HB Communications Cabling Manual Module 1: Australian regulatory arrangements

Size: px
Start display at page:

Download "HB Communications Cabling Manual Module 1: Australian regulatory arrangements"

Transcription

1 HB Communications Cabling Manual Module 1: Australian regulatory arrangements HB

2 HB Handbook Communications Cabling Manual Module 1: Australian regulatory arrangements Originated as HB Second edition COPYRIGHT Standards Australia All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher. Published by Standards Australia GPO Box 476, Sydney, NSW 2001, Australia ISBN

3 HB Preface This Handbook was written by the Australian Communications and Media Authority (ACMA) in consultation with Standards Australia and its Communications Cabling Committee CT-001. This Handbook forms part of a series known collectively as the Communications Cabling Manual (CCM). The CCM is compiled by Standards Australia in consultation with an industry-based advisory panel representing carriers, ACMA, Communications Alliance, cable manufacturers, cablers and end-users. Standards Australia wishes to acknowledge the advisory panel s valuable contribution. The CCM is designed to provide essential information to the communications cabling industry and is available in the following modules: Module 1: Australian regulatory arrangements (HB 243) Module 2: Communications cabling handbook (HB 29) Module 3: Residential communications cabling handbook (HB 252) Module 4: Relevant standards Regulatory standards AS/ACIF S008:2006 Requirements for customer cabling products AS/ACIF S009:2006 Installation requirements for customer cabling (Wiring Rules) Voluntary standards (AS/NZS 308X series, and AS/NZS ISO/IEC series) This Module of the CCM provides essential regulatory information to industry in order to assist cabling installers and others to comply with the requirements of the Telecommunications Act 1997 (the Act). In particular, it gives advice on Cabling Provider Rules (CPRs) which came into effect on 3 October Whilst the information in this Handbook is the latest available at the time of printing, users must ensure that they consult the latest edition of any referenced standard, amendments to the Act and its regulations and use the references herein as a guide only. To receive notification of any new or updated documentation concerning communications cabling, register with Standards Watch at

4 3 HB Contents Abbreviations and definitions...5 Overview Registration Cabling provider rules Overview What types of cabling registration are covered by CPRs? What are the requirements for registration? Who are the registrars and how do I register? What industry sectors are covered by the CPRs? Do cablers have to maintain records of cabling work? (TCA form) Does the supervision rule still apply? What happens if a cabler does not comply with CPRs? What happens if my cabling registration has expired? What happens if I change my postal address? Network boundary The network boundary Jumperable main distribution frames Non-jumperable main distribution frames Network boundary sockets Regulations Standards AS/ACIF S008 and AS/ACIF S Labelling cabling product (including cable) and customer equipment What is the Labelling Notice? The A-Tick compliance label Alternative compliance scheme Regulations prior to July Line links between distinct places Supply to the public Network units Distinct place Immediate circle Approvals Use of existing infrastructure Who can install line links? Examples of line link installations Pre-existing cabling Compliance requirements for pre-existing cabling Compliance... 34

5 HB ACMA inspections and audits How can I obtain a cabling registration? Training for a Registered Cabler How is my cabling experience assessed? Where can I get information on training? Where can I get my overseas qualifications assessed? Industry contacts Australian Communications and Media Authority (ACMA) Standards Australia Registrars National Industry Training Advisory Bodies Other industry contacts Forms... 43

6 The remainder of this document is available for purchase online at SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.

This is a free 10 page sample. Access the full version online.

This is a free 10 page sample. Access the full version online. Module 1 Australian regulatory arrangements COPYRIGHT Standards Australia/Standards New Zealand All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic

More information

TELECOMMUNICATIONS AND DATA CABLING BUSINESSES

TELECOMMUNICATIONS AND DATA CABLING BUSINESSES DRAFT for RCWS, ADTIA & ICAA INDUSTRY CODE for TELECOMMUNICATIONS AND DATA CABLING BUSINESSES Registered by the ACMA on XX XXXXX 2016 TABLE OF CONTENTS TABLE OF CONTENTS 2 1. SCOPE AND OBJECTIVES 3 1.1

More information

Australian Standard. Records Management. Part 1: General AS ISO ISO

Australian Standard. Records Management. Part 1: General AS ISO ISO AS ISO 15489.1 2002 ISO 15489-1 AS ISO 15489.1 Australian Standard Records Management Part 1: General [ISO title: Information and documentation Records management Part 1: General] This Australian Standard

More information

Australian Standard. General requirements for the competence of testing and calibration laboratories AS ISO/IEC ISO/IEC 17025:1999

