Level instruments. Continuous level measurement - Radar transmitters SITRANS LR560. 5/2 Siemens FI Overview.

Transcription

1 Overview onfiguration 2-wire, 78 GHz FMW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (329 ft). enefits rugged stainless steel design for industrial applications 78 GHz high frequency provides very narrow beam, virtually no mounting nozzle noise, and optimal reflection from sloped solids aimer option to direct beam to area of interest, such as draw point of cone lens antenna is highly resistant to product build up air purge connection is included for self-cleaning of extremely sticky solids local display interface (LDI) allows local programming and diagnostics pplication s plug and play performance is ideal for most solids applications, including those with extreme dust and high temperatures to +200 º (+392 ºF). Unique design allows safe and simple programming using the Intrinsically Safe handheld programmer without having to open the instrument s lid. includes an optional graphical local display interface (LDI) that improves setup and operation using an intuitive Quick Start Wizard, and echo profile display for diagnostic support. Startup is easy using the Quick Start wizard with a few parameters required for basic operation. measures practically any solids material to a range of 100 m (328 ft). Key pplications: cement powder, plastic powder/pellets, grain, coal, wood powder, fly ash installation /2 Siemens FI

2 Technical specifications Mode of operation Measuring principle Frequency Minimum detectable distance Maximum measuring range 1) Output nalog output ommunications Fail-safe Performance (according to reference conditions IE ) Maximum measured error (including hysteresis and non-repeatability) Rated operating conditions (according to reference conditions IE ) Installation conditions Radar level measurement 78 GHz FMW 400 mm (1.7") from sensor reference point 40 m (131 ft) version 100 m (328 ft) version 4 to 20 m HRT Optional: PROFIUS P Optional: Foundation Fieldbus Programmable as high, low or hold (Loss of Echo) NE43 programmable Greater of 2 mm (1") or 0.2 % of range from minimum detectable distance to full range Location Indoor/outdoor mbient conditions (enclosure) ambient temperature -40 to +80 (-40 to +176 F) installation category I pollution degree 4 Medium conditions Dielectric constant r >2.0 Process temperature 40 m version -40 to +100 (-40 to +212 F) 100 m version -40 to +200 (-40 to +392 F) Design Enclosure - onstruction 316L/ stainless steel - onduit entry M20x1., or ½" NPT via adapter - Lens material 40m version: PEI 100 m version: PEEK Degree of protection Type 4X/NEM 4X, Type 6/NEM 6, IP68 with lid closed Weight 3.1 kg (6.94 lb) including 3" flange Optional local display interface Graphic LD, with bar graph representing level Process connections Universal flat-faced flanges 2) 3, 4, 6"/80, 100, 10 mm, 304 stainless steel Universal flat-faced flanges 2) 3, 4, 6"/80, 100, 10 mm, 316L/ or 316L/1.443 stainless steel imer flanges 2) 3, 4, 6"/80, 100, 10 mm, polyurethane powder-coated cast aluminum Power supply m/hrt Nominal 24 V D (max. 30 V D) with max. 0 PROFIUS P/Foundation Fieldbus 13. m 9 to 32 V D, per IE ertificates and approvals General S US/, E, FM Radio Europe (R&TTE), F, Industry anada, -TIK Hazardous - Europe TEX II 3G Ex n/nl II T4 Gc - Europe/International TEX II 1D, 1/2D, 2D IEEx SIR X Ex ta III T139 º Da - US/anada FM/S lass II, Div. 1, Groups E, F, G lass III T4 FM/S lass I, Div. 2, Groups,,, D, T4 Programming Intrinsically Safe Siemens handheld programmer Infrared receiver - pprovals for handheld programmer TEX II 1GD Ex ia II T4 Ga IS model: Ex iad 20 T13 Ta = S/FM lass I, II, and III, Div. 1., Gr. -G, T6 Ta=0 Handheld communicator HRT communicator 37/47 P SIMTI PDM, MS, PTware Display (local) Graphic local user interface including quick start wizard and echo profile displays 1) From sensor reference point 2) Universal flange mates with EN (PN16)/SME 16. (10 lb)/jis 2220 (10K) bolt hole pattern. HRT is a registered trademark of the Hart ommunications Foundation. ccessories Handheld programmer Part number: 7ML1930-1K Sun Shield over Part number: 7ML1930-1FK handheld programmer and sun shield cover Siemens FI /3

