSTEMS: Trapezoidal 7-Ply Enclosure, Improved IntelliSense TM and PowerMeter TM LED Indicators, Bi-amp Operation, HF Boost and Cut, Stackable, Locking and 1/4" Connectors, with Black Carpet Finish, Protective Corners, Threaded Inserts for Permanent Mounting. Model Description Retail Price Price Quantity 1-5 Quantity 6+ XP525 3-way, 50 Hz - 18 khz, 90 H x 40 V 80 lbs $ $ $ $ LF 2 x 15", MF 1x 6.5", HF 1 x 1" non-metallic 36.3 kg RMS/PGM: (Passive) 600W/1500W, 4 Ohm (Bi-amp) HF 80W/200W, 4 Ohm, LF 600W/ 1500W, 4 Ohm, Sensitivity: 98 db SPL, 90 lbs (Passive) 1200 to 4 Ohms 40.8 kg 42"H x 20.3"W(front), 13.7"W(rear) x 18.2" D XP530 3-way, 50 Hz - 18 khz, 65 H x 30 V rotatable $ $ $ $ HF/MFD, LF 1 x 15", MF 1 x 6.5", HF 1 x 1" 65 lbs non-metallic,rms/pgm:(passive) 400W/1000W, 29.5 kg 4 Ohm, (Bi-amp):HF 80W/200W,4 Ohm, LF 400W/1000W, 4 Ohm, Sensitivity: 101dB (Passive) 800 to 4 Ohms 75.5 lbs. 33.9"H x 20.3"W(front), 13.7"W(rear) x 18"D 34.2 kg XP500 2-way, 50 Hz - 18 khz, 90 H x 40 V $ $ $ $ LF 1 x 15", HF 1 x 1" non-metallic 50 lbs 1-3/8" / 35 mm pole socket 22.7 kg RMS/PGM: (Passive) 400W/1000W, 4 Ohm (Bi-amp) HF 50W/125W, 4 Ohm, LF 400W/ 1000W, 4 Ohm, Sensitivity: 98 db (Passive) 800 to 58 lbs 4 Ohms 26.3 kg 27"H x 20"W(front), 13.7"W(rear) x 18"D FULL-RANGE MONITOR SYSTEMS: Improved IntelliSense TM and PowerMeter TM LED Indicators, Bi-amp Operation, HF Boost and Cut, Locking and 1/4" Connectors, 7-Ply Enclosure with Black Carpet Finish, Protective Corners, Threaded inserts for Permanent Mounting. Model Description Retail Price Price Quantity 1-5 Quantity 6+ XP way Stage Monitor, 50 Hz - 18 khz, 44 lbs $ $ $ $ H x 40 V, LF 1 x 15", HF 1 x 1 20 kg Non-Metallic, RMS/PGM: (Passive) 400W/ 1000W, 4 Ohm, (Bi-amp) HF 50W/125W, 4 Ohm, LF 400W/1000W, 4 Ohm Sensitivity: 99 db SPL 52 lbs Threaded inserts for permanent mounting kg (Passive) 800 to 4 Ohms 27"H x 20"W(front), 20"W(rear) x 16.5"D XP502 2-way multi-angle enclosure, 70 Hz - 18 khz, $ $ $ $ x 40, LF 1 x 12", HF 1 x 1" Non-Metallic, 37 lbs Rotatable HF Horn, 1-3/8"/35mm pole socket 16.8 kg RMS/PGM: (Passive) 400W RMS, 1000W PGM, 8 Ohm, (Bi-amp) HF 50W/125W, 4 Ohm, LF 400W/1000W, 8 Ohm, Sensitivity: 98 db (Passive) 800 to 43 lbs 8 Ohms, 15" H x 24"W(front, 24"W (rear) x 15.5" D 19.5 kg Performance data available 24 hours per day at Page 3 of 15

4 XLTPRO (XP) SERIES LOUDSPEAKER SYSTEMS SUBWOOFER SYSTEMS : Improved IntelliSense TM and PowerMeter TM LED indicators, Full-Range Output, Stackable, Locking and 1/4" Connectors, 7-Ply enclosure with Black Carpet Finish and Protective Corners. Model Description Retail Price Price Quantity 1-5 Quantity 6+ XP509 Vented subwoofer, 40 Hz Hz 70 lbs $ $ $ $ x 15", 400W RMS, 1000W PGM, 4 Ohm 31.8 kg PowerMeter TM LEDs. Use with any full-range XLT PRO system. 