Australian Standard. General requirements for the competence of testing and calibration laboratories AS ISO/IEC ISO/IEC 17025:1999 AS ISO/IEC 17025 1999 ISO/IEC 17025:1999 AS ISO/IEC 17025 Australian Standard General requirements for the competence of testing and calibration laboratories This is a free 7 page sample. Access the full

More information

Australian Standard. Records Management. Part 2: Guidelines AS ISO ISO TR

Australian Standard. Records Management. Part 2: Guidelines AS ISO ISO TR AS ISO 15489.2 2002 ISO TR 15489-2 AS ISO 15489.2 Australian Standard Records Management Part 2: Guidelines [ISO title: Information and documentation Records management Part 2: Guidelines] This Australian

More information

Guide 28 General rules for a model third-party certification system for products

Guide 28 General rules for a model third-party certification system for products SAA HB18.28 1991 SANZ HB18.28 1991 ISO/IEC Guide 28 1982 Guidelines for third-party certification and accreditation Guide 28 General rules for a model third-party certification system for products STANDARDS

More information

AS/NZS ISO/IEC 17067:2015

AS/NZS ISO/IEC 17067:2015 Australian/New Zealand Standard AS/NZS ISO/IEC 17067:2015 (ISO/IEC 17067:2013, IDT) Conformity assessment Fundamentals of product certification and guidelines for product certification schemes AS/NZS ISO/IEC

More information

Australian Standard. Industrial automation systems and integration Open systems application integration framework

Australian Standard. Industrial automation systems and integration Open systems application integration framework AS ISO 15745.2 2004 ISO 15745-2:2003 AS ISO 15745.2 Australian Standard Industrial automation systems and integration Open systems application integration framework Part 2: Reference description for ISO

More information

Do you want to be a registered cabler? A guide for prospective telecommunications cablers JANUARY 2015

Do you want to be a registered cabler? A guide for prospective telecommunications cablers JANUARY 2015 Do you want to be a registered cabler? A guide for prospective telecommunications cablers JANUARY 2015 Canberra Red Building Benjamin Offices Chan Street Belconnen ACT PO Box 78 Belconnen ACT 2616 T +61

More information

Australian Standard. Industrial automation systems and integration Open systems application integration framework

Australian Standard. Industrial automation systems and integration Open systems application integration framework AS ISO 15745.4 2004 ISO 15745-4:2003 AS ISO 15745.4 Australian Standard Industrial automation systems and integration Open systems application integration framework Part 4: Reference description for Ethernet-based

More information

Miscellaneous Publication

Miscellaneous Publication Miscellaneous Publication Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Part 1: Product Certification Program Basic rules and procedures This Joint

More information

COMMUNICATIONS ALLIANCE LTD AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY REVIEW OF THE TELECOMMUNICATIONS (TYPES OF CABLING WORK) DECLARATION

COMMUNICATIONS ALLIANCE LTD AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY REVIEW OF THE TELECOMMUNICATIONS (TYPES OF CABLING WORK) DECLARATION COMMUNICATIONS ALLIANCE LTD AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY REVIEW OF THE TELECOMMUNICATIONS (TYPES OF CABLING WORK) DECLARATION 24 MAY 2013 - 1 - - 2 - EXECUTIVE SUMMARY Communications Alliance

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO/IEC 27005:2012 Australian/New Zealand Standard Information technology Security techniques Information security risk management (ISO/IEC 27005:2011, MOD) This Joint Australian/New Zealand Standard

More information

Australian Standard. Information and documentation Records management processes Metadata for records. Part 1: Principles

Australian Standard. Information and documentation Records management processes Metadata for records. Part 1: Principles AS ISO 23081.1 2006 ISO 23081-1:2006 AS ISO 23081.1 2006 Australian Standard Information and documentation Records management processes Metadata for records Part 1: Principles This Australian Standard

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO/IEC 13235.3:2006 ISO/IEC 13235-3:1998 AS/NZS ISO/IEC 13235.3:2006 Australian/New Zealand Standard Information technology Open Distributed Processing Trading function Part 3: Provision of Trading

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO/IEC 18028.4:2006 ISO/IEC 18028-4:2005 AS/NZS ISO/IEC 18028.4:2006 Australian/New Zealand Standard Information technology Security techniques IT network security Part 4: Securing remote access

More information

FTTH BUILDERS GENERAL CHECKLIST. Information the builder needs to know

FTTH BUILDERS GENERAL CHECKLIST. Information the builder needs to know FTTH BUILDERS GENERAL CHECKLIST Information the builder needs to know What You Need To Know At CNTCorp, we like to keep things simple for our customers and partners. The purpose of this document is to

More information

A S ISO Records Management Part 1: General

A S ISO Records Management Part 1: General AS ISO 15489.1 2002 ISO 15489-1 AS ISO 15489.1 Australian Standard Records Management Part 1: General [ISO title: Information and documentation Records management Part 1: General] This Australian Standard

