Coalesse Design Options and Specials Pricing Guidelines

Transcription

1 Design Options and Specials Pricing Guidelines Design Options Await 2 Bob Chairs 6 Circa 8 Coupe Grande/Mobile 12 Denizen 13 Enea 14 E-Table2 22 Joel 26 Millbrae 27 Sebastopol 28 Sidewalk 29 SW_1 30 Swathmore 31 Switch 32 Together Bench 34 Host Collection 36 Specials Pricing Guidelines Conference Tables 42 E-Table 2 Conference Tables 50 Host Conference Tables 52 Reunion Collection/Reunion Seminar Conference Tables 54 SW_1 Conference Tables 56 Multi-Purpose/Training Tables 58 Ballet Multipurpose Tables 63 cfor a list of all trademarks, refer to the last page of this speci cation guide Inc. Canadian factor can be found at steelcase.com/cadpricing. Calculate in the following order to avoid rounding errors: Multiply the base price and each option by the Canadian factor. Round each to the nearest dollar. Add base and options for total list price. Coalesse Design Options and Specials Pricing Guidelines

2 Await DESIGN EOOS Tables DESIGN ORIGIN: GERMANY Tip: Await connector tables are not recommended to be used in end-of-run applications. Tip: Await connector tables are not made for ganging to Await mobile ottoman. Freestanding table frame: powder coat Connector table frame: panels are black, white, or gray Top: High-Pressure Laminate top with matching 3 mm edge band Top (tablet): thick anodized aluminum, if selected Ganging plate: 1 4 thick ganging plates attach to the bottom of units to the seating unit plates Style Product ID Change to Number U.S. Base Price 1 Special quote number: CL Style number and Product ID 3 Powder coat color number for freestanding table frame: SLGL Solver Gloss 4142 Platinum Gloss 4 Laminate top and tablets, if selected: 2730 Arctic White 2746 Black 290N North Sea csee Coalesse Speci cation Guides. Tables are available with 1 2 thick anodized aluminum tablet. Freestanding Low Round Table 46-T1 CL $1580 to Laminate Top Price Overall: Dia. 19 H Tables are available with 1 2 thick anodized aluminum tablet Freestanding High Round Table 46-T2 CL $1580 to Laminate Top Price Overall: Dia. 25 H Connector tables available without tablets, but with power. Connector Tables 460-SE22PD CL $ 632 to Power/Data Price Overall: 20"D 4"W "H With Tablet: " Dia. and "H 460-SE30PD CL $ 632 to Power/Data Price cspeci cation Information, continued on next page Overall: 28"D 4"W "H With Tablet: "Dia. and "H 2 Coalesse Design Options and Specials Pricing Guidelines

3 Await DESIGN EOOS Tables DESIGN ORIGIN: GERMANY cspeci cation Information, continued from previous page Style Product ID Change to Number U.S. Base Price Connector tables available without tablets, but with power. Connector Tables 460-SE44PD CL $1264 to Power/Data Price Overall: 42"D 4"W "H With Tablets: "Dia. and "H Coalesse Design Options and Specials Pricing Guidelines 3

4 Await DESIGN EOOS Modular DESIGN ORIGIN: GERMANY Tip: Recommended leathers are Elmosoft Grade C and Elmorustical Grade E. Tip: Special color match, consult customer service. Tip: For Customer's Own Material or Leather, see necessary requirements, important processing instructions, and ordering information csee Coalesse Surface Materials Reference Guide. Tip: Contrasting option available only on sofas. Tip: Please include sketch for ganging. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Frame: unibody construction with nger-jointed plywood Multiple densities of polyurethane foam and polyester foam and polyester ber Sofa: - Seat and back: fabric or leather - Legs: black high-density polyurethane resin - Glides: non-adjustable Ottoman: - Seat: fabric or leather Style Product ID Change to Number U.S. Base Price 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery on seat and back csee Coalesse Speci cation Guides. Sofa available 44" wide CL $400 to Any List Price COM/yds = 5 1 4, COL/sq ft = 116 Overall: 30"D 44"W 27"H Inside: 22"D 44"W 27"H Seat: "H Arm: "H Ottoman available with black resin legs (no casters). 460-H CL $ 65 to Any List Price COM/yds = 1 1 2, COL/sq ft = 33 Overall: 22"D 22"W "H Corner unit available 30 D x 30 W x 27 H _ CL $940 to Any List Price COM/yds = 3 1 2, COL/sq ft = 77 4 Coalesse Design Options and Specials Pricing Guidelines

5 Await DESIGN EOOS Modular DESIGN ORIGIN: GERMANY Coalesse Design Options and Specials Pricing Guidelines 5

6 Bob Chairs DESIGN PEARSON LLOYD by Walter Knoll DESIGN ORIGIN: 2007 GERMANY Base: 8040 aluminum matte polished Upholstery for chair: fabric or leather Glides 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery csee Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price Special to have a xed base that does not swivel. Tip: A hole will be drilled in the base column to allow a bolt to be inserted and tightened down to prevent the base from swiveling. Guest Chair 231 CL $252 COM/yds = 2, COL/sq ft = 44 Overall: "D "W "H Inside: 18"D 18"W "H Seat: "H Arm: "H Special to have a xed base that does not swivel. Lounge Chair 216 CL $391 c, continued on next page 6 Coalesse Design Options and Specials Pricing Guidelines

7 Bob Chairs DESIGN PEARSON LLOYD by Walter Knoll DESIGN ORIGIN: 2007 GERMANY c, continued from previous page Style Product ID Change to Number U.S. Base Price Special to have a swivel return. Lounge Chair, continued 216 CL $600 Special to have a xed base that does not swivel. Lounge Chair with Headrest 221 CL $391 Special to have a swivel return. 221 CL $600 Coalesse Design Options and Specials Pricing Guidelines 7

