Fiery X3eTY2 65_55C-KM Color Server. Print Options

Transcription

1 Fiery X3eTY2 65_55C-KM Color Server Print Options

2 2008 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product March 2008

3 CONTENTS 3 CONTENTS INTRODUCTION 5 Terminology and conventions 5 About this document 6 PRINT OPTIONS OVERVIEW 7 About printer drivers and printer description files 7 Setting print options 8 Print option override hierarchy 9 PRINT OPTIONS 10 Print options and default settings 10 Print options 11 Booklet Maker options 27 Gang-up print options 30 Additional information 32 Auto Trapping 32 Booklet Maker 32 Duplex 34 Fold options 35 Gang-up print 36 Hole-Punch and Punch Holes 37 Image Shift 38 Paper Catalog 39 Paper size and Document size 40 Scale 41 Scale to Fit 41 Sorter Mode 42

4 CONTENTS 4 Stapling 42 Text Thinning/Reversed Text Enhancement 44 Gray Text Outlining 44 Text/Graphics Smoothing 44 INDEX 45

5 INTRODUCTION 5 INTRODUCTION This document provides a description of the Fiery X3eTY2 65_55C-KM Color Server print options. It also explains each print option and provides information about any constraints or requirements. For information about supported operating systems and system requirements, see Welcome. Terminology and conventions This document uses the following terminology and conventions. Term or convention Aero Copier Fiery X3eTY2 Mac OS Titles in italics Refers to Fiery X3eTY2 (in illustrations and examples) 65/55C-KM copier Fiery X3eTY2 65_55C-KM Color Server Apple Mac OS X Other documents in this set Windows Microsoft Windows 2000, Windows XP, Windows Server 2003 Topics for which additional information is available by starting Help in the software Tips and information Important information Important information about issues that can result in physical harm to you or others

6 INTRODUCTION 6 About this document This document covers the following topics: Information about printer drivers, printer description files, and setting Fiery X3eTY2 print options Descriptions of each print option, including default settings and any constraints or requirements Additional information about specific options and features

7 PRINT OPTIONS OVERVIEW 7 PRINT OPTIONS OVERVIEW This chapter describes printer drivers and PPD files, Fiery X3eTY2 print options, and where to set print options. For information about the specific print options for the Fiery X3eTY2, see the table that begins on page 11. About printer drivers and printer description files The Fiery X3eTY2 receives files from computers on the network, processes (RIPs) the files, and then sends them to the copier. Windows and Mac OS computers communicate with the Fiery X3eTY2 by means of a printer driver and PPD files. Windows computers can also communicate with the Fiery X3eTY2 by means of a Printer Control Language (PCL) printer driver and PDD files (the PCL equivalent of PPD files). The drivers allow you to use special features of the Fiery X3eTY2 from the Print dialog box. A printer driver manages printing communication between your application and the printer. It interprets the instructions generated by the application, merges those instructions with printer-specific options you set, and then translates all information into Adobe PostScript or PCL, a language the printer understands. In other words, the printer driver writes a PostScript or PCL file based on your original file and the options you set from the Print dialog box. A printer driver also allows you to select print options for your copier. To do this, the printer driver must be matched with a PPD/PDD file for your Fiery X3eTY2. A PPD/PDD file contains information about the features and capabilities of a particular device (for example, what paper sizes and media types are supported). The printer driver reads the information in the PPD/PDD file and presents the information to you in the form of options you select in the Print dialog box. The PPD/PDD file for the Fiery X3eTY2 includes information about the features of both the copier and the Fiery X3eTY2. For information about using the Basic tab to customize the printer driver, see Driver Help (Windows only).

8 PRINT OPTIONS OVERVIEW 8 Setting print options Print options give you access to the special features of your copier and Fiery X3eTY2. Specify print options using the following methods: During Setup Some settings are specified during Setup by the administrator. For information about the current default server settings, contact the administrator or operator. Alternatively, to determine the current Setup defaults, print the Configuration page from Command WorkStation. For information about printing a Configuration page, see Configuration and Setup. From applications With the Adobe PostScript and Windows-based PCL printer drivers, you can specify job settings when you print a job. For information about specifying job settings from Windows applications, see Printing from Windows. For information about specifying job settings from Mac OS applications, see Printing from Mac OS. From ColorWise Pro Tools Set the default CMYK Simulation Profile, CMYK Simulation Method, RGB Source Profile, RGB Separation, Output Profile, Rendering Style, Spot Color Matching, Print Gray using Black Only, Black Text/Graphics, and Black Overprint settings. For more information about using ColorWise Pro Tools, see Color Printing. From Hot Folders Assign a group of print options to a Hot Folder. When you specify print options for a Hot Folder, the print options are assigned to all jobs sent through that Hot Folder. These print options override any default options. For more information, see Utilities and Hot Folders Help. Overrides from Command WorkStation To change job settings from Command WorkStation, double-click a job to display the Properties dialog box. For more information, see Command WorkStation Help.

9 PRINT OPTIONS OVERVIEW 9 Print option override hierarchy The override hierarchy is as follows: A user s printer driver settings override the Fiery X3eTY2 Setup and ColorWise Pro Tools settings. A user s Hot Folders settings override any default options. Settings made from Command WorkStation override the user s printer driver settings.

10 PRINT OPTIONS 10 PRINT OPTIONS This chapter explains the Fiery X3eTY2 print options, default settings, and any constraints or requirements. This chapter also provides more detailed descriptions of specific features, beginning on page 31. Print options and default settings In the following table, underlined settings in the Option and settings column indicate default printer driver settings (PPD/PDD defaults). If you do not use the printer driver to configure a particular option, the Fiery X3eTY2 prints the job with the underlined setting. For options that you configure in Setup from Command WorkStation, WebTools Configure, or ColorWise Pro Tools, choosing Printer s default results in the Fiery X3eTY2 printing the job with the setting you specified in Setup. For options that cannot be configured in Setup, the Fiery X3eTY2 prints the job with a preconfigured Printer s default setting. For more information, see the Requirements, constraints, and information column in the table. To determine the current Setup defaults, print the Configuration page from Command WorkStation. For information about printing a Configuration page, see Configuration and Setup. The Printer driver location column in the following table indicates where to find the option in the Driver. On Windows, Printer driver location refers to the row of icons (or tabs) across the top of the window. On Mac OS, Printer driver location refers to the Feature Sets sub-menus, available when you select Printer Features from the main Mac OS X driver menu. When the location differs between operating systems, it is specified in parentheses. When an option is not available for Mac OS or PCL printing, it is noted in the Requirements, constraints and information column. When an option is accessed differently on Mac OS, it is also noted in this column. For information about using the Basic tab to customize the printer driver, see Driver Help (Windows only).

