DIGITAL DMX 4+12CH CHASER/ DIMMER CONSOLE WITH STROBE CONTROL

Transcription

1 DIGITAL DMX +CH CHASER/ DIMMER CONSOLE WITH CONTROL CHASER PLUS AX-5 VERSION.0 USER MANUAL AX-5 [EUM-D]

2 AX-5 CHASER PLUS OPERATION SET-UP Connect a 5pin mic cable from the AX-5 Digital DMX output to the DMX input on a DMX dimmer. A total of extra channels can be extended onto the AX-5. (CH ~CH + (CH)) (NC.) 5 (NC.) (GND) ( R-) (R+) PATCH+ (CH) All extended dimmers must be connected to the AX-5 through patch. To enter patch, press the pause/patch button. Then select the patch page (#~) desired to operate: PATCH # = CH ~ + (CH) PATCH # = CH ~ + (CH) PATCH # = CH5 ~ + (CH) PATCH # = CH ~ + (CH) EXAMPLE step # press pause/patch key step # press # key button ( led will show that the patch is now set at #) CHASE After turning power on, the initial program is 0 (full on). To start a chase program, There are a 0 chase programs, each with steps, and speed levels to choose. push the number relating to the chase program desired, see CHASE PROGRAMS." To change the chase speed, first push the speed (SP) button. When the speed LED indicator light is on, increase or decrease the speed accordingly (0~). Speed readout automatically returns back to chase program # after seconds. There is an automatic speed memory when the machine is turned on again.. The chaser can either operate the individual channels with on/off or with fade-in/ fadeout. The FADE button changes the chaser from one mode to the other. In normal operation, the chaser operates in an on/off mode ( FADE indicator light is off). When the FADE light is on, the chaser operates in a fade-in/ fade-out mode. AUDIO There is a built-in mic in the AX-5. If a direct line is desired, connect a line from the audio source to the Line in in the back of the AX-5, then push the audio (AU) button. When the audio LED indicator light is on, the chase speed is then controlled by the audio signals. AX-5 [EUM-D]

3 AX-5 CHASER PLUS FRONT / REAR PANAL DESCRIPTION POWER DIGITAL CHASE BACKGROUND BI-DIR AUDIO SPEED FADE PAUSE MASTER CHASER PLUS+ 5 PAUSE/ PATCH 0 BI-DIR B FADE ON SPEED/ AUDIO AX-5 + CHANNEL CHASE FULL ON LINE INPUT 00mv 0~0V SYNC OUT POWER INPUT CH- CH- CH- CH- OUTPUT PULSE A PHASE 0A PER CH. MAX A. USE ONLY THE RIGHT SIZE OF POWER CABLE IN RELATION TO MAX AC OUTPUT. B 0~0V AX-5 [EUM-D]

4 AX-5 CHASER PLUS FRONT / REAR PANEL DESCRIPTION. INDICATION LIGHT. LEVEL SLIDE CONTROLLER FUNCTIONS; depending on switch on back panel a. pulse cycle speed ( all LITE PUTER strobes use pulse) b. voltage level; 0~0v. : remains on until pressed again.. : remains on only when pressed. 5. CHANNEL LIGHT INDICATOR. CHANNEL LEVEL SLIDE CONTROLLER. CHANNEL : remains on until button is released.. CHANNEL : remains on until button is pressed again. CHASE INDICATION LIGHT 0. CHASE DIMMING LEVEL SLIDE CONTROLLER. CHASE BUTTON. BACKGROUND DIMMING LEVEL SLIDE CONTROLLER. BACKGROUND INDICATION LIGHT. PAUSE / PATCH BUTTON 5. # BUTTONS. BI-DIR (AUTO REVERSE) BUTTON (check indication lights). FULL ON BUTTON. POWER SWITCH. MASTER CONTROL INDICATION LIGHTS 0. FADE BUTTON. MASTER LEVEL SLIDE CONTROLLER. SPEED / AUDIO SELECTION BUTTON (check indication lights for selection mode). INCREASE BUTTON. DECREASE BUTTON 5. AUDIO LINE OUTPUT 00mV. SYNC. OUTPUT 0 ~ 0V. POWER INPUT. POWER / RESET CIRCUIT BREAKERS. POWER OUTPUT SOCKETS 0. SELECTION a. Pulse cycle b. Voltage 0~0v. SIGNAL OUTPUT (Sends signal to extended dimmers, see patch) AX-5 [EUM-D]

5 AX-5 CHASER PLUS TECHNICAL SPECIFICATIONS POWER INPUT...0V AC / 50~0Hz / 0.5A AUDIO INPUT SIGNAL...00mV (phono jack connector) DMX CONNECTOR...XLR 5 -pin socket DMX SIGNAL CABLE...Standard XLR mic. cable DMX DISTANCE...00M. max DIMENSION... 5U rack size mm(w) x 5mm(h) x 0mm(d) NET WEIGHT...kg MAINTENANCE Guarantee is void if improperly connected. Internal repairs to be done by a professional technician CHASE PROGRAMS LITE-PUTER ENTERPRISE CO., LTD. P.O.BOX - HSI-CHIH. TAIPEI HSIEN TAIWAN, R.O.C. sales@.liteputer.com.tw INTERNET: AX-5 [EUM-D]