IBM Testpapers Now with Questions & Answers

Transcription

1 IBM Testpapers Now with Questions & Answers Number: Passing Score: 660 Time Limit: 90 min File Version: Pass IBM Now with Questions & Answers Exam Name: IBM PureFlex Technical Support V2 For Full Set of Questions please visit:

2 Testpapers QUESTION 1 Which of the following virtualization products is required to create logical partitions on the p460 compute node? A. HMC B. KVM C. IVM D. PowerVM /Reference: QUESTION 2 Which of the following features is only available with the Flex System Manager Advanced license? A. Image Management B. Fabric Management C. Storage Management D. Virtualization Management /Reference: QUESTION 3 An IBM customer is concerned with transfering their Power AIX workloads to PureFlex. Which of the following tools can predict the performance of AIX workloads on PureFlex? A. Power Configurator B. System Planning Tool C. Live Partition Mobility D. Systems Workload Estimator /Reference: QUESTION 4 A PureFlex prospect has CLARiiON CX4-240, AMS 2100, HP 8200, and Dell EqualLogic. They wish to consolidate by virtualizing with IBM Flex Systems V7000 Storage Node. Which of the following will be an issue? A. HP 8200 B. AMS 2100 C. Dell EqualLogic

3 D. CLARiiON CX4-240 /Reference: QUESTION 5 A prospect requires NIC teaming with redundant switches.the prospect is concerned about what the default IBM PureFlex Lab Services implementation includes. Which of the following is the minimum offering which includes setup of NIC teaming with redundant switches? A. Flex System B. PureFlex Express C. PureFlex Enterprise D. PureData for Analytics /Reference: QUESTION 6 There are a number of different ways to access a node console for Power and x86 compute nodes Which of the following is a supported method for this requirement? A. Physically plugging in a Console Breakout Cable B. Connection to the FSM management interface via serial port C. Connect remotely into the serial management port of the CMM D. Connect via browser to each imm2 on a node and invoke a remote PuTTY session to that node /Reference: QUESTION 7 A customer has purchased a PureFlex Express system and requires additional services for their POWER7 node with IBM i. Which of the following addresses this need? A. Add additional SWMA

4 B. Add IBM Lab Services Days in e-config C. Add separate IBM Lab Services contract D. Add services to the maintenance contract /Reference: QUESTION 8 How are the management networks of two PureFlex chassis interconnected? A. CMM external ports B. Interconnect nodes C. Front and rear flex cables D. Top of rack InfiniBand switch /Reference: QUESTION 9 A customer has a legacy x86 deployment on physical servers. What benefit does VMware offer to preserve legacy workloads? A. Allows use of Active Memory Expansion in VMware B. Allows use of IBM Storage Management Console for VMware vcenter plug-in C. User-controlled CPU frequencies allow slower legacy hardware timings to be preserved D. Select operating systems not natively supported on the new hardware are supported under VMware /Reference: QUESTION 10 A PureFlex technical specialist is discussing the PureFlex family with a prospective customer. They are concerned about available chassis space. Which PureFlex compute node option is full width? A. x240 B. p260 C. x220 D. p460

5 /Reference: QUESTION 11 A customer is considering a PureFlex Standard solution. Which of the following is included in the five day IBM Lab Services engagement? A. Demonstrate Live Application Mobility B. Implement System Server Pools with VMControl C. Create an image repository for use with VMControl D. Use vcenter to create a cluster of virtual servers /Reference: QUESTION 12 A customer has an application which requires access to more than two separate networks and has a limited number of physical ports to support the environment. They plan on implementing Virtual NIC interface. Which of the following meets these requirements? A Q relies on data center bridging B Q allows for NIC teaming providing additional ports C Q controls the quality of service which can be used to prioritize traffic to those applications D Q VLAN tagging is used to divide one physical Ethernet interface into several logical interfaces that belong to different VLANs /Reference: QUESTION 13 A prospect requires NIC teaming with redundant switches. The prospect is concerned about what the default IBM PureFlex Lab Services implementation includes. Which of the following is the minimum offering which includes setup of NIC teaming with redundant switches? A. Flex System B. PureFlex Express C. PureFlex Standard D. PureFlex Enterprise /Reference: QUESTION 14

6 A customer wants to purchase a p460 solution and obtain more cores over time as needed. Initially the customer requires 16 cores and need to increase to 32 cores over time. Which of the following must be purchased to meet this need? A. 32-core server and deactivate 16-cores.Reactivate the cores as needed. B. 16-core p460 and perform an MES to add an additional 16-cores when more are needed C. 32-core server with 16 cores active.use CUoD to activate more cores as needed over time D. 32-core server with 16 cores active.use CoD to activate more cores as needed for the additional cores. /Reference: QUESTION 15 Which of the following IBM systems management tools provides virtualization of ethernet MAC and Fibre Channel WWPN addresses for PureFlex Systems? A. IBM Fabric Manager B. IBM Flex System Manager VMControl C. Tivoli Storage Productivity Center D. IBM SmartCloud Virtual Storage Center /Reference: QUESTION 16 A PureFlex Enterprise prospect asks what is the maximum number of 2.5" HDDs/SSDs drives that can fit in each Storwize V7000 control enclosure and how many enclosures are supported for a in a non clustered configuration. Which of the following is the maximum number of drives per control enclosure and maximum number of expansion enclosures in this situation? A. 24 HDDs/SDDs and 2 expansion enclosures B. 12 HDDs/SDDs and 2 expansion enclosures C. 24 HDDs/SDDs and 9 expansion enclosures D. 12 HDDs/SDDs and 9 expansion enclosures /Reference: QUESTION 17 A PureFlex prospect has separate server, storage and network teams that communicate only through department managers. Which of the following requires the greatest communication and coordination between all three departments?