11 PRINT OPTIONS 11 Print options Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Auto Trapping Color (Win) ColorWise (Mac) Specify whether the job should automatically trap text and graphics to eliminate white edges around objects. For more information, see page 32 or Color Printing. Black Detection Color (Win) ColorWise (Mac) When printing jobs with both blackand-white and color pages, use this option to detect black-and-white pages before the job prints. Select Off if the job contains a significant number of color pages. For more information, see Color Printing. Select On if the job is predominantly black and white. Black Overprint Printer s default [Text/ Graphics]/ Off / Text / Text/Graphics Color (Win) ColorWise (Mac) Specify the type of black overprint style. Select Text to overprint black text only. Select Text/Graphics to overprint black text and graphics. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing. Black Text/Graphics Printer s default [Pure Black On]/Normal/ Pure Black On/ Rich Black On Color (Win) ColorWise (Mac) Select Normal to print black text and graphics as a four-color black using C, M, Y, and K toner, and to use normal PostScript rendering. Select Pure Black On to print black text and graphics using 100% black toner only. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. Select Rich Black On to print black text and graphics using 100% black toner, plus a layer of Cyan to make the black even darker. To access this option, click Expert Settings. For more information, see Color Printing.

12 PRINT OPTIONS 12 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Booklet Layout Select this option to use Booklet Maker, the imposition tool that allows you to quickly print documents in booklet format. For options and available settings, see the table that begins on page 27. For more information, see page 32. NOTE: On Mac OS, the Booklet options are only accessible from Command WorkStation Job Properties, not from the Driver. Brightness 85% Lightest/90% Lighter/ 95% Light/100% Normal/ 105% Dark/ 110% Darker/ 115% Darkest Image (Win) Image 1 (Mac) Select 85% for a substantially lighter image, 115% for a substantially darker image, or use one of the settings in between. CMYK Simulation Method Printer s default [Full (Output GCR)]/ Quick/ Full (Source GCR)/ Full (Output GCR) Color (Win) ColorWise (Mac) Select Quick to use one-dimensional transfer curves to adjust the density output of individual color channels. Select Full (Source GCR) for a more complete and accurate simulation. Full (Source GCR) applies colorimetric transformations that adjust hue, as well as output density. This option produces output that maintains the same amount of black as the source document. Select Full (Output GCR) to apply the same simulation method as Full (Source GCR), except that the output produced contains a black amount determined by the Output Profile. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing. CMYK Simulation Profile Printer s default [ISO Coated]/ DIC (EFI)/Euroscale/ISO Coated/ ISO Uncoated/JMPA v. 2 (EFI)/ Japan Color 2001 Type 1 (EFI)/ SWOP-Coated (EFI)/TOYO-Offset Coated 2.0/LC-Simulation/ None/ColorWise OFF Color (Win) ColorWise (Mac) Specify the simulation goal to be used for the current print job. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing.

13 PRINT OPTIONS 13 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Combine Separations Color (Win) ColorWise (Mac) When printing separations from supported desktop publishing applications: Select On to combine separations on a single page. Select Off to view separations as four (or more) individual black-and-white pages, each representing one color plate. For more information, see Color Printing. Composite Overprint Color (Win) ColorWise (Mac) Specify how to print the colors of overlapping images. Select On to print a combination of background and foreground colors where objects overlap. For more information, see Color Printing. Select Off to hide the background object where images overlap. Copies Job Info (Win) Copies & Pages (Mac) Specify the number of copies of a job that you want to print. NOTE: The maximum number of copies depends on your operating system. NOTE: On Mac OS, the equivalent option is accessible from the main Mac OS X driver menu under Copies and Pages. Copy Protect Off/COPY/INVALID/ILLEGAL COPY/INVALID COPY Stamping Use to identify or prevent unauthorized copies. When you select Copy Protect, the printed output will include a background pattern that is faintly visible on the printed document, however when the document is photocopied, the imprint is darker and distinctly visible. Copy Protect Background Pattern Cherry blossom/arabesque/ Lattice Stamping When using Copy Protect option, select the desired pattern. Copy Protect Color Black/Magenta/Cyan Stamping When using Copy Protect option, select the desired color.

14 PRINT OPTIONS 14 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Document Size 8.5x11/8.5x11S/A4/A4S/A3/ A5/A5S/8.5x14/11x17/ 5.5x8.5-S/A6S/B4/B5/B5S/B6S/ 8K/16K/16KS/SRA3/SRA4/ SRA4S/13x19/12x18/F4(8x13)/ ISO B4/ISO B5/ISO B5S/ 8.5x11 Tab/A4 Tab/ PostScript Custom Page Size Media The Document Size option determines the page size within your application. Use PostScript Custom Page Size to define a non-standard size. On Windows, you can also use PostScript Custom Page Size to print large size or long pages, such as banners, up to 330 x 1200 mm (12.99 x inches). NOTE: If the document s Paper size is different than the selected Document size, your document is scaled and printed at the specified Paper size. Mac OS. The following sizes are handled as standard sizes in the printer driver, but custom sizes on the 65/55C-KM copier: ISO B4, ISO B5, and ISO B5S. You can, however, assign names to these custom sizes at the copier touch panel. For information about Paper Size (in relation to Document Size), see page 39. For information about printing custom page sizes, see Printing from Windows or Printing from Mac OS. Duplex Off/Right & Left Binding/ Top Binding Layout Specify whether a job is printed single-sided or double-sided (duplex), by selecting a binding method. For more information about duplex printing, see page 34. Fold Off/Multi Half Fold/ Multi-Tri Fold-in Finishing (Win) Finishing 1 (Mac) Specify how you want your job to be folded. For more information about folding options, see page 35. A finisher must be installed for this option. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. NOTE: When you select a Fold option, Output Delivery is automatically set to Face Down - Normal Order. It is not possible to print a folded job face up or in reverse order. Fold Order Inside/Outside Finishing (Win) Finishing 1 (Mac) Specify whether the pages of your folded job print with imageable area on the inside or outside of the folded sheet. For more information about folding options, see page 35.

15 PRINT OPTIONS 15 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information FreeForm: Create Master None/1-100 VDP To create a FreeForm master for the current job, specify a number to assign to the FreeForm master file. NOTE: If Two-Way Communication is not enabled, this option allows you to create 1-15 FreeFrom Masters. For more information, see Variable Data Printing. For more information about creating FreeForm masters in Command WorkStation, see Command WorkStation Help. FreeForm: Preview Master Click to preview VDP Click to generate a low-resolution image of the selected FreeForm Master. Mac OS. This option is selectable only if you enable Use Master. For more information, see Variable Data Printing. FreeForm: Print Master Printer s default [No]/Yes/No VDP Select Yes to print your FreeForm Master page. NOTE: Printer s default reflects the setting specified in Fiery X3eTY2 Setup. NOTE: Applicable click charges occur when you print the Master. For more information, see Variable Data Printing. FreeForm: Use Master None/1-100 VDP For variable data print jobs, specify the FreeForm master to use for the job. NOTE: If Two-Way Communication is not enabled, this option allows you to use 1-15 FreeFrom Masters. For more information, see Variable Data Printing. For more information about using FreeForm in Command WorkStation, see Command WorkStation Help.

16 PRINT OPTIONS 16 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Full Bleed Printing Media Specify On to print full bleeds, which extend printing beyond the trim mark or edge of paper to ensure full coverage. PostScript printing. Gang-Up Print Cut & stack/ Step & repeat Glossy Layout Image (Win) Image 2 (Mac) Select Cut & stack to speed print a job, so that when the sheets are stacked and cut at the center, the two stacks combine to form a single, complete set of the document. Select Step & repeat to print your job so that each page is printed twice on each sheet of paper, so that when the copies are cut in half, the result is two complete sets of the same document. Specify to set printing to gloss an image to reflect light like a photograph. For options and available settings, see the table that begins on page 30. For more information, see page 36. NOTE: On Mac OS, this option is only available from Command WorkStation Job Properties. Gray Text Outlining Image (Win) Image 2 (Mac) Select On to sharpen text by adding an outline to the edge of halftone text and graphics. For more information, see page 44. Hole-Punch Off/Left/Right/Top Finishing (Win) Finishing 2 (Mac) Specify the position of the hole punch for your print job. To specify the number of holes, use the separate Punch Holes option. A finisher must be installed to use this option. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. For more information, see page 37. Image Quality Normal/Best Image (Win) Image 1 (Mac) Select Normal to provide a good quality image at high print speed. Select Best for higher output quality. However, selecting Best may affect the printing speed. Image Shift Finishing (Win) Image Shift (Mac) Select On to adjust an image on the page for various finishing options, such as stapling or punching. For more information, see page 38. Image Shift: Align front and back images Finishing (Win) Image Shift (Mac) Specify On to align the front cover image to the back cover image when using the Image Shift print option. For more information, see page 38. Image Shift: Units mm/inches/points Finishing (Win) Image Shift (Mac) Specify the measurement value when using the Image Shift print option. For more information, see page 38.

17 PRINT OPTIONS 17 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Image Smoothing Image (Win) Image 1 (Mac) Select On to minimize grainy output when printing low-resolution images. When you select On, Image Smoothing is enforced on all images. Input Tray AutoSelect/Bypass Tray/Tray 1/ Tray 2/Tray 3/Tray 4 (PFU)/ Tray 4 (LCT)/Tray 5 (PFU)/ PI Tray 1/PI Tray 2 Media (Win) Paper Feed (Mac) Specify the paper tray to use for your job. The AutoSelect setting automatically selects the tray containing the paper size specified for the job. NOTE: If you enable tray alignment, the Input Tray cannot be set to AutoSelect. NOTE: On Mac OS, the equivalent option (Paper Feed) is available from the main Mac OS X driver pull-down menu. Instructions Job Info (Win) Owner Information (Mac) Type instructions for the operator about the job. This field has a 127-character (alphanumeric and special characters) limit. Mirror Layout Select to print the mirror image of your print job, from right to left. Mac OS. Mixed Media User defined Media Click Define to specify the media types used for specific pages, or range of pages, in your print job. Select Define Each Chapter as a Separate Finishing Set to specify a finishing style (for example, stapling or folding) for each chapter or subset. NOTE: When using Define Each Chapter as a Separate Finishing Set, the finishing style for each chapter (or subset) must be the same. NOTE: This feature is not available for Mac OS. NOTE: This feature is not available for NOTE: For more information about Mixed Media, see Utilities. Notes Job Info (Win) Owner Information (Mac) Type information about the job. The Notes field has a 31-character limit. Orientation Portrait/Landscape Layout Specify Portrait or Landscape page orientation of the document. Orientation Override Off/Portrait/Landscape Layout Depending on the application you are using, a landscape job might print with the incorrect orientation. If this occurs, use this option to correct orientation for your job.

18 PRINT OPTIONS 18 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Output Delivery Face-down-normal order/ Face-up normal order/ Face-down-reverse order/ Face-up-reverse order Finishing (Win) Finishing 1 (Mac) Select Face-down-normal order to print your document on the bottom of the sheet of paper (the document outputs from the copier with the text facing down) in normal (1-N) order. NOTE: When you select a Fold option, Output Delivery is automatically set to Face-down-normal order. Select Face-up normal order to print your document on the top of the sheet of paper in normal (1-N) order. Select Face-down-reverse order to print your document on the bottom of the sheet of paper (the document outputs from the copier with the text facing down) in reverse (N-1) order. Select Face-up-reverse order to print your document on the top of the sheet of paper in reverse (N-1) order. Output Profile Use Media Defined Profile/ Use Server s Default/ Use Output Profile Color (Win) ColorWise (Mac) Specify the output profile to use for the current print job. You can associate a downloaded ICC profile with one of the Output Profile settings to manage the color conversion on the Fiery X3eTY2. Select Use Media Defined Profile for Mixed Media jobs. Select Use Server s Default to reflect the settings specified in Fiery X3eTY2 Setup. NOTE: If Two-Way Communication is enabled, Use Server s Default does not appear as an option. To access this option, click Expert Settings. For more information, see Color Printing. If you select Use Output Profile, choose one of the output profiles in the list. Output Tray Auto/Main Tray/Sub Tray/Fold Tray/Multi-Tri-Fold-in tray/ Saddle stitch Main tray/saddle stitch Sub tray Finishing (Win) Finishing 1 (Mac) Specify the output bin for your print job. A finisher must be installed to use this option. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. Page Order Layout When the Pages per sheet option is set to 2-up or more, use this option to select the page order layout from right to left, left to right, or top to bottom. Pages per sheet 1-up/2-up/4-up/6-up/9-up/ 16-up Layout Specify a layout (pages per sheet) for your print job.

19 PRINT OPTIONS 19 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Paper Catalog Select Media Media Click Select Media to access Paper Catalog, a dynamic database that stores the attributes of any paper available for printing from the Fiery X3eTY2. NOTE: Paper Catalog is not available from the Mac OS printer driver, but is accessible from Command WorkStation, Macintosh Edition. For information about accessing Paper Catalog, see page 39 and Utilities. NOTE: Paper Catalog is not available for Paper Color Printer s default [White]/ White/Non-White Media (Win) Media 1 (Mac) If you are using color media for your print job, specify Non-White. NOTE: Printer s default (PostScript only) reflects the setting specified in Fiery X3eTY2 setup. Paper Size Same as Document Size/8.5x11/ 8.5x11S/A4/A4S/A3/A5/A5S/ 8.5x14/11x17/5.5x8.5-S/A6S/ B4/B5/B5S/B6S/8K/16K/16KS/ SRA3/SRA4/SRA4S/13x19/ 12x18/F4(8x13)/ISO B4/ISO B5/ISO B5S/8.5x11 Tab/A4 Tab/ Define Custom Size Media (Win) Media 2 (Mac) Paper Size defines the dimensions of the actual piece of paper on which your job is printed. Select from the available list of paper sizes. Use Define Custom Size to print large size or long pages, such as banners, up to 330 x 1200 mm (12.99 x inches). If the document s Paper Size is different from the selected Document Size, the document is scaled and printed at the specified Paper Size. NOTE: To print long pages, you must disconnect the paper feed and output unit. For information about Paper Size (in relation to Document Size), see page 39. For information about Custom Page Sizes, see Printing from Windows or Printing from Mac OS. The following sizes are handled as standard sizes in the printer driver, but custom sizes on the 65/55C-KM copier: ISO B4, ISO B5, and ISO B5S. You can, however, assign names to these custom sizes at the copier touch panel. Paper Type Printer s default [Plain]/ Plain/Coated-GL/Coated-GO/ Coated-ML/Coated-MO/ Color Specific/High Quality Media (Win) Media 1 (Mac) Specify the type of paper used for your print job. NOTE: Printer s default (PostScript only) reflects the setting specified in Fiery X3eTY2 setup. Paper Weight Printer s default [64-74 g/m2] g/m g/m g/m g/m g/m g/m g/m g/m2 Media (Win) Media 2 (Mac) Specify the weight of the paper used for your print job. NOTE: Printer s default (PostScript only) reflects the setting specified in Fiery X3eTY2 setup.

20 PRINT OPTIONS 20 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Print Gray using black only (CMYK) Printer s default [Text/Graphics/ Images] Off / Text/Graphics / Text/Graphics/Images Color (Win) ColorWise (Mac) Select these settings to print a CMYK job using black toner instead of processed black. Select Text/Graphics to render text and graphic elements (vectors) in grayscale using black only, when cyan=0, magenta=0, and yellow=0, and the black (K) value is between 1 and 100. Select Text/Graphics/Images to render text, graphic elements (vectors), and images (rasters) in grayscale using black only, when cyan=0, magenta=0, and yellow=0, and the black (K) value is between 1 and 100. This option is designed to use black toner efficiently and reduce click charges, ensuring that a single blackand-white charge is incurred, instead of four color, when using a processed black. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. Print Gray using black only (RGB) Printer s default [Off]/ Off/ Text/Graphics/ Text/Graphics/Images Color (Win) ColorWise (Mac) Select these settings to print an RGB job using black toner instead of processed black. Select Text/Graphics to render text and graphic elements (vectors) in grayscale using black only, when the colors are defined with equal values in all three channels, for example red=128, green=128, and blue=128. This option is designed to use black toner efficiently and reduce click charges, ensuring that a single blackand-white charge is incurred. NOTE: The option is especially useful with PowerPoint and other Microsoft applications, which do not always properly register RGB conversion to grayscale. Select Text/Graphics/Images to render text, graphics (vectors), and images (rasters) in grayscale using black only, when the colors are defined with equal values in all three channels, for example red=128, green=128, and blue=128. For both settings, RGB values can range from R=0,G=0, B=0 to R=255,G=255, B=255. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. Print Mode (Drivers) Standard Color/Expert Color/ Grayscale Color Mode (Command WorkStation) CMYK/Grayscale Color (Win) ColorWise (Mac) Specify the color mode for the current print job. Select Standard Color, Expert Color, or CMYK for a full-color document. Select Grayscale for a grayscale or black-and-white document. The options differ depending on which printer driver you use. Click Expert Settings to set other color print options, including Black Overprint, Black Text/Graphics, and Print Gray Using Black Only. For more information, see Color Printing.

21 PRINT OPTIONS 21 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Print Page Border(s) Off/On Layout When the Pages per sheet option is set to 2-up or more, select On to print your pages with a border around the imageable area. Print Queue Action Print/Process and Hold/ Print and Hold Job Info Select Process and Hold if you want the job to RIP and not print. Select Print and Hold to save the raster file after printing. These settings are designed to allow a Wait and Proof function using the copier touch panel. When you select Process and Hold, the raster data is processed and the job is added to the Hold queue. You can then select the job to print at the copier from the copier touch panel Job List. When a multiple-set job is sent using Print and Hold, a single set is printed and the raster data for the job is held in the queue. You can then proof the initial copy and select the job in the Hold queue, specifying the number of copies that you want to print. Punch Holes Default/2-Holes/3-Holes/ 4-Holes Finishing (Win) Finishing 2 (Mac) Specify the number of holes for your print job. To specify the position of punched holes, use the separate Hole-Punch option. A finisher must be installed to use this option. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. The number of holes differs depending on the finisher configuration: For US, 2-holes or 3-holes (default) For EU, 2-holes or 4-holes (default) For more information, see page 37. Punched Paper Printer s default [Not Punched]/ Punched/No Punched Media (Win) Media 1 (Mac) Specify Punched when you insert prepunched media. NOTE: Printer s default (PostScript only) reflects the setting specified in Fiery X3eTY2 setup. Remove White PPT Background VDP Select On when using PowerPoint to create variable data in conjunction with FreeForm.

22 PRINT OPTIONS 22 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Rendering Style Printer s default [Presentation]/ Photographic/Presentation/ Relative Colorimetric/ Absolute Colorimetric Color (Win) ColorWise (Mac) Specify a default color rendering dictionary (CRD) to use when you print RGB images, objects, and text. Select Photographic for the less saturated output of photographs, including scans of photographs and digital camera images. Select Presentation for the more saturated colors of artwork, graphs, and photographs in presentation format. Select Relative Colorimetric when color matching is important, but you also want the white colors to match the white of the printed page. This setting eliminates borders between white objects and blank spaces. Select Absolute Colorimetric when exact color matching is desired. This setting does not transform white to match the white of the page and does not eliminate visible borders. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing. RGB Separation Printer s default [Output]/ Simulation/Output Color (Win) ColorWise (Mac) Select Simulation for RGB print jobs for which you want to simulate an output device other than the device to which you are printing. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing. RGB Source Profile Printer s default [Fiery RGB]/ EFIRGB/sRGB (PC)/Adobe RGB (1998)/ECI-RGB/Fiery RGB/ Apple Standard/None Color (Win) ColorWise (Mac) Specify a source color space definition for printing RGB images, objects, and text. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing.

23 PRINT OPTIONS 23 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Rotate 180 Layout Specify to rotate a landscape job 180 degrees. To select this option, you must first select Landscape from the Orientation menu. Scale 100%/25-400% Layout Specify a scaling override for your print job. NOTE: The supported range is 25 to 400. For more information, see page 41. Scale to Fit Layout Specify whether to scale your job to fit to a particular paper size. NOTE: If the document size is larger than the selected paper size and Scale to Fit is set to Off, a 2.5 mm margin is trimmed from the print area and the image in this margin is lost. For more information, see page 41. Screen Dot 1/Dot 2/Line1/Line 2 Image (Win) Image 1 (Mac) Specify if you want to switch between line or dot screens. Section Name Section Password Secure Print Job Info (Win) Owner Information (Mac) Job Info (Win) Owner Information (Mac) Job Info (Win) Owner Information (Mac) Enter up to eight characters (alphanumeric) for account tracking purposes. Enter up to eight characters (alphanumeric) for account tracking purposes. Allows you to print sensitive or confidential files only when you are present at the copier. To use Secure Print, enter an arbitrary job password in printer driver (Job Info tab) and enter it again at the copier touch panel for printing. For more information, see the documentation that accompanies your copier. For more information, see the documentation that accompanies your copier. The password is limited to alphanumeric characters (do not use symbols). For more information, see the documentation that accompanies your copier. Sorter Mode Collate/Uncollate/ Offset Collate/ Offset Uncollate Finishing (Win) Finishing 1 (Mac) Specify how to output multiple-page/ multiple-copy jobs.

24 PRINT OPTIONS 24 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Spot Color Matching Printer s default [On]/ Color (Win) ColorWise (Mac) Select Off to print specified PANTONE colors in your job using the current CMYK Simulation Profile and CMYK Simulation Method. Select On to activate the PANTONE Lookup Table. The Fiery X3eTY2 prints specified PANTONE colors in your job by matching the CMYK print blend to the same color from the PANTONE library. NOTE: If Two-Way Communication is not enabled, this option is set to Printer s default, which reflects the setting specified in ColorWise Pro Tools. To access this option, click Expert Settings. For more information, see Color Printing. Stapling Off/Top Left Corner/ Top Right Corner/ Left 2 Position/ Right 2 Position/ Top 2 Position/ Center Finishing (Win) Finishing 1 (Mac) Specify the number of staples and their positions. In order to use this option, a staple finisher must be installed. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. For more information, see page 42. Substitute Colors Color (Win) ColorWise (Mac) Enable this option to use the Substitute Color Values defined in the ColorWise Pro Tools Spot-On module. For more information, see Color Printing. Text/Graphics Smoothing Image (Win) Image 2 (Mac) Select On to smooth the edges of text and graphics. For more information, see page 44. Text Thinning/Reversed Text Enhancement Image (Win) Image 2 (Mac) Select On to sharpen the contrast of thin text printed against a color or black-andwhite background. When you select this option, thin text becomes bolder. For more information, see page 44. Toner Reduction Image (Win) Image 2 (Mac) Select On to reduce all CMYK output values by a copier-specified percentage. This option is designed to protect the copier s fuser and is typically used for thin paper (for example, gsm) printed with heavy toner coverage, which may jam the copier fuser. Toner Save Mode Image (Win) Image 1 (Mac) Select On to conserve toner. Setting this mode to On will significantly lighten the entire image. This mode is typically used for printing drafts.

25 PRINT OPTIONS 25 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information Tray Alignment Media (Win) Media 1 (Mac) Select On to enable Align Trays, a feature that adjusts the placement of text and images so that they are properly aligned for duplex printing. For information about using the Align Trays feature, see Utilities. NOTE: If you enable tray alignment, the Input Tray cannot be set to AutoSelect. Trimming Finishing (Win) Finishing 2 (Mac) Specify if you want to enable the trimmer. A finisher must be installed to use this option. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. Use Maximum C, M, Y density Image (Win) Image 2 (Mac) Select On to print C, M, or Y at the maximum density that the engine is capable of printing, regardless of calibration. This option is designed to create solid, saturated primary colors with CMYK printing. For best results, set the CMYK Simulation Profile to None in Print Mode > Expert Settings. If you set Toner Reduction to On, you override this setting. User Authentication Enter a user id Job Info (Win) Owner Information (Mac) If enabled, enter your User Authentication to print your job. To enable User Authentication, the 65/55C-KM copier and the Fiery X3eTY2 need to be set as follows: Copier user authentication Off and Fiery user authentication Off. Copier user authentication Internal and Fiery user authentication Off. Copier user authentication External and Fiery user authentication On. For information, see the documentation that accompanies your copier. User Authentication: I m a Guest Job Info If User Authentication is enabled, select this option to allow guest printing privileges. Guest printing must be set to On in the Fiery X3eTY2. NOTE: This option not available for Mac OS. For information about the copier s user authentication, see the documentation that accompanies your copier.

26 PRINT OPTIONS 26 Option and settings (default setting is underlined) Printer driver location Description Requirements, constraints, and information User Authentication: Password Enter a password Job Info (Win) Owner Information (Mac) If User Authentication is enabled on the Fiery X3eTY2 or the copier, enter Username and Password to print the job. If you are logged on to a Windows system (as a domain user), you can automatically use your Windows logon, otherwise type the local password or domain password. For Mac OS, select Installable Options and enter logon information in the User Name and Password fields. For information about the copier s user authentication, see the documentation that accompanies your copier. User Authentication: Save User Information Job Info Select On to save the user name and password for subsequent session. For information about the copier s user authentication, see the documentation that accompanies your copier. Mac OS. User Authentication: Use Windows Login Job Info If User Authentication is enabled on the Fiery X3eTY2 or the copier, select this option to automatically use your Windows login name and password. For information about the copier s user authentication, see the documentation that accompanies your copier. Mac OS. User Authentication: Username Enter a username Job Info (Win) Owner Information (Mac) If User Authentication is enabled on the Fiery X3eTY2 or the copier, enter Username and Password to print the job. If you are logged on to a Windows system, you may automatically use your Windows logon, otherwise type the local username or domain username. For Mac OS, select Installable Options and enter logon information in the User Name and Password fields. For information about the copier s user authentication, see the documentation that accompanies your copier. Watermarks None/CONFIDENTIAL/COPY/ DRAFT/ORIGINAL/TOP SECRET Stamping Select a standard watermark or click New to create your own. Mac OS. For advanced watermarks (typically used to prevent fraudulent or unauthorized copies), see the Copy Protect option. Print Watermarks: First Page Only Stamping To print a watermark on the first page only, specify Print Watermarks : First Page Only. Mac OS. Print Watermarks: Transparent Stamping To print watermarks as transparent text (PCL only), specify Transparent. Mac OS.

27 PRINT OPTIONS 27 Booklet Maker options The following table provides a short description of Booklet Maker options and available settings, with the default (where relevant) underlined. The options are listed in the order that follows the booklet-making process, with the steps in Basic mode indicated at left in Gray text. Any differences between Basic and Advanced mode are noted in the same column and in the Requirements, constraints, and information column. For additional information and constraints/limitations, see page 32. For information about designing booklets using Booklet Maker, see Booklet Maker Help. s Option and available settings Description Requirements, constraints, and information Booklet type: Booklet Type Saddle/Nested Saddle/Perfect Booklet type: Binding edge Left binding/right binding/ Top binding Booklet Type determines how the signatures of your booklet are folded and imposed. Binding edge determines the location of the spine of your booklet. For information about booklet type and binding methods, see Booklet Maker Help. For information about binding edge, see Booklet Maker Help. Booklet type: Cover Basic mode: Cover is prepared for the booklet/cover is not prepared Advanced mode: The Cover option (Saddle only) allows you to prepare a cover for your booklet. If you select Cover is prepared for the booklet, you will define the Cover content, Cover media, and Booklet Cover Source in the final steps of booklet process. If you select Cover is not prepared, Booklet Maker skips the remaining Cover options. For information about cover options, see Booklet Maker Help. Paper size: Paper Size for 2-up Select from Paper Catalog/ Define Custom Size/ 8.5x11/8.5x11S/A4/A4S/ A3/A5/A5S/8.5x14/11x17/ 5.5x8.5-S/B4/B5/B5S/8K/ 16K/16KS/SRA3/SRA4/ SRA4S/13x19/12x18/ F4(8x13)/8.5x11 Tab/ A4 Tab/ISO B4/ISO B5/ISO B5S Paper Size for 2-up defines the size of the sheet of paper (unfolded) on which your booklet is printed. To select a paper size for your booklet, do one of the following: Select from the list of available sizes in the Paper size menu. Select from Paper Catalog to access a dynamic database that stores the media attributes of any paper available for printing from the Fiery X3eTY2. For information about Paper size for 2-up imposition, see Booklet Maker Help. For information about Paper Catalog, see Utilities. For information about printing custom pages, see Printing from Windows or Printing from Mac OS. Paper size: Document Size Select from Paper Catalog/ Define Custom Size/ 8.5x11/8.5x11S/A4/A4S/ A3/A5/8.5x14/11x17/ 5.5x8.5-S/B4/B5/B5S/B6S/8K/ 16K/16KS/SRA3/SRA4/SRA4S/ 13x19/12x18/F4(8x13)/ ISO B4/ISO B5/ISO B5S/ 8.5x11 Tab/A4 Tab Document Size reflects the page size defined in your original application s Print setup (or Page Setup) dialog box. To override Document Size, select from the list of available sizes or choose Define Custom Size. For information about Document Size in booklet design, see Booklet Maker Help. For information about the supported range of custom sizes, see page 33. When you access Booklet Maker from Command WorkStation Job Properties, Document Size is not an option.

28 PRINT OPTIONS 28 Option and available settings Description Requirements, constraints, and information Paper size: Orientation Portrait/Landscape Paper size: Shrink to fit Paper size and Subset size: Number of sheets in a subset (saddle) 1 20 Page alignment: Align pages At the center/at the spine Page alignment: Increase gutter by 0-50 mm (1 mm increments) in (.01 inch increments) Orientation displays the aspect ratio (Portrait or Landscape) defined in your original application s Print setup (or Page Setup) dialog box. When Booklet Maker is accessed from the Windows Driver, you can use this option to override the orientation defined in your original document. Shrink to fit automatically scales down the document page to fit the paper size specified from the Paper size menu. When Shrink to fit is set to Off, page contents print at 100%. NOTE: Shrink to fit only scales down the document page size; the control does not scale up or enlarge. When Nested Saddle is selected, use this option to specify the number of sheets in each subset (saddle). Align pages positions page content in relation to the center of one-half the paper size or the spine, the center of the sheet where the fold occurs. At the center positions page content in the center of one-half the specified paper size. At the spine aligns page content with the spine or center fold of your booklet. Increase Gutter by adds extra white space between adjacent pages to allow space for binding or other finishing options. For more information about Orientation in booklet design, see Booklet Maker Help. When you access Booklet Maker from Command WorkStation Job Properties, Orientation override is not an option. For more information about Shrink to fit, see Booklet Maker Help. NOTE: The Shrink to fit option is only accessible in Advanced mode. NOTE: This option only appears when Nested Saddle is selected. For more information about page alignment, see Booklet Maker Help. For more information about gutters, see Booklet Maker Help. For the supported range of gutter value, see page 33. Page alignment: Compensate creep for Off/Plain/Thick Compensate creep for positions page content to counteract the shift that occurs when sheets are folded to create Saddle and Nested Saddle booklets. (Creep is not a factor in Perfect booklets.) Select Plain when printing Saddle or Nested Saddle booklets with a large number of pages. Select Thick when printing Saddle or Nested Saddle booklets on heavyweight paper. For more information about creep, see Booklet Maker Help.

29 PRINT OPTIONS 29 Option and available settings Description Requirements, constraints, and information Cover Content: Content input None (use insert)/ As Separate Pages Content Input (Saddle only) defines whether your cover is printed separately and inserted, or printed as part of your booklet print job in a single pass. Select None (use insert) to insert a pre-printed cover that will be added to the body pages from an inserter tray. Select As Separate Pages to include cover content (individual pages in your document) as part of your booklet print job. For information about cover options, see Booklet Maker Help. Cover Content: Front Cover Print on outside/ Print on inside/ Print on both sides/ Do not print Front Cover (Saddle only) defines how the content of the front cover is printed. Select Print on outside to print only on the outside of the front cover (the inside of the front cover will be blank). Select Print on inside to print only on the inside of the front cover (the outside of the front cover will be blank). Select Print on both sides to print on both the inside and outside of the front cover. Select Do not print if you do not want any content printed on the front cover. For information about cover options, see Booklet Maker Help. NOTE: When you add a cover, blank pages may be inserted depending on the allocation of pages to signatures in the job. Cover Content: Back Cover Print on outside/ Print on inside/ Print on both sides/ Do not print Back Cover (Saddle only) defines how the content of the back cover is printed. Select Print on outside to print only on the outside of the back cover (the inside of the back cover will be blank). Select Print on inside to print only on the inside of the back cover (the outside of the back cover will be blank). Select Print on both sides to print on both the inside and outside of the back cover. Select Do not print if you do not want any content printed on the back cover. For information about cover options, see Booklet Maker Help. NOTE: When you add a cover, blank pages may be inserted depending on the allocation of pages to signatures in the job.

30 PRINT OPTIONS 30 Option and available settings Description Requirements, constraints, and information Cover Media: Cover Media Same as body Select From Paper Catalog Cover Media: Booklet Cover Source Auto Detect/Tray 1/Tray 2/ Tray 3/Tray 4 (PFU)/ Tray 4 (LCT)/Tray 5 (PFU)/ PI Tray 1/PI Tray 2 Cover Media (Saddle only) specifies the media for your booklet print job. Choose Same as body to use the same media as the body pages of your booklet. Choose Select from Paper Catalog to access a dynamic database that stores the media attributes of any paper available for printing from the Fiery X3eTY2. Booklet Cover Source (Saddle only) designates the tray that contains the cover media for your booklet. For information about cover options, see Booklet Maker Help. For information about Paper Catalog, see Utilities. For information about cover options, see Booklet Maker Help. Gang-up print options Option and settings (Default setting underlined) Gang-up type Step & repeat/cut & stack Paper Size Select from Paper Catalog/ Define Custom size/ 8.5x11/8.5x11S/A4/A4S/ A3/A5/A5S/8.5x14/11x17/ 5.5x8.5-S/B4/B5/B5S/8K/ 16K/16KS/SRA3/SRA4/ SRA4S/13x19/12x18/ F4(8x13)/8.5x11 Tab/ A4 Tab/ISO B4/ISO B5/ISO B5S Description Select Step & repeat to speed print a job by printing two document pages on each sheet. When the printed sheets are cut in half, the result is two complete sets of the same document. Select Cut & stack to speed print a job by printing two document pages side by side. When the printed sheets are cut in half and stacked, the result is one complete set of the document (in faster printing time). Paper Size defines the size of the sheet of paper on which your gang-up job will print. Select from the list of available sizes in the Paper Size menu. Select from Paper Catalog to access a dynamic database that stores the media attributes of any paper available for printing from the Fiery X3eTY2. Select Define Custom size to select a non-standard paper size. Requirements, constraints, and information For more information about Gang-up printing, see page 30.

31 PRINT OPTIONS 31 Option and settings (Default setting underlined) Document Size Define Custom Size/ 8.5x11/8.5x11S/A4/A4S/ A3/A5/A5S/8.5x14/11x17/ 5.5x8.5-S/B4/B5/B5S/8K/ 16K/16KS/SRA3/SRA4/ SRA4S/13x19/12x18/ F4(8x13)/8.5x11 Tab/ A4 Tab/ISO B4/ISO B5/ISO B5S Orientation Portrait/Landscape Shrink to fit Increase gutter by 0 50 millimeter (1 mm increments) inch (.01 inch increments) Duplex Off/Right & Left Binding Description Document Size is the page size defined in the original application s Print setup (or Page Setup) dialog box. To override specified Document Size, select from the list of available sizes or choose Define Custom Size. Displays the aspect ratio (Portrait or Landscape) defined in the original application s Print setup (or Page Setup) dialog box. If necessary, use this option to override orientation. Scales down the document page to fit the paper size that you select. When Shrink to fit is set to Off, page contents print at 100%. NOTE: Shrink to fit only scales down the document page size; the control does not scale up or enlarge. Controls the amount of space between adjacent pages on a sheet to adjust for trimming or other finishing options. Select Off for single-sided printing. Select Right & Left Binding for duplex (twosided) printing with both sides using the same short edge. Requirements, constraints, and information

32 PRINT OPTIONS 32 Additional information The following sections provide additional information about print options. For more information about the settings, requirements, and constraints in effect for these options, see the table that begins on page 10. Auto Trapping Trapping is a technique to print some objects slightly larger or smaller than specified in an application, in order to prevent white edges around the objects. These white edges, or halos, can be caused by factors such as misregistration, the physical properties of the toners, and the stiffness of the media. The Auto Trapping feature provides you with advanced trapping settings and gives you full control over their values. For more information, see Color Printing. Booklet Maker Booklet Maker is the imposition tool that allows you to quickly print documents in booklet format, without the need for more involved page imposition programs. Booklet Maker provides advanced settings, while streamlining the booklet-making process by displaying only the options relevant to your selections. Booklet Maker is capable of imposing jobs created in nearly any application. Booklet Maker supports the following booklet types: 2-up booklets (Saddle, Nested Saddle, and Perfect binding) prints four individual pages on a single sheet printed duplex, two pages per side, which is then folded in half to form a booklet. The following binding methods are supported: Saddle binding Nested Saddle binding Perfect binding Saddle: Signatures are folded together as a group, and then stapled or stitched along the center fold, which forms the spine of the booklet. Nested Saddle: Two or more saddle booklets (called subsets ) are joined to form a larger booklet. The subsets are stacked adjacent to one another for trimming and/or gluing. Perfect: Signatures are folded individually, and then stacked along the common fold, which forms the spine of the booklet. Folded pages are stacked adjacent to one another for trimming and/or gluing. For Booklet Maker options and available settings, see page 27. For information about using Booklet Maker options, see Booklet Maker Help.

33 PRINT OPTIONS 33 Accessing Booklet Maker You can access Booklet Maker in the printer driver (Windows only) when you print a job, or in Command WorkStation Job Properties (Windows and Mac OS) where you modify a job s properties. TO ACCESS BOOKLET MAKER FROM THE WINDOWS DRIVER 1 In your application, choose File > Print. 2 Select your copier from the Printer Name list, and then click Properties. 3 In Driver, click the Layout tab, select the Booklet option, and then click Settings. TO ACCESS BOOKLET MAKER FROM COMMAND WORKSTATION 1 Double-click your print job in the Active Jobs window, or right-click the job and select Properties from the pull-down menu. 2 Click the Layout tab in the Job Properties window. 3 Select the Booklet option, and then click Settings. Booklet Maker: Custom sizes (2-up imposition) Booklet Maker supports custom page sizes for body and covers pages. To define a Custom page size, select Define Custom Size from the Document Size or Paper Size menu, and enter dimensions within the following range: Units Width Height Inch Millimeters Points ,242 Gutters (2-up imposition) A gutter is an extra margin between facing pages that designed to allow space for binding or other finishing options. The supported range of gutter values and increments are as follows: Units Range Increment Inch Millimeters

34 PRINT OPTIONS 34 Booklet Maker: Constraints/Limitations Secured PDF: Adobe PDF files can be saved with security settings that restrict opening, printing, or editing the PDF file (a Restricted Document ). Restricted Documents cannot be printed when using Booklet Maker. Queue type: Booklet Maker does not support jobs sent to the Direct queue. Booklet Maker jobs must be sent to the Hold queue or Print queue. Print Options/Command WorkStation Job Properties overrides Variable Data Printing is not supported with Booklet Maker. Mixed Media is not supported with Booklet Maker. Remove White PPT Background (designed for use with PowerPoint documents) is not supported with Booklet Maker. Duplex Duplex printing features are only available when printing from specific trays. When the Duplex print option is set to one of the duplex settings, the copier automatically turns the paper for printing on the opposite side. TO PRINT DUPLEX PAGES 1 Choose Print in your application and locate the Duplex print option. 2 Choose one of the following Duplex settings: Right & Left Binding: Prints the top of the image on Side 1, on the same edge of the page as the top of the image on Side 2. Top Binding: Prints the top of the image on Side 1, on the opposite edge of the page from the top of the image on Side 2. The following table shows how the Duplex settings correspond to printed output: Right & Left Binding Top Binding Portrait Landscape

35 PRINT OPTIONS 35 Fold options The following types of fold are supported: NOTE: The Fold Order option allows you to specify whether text/images print on the inside or outside of the folded sheet. The default is Inside. Multi Half Fold Multi-Tri-Fold-in NOTE: When you select a folding option, Output Delivery is automatically set to Face-downnormal-order. It is not possible to print folded jobs face up or in reverse order. Special finishers must be installed to use the Fold options. For information about installing finishers and other installable options, see Printing from Windows and Printing from Mac OS.

36 PRINT OPTIONS 36 Gang-up print Gang-up printing involves duplicating individual pages or images on a single sheet for faster printing time. The following types of Gang-up printing are supported: Step & Repeat: Choose this setting to print a job so that the data on the first page is duplicated on the same sheet. The next sheet duplicates the data on the second page, and so forth. When each stack of printed copies is cut in half, the result is two complete sets of the same document in faster printing time. Single-sided Two-sided (Duplex) Front only Front Back Cut & Stack: Choose this setting to speed print a job so that when the sheets are stacked and cut from the central position, the job is numbered in order and separated as two stacks. The order of print is such that when they are cut in half, they can be combined to form a single complete set of the document in much faster printing time. Single-sided Two-sided (Duplex) Front only Front Back You can access Gang-up printing in the Windows Driver when you print a job, or on both Windows and Mac OS in Command WorkStation where you can modify a job s properties. TO ACCESS GANG-UP PRINT FROM WINDOWS DRIVER 1 Choose File > Print in your application. 2 Select the Fiery X3eTY2 as your copier, and then click Properties. 3 Click the Layout tab, select the Gang-up printing type, and then click Settings.

37 PRINT OPTIONS 37 TO ACCESS GANG-UP PRINT FROM COMMAND WORKSTATION 1 Double-click your print job in the Active Jobs window, or right-click the job and select Properties from the pull-down menu. 2 Click the Layout tab in the Job Properties window. 3 Select the Gang-up printing option, and then click Settings. Hole-Punch and Punch Holes Punch positions vary according to paper size, paper type, number of pages, and feed direction. The number of holes differs depending on finisher destination: US, 2-holes or 3-holes, with 3-holes the default EU, 2-holes or 4-holes, with 4-holes the default The following table illustrates the number of holes and punch positions Punch setting Portrait Landscape Left Right Top Left Right Top 2 holes 3 holes 4 holes A finisher must be installed to use the hole punch options. For information about installing finishers and other installable options, see Printing from Windows or Printing from Mac OS.

38 PRINT OPTIONS 38 Image Shift Image Shift allows you to change your margins after the fact. With Image Shift you can specify how much the image on each page should be shifted relative to the X (horizontal) and Y (vertical) axes. Moving the job content in this manner enables you to allow for various finishing options, such as stapling and binding. TO DEFINE IMAGE SHIFT FOR A PRINT JOB 1 In the printer driver, click the Image Shift tab. 2 Select the unit of measurement. 3 Enter the Front and Back image shift settings using the X and Y axis fields. You can also use the arrow buttons to shift the image settings. NOTE: The maximum value for both X and Y axes is points/13.89 inches/ mm. 4 To align front and back images proportionately, select Align front and back images.

39 PRINT OPTIONS 39 Paper Catalog Paper Catalog is a system-based paper warehouse database that stores the attributes of any media that is available for printing from the Fiery X3eTY2. NOTE: On Mac OS, Paper Catalog is not accessible from the printer driver, but can be accessed form Command WorkStation, Macintosh Edition, Job Properties. On Windows, Paper Catalog can be accessed from both the printer driver and Command WorkStation Job Properties. The following procedure describes how to access Paper Catalog from the Windows printer driver. TO ACCESS PAPER CATALOG FROM THE WINDOWS PRINTER DRIVERS 1 Establish Two-Way Communication between your computer and the Fiery X3eTY2 by entering the IP Address or DNS name in Properties. For information about establishing Two-Way Communication, see Printing from Windows. 2 Select Print from your application and click Properties. 3 Click the Media icon and select the required media from the Paper Catalog pull-down menu. 4 Click Select Media to view the entire database and the full descriptions of paper attributes. For information about accessing Paper Catalog from Command WorkStation, Mixed Media, and Hot Folders, see Utilities.

40 PRINT OPTIONS 40 Paper size and Document size Document size is the page size defined in your application s Print setup (or Page Setup) dialog box. Paper size is the size of the actual sheet of paper on which your job is printed. It may be useful to think of Document size as digital input (the page size defined in your original document) and Paper size as the physical output (the actual size of the paper in the copier tray). In cases when you print one document page per sheet of paper, Document size is usually the same as the Paper size. However, Document size may differ from Paper size when you print booklets or impose multiple document pages on a single sheet. Document size may also differ from Paper size when using the Scale or Scale to Fit options. The Scale option reduces or enlarges the document page at a specified percent. The Scale to Fit option automatically reduces or enlarges the document image to fit the selected Paper size. The following illustrations show examples of possible relationships between Document size and Paper size. Note that the orientation of all pages shown is Landscape. Document size is the same as Paper size. Scaling is 100%. Document size (input) Letter A Paper size (output) Letter A Tabloid Document size scaled to fit on Letter Paper size. Scaling is 50%. A4 Document size scaled to fit on A3 Paper size. Scaling is 141%. Tabloid 11x17 Letter A A A4 A3 A A For information about Scale to Fit, see page 41.

41 PRINT OPTIONS 41 Scale The operator can specify a scaling override in Command WorkStation, but the override is applied to any scaling value already set in the active job. For example, if a user sends a job with a scaling value of 50% and the operator specifies a Scale override of 300%, the job is printed at 150% of the original document size, that is, 50% of 300%. Scale to Fit This option allows you to scale a job to a paper size different from the image size. When you set this option to On, the image is increased or reduced in size to fit a paper size you select from the Paper Size option. When you set this option to Off, the original document size is printed without any scaling, even if you print to a larger paper size. If the document size is larger than the selected paper size and Scale to Fit is set to Off, a 2.5 mm margin is trimmed from the print area and the image in this margin is lost. Original size 8.5 x 11 Print Size 11 x 17 Scale to Fit set to On Scale to Fit set to Off

42 PRINT OPTIONS 42 Sorter Mode Sorting and collating is supported on the copier. Sort: Copies of a complete job are collated and output in the same direction, arranged in this page order: 1-2-3, 1-2-3, Group : Copies of a complete job are collated and output in the same direction, arranged in this page order: 1-1-1, 2-2-2, Sort with Shift : Copies of a complete job are output in the same direction, arranged in this page order: 1-2-3, 1-2-3, This option includes offset stacking. Group with Shift : Copies of a complete job are output, arranged in this page order: 1-1-1, 2-2-2, This option includes offset stacking. Stapling Stapling is supported on the copier with the Staple Finisher attached. For information about installing optional finishers, see Printing from Windows or Printing from Mac OS. Off: Disables the stapler. Top Left Corner: The job is stapled with one staple along one corner of the left page edge. Top Right Corner: The job is stapled with one staple along one corner of the right page edge. Left 2 Position: The job is stapled with two staples along the left side page edge. Right 2 Position: The job is stapled with two staples along the right side page edge. Top 2 Position: The job is stapled with two staples along the top side page edge. Center: The job is printed like a booklet with staples in the center of the page. Top Left Corner Top Right Corner Left 2 Position Right 2 Position Top 2 Position Center A A A A A A A When you specify Top Left Corner, Top Right Corner, or Center stapling, you can select a different heavy media (paste board) for the cover pages of your print job.

43 PRINT OPTIONS 43 For limitations on the maximum number of sheets in relation to media weight, refer to the following table: Booklet Finisher Staple Finisher Saddle Stitch Unit Staple position Top Left Corner Top Right Corner Center Top Left Corner Top Right Corner Center 64-74g/m2 50 sheets 20 sheets 50 sheets 50 sheets g/m2 50 sheets 20 sheets 50 sheets 50 sheets g/m2 30 sheets 16 sheets 50 sheets 30 sheets g/m2 20 sheets N/A 50 sheets 20 sheets g/m2 20 sheets N/A 40 sheets 15 sheets g/m2 20 sheets N/A 25 sheets 10 sheets g/m2 N/A N/A 25 sheets 5 sheets g/m2 N/A N/A N/A N/A NOTE: The Booklet Finisher supports cover media (front and back) up to 209 g/m2. The Staple Finisher and Saddle Stitch Unit support cover media (front and back) up to 256 g/m2.

44 PRINT OPTIONS 44 Text Thinning/Reversed Text Enhancement When Text Thinning/Reversed Text Enhancement is set to On, the copier performs a reversed text enhancement that slims and defines text with outline. Select On to sharpen the contrast of thin text printed against a color or black-and-white background. Text Thinning/Reversed Text Enhancement OFF Text Thinning/Reversed Text Enhancement ON NOTE: In general, if white text against dark background, thin text will become bolder. Text Thinning/Reversed Text Enhancement OFF Text Thinning/Reversed Text Enhancement ON Gray Text Outlining When Gray Text Outlining is set to On, the copier adds a gray-text outline to the edge of halftone text and graphics to reduce appearance of jagged edges. Gray Text Outlining OFF Gray Text Outlining ON Text/Graphics Smoothing When Text/Graphics Smoothing is set to On, the Fiery X3eTY2 smooths the edges of text and graphics to reduce appearance of jagged edges. Text/Graphics Smoothing OFF Text/Graphics Smoothing ON