Phosphor bronze/ Brass/nickel base, Brass/nickel base, 0.4- m gold nickel base, 0.4- nickel base, mm gold plating. plating m gold plating
|
|
- Imogene Goodwin
- 6 years ago
- Views:
Transcription
1 Round Water-resistant Connectors (M8/S8) XS CSM_XS_DS_E_7_ Small Round Water-resistive Connectors Water-resistive, compact connector meets IP67 requirements. Conventional M8 screw-mounting models are available along with S8 snap-in models that connect and disconnect with one touch. Ideal for a wide variety of FA and OA applications. Connectors on both cable ends require no harness work. Some new M8 models with or poles. Refer to Safety Precautions on page 9. Ratings and Specifications Item Model XSF/H/W/P/M XSF-M@-@@-A XSM-M-@ XSR Rated current ADC ADC ADC Rated voltage VDC * 0 VDC VDC Contact resistance (connector) Insulation resistance Dielectric strength (connector) Degree of protection IP67 (IEC609) Insertion tolerance 00 times Cable tensile strength * 0 N Ambient operating temperature range to 70 C to 8 C to 70 C *. Models with cable only *. Except poles Materials and Finish 0 m max. (0 mv max., 00 ma max.),000 M min. (at 00 VDC),000 VAC for min (leakage current: 60 VAC for min (leakage current: ma max.) ma max.) 60 m max. (0 mvdc max., 00 ma max.),000 VAC for min (leakage current: ma max.) Connector Type M8 S8 Item Model XSF/H/W/R XSP/M * XSM-M-@ XSF/W (Socket side) XSH/W (Plug side) XSP Contact block PBT resin (U9 V-0) light gray or black Contacts Phosphor bronze/ Phosphor bronze/ Brass/nickel base, Brass/nickel base, 0.- m gold nickel base, 0.- nickel base, mm gold plating plating m gold plating m gold plating Thread bracket Brass/nickel plating or SUS6 Brass/nickel plating Body Brass/nickel plating Nickel-plated zinc alloy Shell TPEE C-Ring Phosphor bronze/tin plating Grounding fixture Phosphor bronze/tin plating Nut Brass/nickel plating Brass/nickel plating Cover Soft PBT resin (U9 V-0) TPEE O-ring Rubber *Except poles Note: The XSM is for both M8 and S8. Cables Item Pins pin pin pin Diameter mm dia..7 mm dia. Standard Cross cable 0. mm section 0. mm (/ 0.6 mm (8 / 0. mm dia.) area dia.) Vibrationproof robot cable Diameter mm dia. Cross 0. mm section (0 / 0.08 mm dia.) area Pin Arrangement (Engaged Side) Item Pins pin pin pin DC Plug Socket
2 XS Wiring System Configuration Using Sensors with Connectors Proximity Sensor (M8 Connector Models) EE Sensor End Connector with Cable Relay Cable XSW (screw-mounting models) Proximity Sensor (Pre-wired Connector Models) XSW (snap-in models) EE Fiber Amplifier (Connector models) EX Multiple XSW (screw-mounting and snap-in models) can be used to extend the cable. Photoelectric Sensor (Connector models) EZ Connector with Cable XSF (screw-mounting models) Making Sensors with Cables (Sensor Manufacturers) Connector with Cable XSH (screw-mounting models) XSF (snap-in models) XSH (snap-in models) Used to enable connectors (direct connection types) to be integrated with the Sensor body. Sensor-embedded Connector XSM (Embedded Model)
3 XS ( indicates mating connectors, and indicates wiring connections.) PCB Type Personal Computer PT (Programmable Terminal) Terminal Box Connector XSP Y-Joint XSR Used to enable using connectors for terminal boxes. Host ink Cable XWZ Used to wire two Sensors to a single cable. Crimp terminal wiring Connector-Terminal Block Conversion Units XWR (PC, General-purpose devices) XWD (slim model) XWC (with power supply common terminal) XWB (general-purpose model) XWF (with screwless clamp terminals) Connecting Cable XWZ Programmable Controller Terminal Block (Commercially Available)
4 XSW M8 Screw-mounting Connectors with Vibration-proof Robot Cable XS Straight/Straight Connectors Straight/Right-angle Connectors M8.0 0 dia. Socket dia. Plug M8.0 0 dia. dia..... Right-angle/Right-angle Connectors Right-angle/Straight Connectors M8.0 0 dia. 0. dia.. 0. dia. M8.0 0 dia.... S8 Snap-in Connectors with Vibration-proof Robot Cable XSW-S@-@@-R Straight/Straight Connectors Straight/Right-angle Connectors 8. dia. Socket dia. Plug dia. 8. dia. 8. dia dia Right-angle/Right-angle Connectors 8. dia. 8. dia. Right-angle/Straight Connectors 8. dia. dia. dia dia
5 Model Number egend XS Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XSW-@@@-@@@-R 6. Fastening Method M: M8 S: S8. Connector Poles : poles : poles. Cable Connection Direction : Straight (socket/xsf)/ Straight (plug/xfh) : Right-angle (socket/xsf)/ Right-angle (plug/xfh) : Straight (socket/xsf)/ Right-angle (plug/xsh) : Right-angle (socket/xsf)/ Straight (plug/xsh). Connections Pin No. ➀ ➂ ➃ : Brown Blue Black Pin No. ➀ ➁ ➂ ➃ : Brown White Blue Black. Cable ength 0: m 0: m 0: m 6. Cable Specifications R: Vibration-proof robot cable Wiring Diagram/Engaged Side Mating Connectors poles Contact No. Socket poles Contact No. Socket Plug Plug Cable lead colors Brown Blue Black Cable lead colors Brown White Blue Black Item Socket side Plug side XSW (M8) XSW (S8) XSM (M8/S8) XSH (M8) XSM (M8/S8) XSH (M8) XSF (M8) XSW (M8) XSP (M8) XSF (S8) XSW (S8) XSP (S8) Note. Cables can be extended with more than one XSW.. M8 screw models and S8 snap-in models cannot be connected to each other. Ordering Information M8 Screw-mounting Connectors No. of cable cores Cable connection direction Cable length (m) Model XSW-M-0-R Straight/Straight XSW-M-0-R XSW-M-0-R XSW-M-0-R Straight/Straight XSW-M-0-R XSW-M-0-R XSW-M-0-R Right-angle/Right-angle XSW-M-0-R XSW-M-0-R Straight/Right-angle XSW-M-0-R XSW-M-0-R Right-angle/Straight XSW-M-0-R S8 Snap-in Connectors No. of cable cores Cable connection direction Cable length (m) Model XSW-S-0-R Straight/Straight XSW-S-0-R XSW-S-0-R XSW-S-0-R Right-angle/Right-angle XSW-S-0-R XSW-S-0-R Straight/Right-angle XSW-S-0-R XSW-S-0-R Right-angle/Straight XSW-S-0-R
