WaterMaster Select Electromagnetic flowmeter. The perfect fit for water industry applications

Transcription

1 Data sheet DS/FES121/FET141/FET161 EN Rev. WaterMaster Select The perfect fit for water industry applications Select solution for your Selected applications designed for use in water and waste water applications, from sewage plants to distribution networks Quick transmitter exchange revolutionary data storage enables transmitter interchange and commissioning without the need for reconfiguration Octagonal full-bore flow measurement sensor unique inner octagonal bore reduces sensitivity to flow profile disturbances

2 The Company We are an established world force in the design and manufacture of instrumentation for industrial process control, flow measurement, gas and liquid analysis and environmental applications. s a part of BB, a world leader in process automation technology, we offer customers application expertise, service and support worldwide. We are committed to teamwork, high quality manufacturing, advanced technology and unrivalled service and support. The quality, accuracy and performance of the Company's products result from over 100 years experience, combined with a continuous program of innovative design and development to incorporate the latest technology. Over ten flow calibration plants are operated by the Company, which is indicative of our dedication to quality and accuracy. Introduction Setting the standard The WaterMaster Select range, available in sizes 40 to 300 mm (1 1 /2 to 12 in), is designed specifically for use on the many diverse applications encountered in the Water and Waste-water industry. The specification, features and user benefits offered by this range are based on BB's worldwide experience in this industry and they are all targeted specifically to the industry's requirements. Comprehensive features wide range of features and user benefits are built into WaterMaster Select as standard: bi-directional flow true electrode and coil impedance measurement comprehensive simulation mode universal switch mode power supply (options are available for C and DC supplies) programmable multiple alarm capability HRT bus option 3 configurable pulse/frequency and alarm outputs ssured quality WaterMaster Select is designed and manufactured in accordance with international quality procedures (ISO 9001) and all flowmeters are calibrated on nationally-traceable calibration rigs to provide the end-user with complete assurance of both quality and performance of the meter. Flow performance WaterMaster Select has an operating flow range with ±0.5 % accuracy as standard in both forward and reverse flow directions. 2 DS/FES121/FET141/FET161 EN Rev.

3 WaterMaster Select electromagnetic flowmeter The perfect fit for water industry applications Unrivalled in its scope and applications expertise, BB offers the world's most comprehensive range of flow measurement products. The FlowMaster family of products is unsurpassed in the number of proven measurement techniques, variety of models and scope of application and includes the WaterMaster Select range of Electromagnetic Flowmeters. Getting the best levels of efficiency and performance from your production process requires reliable, accurate instrumentation. WaterMaster Select provides the flexibility to solve your most demanding water applications enabling previously unattainable operational and financial benefits. WaterMaster Select is the ultimate solution for flow measurement and management in sectors as diverse as water, wastewater, sewage and effluent. WaterMaster Select delivers speed, simplicity and ease of use at every stage of the product's lifecycle. In fact, WaterMaster Select doesn't just plug the gaps left by competitive products, it is simply the best flow metering solution available today. Powerful and flexible transmitter The backlit, graphical display is rotated easily up to 180 (90 each way) without any tools, enabling users to position it as best fits their needs. 'Through-the-glass' control allows local operator interface to enable short, quick data entry for all user-specific parameters. Superior control through advanced sensor design Innovative, patented octagonal sensor design improves flow profile and reduces up- and down-stream piping requirements for the most commonly used sizes of 40 to 200 mm (1 1 /2 to8in). Transmitter display Octagonal bore Using a unique, controlled derivative excitation combined with advanced filtering, WaterMaster Select improves accuracy by raising zero stability to new levels, resulting in higher accuracy measurements. Proven in the toughest applications, WaterMaster Select's rugged, robust and buriable sensors eliminate the need for expensive meter chambers thus providing a long, productive and maintenance-free asset life. BB's universal Human Machine Interface (HMI) simplifies operation, maintenance and training; thereby reducing cost of ownership and providing one common user experience. The WaterMaster Select versions utilize an electronics converter module to simplify installation and reduce the number of spare parts. 2 Variants of the transmitter module are available, Standard and HRT both variants enable online modification and monitoring of parameters. The WaterMaster Select transmitter module features active current and passive pulse outputs. DS/FES121/FET141/FET161 EN Rev. 3

