Miniature Rotary DIP Switch
|
|
- Denis Hicks
- 5 years ago
- Views:
Transcription
1 Miniature Rotary DIP Switch Miniature ( mm size) Rotary DIP Switch Mounting space reduced by 50%. (compared with conventional models) SMT and through hole type Available. Side-actuated type available. Gold-plated contacts ensure high reliability. RoHS ompliant (Refer to page 6 for details) Ordering Information Through hole type ( Terminal) Top-actuated, extended shaft Side-actuated, flat Side-actuated, extended shaft switching positions stick Output code 0 BD/ Top :6 A6K-0RF A6K-0RS A6KV-0RF A6KV-0RS hexadecimal 6 Side: code A6K-6RF A6K-6RS A6KV-6RF A6KV-6RS Through hole type (5 Terminal) Top-actuated, extended shaft Side-actuated, flat Side-actuated, extended shaft switching positions stick Output code 0 BD/ Top :6 A6K-0RF A6K-0RS A6KV-0RF A6KV-0RS hexadecimal 6 Side: code A6K-6RF A6K-6RS A6KV-6RF A6KV-6RS SMT type ( Terminal, Stick) Top-actuated, extended shaft switching positions stick Output code 0 BD/ A6KS-0RF A6KS-0RS 6 6 hexadecimal ---8 code A6KS-6RF A6KS-6RS SMT type (5 Terminal, Stick) Top-actuated, extended shaft Side-actuated, flat Side-actuated, extended shaft switching positions stick Output code 0 BD/ A6KS-0RF A6KS-0RS A6KSV-0RF A6KSV-0RS 6 hexadecimal code A6KS-6RF A6KS-6RS A6KSV-6RF A6KSV-6RS
2 SMT type ( Terminal, Embosse) Top-actuated, extended shaft switching d positions Output code tape 0 BD/ hexadecimal code A6KS-0RF-P A6KS-0RS-P A6KS-6RF-P A6KS-6RS-P SMT type (5 Terminal, Embosse) Top-actuated, extended shaft Side-actuated, flat Side-actuated, extended shaft switching positions Output code Note: Orders must be made in multiples of pack quantity. Switch are not sold individually. Specifications *Add 0.0 g for the extended-shaft version of each model Output odes 0-position Models Note: indicates that the internal switch is ON. 6-position Models 0 BD/ A6KS-0RF-P A6KS-0RS-P A6KSV-0RF-P A6KSV-0RS-P hexadecimal code A6KS-6RF-P A6KS-6RS-P A6KSV-6RF-P A6KSV-6RS-P Rating Ambient oating temature Ambient oating humidity Insulation resistance ontact resistance Dielectric strength Vibration resistance Shock resistance Electrical life expectancy Oating torque Weight Through hole terminal SMT terminal VD 5 ma,.5 VD 0 A (minimum current) - 0 to %RH max. (with no icing or dewing) 5 to 95 %RH (for 5 to 5 ) 00 MΩ min. ode BD/hexadecimal ---8 code Position mω max. (initial value) 50 VA for minute between terminals of the same polarity, and between terminals of different polarity Malfunction: 0 to 55 Hz,.5-mm double amplitude Malfunction: 00 m/s min. 0,000 steps ( VD 5 ma) N m max. : 0.8 g, Side-actuated, flat: 0.7 g : 0.6 g, Side-actuated, flat: 0.9 g ode BD/hexadecimal ---8 code Position A B D E F
3 Dimensions Through hole type Top-actuated Flat Models with Terminal Arrangement A6K-0RF A6K-6RF.5 5 (unit: mm) Top-actuated Extended shaft Models with Terminal Arrangement A6K-0RS A6K-6RS ±0. dia. 8 A6K-6RF 8 A6K-0RF 8 A6K-6RS 8 A6K-0RS Side-actuated Flat Models with Terminal Arrangement A6KV-0RF A6KV-6RF 7.9 Side-actuated Extended-shaft Models with Terminal Arrangement A6KV-0RS A6KV-6RS ±0.dia A6KV-6RF A6KV-0RF A6KV-6RS A6KV-0RS 8 8 Top-actuated Flat Models with 5 Terminal Arrangement A6K-0RF A6K-6RF 8 8 Top-actuated Extended shaft Models with 5 Terminal Arrangement A6K-0RS A6K-6RS ±0. dia. A6K-6RF A6K-0RF A6K-6RS A6K-0RS Side-actuated Flat Models with 5 Terminal Arrangement A6KV-0RF A6KV-6RF 7.9 Side-actuated Extended-shaft Models with 5 Terminal Arrangement A6KV-0RS A6KV-6RS ±0. dia A6KV-6RF 8 A6KV-0RF 8 8 A6KV-6RS A6KV-0RS
4 SMT type Top-actuated Flat Models with Terminal Arrangement A6KS-0RF A6KS-6RF.5 Top-actuated Extended shaft Models with Terminal Arrangement A6KS-0RS A6KS-6RS ±0. dia A6KS-6RF A6KS-0RF 5 8 A6KS-6RS 8 A6KS-0RS 5 Top-actuated Flat Models with 5 Terminal Arrangement A6KS-0RF A6KS-6RF 8 8 Top-actuated Extended shaft Models with 5 Terminal Arrangement A6KS-0RS A6KS-6RS ±0. dia. 0.6 A6KS-6RF A6KS-0RF A6KS-6RS A6KS-0RS Side-actuated Flat Models with 5 Terminal Arrangement Side-actuated Extended-shaft Models with 5 Terminal Arrangement A6KSV-0RF A6KSV-0RS A6KSV-6RF A6KSV-6RS A6KSV-6RF A6KSV-0RF.8.8±0. dia. A6KSV-6RS A6KSV-0RS