3 0 Selection and Ordering data 2-wire, 78 GHz FMW radar level transmitter for continuous monitoring of solids in silos to a range ) 7 M L of 100 m (329 ft). Order handheld programmer separately! Measurement and process temperature range 40 m (131 ft) max range, -40 to m (329 ft) max range, -40 to Process connection Universal flat-faced flange fits NSI/DIN/JIS flanges 3" / 80 mm, 304 stainless steel 4" / 100 mm, 304 stainless steel 6" / 10 mm, 304 stainless steel 3" / 80 mm, 316L stainless steel D 4" / 100 mm, 316L stainless steel E 6" / 10 mm, 316L stainless steel F 3" / 80 mm, painted aluminum, with integral aimer 1) G 4" / 100 mm, painted aluminum, with integral H aimer 1) 6" / 10 mm, painted aluminum, with integral aimer 1) J Enclosure (with cable inlet) Stainless Steel, 1 X ½" NPT Stainless Steel, 1 X M20 x 1. (plastic gland included) Pressure rating 0. bar g (7. psi g) maximum 0 3 bar g (40 psi g) maximum 1 Output/communication 4 to 20 m, HRT PROFIUS P Foundation Fieldbus pprovals General Purpose, S US/, Industry anada, F, E, R&TTE, -TIK S/FM lass I, Div. 2, Gr.,,,D, lass II, Div.1, Gr. E,F,G, lass III TEX II 1 D, ½ D, 2 D, 3G Ex n/nl, E, R&TTE, -TIK Local display interface Without LDI (local display interface) 1 With LDI (local display interface) 2 Further designs Order code Please add "-Z" to and specify Order code(s). 2) 3) 4) Plug M12 with mating connector Plug 7/8" with mating connector2) 4) ) cceptance test certificate: Manufacturer's test certificate M to DIN 30, Part 18 and to ISO Inspection ertificate Type 3.1 per EN ) 12 NMUR NE43 compliant, device preset to failsafe <3.6 m 7) N07 Stainless steel tag [69 x 0 mm (2.71 x 1.97")]: Measuring-point number/identification (max. 27 Y1 characters) specify in plain text Instruction manual for HRT device English ) 7ML1998-K01 ) 7ML1998-K31 ) 7ML1998-XF81 manual D containing the complete TEX Quick Selection and Ordering data ) 7 M L wire, 78 GHz FMW radar level transmitter for continuous monitoring of solids in silos to a range of 100 m (329 ft). Order handheld programmer separately! Instruction manual for PROFIUS P device English ) 7ML1998-LT01 ) 7ML1998-LT31 ) 7ML1998-XQ81 manual D containing the complete TEX Quick Instruction manual for Foundation Fieldbus device English ) 7ML1998-LY01 ) 7ML1998-LY31 ) 7ML1998-XR81 manual D containing the complete TEX Quick ccessories Hand Programmer, Intrinsically safe 7ML1930-1K Local display interface 7ML1930-1FJ Sun Shield over 7ML1930-1FK Housing lid with window 7ML1930-1FL One metallic cable gland M20 x 1., rated -40 to +80 (-40 to +176 F), HRT 7ML1930-1P One metallic cable gland M20 x 1., rated -40 to +80 (-40 to +176 F), PROFIUS P 7ML1930-1Q SITRNS RD100 Remote display - see hapter 8 SITRNS RD200 Remote display - see hapter 8 SITRNS RD00 Remote display - see hapter 8 1) Rated to 120 º max. when used with Pressure rating option 1 2) vailable with pproval option only 3) vailable with Enclosure option only 4) vailable with Output/communication options and only ) vailable with Enclosure option only 6) vailable with Pressure rating option 1 only 7) vailable with Output/communication option only HRT is a registered trademark of HRT ommunication Foundation )Subject to export regulations L: N, EN: ER99 D)Subject to export regulations L: N, EN: ER99H Note 1: available with no pressure rating, 0. bar g maximum. Please contact nacc.smpi@siemens.com for special requests. /4 Siemens FI

4 Dimensional drawings dimensions haracteristic curves Temperature derating curve 90 mbient Temperature Process Temperature mbient Temperature (º) m version 100 m version Process Temperature (º) temperature derating curve Siemens FI /

5 Schematics cable gland (or NPT cable entry) cable shield (if used) onnect the wires to the terminals as shown: the polarity is identified on the terminal block. Notes: 1. Depending on the approval rating, glands and plugs may be supplied with your instrument. 2. D terminal shall be supplied from a source providing electrical isolation between the input and output, to meet the applicable safety requirements of IE ll field wiring must have insulation suitable for rated input voltages. 4. Use shielded twisted pair cable (14 to 22 WG) for HRT version.. Separate cables and conduit may be required to conform to standard instrumentation wiring practices or electrical codes. connections /6 Siemens FI