User Manual. Power Distribution Unit th Ave E #400, Shakopee, MN K

Transcription

1 User Manual Power istribution Unit th ve #400, Shakopee, MN K

2 Table of ontents Model List...1 PU Naming onvention... 1 Package ontents... 2 Safety Precautions... 2 Installation... 3 Horizontal Installation... 3 Vertical Installation with rackets... 4 Vertical Installation - Keyhole Mounts (0U models only)... 5 ord Retention Tray installation... 5 Meter onfiguration... 5 lectrical Installation... 6 Troubleshooting... 6 Product eatures Technical Specification... 7 asic Series (1U 20)... 7 asic Series (1U 30)... 8 asic Series (0U 10)... 9 asic Series (0U 20) asic Series (0U 30) Metered Series (0U 20) Metered Series (0U 30) & Service...14

3 Model List: Package ontents asic Series: PU20HVT8R PU20HVT10R PU20HVT12R PU20HVI8R PU20HVI10R PU20HVI12R PU20HVI12Ra PU30T88R PU30T1010R PU30HVT8R PU30HVT10R PU30HVT12R asic Series (0U): PU (1) ord Retention Tray (1/2/3/4 pcs - varies by model) Mounting rackets PU10VHVI16 PU10VHVI20 PU20VHVT16 PU20VHVT20 PU20VHVT24 PU20VHVT32 PU20VHVT38 PU20VHVI16 PU20VHVI20 PU20VHVI24 PU20VHVI32 PU20VHVI38 PU30VT14 PU30VT16 PU30VT20 PU30VT28 PU30VT32 PU30VHVT16 PU30VHVT20 PU30VHVT32 PU30VHVT38 Horizontal Installation Used (1 set) Vertical Installation Vertical Mounting rackets (1 set) Used (1 set) (for 0U models only) ord Retention Tray Mounting Screws M3 X 6 (4/8/12/16 pcs - varies by model) racket Mounting Screws M4 X 8 (4pcs) Metered Series (0U): PU20MVHVT20 PU20MVHVT30 PU20MVHVT38 PU20MVHVI24 PU20MVHVI30 PU20MVHVI38 PU30MVT24 PU30MVT32 PU30MVHVT20 PU30MVHVT30 PU30MVHVT38 Keyhole Mounting Pegs (2pcs) with Screws M4 X 8 (2pcs) (for 0U models only) ord Retainer lips (8/10/12/14/16/ 20/24/30/32/38 pcs - varies by model) for ord Retention Tray round Screw M5 X 6 (1 pcs) PU Naming onvention: ocumentation: PU XX M V HV T R NT Use r Man ual ist Power ribu tion Unit 8 User Manual mperage 15, 20, 30 : =asic M: =Metered SW: = Switched NULL: =Horizontal V:= Vertical 3. Rack Space: NULL: =120V HV:= High 200V to 230V 4. : NULL: =NM 5-15P / 5-20P 5. Plug Type: T: = Twist (NM L5-L6 Plug) I:= (I 14/20) Number of Outlets followed by xample 8 6. Outlet Number ront Number of Outlets followed by R xample 8R 7. Outlet Number Rear 8. Network Management NT 1. mperage: 2. Series: heck Product Registration ard Product Registration ard efore using, please check to ensure the package contains all the items shown above. If there are missing parts please contact yberpower technical support at or call Safety Precautions Read the following before installing or operating the Power istribution Unit (PU): 1. Use only the supplied hardware to attach the mounting brackets. 2. The PU must only be plugged into a three-wire, grounded outlet on a circuit protected by a fuse or circuit breaker. onnection to any other type of power outlet may result in a shock hazard. 3. o not use extension cords or adapters with this PU. 4. Never install a PU, or associated wiring or equipment, during a lightning storm. 5. heck that the power cord, plug, and socket are in good condition. 6. The socket-outlet shall be installed near the equipment and shall be easily accessible. 7. UTION! To prevent the risk of fire or electric shock, this PU should be installed in a temperature and humidity controlled indoor area free of conductive contaminants. o not install this PU where excessive moisture or heat is present.. 1 or information on yberpower products, visit or information on yberpower products, visit 2

4 Installation Horizontal Installation (1U models only) Step 1 Mounting bracket installation Vertical Installation with rackets Step 1 Mounting bracket installation Install the screws (M4 X 8) in holes diagonal from each other. Install the screws (M4 X 8) in holes diagonal from each other. Step 2 PU Mounting Step 2 PU Mounting Install the PU using fasteners compatible with the rack. Vertical Installation with rackets (0U models only) Step 1 Mounting bracket installation Install the PU using fasteners compatible with the rack. ttach the Vertical Mounting rackets to the PU with the 4 supplied racket Mounting Screws (M4 X 8). Step 2 PU Mounting Install the PU using fasteners compatible with the rack. 3 or information on yberpower products, visit or information on yberpower products, visit 4

5 Vertical Installation with Keyhole Mounts (0U Models) Step 1 Keyhole Mount installation lectrical Installation Step 1 Receptacle evaluation nsure that the plug type of your PU unit (e.g. NM 5-15P, NM 5-20P, NM L5-30P) matches the wall receptacle type that you are using. UTION!! PU must be plugged into a three-wire, grounded wall receptacle only. The wall receptacle must also be connected to an appropriate branch circuit/main with fuse or circuit breaker protection. onnection to any other type of wall receptacle may result in a shock hazard. Step 2 Plug the PU into the wall receptacle ttach the Keyhole Mounting Pegs to the PU with the 2 supplied racket Mounting Screws (M4 X 8). Step 2 PU Mounting Step 3 ttach equipment efore attaching equipment, it is important to calculate the total load that you will be placing on the PU. It is extremely important not to exceed the PU's maximum current load (as outlined in the Specifications section). In order to determine your total load, simply add up the amperage of your devices and ensure that it does not exceed the unit s capacity. lign the the Keyhole Mounts to the Keyhole Slots on the rack. Insert and slide down to lock firmly into place. ord Retention Tray installation (Optional for both horizontal and vertical installations) ttach the ord Retention Tray to the PU with the 4 supplied ord Retention Tray Mounting Screws (M3 X 6). Troubleshooting Problem Possible ause Solution PU Outlets do not provide power to connected equipment mperage displayed on mperage Meter exceeds the unit s capability (Metered type only) ircuit breaker has tripped 1. Open breaker 2. Loose power cord 1. Overload 2. mperage meter is damaged 1. Sustained overload 2. xcessive ambient or internal temperatures. 3. aulty breaker Reset reaker check if plug is completely connected. If the problem remains contact tech support. The meter will flash when overloaded. Reduce the load on the PU until the overload is gone. If the problem remains contact tech support. Reset reaker. If the problem remains contact tech support. ttach the ord Retainer lips to the ord Retention Tray. Meter onfiguration! Note epending on installation method (vertical or horizontal), the L Meter may need to be rotated, before installation, for proper orientation. Use a screwdriver to gently remove the L Meter. Rotate the L Meter 90 degrees, and insert back into the PU. 5 or information on yberpower products, visit or information on yberpower products, visit 6