8 Circa DESIGN ALISON SPEAR, AIA Freestanding Tables DESIGN ORIGIN: UNITED STATES Frame: laminate Top and legs: laminate 1 Special quote number: CL Style number and Product ID 3 Laminate color number for legs and frame csee Coalesse Speci cation Guides. Overall: 42" dia "H Style Product ID Change to Number U.S. Base Price Standard laminate over entire surface. Freestanding Round Table 45-T42RD CL $636 Tip: Optional steel leg has a 90 corner tapered shape. Tip: Please submit sketch for modular applications. 8 Coalesse Design Options and Specials Pricing Guidelines

9 Circa DESIGN ALISON SPEAR, AIA Freestanding Tables DESIGN ORIGIN: UNITED STATES Coalesse Design Options and Specials Pricing Guidelines 9

10 Circa Modular Seating DESIGN ALISON SPEAR, AIA DESIGN ORIGIN: UNITED STATES Tip: These colors are different than other Coalesse powder coats. Tip: Recommended leathers are Elmosoft Grade C and Elmorustical Grade E. Tip: Special color match, consult customer service. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: Pricing based on highest grade textile speci ed. Tip: Contrasting option not available on benches. Tip: Optional steel leg has 90 corner taper shape. Tip: For Customer s Own Material or Leather, see necessary requirements, important processing instructions, and ordering information csee Coalesse Surface Materials Reference Guide. Unit available with upholstered backscreen attached to back with leveling glides. Frame: unibody construction of hardwood plywood utilizing box joinery Upholstery: multiple densities of polyurethane foam xed seat and back with top stitch on seams Legs: hardwood maple or walnut Style Product ID Change to Number U.S. Base Price Straight Seat Chair _ CL $ Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery on seat and back 5 Wood color number for legs csee Coalesse Speci cation Guides. Unit available with locking casters in place of legs. Note: Body will be extended toward oor to maintain standard 17 1 /4 seat height _ CL $ 335 Corner unit available 28 D x 28 W x 29 1 /2 H _ CL $ 408 c, continued on next page 10 Coalesse Design Options and Specials Pricing Guidelines

11 Circa Modular Seating DESIGN ALISON SPEAR, AIA DESIGN ORIGIN: UNITED STATES c, continued from previous page Style Product ID Change to Number U.S. Base Price Unit available with upholstered backscreen attached to back with leveling glides. Straight Loveseat CL $ FI CL $2750 Upholstered backscreen attached to the back of the unit. Special screen will extend up by 22 1 /2" to achieve the 52" overall height. Note: Yardage for the backscreen only is an additional 4 1 /2 yards plain, no repeat, 54"W. 30 outside wedge available. 451-B7460FO CL $ inside wedge available. 451-BF7460FI CL $ 200 Coalesse Design Options and Specials Pricing Guidelines 11

12 Coupe Grande/Mobile DESIGN DENNIE PIMENTAL / JOHN DUFFY DESIGN ORIGIN: UNITED STATES Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: Recommended leathers are Elmosoft Grade C and Elmorustical Grade E. Tip: Special color match, consult customer service. Tip: Pricing based on highest grade textile speci ed. Frame: unibody construction of hardwood plywood utilizing box joinery Legs: solid beech Glides: non-adjustable Upholstery: multiple densities of laminated polyurethane foam and polyester ber on seat and back with top stitch sewing detail On 476M model: - Casters: swivel hard - Locking and non-locking wheels Tablet: - Laminate diameter 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Wood color number for legs 5 Fabric or leather color number for seat and back 6 Laminate color number for 476M tablet, if selected csee Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price Mobile chair is available with powder coat legs and no casters. Mobile Chair 476M CL $0 COM/yds = 5, COL/sq ft = 110 Mobile chair is available with brushed aluminum legs and no casters. 476M CL $0 COM/yds = 5, COL/sq ft = 110 Mobile chair is available with wood legs and no casters. 476M CL $0 COM/yds = 5, COL/sq ft = Coalesse Design Options and Specials Pricing Guidelines

13 Denizen Occasional Table DESIGN WILLIAMS SOREL DESIGN ORIGIN: 2009 UNITED STATES Tip: Ships assembled. Top: Grade 1 laminate top Column with default painted base: paint (see below) Glides: nylon non-marring 1 Special quote number: CL Style number and Product ID 3 Wood nish for top 4 Paint nish for column csee Coalesse Speci cation Guides. Dimensions Style Product ID Change to D W H Number U.S. Base Price Table available in Grade 1 laminate top, black painted underside, and 3 mm at edge. Tablet Table CODT CL $145 Coalesse Design Options and Specials Pricing Guidelines 13

14 Enea Stacker DESIGN JACOB LLUSCA. With Arms DESIGN ORIGIN: SPAIN Overall: D W H Inside: 18 D 18 W H Seat: 18 H Arm: H Tip: Due to the design and construction techniques of the Enea Chair only certain textiles can be successfully applied, therefore all COM fabrics must be submitted to Coalesse for approval prior to order acceptance. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: Contrasting fabric option available on model 3501 only. Tip: CAL 133 for polypropylene is available as a special quote. Polypropylene color will change slightly when FR treatment is applied. Contact Customer Service for availability and pricing. Minimum quantity will apply. Tip: Need sketch for ganging. Frame: constructed of steel tubing Seat and back: molded nylon, wood, or upholstery (wood is laminated layers of hard maple veneer) 1 Special quote number: CL Style number and Product ID 3 Fabric or leather color number for upholstery, if selected 4 Plastic or wood nish color number for seat and back, if selected 5 Base/frame nish: black gloss, white gloss, and silver metallic csee Coalesse Speci cation Guides. Tip: Tablet is 11"D x 9"W. Tip: Arm chairs stack nine high. Arm chair with tablet stacks six high, chairs cannot be stacked with storage rack. Chairs are available with upholstery seat and polypropylene back. Style Product ID Change to Number U.S. Base Price Metal Stacker with Upholstered Seat and Wood Back 3502 CL $70 to Any Grade List Price COM/yds = 3 4, COL/sq ft = Coalesse Design Options and Specials Pricing Guidelines

15 Enea Stacker DESIGN JACOB LLUSCA. With Arms DESIGN ORIGIN: SPAIN Coalesse Design Options and Specials Pricing Guidelines 15