33.5" mounting pole included. Sensitivity: 96 db SPL Threaded Inserts for Permanent Mounting (separate amp recommended for XP525 and 80.5 lbs XP530) 36.5 kg 800 to 4 Ohms 33.9"H x 20.3"W(front), 13.7"W(rear) x 18.2"D Model Description Retail Price Price Quantity 1-5 Quantity 6+ XLT415 Horn loaded subwoofer, 40 Hz - 250Hz 181 lbs $ 1, $ 1, $ $ x 15", 600W RMS, 1500W PGM, 4 Ohm 82.1 kg Caster mounting points. Sensitivity: 101dB SPL Use with any full-range XLT PRO system. Requires electronic crossover and separate amplifier. Recommended Amplfier: 1200 to 4 Ohms 198 lbs 33.8"H x 27"W x 43"D 89.8 kg Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ STRAPKIT* 3 steel straps with a series of 3/8" / 10 mm 3 lbs $ $ $ diameter holes for attaching rigging to threaded 1.4 kg inserts. Use with any XP except XLT415. WB1* 2 steel plate-brackets for wall/ceiling mounting 5 lbs $ $ $ (max load = 95 lbs./ 43.1 kg) 2.3 kg Use with any XP except XP509 and XLT415. CASTERS4 * Kit of 4 heavy-duty, 4" casters for XLT415 9 lbs $ $ $ kg SPKON* Package of 4 inline NL4FC Speakon 1 lb $ $ $ connectors kg Performance data available 24 hours per day at Page 4 of 15

5 TANDEM DRIVE SERIES LOUDSPEAKER SYSTEMS COMPACT DJ / CLUB / PLAYBACK LOUDSPEAKERS FULL-RANGE SYSTEMS - Rectangular 7 Ply Enclosure, Improved IntelliSense TM and PowerMeter TM LED Indicators, Full Range or Bi-amp Operation, HF Boost and Cut, Locking and 1/4" Connectors, Cool-Coil TM LFs, UC1 Compression Driver, Black TufCoat TM Finish, ERGO-GRIP Handles, Threaded Inserts for Permanent Mounting. Model Description Retail Price Price Quantity 1-5 Quantity 6+ TD way, 60 Hz - 16 khz, 90 H x 40 V 49 lbs $ $ $ $ LF 2 x 12", HF 1 x non-metallic UC1 22 kg 300W RMS, 750W PGM, 4 Ohm Sensitivity: 97dB SPL, (Full-Range) 600 to 4 Ohms (Bi-amp LF) 600 to 4 Ohms (Bi-amp HF) 100 to 4 Ohms 60 lbs 25"H x 14"W x 18"D 27.2 kg TD way, 50 Hz - 16 khz, 90 H x 40 V $ $ $ $ LF 2 x 15", HF 1 x non-metallic UC1 71 lbs 400W RMS, 1000W PGM, 4 Ohm 32.2 kg Sensitivity: 97dB SPL, (Full-Range) 800 to 4 Ohms (Bi-amp LF) 800 to 4 Ohms (Bi-amp HF) 100 to 4 Ohms 80 lbs 27"H x 17"W x 20"D 36.3 kg SUBWOOFER SYSTEMS - Improved IntelliSense TM, Full-Range Output, Locking and 1/4" Connectors, Cool-Coil TM LFs, TufCoat Finish TM, ERGO-GRIP Handles, Threaded Inserts for Permanent Mounting on the TD2115, 150Hz High Pass Output. Model Description Retail Price Price Quantity 1-5 Quantity 6+ TD2115 Ported subwoofer, 45Hz Hz 92 lbs $ $ $ $ x 15", 400W RMS, 1000W PGM, 4 Ohm 41.7 kg Use with any full-range TD loudspeaker system. Sensitivity: 95 db SPL 800 to 4 Ohms 33"H x 17"W x 22"D 105 lbs 47.6 kg TD2118 Ported subwoofer, 40 Hz - 160Hz 144 lbs $ 1, $ $ $ x 18", 600W RMS, 1500W PGM, 4 Ohm 65.3 kg Caster mounting