More information

Information and documentation Records management. Part 1: Concepts and principles AS ISO :2017 ISO :2016

Information and documentation Records management. Part 1: Concepts and principles AS ISO :2017 ISO :2016 ISO 15489-1:2016 AS ISO 15489.1:2017 Information and documentation Records management Part 1: Concepts and principles This Australian Standard was prepared by Committee IT-021, Records and Document Management

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO/IEC 15910:2004 ISO/IEC 15910:1999 AS/NZS ISO/IEC 15910 Australian/New Zealand Standard Information technology Software user documentation process AS/NZS ISO/IEC 15910:2004 This Joint Australian/New

More information

SA/SNZ TR ISO/IEC :2014

SA/SNZ TR ISO/IEC :2014 (ISO/IEC TR 20000-5:2013, IDT) Australian/New Zealand Technical Report Information technology Service management Part 5: Exemplar implementation plan for ISO/IEC 20000-1 SA/SNZ TR ISO/IEC 20000.5:2014

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4366:1996 ISO/IEC 12119:1994 Australian/New Zealand Standard Information technologysoftware packagesquality requirements and testing AS/NZS 4366:1996 This Joint Australian/New Zealand Standard was

More information

AS/NZS ISO/IEC 25030:2013

AS/NZS ISO/IEC 25030:2013 ISO/IEC 25030:2007, IDT Australian/New Zealand Standard Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Quality requirements AS/NZS ISO/IEC 25030:2013 This Joint Australian/New

More information

CORPORATE GOVERNANCE OF INFORMATION & COMMUNICATION TECHNOLOGY

CORPORATE GOVERNANCE OF INFORMATION & COMMUNICATION TECHNOLOGY AS 8015 2005 CORPORATE GOVERNANCE OF INFORMATION & COMMUNICATION TECHNOLOGY This Australian Standard was prepared by Committee IT-030, IT Governance. It was approved on behalf of the Council of Standards

More information

Telecommunications Equipment Certification Scheme FEBRUARY 2017

Telecommunications Equipment Certification Scheme FEBRUARY 2017 Telecommunications Equipment Certification Scheme FEBRUARY 2017 Canberra Red Building Benjamin Offices Chan Street Belconnen ACT PO Box 78 Belconnen ACT 2616 T +61 2 6219 5555 F +61 2 6219 5353 Melbourne

More information

AS/NZS ISO 19157:2015

AS/NZS ISO 19157:2015 AS/NZS ISO 19157:2015 (ISO 19157:2013, IDT) Australian/New Zealand Standard Geographic information Data quality Superseding AS/NZS ISO 19113:2004, AS/NZS ISO 19114:2005, and AS/NZS ISO 19138:2008 AS/NZS

More information

INDUSTRY GUIDELINE G649.1:2017 Cabling existing telecommunications services in the customer s premises for the nbn Part 1: Cabler instructions

INDUSTRY GUIDELINE G649.1:2017 Cabling existing telecommunications services in the customer s premises for the nbn Part 1: Cabler instructions COMMUNICATIONS ALLIANCE LTD INDUSTRY GUIDELINE G649.1:2017 Cabling existing telecommunications services in the customer s premises for the nbn Part 1: Cabler instructions G649.1:2017 Cabling existing telecommunications

More information

CNT Corp/REDTRAIN Networks will coordinate with your developer and builder to ensure the fibre optic service is provided with minimum delay.

CNT Corp/REDTRAIN Networks will coordinate with your developer and builder to ensure the fibre optic service is provided with minimum delay. REDTRAIN.com.au ADVANCING YOUR FUTURE WHO IS CNTCORP? CNTCORP was formed in 2003, and is a privately owned Australian company that holds an approved Australian carrier licensed (license no 279) with ACMA

More information

AS/NZS ISO/IEC/IEEE 42010:2013

AS/NZS ISO/IEC/IEEE 42010:2013 ISO/IEC/IEEE 42010:2011, IDT Australian/New Zealand Standard Systems and software engineering Architecture description AS/NZS ISO/IEC/IEEE 42010:2013 This Joint Australian/New Zealand Standard was prepared

More information

Pathways to ACMA Cabling Provider Rules Cabling registration JULY 2014

Pathways to ACMA Cabling Provider Rules Cabling registration JULY 2014 Pathways to ACMA Cabling Provider Rules Cabling registration JULY 2014 Canberra Red Building Benjamin Offices Chan Street Belconnen ACT PO Box 78 Belconnen ACT 2616 T +61 2 6219 5555 F +61 2 6219 5353