16 Enea Stacker DESIGN JACOB LLUSCA Without Arms DESIGN ORIGIN: SPAIN Tip: CAL 133 for polypropylene is available as a special quote. Polypropylene color will change slightly when FR treatment is applied. Contact Customer Service for availability and pricing. Minimum quantity will apply. Tip: Due to the design and construction techniques of the Enea Chair only certain textiles can be successfully applied, therefore all COM fabrics must be submitted to Coalesse for approval prior to order acceptance. Tip: Armless chairs stack nine high, chairs cannot be stacked with storage rack. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Frame: steel tubing Seat and back: molded nylon, wood, or upholstery (wood is laminated layers of hard maple veneer) 1 Special quote number: CL Style number and Product ID 3 Fabric or leather color number for upholstery, if selected 4 Plastic or wood nish color number for seat and back, if selected 5 Base/frame nish: black gloss, white gloss, and silver metallic csee Coalesse Speci cation Guides. Tip: Contrasting fabric option available on model 3501S only. Tip: No tablet or ganging available on armless models. Chairs are available with 1" thicker seat foam. Style Product ID Change to Number U.S. Base Price Upholstered Seat and Wood Back 35_ CL $15 to Any Grade List Price COM/yds = 1 1 4, COL/sq ft = 28 c, continued on next page Overall: "D 18"W "H Inside: 18"D 18"W "H Seat: 18"H Tip: Product ID can be used to order 3502, 3502S, 3511, 3511S, 3512, and 3512S. 16 Coalesse Design Options and Specials Pricing Guidelines

17 Enea Stacker DESIGN JACOB LLUSCA Without Arms DESIGN ORIGIN: SPAIN c, continued from previous page Style Product ID Change to Number U.S. Base Price Chairs are available with wood back and polypropylene seat. Upholstered Seat and Wood Back, continued 35_ CL $70 to Any Grade List Price COM/yds = 3 4, COL/sq ft = 17 Overall: D 18 W H Inside: 18 D 18 W H Seat: 18 H Tip: Product ID can be used to order 3512 and 3512S. Chairs are available with contrasting standard color and polypropylene seat and back. Polypropylene Seat and Back 35_ CL $60 to Any Grade List Price Overall: "D 18"W "H Inside: 18"D 18"W "H Seat: 18"H Tip: Product ID can be used to order 3503, 3503S, 3513, and 3513S. Coalesse Design Options and Specials Pricing Guidelines 17

18 Enea Barstools DESIGN JACOB LLUSCA DESIGN ORIGIN: SPAIN Tip: CAL 133 for polypropylene is available as a special quote. Polypropylene color will change slightly when FR treatment is applied. Contact Customer Service for availability and pricing. Minimum quantity will apply. Tip: Due to the design and construction techniques of the Enea Barstool only certain textiles can be successfully applied, therefore all COM fabrics must be submitted to Coalesse for approval prior to order acceptance. Tip: Pricing based on highest grade textile speci ed. Constructed of steel tubing with cast aluminum arms Seat and back: polypropylene, wood, or upholstery (wood is laminated layers of hard maple veneer) Footrest with leg stretchers: chrome-plated 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery, if selected 5 Plastic or wood nish color number for seat and back, if selected 6 Base/frame nish: black gloss, white gloss, and silver metallic csee Coalesse Speci cation Guides. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: Contrasting fabric option available on model 3511 only. Barstools are available with 25" overall seat height. Style Product ID Change to Number U.S. Base Price Upholstered Seat and Wood Back 35_ CL $160 to Any Grade List Price COM/yds = 1 1 2, COL/sq ft = 28 Overall: "D "W "H Inside: "D "W "H Seat: "H Arm: "H Barstools are available with " seat height. Polypropylene Seat and Back 3513 CL $160 to Any Grade List Price Overall: "D "W "H Inside: "D "W "H Seat: "H Arm: "H 18 Coalesse Design Options and Specials Pricing Guidelines

19 Enea Barstools DESIGN JACOB LLUSCA DESIGN ORIGIN: SPAIN Coalesse Design Options and Specials Pricing Guidelines 19

20 Enea Tables Single Base DESIGN JOSEP LLUSCA DESIGN ORIGIN: SPAIN Tip: Shipped knocked down. Tip: Disc bases are 24 diameter for 30, 36, and 42 diameter tables. Disc bases are diameter for 54 and 60 diameter tables. Tip: White laminate tops may exhibit slightly visible black specks inherent to the top manufacturing process. Laminate top: 3 4 thick with T-mold edge band Wood top: 3 4 thick with maple edge and maple veneer Base/frame: steel tubing and base: paint Glides: non-skid 1 Special quote number: CL Style number and Product ID 3 Laminate or wood top color number 4 Plastic color for edge band of laminate top, if selected: 6D10 Silver Metallic 6D11 Black 6D12 White 5 Base/frame nish: 4016 White Gloss 4017 Black Gloss 4018 Silver Metallic c See Coalesse Speci cation Guides. Dimensions Style Product ID Change to Diameter H Number U.S. Base Price Occasional Tables are available with 1 2 thick corian Antarctica top. 36" 18" H35-T3618L CL $1759 to Laminate Top Price Tables are available with 30 diameter top. 36" 18" H35-T3618W CL $ 0 to Wood Top Price Table is available 24 diameter in laminate. 24" 18" H35-T3618L CL $ 0 c, continued on next page 20 Coalesse Design Options and Specials Pricing Guidelines

21 Enea Tables Single Base DESIGN JOSEP LLUSCA DESIGN ORIGIN: SPAIN c, continued from previous page Dimensions Style Product ID Change to Diameter H Number U.S. Base Price Tables are available with 26 height. Conference 30" 30" H35-T3030L CL $174 to Laminate Top Price Tables are available with holes drilled for oor mount. Café/Counter Height 24" 36" H35-T2436L CL $150 to Laminate Top Price Coalesse Design Options and Specials Pricing Guidelines 21

