VGA EXTENDER USER MANUAL HIT-VGA-CAT5-142WPRO HIT-VGA-CAT5-144WPRO. (Local) HIT-VGA-CAT5-R300WPRO. (Remote)

Transcription

1 VGA EXTENDER HIT-VGA-CAT5-142WPRO HIT-VGA-CAT5-144WPRO (Local) HIT-VGA-CAT5-R300WPRO (Remote) USER MANUAL

2 Package Contents for HIT-VGA-CAT5-300WPRO Local Unit Remote Unit 2 power adapter DC 12V with lock 8 foot pads 4 screws 1 VGA 1.2M cable (HD-15 Male to Male) Package Contents for HIT-VGA-CAT5-142WPRO Local Unit 1 power adapter DC 12V with lock 4 foot pads 2 screws 1 VGA 1.2M cable (HD-15 Male to Male) Package Contents for HIT-VGA-CAT5-144WPRO Local Unit 1 power adapter DC 12V with lock 4 foot pads 2 screws 1 VGA 1.2M cable (HD-15 Male to Male) Package Contents for HIT-VGA-CAT5-R300WPRO Remote Unit 1 power adapter DC 12V with lock 4 foot pads 2 screws Any thing missed, please contact with your vendor.

3 Features Through the VGA auto video adjustment extender, you can use one PC to display identical image and extension of VGA signal up to 300 meter. Resolution up to 1600 x 1200 Equalization & Gain is adjusted automatically. VGA s RGB skew is adjusted automatically. EDID copy(from Remote to Local) One CAT.5 cable extension. **Note : HIT-VGA-CAT5-14*WPRO only allow EDID copy from CAT.5 output port1. Specifications Function HIT-VGA-CAT5-142WPRO HIT-VGA-CAT5-144WPRO VGA In Connector HD-15 Female x 1 VGA Out Connector HD-15 Female x 1 RJ-45 Connector 2 4 Max. Resolution Depends on remote unit Cable Distance 300 m (Max.) Power Adapter (Min.) DC 12V with lock Housing Metal Weight 470g 480g Dimensions (LxWxH) 171x119x25 mm

4 LOCAL FRONT VIEW HIT-VGA-CAT5-142WPRO 1. CAT.5 (RJ-45 Connector) 2. Power LED 3. LINK LED HIT-VGA-CAT5-144WPRO LOCAL REAR VIEW 1. Power jack 2. VGA Output (HD-15 Female Connector) 3. VGA Input (HD-15 Female Connector) VGA-ED2XW/VGA-ED4XW REMOTE FRONT VIEW HIT-VGA-CAT5-R300WPRO 1. CAT.5 (RJ-45 Connector) 2. Power LED 3. LINK LED REMOTE REAR VIEW HIT-VGA-CAT5-R300WPRO 1. Power jack 2. DIP switch 3. VGA Output (HD-15 Female Connector)

5 Installation 1. Connect PC VGA port by using standard VGA cable to Local. 2. Connect Monitor by using standard VGA cable to Local. 3. Connect CAT5 cable to Local and Remote. 4. Connect Monitor by using standard VGA cable to Remote. 5. Power on extender device. 6. Power on Local PC. AUTO Video adjustment Operation When the user reconnects the CAT5/E cable between the local and remote unit, the VGA-Extender will start to adjust the remote video automatically in seconds. For better video adjust result, the resolution of video source (usually: PC) should under or equal the resolution For example, when the user works with the VGA resolution change the video resolution to be before install the VGA-Extender; then install the VGA-Extender. And after the VGA-Extender finished the auto video adjustment procedure, change the video resolution back to and process lock video setting. AUTO EDID Copy Operation When the user reconnects the CAT.5 cable between the local and remote unit, the VGA-Extender will start to copy EDID from remote Monitor to the memory of the local unit. And local unit will save the EDID content from the remote monitor even when the VGA-Extender re-power. The VGA-Extender will update the EDID content, when the remote monitor s EDID is different with the EDID in the memory of the VGA-Extender. **note: When remote unit connects a new monitor, it needs re-connect the VGA cable between the local unit and PC, so that some windows system (like Windows 7 etc) then begin to require the EDID content from local unit. After that, the windows update the monitor information. *note: When there is no connection between the local and remote unit, the local unit will use the EDID content of the local monitor to the PC. DIP Switch of Remote For advanced usage, the user can follow the below table to adjust the video after auto video adjustment procedure. Switch Position SW1 SW2 SW3 OFF ON ON OFF ON OFF OFF OFF ON OFF OFF OFF ON OFF OFF ON OFF ON ON ON OFF Softness (-) -0- (+) Sharpness ON ON ON Lock Video Setting

6 Lock video setting of Remote We suggest the user Lock Video Setting by tapping the SW1, SW2, and SW3 to be ON, after the extender finish the auto video adjustment procedure. So even when the VGA-Extender re-power or the CAT5 connection fail temporarily, the video setting parameter of VGA-Extender won t change or restart the auto video adjustment procedure. Troubleshooting 1. If no video signal is displayed on the monitor. (1) Please check all of VGA cable and CAT5 cable is loosened or disconnected. (2) Power adapter is not connected. 2. If video signal is foggy or un-clear, please check VGA connector, or low the VGA resolution for long cable. It is highly recommended to use optimal CAT5 cable length to get the best video quality and not to waste unnecessary CAT5 cable. Wiring Information & Coding Conductor Identification RJ45 Pin Assignment Color Code for Conductor Pair 1 Pair 2 Pair 3 Pair 4 5 White-Blue 4 Blue 1 White-Orange 2 Orange 3 White-Green 6 Green 7 White-Brown 8 Brown