6 XS XSF Sockets on One Cable End M8 pin Screw-on Cables with Vibration-proof Robot Cable/Standard Cable Straight Connectors M8.0 dia Right-angle Connectors. 0 dia Wiring Diagram M8.0.7 Contact No. Cable lead colors Brown Blue Black M8 pin Screw-on Cables with Vibration-proof Robot Cable/Standard Cable XSF-@@-@@-@ Straight Connectors. M8.0.9 dia Right-angle Connectors dia.. M Contact No. Wiring Diagram Cable lead colors Brown White Blue Black 6
7 XS M8 pin Screw-on Cables with Standard Cable Straight Connectors..9 M8.0.7 dia dia. Right-angle Connectors M Contact No. Wiring Diagram Cable lead colors Brown White Blue Black Gray S8 Snap-in Connectors with Vibration-proof Robot Cable XSF-S@-@@-R Straight Connectors. 8. dia..9 dia Right-angle Connectors dia.. 8. dia Contact No. Wiring Diagram Cable lead colors Brown White Blue Black 7
8 XS Model Number egend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XSF-@@@-@@@-@ 6. Fastening Method M: M8 S: S8 E: M8 SUS6 ock. Connector Poles : poles : poles : poles. Cable Connection Direction : Straight : Right-angle. Cable ength 0: m 0: m 0: m. Connections 0: 0 m Pin No. ➀ ➂ ➃ 6. Cable Specifications : Brown Blue Black Pin No. ➀ ➁ ➂ ➃ : Brown White Blue Black Pin No. ➀ ➁ ➂ ➃ ➄ : Brown White Blue Black Gray A: Standard cable R: Vibration-proof robot cable Mating Connectors Item XSF(M8) XSF(S8) Model XSM (M8/S8), XSH (M8), XSW (M8) XSM (M8/S8), XSH (M8), XSW (M8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. 8
9 XS Ordering Information M8 Screw-on Cables No. of cable cores Item Cable connection direction Cable length (m) Model XSF-M-0-A Straight XSF-M-0-A Standard cable XSF-M-0-A Right-angle XSF-M-0-A XSF-M-0-R Straight XSF-M-0-R Vibration-proof robot cable XSF-M-0-R Right-angle XSF-M-0-R XSF-M-0-A Straight XSF-M-0-A Standard cable XSF-M-0-A Right-angle XSF-M-0-A XSF-M-0-R Straight XSF-M-0-R XSF-M-0-R Vibration-proof robot cable XSF-M-0-R Right-angle XSF-M-0-R XSF-M-0-R XSF-E-0-A Straight XSF-E-0-A Standard SUS6 cable lock XSF-E-0-A Right-angle XSF-E-0-A XSF-M-0-A Straight XSF-M-0-A 0 XSF-M-0-A Standard cable XSF-M-0-A Right-angle XSF-M-0-A 0 XSF-M-0-A S8 Snap-in Connectors No. of cable cores Item Cable connection direction Cable length (m) Model XSF-S-0-R Straight XSF-S-0-R XSF-S-0-R Vibration-proof robot cable XSF-S-0-R Right-angle XSF-S-0-R XSF-S-0-R 9
10 XS XSH Plugs on One Cable End M8 pin Screw-on Connectors with Vibration-proof Robot Cable Straight Connectors M8.0 dia dia Wiring Diagram Contact No. Cable lead colors Brown Blue Black M8 pin Screw-on Connectors with Vibration-proof Robot Cable XSH-M@-@@-R Straight Connectors Four, dia.. M8.0.9 dia. 0 dia Right-angle Connectors dia. M8.0 Four, dia. 0 dia.. Contact No. Wiring Diagram Cable lead colors Brown White Blue Black 0
11 XS S8 pin Snap-in Connectors with Vibration-proof Robot Cable Straight Connectors Four, dia...9 dia. 8. dia Right-angle Connectors dia. Four, dia. 8. dia
12 XS Model Number egend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XSH-@@@-@@@-R 6. Fastening Method M: M8 S: S8. Connector Poles : poles : poles. Cable Connection Direction : Straight : Right-angle. Connections Pin No. ➀ ➂ ➃ : Brown Blue Black Pin No. ➀ ➁ ➂ ➃ : Brown White Blue Black. Cable ength C: 0. m 0: m 6. Cable Specifications R: Vibration-proof robot cable Mating Connectors Item XSH(M8) XSH(S8) Model XSF (M8), XSW (M8), XSP (M8) XSF (S8), XSW (S8), XSP (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. Ordering Information M8 Screw-on Connectors No. of cable cores Cable connection direction Cable length (m) Model 0. XSH-M-C-R Straight XSH-M-0-R 0. XSH-M-C-R Straight XSH-M-0-R 0. XSH-M-C-R Right-angle XSH-M-0-R S8 Snap-in Connectors No. of cable cores Cable connection direction Cable length (m) Model 0. XSH-S-C-R Straight XSH-S-0-R 0. XSH-S-C-R Right-angle XSH-S-0-R
13 XS XSP Panel-mounting Sockets for Terminal Boxes M8 Screw-mounting Sockets with DIP Pins M8 Screw-mounting Sockets with Solder Cup Pins M8 Screw-mounting Sockets with Solder Cup Pins XSP-M- XSP-M- XSP-M- XSP-M- (DIP Pins) Front lock or rear lock XSP-M- (Solder Cup Pins) Front lock or rear lock.8.9 Four, dia dia dia.. 9. M.0 M.0.. M.0 nut Rubber bushing. 9.7 M8.0 8 dia.. 9. Solder cup hole 0.8 dia.. M.0. M.0 nut M.0. Rubber bushing. 9.7 M8.0 XSP-M- (Solder Cup Pins), Rear ock Slim Models 0 7. (0.) dia. M8 0. M8 0. nut Rubber bushing. 0 M8.0 S8 Snap-in Sockets with DIP Pins S8 Snap-in Sockets with Solder Cup Pins XSP-S- XSP-S- XSP-S- (DIP Pins) Front lock or rear lock XSP-S- (Solder Cup Pins) Front lock or rear lock.8.9 Four, dia dia dia.. 9. M.0 M.0.. M.0 nut Rubber bushing dia.. 9. Solder cap hole 0.8 dia.. M.0. M.0 nut M.0. Rubber bushing. 9.