7 A. NPIV B. FCoE C. IEEE D. Fibre Channel Correct Answer: B /Reference: QUESTION 18 A customer wants to purchase a p460 node that has the lowest number of active cores on day one, with the ability to grow to the maximum number of cores over time. Which of the following should be ordered to meet the customer need? A. 32 core node with 31 cores deactivated; activate cores as needed B. 16 core node and upgrade to add 16 additional cores via a hardware MES. C. 32 core node with 4 active cores; use CUoD to permanently activate the other cores D. 32 core node with 4 active cores.use CoD to temporarily activate the other cores as needed. /Reference: QUESTION 19 A customer wants to purchase a PureFlex foundation with a p460 POWER7 compute node with 16 cores. Which of the following is the maximum amount of memory on the compute node, and memory per core if the memory is evenly distributed across all cores? A. 1TB per compute node with 32GB per core B. 1TB per compute node and 64GB per core C. 512GB per compute node and 16GB per core D. 512GB per compute node and 32GB per core Correct Answer: B /Reference: QUESTION 20 A customer decided to move their payroll and CRM to an externally hosted cloud environment. Which of the following describes this environment? A. Platform as a Service B. Software as a Service C. Infrastructure as a Service D. Business Process as a Service

8 /Reference: QUESTION 21 A PureFlex technical specialist is discussing the PureFlex family with a prospective customer. They are concerned about available chassis space. Which PureFlex compute node option is full width? A. x220 B. p220 C. p260 D. x220 with expansion /Reference: QUESTION 22 A Power Systems customer is considering a PureFlex based solution. The PureFlex technical specialist wants a simple way to document their current system configuration from the HMC to assist in designing the new solution. Which of the following GUI options will produce this information? A. System Plan B. System Profile C. System Properties D. View Hardware Topology /Reference: QUESTION 23 A customer is considering a PureFlex Express but they insist on using their own rack. Which of the following is the correct response for the PureSystem technical specialist? A. The PureSystem nodes may be installed in a BladeCenter H with an RPQ B. The chassis must be installed in an IBM rack specific to the PureFlex C. The chassis may be installed in an IBM rack specific to the BladeCenter D. Customers may use a non PureSystem rack, but it is not the preferred method /Reference:

9 QUESTION 24 A customer is considering a PureFlex Express. The customer wants redundant high speed Ethernet and redundant native Fibre Channel connections. Which of the following is the minimum number of switch bays required and number of switch bays remaining available for expansion? A. 2 and 2 B. 2 and 4 C. 4 and 0 D. 4 and 4 /Reference: QUESTION 25 A customer currently runs virtualized server environments on x86 and AIX. There are different teams and management for each platform, as well as different teams for storage, networking, etc. The customer wants to virtualize all department applications and consolidate resources. What is the most efficient way for a specialist to determine who is a decision maker or an influencer or a recommender? A. Talk to the CIO or CTO B. Talk to the Purchasing Agent to determine who makes decisions for server platforms C. Talk to the x86 Development Manager on how they are able to get workloads to run on x86 or AIX D. Talk to leaders in multiple organizations to understand how IT solution purchases have been funded /Reference: QUESTION 26 A business partner sales specialist and the business partner technical specialist are calling on a medium sized prospect that is designated as business partner led. The prospect raised several very technical specific questions comparing PureFlex Enterprise with a IBM UCS. Which of the following IBM resources should the technical specialist engage first to address those questions? A. Competeline B. Supportline C. IBM IBM alliance team D. Distributor configuration specialist /Reference:

10 QUESTION 27 A customer is looking over a configuration for a PureFlex System Express offering and is questioning a Lab Services line item with a quantity of three. The customer asks what this means. Which of the following is the correct description? A. Provides PureFlex training for up to three customer personnel. B. Up to three PureFlex compute nodes will be configured for the customer prior to shipment. C. A three day services engagement to implement the PureFlex chassis, management, storage, and primary node. D. An extension of three days to the included services engagement that is part of standard installation of a PureFlex purchase. /Reference: QUESTION 28 A prospect is considering a Flex System solution that has one p260 node and four x240 nodes. Virtualization hypervisors will be deployed on all five nodes. What component needs to be included for this solution to function? A. Internal disk B. Flex System V7000 C. Flex System Manager D. Converged network switches /Reference: QUESTION 29 Which of the following Storwize V7000 advanced functions allows for the retention of both the image mode and managed mode disks during migration, and provides seamless fail over in the event of a failure after the migration? A. FlashCopy B. Global Mirror C. VDisk Mirroring D. Thin Provisioning /Reference: QUESTION 30 A PureFlex Express prospect has a need for several very small partitions. Which of the following is the minimum percentage of a core needed to define an LPAR in a PureFlex POWER7+ compute node using

11 PowerVM? A. 1% B. 5% C. 10% D. 0.1% /Reference: QUESTION 31 A customer is contemplating two POWER-based solutions to run a compute intensive application. One option using IBM BladeCenter PS704 blades and another using IBM PureFlex p460 Compute Nodes. Which of the following attributes would make an IBM PureFlex solution attractive over IBM BladeCenter? A. L3 cache size B. Power requirements C. CPU clock frequency D. Number of I/O options /Reference: QUESTION 32 A PureFlex Enterprise prospect would like all of the services below. Which of the following must be covered by a separate contract in addition to the standard IBM Lab Services? A. Account Advocate B. External SAN integration C. Three year Warranty Service D. Two annual microcode analyses Correct Answer: B /Reference: