Tripp Lite Network-Grade Power Distribution Units (PDUs)

Transcription

1 T N L P P L T O N U L L T N # Tripp Lite Network-rade Power istribution Units (PUs) Tripp Lite Network-rade PUs are extremely reliable multiple-outlet strips that distribute power from a UPS system, generator or wall outlet to multiple devices. Tripp Lite offers four distinct types of rackmount PUs: asic, Metered, Monitored and Switched. PU Type Selector Use this table to select a suitable PU type for the required application, then use the input/output table on page 2 to select a specific PU model. eature Multiple Outlets Long nput Power ord Load Meter enefit Provide reliable power distribution from a UPS system, generator or utility source to multiple devices. Models with high-amperage plugs convert a high-amperage outlet into multiple low-amperage outlets. asic PUs (Page 3) Metered PUs (Page 4) Monitored PUs (Page 5) Switched PUs (Pages 6-7) ncreases installation flexibility by allowing devices to be located far from an input power source. isplays connected equipment load in amps to prevent overloads and safely optimize load levels. Network nterface Provides remote monitoring and alerts to prevent overloads that cause downtime. Supports centralized management via included Powerlert NMS or a third-party network management system. Remote Outlet ontrol liminates costly service calls by rebooting locked devices from any location. ncreases runtime of critical devices by turning off nonessential loads during power failures. See Page 8 for PU pplications o to to access Tripp Lite's interactive PU selector guide. Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

2 PU Model Selector Select a PU by cross-referencing the source outlet and PU outlets. (See page 1 to choose a PU type asic, Metered, Monitored or Switched.) Source Outlet Type orm actor Recommended PU Models with Outlet Quantity and Type asic PUs (Page 3) Metered PUs (Page 4) Monitored PUs (Page 5) Switched PUs (Pages 6-7) 5-15R North merica 1V ( V / 15) 5-15P PU Plug orizontal PU1215 ( R) PUNV ( ) * PUM15 ( R) PUMN15 (8 5-15R) PUM15TNT (8 5-15R) (TS) PUM15T (8 5-15R) (TS) Vertical PU1415 ( R) PUV15 ( R) PUMV15 ( R) PUMNV15 ( R) PUMV15NT ( /R) 5-15/R North merica 1V ( V / ) 5-15P or 5-P PU Plug orizontal PU12 ( /R) PUNV ( ) * PUM ( /R) PUMN (8 5-15/R) PUMTNT ( /R) (TS) PUMT ( /R) (TS) Vertical PUV ( /R) PU40TUL ( /R) (UL) PUMV ( 5-15/R) PUMNV ( /R) PUMVNT ( /R) PUMV40 ( /R) (UL) L5-R North merica 1V ( V / ) L5-P PU Plug orizontal PU12T ( /R) PUNV ( ) * PUM ( /R) PUMN (8 5-15/R) PUMTNT ( /R) (TS) PUMT ( /R) (TS) Vertical PU14T ( /R) PU40TUL ( /R) (UL) PUMV ( 5-15/R) PUMNV ( /R) PUMVNT ( /R) PUMV40 ( /R) (UL) L5-30R North merica 1V ( V / 30) L5-30P PU Plug L6-R North merica 8V (0-250V / ) L6-P PU Plug L6-30R North merica 8V (0-250V / 30) L6-30P PU Plug orizontal PU2430 ( R) PUM30NT ( /R) Vertical PU2430 ( R) PUMV30 ( /R) PUMNV30 ( /R) PUMV30NT ( /R) orizontal PUNV ( ) * PUMVNT (8 13) PUMVTNT ( ) (TS) Vertical PUNV ( )* PUMVV ( ) PUMNVV ( ) PUMVVNT ( ) orizontal PU1230 ( ) PUM30VNT (16 13) PUM30V19NT ( ) Vertical PUV30V ( ) PUMV30V ( ) PUMNV30V ( ) PUMV30VNT ( ) Outlet Varies Worldwide (Voltage Varies) PU Plug Varies 13 orizontal PUNV ( )* V / 16 / PU Plug Varies PUM15VNT (8 13) 0-250V / 15 / 14 Plug PUMVNT (8 13) 0-250V / / Plug PUMVTNT ( ) (TS) 0-250V / / PU Plug Varies 32 lue P+ 6-R (P 44 Protection Rating) 19 Vertical PUNV ( )* V / 16 / PU Plug Varies PUMVV ( ) 0-250V / / Plug PUMNVV ( ) 0-250V / / Plug