COOLEDGE NORTH AMERICA POWER & CONTROL (24V) SPECIFICATIONS

Transcription

1 5 YEAR SYSTEM WARRANTY 5 YEAR SYSTEM WARRANTY COOLEDGE NORTH AMERICA POWER & CONTROL (4V) SPECIFICATIONS PROJECT REFERENCE TYPE SPECIFIED BY QUANTITY DATE NOTE For Luminous Surfaces SYSTEM OVERVIEW Control on the scale of nature enables large luminous surfaces using industry standard protocols. AC Mains (Line) Power Supply 4VDC Power Supply: converts AC mains (line) power to safe low voltage 4V power Cooledge Control Module: receives control input signals to dim and/or tune Cooledge Lighting Systems. Output is max. per channel Control Input Cooledge Control Module GENERAL Location Operating Temp. Storage Temp. Relative Humidity Operating Voltage Indoor, dry location only 3- F F 90% max (non-condensing) Nominal 4VDC CERTIFICATIONS WARRANTY Year Limited Warranty: Parts and workmanship FEATURES Compatible with a full range of industry standard control protocols from simple analog (0-0V), to digital (DALI/DMX), and wireless (Casambi) options Up to channels of power enables larger luminous surfaces while reducing the number of line voltage connections required Simple and economic control for illumination that includes deep dimming. Test mode available for on-site troubleshooting. Cooledge Lighting Inc Commerce Parkway Richmond, BC V6V L Canada PSD-0009-R0 068 (LTR) /5 O F T W cooledgelighting.com Cooledge Lighting reserves the right to change materials or modify the design of its product without notification as part of the company s continuing product improvement program.

2 POWER SUPPLIES AND LED DRIVERS = Purpose: Converts AC mains (line) power to nominal 4VDC power W Power Supply Power Supply SPECIFICATIONS 00W Dimensions (in) 5. x 4. x x 4.9 x.7 Maximum Output Power (W) Output Voltage (VDC) 4 4 Input Voltage Range (VAC) Nom Nom Efficiency (% at full load typ.) 9 95 (77V) Power Factor (full load) (77V) Total Harmonic Distortion (%) < 0 (full load) < 0 (>40% load) Start-up Time (sec) 0.85 (full load) 0.5 Max. Inrush Current 60A 35A Certification cul Listed cur Recognized Rated Lifetime (hr) 70,000 6,000 Weight (lb) Output Power Ordering Code Description 00W EPSS-00-4V Enclosed 00W Power Supply, 4V, IP65 Rated Enclosure (cul Listed) PSS-400-4V Power Supply, 4V, No Enclosure* *Contact Cooledge for recommendations PSD-0009-R0 068 (LTR) /5

3 COOLEDGE CONTROL MODULE: GENERAL = Purpose: Cooledge Control Modules perform two functions: ) convert a single incoming DC power source to multiple Class output (<00W) channels; and ) convert incoming control signals to dimming and/or CCT tuning output to operate Cooledge. There is a single type of Control Module used to control : SCT = Static Color Temperature > SCT Control Modules are used for dimming only with AC Mains (Line) Power Supply 0/-0V DALI DMX Wireless (Casambi) Cooledge Control Module Static Color Temperature (SCT) (66mm).6 0mm 8.7 (36mm).4 SPECIFICATIONS Dimensions (in)* 8.7 x.6 x.4 Output Power (W per channel) 90: SCT = up to 4CH Circuit Protection Overcurrent, Overvoltage, Reverse Polarity, Short Circuit Dimming Frequency (Hz) 3950 Dimming Range (%) Standalone Test Mode Available Maximum Control Current (Source) 0.5 ma Max. Wire Size AWG Rated Lifetime (hr) 70,000 Weight (lb) 0.5 * Contact Cooledge for IP65 enclosure recommendation. PSD-0009-R0 068 (LTR) 3/5

4 3 COOLEDGE CONTROL MODULES: DALI AND 0-0V Control Modules identified as DALI have dual protocol capability:. if the DALI input is used the module will operate based on incoming DALI control signals and each output channel can be controlled independently. if 0-0V input is used, the module will operate based on incoming 0-0V signals and all output channels will be controlled by this input. PSU 4V DALI OUTPUT DALI INPUT DA+ DA- DA+ DA- Option: DIM PURPLE (+) 0/-0V GREY (-) Option: Static Color Temperature (SCT) 0-0V & DALI CTR-SCT-DAL-4V 360W (max.) Control Module, DALI/0-0V, 4V, Single Channel x 4, 0.05% Dimming 4 COOLEDGE CONTROL MODULES: DMX Control Modules identified as DMX operate on control signals received from a DMX controller and each output channel can be controlled independently. DMX INPUT D+ D- PSU 4V DMX OUTPUT D+ D- When installing the final controller (termination point) in a network use the provided jumper on the indicated header. Dipswitches 4- are used for addressing - Switches - 3: Mode selection switches - Switches 4 - : Addressing switches DMX CTR-SCT-DMX-4V 360W (max.) Control Module, DMX, 4V, Single Channel x 4, 0.05% Dimming PSD-0009-R0 068 (LTR) 4/5

5 5 COOLEDGE CONTROL MODULES: WIRELESS (CASAMBI) Control Modules identifi ed as CAS operate on control signals received from a Casambi (Bluetooth Low Energy wireless protocol) enabled device including a wireless switch, smartphone or tablet..6 Smartwatch Smartphone Tablet.4 Casambi Enabled Device Images Courtesy of Casambi Cooledge CAS Control Module PSU 4V CASAMBI APP OR CASAMBI SOFTWARE Wireless (Casambi) CTR-SCT-CAS-4V 360W (max.) Control Module, Casambi wireless, 4V, Single Channel x 4, 0.05% Dimming PSD-0009-R0 068 (LTR) 5/5