More information

Information on labelling and record-keeping Introduction devices

Information on labelling and record-keeping Introduction devices Information on labelling and record-keeping Electromagnetic compatibility requirements for suppliers of electrical and electronic devices, vehicles and devices with internal combustion engines in Australia

More information

Submission. to the. Australian Communications and Media Authority. on the. Cellular mobile repeaters a proposed regulatory approach

Submission. to the. Australian Communications and Media Authority. on the. Cellular mobile repeaters a proposed regulatory approach Submission to the Australian Communications and Media Authority on the Cellular mobile repeaters a proposed regulatory approach Submission by: Australian Mobile Telecommunications Association and Communications

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 14644.3:2009 AS/NZS 14644.3:2009 Australian/New Zealand Standard Cleanrooms and associated controlled environments Part 3: Test methods (ISO 14644-3:2005, MOD) AS/NZS 14644.3:2009 This Joint Australian/New

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Corrected version 2007-06-15 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité

More information

TITAB Assessor Registration Application. Telecommunications Cabler (CPE)

TITAB Assessor Registration Application. Telecommunications Cabler (CPE) TITAB AUSTRALIA CABLER REGISTRY SERVICES TITAB Assessor Registration Application Telecommunications Cabler (CPE) Please send completed application form to: TITAB Australia P O Box 348 Carlton South, Victoria

More information

Continuing Professional Development Program Guidelines

Continuing Professional Development Program Guidelines Continuing Professional Development Program Guidelines Much of what is learned in obtaining a qualification in today s rapidly changing business environment can quickly become obsolete. Most would agree

More information

AS/NZS ISO/IEC/IEEE :2015

AS/NZS ISO/IEC/IEEE :2015 (ISO/IEC/IEEE 29119-1:2013, IDT) Australian/New Zealand Standard Software and systems engineering Software testing Part 1: Concepts and definitions AS/NZS ISO/IEC/IEEE 29119.1:2015 This joint Australian/New

More information

Unit descriptor. Employability skills Prerequisite units. Co-requisite units. Application of the unit. Competency field Unit sector

Unit descriptor. Employability skills Prerequisite units. Co-requisite units. Application of the unit. Competency field Unit sector ICTCBL2005A Install customer cable support systems ICTCBL2005A Unit descriptor Install customer cable support systems This unit describes the performance outcomes, skills and knowledge required to install

More information

APPLICANT S GUIDE TO THE SUPPLIER AND EQUIPMENT REGISTRATION DATABASE

APPLICANT S GUIDE TO THE SUPPLIER AND EQUIPMENT REGISTRATION DATABASE L APPLICANT S GUIDE TO THE SUPPLIER AND EQUIPMENT REGISTRATION DATABASE Table of Contents 1. Introduction 3 1.1 General Information 4 2. Responsible Supplier 7 2.1 First Time Registration 7 2.1.2 Resending

More information

ICT30310 Certificate III in Telecommunications Cabling Qualification Notes

ICT30310 Certificate III in Telecommunications Cabling Qualification Notes ICT30310 Qualification Notes Certificate III in Telecommunications Cabling Descriptor This qualification reflects the role of an operator in the telecommunications industry who can apply a broad range

More information

AS/NZS ISO 13008:2014

AS/NZS ISO 13008:2014 (ISO 13008:2012, IDT) Australian/New Zealand Standard Information and documentation Digital records conversion and migration process AS/NZS ISO 13008:2014 This joint Australian/New Zealand standard was

More information

Information Bulletin

Information Bulletin Application of Primary and Secondary Reference Documents Version 1.1 Approved for release July 2014 Table of Contents 1.0 Purpose statement... 3 2.0 Audience... 3 3.0 BCA requirements and referenced documents...

More information

AS/ACIF S038:2001. Australian Standard. Requirements for ISDN Primary Rate Access Interface. For adoption for regulatory purposes

AS/ACIF S038:2001. Australian Standard. Requirements for ISDN Primary Rate Access Interface. For adoption for regulatory purposes AS/ACIF S038:2001 Australian Standard Requirements for ISDN Primary Rate Access Interface For adoption for regulatory purposes Australian Standard Requirements for ISDN Primary Rate Access Interface This

More information

NEBOSH Part A accreditation criteria

NEBOSH Part A accreditation criteria NEBOSH Part A accreditation criteria 1. The course provider must provide the following contact details for the five roles defined below: a) NEBOSH Communications Coordinator: The person to whom all correspondence

More information

INTERNATIONAL STANDARD. Technologies de I informa tion - Interconnexion de syst&mes ouverts (OS/) - Ges tion-sys tkmes: Fonction de ges tion d obje ts