PUMVVNT ( ) 0-250V / / Plug PUMV32VNT ( ) 0-250V / 32 lue P+ 6-P Plug (P 44 Protection Rating) * PU12 can be substituted for PUNV. PU12 requires a user-supplied input power cord. (TS) PU includes dual inputs and automatic transfer switch. PUMVTNT requires two user supplied input power cords. (UL) PU includes dual input cords and dual independent power circuits. Power ords & ccessories Model nput Plug Output Receptacle Length Rating escription P P 13 6 ft. 10 / V ord P P 13 2 ft. 15 / V ord P P 13 6 ft. 15 / V ord P P ft. 15 / V ord P P ft. 10 / V ord P P 13 2 ft. 15 / V ord (5-Pack) P P ft. 15 / V ord P P ft. / V ord P P L5-R 6 in. / V dapter P L5-P ft. / V ord P L5-30P L5-R 2 ft. / V ord w/reaker P L6-P ft. / 0-250V ord P L6-P ual L6-R 1 ft. / 0-250V Splitter P L6-30P ual L6-30R 1 ft. 30 / 0-250V Splitter P ft. 10 / V ord (5-Pack) P ft. 15 / V ord P ft. 15 / V ord P ft. 15 / V ord P ft. 15 / V ord P ft. 15 / V ord P ft. 15 / V ord P ft. 15 / V ord P ft. / V ord P ft. / V ord P ft. / V ord P S ft. 13 / 0-250V ord Model nput Plug Output Receptacle Length Rating escription P S ft. 13 / 0-250V ord P / ft. 16 / 0-250V ord P / ft. 16 / 0-250V ord UNPLUNT 14 Wonpro Universal 1 in. 10 / V dapter Model escription NVROSNS Temperature/humidity/alarm sensor for Monitored or Switched PU. P350-10N pack of reusable black hook-and-loop cable ties. 10 x 5/8. PUMVROTTRKT llows vertical PU outlets to face rear of rack for improved airflow. (ncluded with vertical Monitored and Switched PUs.) SNMPWR onverts PUM15T or PUMT to Switched PU. Using PUs with Tripp Lite UPS Systems The most common PU application is distributing power from a UPS system to connected equipment. The table below shows PU plug types and a partial list of Tripp Lite UPS systems compatible with that plug type. PU Plug Type ompatible SmartPro UPS Systems ompatible SmartOnline UPS Systems 5-15P ll 500-5,000V (1V) ll 750-5,000V & Select 6-16kV (1V) 5-P Select 2,0-5,000V (1V) ll 2,0-5,000V & Select 6-16kV (1V) L5-P Select 2,0-2,600V (1V) ll 2,0V (1V) L5-30P Select 3,000V (1V) ll 3,000V (1V) L6-P Select 5,000V ll 5,000V & Select 6-16kV L6-30P ll 5,000V ll 5,000V & Select 6-16kV 14 ll 500-5,000V (230V) ll 1,000-3,000V (230V) Select 2,0V & ll 3,000-5,000V (230V) Select 2,0-3,000V (230V) & Select 8-16kV 2 Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

3 asic PUs Network-rade Plug and Outlets Long nput Power ord Metal Rackmount abinet Multiple Mounting Options asic PUs distribute power from a UPS system, generator or utility wall outlet to multiple devices. Network-grade plug and outlets provide reliable power distribution. Long input power cord reaches distant outlets and provides placement flexibility. Switchfree design prevents accidental shutdown. urable metal cabinet maximizes safety and supports standard 19-inch rackmount installation and surface mounting (walls, counters, floors, desktops, ceilings and more). orizontal PUs are optimized for 1U rackmount installation. Vertical PUs are optimized for 0U (vertical) rackmount installation via mounting brackets or toolless mounting buttons. TURS PU1215 PU12 & PU12T have 5-15/R outlets PU2430 PU1230 PU1415 PU14T has 5-15/R outlets PU40TUL PUNV PU12 has inlet for detachable input cord (user-supplied) PUV30V PUV15 PUV has 5-P plug and 5-15/R outlets Outlets nput ord and Plug ircuit reaker Metal abinet Mounting ardware rounding Lug Plug dapters ual ircuits SPTONS Nominal Maximum Output nput Outlets ront Rear nput ord imensions 1U 0U (Vertical) Toolless Model Voltage nput urrent anks Plug (Quantity & Type) () Outlets Outlets Length ( x W x ) Rackmount Rackmount Mounting orizontal PUs PU1215 1V 15 1 x P 13 (5-15R) ft x 17.5 x 4.5 in. n/a PU12 1V 1 x 5-P 13 (5-15/R) ft x 17.5 x 4.5 in. n/a PU12T 1V 1 x L5-P 13 (5-15/R) ft x 17.5 x 4.5 in. n/a PU2430 1V 30 () 2 x 15 L5-30P 24 (5-15R) ft x 17.5 x 4.5 in. n/a PU V 16 2 x 16 None ( inlet) () 14 (12 13 / 2 19) / 2 19 n/a 1.75 x 17.5 x 4.25 in. n/a PUNV V 16 2 x 16 6 Plugs ( inlet) () 14 (12 13 / 2 19) / ft x 17.5 x 4.25 in. n/a PU1230 8V 30 () 2 x 15, 4 x 10 L6-30P 18 (16 13 / 2 19) 4 13 / ft x 17.5 x 5.25 in. n/a Vertical PUs PU1415 1V 15 1 x P 14 (5-15R) n/a ft x x 2.25 in. n/a PUV15 1V 15 1 x P 12 (5-15R) 12 n/a 15 ft x 36 x 1.25 in. n/a PU14T 1V 1 x L5-P 14 (5-15/R) n/a ft x x 2.25 in. n/a PUV 1V 1 x 5-P 12 (5-15/R) 12 n/a 15 ft x 36 x 1.25 in. n/a PU40TUL 1V 2 x 2 x 2 x L5-P / 5-P () 40 (5-15/R) 40 n/a 2 x 10 ft. 3 x 71 x 1.5 in. n/a PUV30V 8V 30 () 2 x 15 L6-30P 38 (32 13 / 6 19) 38 n/a 10 ft. 3.5 x x 2.25 in. n/a () gency-derated input current is 80% of maximum. () PU12 has inlet. User-supplied input cord with 19 connection and appropriate plug type required to connect to source. () PUNV includes inlet, plus five adapters which terminate in 14, 5-15P, 5-P, L5-P or L6-P. () PU40TUL has dual circuits, cords and twist-lock plugs with two adapters to convert to straight-blade plugs. () 5-15/R outlets are compatible with 5-15P or 5-P plugs. ertifications vary by model. Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

4 Metered PUs Load Meters for Local urrent Monitoring Network-rade Plug and Outlets Long nput Power ord Metal Rackmount abinet Multiple Mounting Options Metered PUs distribute power from a UPS system, generator or utility wall outlet to multiple devices. One or more load meters display total current draw at the rack, allowing full PU usage without overloading circuits. Network-grade plug and outlets provide reliable power distribution. Long input power cord reaches distant outlets and provides placement flexibility. Switch-free design (or covered switch) prevents accidental shutdown. urable metal cabinet maximizes safety and supports standard 19-inch rackmount installation and surface mounting (walls, counters, floors, desktops, ceilings and more). orizontal PUs are optimized for 1U rackmount installation. Vertical PUs are optimized for 0U (vertical) rackmount installation via mounting brackets or toolless mounting buttons. TURS PUM15 PUM has L5-P plug, 5-P plug adapter and 5-15/R outlets PUMV15 PUMV has L5-P plug, 5-P plug adapter and 5-15/R outlets K K PUMV30V PUMV30 has /R outlets PUMVV has inlet, detachable cord with L6-P, 8 additional 13 outlets and single meter PUMV40 PUM15T PUMT Load Meter Outlets nput ord and Plug ircuit reaker Mounting ardware Metal abinet rounding Lug Plug dapter ual ircuits overed Switch K ord Retention racket SPTONS Nominal Maximum Output nput Outlets ront Rear nput ord imensions 1U 0U (Vertical) Toolless Model Voltage nput urrent anks Plug (Quantity & Type) () Outlets Outlets Length ( x W x ) Rackmount Rackmount Mounting orizontal PUs PUM15 1V 15 1 x P 13 (5-15R) ft x 17.5 x 4.5 in. n/a PUM15T 1V () 15 1 x 15 2 x 5-15P 8 (5-15R) 8 n/a 2 x 12 ft x 17.5 x 14.5 in. n/a n/a PUM 1V 1 x L5-P / 5-P () 13 (5-15/R) ft x 17.5 x 4.5 in. n/a PUMT 1V () 1 x 2 x L5-P / 5-P () 16 (5-15/R) x 12 ft x 17.5 x 14.5 in. n/a n/a Vertical PUs PUMV15 1V 15 1 x P 16 (5-15R) 16 n/a 15 ft. 1.5 x 48 x 1.5 