5 PB utout Dimensions (TOP VIEW) Terminal Arrangement Through hole (Top-actuated Models) Through hole (Side-actuated Models) SMT (Top-actuated Models).5±0.05.5±0.05.5± ± dia dia.. (Unit: mm).8 7.6± ± Terminal Arrangement Through hole (Top-actuated Models) dia. Through hole (Side-actuated Models) dia ± ± SMT (Top-actuated Models) SMT (Side-actuated Models) : Through hole:pattern prohibited area 5
6 Safety Precautions Note: Refer to Safety Precautions in the DIP Switches (at. No. X00) for details on general safety precautions. orrect Use Soldering General Precautions for Soldering. Make sure that Rotary DIP Switches are set to 0 before soldering. Misalignment may result in reduced sensitivity due to the soldering heat. Reflow Soldering Observe the following conditions for reflow soldering. (Measurement location: Top of Switch) Temature ( ) 60 max Preheating Actual soldering Environment for Storage and Use To prevent discoloration of the terminals and other problems during storage, do not store the in locations subject to the following conditions. () High tematures or humidity () orrosive gases () Direct sunlight Also, the is not waterproof or splash-resistant. Do not install or use the in locations that are subject to contact with water. Do not subject the to freezing or condensation. Handling Do not apply excessive oating force to the Switch. Otherwise the Switch may be damaged or deformed, and the switch mechanism may malfunction as a result. Set rotary-type DIP Switches with a flat-blade screwdriver that fits into the screwdriver groove. Using a screwdriver of inappropriate dimensions, or using a tool other than a flat-blade screwdriver may cause damage to the groove that may make the Switch impossible to oate. Extended-shaft models can also be manually set, but be sure not to apply an excessive amount of force to the Switch when setting it. Automatic Soldering Bath Soldering temature: 60 max. (Preheating: 50 0s max.) Soldering time: 5s max. Manual Soldering Soldering temature: 50 max. at the tip of the soldering iron Soldering time: s max. Do not solder the Switch more than twice including any rectification soldering. An interval of five minutes is required between the first and second soldering. Washing The cannot be washed. Attempting to wash it may result in malfunction due to flux and foreign matter from the PB flowing into the together with the cleaning fluid. Using Flux The type of flux or the amount or method in which it is applied, including its use in reflow soldering, can have adverse effects on Switch formance. Assess the pro flux, conditions, and methods prior to using it. RoHS ompliant 60 to max. Time (s) The "RoHS ompliant" designation indicates that the listed models do not contain the six hazardous substances covered by the RoHS Directive. Reference: The following standards are used to determine compliance for the six substances. Lead :,000 ppm max. Mercury :,000 ppm max. admium : 00 ppm max. Hexavalent chromium :,000 ppm max. PBB :,000 ppm max. PBDE :,000 ppm max. Packing Specifications dia. Perforations ±0..5±0.5.75± ±0.5 ±0.5 (7) () Tape drawing direction P=±0.5 (P0=0±0.).5 dia. holes Tape drawing direction 6
7 7
8 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by at. No. A7-E-0 In the interest of product improvement, specifications are subject to change without notice. OMRON orporation Electronic omponents ompany Switch Division Manual Switch Department Shiokoji Horikawa, Shimogyo-ku, Kyoto, Japan Tel: (8) /Fax: (8) URL : Printed in Japan 008-M (008)
Top-actuated (B3U-1000 Series)
Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.