points. Sensitivity: 99 db SPL Use with any full-range TD loudspeaker system to 4 Ohms 25"H x 40"W x 24"D 160 lbs 72.6 kg Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ SB5* 5 ft./1.5m long x 1-3/8"/35mm o.d. steel mounting 6 lbs $ $ $ pole, black finish for mounting Tandem full-range 2.7 kg on TD2118 subwoofer MP33* 33.5 inch long mounting pole, black finish for 5 lbs $ $ $ mounting Tandem full-range on TD2115 subwoofer 2.3 kg CASTERS4* Kit of 4 heavy-duty, 4" casters for TD lbs $ $ $ kg STRAPKIT* 3 steel straps with a series of 3/8" / 10 mm 3 lbs $ $ $ diameter holes for attaching rigging to threaded 1.4 kg inserts. Use with all TD except TD2118. Performance data available 24 hours per day at Page 5 of 15

6 MVP SERIES LOUDSPEAKER SYSTEMS DJ / SOUND REINFORCEMENT / MUSICIAN LOUDSPEAKERS FULL-RANGE SYSTEMS Trapezoidal Enclosure with Black Carpet Finish, Thermal Link TM Driver Protection System, Stackable, Flyable with T-Nut Mounting Points, Perforated Steel Grille, Two 1/4" and Locking Connectors, Signal Present Indicator LED, 1-3/8" (35mm) Mounting Pole Socket. Drivers and crossovers are warranted against any failure for two years from the date of purchase. Five year transferable warranty. Model Description Retail Price Price Quantity 1-5 Quantity 6+ MVP25 2-way, 70 Hz - 16 khz, 90 H x 40 V 34 lbs $ $ $ $ LF 1 x 12", HF 1 x 20mm Non-metallic, 15.5 kg Ferrofluid-cooled, 150W RMS, 375W PGM, 8 Ohm Sensitivity: 94dB SPL 1W/1m 300W - 8 Ohms 38 lbs 17.2 kg MVP35 2-way, 65 Hz - 16 khz, 90 H x 40 V 46 lbs $ $ $ $ LF 1 x 15", HF 1 x 20mm Non-metallic, 21 kg Ferrofluid-cooled, 200W RMS, 500W PGM, 8 Ohm Sensitivity: 95dB SPL 1W/1m 400W - 8 Ohms 51 lbs 23.1 kg MVP36 2-way, 60 Hz - 17 khz, 90 o H x 40 o V 60 lbs $ $ $ $ Cast Frame LF 1 x 15", Large Format HF 27 kg 1 x 20 mm non-metallic, Ferrofluid-cooled, 200W RMS, 500W PGM, 8 Ohm Sensitivity: 97dB SPL 1W/1m 66 lbs 400W - 8 Ohms 30 kg MVP37 2-way, 45 Hz - 17 khz, 90 o H x 40 o V 86 lbs $ $ $ $ Cast Frame LF 2 x 15", Large Format HF 39 kg 1 x 20mm non-metallic, Ferrofluid-cooled, 400W RMS, 1000W PGM, 4 Ohm Sensitivity: 99dB SPL 1W/1m 97 lbs 800W - 4 Ohms 44 kg Performance data available 24 hours per day at Page 6 of 15

7 MVP SERIES LOUDSPEAKER SYSTEMS MONITOR SYSTEMS Black Carpet Finish, Thermal-Link TM Driver Protection System, Signal Present Indicator LED, Perforated Steel Grille, Two 1/4" and Locking Connectors, Drivers and crossovers are warranted against any failure for two years from the date of purchase. Five year transferable warranty. Model Description Retail Price Price Quantity 1-5 Quantity 6+ MVP28 2-way Stage Monitor, 70 Hz - 16 khz, 30 lbs $ $ $ $ o H x 40 o V, LF 1 x 12", HF 1 x 20mm Non kg metallic, Ferrofluid-cooled, 150W RMS, 375W PGM 8 Ohms, Sensitivity: 94 db SPL 