INTERNATIONAL STANDARD. Technologies de I informa tion - Interconnexion de syst&mes ouverts (OS/) - Ges tion-sys tkmes: Fonction de ges tion d obje ts INTERNATIONAL STANDARD ISO/IEC 10164-I First edition 13-06-15 Information technology - Open Systems Interconnection - Systems Management: Object Management Function Technologies de I informa tion - Interconnexion

More information

Australian Standard. Information technology Communication interface connectors used in local area networks AS ISO/IEC/TR 9578:1990

Australian Standard. Information technology Communication interface connectors used in local area networks AS ISO/IEC/TR 9578:1990 AS 4028 1992 ISO/IEC/TR 9578:1990 Australian Standard Information technology Communication interface connectors used in local area networks This Australian Standard was prepared by Committee IT/1, Information

More information

Ongoing conformance of the product with the standard is the responsibility of the certificate holder and the Australian manufacturer or importer.

Ongoing conformance of the product with the standard is the responsibility of the certificate holder and the Australian manufacturer or importer. 1. Preface The (TECS) offered by Comtest Certification Body is based on a type test scheme, which is one where a representative sample is provided for testing and certification, and does not include any

More information

ISO/IEC INTERNATIONAL STANDARD

ISO/IEC INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO/IEC 27006 Second edition 2011-12-01 Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems

More information

ISO/IEC Conformity assessment Fundamentals of product certification and guidelines for product certification schemes

ISO/IEC Conformity assessment Fundamentals of product certification and guidelines for product certification schemes INTERNATIONAL STANDARD ISO/IEC 17067 First edition 2013-08-01 Conformity assessment Fundamentals of product certification and guidelines for product certification schemes Évaluation de la conformité Éléments

More information

PO Box ABN Locked. Bag 991 ISBN

PO Box ABN Locked. Bag 991 ISBN Meat Standards Australia Standards Manual Section 3: Licence and Trade Mark Meat Standards Australia PO Box 2363 Fortitude Valley, QLD, 4006. Level 2, 527 Gregory Terracee Fortitude Valley QLD 4006 Meat

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité

More information

Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems

Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO/IEC 27006 Third edition 2015-10-01 Information technology Security techniques Requirements for bodies providing audit and certification of information

More information

Regulatory Notice 14-39

Regulatory Notice 14-39 Regulatory Notice 14-39 Electronic Filing New Template Available on FINRA Firm Gateway for Compliance With SEA Rule 17a-5(f)(2) (Statement Regarding Independent Public Accountant) Executive Summary In

More information

ACCAB. Accreditation Commission For Conformity Assessment Bodies

ACCAB. Accreditation Commission For Conformity Assessment Bodies ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories

More information

ISO INTERNATIONAL STANDARD. Document management Part 5: Application of metadata for the construction and facility management sector

ISO INTERNATIONAL STANDARD. Document management Part 5: Application of metadata for the construction and facility management sector INTERNATIONAL STANDARD ISO 82045-5 First edition 2005-07-15 Document management Part 5: Application of metadata for the construction and facility management sector Gestion de documents Partie 5: Application

More information

AUSTRALIAN STANDARD AS/CA S042.4:2018 Requirements for connection to an air interface of a Telecommunications Network Part 4: IMT Customer Equipment

AUSTRALIAN STANDARD AS/CA S042.4:2018 Requirements for connection to an air interface of a Telecommunications Network Part 4: IMT Customer Equipment COMMUNICATIONS ALLIANCE LTD AUSTRALIAN STANDARD AS/CA S042.4:2018 Requirements for connection to an air interface of a Telecommunications Network Part 4: IMT Customer Equipment Australian Standard Requirements

More information

USDA ISO Guide 65 Program Accreditation for Certification Bodies

USDA ISO Guide 65 Program Accreditation for Certification Bodies Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements

More information

Plumbing Product Certification WaterMark Level 2

Plumbing Product Certification WaterMark Level 2 NCSI Recognition Booklet Addendum Plumbing Product Certification WaterMark Level 2 1. General In Australia most of the plumbing and drainage products and materials are required to be certified under the

More information

TELSTRA CORPORATION LIMITED (ABN ) Issue 4, 6 November 2013

TELSTRA CORPORATION LIMITED (ABN ) Issue 4, 6 November 2013 INFORMATION FOR PROPERTY DEVELOPERS, CONSULTANTS, BUILDERS AND CUSTOMERS Cabling of multi-storey rential buildings This publication has been prepared and written by Telstra Corporation Limited (ABN 33

More information

ISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security risk management

ISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security risk management INTERNATIONAL STANDARD ISO/IEC 27005 Second edition 2011-06-01 Information technology Security techniques Information security risk management Technologies de l'information Techniques de sécurité Gestion

More information

NZQA registered unit standard 8086 version 7 Page 1 of 5. Demonstrate knowledge required for quality auditing