14 XS Mounting for XSP Screw-on Models and Snap-in Models Panel Cutouts PCB-mounting Panel-mounting XSP-M- Front ock and min.. Rear ock Panel Panel dia. min. Note: The panel thickness is to mm Four,. dia Note: The panel thickness is. mm maximum. Nut Rubber bushing Rubber bushing Nut Mating Connectors Item XSP(M8) XSP(S8) Model XSH (M8), XSW (M8) XSH (S8), XSW (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. Ordering Information Connection method Panel mounting Pin shape Model Minimum order DIP pins XSP-M- Front lock or rear lock M8 screw-mounting Solder cup pins XSP-M- Rear lock Solder cup pins XSP-M- 0 DIP pins XSP-S- S8 snap-in Front lock or rear lock Solder cup pins XSP-S- Note: Orders are accepted in multiples of the minimum order. Safety Precautions In addition to the following information, also refer to Safety Precautions on page 9 Precautions for Correct Use Panel Mounting When mounting XSP Panel-mounting Connectors to panels, refer to Panel-mounting and provide rubber bushings and nuts for the Connectors. Apply a tightening torque of between 0. and 0.6 N m to mount the Connectors.
15 XS XSM Sensor Embedded Plugs Embedded Plugs with Screw Threads and DIP Pins Embedded Plugs with Screw Threads and Solder Cup Pins XSM-K- XSM-K- XSM-K- Embedded Model with DIP Pins Mounting Four, dia. M8.0 dia. 0.. Four, dia. 6. dia..8±0. dia..8 dia. 6. dia dia..6 dia. XSM-K- Embedded Model with Solder Cup Pins Four, dia..6 dia M Four, dia. Resin filled 7. (min) Mounting 6. dia..8±0. dia..8 dia. 6. dia dia..6 dia. Solder cup hole 0.7 dia Resin filled. (min) Mating Connectors Item Model XSM XSF (M8/S8), XSW (M8/S8) Note: The plug can be connected to both M8 screw and S8 snap-in models. Ordering Information Connection method Pin shape Model Minimum order DIP pins XSM-K- Embedded model 00 Solder cup pins XSM-K- Note: Orders are accepted in multiples of the minimum order.
16 XS XSM Panel-mounting Plugs Front lock DIP pins ( pins) XSM-M-@@ XSM-M-0 Front ock with DIP Pins. mm (for Either Round Holes or Solder Cups), Without Shield Terminal Panel Cutout PCB-mounting 8. mm dia Five,.7 dia. lands Five,. dia. O-ring on panel side* Note: The panel thickness is 0.8 to mm Note: The panel thickness is. mm maximum. Terminal Numbers..9 M8.0 O-ring on panel side* dia SW7 SW0 6 min. XSM-M- Front ock with DIP Pins. mm (for Either Round Holes or Solder Cups), With Shield Terminal (.) Panel location (example for t =.0) *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. SW Panel Cutout PCB-mounting mm dia Five,.7 dia. lands Five,. dia Two,. lands R0.6 -R0. Two,.8 lands..9 O-ring on panel side* Note: The panel thickness is 0.8 to mm. O-ring on panel side* M Two,. -0. lands Note: The panel thickness is. mm maximum Terminal Numbers. - dia SW7 -. SW 6 min. 7.0 SW0 (.) Panel location (example for t =.0) *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. Mating Connectors Ordering Information Item XSM-M-@ Model XSF-M@-@@-A ock method Pin shape Shield terminal Model DIP pins. mm No XSM-M-0 Front lock (for either round holes or solder cups) Yes XSM-M- Note: Orders are accepted in multiples of the minimum order. 6
17 XS Safety Precautions In addition to the following information, also refer to Safety Precautions on page 9 XSM-M-@@ Mating Precautions for Correct Use To mate the Connectors, align the mating marks on the Plug and Socket (see following figure), insert the Connectors completely, and tighten the lock nut, being careful not to damage the threads. Plug Mating marks Socket XSM-M-@@ Panel Mounting After you mount the Connector to the panel, attach the nut and tighten it to a suitable torque (0. N m). XS M8/S8 Connector Cover Dust Cover XSZ- XSZ- M8 Plug XSZ- XSZ- M8 Socket S8 Socket S8 Plug The Dust Cover is for dust prevention and does not ensure IP67. When mounting the Dust Cover to a Connector, be sure to press the Dust Cover onto the Connector until the Connector is fully inserted into the Dust Cover. Model Material Suitable connector Model Mounting portion XSH/XSW/XSR M8 plug XSZ- XSF/XSW S8 socket PVC resin/red XSH/XSW S8 plug XSM M8/S8 plug XSZ- XSF/XSW/XSR M8 socket 7
18 XSR Y-Joint Plug/Socket Connectors XS Screw-on Models (M8) With Standard Cable: Without Cable: Connectors on Both Cable Ends (Y-Joint Plug/Socket) XSR M8.0. Socket CN CN Connector on Both Ends (Y-Joint Plug/Socket) without Cable 0. M8.0. M8.0 Socket CN CN Socket CN dia.. dia. 6.. dia dia..6 dia. Plug. 0 dia. CN0 CN dia. dia. 0 0 M8.0 Plug 0 dia. CN0 M8.0 Wiring Diagram XSR-M6-@@-A XSR-M6-@@0-A XSR-M6- XSR-M6- CN CN CN0 CN CN ead color Black Blue White Brown CN CN CN CN0 CN CN0 Mating Connectors Ordering Information Item XSR(M8) Model XSF(M8) XSH(M8) XSW(M8) XSP(M8) For M8 Connectors Cable With cable Without cable Connector Connectors on both cable ends Connector on one cable end Connectors on both cable ends Cable length Model (m) 0. XSR-M6-C-A XSR-M6-0-A XSR-M6-0-A XSR-M6-0-A XSR-M6-00-A XSR-M6-00-A XSR-M XSR-M6- Minimum order 0 8