in. n/a PUMV 1V 1 x L5-P / 5-P () (5-15/R) n/a 15 ft x 60 x 1.25 in. n/a PUMV40 1V 2 x 2 x 2 x L5-P / 5-P () 32 (5-15/R) 32 n/a 2 x 10 ft. 3 x x 1.5 in. n/a PUMV30 1V 30 () 2 x L5-30P 24 (5-15/R) 24 n/a 10 ft x x 2.25 in. n/a PUMVV 8/230V () 1 x L6-P ( inlet) 38 (32 13 / 6 19) 38 n/a 10 ft x x 2.25 in. n/a PUMV30V 8V 30 () 2 x 15 L6-30P 30 (24 13 / 6 19) 30 n/a 10 ft. 3.5 x x 2.25 in. n/a () Primary input (fixed cord) tolerances: V, 45-65z. Outside this range, PU switches to secondary input (detachable cord) if within V range. Ls indicate active input. () gency-derated input current is 80% of maximum. () ncludes twist-lock plug with adapter to convert to straight-blade plug. PUMT includes two plugs and two adapters. () PUMV40 has dual circuits, cords and twist-lock plugs with two adapters to convert to straight-blade plugs. () 5-15/R outlets are compatible with 5-15P or 5-P plugs. ertifications vary by model. 4 Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

5 Remote Monitoring and Programmable lerts entralized Management Support Powerlert Network Management System nvironmental Monitoring Support Network-Upgradable irmware Load Meters for Local urrent Monitoring Network-rade Plug and Outlets Long nput Power ord Metal Rackmount abinet Multiple Mounting Options Monitored PUs distribute power from a UPS system, generator or utility wall outlet to multiple devices. uilt-in thernet interface allows users to manage PUs over the P network via SNMP, standard Web browser or telnet. Programmable alerts monitor load thresholds and report alarm conditions via automated , SMS and SNMP alerts. PUs support centralized management through included Powerlert Network Management System or a third-party network management system. Temperature, humidity, alarms and contact closure interface can be monitored through optional NVROSNS. ll PU parameters and actions can be logged. One or more load meters display the total current draw at the rack, allowing full PU usage without overloading circuits. Network-grade plug and outlets provide reliable power distribution. Long input power cord reaches distant outlets and provides placement flexibility. Switch-free design prevents accidental shutdown. urable metal cabinet maximizes safety and supports standard 19-inch rackmount installation and surface mounting (walls, counters, floors, desktops, ceilings and more). orizontal PUs are optimized for 1U rackmount installation. Vertical PUs are optimized for 0U (vertical) rackmount installation via mounting brackets or toolless mounting buttons. ncluded PU rotation brackets allow outlets to face rear of rack for improved airflow (optional). TURS Monitored PUs PUMN15 PUMN PUMNV15 PUMNV PUMNV30 PUMNVV Network nterface nput Plug Load Meter Outlets nput ord Mounting ardware Metal abinet Plug dapter Power nlet ord Retention racket PUMNV30V SPTONS Nominal Maximum Output nput Outlets nput ord imensions 1U 0U (Vertical) Toolless Model Voltage nput urrent anks Plug (Quantity & Type) () Length ( x W x ) Rackmount Rackmount Mounting orizontal PUs PUMN15 1V 15 () 1 x P 8 (5-15R) 12 ft x 17.5 x 6.25 in. n/a n/a PUMN 1V () 1 x L5-P / 5-P () 8 (5-15/R) 12 ft x 17.5 x 6.25 in. n/a n/a Vertical PUs PUMNV15 1V 15 () 1 x P 16 (5-15R) 10 ft x 49 x 2.25 in. n/a PUMNV 1V () 1 x L5-P / 5-P () 24 (5-15/R) 10 ft x 63 x 2.25 in. n/a PUMNV30 1V 30 () 2 x () L5-30P 24 (5-15/R) 10 ft x 70 x 2.25 in. n/a PUMNVV 8/230V () 1 x L6-P ( inlet) 24 ( 13 / 4 19) 10 ft x 64 x 2.25 in. n/a PUMNV30V 8V 30 () 2 x 15 () L6-30P 24 ( 13 / 4 19) 10 ft x 70 x 2.25 in. n/a () gency-derated input current is 80% of maximum. () Multimode meter displays total load for PU or for each output bank. () ncludes twist-lock plug with adapter to convert to straight-blade plug. () 5-15/R outlets are compatible with 5-15P or 5-P plugs. ertifications vary by model. Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