NZQA registered unit standard 8086 version 7 Page 1 of 5. Demonstrate knowledge required for quality auditing Page 1 of 5 Title Demonstrate knowledge required for quality auditing Level 4 Credits 4 Purpose People credited with this unit standard are able to demonstrate knowledge of: quality auditing, preparation

More information

Engineering Recommendation G87 Issue

Engineering Recommendation G87 Issue PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Engineering Recommendation G87 Issue 2-2015 Guidelines for the Provision of Low Voltage Connections to Multiple Occupancy Buildings

More information

in Compliance Management NSW Associate Intensive (AGRCI)

in Compliance Management NSW Associate Intensive (AGRCI) Certificate IV in Compliance Management 91516 NSW Associate Intensive (AGRCI) Overview Introduction GRCI s Certificate IV in Compliance Management 91516 NSW has been developed to provide GRC professionals

More information

INSTALLATION GUIDE ADAPTEC SCSI CARD 29320LP

INSTALLATION GUIDE ADAPTEC SCSI CARD 29320LP INSTALLATION GUIDE ADAPTEC SCSI CARD 29320LP INTRODUCTION The Adaptec SCSI Card 29320LP enables you to connect up to 15 SCSI devices such as very large arrays of high-performance hard disk drives, external

More information

Demonstrate and apply knowledge of computer networking infrastructure principles

Demonstrate and apply knowledge of computer networking infrastructure principles Demonstrate and apply knowledge of computer networking infrastructure principles 22713 version 1 Page 1 of 5 Level 4 Credits 15 Purpose This unit standard covers the necessary introductory skills required

More information

Questions/queries: Feedback and suggestions welcomed: (+61)

Questions/queries: Feedback and suggestions welcomed: (+61) RTO Code 41319 Course outline: 443 Telecommunications F102A (Elective option B) UEENEEF102A - Install maintain cabling for multiple access to telecommunication services Qualification: Applicable to: Unit

More information

NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4

NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4 NZQF NQ Ref 0662 Version 2 Page 1 of 16 NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4 Credits 265 This qualification has been reviewed. The

More information

ISO/IEC INTERNATIONAL STANDARD. General requirements for the competence of testing and calibration laboratories

ISO/IEC INTERNATIONAL STANDARD. General requirements for the competence of testing and calibration laboratories INTERNATIONAL STANDARD ISO/IEC 17025 Second edition 2005-05-15 General requirements for the competence of testing and calibration laboratories Exigences générales concernant la compétence des laboratoires

More information

AS/NZS 3080:2003 AS/NZS

AS/NZS 3080:2003 AS/NZS AS/NZS 3080:2013 (ISO/IEC 11801:2011, MOD) Incorporating Amendment No. 1 Australian/New Zealand Standard Information technology Generic cabling for customer premises Superseding AS/NZS 3080:2003 AS/NZS

More information

TABLE OF CONTENTS. Page

TABLE OF CONTENTS. Page TABLE OF CONTENTS Page Policy Statement... 1 What kinds of personal information do we collect?... 1 How do we collect and hold personal information?... 1 How do we hold personal information?... 2 Purposes

More information

NSW Planning Portal. HowTo register for an account

NSW Planning Portal. HowTo register for an account NSW Planning Portal HowTo register for an account Disclaimer While every reasonable effort has been made to ensure that this document is correct at the time of printing, the State of NSW, its agents and

More information

Level 3 Award in Requirements for Electrical Installations BS7671: 2008 (2015) ( ) January 2015 Version 1.1

Level 3 Award in Requirements for Electrical Installations BS7671: 2008 (2015) ( ) January 2015 Version 1.1 QUALIFICATION HANDBOOK Level 3 Award in Requirements for Electrical Installations BS7671: 2008 (2015) (2382-15) January 2015 Version 1.1 Qualification at a glance Subject area City & Guilds number 2382

More information

It applies to personal information for individuals that are external to us such as donors, clients and suppliers (you, your).

It applies to personal information for individuals that are external to us such as donors, clients and suppliers (you, your). Our Privacy Policy 1 Purpose Mission Australia is required by law to comply with the Privacy Act 1988 (Cth) (the Act), including the Australian Privacy Principles (APPs). We take our privacy obligations

More information

Accreditation & Certification Supplier Guide

Accreditation & Certification Supplier Guide Accreditation & Certification Supplier Guide Network Connectivity Products and Services Connected Health Version 1.0 Table of Contents 1 PREFACE... 3 1.1 AUDIENCE...3 1.2 PURPOSE...3 1.3 SCOPE...3 2 CONNECTED

More information

ISO INTERNATIONAL STANDARD. Information and documentation Records management Part 1: General

ISO INTERNATIONAL STANDARD. Information and documentation Records management Part 1: General Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 15489-1 First edition 2001-09-15 Information and documentation Records management Part 1: General Information et documentation «Records management»

More information

FOOD SAFETY SYSTEM CERTIFICATION Part III: Requirements for Certification Process

FOOD SAFETY SYSTEM CERTIFICATION Part III: Requirements for Certification Process FOOD SAFETY SYSTEM CERTIFICATION 22000 Part III: Requirements for Certification Process Version 4.1: July 2017 Part III: Requirements for Certification Process Contents 1 Purpose... 3 2 Application process...

