DX CH DMX Dimmer Pack User Manual

Transcription

1 DX CH DMX Dimmer Pack User Manual Lite Puter Enterprise Co., Ltd. Website: sales@liteputer.com.tw

2 Index Introduction... - Feature Specification... - Front Panel & Rear Panel Wiring Operation Standard DMX52 Signal DMX Start Channel Address Setting Dimming / Switch Mode Setting Warm Up Setting (0 6%) Channel Output Status Review Channel Switch DMX Status & DMX Address... 7 Limited Warranty

3 88 8 ISO 900 CERTIFIED Introduction - Feature Max. 4A per channel, total 5A. DMX 52 signal. 'C' dimming curve. 256 steps dimming resolution. DMX start channel address setting. Channel output status preview function. Auto frequency tracking function. Warm up setting 0---6%. Automatic warm up function to protect loads and extend the life of fixture. -2 Specification Power: AC 00-20V, AC V, 45-6Hz, 2 input Output: Maximum 4A per channel, total 5A Signal input/ output: DMX52/ 990 Signal connector: XLR Pin, 6P4C, RJ phone jack Installation: TRUSS hanging or desktop operation. Weight:.2 Kg Fuse: PCB No.:JI25B F(Tube fuse,0.5a,250v) Dimension: 240(W)*88(H)*20(D)mm 20 DX-404 4CH. DMX DIMMER PACK ON FCN DMX CONTROL OFF

4 ISO 900 CERTIFIED - Front Panel & Rear Panel DX-404 4CH. DMX DIMMER PACK ON FCN DMX CONTROL OFF F U S E F U S E F U S E F U S E 2 CH-4 CH- CH-2 CH F U S E F U S E F U S E F U S E 2 CH-4 CH- CH-2 CH

5 Front Panel Introduction. Power switch 2. CH.. CH CH. 5. CH LED display 7. Function key 8. Pad Rear Panel Introduction 9. AC power input 5A 0. America socket: CH- CH-4, AC 00-20V EEC socket: CH- CH-4, AC V. DMX signal input (6P4C Phone jack) 2. DMX signal input ( PIN Cannon plug). DMX signal output ( PIN Cannon plug) 4. Trip type circuit breaker, 8A MAX -4 Wiring The wire & connectors used must follow the local government and other applicable rules and electrical regulations! 2 AWG: 20A 4 AWG: 5A 6 AWG: A 8 AWG: 0A 5

6 2 Operation 2- Standard DMX52 Signal This point is blinking when receiving DMX. 2-2 DMX Start Channel Address Setting STEP- Hold DMX and press or to set the start channel address. : move address forward : up to Channel 52 : move address backward :down to Channel DX-404 is a 4 channels dimmer pack, when the start channel address set: as d.00, the output is from Channel Channel 4. as d.005, the output is from Channel 5 Channel 8. It is allowed that more than piece of DX-404 can set as the same start channel address. 2- Dimming / Switch Mode Setting STEP- Press DMX enter into the DMX status. STEP-2 Hold FCN for sec. Default setting:all channel are set as dimming mode STEP- Press FCN to select the channel no.. STEP-4 Press or to select dimming mode or switch mode. 6

7 (Dimming) (Switch) 2-4 Warm Up Setting (0 6%) STEP- Press FCN enter into the setting. STEP-2 Press FCN to select the channel no., EX : select channel STEP- Press or to adjust the warm up value. Channel s warm up value is 6%. 2-5 Channel Output Status Review STEP- Press DMX enter into the DMX status. STEP-2 press or to preview the channel status(dimming value). FL means the dimming value is 00%. 2-6 Channel Switch STEP- Press blue key CH- ~ CH-4 to switch on channel to DMX Status & DMX Address A.Press DMX enter into DMX status. B.If the device s unused for 0 minutes, it will go to DMX status. 7

8 Limited Warranty. is only responsible for the product itself. 2. guarantees to keep s from manufacturing defects within a year since the distributing date.. does not offer on-site service. If the defects appears In s product, please deliver the product to local distributors or to Taipei headquarters. 4. The warranty does not cover: a. Any fault caused by false usage, imprudence (collision, inadequate installation or adjustment, insufficient ventilation, or improper repairs) b. Force majeure factors (flooding, earthquake, thunder,volcanic eruption, tsunami or other factors beyond control). c. The cost of installing, reinstalling, adjusting, repairing, or reprogramming the product. d. Other products or devices which are offered by or not by. 5. does not warrant the product will operate without interruption or being free of error. Version D Revision Record Record Add detail information Issued on: June, 20 8

9 World Headquarter: Lite Puter Enterprise Co., Ltd. Address: F, No. 89, Gangqian Rd., Neihu Dist., Taipei City, Taiwan Zip Code: 494 Tel: Fax: Website: Shanghai Factory: Lite Puter Technology (Shanghai) Co., Ltd. Address: Building B5, No. 298, Lane 509, Hongmei S. Road, Shanghai, China Zip Code: 2008 Tel: Fax: Shanghai Sales Center: Address: Room 70, Building Gem, No. 487, Tianlin Road, Shanghai, China Zip Code: 200 Tel: / Fax: Website: 9