6 Switched PUs Remote ontrol of ndividual Outlets Programmable Load Ramping and Shedding Remote Monitoring and Programmable lerts entralized Management Support Powerlert Network Management System nvironmental Monitoring Support Network-Upgradable irmware Load Meters for Local urrent Monitoring Network-rade Plug and Outlets Long nput Power ord Metal Rackmount abinet Multiple Mounting Options Switched PUs distribute power from a UPS system, generator or utility wall outlet to multiple devices. uilt-in thernet interface allows users to manage PUs over the P network via SNMP, standard Web browser or telnet. ach PU outlet can be switched on or off remotely, preventing costly service calls by allowing unresponsive devices to be rebooted over the network. Outlets can also be locked out to prevent connection of unauthorized equipment loads. Programmable load shedding extends the runtime of critical systems during power failures by automatically turning off nonessential devices. Programmable load ramping avoids current inrush overloads and ensures proper startup sequencing by determining the power-on delay of each outlet. Programmable alerts monitor load thresholds and report alarm conditions via automated , SMS and SNMP alerts. PUs support centralized management through included Powerlert Network Management System or a third-party network management system. Temperature, humidity, alarms and contact closure interface can be monitored through optional environmental sensor. ll PU parameters and actions can be logged. Load meter displays the total current draw at the rack, allowing full PU usage without overloading circuits. Networkgrade plug and outlets provide reliable power distribution. Long input power cord reaches distant outlets and provides placement flexibility. Switch-free design prevents accidental shutdown. urable metal cabinet maximizes safety and supports standard 19-inch rackmount installation and surface mounting (walls, counters, floors, desktops, ceilings and more). orizontal PUs are optimized for 1U or 2U rackmount installation. Vertical PUs are optimized for 0U (vertical) rackmount installation via mounting brackets or toolless mounting buttons. ncluded PU rotation brackets allow outlets to face rear of rack for improved airflow (optional). SPTONS Nominal Maximum Output nput Outlets nput ord imensions 1U or 2U 0U (Vertical) Toolless Model Voltage nput urrent anks Plug (Quantity & Type) () Length ( x W x ) Rackmount Rackmount Mounting orizontal PUs PUM15TNT 1V () 15 1 x 15 2 x 5-15P 8 (5-15R) 2 x 12 ft x 17.5 x 14.5 in. 1U n/a n/a PUMTNT 1V () 1 x 2 x L5-P / 5-P () 16 (5-15/R) 2 x 12 ft x 17.5 x 14.5 in. 1U n/a n/a PUM30NT 1V 30 () 2 x () L5-30P 16 (5-15/R) 10 ft. 3.5 x 17.5 x 12.5 in. 2U n/a n/a PUM15VNT 8/230V 15 () 1 x inlet 8 (13) 6.5 ft x 17.5 x in. 1U n/a n/a PUMVTNT 8/230V () () 1 x 2 x inlet () 10 (8 13 / 2 19) () n/a () 1.75 x 17.5 x in. 1U n/a n/a PUMVNT 8/230V () 1 x L6-P ( inlet) 8 (13) 8.5 ft x 17.5 x in. 1U n/a n/a PUM30VNT 8V 30 () 2 x 15 () L6-30P 16 (13) 10 ft. 3.5 x 17.5 x 12.5 in. 2U n/a n/a PUM30V19NT 8V 30 () 1 x 15, 1 x () L6-30P 14 (8 13 / 6 19) 15 ft. 3.5 x 17.5 x 12.5 in. 2U n/a n/a Vertical PUs PUMV15NT 1V 15 () 1 x P 16 (5-15/R) 10 ft x 49 x 2.25 in. n/a PUMVNT 1V () 1 x L5-P / 5-P () 24 (5-15/R) 10 ft x 63 x 2.25 in. n/a PUMV30NT 1V 30 () 2 x () L5-30P 24 (5-15/R) 10 ft x 70 x 2.25 in. n/a PUMVVNT 8/230V () 1 x L6-P ( inlet) 24 ( 13 / 4 19) 10 ft x 64 x 2.25 in. n/a PUMV30VNT 8V 30 () 2 x 15 () L6-30P 24 ( 13 / 4 19) 10 ft x 70 x 2.25 in. n/a PUMV32VNT 230V 32 2 x 15 () 32 lue P+ 6-P () 24 ( 13 / 4 19) 10 ft x 70 x 2.25 in. n/a () PU has primary and secondary inputs, automatically switching to secondary input if primary input s voltage or frequency deviates from designated operating range. Two Ls marked primary and secondary indicate active input source. PUMVTNT includes button to select 8V or 230V operation. () gency-derated input current is 80% of maximum. () Multimode meter displays total load for PU or for each output bank. () PUMVNT includes twist-lock plug with adapter to convert to straight-blade plug. PUMTNT includes two plugs and two adapters. () PUMVTNT has two inlets. User-supplied input cords with 19 connections and appropriate plug types required to connect to sources. () Splash-proof plug (P 44 protection rating). () 5-15/R outlets are compatible with 5-15P or 5-P plugs. () 19 outlets are not switched. ertifications vary by model. RMOT OUTLT ONTROL PPLTONS TP/P ON Switched PU O TP/P Switched PU Power ycle Remote omputer ritical Load Non-ritical Load Remote omputer Locked/rozen evice Load Shedding Remote Rebooting TURS PUM15TNT PUMTNT 6 Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

7 Switched PUs TURS 15 PUM30NT PUM15VNT K PUMVTNT PUM30V19NT 15 PUMVNT PUM30VNT PUMV15NT PUMVNT PUMV30NT PUMVVNT Network nterface nput Plug Load Meter Switched Outlets nput ord Mounting ardware Metal abinet Plug dapter Power nlet ord Retention racket K Unswitched Outlets PUMV30VNT PUMV32VNT has 32 lue P+ 6-P plug with P 44 protection rating Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US

8 PU pplications Tripp Lite PUs can be used for additional applications not discussed here. ontact Tripp Lite Technical Support at for assistance. dd More Outlets to a UPS System pplicable PUs: ll Models 1 The PU plugs into an outlet on the UPS system. 2 The PU increases the total number of outlets powered by the UPS system. onvert a Single igh-mperage Outlet to Multiple Low-mperage Outlets pplicable PUs: Models with igh-mperage Plug or nlet 1 The PU plugs into a high-amperage outlet on the UPS system. 2 The PU spreads the high-amperage input among multiple lowamperage outlets, allowing the UPS system to power multiple devices from a single outlet. istribute acility UPS or enerator Power to Multiple Outlets pplicable PUs: ll Models 1 The PU plugs into a wall outlet supported by facility UPS or generator power. 2 The PU distributes power to equipment via multiple outlets. Provide ndependent Power Sources for evices with Redundant Power Supplies pplicable PUs: PU40TUL, PUMV40 PUs with dual power circuits provide an efficient power distribution solution for equipment with redundant power supplies, combining the advantages of two separate high-amperage PUs without the added expense, space requirements and management complexity. nput cords, breakers and outlets are color coded to match each independent circuit, simplifying cable management. 1 ach PU input cord plugs into an independent UPS, utility or generator power source. 