1W/1m 300W - 8 Ohms 34 lbs 15.5 kg MVP38 2-way Stage Monitor, 70 Hz - 16 khz, 41 lbs $ $ $ $ o H x 40 o V, LF 1 x 15", HF 1 x 20mm Non kg metallic, Ferrofluid-cooled, 200W RMS, 500W PGM, 8 Ohm, Sensitivity: 94dB SPL 1W/1m 400W - 8 Ohms 45 lbs 20.5 kg SUBWOOFER SYSTEMS Black Carpet Finish, Perforated Steel Grille, Two 1/4" and Locking Connectors, Built-In High Pass Filter, 1-3/8" (35mm) Mounting Pole Socket constructed mid level through the cabinet. Drivers and crossovers are warranted against any failure for two years from the date of purchase. Five year transferable warranty. Model Description Retail Price Price Quantity 1-5 Quantity 6+ MVP40 Subwoofer, Full-Range Output! 40 Hz Hz, 89 lbs $ $ $ $ x 18", 300W RMS, 750W PGM, 8 Ohms 40.5 kg Use with any full-range MVP Sensitivity: 98dB SPL 1W/1m 600W - 8 Ohms 95 lbs Mounting pole is included kg Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ STRAPKIT * 3 steel straps with a series of 3/8" / 10 mm 3 lbs $ $ $ diameter holes for attaching rigging to threaded 1.4 kg inserts. Use with MVP25, 35 and 36. WB1* 2 steel plate-brackets for wall/ceiling mounting 5 lbs $ $ $ (max load = 95 lbs./ 43.1 kg) 2.3 kg Use with any MVP except MVP40. SPKON* Package of 4 inline NL4FC Speakon 1 lb $ $ $ connectors kg Performance data available 24 hours per day at Page 7 of 15

8 DnD SERIES LOUDSPEAKER SYSTEMS DJ / MUSICIAN / SOUND REINFORCEMENT LOUDSPEAKERS FULL-RANGE SYSTEMS - Black Carpeted Enclosure DnD Driver Protection System, Two 1/4" Jacks and One Locking Connector (NL4 type), Steel Grille, Black Carpet Finish, 1-3/8"Metal Mounting Pole Socket Drivers and crossovers are warranted against any failure for two years from the date of purchase. Five year transferable warranty. Model Description Retail Price Price Quantity 1-5 Quantity 6+ DnD12 2-way, 50 Hz - 16 khz, 90 H x 40 V 28 lbs $ $ $ $ LF 1 x 12", HF 2 x 1" 12.7 kg 150W RMS, 400W PGM, 8 Ohm Sensitivity: 97dB SPL 1W/1m 330W - 8 Ohms 32 lbs 14.5 kg DnD15 2-way, 40 Hz - 16 khz, 90 H x 40 V 44 lbs $ $ $ $ LF 1 x 15", HF 2 x 1" 19.9 kg 150W RMS, 400W PGM, 8 Ohm Sensitivity: 98dB SPL 1W/1m 330W - 8 Ohms 53 lbs 24 kg Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ SB5* 5 ft./1.5m long x 1-3/8"/35mm o.d. steel mounting 6 lbs $48.00 $ $ pole, black finish for DND mounting on XP, MVP or Tandem 2.7 kg subwoofer STRAPKIT* 3 steel straps with a series of 3/8" (10 mm) 3 lbs $ $ $ diameter holes for attaching rigging to threaded 1.4 kg inserts. WB1* 2 steel plate-brackets for wall/ceiling mounting 5 lbs $ $ $ (max load = 95 lbs./ 43.1 kg) 2.3 kg Use with any DND product. SPKON* Package of 4 inline NL4FC Speakon 1 lb $ $ $ connectors kg Performance data available 24 hours per day at Page 8 of 15

