SENSORS FOR AUTOMATION

Transcription

1 SENSORS FOR AUTOMATION LEVEL PRESSURE TEMPERATURE Canton Rd. T: F:

2 TABLE OF CONTENTS 1 Siemens CLS100 Capacitive Point Level Sensor 11 Siemens LU180 Ultrasonic Level Transmitter Siemens CLS200 Capacitive Point Level Sensor Siemens CLS300 Capacitive Point Level Sensor Siemens LVL100 Vibrating Point Level Sensor Siemens LVL200 Vibrating Point Level Sensor Siemens LVS100 Vibrating Point Level Sensor Siemens LVS200 Vibrating Point Level Sensor Transducers Direct TDEPD Field-Programmable Pressure Switch/Transducer with Integrated LED Display TE Sensor Solutions AST4000 Pressure Transducer Siemens LH100 Submersible Pressure Sensor Siemens TS500 Temperature Sensors Define Instruments Merlin Universal Process Display with Simple USB Setup 8 Siemens ULS200 Ultrasonic Point Level Sensor 17 Siemens RD200 Universal Indicator 9 Siemens The Probe Ultrasonic Level Transmitter 18 Define Instruments Twin Link Point-to-Point Wireless I/O Transmitters 10 Siemens LU150 Ultrasonic Level Transmitter 4451 Canton Rd. T: F:

3 LEVEL SENSORS Siemens CLS100 Capacitive Point Level Sensor Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Pointek CLS100 s short insertion length of 100 mm (4 ) and versatility in various applications and in vessels or pipes makes it a good replacement for traditional capacitance sensors. Its advanced tip-sensing technology provides accurate, repeatable switchpoint performance. The PPS (Polyphenylene sulfide) probe [optional PVDF (Polyvinylidene Fluoride)] is chemically resistant with an effective process operating temperature range from -30 to +100 C (-22 to +212 F) (7ML5501), and -10 to +100 C (+14 to +212 F) (7ML5610). The fully potted design ensures reliability in a vibrating environment such as agitated tanks up to 4 g. When used with a SensGuard protection cover, the CLS100 is protected from shearing, impact and abrasion in tough primary processes. The Pointek CLS100 is available in three versions. The integral cable version has a stainless steel process connection and probe options of PPS or PVDF. The fully synthetic version has a thermoplastic polyester enclosure with a PPS process connection combined with a PPS probe. The standard enclosure version has a thermoplastic polyester enclosure with a stainless steel process connection in combination with a PPS or PVDF probe. Product Specifications 100mm (4 ) -30 to 100 C (-40 to 212 F) Process Pressure: Up to 10 bar g (145 psi g) Easy installation with verification by built-in LED Low maintenance with no moving parts Sensitivity adjustment Integrated cable or PBT enclosure versions available Intrinsically Safe, Dust Ignition Proof and General Purpose options available 7ML5501-0AA10 7ML5501-0AA30 7ML5501-0AC10 7ML5501-0AC30 Capacitive Level Switch with ¾ Process Connection, with General Purpose Rating, and Integral Cable. Capacitive Level Switch with ¾ Process Connection, with General Purpose Rating, and PPS Enclosure. Capacitive Level Switch with ¾ Process Connection, with Hazardous Area Rating, and Integral Cable. Capacitive Level Switch with ¾ Process Connection, with Hazardous Area Rating, and PPS Enclosure. $227 $274 $289 $336 SENSORS FOR AUTOMATION 1

