ACSEI configuration commands
|
|
- Silvester Griffin
- 5 years ago
- Views:
Transcription
1 Contents ACSEI configuration commands 1 acsei client reboot 1 acsei server 1 acsei server enable 2 acsei timer clock-sync 2 acsei timer monitor 3 display acsei client info 3 display acsei client summary 5 i
2 ACSEI configuration commands acsei client reboot acsei client reboot client-id ACSEI server view client-id: ID of the ACSEI client to be restarted. Use the acsei client reboot command to restart the specified ACSEI client. # Restart ACSEI client 1. [Sysname-acsei-server] acsei client reboot 1 acsei server acsei server System view None Use the acsei server command to enter ACSEI server view. NOTE: You can use the acsei server command to enter ACSEI server view only when you enable the ACSEI server function with the acsei server enable command. # Enter ACSEI server view. 1
3 [Sysname-acsei-server] acsei server enable acsei server enable undo acsei server enable System view None Use the acsei server enable command to enable ACSEI server. Use the undo acsei server enable command to disable ACSEI server. By default, ACSEI server is disabled. # Enable ACSEI server. enable acsei timer clock-sync acsei timer clock-sync minutes undo acsei timer clock-sync ACSEI server view minutes: Value of the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client. It ranges from 0 to 1440 (in minutes), where value 0 disables the clock synchronization from ACSEI server to ACSEI client. Use the acsei timer clock-sync command to set the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client. Use the undo acsei timer clock-sync command to restore the default. 2
4 By default, the clock sychronization timer is set to five minutes. # Set the clock synchronization timer from ACSEI server to ACSEI client to 20 minutes. [Sysname-acsei-server] acsei timer clock-sync 20 acsei timer monitor acsei timer monitor seconds undo acsei timer monitor ACSEI server view seconds: Value of the monitoring timer that is used for ACSEI server to monitor ACSEI clients. It ranges from 0 to 10 (in seconds), where 0 disables ACSEI server from monitoring ACSEI client. Use the acsei timer monitor command to set the monitoring timer for ACSEI server to monitor ACSEI client. Use the undo acsei timer monitor command to restore the default. By default, the monitoring timer is set to 5 seconds. # Set the monitor timer for ACSEI server to monitor ACSEI client to 6 seconds. [Sysname-acsei-server] acsei timer monitor 6 display acsei client info Any view display acsei client info [ client-id ] [ { begin exclude include } regular-expression ] 1: Monitor level client-id: ID of an ACSEI client. 3
5 : Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Use the display acsei client info command to display the ACSEI client information. The client information is retrieved from the advertisement packet sent by the client, so that when there is no ACSEI client information, the command displays the information keywords only. If executed without the client-id argument, the command displays information about all the ACSEI clients in order of registration time. # Display information about ACSEI client 1. <Sysname> display acsei client info 1 client ID: 1 client : Intrusion Prevention System Hardware: 2.0 System Software: i-ware software, Version 1.10 Application Software: Ess 2111 CPU: RMI XLR732 PCB Version: Ver.A CPLD Version: 2.0 Bootrom Version: 1.28 CF card: 247MB Memory: 1993MB Harddisk: 0MB # Display information about all ACSEI clients. <Sysname> display acsei client info Total client Number: 1 client ID: 1 client : Intrusion Prevention System Hardware: 2.0 System Software: i-ware software, Version 1.10 Application Software: Ess 2111 CPU: RMI XLR732 PCB Version: Ver.A CPLD Version: 2.0 Bootrom Version: 1.28 CF card: 247MB Memory: 1993MB Harddisk: 0MB 4