19 Safety Precautions XS Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Connections The XS and XS Sensor I/O Connectors cannot be connected to each other. You cannot mate Connectors that have a different number of poles. When using Sensors with Connectors or imit Switches, use the Sensor I/O Connectors specified in the catalog. Do not connect M8 screw models and S8 snap-in models together, otherwise the proper degree of protection of the Connectors will not be maintained. Connector Connection and Disconnection Before connecting or disconnecting Connectors, make sure that no power is being supplied to the Connectors. When connecting or disconnecting Connectors, be sure to hold the Connectors by hand. Do not disconnect the Connectors by pulling the cable. Do not touch the engagement side of any Connector with wet hands. If there is any water on the Connector or near the Connector, be sure to wipe off the water before connecting or disconnecting the Connector, otherwise the Connector may short-circuit internally or not ensure good insulation. Make sure that engagement side of any Connector is free of metal dust or power. Do not use pliers to tighten mounting the thread bracket, otherwise the thread bracket may be damaged. Be sure to tighten each thread bracket by hand within a torque of 0. N m. If the thread bracket is not tightened securely, the Connector may not maintain its proper degree of protection or the thread bracket may fall off due to vibration. When you tighten or loosen a lock nut, hold onto only the lock nut. If you hold onto the cover or cable, excessive rotational force will be applied to the Connector and may damage it. Fully insert S8 snap-in models until the Connectors are hidden by the metal casing of the opposite parts, otherwise the Connectors will not maintain their proper degree of protection or the thread brackets may become loose due to vibration. Degree of Protection Do not impose external force continuously on the joints of pin blocks and covers, otherwise the Connectors may not keep its proper degree of protection (i.e., IP67). Connectors are not fully watertight. Do not use them underwater. The Connectors are not oil-resistant. Do not use them where they would be subject to oil. If Connectors are used in places with vibration or shock, secure the engaged side of each Connector, otherwise the Connectors may be disconnected or fail to maintain their proper degree of protection. Connectors are of resin mold construction. Do not impose excessive force on them. Storage Do not store Connectors for long periods of time in the following locations ocations subject to dust or high humidity ocations subject to ammonia gas or sulfide gas Installation Do not make any cable bends near the base of the Unit. Any bends made must have a minimum radius of 6 mm. 9
20 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) imitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPIED, ABOUT NON-INFRINGEMENT, MERCHANTABIITY OR FITNESS FOR A PARTICUAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWEDGES THAT IT AONE HAS DETERMINED THAT THE PRODUCTS WI SUITABY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. imitation on iability; Etc. OMRON COMPANIES SHA NOT BE IABE FOR SPECIA, INDIRECT, INCIDENTA, OR CONSEQUENTIA DAMAGES, OSS OF PROFITS OR PRODUCTION OR COMMERCIA OSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CAIM IS BASED IN CONTRACT, WARRANTY, NEGIGENCE OR STRICT IABIITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPICATION INVOVING SERIOUS RISK TO IFE OR PROPERTY OR IN ARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERY RATED AND INSTAED FOR THE INTENDED USE WITHIN THE OVERA EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and imitations of iability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation 0 All Right Reserved.
650 VAC for 1 min (leakage current: 1 ma max.) Phosphor bronze/ Brass/nickel base, Brass/nickel base, 0.4-μm gold nickel base, 0.
Round Water-resistant Connectors (M8/S8) XS CSM_XS_DS_E_7_ Small Round Water-resistive Connectors Water-resistive, compact connector meets IP67 requirements. Conventional M8 screw-on models are available
More information1 XS3W-M R Robot cable
Round Water-resistant Connectors (M8/S8) XS Small Round Water-resistive Connectors Water-resistive, compact connector meets IP67 requirements. Conventional M8 screw-on models are available along with S8
More informationXS3. Small Round Water-resistive Connectors. Round Water-resistant Connectors (M8/S8) Pin Arrangement (Engaged Side)
Round Water-resistant Connectors (M8/S8) XS CSM_XS_DS_E Small Round Water-resistive Connectors Water-resistive, compact connector meets IP67 requirements. Conventional M8 screw-mounting models are available
More informationRound Water-resistant Connectors (M8) XS3
Round Water-resistant Connectors () XS Compact, Watertight, Round Connectors Water-resistive, compact connector meets IP67 requirements. Ideal for a wide variety of FA and OA applications. Using connectors
More informationPeripheral Devices for Environment-resistive Slaves
Peripheral Devices for Environment-resistive Slaves Peripheral Devices for DeviceNet Communications Ordering Information Environment-resistive Connection Products (for Thin Cable, M Micro Connectors) Product
More informationE2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
More informationE2KQ-X. Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster. Chemical-resistant Proximity Sensor. Ordering Information
Chemical-resistant Proximity Sensor E2KQ-X CSM_E2KQ-X_DS_E_4_3 Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster Excellent resistance against chemicals and oil with fluororesincoated case.