4 Product Specifications Rod: 1m (40 inch) Cable: 25m (82 ft) -40 to 400 C ( F) LEVEL SENSORS Siemens CLS200 Capacitive Point Level Sensor Pointek CLS200 is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces. The digital version (with PROFIBUS PA) includes a display and provides additional diagnostic features. The Pointek CLS200 is offered in standard and digital versions. The standard version has 3 LED indicators with basic relay and solid-state switch alarms. The digital version provides an integral LCD display for standalone use, and also provides PROFIBUS PA communication (Profile version 3.0, Class B) for connection to a network. The power supply is galvanically isolated and accepts a wide range of voltages (12 to 250 V AC/DC for standard version and 12 to 30 V DC for digital version). The stainless steel and PPS (PVDF optional) materials used in the probe construction provide a temperature rating up to +125 C (+257 F) on the process wetted portion of the probe. The switch responds to any material with a dielectric constant of 1.5 or more by detecting a change in oscillating frequency, and it can be set to detect before contact or on contact with the probe. The CLS200 operates independently of the tank wall or pipe so it does not require an external reference electrode for level detection in a non-conductive vessel such as concrete or plastic. Please contact FLW Southeast for application specific model and pricing information. Process Pressure: Up to 35 bar g (511 psi g) Potted construction protects signal circuit from shock, vibration, humidity and/or condensation High chemical resistance Level detection independent of tank or pipe earth reference Insensitive to product buildup due to high frequency oscillation High sensitivity allows installation in a wide range of liquids, solids or slurry applications Integral LCD display allows for easy setup of CLS200 when you can configure switching threshold, even under the most demanding process conditions (digital version only) Extended rod, cable and sanitary versions available Standard version: 3 LED indicators for adjustment control, output status and power Digital version: integral LCD display, and PROFIBUS PA communication SENSORS FOR AUTOMATION 2

5 Product Specifications LEVEL SENSORS Siemens CLS300 Capacitive Point Level Sensor Pointek CLS300 is an inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output. It is ideal for detecting liquids, solids, slurries, foam and interfaces in demanding conditions where high pressure and temperatures are present. The digital version (with PROFIBUS PA) includes a display and provides additional diagnostic features. The Pointek CLS300 is offered in standard and digital versions. The standard version has 3 LED indicators with basic relay or solid-state switch alarms. The digital version provides an integral LCD display for standalone use, with PROFIBUS PA communication (Profile version 3.0, Class B) when required. Solid-state switch alarm is standard. The robust design of CLS300 makes it specifically applicable for heavy solids applications where abrasive materials occur as in the mining industry. The fully potted electronics are unaffected by condensation, dust or vibration. Wetted parts are made of stainless steel or stainless steel with a PFA shield for high chemical resistance. Ceramic inserts are supplied with high temperature CLS300 devices. Materials with low or high dielectric constants can be accurately detected. The unique Active Shield suppresses interference from material buildup. The unique modular design of the Pointek CLS300 provides a wide range of configurations, process connections, extensions and approvals to meet the temperature and pressure requirements of specific applications. The modular design makes ordering easier and reduces stocking requirements. A wide range of probe configurations are available, including rod and cable versions. Rod: 1m (40 inch) Cable: 25m (82 ft) -40 to 400 C ( F) Process Pressure: Up to 35 bar g (511 psi g) Active-Shield technology so measurement is unaffected by material buildup in active shield section Performs in extremely abrasive conditions because of solid rod construction Standard version: 3 LED indicators for adjustment control, output status and power Digital version: integral LCD display, and PROFIBUS PA communication Push-button calibration, fullfunction diagnostics Multiple output options Please contact FLW Southeast for application specific model and pricing information. SENSORS FOR AUTOMATION 3

6 LEVEL SENSORS Siemens LVL100 Vibrating Point Level Sensor SITRANS LVL100 is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand applications, as well as pump protection. It is ideal for use in confined spaces. SITRANS LVL100 is a compact level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With an insertion length of only 40 mm (1.57 ), SITRANS LVL100 can be mounted in small pipes and confined space applications. It is also virtually unaffected by the chemical and physical properties of the liquid. The LVL100 can also be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration. The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approximately 1200 Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices. Product Specifications 40 mm (1.5 ) insertion -40 to 150 C (-40 to 302 F) Process Pressure: -1 to 64 bar g (-14.5 to 928 psi g) Proven vibrating level switch technology for liquids Compact insertion length of 40 mm (1.57 ) for confined space applications Fault monitoring for corrosion, loss of vibration, or line break to the piezo drive 7ML5745-1AA21-1BAO 7ML5745-1AA22-1AAO 7ML5745-1BA21-1BAO 7ML5745-1BA22-1BAO Vibrating Level Switch with Standard Temperature Range, ¾ Process Connection, and Relay Output. Vibrating Level Switch with Standard Temperature Range, ¾ Process Connection, and Transistor Output. Vibrating Level Switch with Extended Temperature Range, ¾ Process Connection, and Relay Output. Vibrating Level Switch with Extended Temperature Range, ¾ Process Connection, and Transistor Output. $212 $201 $231 $231 SENSORS FOR AUTOMATION 4

7 LEVEL SENSORS Siemens LVL200 Vibrating Point Level Sensor SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high, low, and demand applications, as well as pump protection. For use in SIL-2 applications. SITRANS LVL200 is a level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With a tuning fork insertion length of only 40 mm (1.57 ), SITRANS LVL200 can be mounted in small pipes and applications with confined space. The LVL200 can be used to measure products with a minimum density of >0.5 g/cm³ (0.018 lbs/in³). The LVL200 can be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration. SITRANS LVL200 continuously monitors faults via frequency evaluation, providing early detection of strong corrosion or damage on the tuning fork, loss of vibration, or a line break to the piezo drive. The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approx Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices. Product Specifications 40 mm to 4 m (1.5 to 13 ft) -50 to 250 C (-58 to 482 F) Process Pressure: -1 to 64 bar g (-14.5 to 928 psi g) Proven vibrating level switch technology for liquids Compact insertion length of 40 mm (1.57 ) for confined space applications Fault monitoring for corrosion, loss of vibration or line break to the piezo drive SIL 2 qualified for high level and dry run applications Hygienic process connections Please contact FLW Southeast for application specific model and pricing information. SENSORS FOR AUTOMATION 5

8 Product Specifications LEVEL SENSORS Siemens LVS100 Vibrating Point Level Sensor SITRANS LVS100 is a vibrating point level switch for bulk solids. SITRANS LVS100 detects high, low or demand levels of dry bulk solids in bins, silos or hoppers. SITRANS LVS100 has a compact design and can be top, side, or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged. A signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition. 170 mm to 2 m (6.7 to 6.5 ft) -40 to 150 C (-40 to 302 F) Process Pressure: Up to 10 bar g (145 psi g) High resistance to mechanical forces Strong resistance to external vibrations Rotatable enclosure for ease of installation and wiring Suitable for point level detection of materials starting at a bulk density of 60 g/l (3.8 lb/ft³) Customer desired extensions up to 2000 mm (8 ) Durable short fork option starting at 170 mm (6.7 ) insertion length 7ML5735-1AB11-0AA0 7ML5735-1AB11-0BA0 Vibration Level Switch with Universal Power Supply, DPDT Relay Output, 1 ¼ NPT Process Connection, 170mm Extension Length, and General Purpose Classification. Vibration Level Switch with Universal Power Supply, DPDT Relay Output, 1 ¼ NPT Process Connection, 170mm Extension Length, and Hazardous Area Classification. $354 $451 SENSORS FOR AUTOMATION 6

9 Product Specifications LEVEL SENSORS Siemens LVS200 Vibrating Point Level Sensor SITRANS LVS200 is a vibrating point level switch for high or low levels of bulk solids. The standard LVS200 detects high, low or demand levels of dry bulk solids in bins, silos or hoppers. The liquid/solid interface version can also detect settled solids within liquids or solids within confined spaces such as feed pipes. It is designed to ignore liquids in order to detect the interface between a solid and a liquid. A pipe extension version is available with either the standard or liquid/solid interface electronics and fork, separated by a customer supplied 1 pipe. SITRANS LVS200 has an optional 4 to 20 ma output for monitoring buildup on the fork to determine when preventative maintenance should be performed in sticky applications. The LVS200 has a compact design and can be top, side or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged. A signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition. Rigid extension: 165 mm to 4 m (6.5 to 13 ft) Cable extension: 700 mm to 20 m (27.5 to 65 ft) -40 to 150 C (-40 to 302 F) Process Pressure: Up to 10 bar g (145 psi g) High resistance to mechanical forces Strong vibration resistance to high bulk material loads Rotatable enclosure Suitable for low density material: standard version, 20 g/l (1.3 lb/ft³); liquid/solid interface version, 50 g/l (3 lb/ft³), and low density option min. 5 g/l (0.3 lb/ft³) Customer desired extensions up to mm (787 ) Optional detection of solids within liquid Durable short fork option with 165 mm (6.5 inch) insertion length Please contact FLW Southeast for application specific model and pricing information. SENSORS FOR AUTOMATION 7