More information

ISO 5208 INTERNATIONAL STANDARD. Industrial valves Pressure testing of metallic valves

ISO 5208 INTERNATIONAL STANDARD. Industrial valves Pressure testing of metallic valves INTERNATIONAL STANDARD ISO 5208 Third edition 2008-08-01 Industrial valves Pressure testing of metallic valves Robinetterie industrielle Essais sous pression des appareils de robinetterie métalliques Reference

More information

Document Type Policy Procedure Process / Workflow Guideline Checklist. Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019

Document Type Policy Procedure Process / Workflow Guideline Checklist. Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019 Version Information Document Title Policy Document Type Policy Procedure Process / Workflow Guideline Checklist Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019 Policy Author / Editor Anna

More information

ISO INTERNATIONAL STANDARD. Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing

ISO INTERNATIONAL STANDARD. Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing INTERNATIONAL STANDARD ISO 1431-1 Fourth edition 2004-09-01 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing Caoutchouc vulcanisé ou thermoplastique

More information

NZQA registered unit standard version 2 Page 1 of 9. Install and maintain information and communications technology (ICT) systems and services

NZQA registered unit standard version 2 Page 1 of 9. Install and maintain information and communications technology (ICT) systems and services Page 1 of 9 Title Install and maintain information and communications technology (ICT) systems and services Level 4 Credits 25 Purpose This unit standard covers installation and maintenance of information

More information

##)44 ) REV #!,,).',).% )$%.4)&)#!4)/. 2%342)#4)/. ).4%'2!4%$ 3%26)#%3 $)')4!,.%47/2+ )3$. '%.%2!, 3425#452%!.$ 3%26)#% #!0!

##)44 ) REV #!,,).',).% )$%.4)&)#!4)/. 2%342)#4)/. ).4%'2!4%$ 3%26)#%3 $)')4!,.%47/2+ )3$. '%.%2!, 3425#452%!.$ 3%26)#% #!0! INTERNATIONAL TELECOMMUNICATION UNION ##)44 ) REV THE INTERNATIONAL TELEGRAPH AND TELEPHONE CONSULTATIVE COMMITTEE ).4%'2!4%$ 3%26)#%3 $)')4!,.%47/2+ )3$. '%.%2!, 3425#452%!.$ 3%26)#% #!0!"),)4)%3 #!,,).',).%

More information

RECOGNITION POLICY (RPL)

RECOGNITION POLICY (RPL) 1 RECOGNITION POLICY (RPL) POLICY In accordance with the Standards for RTOs 2015 MBA Group Training will recognize AQF qualifications and Statement of Attainment issued by other Registered Training Organisations

More information

Certified Trainer Program Guide

Certified Trainer Program Guide Certified Trainer Program Guide You can maximize your training opportunities by becoming a Sage certified trainer (CT). This unique program is designed for employees of Sage Software business partners

More information

ISO/IEC INTERNATIONAL STANDARD. Information technology Abstract Syntax Notation One (ASN.1): Information object specification

ISO/IEC INTERNATIONAL STANDARD. Information technology Abstract Syntax Notation One (ASN.1): Information object specification INTERNATIONAL STANDARD ISO/IEC 8824-2 Fifth edition 2015-11-15 Information technology Abstract Syntax Notation One (ASN.1): Information object specification Technologies de l'information Notation de syntaxe

More information

Our Customer Relationship Agreement REACH FAB SERVICE DESCRIPTION

Our Customer Relationship Agreement REACH FAB SERVICE DESCRIPTION Our Customer Relationship Agreement REACH FAB SERVICE DESCRIPTION Internode Pty Ltd ABN 82 052 008 581 Phone: 13 66 33 1/502 Hay Street, Subiaco WA 6008 15 October 2013 Rules of interpretation and capitalised

More information

Financial Adviser Standards and Ethics Authority Ltd

Financial Adviser Standards and Ethics Authority Ltd Financial Adviser Standards and Ethics Authority Ltd Corporations (Relevant Providers Exams Standard) Determination 2019 Explanatory Statement Corporations (Relevant Providers Exams Standard) Determination