22 E-Table 2 72"L, 84"L, 96"L, 10'L, and 12'L Racetrack, Faceted, Rectangular, Soft Radiused End, and Trapezoid Tables with Two Aluminum Bases Only DESIGN JEFF CRONK E-Table to be standing height at 42 overall height with two aluminum bases. Top: particle board core with laminate Edge: self-edge laminate, 3 mm at plastic edge, or convex vinyl Two bases: cast and extruded aluminum with powder coat Wireway: black steel C-channels and side panels and black plastic access door Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Powder coat color number for bases 4 Laminate color number for top 5 Edge selection: - Self-edge laminate to match top - 3 mm at plastic edge color number, if selected - Convex vinyl edge, if selected: 6000 Black 6607 Woodrose 6609 Smoke 6655 Warm White c See Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price E2 A CL $ Coalesse Design Options and Specials Pricing Guidelines

23 E-Table 2 14', 16', 18', and 20' L Racetrack, Faceted, Rectangular, Soft Radiused End, and Trapezoid Tables with Three Aluminum Bases Only DESIGN JEFF CRONK E-Table to be standing height at 42 overall height with three aluminum bases. Top: particle board core with laminate Edge: self-edge laminate, 3 mm at plastic edge, or convex vinyl Three bases: cast and extruded aluminum with powder coat Wireway: black steel C-channels and side panels and black plastic access door Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Powder coat color number for bases 4 Laminate color number for top 5 Edge selection: - Self-edge laminate to match top - 3 mm at plastic edge color number, if selected - Convex vinyl edge, if selected: 6000 Black 6607 Woodrose 6609 Smoke 6655 Warm White c See Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price E2 A CL $1410 Coalesse Design Options and Specials Pricing Guidelines 23

24 E-Table 2 22 and 24 Racetrack, Faceted, Rectangular, Soft Radiused End, and Trapezoid Tables with Four Aluminum Bases Only DESIGN JEFF CRONK E-Table to be standing height at 42 overall height with four aluminum bases. Top: particle board core with laminate Edge: self-edge laminate, 3 mm at plastic edge, or convex vinyl Four bases: cast and extruded aluminum with powder coat Wireway: black steel C-channels and side panels and black plastic access door Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Powder coat color number for bases 4 Laminate color number for top 5 Edge selection: - Self-edge laminate to match top - 3 mm at plastic edge color number, if selected - Convex vinyl edge, if selected: 6000 Black 6607 Woodrose 6609 Smoke 6655 Warm White c See Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price E2 A CL $ Coalesse Design Options and Specials Pricing Guidelines

25 E-Table 2 DESIGN JEFF CRONK 96 L, 10 L, and 12 L Racetrack, Faceted, Rectangular, and Soft Radiused End Tables E-Table is available in 10 L x 42 W x 29 H. Top: particle board core with laminate Edge: self-edge laminate, 3 mm at plastic edge, or convex vinyl Two bases: black laminate on MDF core Wireway: black steel C-channels and side panels and black plastic access door Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Laminate color number for top 4 Edge selection: - Self-edge laminate to match top - 3 mm at plastic edge color number, if selected - Convex vinyl edge, if selected: 6000 Black 6607 Woodrose 6609 Smoke 6655 Warm White c See Coalesse Speci cation Guides. Dimensions Style Product ID Change to D W H Number U.S. Base Price Rectangular Tables with Two Bases E2R1048_ CL $0 Coalesse Design Options and Specials Pricing Guidelines 25

26 Joel Lounge by Walter Knoll DESIGN EOOS DESIGN ORIGIN: 2004 GERMANY Base frame: steel with molded rigid foam Seat frame: plywood with molded foam Base: Chrome plated Auto swivel return mechanism 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery c See Coalesse Speci cation Guides. Overall: 29 D W H Seat: H Arm: H Inside: D x W x 11 H Joel lounge is available with a xed (non-swivel) base. Style Product ID Change to Number U.S. Base Price COWK100_ CL $ Coalesse Design Options and Specials Pricing Guidelines

27 Millbrae Lounge DESIGN COALESSE DESIGN STUDIO DESIGN ORIGIN: USA Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: For Customer s Own Material or Leather, see necessary requirements, important processing instructions, and ordering information. csee Coalesse Surface Materials Reference Guide. Frame: constructed with nger jointed plywood Cold roll steel 1 2 x bent legs Multiple densities of polyurethane foams and polyester ber on seat and back: fabric or leather The lifestyle collection has tufted pattern accents and separate back cushions with double needle top stitch: fabric or leather The contract collection has quilted pattern accents with double needle top stitch: fabric or leather Leg nishes: black gloss Ganging kit with attachment hardware, if selected 1 Special quote number: CL Style number and Product ID 3 Fabric or leather color number for seat, back, and arms csee Coalesse Speci cation Guides. Tip: Attachment straps are standard on back pillow of lifestyle chairs. Corner unit available 30 D x 30 W x 31 H. Style Product ID Change to Number U.S. Base Price Contract Lounge Chair COMFL_ CL $1560 Axil 2 unit with two power and two active 2-port USB simple charger with 10 cord available. Plug is integrated into frame, offset to left side facing user. Contract Lounge Chair without Arms COMFL1_ CL $ 780 Coalesse Design Options and Specials Pricing Guidelines 27

28 Sebastopol Tables DESIGN EMILIA BORGTHORSDOTTIR DESIGN ORIGIN: UNITED STATES Exterior surface: veneer grade 1, oak, or walnut Interior surface: glossy laminate Glides: concealed adjustable glide with non-marking nylon pad 1 Special quote number: CL Style number and Product ID 3 Exterior surface wood nish number 4 Interior surface glossy laminate: 2001 Smoky White 2002 Studio Gray 2003 Wrought Iron 2004 Black Pearl 2005 Liberty Red c See Coalesse Speci cation Guides. Table with 2" high plinth base and leveling glides to accomodate table placement over oor core, allowing room for Power Pod. Dimensions Style Product ID Change to D W H Number U.S. Base Price 16" High Tables 23" 27" 16" COEB2723L CL $490 18" 41" 16" COEB4118L CL $905 22" High Tables 23" 27" 22" COEB2723H CL $490 18" 41" 22" COEB4118H CL $ Coalesse Design Options and Specials Pricing Guidelines