10 Product Specifications LEVEL SENSORS Siemens ULS200 Ultrasonic Point Level Sensor SITRANS ULS200 is an ultrasonic non-contacting switch with two switch points for level detection of bulk solids, liquids and slurries in a wide variety of industries; ideal for sticky materials. The measuring range for bulk solids is max. 3 m (9.8 ft) and 5 m (16.4 ft) for liquids and slurries. Unlike invasive contacting devices, there is no material buildup on the sensor. The level switch has a rugged design, combining the transducer and electronics in one durable device. It has no moving parts and is virtually maintenance-free. The transducer, available in ETFE or PVDF copolymer, is inert to most chemicals. This means the device can be used in the chemical, petrochemical, water and wastewater industries. A sanitary version of the ULS200, with an industry standard flange option, is easy to remove from the application for cleaning. It thus satisfies the prerequisites for use in the food, beverage and pharmaceutical industries. The Pointek ULS200 delivers superior performance while reducing maintenance, downtime and equipment replacement costs. Liquids: 0.25 m to 5 m (0.8 to 16 ft) Solids: 0.25 m to 3 m (0.8 to 10 ft) -40 to 60 C (-40 to 140 F) Process Pressure: Up to 0.5 bar g (7.25 psig) 2 switch outputs for high-high, high, low and low-low level alarms or pump up/pump down control Integral temperature compensation AC or DC power supply Electronics provided with failsafe function Threaded and sanitary fitting clamp process connections Polycarbonate or aluminum enclosures, Type 6/NEMA 6/ IP67 Easy, two-button programming 7ML1510-1KE02 7ML1510-3KE04 7ML1510-1KE04 7ML1510-3KA04 Ultrasonic Level Switch with 24VDC Power, (2) Relay Outputs, 2 NPT Process Connection, and Polycarbonate Housing. Ultrasonic Level Switch with 120VAC Power, (2) Relay Outputs, 2 NPT Process Connection, and Polycarbonate Housing. Ultrasonic Level Switch with 24VDC Power, (2) Relay Outputs, 2 NPT Process Connection, and Aluminum Housing. Ultrasonic Level Switch with 120VAC Power, (2) Relay Outputs, 2 NPT Process Connection, and Aluminum Housing. $928 $1,214 $1,086 $1,261 SENSORS FOR AUTOMATION 8

11 LEVEL SENSORS Siemens The Probe Ultrasonic Level Transmitter The Probe is a short-range integrated ultrasonic level transmitter, ideal for liquids and slurries in open or closed vessels. The transducer is available in PVDF copolymer, making the device suitable for use in a wide variety of applications. The Probe is easy to install and maintain, and can be quickly removed for cleaning as required by the food, beverage and pharmaceutical industries. The reliability of the level data is based on the Sonic Intelligence echo processing algorithms. A filter discriminates between the true echo and false echoes from acoustic or electrical noises and agitator blades in motion. The ultrasonic pulse propagation time to the material and back is temperature-compensated and converted into distance for display, analog output and relay actuation. Product Specifications 0.25 to 5 m (0.8 to 16.4 ft) -40 to 60 C (-40 to 140 F) Output: One relay, 4 to 20 ma (3-wire) 4 to 20 ma (2-wire) Easy to install, program and maintain Accurate and reliable Sanitary models available Patented Sonic Intelligence echo processing Integral temperature compensation 7ML1201-2EE00 Ultrasonic Level Transmitter with 0 8M Measurement Range, 2 NPT Process Connection, (1) Relay Output, and 24VDC 3-Wire Configuration. $1,232 SENSORS FOR AUTOMATION 9

12 LEVEL SENSORS Siemens LU150 Ultrasonic Level Transmitter SITRANS LU150 is a short-range integrated ultrasonic level transmitter. This general purpose, 2 wire, 4 to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft). The transducer is available in PVDF copolymer, making the device suitable for use in a wide variety of applications. SITRANS LU150 is easy to install and maintain, and can be quickly removed for cleaning as required by the food, beverage and pharmaceutical industries. The reliability of the level data is based on the Sonic Intelligence echo processing algorithms. A filter discriminates between the true echo and false echoes from acoustic or electrical noises and agitator blades in motion. The ultrasonic pulse propagation time to the material and back is temperature-compensated and converted into distance for display, analog output. Product Specifications 0.25 to 5 m (0.8 to 16.4 ft) Standard: -30 to +60 C (-22 to +140 F) Metallic mounting: -20 to +60 C (-4 to +140 F) Output: 4 to 20 ma (2-wire) Easy to install, program, and maintain Accurate and reliable Sanitary models available Patented Sonic Intelligence echo processing Integral temperature compensation 7ML5201-0EC0 Ultrasonic Level Transmitter with 0 5M Measurement Range, 2 NPT Process Connection, and 24VDC 2-Wire Configuration. $672 SENSORS FOR AUTOMATION 10