2 The PU distributes power to equipment with redundant power supplies, providing an independent power source for each power supply. (The PU also works with equipment that does not have redundant power supplies.) Provide Redundant Power Sources for evices without Redundant Power Supplies pplicable PUs: PUM15T, PUMT, PUM15TNT, PUMTNT, PUMVTNT utomatic transfer switch (TS) PUs eliminate equipment downtime by automatically switching to a secondary power source if the primary source fails or requires maintenance. ual inputs can be connected to two utility sources, two generator sources, two UPS sources or any combination. 1 The primary input connects to the primary UPS system, which must be an on-line UPS system. 2 The secondary input connects to the secondary UPS system. deally, the UPS systems should be connected to separate circuits. 3 The PU monitors voltage and frequency, automatically switching to the secondary input if the primary input deviates from the designated operating range. Make ny On-Line UPS System ot-swappable pplicable PUs: PUM15T, PUMT, PUM15TNT, PUMTNT, PUMVTNT 1 The primary input connects to an on-line UPS system. 2 The secondary input connects to a wall outlet. 3 f the UPS system is taken offline for maintenance, repair or replacement, the PU keeps the load powered by automatically switching from the primary input to the secondary input. When the UPS system is restored, the PU will switch back to the primary input. Monitor Load Levels at the Rack pplicable PUs: ll Metered, Monitored and Switched Models onnecting additional equipment to a PU can overload the PU or the supply circuit, causing equipment downtime. PUs display load levels in real time, allowing additional equipment to be connected safely. 1 The PU s load meter displays the connected equipment load in amps. (Switched and Monitored PUs also support remote load monitoring.) 2 dditional equipment can be connected without overloading the PU. (etermine equipment power requirements before connecting.) Monitor Load Levels Remotely pplicable PUs: ll Monitored and Switched Models 1 The PU s network interface connects to an thernet jack. 2 Remote users can monitor load levels remotely to avoid overloads. Users can also set alarm thresholds and receive alerts via SNMP, or SMS text message when thresholds are exceeded. ontrol ndividual Outlets Remotely pplicable PUs: ll Switched Models 1 The PU s network interface connects to an thernet jack. 2 Remote users can switch each of the PU s outlets on or off via SNMP, Web or telnet. enefits include rebooting locked devices to avoid costly service calls and turning off nonessential loads during power failures to extend battery backup runtime for critical systems. entralize Power Management pplicable PUs: ll Monitored and Switched Models 1 The PU s network interface connects to an thernet jack. 2 The network manager installs Powerlert Network Management System (included with Monitored and Switched PUs) or a third-party network management system (user-supplied) on a workstation connected to the P network. 3 The network manager uses Powerlert Network Management System to auto-discover up to 250 PUs and UPS systems, which can then be managed from a central location. ll PU functions are available through Powerlert Network Management System. o to to access Tripp Lite s interactive PU selector guide. 8 Tripp Lite World eadquarters 1111 W. 35th Street, hicago, L US opyright 09 Tripp Lite. ll rights reserved. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice