UART/USB Interface board Data sheet for UHF RFID Reader/Writer module

Transcription

1 1. General Descriptions LXRFZZUAAA-042 is an interface board for UHF RFID reader writer module, LXRFZZUAAA-027/030/032. [Features] -Signal conversion : UART USB(HID) -100% green material for RoHS compliance -Related product name EU JP US/Canada Evaluation Kit* LXRFZZUAAA-029-KIT LXRFZZUAAA-031-KIT LXRFZZUAAA-033-KIT Reader writer LXRFZZUAAA-027 LXRFZZUAAA-030 LXRFZZUAAA-032 Short Range LXRFZZUCCA-037 LXRFZZUCCA-036 LXRFZZUCCA-036 Antenna Long Range LXRFZZUCCA-035 LXRFZZUCCA-034 LXRFZZUCCA-034 Antenna Interface Board *A reader writer, a short range antenna, a long range antenna, an interface board, cables are included in Evaluation Kit. 2. Block Diagram 1

2 3. Mechanical Information 3-1. Dimensions <Top View> <Bottom View> <Side View> Mark Size Mark Size Mark Size L /- 0.3 c / t / W /- 0.3 d / t / a / t / b /

3 3-2. Pin description <Top View> USB コネクタタイプ : Micro USB Type B Receptacle Pin No. Pin Name. Type Description 1 VSS Supply Pad GND reference 2 VSS Supply Pad GND reference 3 RXD Digital I/O UART RXD 4 VCC Supply Pad DC5V Output 5 TXD Digital I/O UART TXD 6 VSS Supply Pad GND reference 7 NC NC Not Connect 8 VIO Supply Pad I/O Volatage Output 9 CSE Digital I/O Chip Select Enable Output 10 NC NC Not Connect 11 VSS Supply Pad GND reference 12 VSS Supply Pad GND reference 13 VBUS SupplyPad USB Bus Power 14 D- Digital I/O USB D- 15 D+ Digital I/O USB D+ 16 NC NC Not Connect 17 VSS SupplyPad GND reference 12 pin Connector : Hirose DF11CZ-12DS-2V (22). microb USB Connector : Molex Counterpart connector :Hirose DF11 Series Receptacle 12pin.,Hirose DF11CZ012DP-2V etc. 3

4 4. Characteristics 4-1. Basic configuration uses CP2110 (Silicon Labs). Please refer the CP2110 data sheet for a functional description Ratings Limiting values parameter Symbol Limiting values Unit Min Max Power Supply Voltage V IN V Storage temperature T STG o C Operation condition Parameter Symbol Min Typ Max Unit Power Supply Voltage V IN V Ambient Temperature T amb o C 4-3. Electrical Characteristics Without notice; Ambient Temperature (T amb = +25 ), Operational voltage ranges. Parameter Symbol Conditions Min Typ Max. Unit Remarks 1 Consumption Current I 40 ma 5. Packaging 5-1 Quantities per 1 tray 10pcs / Tray 5-2 Quantities per 1 carton 10pcs / Carton 5-3 Minimum order quantity 10pcs 4

5 6. Contact window URL: products/rfid For any inquiries/queries, please feel free to contact us. NOTICE 1. Storage Conditions: To avoid damaging, be sure to observe the following points. - Store products where the ambient temperature is 15 to 35 C and humidity 45 to 75% RH. (Packing materials, In particular, may be deformed at the temperature over 40 C.). - Store products in non corrosive gas (Cl 2, NH 3,SO 2, No x, etc.). - Stored products should be used within 6 months of receipt. 2. Handling Conditions: Be careful in handling or transporting products because excessive stress or mechanical shock may break products.! Note: Please make sure that your product has been evaluated and confirmed against your specifications when our product is applied to your product. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from such agreement. 5