9 SOLUTIONS SERIES LOUDSPEAKER SYSTEMS HIGH OUTPUT SOUND REINFORCEMENT LOUDSPEAKERS SLS FULL-RANGE HORN LOADED SYSTEMS Trapezoidal Baltic Birch Enclosure, Wavefront Coherent, Biampable, PowerSense DDP, Neutrik and Dual Banana Connectors, with 8 x 3/8"-16 Load-Rated Rigging Points, Black, White and Unpainted Version. Requires Electronic System Controller. NOTE: For all unpainted cabinets, please contact factory for current lead time. Suggested Model Description Retail Price Dealer Price SLS915 2-way, 95 Hz 18 khz, 80 H x 50 V 53 lbs $ 1, $ LF 2 x 6.5", HF 1 x 1" VHF100, 120W RMS, 300W 24 kg PGM, 8 Ohm Provisions for bracket and pole socket SLS915WHT SLS915U White painted version of SLS915, no handles SLS920 3-way, 95 Hz 18 khz, 65 H x 50 V 87 lbs $ 1, $ 1, LF 2 x 8, MF 1 x 2" M200, HF 1 x 1" VHF kg 200W RMS, 500W PGM, 8 Ohm Provisions for bracket and pole socket SLS920WHT SLS920U SLS920H SLS920HWHT SLS920HU White painted version of SLS920, no handles Same as SLS920 with HF horn rotated 90 so HF pattern is 65 H x 50 V when system is horizontally mounted White painted version of SLS920H, no handles SLS918 3-way, 55 Hz 18 khz, 80 H x 50 V 116 lbs $ 1, $ 1, LF 1 x 12, MF 2 x 6.5", HF 1 x 1" VHF kg 200W RMS, 500W PGM, 4 Ohm Provisions for bracket and pole socket SLS918WHT SLS918U White painted version of SLS918, no handles SLS960 3-way, 75 Hz 18 khz, 65 H x 50 V lbs $ 2, $ 1, LF 2 x 10, MF 1 x 2" M200, HF 1 x 1" VHF kg 400W RMS, 1000W PGM, 8 Ohm SLS960WHT SLS960U White painted version of SLS960, no handles SLS980 3-way, 50 Hz 18 khz, 65 H x 45 V 290 lbs $ 4, $ 2, LF 2 x 15, MF 1 x 2" M200, HF 1 x 1" VHF kg 400W RMS, 1000W PGM, 8 Ohm SLS980WHT SLS980U White painted version of SLS980, no handles Performance data available 24 hours per day at Page 9 of 15

10 SOLUTIONS SERIES LOUDSPEAKER SYSTEMS SBS VENTED SUBWOOFERS Baltic Birch Enclosure with 8 x 3/8-16 Load-Rated Rigging Points, Neutrik and Dual Banana Connectors, Cast Frame, Triple Spider Drivers, Black, White Paint and Unfinished. Requires Electronic System Controller. Suggested Model Description Retail Price Dealer Price SBS12 Subwoofer, 45 Hz Hz 72 lbs $ 1, $ x 12", 200W RMS, 500W PGM, 8 Ohm 32.7 kg Use with SLS920 / SLS915 Provisions for bracket and pole socket SBS12WHT SBS12U White painted version of SBS12, no handles SBS22 Subwoofer, 35 Hz Hz 113 lbs $ 1, $ x 12", 400W RMS, 1000W PGM, 4 Ohm 51.3 kg Use with SLS960 / SLS920 / SLS918 / SLS915 SBS22WHT SBS22U White painted version of SBS22, no handles SBS25 Subwoofer, 35 Hz Hz 178 lbs $ 1, $ 1, x 15", 400W RMS, 1000W PGM, 4 Ohm 80.7 kg 1-3/8" / 25 mm pole socket Use with SLS960 / SLS920 / SLS918 SBS25WHT SBS25U White painted version of SBS25, no handles SBS45 Subwoofer, 27 Hz Hz 250 lbs $ 2, $ 1, x 15", 800W RMS, 2000W PGM, 8 Ohm kg Use with SLS980 / SLS960 / SLS920 SBS45WHT SBS45U White painted version of SBS45, no handles NOTE: Standard configuration for SLS and SBS is Black with handles and White without handles. Black without handles and White with handles are available as Special Order items Suggested Model Description Retail Price Dealer Price SB5* 5 ft. / 1.5 m long x 1-3/8" / 35 mm o.d. steel mounting 6 lbs $ $ pole, black finish for mounting SLS920, SLS918 or 2.7 kg SLS915 on SBS25 (external stand socket required for SLS) 3/8EYBLTKIT* Eyebolt Kit for suspending/rigging, 0.8 lbs $ $ contains four 1" / 25 mm i.d., 3/8"-16, forged eyebolts 0.4 kg and steel cup washers, black zinc plated SPKON* Package of 4 inline NL4FC Speakon connectors 1 lb. $ $ kg Performance data available 24 hours per day at Page 10 of 15

11 SOLUTIONS SERIES LOUDSPEAKER SYSTEMS ELECTRONIC SYSTEM CONTROLLERS Signal processing and Protective Limiting, 1 Rack Space Suggested Model Description Retail Price Dealer Price SC lbs $ $ kg Single channel analog controller with full-range to subwoofer crossover, dynamic EQ, amplifier output monitoring. Use with any SLS or SLS/SBS combination. For 120V 60Hz DSC52 11 lbs $ 2, $ 1, kg 2 in x 4 out digital system controller / crossover parametric EQ, low/high pass filters, shelving filters, signal delay, polarity, compression / limiting. Use with any Community product. For 120V to 240V 50-60Hz Performance data available 24 hours per day at Page 11 of 15

12 CSV SERIES LOUDSPEAKER SYSTEMS DESIGNER SOUND REINFORCEMENT LOUDSPEAKERS FULL-RANGE SYSTEMS IN BEAUTIFUL OAK FINISH Oak Laminate Veneer Finish, PowerSense TM DDP, T-Nut Mounting Points, Neutrik and 1/4" Connectors, Brown Cloth Grille. Suggested Model Description Retail Price Dealer Price CSV25 2-way, 70 Hz - 18 khz, 90 H x 60 V 43 lbs $ $ LF 1 x 12", HF 1 x PZT 19.5 kg 100W RMS, 250W PGM, 8 ohm CSV35 2-way, 60 Hz - 18 khz, 90 H x 60 V 53 lbs $ $ LF 1 x 15", HF 1 x PZT 24.1 kg 150W RMS, 375W PGM, 8 ohm CSV52 3-way, 40 Hz - 18 khz, 90 H x 60 V 99 lbs $ $ LF 1 x 15", MF 1 x 6.5", HF 1 x PZT 44.9 kg 200W RMS, 500W PGM, 4 ohm MONITOR SYSTEMS Oak Laminate Veneer Finish, PowerSense TM DDP, T-Nut Mounting Points, Perforated Steel Grille, Neutrik and 1/4" Connectors Suggested Model Description Retail Price Dealer Price CSV28M 2-way Stage Monitor, 70 Hz - 18 khz, 90 H x 60 V 37 lbs $ $ LF 1 x 12", HF 1 x PZT 16.8 kg 100W RMS, 250W PGM, 8 ohm CSV38M 2- way Stage Monitor, 60 Hz - 18 khz, 90 H x 60 V 50 lbs $ $ LF 1 x 15", HF 1 x PZT 22.7 kg 150W RMS, 375W PGM, 8 ohm CSV800 COMPACT FULL-RANGE SYSTEMS Oak Grain and Black Vinyl Finish, PowerSense TM DDP, 1/4-20 Hanging Point Inserts, Yoke Mount Included, Terminal Barrier Strip Suggested Model Description Retail Price Dealer Price CSV800 2-way, 60 Hz - 18 khz, 90 H x 50 V 22 lbs $ $ LF 1 x 8", HF 1 x PZT 9.9 kg 150W RMS, 375W PGM, 8 Ohm Yoke mounting assembly with drill template included Oak grain vinyl finish, brown grille cloth CSV800B Same as CSV800 with black vinyl finish and black grille cloth CSV800T Same as CSV800 with installed 120 Watt 25 lbs $ $ V/100V TRC120 transformer 11.3 kg CSV800BT Same as CSV800B with installed 120 Watt 70V/100V TRC120 transformer Suggested Model Description Retail Price Dealer Price STRAPKIT * 3 steel straps with a series of 3/8" / 10 mm diameter 3 lbs $38.00 $19.00 holes for attaching rigging to threaded inserts. 1.4 kg WB1 * 2 steel plate-brackets for wall/ceiling mounting. 5 lbs $52.00 $26.00 (Max load = 95 lbs./43.1 kg) 2.3 kg Performance data available 24 hours per day at Page 12 of 15

13 CPL LOUDSPEAKER SYSTEMS ULTRA-COMPACT TRAPEZOIDAL MAGNETICALLY SHIELDED FULL-RANGE SYSTEMS FULL-RANGE SYSTEMS PowerSense DDP, Rigging / Stand / Bracket Attachment Points, Perforated Black Steel Grilles, White Cloth Grille Covering with White Painted Versions, Coaxial HF Dome, Accepts 1/4" 20 Eyebolts. Barrier Strip/Neutrik-compatible Connectors (barrier strip only on 70V versions) Suggested Model Description Retail Price Dealer Price CPL23-B 2-way, 70 Hz - 20 khz, 90º x 90º 20 lbs $ $ LF 1 x 8", HF 1 x 1" dome, 100W RMS, 250W PGM 9.1 kg 8 Ohm, black paint, steel yoke bracket included Recommended amp for max. SPL: 210W to 8 ohms Sensitivity 1W/1m: 87dB SPL (80Hz - 20kHz 1/3 octave bands) CPL23-W White painted version of CPL23-B CPL23-BT Same as CPL23-B with 70V transformer 24.3 lbs $ $ taps for 60W, 30W, 15W, and 7.5W 11.1 kg CPL23-WT Same as CPL23-W with 70V transformer taps for 60W, 30W, 15W, and 7.5W CPL27-B 2-way, 60 Hz - 20 khz, 90º x 90º 28 lbs $ $ LF 2 x 8", HF 1 x 1" dome, 200W RMS, 500W PGM 12.7 kg 4 Ohm, black paint, steel yoke bracket included Recommended amp for max. SPL: 420W to 4 ohms Sensitivity 1W/1m: 86dB SPL (63Hz - 20kHz 1/3 octave bands) CPL27-W White painted version of CPL27-B CPL27-BT Same as CPL27-B with 70V transformer 35.1 lbs $ $ taps for 120W, 60W, 30W, and 15W 15.9 kg CPL27-WT Same as CPL27-W with 70V transformer taps for 120W, 60W, 30W, and 15W Suggested Model Description Retail Price Dealer Price 1/4EYBLTKIT* Eyebolt kit for suspending/rigging, 0.8 lbs $38.00 $19.00 contains four 1" / 25 mm i.d., 1/4"-20, forged eyebolts 0.4 kg and steel cup washers, black zinc plated Use with CPL23/27. Performance data available 24 hours per day at Page 13 of 15