13 LEVEL SENSORS Siemens LU180 Ultrasonic Level Transmitter SITRANS LU180 is a short-range integrated ultrasonic level transmitter. This intrinsically safe, 2 wire, 4 to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials in open or closed vessels to 5 m (16.4 ft). The transducer is available in PVDF copolymer, making the device suitable for use in a wide variety of applications. SITRANS LU150/LU180 is easy to install and maintain, and can be quickly removed for cleaning as required by the food, beverage and pharmaceutical industries. The reliability of the level data is based on the Sonic Intelligence echo processing algorithms. A filter discriminates between the true echo and false echoes from acoustic or electrical noises and agitator blades in motion. The ultrasonic pulse propagation time to the material and back is temperature-compensated and converted into distance for display, analog output. Key Applications Chemical storage vessels, filter beds, mud pits, liquid storage vessels, food applications 0.25 to 5 m (0.8 to 16.4 ft) Standard: -40 to +60 C (-40 to +140 F) Metallic mounting: -20 to +60 C (-4 to +140 F) Output: 4 to 20 ma (2-wire) Easy to install, program, and maintain Accurate and reliable Sanitary models available Patented Sonic Intelligence echo processing Integral temperature compensation 7ML5202-0EC0 7ML5202-0JCO Ultrasonic Level Transmitter with 0 5M Measurement Range, 2 NPT Process Connection, Hazardous Area Classification, and 24VDC 2-Wire Configuration. Ultrasonic Level Transmitter with 0 5M Measurement Range, 4 Sanitary Process Connection, Hazardous Area Classification, and 24VDC 2-Wire Configuration. $999 $1,071 SENSORS FOR AUTOMATION 11

14 Product Specifications Up To 10,000 PSI Accuracy: 0.5% of Maximum Operating Pressure PRESSURE SENSOR Transducers Direct TDEPD Field-Programmable Pressure Switch/Transducer with Integrated LED Display What makes the patented TDEPD Series stand apart is the unique LED display - which allows for 360 scrolling, or you can lock the display in one location. It also features field programmable set points and hysteresis. Because it is built on Transducers Direct s TD1000 technology, the TDEPD Series incorporates redundant sensing elements, allowing for notification that the sensor needs to be replaced should one of the sensing elements fail (maintenance mode), eliminating operational downtime. The TDEPD Series pressure switch/transducer is available in (1) digital output, (2) digital outputs, and (1) digital output & (1) analog output configurations. Unit operates from 10.5 to 28 VDC, and is IP67 certified. Overpressure: 2x Rated Pressure or Optional 4x & 10x Temperature: -40 to 100 C (-40 to 212 F) Product Features Maintenance Mode (Redundant Sensing Notification) 4-Digit, Bi-Color Display (Red or Green) with 360 Scrolling or Lock-In Location 250 ma max (PNP) or 200 ma max (NPN), and/or Optional Analog Output: (10 VDC or 20 ma - Field Selectable) Wide Variety of Pressure Ranges up to 10K PSIG Spike Monitoring Technology (SMT) TDEPD Q9 TDEPD Q9 TDEPD Q9 TDEPD Q9 TDEPD2010K03Q9 TDM12-5F-CR-06M Transducers Direct Pressure Switch with 0-50 PSI Pressure Range, Scrolling or Lockable Display, (2) Switch Outputs, ¼ NPT Process Connection, and 2X Over Pressure. Transducers Direct Pressure Switch with PSI Pressure Range, Scrolling or Lockable Display, (2) Switch Outputs, ¼ NPT Process Connection, and 2X Over Pressure. Transducers Direct Pressure Switch with PSI Pressure Range, Scrolling or Lockable Display, (2) Switch Outputs, ¼ NPT Process Connection, and 2X Over Pressure. Transducers Direct Pressure Switch with 0-1,000 PSI Pressure Range, Scrolling or Lockable Display, (2) Switch Outputs, ¼ NPT Process Connection, and 2X Over Pressure. Transducers Direct Pressure Switch with 0-10,000 PSI Pressure Range, Scrolling or Lockable Display, (2) Switch Outputs, ¼ NPT Process Connection, and 2X Over Pressure. Cable Assembly with Molded Right Angle, (5) pin M12 Connector with 6 Meter Cable, and (5) Conductor 22 AWG, Gray PVC Outer Sheath, 250V, 4A, Shielded, IP67. $289 $289 $289 $289 $289 $45 Please contact FLW Southeast for pricing & availability of other configurations. SENSORS FOR AUTOMATION 12

15 Product Specifications Up to 10,000 PSI Accuracy: 0.5% BFSL PRESSURE SENSORS TE Sensor Solutions AST4000 Pressure Transducer The AST4000 pressure transducer is designed with a one piece stainless steel or nickel alloy sensing element. This sensing element is free of welds, O-rings, or fluid filled cavities, resulting in long term stability and an accurate, repeatable output. The sensor can be configured with a variety of voltage output signals or 4-20mA loop powered. Packaged with a stainless steel housing, various process connection thread choises, and either cable or connectors, the pressure transducer can fit many existing designs as well as offer flexibility for new designs. Overpressure: 2x Rated Pressure, Minimum Temperature: -40 to 85 C (-40 to 185 F) Product Features High Strength Stainless Steel Construction No Oil, Welds or Internal O-Rings Low Static and Thermal Errors Compatible with Wide Variety of Liquids and Gases EMI/RFI Protection and UL/cUL 508 Approved (with Housing) AST4000P00030P4I1000 AST4000P00100P4I1000 AST4000P00500P4I1000 AST4000P01000P4I1000 Gauge Pressure Transducer with 0-30 PSIG Measurement Range, 316L Stainless Steel Body, ½ NPT Process Connection, 4-20 ma Analog Output, and Large DIN (18mm) A Connector. Gauge Pressure Transducer with PSIG Measurement Range, 316L Stainless Steel Body, ½ NPT Process Connection, 4-20 ma Analog Output, and Large DIN (18mm) A Connector. Gauge Pressure Transducer with PSIG Measurement Range, 316L Stainless Steel Body, ½ NPT Process Connection, 4-20 ma Analog Output, and Large DIN (18mm) A Connector. Gauge Pressure Transducer with PSIG Measurement Range, 316L Stainless Steel Body, ½ NPT Process Connection, 4-20 ma Analog Output, and Large DIN (18mm) A Connector. A09171 Mating Connector Large DIN with Strain Relief Gland. $10 A11028 Mating Connector Large DIN with Female ½ NPT Conduit Connection. $160 $160 $160 $160 $10 SENSORS FOR AUTOMATION 13

16 Product Specifications 0.3% Long-Term Stability: 0.25% Annual PRESSURE SENSORS Siemens LH100 Submersible Pressure Sensor The SITRANS LH100 series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 ma. The transmitter consists of a stainless steel housing (Ø 23,4 mm) with mechanical protection IP 68, a piezoresistive sensor with ceramic diaphragm. The transmitter cable has a diameter of Ø 6 mm and also contains a vent pipe for connection to the atmosphere. Measuring range: 0 4 mh2o ( fth2o) to 0-20m H2O (0 66 fth2o) Compact design Corrosion resistant material housing: stainless steel 316L cable: sheath made of PE cable length: standard 10, 20 or 30 m, special length up to 50 m possible Explosion protected version acc. ATEX II 1 G Ex ia IIC T4 Ga and IEC Ex Ex ia IIC T4 Ga available Standard Measuring Set Transmitter Cable hanger Junction box 7MF1572-2EA10 7MF1572-2HA10 7MF1572-2KA10 Submersible Pressure Transmitter with 0-15 H2O Measurement Range, 33 Cable Length, and 4-20 ma Analog Output. Submersible Pressure Transmitter with 0-30 H2O Measurement Range, 66 Cable Length, and 4-20 ma Analog Output. Submersible Pressure Transmitter with 0-60 H2O Measurement Range, 98 Cable Length, and 4-20 ma Analog Output. 7MF1572-8AA Junction Box. $86 7MF1572-8AB Cable Hanger. $21 $696 $801 $909 SENSORS FOR AUTOMATION 14

17 Product Specifications Output: direct sensor signal 4 20 ma (TH100/TH200) HART (TH300) PA (TH400) FF (TH400) TEMPERATURE SENSORS Siemens TS500 Temperature Sensors The industry-grade temperature sensor supports a wide range of measuring go from basic applications to solutions in harsh environment. A benefit for the user is the use of standard components even for individual configurations. This ensures the modular concept consisting of a barstock or tubular thermowell, extension and connection head with optional integrated transmitter or display. Version for intrinsic safety, flameproof and non sparking are available. Measurement Pt 100 Basic: C Pt 100 Extended: C Thermocouple C Operating Temperature: C (+85 C with transmitter) Head Enclosure: IP54-68 (depends of the type of connection head and cable gland) Exchangeable during operation Wide application range due modular design Explosions protection according ATEX and IEC EX intrinsic safety, flameproof and non sparking With optional local indicator 7MC6522-1KS16-9JA1-Z+N0G+T30 7MC6522-1KS22-9JA1-Z+N0G+T30 7MC6522-1KS26-9JA1-Z+N0G+T30 Temperature Transmitter with 4 Insertion Length, 3 Extension, ¾ NPT Process Connection, RTD Sensor, 2-Wire HART Head Mounted Temperature Transmitter, and 316SS Thermowell. Temperature Transmitter with 6 Insertion Length, 3 Extension, ¾ NPT Process Connection, RTD Sensor, 2-Wire HART Head Mounted Temperature Transmitter, and 316SS Thermowell. Temperature Transmitter with 8 Insertion Length, 3 Extension, ¾ NPT Process Connection, RTD Sensor, 2-Wire HART Head Mounted Temperature Transmitter, and 316SS Thermowell. $898 $917 $980 SENSORS FOR AUTOMATION 15

18 Universal Input Temperature Input: Thermocouple (B/E/J/K/N/R/S/T types), RTD (Pt100/Pt1000), NTC (10K Beta 3984/3435) PROCESS DISPLAYS & WIRELESS TRANSMITTERS Define Instruments Merlin Universal Process Display with Simple USB Setup The Merlin process indicator accepts analog inputs from a range of industrial sensors, including: process, temperature, flow, frequency, and voltage from 200mV to 300V. It features a wide range power supply that suits both AC mains and 24V DC applications, and supplies the excitation required for common sensors and transmitters. The Merlin digital panel meter can be scaled into any engineering unit, and the result displayed on the large digit super-bright LED display. Auto ranging is available to increase the dynamic range of viewable data. The Merlin R2A adds two Form A 3 Amp relays for a variety of control and alarm functions, and a 4-20mA active output for retransmission to PLCs and SCADA systems. This panel indicator has been designed for harsh industrial environments. With an IP65 sealed bezel and extensive testing of noise effects to and beyond CE requirements, the Merlin LED panel meter provides a tough and reliable application solution. No More Accidental Changes to Meter Set-Up With programmable panel meters one slip of the finger can be the root of many headaches. But with the Merlin you don t have to worry! There s no buttons on the unit so you don t need to stress about accidental parameter alterations during handling. Instead set-up is via your PC using a USB connection. Process Input: Current (0/ mA DC), Voltage (various ranges from -10V to 300V DC) Digital Input: NPN/PNP Open Collector ( Hz) Potentiometer Input: <1kΩ to 20kΩ AC Current Sensor Input: ACCS-010/ACCS-420 Key Features Universal AC/DC power supply (24-250V AC, V DC) Optional Relay Outputs Optional isolated 4 20mA Output 22V Excitation to Power Most 2-Wire Transmitters Flexible 32-Point Linearization Table MER-UV MER-UV-R2A BRIDGE-KEY Define Instruments Merlin Universal Input 4-Digit Process Display with Universal Voltage Power Supply. Define Instruments Merlin Universal Input 4-Digit Process Display with Universal Voltage Power Supply, (2) Relay Outputs, & (1) Analog Output. Define Instruments Bridge Key Universal USB Communications Kit. $192 $249 $85 Please contact FLW Southeast for pricing & availability of other configurations. SENSORS FOR AUTOMATION 16