4 Intuitive navigation and configuration The user-friendly interface allows fast and simple data entry for all parameters. 'Easy Setup' guides the operator step-by-step through the menu to set parameters as quickly as possible, thereby simplifying the commissioning phase. Improved performance through Digital Signal Processing (DSP) dvanced Digital Signal Processing (DSP) gives improved performance and enables real time measurements for maximum reliability. DSP enables the transmitter to separate the real signal from the noise, therefore providing high quality outputs especially in harsh environments involving vibration, hydraulic noise and temperature fluctuation. Speed, ease and security in the field 'Fit-and-Flow' data storage inside WaterMaster Select eliminates the need to match sensor and transmitter in the field. On initial installation, the self-configuration sequence automatically replicates into the transmitter all calibration factors, meter size and serial numbers, as well as customer site-specific settings, eliminating the opportunity for error. This redundant storage of data in both the sensor and transmitter memory is continually updated during all operations to ensure the integrity of the measurement. n automatic data self-repair routine corrects any data corruption such as totalizer volume corruption that could occur during a power failure. Detailed diagnostics for rapid decision making WaterMaster Select is proven to be robust and reliable, with unmatched diagnostic capabilities providing the correct information to keep your process up and running. WaterMaster Select flow performance m 3 /h Q max (Q4) DN (m 3 /h) , , ,125 WaterMaster Select flow performance gal/min Q max (Q4) NPS/NB (DN) (gal/min) 1 1 /2 (40) (50) /2 (65) (80) (100) 1,376 5* (125) 1,376 6 (150) 3,467 8 (200) 5, (250) 8, (300) 13,759 Note. WaterMaster permanent flowrate Q3 is Q4 / DS/FES121/FET141/FET161 EN Rev.

5 System accuracy ±2 mm/s below 0.4 m/s ±0.5 % above 0.4 m/s Specification sensor Functional specification Pressure limitations s per flange rating Temperature limitations mbient temperature Remote transmitter Environmental protection Rating: IP67 (NEM 4) 20 to 70 C ( 4 to 158 F) Process temperature 6 to 70 C (21 to 158 F) non approved 0.1 to 50 C (32.2 to 122 F) Error (%) Q3 1 Qmax (Q4) Conductivity >25 µs/cm 1 Transmitter mounting Remote Electrical connections 20 mm glands (not supplied) 6 Sensor cable BB WaterMaster Select cable standard Maximum length 30 m (98 ft) 8 10 Flow Velocity (m/s) DS/FES121/FET141/FET161 EN Rev. 5

6 Physical specification Wetted parts Lining material Size Range Liner WRS pproved DN Polypropylene DN Elastomer Electrode material Stainless steel 316 L Potential equalizing rings vailable as spares Lining protection plates Not required Installation conditions (recommended) Upstream 5D Downstream 3D Pressure loss <4 bar at Q4 (sizes DN40 to 200 [1 1 /2 to 8 NB]) Negligible for all other sizes Specification transmitter Functional specification Power supply Mains Low voltage DC Supply voltage fluctuations within the specified range have no effect on accuracy Digital Outputs (3 off) Rating m, open collector, galvanically isolated Maximum output frequency 5250 Hz 1 off dedicated to larm / Logic, programmable function 2 off configurable to either Frequency or larm / Logic function Current output WaterMaster Select variant 4 to 20 m or 4 to 12/20 m, galvanically isolated Maximum loop resistance 750 Low alarm 3.6 m, High alarm 21.8 m HRT (option): protocol version 5.7 (HRT register) dditional accuracy Electrical connections 20 mm x 1.5 glands are not supplied 85 to 265 V <7 V 24 V C +10 %/ 30 <7 V 24 V ±30 <0.4 ±0.1 % of reading Temperature coefficient: typically <±20 ppm/ C Non-wetted parts Flange material Carbon steel Housing material Carbon steel Plastic Terminal box material Polycarbonate Cable gland material Plastic (sizes DN40 to DN300 [1 1 /2 to 12 NB]) (sizes DN40 to 200 [1 1 /2 to 8 NB] (sizes DN250 to 300 [10 to 12 NB]) Temperature limitations mbient temperature 20 to 60 C ( 4 to 140 F) Temperature Typically <±10 ppm/ Vel 0.5 mls coefficient Environmental protection Humidity: 0 to 100 % Rating: IP67 (NEM 4X) to 1m (3.3 ft) depth Tamper-proof security Write access prevented by internal switch combined with external security seals Languages English Housing material Powder-coated aluminium with glass window Declaration of Conformance Copies of CE certification available on request 6 DS/FES121/FET141/FET161 EN Rev.

7 Sensor dimensions Max. B Max. DN40 to 200 (1 1/ 2 to 8 NB) full-bore Meter Size Dimensions mm (in) pproximate Weight DN NPS/NB * B kg lb / (5.9) 200 (7.9) (6.5) 200 (7.9) / (7.2) 200 (7.9) (7.9) 200 (7.9) (9.1) 250 (9.8) (9.1) 250 (9.8) (11.0) 300 (11.8) (13.6) 350 (13.8) *Dimensions are approximate and vary depending on flange type DN40 to 200 (1 1/ 2 to 8 NB) full-bore Max. B Max. DN250 to 300 (10 to 12 NB) full-bore Meter Size Dimensions in mm (in) pproximate Weight DN NPS/NB B (<PN25) B (PN25, PN40, SME, CL300) (15.99) 450 (17.7)** 488 (19.2) (18.1) 500 (19.7)** 538 (21.2) * Size is dependent on flange specification Typical tolerances: ** +0/ 10 mm (0.40 in) *** +0/ 20 mm (1.0 in) DN250 to 300 (10 to 12 NB) full-bore kg lb DS/FES121/FET141/FET161 EN Rev. 7

8 Transmitter dimensions Remote transmitter Dimensions in mm (in) Electrical connections Fuse F2 (DC, 24 V C) Power Supply Indicator LED Fuse F1 (C) Internal Earth Screws can be used as a Protective Earth (PE) if required by national standards External Earth Screw >4 mm 2 (<10 WG) Copper Wire C or DC power via a suitable isolator and fuse C and DC power supply connections 8 DS/FES121/FET141/FET161 EN Rev.

9 Ordering information WaterMaster Select FES121 Flowmeter system, optimized / full-bore, remote mount Design Variant digit number , Non-hazardous areas 1 Bore diameter DN40 (1 1 /2 in) DN50 (2 in) DN65 (2 1 /2 in) DN80 (3 in) DN100 (4 in) DN125 (5 in) DN150 (6 in) DN200 (8 in) DN250 (10 in) DN300 (12 in) Liner material Elastomer* Polypropylene** Electrode design FES12 XXX K 1 S 1 S2 B 1 1 X 2 X L 1 Standard 1 Measuring electrodes material Stainless steel 316 S Grounding accessories Standard 1 1 x potential equalizing ring (stainless steel) 3 2 x potential equalizing ring (stainless steel) 4 Process connection type ISO 7005 PN16 EN S2 Process connection material Carbon steel flanges B Usage certifications Standard (without PED) 1 Calibration type Standard calibration*** Temperature range installation / ambient temperature range Standard design / C ( F) 1 Nameplate dhesive label *vailable only with bore diameter code: 250 / 300 **vailable only with bore diameter code: 040 / 050 / 065 / 080 / 100 / 125 / 150 / 200 ***Standard accuracy 0.5 % ±2 mm/second (0.078 in./second) K V Options Continued on page 10 DS/FES121/FET141/FET161 EN Rev. 9

10 Variant digit number , Flowmeter system, optimized / full-bore, remote mount FES12 XXX K 1 S 1 S2 B 1 1 X 2 X L 1 Signal cable length and type Without signal cable 10 m (30 ft.) cable 20 m (60 ft.) cable 30 m (100 ft.) cable Explosion protection certification General purpose (non-ex design) Protection class transmitter / protection class sensor IP67 (NEM 4X) / IP67 (NEM 4X) cable not fitted and not potted 1 Cable conduits M20 x 1.5* Power supply V C (50 Hz) 24 V C or 24 V DC (50 Hz) Input and output signal type HRT + 20 m + pulse + contact output 20 m + pulse + contact output Configuration type / diagnostics type Factory defaults / standard diagnostics 1 Options** Documentation language English (standard) Potable water*** WRS Without Verification type*** Without fingerprint *Cable entries blanked, no glands or conduit adaptors supplied. **dd codes for options. ***Mandatory with Bore diameter code: 040 / 050 / 065 / 080 / 100 / 125 / 150 / 200 / 250 / L Options M5 CW CWY V0 10 DS/FES121/FET141/FET161 EN Rev.

11 transmitter WaterMaster FET141 and module FET161 Select Remote Transmitter Select Module Only Design Variant digit number FET14 FET16 General 1 Temperature range installation / ambient temperature range Standard design / C ( F) 1 Nameplate dhesive label Signal cable length and type Not required 0 Explosion protection certification Without Protection class transmitter Without (FET161 only) IP67 (NEM 4X) (FET141 only) Cable conduits Without (FET161 only) M20 x 1.5 (FET141 only)* Power supply V C (50 Hz) 24 V C or 24 V DC (50 Hz Input and output signal type HRT + 20 m + pulse + contact output 20 m + pulse + contact output Configuration type / diagnostics type X X X X X X X X X Factory defaults / standard diagnostics 1 Options** Documentation language English (standard) *Cable entries blanked, no glands or conduit adaptors supplied. **dd codes for options L M5 Options DS/FES121/FET141/FET161 EN Rev. 11

12 Contact us BB Limited Process utomation Oldends Lane Stonehouse Gloucestershire GL10 3T UK Tel: Fax: Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. BB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. ny reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of BB. Copyright 2012 BB DS/FES121/FET141/FET161 EN Rev ll rights reserved 3KXF206121R1001 Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries Modbus is a registered trademark of the Modbus- ID organization HRT is a registered trademark of the HRT Communication Foundation