More informationDIP Switch (Slide Type)
DIP Switch (Slide Type) Low-cost DIP Switch with Slide Pins Designed to DIP (Dual Inline ) standards and allows automatic mounting with IC insertion machines. Washable with seal tape available. SMT (surface-mounted
More informationSolid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationTerminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
More informationTechnical Information Tactile Switches
Technical Information Cautions Use the Switch within the rated voltage and current ranges, otherwise the Switch may have a shortened life expectancy, radiate heat, or burn out. This particularly applies
More informationSolid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
More informationConductive Level Controller
Conductive Level Controller 61F-D21T-V1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at ON or OFF using self-holding circuits. Sensitivity adjustment
More informationSolid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application
More informationSolder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
More informationSwitching Power Supply
Switching Power Supply Highly Reliable and Full-functioned 1-year Life Expectancy, 12, 1, or 24 V output voltages, and 30, 60, 0, or 10 W power ratings. 8 to 132 VAC or 170 to 264 VAC switchable input
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationE4PA. Ultrasonic Displacement Sensor. Ordering Information
Ultrasonic Displacement Sensor Ideal for controlling liquid level. Long sensing distance and high-resolution analog output. High-precision detection with a wide range of measurements Four types of Sensors
More informationD3SK. The smallest detection switch in the industry with high precision operation. ( mm (W D H)) List of Models. Surface Mount Switch
The smallest detection switch in the industry with high precision operation. (OMRON's data as of pril 2008) (.0.5 0.9 mm (W H)) Ultra small size and ultra low profile contributing to down-sizing of sets
More informationPin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
More informationD3SH. List of Models. Surface Mount Switch S H SPST-NO SPST-NC. Long Lever Models. Standard Lever Models
D urface Mount witch The smallest detection switch in the world. Ideal for miniature mobile devices (OMRON's data as of eptember 2007) Ultra small size and ultra low profile contributing to down-sizing
More informationModel Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationonlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationAppearance Size (mm) Power supply voltage Model (W H D) 100 to 240 VAC K3SC to 240 VAC
Interface Converter A compact converter that allows communications between RS-C/USB and RS-/8 devices. Ideal for industrial applications. Allows communications between RS-C/USB (Universal Serial Bus) and
More informationSS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
More informationSolid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationMiniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
More informationSetting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit)
Temperature Controller DIN-sized (48 x 48 mm) Temperature Controller With Digital Setting Compact, low-cost Temperature Controller Incorporates proportional adjustment and reset adjustment function. Incorporates
More informationHandheld Reader Writer
Handheld Reader Writer CH1D-V2 A Compact Lightweight Easy-to-use Pen-type Reader Writer. Connects directly to a personal computer or PLC via RS-232C. The Reader Writer s protective construction is IP63
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
More informationContact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
More informationFPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
More informationRTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationS8VE (60/90/120/180/240-W Models)
Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,
More information(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
More informationFeatures Sealed Construction for Automatic Soldering. Contact form. Operating Force SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO
B3W Features Sealed Construction for Automatic Soldering Available in two sizes: 6x6mm (1) and 12x12mm square (4) Ideal for applications such as audio, office and communications equipment, measuring instruments,
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationE4PA-N. Application Examples. Features. Ultrasonic Displacement Sensor. Now, more advanced with a new mutual interference prevention function.