More information

ISO/IEC TS Conformity assessment Guidelines for determining the duration of management system certification audits

ISO/IEC TS Conformity assessment Guidelines for determining the duration of management system certification audits TECHNICAL SPECIFICATION ISO/IEC TS 17023 First edition 2013-08-01 Conformity assessment Guidelines for determining the duration of management system certification audits Évaluation de la conformité Lignes

More information

SA/SNZ TR :2016

SA/SNZ TR :2016 SA/SNZ TR 61439.0:2016 (IEC TR 61439-0, Ed. 2.0:2013, MOD) Technical Report Low-voltage switchgear and controlgear assemblies Part 0: Guide to specifying assemblies SA/SNZ TR 61439.0:2016 SA/SNZ TR 61439.0:2016

More information

NZQA unit standard version 2 Page 1 of 5

NZQA unit standard version 2 Page 1 of 5 Page 1 of 5 Title Demonstrate knowledge of installation practices and procedures for telecommunications network equipment Level 3 Credits 10 Purpose This unit standard covers the installation of basic

More information

ISO/IEC INTERNATIONAL STANDARD. Information technology Mobile item identification and management Mobile AIDC application programming interface

ISO/IEC INTERNATIONAL STANDARD. Information technology Mobile item identification and management Mobile AIDC application programming interface INTERNATIONAL STANDARD ISO/IEC 29179 First edition 2012-02-01 Information technology Mobile item identification and management Mobile AIDC application programming interface Technologies de l'information

More information

Conformity assessment Requirements for bodies providing audit and certification of management systems. Part 6:

Conformity assessment Requirements for bodies providing audit and certification of management systems. Part 6: TECHNICAL SPECIFICATION ISO/IEC TS 17021-6 First edition 2014-12-01 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 6: Competence requirements

More information

Benefits of Accredited Conformity Assessment and the Supply Chain

Benefits of Accredited Conformity Assessment and the Supply Chain Benefits of Accredited Conformity Assessment and the Supply Chain By Sheronda Jeffries and Carmine Reda Companies purchase lots of things. They purchase tangible goods, such as raw materials and equipment;

More information

Revised November EFESC Handbook

Revised November EFESC Handbook Revised November 2015 EFESC Handbook 1 Table of Contents EFESC Handbook... 1 Table of Contents... 2 Handbook EFESC... 4 1 Background and objectives... 4 1.1 Sectoral developments... 4 1.1 Objectives...

More information

ISO/IEC Information technology Security techniques Network security. Part 5:

ISO/IEC Information technology Security techniques Network security. Part 5: INTERNATIONAL STANDARD ISO/IEC 27033-5 First edition 2013-08-01 Information technology Security techniques Network security Part 5: Securing communications across networks using Virtual Private Networks

More information

This Advisory Circular relates specifically to Civil Aviation Rules Part 147. Published by Civil Aviation Authority PO Box 3555 Wellington 6140

This Advisory Circular relates specifically to Civil Aviation Rules Part 147. Published by Civil Aviation Authority PO Box 3555 Wellington 6140 Advisory Circular AC 147-1 Part 147 Maintenance Training Organisations - Certification Revision 0.3 16 December 2015 General Civil Aviation Authority Advisory Circulars contain information about standards,

More information

ISO/IEC TR TECHNICAL REPORT. Information technology Security techniques Information security management guidelines for financial services

ISO/IEC TR TECHNICAL REPORT. Information technology Security techniques Information security management guidelines for financial services TECHNICAL REPORT ISO/IEC TR 27015 First edition 2012-12-01 Information technology Security techniques Information security management guidelines for financial services Technologies de l'information Techniques

More information

CODE OF PRACTICE FOR HOME WIRING

CODE OF PRACTICE FOR HOME WIRING CODE OF PRACTICE FOR HOME WIRING Residential Systems Including Energy Management & Electric Vehicle Charging 2015 EDITION N O R T H P A R K E S This document is proudly supported by: PREFACE Bringing the

More information

Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC :2011

Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC :2011 TECHNICAL REPORT ISO/IEC TR 90006 First edition 2013-11-01 Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011

More information

Application Guidelines. Last modified June

Application Guidelines. Last modified June Application Guidelines Last modified June 2017 1 Table of Contents Section 1: About the NER... 3 Section 2: Why be Registered on the NER?... 3 Section 3: NER Areas of Practice... 4 Section 4: Benefits

More information

Continuing Professional Development: Professional and Regulatory Requirements

Continuing Professional Development: Professional and Regulatory Requirements Continuing Professional Development: Professional and Regulatory Requirements Responsible person: Louise Coleman Published: Wednesday, April 30, 2008 ISBN: 9781-871101-50-6 Edition: 1st Summary Recent

More information