29 Sidewalk DESIGN STUDIO B Lounge/Mobile DESIGN ORIGIN: UNITED STATES Overall: 27"D "W 29"H Inside: 19"D 26"W 17"H Seat: "H Arm: "H Frame: unibody construction with nger jointed plywood Upholstery: multiple densities of polyurethane foam and polyester ber on seat, back, and arms. Lounge: - Legs: silver powder coat steel legs with "Go" glide Mobile: " diameter tablet: laminate - Legs: Silver powder coat steel legs with casters - Casters: four non-locking 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery on seat, back, and arms csee Coalesse Speci cation Guides. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: Recommended leathers are Elmosoft Grade C and Elmorustical Grade E. Tip: Special color match, consult Customer Service. Tip: Specify tablet from facing position. Tip: Cup holder attaches to tablet. Tip: Extra pivoter allows tablet to be moved side to side. Tip: Tablet can be installed on mobile models only. Sidewalk is available with xed, non-removable tablet (still swivels). Style Product ID Change to Number U.S. Base Price Mobile Lowback Chair with Tablet 444M_ CL $715 to Any Grade List Price COM/yds = 4, COL/sq ft = 88 Coalesse Design Options and Specials Pricing Guidelines 29

30 SW_1 Collaborative Lounge Seating DESIGN SCOTT WILSON & MINIMAL DESIGN ORIGIN: UNITED STATES Seat: fabric or leather Back: knit Base: 8040 Aluminum Matte Polished Frame: steel tube Glides: aluminum with non marring plastic insert Swivel return mechanism 1 Special quote number: CL Style number and Product ID 3 Fabric or leather color number for seat 4 Knit color number for back: 5KG0 Stone 5KG1 Grey 5KG2 Brown 5KG3 Black 5KG4 Ivory 5KG5 Coal 5KG6 Garnet 5KG7 Golden 5KG8 Royal csee Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price Chairs are available with 5-star base and hard casters. Low Back Collaborative Lounge Chair COW613_ CL $1535 Pillow COM/yds = 1 1 4, COL/sq ft = Chairs are available with 5-star base and hard casters. High Back Collaborative Lounge Chair COW713_ CL $1535 Pillow COM/yds = 1 1 4, COL/sq ft = Coalesse Design Options and Specials Pricing Guidelines

31 Swathmore DESIGN MICHAEL SHIELDS Wood Leg DESIGN ORIGIN: UNITED STATES Overall: "D 27"W "H Inside: 19"D 20"W 14"H Seat: 17"H Arm: 25"H Frame: unibody construction with nger jointed plywood. Upholstery: multiple densities of polyurethane foam and polyester ber on seat, back, and arm cushions Legs: solid maple Glides: dia. non-adjustable metal 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery on seat, back, and arms 5 Wood color number for legs csee Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price Swathmore is available with 19" seat height. Tip: Fabrics and leathers will appear loose with comfort wrinkles when upholstered. Tip: All cushions are attached. Tip: Recommended leathers are Elmosoft Grade C and Elmorustical Grade E. Lounge Chair with Wood Legs 240_ CL $253 COM/yds = 4, COL/sq ft = 88 Tip: Special color match, consult Customer Service. Coalesse Design Options and Specials Pricing Guidelines 31

32 Switch DESIGN EOOS DESIGN ORIGIN: GERMANY Base: satin silver plated tubing Trivalent satin chrome nish Glass top: 5 8" thick, green tinted glass tops have radiused corners Adjustable glides 1 Special quote number: CL Style number and Product ID csee Coalesse Speci cation Guides. Tip: Interport power/data module is not available on Switch. Tables are available with 3 4" thick maple wood top. Dimensions Style Product ID Change to D W H Number U.S. Base Price Square Table CL $ Coalesse Design Options and Specials Pricing Guidelines

33 Switch DESIGN EOOS DESIGN ORIGIN: GERMANY Coalesse Design Options and Specials Pricing Guidelines 33

34 Together Bench DESIGN EOOS DESIGN ORIGIN: 2004 GERMANY by Walter Knoll Upholstery for chair: fabric or leather Glides 1 Special quote number: CL Style number and Product ID 3 Number of fabrics if contrasting fabric style number is selected 4 Fabric or leather color number for upholstery csee Coalesse Speci cation Guides. Style Product ID Change to Number U.S. Base Price Left-side facing ganging unit, no offset right-side facing, shared gang leg right-side facing. Straight with Back, 1 1 2" Offset COTO69WB15_ CL $660 Overall: "D "W 31"H Seat: 19"D "H Right-side facing ganging unit, no offset left-side facing, shared gang leg left-side facing. COTO69WB15_ CL $660 Overall: "D "W 31"H Seat: 19"D "H Left-side facing ganging unit, no offset right-side facing, shared gang leg right-side facing. COTO69WB15_ CL $660 Overall: "D "W 31"H Seat: 19"D "H Right-side facing ganging unit, no offset left-side facing, shared gang leg left-side facing. COTO69WB15_ CL $660 Overall: "D "W 31"H Seat: 19"D "H 34 Coalesse Design Options and Specials Pricing Guidelines

35 Together Bench DESIGN EOOS DESIGN ORIGIN: 2004 GERMANY by Walter Knoll Coalesse Design Options and Specials Pricing Guidelines 35