6 R R R asic Series ( 1U 20 ) asic Series ( 1U 30 ) Product eatures ront View Product eatures ront View Normal Type NK1 NK2 NK1 ack View. Mounting racket. Mounting racket. L. ront ank 1 Outlets High Type Twist Type NK1 NK2 I Type. Mounting racket. Rear Outlets (I ). Rear Outlets (I ). ircuit reaker. xternal Site round. Power ord. ord Retention Tray. Mounting racket. L ack View Normal Type NK2.Mounting racket.ircuit reaker (ank 1).Rear ank 2 Outlets.xternal Site round.ircuit reaker (ank 2). Power ord.ord Retention Tray High Type NK2 NK1. Mounting racket. Rear Outlets (I ). ircuit reaker. xternal Site round. Inlet (I ). ord Retention Tray H.Mounting racket.ank 2 Outlets.ank 1 Outlets.ircuit reaker (ank 2).ircuit reaker (ank 1).xternal Site round. Power ord H.ord Retention Tray H PU20HVT8R PU20HVT10R PU20HVT12R PU20HVI8R PU20HVI10R PU20HVI12R PU20HVI12Ra Max urrent Regulatory erated urrent ircuit reaker Plug Type NM L6-20P I Power ord Length Max urrent L I (2)/13(6) I (2)/13(8) I (12) PU30T88R PU30T1010R 20 Max urrent 30 I (8) I (10) NM 5-20R(16) I (12) NM 5-20R(20) I (2)/13(10) N/ L ank1(rn) N/ N/ PU30HVT8R PU30HVT10R PU30HVT12R 100 ~ 125 V Max urrent Regulatory erated urrent ircuit reaker 20 x 2 16 x 2 Plug Type NM L5-30P NM L6-30P Power ord Length 12 ft 100~125 V I (2)/13(6) I (2)/13(8) I (12) ank2(rn) imension (WxxH) 17.5" x 1.5" x 1.75" / 44.5 x 3.81 x 4.45 cm imension (WxxH) 17.5"x2.25"x1.75" / 44.5x5.72x4.45 cm 17.5"x1.5"x1.75" / 44.5x3.81x4.45 cm nvironmental ltitude Safety pprovals ertifications Operating 32 to 95 Non-Operating 5 to 113 TL (test followed UL ) nvironmental ltitude Safety pprovals ertifications Operating 32 to 95 Non-Operating 5 to 113 TL (test followed UL ) 7 or information on yberpower products, visit or information on yberpower products, visit 8

7 asic Series ( 0U 10 ) asic Series ( 0U 20 ) Product eatures ront View ack View Product eatures ront View ack View. Inlet (I ). ircuit reaker. xternal Site round. ront Outlets. ord Retention Tray. racket Screw Hole. Keyhole Mount Peg Twist Type:. Power ord. ircuit reaker. xternal Site round. ront Outlets. ront Outlets. ord Retention Tray. racket Screw Hole. Keyhole Mount Peg Max urrent urrent ircuit reaker Plug Type Power ord Length Max urrent L imension (WxxH) nvironmental ltitude Safety pprovals ertifications PU10VHVI16 PU10VHVI I I (16) I (4)/13(16) N/ N/ 1.75"x1.5"x24" / 4.45x3.81x60.96 cm 1.75"x1.5"x36" / 4.45x3.81x91.44 cm Operating 32 to 95 Non-Operating 5 to 113 TL (test followed UL ) High Type:. Inlet (I ). ircuit reaker. xternal Site round. ront Outlets. ront Outlets. ord Retention Tray Max urrent Regulatory erated urrent ircuit reaker PU20VHVT16 PU20VHVT20 PU20VHVT24 PU20VHVT32 PU20VHVT38 PU20VHVI16 PU20VHVI20 PU20VHVI24 PU20VHVI32 PU20VHVI38 Plug Type NM L6-20P I Power ord Length Max urrent L imension (WxxH) nvironmental ltitude Safety pprovals ertifications I (16) I (4)/13(16) I (4)/13(20) I (8)/13(24) I (8)/13(30) N/ N/ 1.75" x 1.5" x 24" / 4.45 x 3.81 x cm 1.75" x 1.5" x 36" / 4.45 x 3.81 x cm 1.75" x 1.5" x 48" / 4.45 x 3.81 x cm 1.75" x 1.5" x 60" / 4.45 x 3.81 x cm 1.75" x 1.5" x 70" / 4.45 x 3.81 x cm Operating 32 to 95 Non-Operating 5 to 113 TL (test followed UL ) 9 or information on yberpower products, visit or information on yberpower products, visit 10

8 asic Series ( 0U 30 ) Meter Series ( 0U 20 ) Product eatures ront View ack View Product eatures ront View ack View Normal Type:. Power ord. xternal Site round. ircuit reaker (ank 1). ircuit reaker (ank 2). ord Retention Tray. ront Outlets(ank1). ront Outlets(ank2) Normal Type:. Power ord. racket Screw Hole. Keyhole Mount Peg Twist Type:. Power ord. ircuit reaker. xternal Site round. ront Outlets.. ront Outlets. ord Retention Tray. racket Screw Hole. Keyhole Mount Peg High Type:. Power ord. ircuit reaker (ank 1). ircuit reaker (ank 2). xternal Site round. ront Outlets(ank 1). ront Outlets(ank 2). ord Retention Tray High Type:. Power ord. racket Screw Hole. Keyhole Mount Peg High Type:. Inlet (I ). ircuit reaker. xternal Site round. ront Outlets.. ront Outlets. ord Retention Tray PU30VT14 PU30VT16 PU30VT20 PU30VT28 PU30VT32 PU30VHVT16 PU30VHVT20 PU30VHVT32 PU30VHVT ~ 125 V Max urrent Regulatory erated urrent ircuit reaker 20 x 2 16 x 2 Plug Type NM L5-30P NM L6-30P Power ord Length Max urrent L 100 ~ 125 V NM 5-20R(14) NM 5-20R(16) NM 5-20R(20) NM 5-20R(28) NM 5-20R(32) 30 N/ N/ I (16) I (4)/13(16) I (8)/13(24) I (8)/13(30) Max urrent Regulatory erated urrent ircuit reaker PU20MVHVT20 PU20MVHVT30 PU20MVHVT38 PU20MVHVI24 PU20MVHVI30 PU20MVHVI38 Plug Type NM L6-20P I Power ord Length Max urrent L I (4)/13(16) I (6)/13(24) I (8)/13(30) N/ mperage I (4)/13(20) I (6)/13(24) I (8)/13(30) imension (WxxH) 1.75"x2.25"x24" / 4.45x5.72x60.96 cm 1.75"x2.25"x36" / 4.45x5.72x91.44 cm 1.75"x2.25"x48" / 4.45x5.72x121.92cm 1.75"x2.25"x60" / 4.45x5.72x cm 1.75"x2.25"x70" / 4.45x5.72x cm 1.75"x1.5"x24" / 4.45x3.81x60.96 cm 1.75"x1.5"x36" / 4.45x3.81x91.44 cm 1.75"x1.5"x60" / 4.45x3.81x cm 1.75"x1.5"x70" / 4.45x3.81x cm imension (WxxH) 1.75" x 1.5" x 48" / 4.45 x 3.81 x cm 1.75" x 1.5" x 60" / 4.45 x 3.81 x cm 1.75" x 1.5" x 70" / 4.45 x 3.81 x cm nvironmental ltitude Operating 32 to 95 Non-Operating 5 to 113 nvironmental ltitude Operating 32 to 95 Non-Operating 5 to 113 Safety pprovals ertifications TL (test followed UL ) Safety pprovals ertifications TL (test followed UL ) 11 or information on yberpower products, visit or information on yberpower products, visit 12

9 Metered Series (0U 30) Product eatures ront View H I I Normal Type:. Power ord. xternal Site round. ircuit reaker (ank 1). ircuit reaker (ank 2). ord Retention Tray. ront Outlets (ank 1). (ank 1) H. (ank 2) I. ront Outlets (ank 2) High Type:. Power ord. ircuit reaker (ank 1). ircuit reaker (ank 2). xternal Site round. ront Outlets (ank 1). (ank 1). (ank 2) H. ront Outlets (ank 2) I. ord Retention Tray I H PU30MVT24 PU30MVT32 ack View. Power ord. racket Screw Hole. Keyhole Mount Peg PU30MVHVT20 PU30MVHVT30 PU30MVHVT ~ 125 V Max urrent Regulatory erated urrent ircuit reaker 20 x 2 16 x 2 Plug Type NM L5-30P NM L6-30P Power ord Length Max urrent L 100 ~ 125 V NM 5-20R(24) NM 5-20R(32) I I 30 N/ 2 mperage I (4)/13(16) I (6)/13(24) I (8)/13(30) Product Registration Thank you for purchasing a yberpower product. Prompt product registration entitles coverage under the Limited and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements. Registration is quick and easy at Need dditional Help? eel free to contact our Tech Support department with installation, troubleshooting, or general product questions. yberpower Technical Support Phone: mail: tech@cpsww.com Web: Mail: th venue, Suite 400 Shakopee, MN Hours of Operation: Monday riday, 8:00am 5:00pm (ST) Limited Read the following terms and conditions carefully before using the yberpower PU(the Product ). y using the Product you consent to be bound by and become a party to the terms and conditions of this Limited (together referred to as this ). If you do not agree to the terms and conditions of this, you should return the Product for a full refund prior to using it. Who is Providing this? yberpower Systems (US), Inc. ( yberpower ) provides this Limited. What oes This over? This warranty covers defects in materials and workmanship in the Product under normal use and conditions. What is the Period of overage? This is for as long as the original owner owns the Product. Who Is overed? This warranty only covers the original purchaser. overage ends if you sell or otherwise transfer the Product. How o You et Service? 1. all us at (877) or write to us at yber Power Systems (US), Inc., th ve.., ST 400, Shakopee, MN or send us an message at claims@cyberpowersystems.com for instructions. 2. When you contact yberpower, identify the Product, the Purchase ate, and the item(s) of onnected quipment. Have information on all applicable insurance or other resources of recovery/payment that are available to the Initial ustomer and Request a laim Number. 3. You must provide a purchase receipt (or other proof of the original purchase) and provide a description of the defect. 4. Pack and ship the product to yberpower and, if requested, the item(s) of onnected quipment, a repair cost estimate for the damage to the onnected quipment, and all claim forms that yberpower provides to you. Show the laim Number on the shipping label or include it with the product. You must prepay all shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate. imension (WxxH) nvironmental ltitude Safety pprovals ertifications 1.75"x2.25"x60" / 4.45x5.72x cm 1.75"x2.25"x70" / 4.45x5.72x cm 1.75"x1.5"x48" / 4.45x3.81x cm 1.75"x1.5"x60" / 4.45x3.81x cm 1.75"x1.5"x70" / 4.45x3.81x cm Operating 32 to 95 Non-Operating 5 to 113 TL (test followed UL ) What Will We o To orrect Problems? yberpower will inspect and examine the Product. If the Product is defective in material or workmanship, yberpower will repair or replace it at yberpower's expense, or, if yberpower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, yberpower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required). Who Pays or Shipping? We pay when we send items to you; you pay when you send items to us. 13 or information on yberpower products, visit or information on yberpower products, visit 14

10 What re Some Things This oes Not over? 1. This does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software. 2. This does not cover or apply to: misuse, modification, operation or storage outside environmental limits of the Product or the equipment connected to it, nor for damage while in transit or in storage, nor if there has been improper operation or maintenance, or use with items not designed or intended for use with the Product, such as laser printers, appliances, aquariums, medical or life support devices, etc. What are the Limitations? 1. This does not apply unless the Product and the equipment that was connected to it were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors. 2. The Product must have been plugged directly into the power source and the equipment connected to the Product must be directly connected to the Product and not daisy-chained together in serial fashion with any extension cords, another Product or device similar to the Product, surge suppressor, or power tap. ny such installation voids the Limited. 3. The Product and equipment connected to it must have been used properly in a suitable and proper environment and in conformance with any license, instruction manual, or warnings provided with the Product and the equipment connected to it. 4. The Product must have been used at all times within the limitations on the Product's V capacity. 5. The sole and exclusive remedies of the Initial ustomer are those provided by this. ontact Information yberpower Systems, Inc th ve. ast Suite 400 Shakopee, MN Phone: (952) Toll-free: (877) yberpower is the warrantor under this Limited. You may also contact yberpower on the web at PSww.com. 15 or information on yberpower products, visit or information on yberpower products, visit 16