6 Table 1 Output description Field client ID client Hardware System Software Application Software CPU PCB Version CPLD Version Bootrom Version CF card Memory Harddisk ID of the ACSEI client ACSEI client description Hardware version of the ACSEI client System software name and version of the ACSEI client Application name and version of the ACSEI client CPU information of the ACSEI client PCB version of the ACSEI client CPLD version of the ACSEI client Boot ROM version of the ACSEI client CF card information of the ACSEI client Memory information of the ACSEI client Harddisk information of the ACSEI client display acsei client summary display acsei client summary [ client-id ] [ { begin exclude include } regular-expression ] Any view 1: Monitor level client-id: ID of an ACSEI client whose summary is to be displayed. : Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Use the display acsei client summary command to display ACSEI client summary information. Summary information of multiple ACSEI clients is displayed in order of registration time. If executed without the client-id argument, the command displays summary information about all the ACSEI clients. 5
7 # Display the summary of all ACSEI clients. <Sysname> display acsei client summary Total client Number: 1 client ID: 1 Status: Open MAC Address: 3ce5-a604-d100 Interface: Ten-GigabitEthernet4/0/1 Last registered: 08/20/ :36:54 Table 2 Output description Field client ID Status MAC Address Interface Last registered ID of the ACSEI client ACSEI client status MAC address of the ACSEI client Interface carrying the ACSEI client The last registration time of the ACSEI client 6
Loopback detection configuration commands
Contents Loopback detection configuration commands 1 display loopback-detection 1 loopback-detection action 2 loopback-detection enable 2 loopback-detection interval-time 3 i Loopback detection configuration
More informationH3C S5820X&S5800 Switch Series
H3C S5820X&S5800 Switch Series OAA Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 1211 Document version: 6W100-20110415 Copyright 2011, Hangzhou H3C
More informationLoop detection commands 1
Contents Loop detection commands 1 display loopback-detection 1 loopback-detection action 1 loopback-detection enable 2 loopback-detection global action 3 loopback-detection global enable 4 loopback-detection
More informationCommand Manual MAC Address Table Management H3C S5500-EI Series Ethernet Switches. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 MAC Address Table Management... 1-1 1.1.1 display mac-address... 1-1 1.1.2 display mac-address aging-time... 1-2 1.1.3 mac-address (Ethernet port view)...
More informationHP A5120 EI Switch Series IRF. Command Reference. Abstract
HP A5120 EI Switch Series IRF Command Reference Abstract This document describes the commands and command syntax options available for the HP A Series products. This document is intended for network planners,
More informationGVRP configuration commands
Contents GVRP configuration commands 1 display garp statistics 1 display garp timer 2 display gvrp local-vlan 3 display gvrp state 3 display gvrp statistics 5 display gvrp status 6 display gvrp vlan-operation
More informationARP attack protection commands
Contents ARP attack protection commands 1 Unresolvable IP attack protection commands 1 arp resolving-route enable 1 arp source-suppression enable 1 arp source-suppression limit 2 display arp source-suppression
More informationHP 5820X & 5800 Switch Series IRF. Command Reference. Abstract
HP 5820X & 5800 Switch Series IRF Command Reference Abstract This document describes the commands and command syntax options available for the HP 5820X & 5800 Series products. This document is intended
More informationCommand Manual QinQ-BPDU TUNNEL H3C S5500-SI Series Ethernet Switches. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 QinQ Configuration Commands... 1-1 1.1.1 qinq enable... 1-1 1.1.2 qinq ethernet-type... 1-2 1.1.3 qinq vid... 1-2 1.1.4 raw-vlan-id inbound... 1-3 Chapter
More informationPPP configuration commands
Contents PPP configuration commands 1 ip address ppp-negotiate 1 ip pool 1 link-protocol ppp 2 ppp authentication-mode 2 ppp chap password 4 ppp chap user 5 ppp ipcp remote-address forced 5 ppp pap local-user
More informationPortal configuration commands
Contents Portal configuration commands 1 display portal acl 1 display portal connection statistics 5 display portal free-rule 7 display portal interface 9 display portal-roaming 11 display portal server
More informationHP 5920 & 5900 Switch Series
HP 5920 & 5900 Switch Series IRF Command Reference Part number: 5998-2881 Software version: Release2207 Document version: 6W100-20121130 Legal and notice information Copyright 2012 Hewlett-Packard Development
More informationUpgrading software. Router software overview. Software upgrade configuration task list
Contents Upgrading software 1 Router software overview 1 Software upgrade configuration task list 1 Upgrading system software from BootWare menu 2 BootWare main menu 2 BootWare submenus 3 Using TFTP/FTP
More informationH3C SecBlade NetStream Card Configuration Examples
H3C SecBlade NetStream Card Configuration Examples Copyright 2012 Hangzhou H3C Technologies Co., Ltd. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any
More informationOperation Manual ARP H3C S5500-SI Series Ethernet Switches. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 ARP Overview... 1-1 1.1.1 ARP Function... 1-1 1.1.2 ARP Message Format... 1-1 1.1.3 ARP Address Resolution Process... 1-2 1.1.4 ARP Mapping Table... 1-3 1.2
More informationOperation Manual Cluster Management. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 HGMP V1 Over... 1-1 1.2 HGMP Server Configuration... 1-2 1.2.1 Enabling HGMP Server on a Management Device... 1-2 1.2.2 Upgrading Software on a Switch through
More informationHP FlexFabric 5700 Switch Series
HP FlexFabric 5700 Switch Series IRF Command Reference Part number: 5998-6683 Software version: Release 2416 Document version: 6W100-20150130 Legal and notice information Copyright 2015 Hewlett-Packard
More informationH3C SecBlade IPS Cards
H3C SecBlade IPS Cards User Manual Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document version: 5PW104-20101210 Copyright 2008-2010, Hangzhou H3C Technologies Co., Ltd. and its licensors All
More informationSoftware Upgrade Guide
Contents Software Upgrade Guide 1 Files used for upgrade 1 Upgrade methods 1 Upgrade from the CLI 2 Upgrading a standalone switch 2 Upgrading an IRF fabric 7 Upgrade from the BootWare menu 13 BootWare
More informationTable of Contents 1 Basic Configuration Commands 1-1
Table of Contents 1 Basic Configuration Commands 1-1 Basic Configuration Commands 1-1 clock datetime 1-1 clock summer-time one-off 1-2 clock summer-time repeating 1-3 clock timezone 1-4 configure-user
More informationH3C S5120-EI Switch Series
H3C S5120-EI Switch Series IP Multicast Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 2210 Document version: 6W100-20110915 Copyright 2011, Hangzhou
More informationOperation Manual System Management. Table of Contents
Table of Contents Table of Contents Chapter 1 File System Management... 1-1 1.1 File System Configuration... 1-1 1.1.1 File System Overview... 1-1 1.1.2 Directory... 1-1 1.1.3 File... 1-2 1.1.4 Storage
More informationS12700 Agile Switches CSS2 Introduction
S12700 Agile Switches CSS2 Introduction www.huawei.com Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved. Preface With the gradual increase of the amount of data access and network reliability
More informationTable of Contents Chapter 1 Configuration File Management Commands
Table of Contents Table of Contents... 1-1 1.1.1 display current-configuration... 1-1 1.1.2 display saved-configuration... 1-6 1.1.3 display this... 1-7 1.1.4 display startup... 1-8 1.1.5 reset saved-configuration...
More informationConfiguring BPDU tunneling
Contents Configuring BPDU tunneling 1 Introduction to BPDU tunneling 1 Background 1 BPDU Tunneling implementation 2 Configuring BPDU tunneling 3 Configuration prerequisites 3 Enabling BPDU tunneling for
More informationContents. FCoE commands 0
Contents FCoE commands 0 FCoE mode commands 0 display fcoe-mode 0 fcoe-mode 0 VFC interface commands 2 bandwidth 2 bind interface 2 default 3 description 4 display interface vfc 5 fc mode 8 interface vfc
More informationHP 3600 v2 Switch Series
HP 3600 v2 Switch Series IRF Configuration Guide Part number: 5998-2349a Software version: Release 2108P01 Document version: 6W100-20131130 Legal and notice information Copyright 2013 Hewlett-Packard Development
More informationTable of Contents 1 WLAN Security Configuration Commands 1-1
Table of Contents 1 WLAN Security Configuration Commands 1-1 authentication-method 1-1 cipher-suite 1-2 gtk-rekey client-offline enable 1-2 gtk-rekey enable 1-3 gtk-rekey method 1-4 ptk-lifetime 1-5 security-ie
More informationTable of Contents. 1 TFTP Configuration Commands 1-1 TFTP Client Configuration Commands 1-1 tftp-server acl 1-1 tftp 1-2 tftp ipv6 1-3
Table of Contents 1 TFTP Configuration Commands 1-1 TFTP Client Configuration Commands 1-1 tftp-server acl 1-1 tftp 1-2 tftp ipv6 1-3 i 1 TFTP Configuration Commands TFTP Client Configuration Commands
More informationH3C Intrusion Prevention System. Command Reference. Hangzhou H3C Technologies Co., Ltd. Document Version: 5PW
H3C Intrusion Prevention System Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document Version: 5PW103-20101027 Copyright 2008-2010, Hangzhou H3C Technologies Co., Ltd. and its
More informationTable of Contents. 2 MIB Configuration Commands 2-1 MIB Configuration Commands 2-1 display mib-style 2-1 mib-style 2-1
Table of Contents 1 SNMP Configuration Commands 1-1 SNMP Configuration Commands 1-1 display snmp-agent community 1-1 display snmp-agent group 1-2 display snmp-agent local-engineid 1-3 display snmp-agent
More informationContents. TFTP configuration commands 29 display tftp client configuration 29 tftp-server acl 29 tftp 30 tftp client source 32 tftp ipv6 33
Contents FTP configuration commands 1 FTP server configuration commands 1 display ftp-server 1 display ftp-user 2 free ftp user 3 ftp server acl 3 ftp server enable 4 ftp timeout 5 ftp update 5 FTP client
More informationEthernet Interface Configuration Commands
Table of Contents Ethernet Interface Configuration Commands 1 General Ethernet Interface/Subinterface Configuration Commands 1 combo enable 1 description 1 display interface 2 display interface brief 9
More informationHP 5130 EI Switch Series
HP 5130 EI Switch Series IRF Command Reference Part number: 5998-5478a Software version: Release 31xx Document version: 6W100-20150731 Legal and notice information Copyright 2015 Hewlett-Packard Development
More informationHP 5500 EI & 5500 SI Switch Series
HP 5500 EI & 5500 SI Switch Series Fundamentals Configuration Guide Part number: 5998-1707 Software version: Release 2220 Document version: 6W100-20130810 Legal and notice information Copyright 2013 Hewlett-Packard
More informationVPLS configuration commands
Contents VPLS configuration commands 1 car 1 description 1 display bgp vpls 2 display l2vpn fast-switch-group 7 display mac-address vsi 8 display mpls l2vpn fib ac vpls 10 display mpls l2vpn fib pw vpls
More informationTable of Contents 1 Basic Configuration Commands 1-1
Table of Contents 1 Basic Configuration Commands 1-1 Basic Configuration Commands 1-1 clock datetime 1-1 clock summer-time one-off 1-1 clock summer-time repeating 1-2 clock timezone 1-4 command-privilege
More informationEthernet Interface Configuration Commands
Table of Contents Ethernet Interface Configuration Commands 1 General Ethernet Interface/Subinterface Configuration Commands 1 combo enable 1 description 1 display interface 2 display interface brief 9
More informationRWL Tech Note A5500 IRF
A5500 IRF Prepared by Richard Litchfield HP Networking Solution Architect Hewlett-Packard Australia Limited 410 Concord Road Rhodes NSW 2138 Date Prepared: 20-Nov-10 Document Information Document Version
More informationH3C SecPath Series Firewalls and UTM Devices
H3C SecPath Series Firewalls and UTM Devices High Availability Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: F100 series: ESS 5132 F1000-A-EI: Feature 3722
More informationH3C SecPath Series High-End Firewalls
H3C SecPath Series High-End Firewalls Attack Protection Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: SECPATHF1000SAI&F1000AEI&F1000ESI-CMW520-R3721 SECPATH5000FA-CMW520-F3210
More informationTable of Contents 1 Ethernet Interface Configuration Commands 1-1
Table of Contents 1 Ethernet Interface Configuration Commands 1-1 broadcast-suppression 1-1 description 1-2 display brief interface 1-3 display interface 1-4 display loopback-detection 1-8 duplex 1-9 flow-control
More informationCommand Manual Network Protocol. Table of Contents
Table of Contents Table of Contents Chapter 1 IP Address Configuration Commands... 1-1 1.1 IP Address Configuration Commands... 1-1 1.1.1 display ip host... 1-1 1.1.2 display ip interface... 1-1 1.1.3
More informationLogin management commands
Contents Login management commands 1 CLI login configuration commands 1 display telnet client configuration 1 telnet 1 telnet ipv6 2 telnet server enable 3 User interface configuration commands 3 acl (user
More informationEthernet interface commands
Contents Ethernet interface commands 1 Common Ethernet interface commands 1 default 1 description 2 display counters 2 display counters rate 4 display interface 5 display interface brief 12 display packet-drop
More informationFACULTY OF ENGINEERING. Lab Experiment
FACULTY OF ENGINEERING ECE2056 Data Communications and Networking Lab Experiment DCN1: Network Setup and Study Using Routers Last revised: 20-11- 2015 Revised by: GVT Learning Outcome: Pre- Requisite:
More informationSecBlade Firewall Cards Stateful Failover Configuration Examples
SecBlade Firewall Cards Stateful Failover Configuration Examples Keywords: Stateful failover, active/standby mode, active/active mode, data synchronization, traffic switchover Abstract: A network that
More informationTable of Contents. 2 MIB Configuration Commands 2-1 display mib-style 2-1 mib-style 2-1
Table of Contents 1 SNMP Configuration Commands 1-1 SNMP Configuration Commands 1-1 display snmp-agent community 1-1 display snmp-agent group 1-2 display snmp-agent local-engineid 1-3 display snmp-agent
More informationHP 5500 HI Switch Series
HP 5500 HI Switch Series IRF Configuration Guide Part number: 5998-2376a Software version: Release 5203 and Release 5206 Document version: 6W102-20140228 Legal and notice information Copyright 2014 Hewlett-Packard
More informationConfiguring PTP. Information About PTP. This chapter contains the following sections:
This chapter contains the following sections: Information About PTP Information About PTP, on page 1 PTP Device Types, on page 2 PTP Process, on page 3 High Availability for PTP, on page 3 Licensing Requirements
More informationVPLS configuration commands
Contents VPLS configuration commands 1 car 1 description 1 display bgp vpls 2 display l2vpn fast-switch-group 7 display mac-address vsi 8 display mpls l2vpn fib ac vpls 9 display mpls l2vpn fib pw vpls
More informationTable of Contents 1 Basic Configuration Commands 1-1
Table of Contents 1 Basic Configuration Commands 1-1 Basic Configuration Commands 1-1 clock datetime 1-1 clock summer-time one-off 1-2 clock summer-time repeating 1-3 clock timezone 1-4 command-privilege
More informationH3C SR6600 Routers DVPN Configuration Example
H3C SR6600 Routers DVPN Configuration Example Keywords: DVPN, VPN, VAM, AAA, IPsec, GRE Abstract: This document describes the DVPN configuration example for the H3C SR6600 Routers Series. Acronyms: Acronym
More informationH3C SR G Core Routers
H3C SR8800 10G Core Routers IP Multicast Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: SR8800-CMW520-R3347 Document version: 6W103-20120224 Copyright 2011-2012,
More informationDevice management commands 1
Contents Device management commands 1 clock datetime 1 clock protocol 2 clock summer-time 2 clock timezone 4 command 5 copyright-info enable 6 display alarm 7 display asset-info 8 display clock 10 display
More informationConfiguring Virtual Blades
CHAPTER 14 This chapter describes how to configure virtual blades, which are computer emulators that reside in a WAE or WAVE device. A virtual blade allows you to allocate WAE system resources for use
More informationH3C S5500-HI Switch Series
H3C S5500-HI Switch Series IP Multicast Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 5101 Document version: 6W100-20111031 Copyright 2011, Hangzhou
More informationIP performance optimization
Contents IP performance optimization 1 display icmp statistics 1 display ip socket 2 display ip statistics 6 display tcp statistics 8 display udp statistics 10 ip forward-broadcast 11 ip icmp flow-control
More informationHP FlexFabric 5700 Switch Series
HP FlexFabric 5700 Switch Series FCoE Command Reference Part number: 5998-6675 Software version: Release 2416 Document version: 6W100-20150130 Legal and notice information Copyright 2015 Hewlett-Packard
More informationH3C S7500E Series Ethernet Switches. IP Multicast. Command Reference. Hangzhou H3C Technologies Co., Ltd.
H3C S7500E Series Ethernet Switches IP Multicast Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document Version: 20100930-C-1.01 Product Version: Release 6613 and Later Copyright
More informationCommand Manual (For Soliton) VLAN-VPN. Table of Contents
Table of Contents Table of Contents Chapter 1 VLAN-VPN Configuration Commands... 1-1 1.1 VLAN-VPN Configuration Commands... 1-1 1.1.1 display port vlan-vpn... 1-1 1.1.2 vlan-vpn enable... 1-2 1.1.3 vlan-vpn
More informationH3C S9500E Series Routing Switches
H3C S9500E Series Routing Switches IP Multicast Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: S9500E-CMW520-R1828P04 Document version: 6W182-20140823 Copyright
More informationVPLS configuration commands
Contents VPLS configuration commands 1 bandwidth 1 broadcast-restrain 1 description 2 display bgp vpls 3 display l2vpn fast-switch-group 8 display mac-address vsi 9 display mpls l2vpn fib ac vpls 10 display
More informationEthernet interface configuration commands
Contents Ethernet interface configuration commands 1 General Ethernet interface/subinterface configuration commands 1 combo enable 1 default 1 description 2 display counters 3 display counters rate 4 display
More informationSoftware Package Management Commands on the Cisco ASR 9000 Series Router
Software Package Management Commands on the Cisco ASR 9000 Series Router This chapter describes the Cisco IOS XR commands used to add packages to a router storage device, activate or deactivate packages,
More informationSoftware Package Management Commands on the Cisco ASR 9000 Series Router
Software Package Management Commands on the Cisco ASR 9000 Series Router This chapter describes the Cisco IOS XR commands used to add packages to a router storage device, activate or deactivate packages,
More informationH3C SecPath Series Firewalls and UTM Devices
H3C SecPath Series Firewalls and UTM Devices Attack Protection Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: F100 series: ESS 5132 F1000-A-EI: Feature 3722
More informationSoftware Package Management Commands on the Cisco ASR 9000 Series Router
Software Package Management Commands on the Cisco ASR 9000 Series Router This chapter describes the Cisco IOS XR commands used to add packages to a router storage device, activate or deactivate packages,
More informationHP 5820X & 5800 Switch Series IRF. Configuration Guide. Abstract
HP 5820X & 5800 Switch Series IRF Configuration Guide Abstract This document describes the software features for the HP 5820X & 5800 Series products and guides you through the software configuration procedures.
More informationHP 3600 v2 Switch Series
HP 3600 v2 Switch Series Fundamentals Command Reference Part number: 5998-2359 Software version: Release 2101 Document version: 6W101-20130930 Legal and notice information Copyright 2013 Hewlett-Packard
More informationTable of Contents. 2 Static Route Configuration Commands 2-1 Static Route Configuration Commands 2-1 delete static-routes all 2-1 ip route-static 2-1
Table of Contents 1 IP Routing Table Commands 1-1 IP Routing Table Commands 1-1 display ip routing-table 1-1 display ip routing-table acl 1-3 display ip routing-table ip-address 1-5 display ip routing-table
More informationContents. RMON commands 1
Contents RMON commands 1 display rmon alarm 1 display rmon event 2 display rmon eventlog 3 display rmon history 5 display rmon prialarm 7 display rmon statistics 9 rmon alarm 10 rmon event 13 rmon history
More informationHP Load Balancing Module
HP Load Balancing Module System Maintenance Configuration Guide Part number: 5998-4221 Software version: Feature 3221 Document version: 6PW100-20130326 Legal and notice information Copyright 2013 Hewlett-Packard
More informationContents. BGP commands 1
Contents BGP commands 1 address-family ipv4 1 address-family ipv6 2 address-family link-state 3 advertise-rib-active 4 aggregate 5 balance 7 balance as-path-neglect 9 bestroute as-path-neglect 10 bestroute
More informationConfiguring NTP. Information About NTP. Information About the NTP Server. This chapter contains the following sections:
This chapter contains the following sections: Information About NTP Information About NTP, on page 1 Licensing Requirements, on page 3 Prerequisites for NTP, on page 3 Guidelines and Limitations for NTP,
More informationSoftware Package Management Commands
Software Package Management Commands This chapter describes the Cisco IOS XR commands used to add packages to a router storage device, activate or deactivate packages, upgrade or downgrade existing packages,
More informationUpgrading OmniSwitch 9000 Series Switches to R01
032512-10 *032512-10* Rev. A *A* Upgrading OmniSwitch 9000 Series Switches to 6.3.4.R01 Overview This instruction sheet documents how to upgrade OmniSwitch 9000 Series switches to 6.3.4.R01 software and
More informationHP A5830 Switch Series Fundamentals. Configuration Guide. Abstract
HP A5830 Switch Series Fundamentals Configuration Guide Abstract This document describes the software features for the HP A Series products and guides you through the software configuration procedures.
More informationHP 3600 v2 Switch Series
HP 3600 v2 Switch Series Fundamentals Command Reference Part number: 5998-7608 Software version: Release 2110P02 Document version: 6W100-20150305 Legal and notice information Copyright 2015 Hewlett-Packard
More informationTable of Contents 1 PPP Configuration Commands PPPoE Configuration Commands 2-1
Table of Contents 1 PPP Configuration Commands 1-1 PPP Configuration Commands 1-1 ip address ppp-negotiate 1-1 link-protocol ppp 1-2 mtu 1-2 ppp account-statistics enable 1-3 ppp authentication-mode 1-3
More informationtcp ipv6 timer fin-timeout 40 tcp ipv6 timer syn-timeout 40 tcp ipv6 window 41
Table of Contents IPv6 Basics Configuration Commands 1 IPv6 Basics Configuration Commands 1 display ipv6 fib 1 display ipv6 fibcache 2 display ipv6 interface 2 display ipv6 neighbors 5 display ipv6 neighbors
More informationContents. FCoE commands 1
Contents FCoE commands 1 FCoE mode commands 1 display fcoe-mode 1 fcoe-mode 1 VFC interface commands 3 bandwidth 3 bind interface 3 default 5 description 5 display interface vfc 6 fc mode 9 interface vfc
More informationH3C S6800 Switch Series
H3C S6800 Switch Series OpenFlow Command Reference New H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 2609 and later Document version: 6W103-20190104 Copyright 2019, New H3C Technologies
More informationHP 6125 Blade Switch Series
HP 6125 Blade Switch Series Fundamentals Configuration Guide Part number: 5998-3153 Software version: Release 2103 Document version: 6W100-20120907 Legal and notice information Copyright 2012 Hewlett-Packard
More informationH3C WA Series WLAN Access Points. Fundamentals Command Reference
H3C WA Series WLAN Access Points Fundamentals Command Reference Abstract This document details the commands for the WA series WLAN access points. Intended audience includes network planners, field technical
More information2] Chapter 2 Cisco IOS Commands traceroute mac
2] Chapter 2 traceroute mac traceroute mac Use the traceroute mac privileged EXEC command on the switch stack or on a standalone switch to display the Layer 2 path taken by the packets from the specified
More informationHPE FlexFabric 5700 Switch Series
HPE FlexFabric 5700 Switch Series Fundamentals Command Reference Part number: 5998-5600R Software version: Release 2422P01 and later Document version: 6W100-20160331 Copyright 2016 Hewlett Packard Enterprise
More informationSoftware Package Management Commands
Software Package Management Commands This chapter describes the Cisco IOS XR commands used to add packages to a router storage device, activate or deactivate packages, upgrade or downgrade existing packages,
More informationUnderstanding PTP. A network device physically attached to the primary time source. All clocks are synchronized to the grandmaster clock.
The Precision Time Protocol (PTP), as defined in the IEEE 1588 standard, synchronizes with nanosecond accuracy the real-time clocks of the devices in a network. The clocks in are organized into a master-slave
More informationHP MSR Router Series. Fundamentals Command Reference(V7) Part number: Software version: CMW710-R0106 Document version: 6PW
HP MSR Router Series Fundamentals Command Reference(V7) Part number: 5998-6354 Software version: CMW710-R0106 Document version: 6PW101-20140807 Legal and notice information Copyright 2014 Hewlett-Packard
More informationContents. IP addressing configuration commands 1 display ip interface 1 display ip interface brief 3 ip address 5
Contents IP addressing configuration commands 1 display ip interface 1 display ip interface brief 3 ip address 5 i IP addressing configuration commands display ip interface Syntax View Default level Parameters
More informationH3C EPON. OLT Command Manual. Hangzhou H3C Technologies Co., Ltd. Manual Version: T M C-1.02
H3C EPON OLT Command Manual Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Manual Version: T2-08193M-20070415-C-1.02 Product Version: Release 5200 Series Copyright 2006-2007, Hangzhou H3C Technologies
More informationConfiguring MPLS L2VPN
Contents Configuring MPLS L2VPN 1 MPLS L2VPN overview 1 About MPLS L2VPN 1 Comparison with traditional VPN 2 Comparison with MPLS L3VPN 2 Basic concepts 2 MPLS L2VPN implementation 3 MPLS L2VPN configuration
More informationHP 6125G & 6125G/XG Blade Switches
HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration Guide Part number: 5998-3153a Software version: Release 2103 and later Document version: 6W102-20141218 Legal and notice information Copyright
More informationCisco CMX High Availability Commands
cmxha info, page 2 cmxha config, page 4 cmxha secondary, page 6 cmxha events, page 8 cmxha failover, page 9 cmxha failback, page 10 cmxha primary, page 11 cmxha diag, page 12 cmxha filesync, page 13 cmxha
More informationTable of Contents Chapter 1 EPON System Configuration Chapter 2 OLT Configuration Chapter 3 ONU Configuration
Table of Contents Table of Contents Chapter 1 EPON System Configuration... 1-1 1.1 Introduction to EPON System... 1-1 1.2 EPON System Configuration Tasks... 1-2 1.3 Configuring the Interval to Sample System
More informationConfiguring MPLS L2VPN
Contents Configuring MPLS L2VPN 1 Overview 1 Comparison with traditional VPN 1 Comparison with MPLS L3VPN 2 Basic concepts 2 MPLS L2VPN implementation 3 MPLS L2VPN configuration task list 4 Configuring
More informationH3C S9500 Series Routing Switches
Operation Manual Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Manual Version: T2-08165E-20081225-C-1.24 Product Version: S9500-CMW310-R1648 Copyright 2007-2008, Hangzhou H3C Technologies Co.,
More informationContents. TFTP configuration commands 28 display tftp client configuration 28 tftp-server acl 28 tftp 29 tftp client source 30 tftp ipv6 31
Contents FTP configuration commands 1 FTP server configuration commands 1 display ftp-server 1 display ftp-user 2 free ftp user 3 ftp server acl 3 ftp server enable 4 ftp timeout 4 ftp update 5 FTP client
More informationEthernet interface configuration commands
Contents Ethernet interface configuration commands 1 General Ethernet interface and subinterface configuration commands 1 alarm-detect 1 bandwidth 2 combo enable 2 default 3 description 4 display counters
More information