36 Host Collection DESIGN F/P DESIGN AND VECTA DESIGN TEAM Round Tables Tip: Shipped knocked down and top ships in one piece. Tip: The wood edge on a table top with woodgrain laminate may not match the top. Tip: You must send a sample of reasonable size for Stain-to- Match. TAP Location C L Top: 1 1 4" particle board core with laminate Flat wood edge TAP, if selected: 10"W x 12"L opening(s) trimmed with a at solid wood pro le and with brushed anodized aluminum doors Base: - Wood veneer - Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Wood color number for base 4 Laminate color number for table top, if selected 5 Wood color number for wood edge 6 Door color number for storage tray or TAP doors, if selected Black Silver csee Coalesse Speci cation Guides. Tip: Tables available with zero or one TAP. Tip: In addition to the data and audio/video AAPs available from Coalesse, other styles of AAPs are available through Extron Electronics. For an Extron dealer, call Tip: See TAP options for electrical systems and faceplate list. Tip: Wood veneer doors for storage tray or TAP will always be cross grain. Tip: Veneer doors not recommended for wedge lay-up veneer tables. Tip: Connectrac must be the same wiring schematic as the table. Tip: Last digit of style number indicates number of TAP(s). Tables are available predrilled for miniport - center. Style Product ID Change to Number U.S. Base Price 48 W Diameter One Piece Top 0 TAP HS4800D10 CL $75 Tables are available 42" diameter with limited kneespace. 1 TAP HS4800D11 CL $ 0 Veneer direction 36 Coalesse Design Options and Specials Pricing Guidelines

37 Host Collection DESIGN F/P DESIGN AND VECTA DESIGN TEAM Round Tables Coalesse Design Options and Specials Pricing Guidelines 37

38 Host Collection DESIGN F/P DESIGN AND VECTA DESIGN TEAM Rectangular Tables with Three Bases Tip: Shipped knocked down and top ships in one piece. Tip: Grain direction for woodgrain laminate runs the length of the table. Tip: Clips are provided with table: One clip per foot of table length. Tip: The wood edge on a table top with woodgrain laminate may not match the top. Tip: You must send a sample of reasonable size for Stain-to- Match. Tip: 14'L and 16'L tables available with zero, one, two, or four TAP(s). 18'L and 20'L tables available with zero, one, two, four, or six TAP(s). Tip: In addition to the data and audio/video AAPs available from Coalesse, other styles of AAPs are available through Extron Electronics. For an Extron dealer, call Tip: See TAP options for electrical systems and faceplate list. Tip: For single TAP style numbers, the modular system tray is not available. Specify the hardwired tray option. Tip: If the speci ed table has multiple TAP(s), any one TAP can be replaced with a storage tray. Tip: Wood veneer doors for storage tray and TAP will always be cross grain. Tip: Connectrac must be the same wiring schematic as the table. Top: 1 1 4" particle board core with laminate Flat wood edge TAP(s), if selected: 10"W x 12"L opening(s) trimmed with a at solid wood pro le and with brushed anodized aluminum TAP doors Tech corridor: four aluminum beams for top support provide tracks for hinged aluminum doors that clip shut: satin anodized nish Universal clip: black plastic Three 27"W bases: wood veneer on MDF with aluminum universal bracket Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Base selection (see below) and wood color number for base 4 Laminate color number for table top, if selected 5 Wood color number for wood edge 6 Door color number for storage tray or TAP door, if selected: Black Silver csee Coalesse Speci cation Guides. Veneer direction 38 Coalesse Design Options and Specials Pricing Guidelines

39 Host Collection DESIGN F/P DESIGN AND VECTA DESIGN TEAM Rectangular Tables with Three Bases Style Product ID Change to Number U.S. Base Price Tables are available 216" x 42". 18'L x 48"W Three Piece Top 4 TAP HS1848R34 CL $0 Tip: Prices shown include top, TAP(s), and slim bases. Tip: Last digit of style number indicates number of TAP(s). Tip: For tech corridor, 18'L tables have eight long doors and four short doors. Coalesse Design Options and Specials Pricing Guidelines 39

40 Host Collection DESIGN F/P DESIGN AND VECTA DESIGN TEAM Trapezoid Tables with Two Bases Tip: Shipped knocked down. Tip: Grain direction for woodgrain laminate runs the length of the table. Tip: See TAP options for electrical systems and faceplate list. Tip: Clips are provided with table: One clip per foot of table length. Tip: The wood edge on a table top with woodgrain laminate may not match the top. Top: 1 1 4" particle board core with laminate Flat wood edge TAP(s), if selected: 10"W x 12"L opening(s) trimmed with a at solid wood pro le and with brushed anodized aluminum TAP doors Tech corridor: two aluminum beams for top support provide tracks for hinged aluminum doors that clip shut: satin anodized nish Universal clip: black plastic Two 27"W bases: wood veneer on MDF with aluminum universal bracket Concealed leveling glides: non-marring, black plastic 1 Special quote number: CL Style number and Product ID 3 Base selection (see below) and wood color number for base 4 Laminate color number for table top, if selected 5 Wood color number for wood edge 6 Door color number for storage tray or TAP door, if selected: Black Silver csee Coalesse Speci cation Guides. Tip: You must send a sample of reasonable size for Stain-to- Match. Tip: 96"L tables available with zero, one, or two TAP(s). 10'L and 12'L tables available with zero, one, two, or three TAP(s). Tip: In addition to the data and audio/video AAPs available from Coalesse, other styles of AAPs are available through Extron Electronics. For an Extron dealer, call Tip: See TAP options for electrical systems and faceplate list. Tip: For single TAP style numbers, the modular system tray is not available. Specify the hardwired tray option. Tip: If the speci ed table has multiple TAP(s), any one TAP can be replaced with a storage tray. Tip: Wood veneer doors for storage tray or TAP will always be cross grain. Tip: Connectrac must be the same wiring schematic as the table. Veneer direction Tip: Prices shown include top, TAP(s), and slim bases. Tip: Last digit of style number indicates number of TAP(s). Tip: For tech corridor, 10'L tables have four long doors and four short doors. 40 Coalesse Design Options and Specials Pricing Guidelines

41 Host Collection DESIGN F/P DESIGN AND VECTA DESIGN TEAM Trapezoid Tables with Two Bases Style Product ID Change to Number U.S. Base Price Tables are available 108" x 60" x 42". 10 L x 42 W x 60 W One Piece Top 2 TAPS HS1060T12 CL $0 Coalesse Design Options and Specials Pricing Guidelines 41

42 Conference Tables Desktop Power, Plug-in Tip: All desktop units are con- gured from left to right with the power receptacles starting at the left. USB charging will always be con gured next to the power. Tip: Any desktop units speci ed with four or more power receptacles will require a circuit breaker on the plug. Tip: Not all desktop units will work with all table sizes and con gurations. There may be interference issues with modesty panels and mechanisms. Tip: Up to 13 duplex receptacles can be used on a single circuit. The modular power kit counts as one and a 2 power desktop unit would also count as one. Therefore, a table with a modular power kit and one desktop unit with four single receptacles would count as a total of three against the total of 13. Tip: For the desktop units to work with the modular power table kits, you must specify these as plug-in units, with your choice of a short cord or a six foot cord. Glenbeigh Contemporary corded desktop: includes voice/data adaptor kit, one touch pop-up Ellora corded desktop: voice data adapter kit, lift-up lid, water-proof simplexes, anodized aluminum nish, Mho corded desktop: voice data adapter kit, one touch pop-up, anodized aluminum nish Axil Z corded desktop: voice data adapter kit, lift-up lid, water-proof simplexes, black or white nish Ohm corded desktop: voice/data adapter kit, one touch pop-up, anodized aluminum with black nish, MS2 corded desktop: includes voice/data adapter kit, one touch pop-up, anodized aluminum nish, one power cord for each section, many power/voice/data options M2X corded desktop: voice data adapter kit, one touch pop-up, anodized aluminum nish, one power cord for each section E2X corded desktop: voice data adapter kit, one touch pop-up, anodized aluminum nish, one power cord for each section Related Products Related E-table2 cpage 50 Products Host cpage 36 Reunion cpage 54 SW_1 cpage 56 1 Special quote number: INFORMATION ONLY CONTACT SPECIALSORDERS@ COALESSE.COM FOR QUOTE 2 Style number Power/Data Style Change to Hole Cut-outs Con guration USB in Place Number U.S. Base Price Required of Data (W x L) (each) Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and or data is required. These will require special size cut-outs. Desktop Power Plug Glenbeigh Contemporary 2 ports $ " x 5" 1 power, 1 data N.A. $131 2 power N.A. Finishes: Satin Nickel Plated, Antique Brass Plated, Dark Bronze Plated, Metallic Silver Powder Coat, Midnight Black Powder Coat, Parchment White Powder Coat c, continued on next page 42 Coalesse Design Options and Specials Pricing Guidelines

43 Conference Tables Desktop Power, Plug-in Tip: For the desktop units to work with the modular power table kits, you must specify these as plug-in units, with your choice of a short cord versus a 6' cord. Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and/ or data is required. These will require special size cut-outs. Tip: Extron AAPs are compatible with the Ellora desktop. Two single AAPs will take up three data or power openings, i.e. if two power are required with Extron AAPs, then it would require a ve port Ellora unit. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and/ or data is required. These will require special size cut-outs. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. c, continued from previous page Power/Data Style Change to Hole Cut-outs Configuration USB in Place Number U.S. Base Price Required of Data (W x L) (each) Desktop Power Plug, continued Ellora 4 ports $ 11 5" x 8" 1 power, 3 data +$95 $ 6 2 power, 2 data +$95 $ 1 3 power, 1 data +$95 $ 64 4 power N.A. 6 ports $ 4 5" x 11" 1 power, 5 data N.A. +$ 9 2 power, 4 data +$95 +$ 14 3 power, 3 data +$95 +$ 69 4 power, 2 data +$95 +$ 89 5 power, 1 data +$95 +$ 99 6 power N.A. 8 ports $ 94 5" x 14" 1 power, 7 data N.A. +$159 2 power, 6 data N.A. +$164 3 power, 5 data N.A. +$229 4 power, 4 data +$95 +$284 5 power, 3 data +$95 +$289 6 power, 2 data +$95 +$309 7 power, 1 data +$95 +$319 8 power N.A. Finish: Anodized Aluminum Mho 2 ports $ 66 4" x 5" 1 power, 1 data +$95 $ 56 2 power N.A. 3 ports $ 56 4" x 6.5" 1 power, 2 data +$95 $ 51 2 power, 1 data +$95 $ 46 3 power N.A. 4 ports $ 61 4" x 8" 1 power, 3 data +$95 $ 51 2 power, 2 data +$95 $ 46 3 power, 1 data +$95 +$ 19 4 power N.A. 5 ports $ 56 4" x 9.5" 1 power, 4 data +$95 $ 26 2 power, 3 data +$95 $ 36 3 power, 2data +$95 +$ 29 4 power, 1 data N.A. +$ 39 5 power N.A. c, continued on next page Coalesse Design Options and Specials Pricing Guidelines cdesktop Power, Plug-in, continued 43

44 Conference Tables Desktop Power, Plug-in continued c, continued from previous page Power/Data Style Change to Hole Cut-outs Configuration USB in Place Number U.S. Base Price Required of Data (W x L) (each) Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and/ or data is required. These will require special size cut-outs. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. Desktop Power Plug, continued Mho, continued 6 ports $ 31 4" x 11" 1 power, 5 data N.A. $ 21 2 power, 4 data +$95 $ 26 3 power, 3 data +$95 +$ 34 4 power, 2 data +$95 +$ 29 5 power, 1 data +$95 +$ 74 6 power N.A. 7 ports $ 9 4" x 12.5" 1 power, 6 data N.A. +$ 14 2 power, 5 data N.A. +$ 13 3 power, 4 data +$95 +$ 44 4 power, 3 data +$95 +$ 59 5 power, 2 data +$95 +$104 6 power, 1 data +$95 +$ 99 7 power N.A. 8 ports $ 9 4" x 12.5" 1 power, 7 data N.A. +$ 14 2 power, 6 data N.A. +$ 13 3 power, 5 data +$95 +$ 44 4 power, 4 data +$95 +$ 59 5 power, 3 data +$95 +$104 6 power, 2 data +$95 +$ 99 7 power, 1 data N.A. +$ 99 8 power N.A. Finish: Anodized Aluminum only c, continued on next page 44 Coalesse Design Options and Specials Pricing Guidelines