14 ALL WEATHER / ALL PURPOSE LOUDSPEAKER SYSTEMS WET TM WEATHER RESISTANT SOUND REINFORCEMENT / PLAYBACK SYSTEM FULL-RANGE WEATHER RESISTANT SYSTEM Multi-Layer Glass Composite, Passive Crossover with PowerSense DDP, 3 Layer Weather-Stop TM Grille, 1/2-13 Mounting Points, Gland Nut with 12 (3.6m) SJOW Input Cable. Suggested Model Description Retail Price Dealer Price WET218Combo 2 way, 80 Hz-16kHz, 90 o Hx50 o V 23.5 lbs $ $ LF 1 x 8" carbon fiber 10.6 kg HF 1 x 1" compression driver 125W RMS, 300W PGM, 8 Ohm Includes SSY15, 15 1/4" stainless steel bracket WET218TCombo Same as WET218 with 70V line transformer 25.5 lbs $ $ Includes SSY15, 15 1/4" stainless steel bracket 11.6 kg R.5 COMPACT WEATHER RESISTANT SYSTEMS FULL-RANGE SYSTEM Weather Resistant and Durable Rotomolded Construction, Passive Crossover with PowerSense DDP, All Horn Loaded, High Fidelity Five 3/8"-16 Mounting Points, Gland Nut with 12 (3.6m SJOW Input Cable, Light Gray Color. All R.5 models include a WeatherStop TM Stainless steel Grille and Stainless Steel Mounting Yoke. Suggested Model Description Retail Price Dealer Price R.5-94X 2-way system, 90 Hz 16 khz, 90 H x 40 V 39 lbs $ $ LF 1 x 12, HF 1 x 1 compression driver 17.7 kg 200W RMS, 500W PGM, 8 Ohm R.5-94TX Same as R.5-94X with 120W/70V transformer and 41 lbs $ $ switchable 15W, 30W, 60W and 120W 18.6 kg * Performance data available 24 hours per day at Page 14 of 15

15 ACCESSORY MOUNTING AND HARDWARE FOR COMMUNITY LOUDSPEAKER SYSTEMS Suggested Model Description Retail Price Quantity 1-5 Quantity 6+ 1/4EYBLTKIT* Eyebolt kit for suspending/rigging, 0.8 lbs $38.00 $19.00 $19.00 contains four 1" / 25 mm i.d., 1/4"-20, forged eyebolts 0.4 kg and steel cup washers, black zinc plated Use with CPL23/27. 3/8EYBLTKIT* Eyebolt Kit for suspending/rigging, 0.8 lbs $ $ $ contains four 1" / 25 mm i.d., 3/8"-16, forged eyebolts 0.4 kg and steel cup washers, black zinc plated CASTERS4* Kit of 4 heavy-duty, 4" casters for XLT415 and TD lbs $98.00 $ $ kg MP33* 33.5 inch long mounting pole, black finish for 5 lbs $ $ $ mounting Tandem full-range on TD2115 subwoofer 2.3 kg SB5* 5 ft./1.5m long x 1-3/8"/35mm o.d. steel mounting 6 lbs $48.00 $ $ pole, black finish 2.7 kg Use with XLT41E, XLT42E, XLT43E, and XLT51E. For mounting Tandem full-range on TD2118 subwoofer For mounting DnD on XLTPro, MVP or Tandem subwoofer SPKON* Package of 4 inline NL4FC Speakon connectors. 1 lb $ $ $ kg STRAPKIT * 3 steel straps with a series of 3/8" / 10 mm diameter 3 lbs $ $19.00 $19.00 holes for attaching rigging to threaded inserts. 1.4 kg Use with any XLTE. Use with any XP except XLT415. Use with MVP25, 35 and 36. Use with all TD except TD2118. Use with CSV and DnD. WB1* 2 steel plate-brackets for wall/ceiling mounting 5 lbs. $ $ $ (max load = 95 lbs./ 43.1 kg) 2.3 kg Use with any XP except XP509 and XLT415. Use with any MVP except MVP40. Use with CSV and DnD. NOTE: These accessory items noted by (*) do not qualify for quantity pricing. Contact factory for terms and conditions. Performance data available 24 hours per day at Page 15 of 15