More informationE3Z-G. Photoelectric Sensor with Grooved Design and Easy Settings. Grooved-type Photoelectric Sensor with Built-in Amplifier. Ordering Information
Grooved-type with Built-in Amplifier EZ-G CSM_EZ-G_DS_E_9_ with Grooved Design and Easy Settings Groove-type with groove width of 5 mm. Models are available with one or two light axes. Models are available
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationModel A7BS
Thumbwheel Switch ABS/ABL CSM_ABS/ABL_DS_E Wide Range of Locking-type s Available Character height of.8 or. mm makes for easy-toview display. Installation is easy with snap-in mounting. The series includes
More informationE2EC. Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E_9_ Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded in metal. Robotics cables provided
More informationType Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4. 40 XW2B-40G5 Flat Cable Connectors
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
More informationSensing method Appearance Connection method Sensing distance Model. Pre-wired (2 m) Power supply Application Appearance Function Model
Small Spot/Mark (Separate Amplifier) EC-VS/VM CSM_EC-VS/VM_DS_E_6_ Extremely thin beam ideal for detection of minute objects and marks Ideal for detection of small objects and slight color differences
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E_6_ Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s
More informationAluminum Excellent Performance, with Aluminum Chip Immunity! The indicator is visible from any direction.
All Metals and Long- Types CSM DS_E and Both Detectable from Long Distances times the aluminum detection of previous models Twice the max. Equipped with a function to prevent the detection of aluminum
More informationM22. Round Indicator Series with 22 dia. and 25 dia. (when using a ring) Indicator (Cylindrical 22/25-dia.) List of Models. Model Number Structure
Indicator (Cylindrical 22/25-dia.) CSM DS_E_3_4 Round Indicator Series with 22 dia. and 25 dia. (when using a ring) Same type as the A22-series Pushbutton Switches. Use 25-dia. ring to install in 25-dia.
More informationG3NE. Model Number Structure. Solid State Relays. Model Number Legend. Compact, Low-cost, SSR Switching 5 to 20 A
Solid State Relays CSM DS_E_4_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationCSM_PYF S/P2RF- -S_DS_E_2_5
Screwless Clamp Terminal Sockets PYF@@S/P2RF-@@-S CSM_PYF S/P2RF- -S_DS_E_2_5 New Screwless Terminal Sockets Added for MY and G2R Relays. Simplified wiring without tightening screws. Two wires can be independently
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
More informationProbe Pin XP3A. Electroplated Probe Pin for High Reliability. Feature. List. New Product News
New Product News Probe Pin Electroplated Probe Pin for High Reliability The Probe Pin that is made of only one part. The flat structure helps you reduce the pin pitch in comparison with standard probe
More informationRound Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
More informationG3FM. Model Number Structure. Ordering Information. Solid State Relays. Model Number Legend. List of Models
Solid State Relays CSM DS_E_5_3 100-μA-max. Leakage Current, No Bleeder Resistor Required Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket (according to actual OMRON measurements).
More informationG3B/G3BD. Model Number Structure. Ordering Information. Solid State Relays Model Number Legend. List of Models
Solid State Relays G3@-VD CSM_G3B_G3BD_DS_E_5_1 International Standards for G3B Series, Same Profile as MK Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (models numbers
More informationS82S (3/7.5-W Models)
Switch Mode Power Supply (3/7.5-W Models) CSM DS_E_4_3 Miniature DIN Rail Mounting DC-DC Power Supplies 65 mm depth enables mounting onto control panels with 100 mm depth. Inputs: 10.2 to 27.6 VDC (DC
More informationSolid State Relays with Failure Detection Function
Solid State Relays with Failure Detection Function CSM DS_E_2_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously outputs
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX/6 CSM_EE-SX/6_DS_E_1_ Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes that enable switching
More informationCQM1 I/O Terminal Block Conversion Adapter. Easy and secure replacement by reusing the I/O terminal block wiring.
CQM1 I/O CSM_CJ1W-AT4 DS_E_1_1 Easy and secure replacement by reusing the I/O terminal block wiring You can replace CQM1(H) Series with CJ Series, efficiently using your assets. Time for wiring works and
More informationName No. of I/O points Model Safety inputs: 12, test outputs: 4
Safety I/O s DST1 Series CSM_DST1 Series_DS_E_7_3 Distributed Safety s That Reduce Wiring. Lineup includes four models to accommodate various I/O types and number of I/O points. Monitor the safety system
More informationClassification Applicable models Specification Type Model
Connect Terminal Box (Muting Terminals) F39-TC5 CSM_F39-TC5_DS_E_4_1 Significantly reduces amount of wiring between Safety Light Curtains and Muting Senss. As of August 2008 Provides IP67 protection against
More informationModel Number Structure
Digital Panel Meter CSM DS_E_3_1 Easy-to-use, w-cost Digital Panel Meter that Accepts DC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. Highly visible display
More informationCK3W-PD048 CSM_CK3W-PD048_DS_E_DITA_1_2
CK3W Power Supply Unit CK3W-PD048 CSM_CK3W-PD048_DS_E_DITA_1_2 Supplies power to the CK3M Controller CK3W-PD048 Features 24 VDC input The power supply status indicator shows operating status 1 Ordering
More informationM8 & M12 Connector Cables
Page Number egend M8 & M Connector Cables Cordset Initiative Data Sheet XSF-M8 / XSW-M8 / XSF-M / XSW-M XSF M8 Single-Ended XSW M8 Double-Ended 7 XSF M Single Ended 9 XSW M Double-Ended Cordset Number
More informationElectroformed Probe Pins XP3A
New Product Electroformed Probe Pins Electroplated Probe Pins for High Reliability The Probe Pin that is made of only one part. The flat structure helps you reduce the pin pitch in comparison with standard
More informationE4C-UDA CSM_E4C-UDA_DS_E_12_2
Digital Amplifier Ultrasonic Sensor E4C-UDA CSM_E4C-UDA_DS_E_12_2 Compact, Cylindrical Reflective Ultrasonic Sensor with Easy Setting Stable operation for a variety of objects regardless of color, transparency,
More informationThe Next-generation Sensor Networking Units That Revolutionize the Workplace from Introduction and Startup though Operation. Fiber Units.
Sensor Communications Unit CSM DS_E_1_1 The Next-generation Sensor Networking Units That Revolutionize the Workplace from Introduction and Startup though Operation Low initial cost achieved by distributed
More informationConnecting Sockets, Mounting Brackets, DIN Rails
Connecting Sockets, Mounting Brackets, DIN Rails CSM_ConnectionSocket_DS_E_3_1 Durable, Easy-to-handle Connecting Sockets and Mounting Brackets Highly reliable Track-mounted and Back-connecting Sockets
More informationDimension A. Dimension B
Slim Connector-Terminal lock Conversion Units CSM DS_E_2_3 New Slim Connector-Terminal lock Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing
More informationconfiguration Dark-ON/Light-ON (selectable) *3 Dark-ON/Light-ON (selectable) *3 Dark-ON/Light-ON (selectable) *3 Dark-ON/Light-ON (selectable) *3
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Photomicrosensor with 0- to 100-mA direct switching capacity for built-in application. Series includes models that enable switching
More informationD5B. Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics. Mechanical Touch Switch. Model Number Structure
Mechanical Touch Switch D5B CSM_D5B_DS_E_3_2 Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics Slow-action switching mechanism used. Gold-plated contact with coil spring
More informationM7E. Model Configuration. Digital Display (25 mm) Unit Configuration. Zero Suppression Incorporated
Digital Display (25 mm) CSM 25mm_DS_E_4_3 Zero Suppression Incorporated Single-color (red or green) and two-color (red or green selectable) displays with a character height of 25 mm are available for a
More informationNumber of input channels
Safety Relay Unit (Sensor Connector Type) CSM DS_E_3_1 Less Wiring Required with Safety Light Curtain Sensor connector allows direct connection to OMRON 3SJ Safety Light Curtains with PNP outputs. Reduces
More informationName Specifications Model Standards RS-422A Converter. Converts RS-233C to RS-422A/RS-485. CJ1W-CIF11 UC1, N, L, CE
SYSMAC Option CSM DS_E_2_1 The RS-232C port of the SYSMAC series can be changed into RS-422A/485 port. The connects directly to a CS/CJ-series RS-232C port and converts RS-232C to RS-422A/485. Features
More informationG3H/G3HD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G@-VD CSM_GH_GHD_DS_E_6_ New Models with International Standards Added to GH Series (-VD in model number). Same Profile as LY and LY Bi-power Relays Certified by UL, CSA, and VDE (models
More informationM16-J M16-A M16-T
Indicator (Cylindrical 16-dia.) CSM DS_E_7_2 Cylindrical 16-dia. Indicator Same basic design as the A16 Pushbutton Switch. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety
More informationXS2. Water- and Environmentresistive. Wiring and Maintenance Effort. Sensor I/O Connectors (M12) Construction (XS2G Soldering Plug Connector Assembly)
I/O (M) XS XS/XS /XW XS XN XWB XS XS Water- and Environmentresistive FA Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant rating. A wide
More informationOptions. 24-VDC service power supply. RUN output. No Yes No 24 VDC 70 W NX-PD7001
NX-Series Power Supply Unit CSM_NX-PA_PD_DS_E_2_2 Powerful power supply unit to supply stable power to the NX-series controller. Stable power supply is available from the NX-series CPU Unit to each I/O
More informationG3F/G3FD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_5_3 International Standards for G3F Series, Same Profile as MY Power Relays Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket
More informationLong-time range model (0.1 min to 10 h) 24 VAC; SPDT H3RN-1 H3RN-11 12, 24 VDC DPST-NO H3RN-2 H3RN-21
Solid-state timer CSM DS_E_3_2 Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating
More informationModel Number Structure
Digital Panel Meter CSM DS_E_4_1 Easy-to-use, w-cost Digital Panel Meter that Accepts AC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. ghly visible display
More informationIndicator (Square) Ultra Bright LED Type
New Products Indicator (Square) Ultra Bright LED Type M2S Indicator Series with Square 40-mm Body. New models added with Ultra LEDs. New models with ultra bright LEDs added to singlescreen models. Previous
More informationLong Sensing-distance Capacitive Separate Amplifier Proximity Sensor E2J-W10MA 1M E2J-W20MA 1M. E2J-JC4A Amplifier Unit
Long Sensing-distance Capacitive Separate Amplifier Proximity Sensor Flat Capacitive Sensor with Separate Amplifier Ideal for Mounting on Robot Hands. Flat head is only 5.5-mm thick. Robotics cable ensures
More informationIndicator (Square) Ultra Bright LED Type
New Products Indicator (Square) Ultra Bright LED Type M2P Large Square-bodied Indicators. New models added with Ultra LEDs. New models with ultra bright LEDs added to single- models. Previous models not
More informationP7TF-IS16/OS16/OS08. I/O classification I/O points Internal I/O common Rated voltage Model 12 VDC P7TF-IS16 DC12 24 VDC P7TF-IS16 DC24 For inputs
I/O Terminal Socket PTF-IS/OS/OS CSM_PTF-IS_OS_OS_DS_E I/O Terminal Sockets to Flexibly Build Systems Mount either GT I/O Relays or GTA SSRs. Compact size for both Input and Output I/O Terminal Sockets:
More informationCS1W-B7A. CS-series B7A Interface Unit. It transmits 16 points of I/O signals per word with a pair of cables. Easy and minimized wiring effort,
CPU42 RUN ERR/ALM INH PRPHL/COMN OPEN MCPWR BUSY OPEN PERIPHERAL PORT (RS-232C) CS-series B7A Interface Unit CSM DS_E_3_2 It transmits 16 points of I/O signals per word with a pair of cables. Easy and
More informationE6J-C. Ultracompact Rotary Encoder with External Diameter of 20 mm. Ultracompact 20-mm-dia. Incremental Rotary Encoder. Ordering Information
Ultracompact 20-mm-dia. Incremental Rotary Encoder CSM DS_E_4_1 Ultracompact Rotary Encoder with External Diameter of 20 mm Incremental model External diameter of 20 mm. Resolution of up to 1,000 ppr.