45 Conference Tables Desktop Power, Plug-in Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and/ or data is required. These will require special size cut-outs. Tip: Extron AAPs are compatible with the Axil Z desktop. Two single AAPs will take up three data or power openings, i.e. if two power are required with Extron AAPs, then it would require a ve port Ellora unit. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. c, continued from previous page Power/Data Style Change to Hole Cut-outs Configuration USB in Place Number U.S. Base Price Required of Data (W x L) (each) Desktop Power Plug, continued Axil Z 3 ports " x 5.25" 1 power, 2 data 2 power, 1 data $111 3 power N.A. 4 ports " x 6.75" 1 power, 3 data $116 2 power, 2 data +$95 3 power, 1 data $ 51 4 power N.A. 5 ports " x 8.25" 1 power, 4 data $111 2 power, 3 data +$95 $116 3 power, 2 data +$95 4 power, 1 data $ 36 5 power N.A. 6 ports " x 9.75" 1 power, 5 data $ 76 2 power, 4 data +$95 $ 46 3 power, 3 data +$95 +$ 9 4 power, 2 data +$95 5 power, 1 data +$ 29 6 power N.A. 7 ports " x 11.25" 1 power, 6 data $ 66 2 power, 5 data +$95 $ 51 3 power, 4 data +$95 $ 6 4 power, 3 data +$95 +$ 19 5 power, 2 data 6 power, 1 data N.A. +$ 34 7 power N.A. 8 ports " x 12.75" 1 power, 7 data +$ 9 2 power, 6 data N.A. $ 1 3 power, 5 data N.A. +$ 24 4 power, 4 data +$95 +$ 64 5 power, 3 data +$95 +$ 69 6 power, 2 data +$95 7 power, 1 data +$ 64 8 power N.A. Finish: Gloss White or Gloss Black c, continued on next page Coalesse Design Options and Specials Pricing Guidelines cdesktop Power, Plug-in, continued 45

46 Conference Tables Desktop Power, Plug-in continued c, continued from previous page Power/Data Style Change to Hole Cut-outs Configuration USB in Place Number U.S. Base Price Required of Data (W x L) (each) Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and/ or data is required. These will require special size cut-outs. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. Desktop Power Plug, continued Ohm 2 ports $ 41 4" x 5" 1 power, 1 data +$95 $ 31 2 power N.A. 3 ports $ 31 4" x 6.5" 1 power, 2 data +$95 $ 26 2 power, 1 data +$95 $ 21 3 power, N.A. 4 ports $ 31 4" x 8" 1 power, 3 data +$95 $ 26 2 power, 2 data +$95 $ 21 3 power, 1 data +$95 +$ 54 4 power, N.A. 5 ports $ 26 4" x 9.5" 1 power, 4 data +$95 +$ 4 2 power, 3 data +$95 $ 6 3 power, 2 data +$95 4 power, 1 data 5 power 6 ports $ 1 4" x 11" 1 power, 5 data +$95 +$ 9 2 power, 4 data +$95 +$ 4 3 power, 3 data +$95 $ 69 4 power, 2 data +$95 5 power, 1 data +$114 6 power N.A. 7 ports " x 12.5" 1 power, 6 data +$ 19 2 power, 5 data +$95 +$ 39 3 power, 4 data +$95 4 power, 3 data 5 power, 2 data 6 power, 1 data 7 power 8 ports " x 14" 1 power, 7 data +$154 2 power, 6 data +$95 3 power, 5 data +$ 99 4 power, 4 data +$95 5 power, 3 data 6 power, 2 data 7 power, 1 data 8 power Finish: Anodized Aluminum only with Black trim c, continued on next page 46 Coalesse Design Options and Specials Pricing Guidelines

47 Conference Tables Desktop Power, Plug-in c, continued from previous page Power/Data Style Change to Hole Cut-outs Configuration USB in Place Number U.S. Base Price Required of Data (W x L) (each) Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and or data is required. These will require special size cut-outs. Tip: Extron AAPs are compatible with the Axil Z desktop. Two single AAPs will take up three data or power openings, i.e. if two power are required with Extron AAPs, then it would require a ve port Ellora unit. Tip: Each port side will have a plug, so there will always be two plugs. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. Plug-in desktop power units that can be offered as an alternative to the Mini-Ports and Interports when more or less power and/ or data is required. These will require special size cut-outs. Tip: Each port side will have a plug, so there will always be two plugs. Tip: USB for charging is con- gured in the spot of one data port. Each USB speci ed is an additional $95 US list. Desktop Power Plug, continued MS2 2 ports per side CODPE4 +$344 4" x 10.19" 1 power, 1 data +$95 +$349 2 power N.A. 4 ports per side CODPE4 +$384 4" x 16.19" 1 power, 3 data +$95 +$404 2 power, 2 data +$95 +$434 3 power, 1 data +$95 +$569 4 power, N.A. 6 ports per side CODPE4 +$444 4" x 22.19" 1 power, 5 data N.A. +$479 2 power, 4 data +$95 +$484 3 power, 3 data +$95 +$604 4 power, 2 data +$95 +$624 5 power, 1 data +$95 +$644 6 power N.A. 8 ports per side CODPE4 +$494 4" x 28.19" 1 power, 7 data N.A. +$514 2 power, 6 data N.A. +$534 3 power, 5 data +$95 +$654 4 power, 4 data +$95 +$674 5 power, 3 data +$95 +$694 6 power, 2 data +$95 +$714 7 power, 1 data +$95 +$734 8 power N.A. Finish: Anodized Aluminum only M2X 2 ports per side CODPE4 +$ " x 5" 1 power, 1 data +$95 +$204 2 power N.A. 3 ports per side CODPE4 +$ " x 6.5" 1 power, 2 data +$95 +$214 2 power, 1 data +$95 +$204 3 power, N.A. 4 ports per side CODPE4 +$ " x 8" 1 power, 3 data +$95 +$219 2 power, 2 data +$95 +$234 3 power, 1 data +$95 +$314 4 power, N.A. c, continued on next page Coalesse Design Options and Specials Pricing Guidelines cdesktop Power, Plug-in, continued 47