Ultrasonic Displacement Sensor Now, more advanced with a new mutual interference prevention function. Application Examples Detecting slackness in sheet materials Detecting liquid levels Remotely detecting
More informationOrdering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
More informationSpecial-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
More informationHIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
More informationWithout Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating
LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationonlinecomponents.com
YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationContact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationIntelligent Flag Amplifier
V0 RFID System V0-HAM42-DRT Intelligent Flag Amplifier for CompoBus/D System Configuration Master Unit Master Unit CompoBus/D ( -compatible) I/O I/O V0-HAM42-DRT (Amplifier) V0-HS@@ (Sensors) V0-D@@ (Data
More informationBasic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
More informationSolid-state Timer. Mounting system contact t contact. t Surface mounting/ track mounting
Solid-state Timer DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired time can be
More informationModel Number Structure
Analogue Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More informationModel Number Structure
Thumbwheel Switch Refer to Warranty and Application Considerations (page 1) and Safety Precautions (page 3). General-purpose Thumbwheel Switches A wide range of output codes are available. Use the back-mounting
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationModel Number Structure
Temperature Controller CSM DS_E_5_1 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More informationSwitching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
More informationContact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationFor board-to-board. Narrow pitch connectors (0.5mm pitch)
Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile
More informationMain contacts Auxiliary contact Number of input channels Rated voltage Model Category 24 VAC/VDC 3PST-NO SPST-NC 1 channel or 2 channels possible
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
More informationG3NE. Model Number Structure. Solid State Relays. Model Number Legend. Compact, Low-cost, SSR Switching 5 to 20 A
Solid State Relays CSM DS_E_4_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationmasterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
More informationSwitch Mode Power Supply
Switch Mode Power Supply S8JX (/0/100/10-W Models) Compact Power Supply Compliant with Global Standards Output voltages of V, 12 V, and 2 V are available for between to 10 W capacity (100 W, 10 W: 2-V
More information1 Form A 8A/16A, Small Polarized Power Relays (latching type)
8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL
More informationRA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationClassification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More informationModel Number Structure
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid State Relays G3 @-VD CSM_G3F_G3FD_DS_E_2_1
More informationM-Series. Lead Wire Length (H, mm)
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
More informationNPN output PNP output Cord connection Cord length: 2 m Through-beam 7 m Light-ON. 2 m. (selectable by wiring) Diffuse reflective 0.
Built-in Amplifier Photoelectric Sensor E3V3 Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance. A series of models with an M8 metal junction connector
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationMOS FET Relay. Ordering Information. Application Examples G3VM- XN(F)/4N(F)
MOS FET Relay G3VM- XN(F)/4N(F) SSR for Switching Analog Signals, with an I/O Dielectric Strength of 2.5 kvac Using Optical Isolation Switches minute analog signals. Linear voltage and current characteristics.
More informationRA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationFor board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) A35US With Power Terminal 5. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New
More informationLight ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)
All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity
More informationThree-phase Phase-sequence Phase-loss Relay
Three-phase Phase-sequence Phase-loss Relay K8AB-PM Ideal for monitoring 3-phase power supplies for industrial facilities and equipment. Monitor overvoltages, undervoltages, phase sequence, and phase loss
More informationSlim Relay G2RV. Model Number Structure. Model Number Legend. The World's First Industrial Slim Relay NTLP: WAITING FOR @
Slim Relay 2R The World's First Industrial Slim Relay arge plug-in terminals for easy connection. ED indicator and mechanical flag to check operation. Transparent housing enables checking relay condition.
More informationSingle-phase Voltage Relay
Single-phase Voltage Relay K8AB-VW Ideal for voltage monitoring for industrial facilities and equipment. Monitor for overvoltages and undervoltages simultaneously. Separate settings and outputs supported
More informationGeneral Specifications
Series ND mm Process Sealed SMT DIP otaries eneral Specifications Electrical apacity (esistive Load) Switching ating: ma @ 5V D Nonswitching ating: ma @ 5V D Other atings ontact esistance: Insulation esistance:
More informationThe 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
More informationFilm Chip Capacitors. PPS DIELECTRIC CB Series GENERAL DESCRIPTION ADVANTAGES APPLICATIONS PERFORMANCE CHARACTERISTICS
APPLICATIONS General purpose function in low voltage applications: Filtering, coupling, decoupling Time-constant Oscillation timing circuit Typical applications would be: Automotive (navigation system...)
More informationOrdering Information. Smart Sensors (Inductive Displacement Type) ZX-E Series. Sensors
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -797575 Fax : -79757 E-mail : sales@ashalain.com Smart Sensors (Inductive Displacement
More informationHIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES 1. Breakthrough height of 9.8 mm.386
More information2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
More informationD2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
More informationSnap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1
Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant
More informationJV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
More informationActuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
More informationDISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC
More informationNARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
More informationPC RELAY TERMINAL/ PC TERMINAL
Input points Output points PC Relay (PC relays mounted) PC Input points Output points Input points Output points Input points Output points Input points Output points Output points ORDERING INFORMATION
More informationA35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current
High current type For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35P Rated current Number of power contacts Max. 4 pins Max. 8 pins Rated current Power contact Signal contact Total 1.5 A/pin
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationOrdering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
More informationSolid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket
Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More information7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
More informationFor board-to-board. Narrow pitch connectors (0.8mm pitch)
To Be Discontinued For board-to-board Narrow pitch connectors (0.8mm pitch) P8 5.88mm 6.83mm Socket Header RoHS compliant FEATURES 1. The product lineup includes low profile heights of 3.0 mm, 3.5 mm,
More information