More informationNE1A-SCPU Series. Safety Network Controller. Achieve Safety Control through Programming. Ordering Information. Specifications.
Safety Network Controller NEA-SCPU Series CSM_NEA-SCPU_Series_DS_E Achieve Safety Control through Programming. Compact Safety Controller. The NEA-SCPU-V provides built-in safety inputs and 8 built-in safety
More informationZN-CTX/-CTM. Portable Power Monitor. Easy and Quick Checking Power at the Worksite. Ordering Information. Portable Power Monitor
Portable Power Monitor ZN-CTX/-CTM CSM_ZN-CTX_-CTM_DS_E 2 Easy and Quick Checking Power at the Worksite Display and record power consumption without stopping the power supply. Battery driven, mounted with
More informationLimit Switch Connectors
CSM_LimitSwitch DS_E s (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness of the edges
More informationType High-sensitivity. Medium-sensitivity models models Sensed current 30 ma (fixed) 100 ma/200 ma 200 ma/500 ma 500 ma/1,000 ma Operating time
Ground Fault Relay CSM DS_E_9_3 Economical, Compact, High-performance, DIN 8 8-mm Ground Fault Relay for Low Voltages Performs continuous monitoring and detection of ground faults in low-voltage circuits
More informationXS2. Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort. Round Water-resistant Connectors (M12 Threads)
Round Water-resistant Connectors (M Threads) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors meet IP6 requirements and ensure a 9V-0 fire retardant
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationSnap-in (front mounting) Locking type. Terminals Solder terminals *1 Color Light gray Black A7BL-207 *2 A7BL *2
Thumbwheel Switch ABS/ABL CSM_ABS_ABL_DS_E Wide Range of Locking-type s Available Character height of. or. mm makes for easy-toview display. Installation is easy with snap-in mounting. The series includes
More informationMaintenance information. DRT2-series. Remote I/O Terminals Relay Output Terminals. DRT2-series Smart Slave Analog I/O Terminals.
CS-series Net Unit CSM DS_E_5_3 A Net Unit for the CS Series That Boasts Industry-leading Performance and Functions Features Allows control of up to 32,000 points (2,000 words) per master, and ensures
More informationFeatures various encoder interfaces and controls multiple analog servo drives at high speeds
CK3W Axial Interface Unit CK3W-AX Features various encoder interfaces and controls multiple analog servo drives at high speeds CK3W-AX Features One CK3W-AX Unit controls up to four axes Analog input type
More informationF3W-E. Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts. Picking Sensor. Features
Picking Sensor FW-E CSM_FW-E_DS_E Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts. A variety of part sizes can be handled: FW-D sensing width: 00 mm, FW-E sensing
More informationLimit Switch Connectors
CSM_LimitSwitch_Connector_DS_E Connectors (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness
More informationE2K-X4ME1 2M E2K-X4ME2 2M
Cylindrical Proximity Sensor EK- CSM_EK-_DS_E 1 General-purpose Threaded Sensor That Detects Metals and Non-metals Alike Detects both metallic and nonmetallic objects (water, oil, glass, plastic, etc.).
More informationG9H. Ordering Information. Hybrid Power Relay. List of Model. Accessories (Order Separately) Connecting Socket Mounting Plate
Hybrid Power elay CSM DS_E_6_ Hybridization of a Magnetic elay and an SS Achieves 0-A Switching for 0 Million Operations. UL/CSA certified (-US models). Using a triac to open and close the circuit reduces
More informationKnob-type Selector Switches
New Product Knob-type Selector Switches ANS/ANW Selector Switches with -mm Diameters. Universal Design That Emphasizes Color Coding, Workability, and Safety Easy to Use You can connect up to three Switch
More informationEE-SX97 40% Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. Slot-type Photomicrosensor.
Slot-type Photomicrosensor EE-SX CSM_EE-SX_DS_E Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. A built-in connector minimizes the shape and dimensional
More informationAluminum-detecting Proximity Sensor (Separate Amplifier Type)
Aluminum-detecting Proximity Sensor (Separate Amplifier Type) ECY Simple Teaching Function for Simple Adjustment. Easy-to-see Excess Gain Level Indicators. Detects aluminum, copper, and other non-ferrous
More informationCMOS Laser Sensor with Built-in Amplifier ZX0
New Product CMOS Laser Sensor with Built-in Amplifier ZX0 Stable Detection of Level Differences in the Order of 0.1 mm Dependable detection without being influenced by color, material, or surface conditions.
More informationType Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4 40 XW2B-40G5 *1 50 XW2B-50G5 60 XW2B-60G5 40 XW2B-40G5-T
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
More informationNPN output. 200 mm. Type Cable length Model Remarks
Retroreflective Photomicrosensor with Lens CSM DS_E_5_2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator.
More informationShape Model Measurement range Model Straight 50 to 300 mm. Straight 70 to 800 mm
Digital Amplifier Ultrasonic Sensor CSM DS_E_1_1 A Reflective Sensor That Handles All Types of Sensing Object Colors and Patterns Compact with a Broad Selection of Side-view Heads Slim with analog outputs
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes models that enable switching
More informationReuse Terminal Block Wiring When Replacing PLCs. Terminal Block Conversion Adapters. Overview. Features. System Configuration
s CSM_X7G-CS - DS_E_1_1 Reuse Terminal Block iring hen Replacing PLCs 32-point Terminal Block Conversion s for Fujitsu Connectors X7G-CS01-1/CS01-2/CS01-3 16-point Terminal Block Conversion for One-slot
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
More informationReliable Detection Unaffected by PCB Holes or Notches. PCB Sensors. Ordering Information. Sensors [Refer to Dimensions on page 4.
PCB Sensors ES-LS@ CSM_ES-LS DS_E_5_2 Reliable Detection Unaffected by PCB Holes or Notches High-limit ES-LS@ is suitable for incorporation in devices. Wide-range ES-LS@W is ideal for detecting tall components
More informationNo. of I/O points Safety inputs Test outputs Safety outputs NE1A-SCPU01-EIP NE1A-SCPU02-EIP 1.0
Safety Network Controller CSM_NE1A-SCPU0_-EIP_DS_E_1_1 Directly Connected to SYSMAC CS/CJ Series via EtherNet/IP Monitors safety systems via EtherNet/IP. Equipped with master functions of DeviceNet Safety.
More informationModel. 1 m *1. [100 mm] [100 mm] [100 mm] [100 mm]
Transparent Object Detection Sensor ES-R CSM_ES-R_DS_E_0_ Ideal for Detecting Glass Wafers and Other Transparent Objects Detects glass wafers and CD glass circuit boards. Be sure to read Safety Precautions
More informationE2EC. High-sensitivity DC 2-Wire Sensors and Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E High-sensitivity DC -Wire Sensors and Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded
More informationModel Rectangular Square Round. Solder terminals A165K-J Series A165K-A Series A165K-T Series. (2) Number of Notches/Resetting Method
Key-type Selector Switch (Detachable) (Cylindrical 16-dia.) A165K CSM_A165K_DS_E_3_4 Separate Construction with Cylindrical 16-dia. Body Short mounting depth, less than 28.5 mm below panel Wide range of
More informationPower supply voltage Output configuration Output phases Resolution (pulses/rotation) Model. 100, 200, 360 E6A2-CWZ5C (resolution) 0.
Incremental 25-mm-dia. Rotary Encoder CSM DS_E_5_1 Compact Encoder with External Diameter of 25 mm Incremental model External diameter of 25 mm. Resolution of up to ppr. Be sure to read Safety Precautions
More informationE2EC. Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E_8_ Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded in metal. Robotics cables provided
More informationD4GS-N CSM_D4GS-N_DS_E_7_4
Slim Safety Door Switch D4GS-N CSM_D4GS-N_DS_E_7_4 Slim Safety Door Switches with IP67 Rating Slim design with a width of only 17 mm (three-contact models). Reversible design allowing either front or rear
More informationM16. Cylindrical 16-dia. Indicator. Indicator (Cylindrical 16-dia.) List of Models. Same basic design as the A16 Pushbutton Switch.
Indicator (Cylindrical 16-dia.) CSM DS_E_6_1 Cylindrical 16-dia. Indicator Same basic design as the A16 Pushbutton Switch. Refer to Safety Precautions for All Pushbutton Switches and Safety Precautions
More informationOutput configuration Contact form Operation indicator Cable length Model PNP open collector. 1 m D5F-2B10 (+ common) ON when operated
High-precision Optical Switch D5F CSM_D5F_DS_E_2_2 Optical System Achieves 1-μm Operating Position Repeatability in this 4-way Switch No-contact structure for high reliability. Ceramic materials in measuring
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationXW3B. Connector Terminal Boxes. Ratings and Specifications. Compatible Connectors. Materials and Finish
es XWB Series Includes New Lightweight, Low-profile Connector Terminal Boxes for Use Outside of Control Boxes to Centralize I/O with Reduced Labor and Greater Environmental Resistance Tough model with
More informationNYM CSM_NYM_DS_E_2_2. Very stylish, very industrial. Features. Industrial PC Platform NY-series Industrial Monitor
Industrial PC Platform NY-series Industrial Monitor CSM DS_E_2_2 Very stylish, very industrial Our new industrial-quality touchscreen monitors are good-looking but more importantly they also enable the
More informationF3W-D. Compact, Resistant to Mutual Interference, and Ideal for Picking a Variety of Parts. Picking Sensor. Features
Picking Sensor FW-D CSM_FW-D_DS_E Compact, Resistant to Mutual Interference, and Ideal for Picking a Variety of Parts. Mounts to a parts rack and uses indicators to show parts picking procedures. Functions
More informationNX-TS. NX-series Temperature Input Unit
NX-series Temperature Input Unit NX-TS CSM_NX-TS_DS_E_1_1 Temperature Input Units for Low-speed and High-speed*, High-precision* Temperature Control in Combination with NJ Series NX-series Temperature
More informationModel Number Structure
Digital Panel Meter CSM DS_E_2_1 Easy-to-use, w-cost Digital Panel Meter that Accepts AC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. ghly visible display
More informationG3S4-A 5 VDC 12 VDC 24 VDC 0.6 A at 75 to 264 VAC (See note 1.) G3S4-A1 5 VDC 12 VDC 24 VDC Yes G3SD-Z01P-PD 1 A at 3 to 26 VDC (See note 2.
Terminal SSR G3S CSM_G3S_DS_E_7_ Compact Terminal SSR with Outputs Easy-to-use SSR block that combines four compact G3S SSRs, sockets, and heat sink in one unit. Easy wiring with separate I/O terminal
More informationModel Number Structure
Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with analogue setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More informationOil-resistant, Long-range Photoelectric Sensor with Metal Housing
Oil-resistant, Long-range Photoelectric Sensor with Metal Housing ES-C Water- and Oil-resistant Photoelectric Sensor with Metal Housing Used for Longrange Sensing Excellent resistance against the water
More informationModel Configuration. Digital Display (25 mm) M7E. Unit Configuration. Zero Suppression Incorporated
Digital Display (25 mm) CSM 25mm_DS_E_4_1 Zero Suppression Incorporated Single-color (red or green) and two-color (red or green selectable) displays with a character height of 25 mm are available for a
More information3. Input KJ: Thermocouple P: Platinum resistance thermometer T: Thermocouple/platinum resistance thermometer (universal-input)
Temperature Controllers CSM DS_E Easy Setting Using DIP Switch and Simple Functions in DIN mm-size Temperature Controllers Easy setting using DIP switch. s with two alarms added to Series, ideal for temperature
More information