MAGFLO MAG 5100 W Benefits Application Flow Measurement Mode of operation Function Integration

Transcription

1 Benefits N5 to N2000 (½" to 78") Connection flanges NSI and Ebonite Hard Rubber liner for all water applications EPM liner with drinking water approvals Hastelloy Integrated grounding and measuring electrodes Increased low flow accuracy for water leak detection, due to coned liner design [7ME6520 N 5 to 300 (/2" to 2")] rinking water approvals Suitable for direct burial and constant flooding Build-in length according to ISO 3359, sizes up to N400 (6") Easy commissioning, SENSORPROM unit automatically up-loads calibration values and settings esigned so that patented in-situ verification can be conducted Using SENSORPROM fingerprint pplication The main applications of the MGFO electromagnetic flow sensors can be found in the following fields: Water abstraction Water treatment Water distribution network (leak detection management) Custody transfer water meters Irrigation Waste water treatment Filtration plant (e.g. reverse osmosis and ultra filtration Industrial Water applications Mode of operation The flow measuring principle is based on Faradays aw of Electromagnetic Induction where the sensor converts the flow into an electrical voltage proportional to the velocity of the flow. Function Highly resistant to a wide range of chemicals Meets EEC directives: PE 204/68/EU pressure directive for EN092- flanges Simple onsite s/b or factory upgrade to IP68/NEM 6P of standard sensor Integration The complete flow meter consists of a flow sensor and an associated transmitter MGFO MG 5000 or MG ocal regulation may restrict the use of this product below the conditions quoted. imiting conditions refer to standard connections only. In the interests of development and improvement of the product, we reserve the right to change the specification.

2 esign Full Bore Sensor Ebonite iner Technical Specifications Nominal size For all sizes N25 to N2000 (" to 78") Measuring Principle Excitation frequency Process Connection Flanges NSI B 6.5 C-207 Rated Operation Conditions mbient temperature Sensor With Compact transmitter MG 5000/6000 Operating pressure Enclosure rating Standard Option Pressure rop Medium conditions Electromagnetic Induction N25 to N65 (" to 2.52"): 2.5 Hz/5Hz N80 to N50 (3" to 6"): 6.25 Hz/7.5 Hz Class 50: N25 to N600 (" to 24") Raised face Class : N700 to N2000 (28" to 78") Flat face -40 to +70 C (-40 to +58 F) -20 to +60 C (-4 to +40 F) N25 to N50 (" to 2") / 0.0 to 40 bar (0.5 to 580 psi) N65 to N200 (2.5" to 48") / 0.0 to 6 bar (0.5 to 232 psi) N400 to N2000 (54" to 78") / 0.0 to 0 bar (0.05 to 45 psi) IP67 to EN / NEM 4x/6 ( mh 2 O for 30 minutes) IP68 to EN / NEM 6P (0 mh 2 O continuously) Insignificant Temperature of medium -0 to +70ºC {4 to +58ºF) N200 to N200 (8" to 48"): 3.25 Hz/3.75 Hz N400 to N2000 (54" to 78"):.5625 Hz/.875 Hz EMC esign Weight Material Housing and flanges Terminal box Measuring pipe iner Electrodes Grounding electrodes standard Certificates and Custody Transfer (only together with MG 5000/6000 CT) 204/30/EU See dimensional drawings Carbon Steel STM 05, with corrosion-resistant coating Standard Fibre glass reinforced polyamide ISI 304 (.430) Ebonite Hard Rubber (hydro carbon resistent) U General Safety, FM Class, iv 2, Groups,B,C,, FM Class, Zone 2, Groups IIC NSF/NSI Standard 6 (Includes nnex G) (Cold Water, US) 283

3 EPM iner Technical Specifications esign Coned Sensor (octagon liner) Coned Sensor Full Bore Sensor Nominal size N5 to N40 (/2" to.5") N50 to N300 (2" to 2") For all sizes N350 to N200 (4" to 48") Measuring Principle Excitation frequency Process Connection Flanges NSI B 6.5 C-207 Rated Operation Conditions mbient temperature Sensor With Compact transmitter MG 5000/6000 Operating pressure Enclosure rating Standard Option Pressure rop Medium conditions EMC esign Weight Material Housing and flanges Terminal box Measuring pipe iner Electrodes Grounding electrodes standard Certificates and Custody Transfer (only together with MG 5000/6000 CT) Electromagnetic Induction N5 to N65 (/2" to 2.5"): 2.5 Hz/5Hz N80 to N50 (3" to 6"): 6.25 Hz/7.5 Hz N200 to N300 (8" to 2"): 3.25 Hz/3.75 Hz N350 to N200 (4" to 48"):.5625 Hz/.875 Hz Class 50: N5 to N300 (/2" to 2") Flat face N350 to 600 (4" to 24") Raised face Class : N700 to 200 (28" to 48") Flat face -40 to +70 C (-40 to +58 F) -20 to +60 C (-4 to +40 F) N5 to N40 (/2" to.5") / 0.0 to 40 bar (0.5 to 580 psi) N50 to N300 (2" to 2") / 0.03 to 20 bar (0.44 to 290 psi) N350 to N200 (4" to 48") / 0.0 to 6 bar (0.05 to 232 psi) IP67 to EN / NEM 4x/6 ( mh 2 O for 30 minutes) IP68 to EN / NEM 6P (0 mh 2 O continuously) N5 to N25 (/2" to "): Max 20 mbar (0.29 psi) at m/s (3 ft/s) N40 to N300 (2" to 2"): Max 25 mbar (0.36 psi) at 3 m/s (0 ft/s) N350 to N200 (4" to 48") Insignificant Temperature of medium -0 to +70ºC {4 to +58ºF) 204/30/EU See dimensional drawings Carbon Steel STM 05, with corrosion-resistant coating Standard Fibre glass reinforced polyamide ISI 304 (.430) Ebonite Hard Rubber (hydro carbon resistent) U General Safety, FM Class, iv 2, Groups,B,C,, FM Class, Zone 2, Groups IIC NSF/NSI Standard 6 (Includes nnex G) (Cold Water, US) 284

4 Ebonite iner (½ NPT) N25 to N2000 ( to 78 ) Nominal Size Weight [mm] [inch] [inch] [inch] [lbs] ½ ½

5 EPM iner (½ NPT) (½ NPT) (½ NPT) N5 40 (½" ½") N 300 (2" 2") N (4" 48") Nominal Size Weight [mm] [inch] [inch] [inch] [lbs] 5 ½ ½ ½

6 Model Code MG 500 W ESCRIPTION SIZE (IN.) COE No FNGE Sensor MG 500 W - Hard Rubber iner (ebonite) iner: Ebonite 7ME6580-2J # NSI Electrodes: Hastelloy C ½ 7ME6580-2RJ # NSI Enclosure: NEM 4X, NEM 6* 2 7ME6580-2YJ # NSI (3-ft. submersible up to 72 hours) 2 ½ 7ME6580-2FJ # NSI Flange Material: Carbon Steel 3 7ME6580-3MJ # NSI Sizes to 24 : NSI 6.5B, Class ME6580-3TJ # NSI Sizes 28 to 48 : C-207, Class 5 7ME6580-4BJ # NSI Max Temp: 58ºF (70 C) 6 7ME6580-4HJ # NSI 8 7ME6580-4PJ # NSI *NEM 6P when applying submersible kit part #EC ME6580-4VJ # NSI 2 7ME6580-5J # NSI Code numbers in Bold Type indicate items ordinarily in stock. 4 7ME6580-5KJ # NSI Consult factory for confirmation. 6 7ME6580-5RJ # NSI 8 7ME6580-5YJ # NSI 20 7ME6580-6FJ # NSI 24 7ME6580-6PJ # NSI 28 7ME6580-6Y ME ME6580-7H ME6580-7M ME6580-7R ME6580-7U ME6580-7V ME6580-8B

7 Model Code MG 500 W ESCRIPTION SIZE (IN.) COE No FNGE Sensor MG 500 W /2 7ME6520-VJ # NSI iner: EPM 7ME6520-2J # NSI Electrodes: Hastelloy C ½ 7ME6520-2RJ # NSI Enclosure: NEM 4X, NEM 6* 2 7ME6520-2YJ # NSI (3-ft. submersible up to 72 hours) 2 ½ 7ME6520-3FJ # NSI Flange Material: Carbon Steel 3 7ME6520-3MJ # NSI Sizes /2 to 24 : NSI 6.5B, Class ME6520-3TJ # NSI Sizes 28 to 48 : C-207, Class 5 7ME6520-4BJ # NSI Max Temp: 58ºF (70 C) 6 7ME6520-4HJ # NSI 8 7ME6520-4PJ # NSI *NEM 6P when applying submersible kit part #EC ME6520-4VJ # NSI 2 7ME6520-5J # NSI Code numbers in Bold Type indicate items ordinarily in stock. 4 7ME6520-5KJ # NSI Consult factory for confirmation. 6 7ME6520-5RJ # NSI 8 7ME6520-5YJ # NSI 20 7ME6520-6FJ # NSI 24 7ME6520-6PJ # NSI 28 7ME6520-6Y ME ME6520-7H ME6520-7M ME6520-7R ME6520-7U ME6520-7V ME6520-8B