19 Easy setup and programming via front panel buttons or remotely using RD software Display readable in sunlight Universal input: accepts current, voltage, thermocouple, and RTD signals PROCESS DISPLAYS Siemens RD200 Universal Indicator The Siemens SITRANS RD200 is a universal remote display for level, flow, pressure, temperature, weighing, and other process instruments. Data can be remotely collected, logged and presented from as many as 100 displays on your local computer using the free downloadable RD Software. The display accepts a single input of current, voltage, T/C, and RTD. This makes the RD200 an ideal fit for use with most field instruments. The RD200 can be set up as a standard panel mount, or combined with optional enclosures to allow it to house up to 6 displays. Single or dual 24 V DC transmitter power supply Analog to Modbus RTU conversion as standard feature Two optional relays for alarm indication or process control applications Linear or square root function supported Meter Copy feature to reduce setup time, cost, and errors RD software supports remote configuration, monitoring and logging for up to 100 displays Other features include: 4 to 20 ma Analog Output Option, pump alternation control, and optional NEMA 4 and 4X field enclosures Large display option for improved visibility at greater distances 7ML5740-1AA01-0A 7ML5740-2AA01-0A 7ML5740-1BB01-0A 7ML5740-1BC01-0A Universal Process Display with VAC Power. $229 Universal Process Display with VDC Power. $290 Universal Process Display with VAC Power, 24 VDC Transmitter Excitation, and (2) Relay Outputs. Universal Process Display with VAC Power, 24 VDC Transmitter Excitation, and (1) 4-20 ma Analog Output. 7ML1930-1CG Thermoplastic Enclosure for (1) RD200 Display. $197 $351 $396 7ML1930-1CK Thermoplastic Enclosure for (4) RD200 Displays. $392 SENSORS FOR AUTOMATION 17

20 Out-of-the-Box Ready for 4-20mA I/O Applications PROCESS DISPLAYS & WIRELESS TRANSMITTERS Define Instruments Twin Link Point-to-Point Wireless I/O Transmitters When it s just too far or too expensive to lay cable for signal communications, turn to Define Instruments Twin Link units. Twin Link s powerful control and communication capabilities means you get the data you need to the place you need it without the hassles. Twin Link I/O units transmit data up to 1.5km with line of sight (LOS). If your line of sight is obscured or you need to reach further, just add a repeater unit. Simple Setup Via Your PC in Just Minutes Setting up your wireless Point-to-Point system is fast and easy with Define ToolBox. Simply connect the Twin Link Input Node (P2P-I) to your PC via USB (Bridge Key required), and you ll be up and running in no time.select from a wide range of precalibrated input types, easily scale your analog outputs, and configure your IOs for mimicking, alarms, and sophisticated remote control of other equipment. Transmit Signals Up To 2.5 Miles When it s just too far or too expensive to lay cable for signal communications, turn to Define Instruments Twin Link units. Twin Link uses wireless technology to communicate to and control devices over distances of up to 2.5 miles with Line Of Sight (*requires 12db aerial). Reach can be extended beyond this distance with the addition of a repeater unit. Repeater units can also be used to transmit around RF obstacles when line of sight is obscured. The pre-paired Point to Point units come out of the box ready for 4-20mA I/O applications but additionally can accept a huge variety of input types including ma, RTD and Frequency. Twin Link boasts 2 analogue inputs plus 4 digital I/O switches. Channels are fully isolated and units are industrial strength. Everything You Need Input Node (P2P-I) 2x universal isolated analog input channels accepting Thermocouple, RTD, Process inputs (current & voltage), NPN/PNP open collectors, Potentiometer input, and AC current sensors. Output Node (P2P-O) 2x 4-20mA isolated analog outputs that are easy to scale to your desired range. Flexible IO Each of the Twin Link units also offers 4 digital inputs, 2 digital outputs, and 2 relay outputs, which are simple to program for a range of setpoint functions. P2P-TWIN-LINK REPEATER BRIDGE-KEY Point to point Twin Link Paired Input & Output Wireless Process Signal Transmitters (FCC Approved). Define Instruments Point to Point Repeater Node (FCC Approved). Define Instruments Bridge Key Universal USB Communications Kit. WG-PSU Define Instruments 12VDC Power Adaptor. $21 $517 $204 $85 Please contact FLW Southeast for pricing & availability of other configurations. SENSORS FOR AUTOMATION 18

21 4451 Canton Rd. T: F: