Supplement for Administrator Guide KX-HDV430. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
|
|
- Cordelia Madison Matthews
- 5 years ago
- Views:
Transcription
1 Supplement for Administrator Guide Model o. SIP Phone KX-HDV430 Please use this supplement manual together with the latest English Administrator Guide. Document Version
2 1. Additional Information for Specifying the Server Address 1.1 Basic format Format: name> * The server name (<host>) may be the IP address or the domain. * Maximum length: 384 characters 1.2 Macros used with file names Macro Format {XXXX} Macro Expansion If the URL contains {MAC}, it will be replaced with the {MAC} device s MAC address in uppercase letters. Example: {MAC} 0080F0C571EB If the URL contains {mac}, it will be replaced with the {mac} device s MAC address in lowercase letters. Example: {mac} 0080f0c571eb If the URL contains {MODEL}, it will be replaced with {MODEL} the device s model name. Example: {MODEL} KX-HDV430 If the URL contains {fwver}, it will be replaced with the {fwver} device s firmware version. Example: {fwver} ote Macros distinguish between uppercase and lowercase letters. Macros not specified above will be treated as strings of characters. 1.3 Target WEB Settings/Configuration Parameters WEB Setting Configuration Parameter DHCP Host ame DHCP_HOST_AME Standard File URL CFG_STADARD_FILE_PATH Product File URL CFG_PRODUCT_FILE_PATH Master File URL CFG_MASTER_FILE_PATH - CFG_ROOT_CERTIFICATE_PATH - CFG_CLIET_CERT_PATH - CFG_PKE_PATH Firmware File URL FIRM_FILE_PATH HTTP User Agent HTTP_USER_AGET - XMPP_ROOT_CERT_PATH - XMPP_CLIET_CERT_PATH - XMPP_PKE_PATH - LDAP_ROOT_CERT_PATH - LDAP_CLIET_CERT_PATH - LDAP_PKE_PATH - LAGUAGE_PATHx - WEB_LAGUAGE_PATHx User Agent SIP_USER_AGET - SIP_TLS_ROOT_CERT_PATH - SIP_TLS_CLIET_CERT_PATH - SIP_TLS_PKE_PATH - POWER_O_DISPLA_LOGO_PATH 2. Additional Information for Specifying the LDAP Server Add "ldap://"or "ldaps://" before the LDAP server address. (Example) LDAP_SERVER="ldap:// "
3 KX HDV430 Software File Version or later etwork Status Change the followings in " Setting Mode " on page 61. (Before) (After) Disable LLDP Manual Disable LLDP CDP LLDP/CDP Manual Ethernet Port Settings Add the following WEB setting. Enable CDP Selects whether to enable the CDP feature. es o o CDP_EABLE Packet Interval Specifies the interval, in seconds, between sending CDP frames CDP_ITERVAL Call Control Add the following WEB setting. Group Call Pickup Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) ot stored. UM_PLA_PICKUP_GROUP Barge in Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) ot stored. UM_PLA_BARGE_I
4 Private Hold Selects whether to enable or disable private hold. es o o PRIVATE_HOLD_EABLE Flexible Key Settings (o. 1 24) Change the followings in " Type" on page 129. (Before) (After) One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve etwork Camera One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve Group Call Pickup etwork Camera
5 DSS Console Change the followings in " Type" on page 141. (Before) (After) One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve etwork Camera One Touch Dial BLF Line ACD Wrap Up Line Status Call Forward Phonebook Call History Simultaneous Ring Hoteling (Hospitality) Transfer Blind Transfer Conference Directed Call Pickup Call Park Call Park Retrieve Group Call Pickup etwork Camera
6 System Settings AUTO_IPUT_KE_TIME Specifies the number of seconds after which the cursor automatically moves to the next position during character input. 0 3 [0: off] 0 START_DIAL_POUD_KE Specifies whether to send the dialed number when the '#' key is pressed during pre-dialing. : Enable dialing by using '#' : Disable CALL_SETTIGS_MEU_EABLE Specifies whether the "Call Settings" setting is displayed in MEU. : Displayed : ot displayed LCD_SCREE_TIMEOUT Specifies the length of time before the LCD backlight turns off when the unit is idle. 0: 30sec 1: 1min 2: 5min 3: 10min 4: 30min 5: 60min 6: 120min 7: 180min 8: 300min 9: Always On 1 LCD_ACTIVE_LEVEL Specifies the backlight level of the LCD when it is active
7 LCD_IACTIVE_LEVEL Specifies the backlight level of the LCD when it is inactive. 0: Off 1: Low 0 DSS_LCD_ACTIVATIO Specifies the activation of the backlight of DSS units' LCD. 0: Off 1: On 2: Auto 2 DSS_LCD_BACKLIGHT Specifies the backlight level of DSS units' LCD DSS_LCD_COTRAST Specifies the contrast level of DSS units' LCD DELA_RIG_TIME_n Parameter ame Example DELA_RIG_TIME_1, DELA_RIG_TIME_2,,DELA_RIG_TIME_16 Specifies the length of time, in seconds, until the unit rings : Disable 0 OFF_HOOK_MOITOR_EABLE Specifies whether to enable or disable the Off-hook Monitor function. : Enable Off-hook Monitor : Disable
8 PRIVATE_HOLD_EABLE Specifies whether to enable or disable private hold. : Enable private hold : Disable Private Hold COF_OWER_OUT_EABLE Specifies whether to allow the remaining two parties in a three-party conference to continue the conversation if the conference originator leaves the conference call (Unattended Conference). : Enable Unattended Conference : Disable PCAP_EABLE Specifies whether to enable or disable packet capturing using the Wireshark utility (PCAP Remote). : Enable PCAP Remote : Disable PCAP_REMOTE_ID STRIG Specifies the ID of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote) characters Empty string PCAP_REMOTE_PASS STRIG Specifies the password of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote). 0, 6 64 characters Empty string PCAP_REMOTE_PORT Specifies the port of the IP phone to use for capturing packets using the Wireshark utility (PCAP Remote)
9 DTMF_OUT_EABLE Specifies whether received outband DTMF signals are output audibly. : Enable audible outband DTMF : Disable CACEL_OPERATIO_MODE Specifies the operation of the [CACEL] button when a line is in use. 0: Cancel the current operation 1: Return to standby mode Ethernet Port Settings CDP_EABLE Specifies whether to enable the CDP feature. : Enable CDP : Disable Enable CDP CDP_ITERVAL Specifies the interval, in seconds, between sending each CDP frames Packet Interval XML Settings XML_PHOEBOOK_URL STRIG Specifies the URL to download the XML phonebook file from. Max.256 characters Empty string
10 XML_PHOEBOOK_CCLIC_ITVL Specifies the interval, in minutes, between periodic checks for updates to the XML phonebook. If this parameter is set to "0", the timing is the same as that for updating the configuration files. 0, XML_CURSOR_SKIP_EABLE Selects whether to skip displaying the cursor on line 1 (id=1) of the display on the XML menu. : Enable skipping the cursor display on line 1 (id=1) : Disable XMLAPP_URL_REDIAL_KE STRIG When the redial key is defined by an XML element, specifies the URL that is accessed when the [REDIAL] key is pressed. Max.256 characters (The ampersand [&] character is available) Empty string Call Center Settings UC_HOTELIG_MODE Specifies the Flexible Seating mode. This service allows a guest to use the host's device as his own. 0: Hoteling not supported 1: Hoteling supported 2: Host 3: Guest 0 UC_FLEXIBLESEATIG_ULOCKPI STRIG Specifies the unlock PI for Flexible Seating digits Empty string
11 SIP Settings SIP_183_TALK_EABLE Specifies whether the unit's sate is "Talking" or "Calling" when it receives a SIP 183 message. : Talking : Calling SRTP Settings DISPLA_SRTP_CALL_EABLE Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP). : Display an icon for encrypted calls : Disable VQ Report by PUBLISH VQREPORT_SED_OPT_CODEC_EABLE Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when the codec is changed. : Send VQREPORT when a change of codec is detected : Send VQREPORT at the end of a conversation VQREPORT_SED_OPT_W_CHAGE Specifies the number of consecutive times the MOS (Mean Opinion Score) value may fall below the threshold value specified by either ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG before the phone sends VQREPORT. The ALERT_REPORT_TRIGGER setting determines whether ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG is used as the threshold. 0 5 (The number of consecutive times. 0:Disable) ote If "2" is specified and the MOS value falls within the threshold 2 consecutive times, VQREPORT is sent. 0
12 Telephone Settings UM_PLA_PICKUP_GROUP STRIG Specifies the feature number for performing group call pickup. 0 4 digits (0 9, *, #) Empty string Group Call Pickup UM_PLA_BARGE_I STRIG Specifies the feature number for performing barging in. 0 4 digits (0 9, *, #) Empty string Barge in
13 Flexible Key Settings Change the followings in " FLEX_BUTTO_FACILIT_ACTx " on page 271 (Before) (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_ETWORKCAMERA, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_ETWORKCAMERA, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_GROUPPICKUP
14 DSS Key Settings Change the followings in " DSS_BUTTO_FACILIT_ACTx " on page 273 (Before) (After) X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_ETWORKCAMERA, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_LIE, X_PAASOIC_IPTEL_OETOUCH, X_PAASOIC_IPTEL_ACD, X_PAASOIC_IPTEL_WRAPUP, X_PAASOIC_IPTEL_BLF, X_PAASOIC_IPTEL_LIESTATUS, X_PAASOIC_IPTEL_FORWARD, X_PAASOIC_IPTEL_PHOEBOOK, X_PAASOIC_IPTEL_CALLLOG, X_PAASOIC_IPTEL_PARARIG, X_PAASOIC_IPTEL_HOTELIG, X_PAASOIC_IPTEL_TRASFER, X_PAASOIC_IPTEL_BLIDTRASFER, X_PAASOIC_IPTEL_COFERECE, X_PAASOIC_IPTEL_DIRECTPICKUP, X_PAASOIC_IPTEL_CALLPARK, X_PAASOIC_IPTEL_PARKRETRIEVE X_PAASOIC_IPTEL_ETWORKCAMERA, X_PAASOIC_IPTEL_APPLICATIO X_PAASOIC_IPTEL_GROUPPICKUP Call Control Settings DIALPLA_REPLACE_LOG_EABLE Specifies whether to log the number after it was modified by the Dial Plan or the number as it was input. : Log the number in the outgoing call log after it was modified by the Dial Plan : Log the number in the outgoing call log as it was input
15 DIALPLA_MEMOR_DIAL_EABLE Specifies whether to enable Dial Plan processing for memory dialing. : Enable Dial Plan : Disable SIGALIG_AUTO_AS_EABLE_n Parameter ame Example SIGALIG_AUTO_AS_EABLE_1, SIGALIG_AUTO_AS_EABLE_2,, SIGALIG_AUTO_AS_EABLE_16 Specifies whether to enable the paging mode with "Click to Dial". : Enable : Disable etwork Camera Settings WCAMERA_AUTO_CLOSE_EABLE Specifies whether to disconnect the network camera when the call is ended. : Disconnect : Do not disconnect WCAMERA_OPE_RECEIVE_CALL Specifies whether to connect the network camera when the call associated with network camera is incoming. : Connect : Do not connect Logging Settings SSLOG_OUT_START Specifies whether to enable or disable exporting of the Application Log : Enable export to syslog : Disable
16 KX HDV430 Software File Version or later VoIP Settings [Line 1] [Line 12] Change the in " SRTP Mode " on page 117. (Before) (After) SRTP RTP/SRTP ote SRTP: Use only SRTP for outgoing and incoming calls. RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 0:SRTP 1:RTP/SRTP 2:Panasonic Original 3:SRTP/RTP ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Call Control Add the following WEB setting. Missed Call otification - Message Selects whether to display 'Missed calls' on the screen in standby mode. es o es OTIF_MISSEDCALL_EABLE Missed Call otification - LED Selects whether the LED is used to indicate a missed call es o es OTIF_MISSEDCALL_LED_EABLE Voice Message otification - Message Selects whether to display 'Voice MSG' on the screen in standby mode. es o es OTIF_VOIC _EABLE
17 Voice Message otification - LED Selects whether the LED is used to indicate a new voice message. es o es OTIF_VOIC _LED_EABLE Voice Message otification - Alarm Selects whether an alarm sound is used to indicate a new voice message. es o es OTIF_VOIC _ALARM_EABLE etwork Camera otification - Message Selects whether to display the etwork Camera message icon on the screen. es o es OTIF_ETWORKCAMERA_EABLE etwork Camera otification - LED Selects whether the LED is used to indicate a etwork Camera alert. es o es OTIF_ETWORKCAMERA_LED_EABLE etwork Camera otification - Alarm Selects whether an alarm sound is used to indicate a etwork Camera alert. es o es OTIF_ETWORKCAMERA_ALARM_EABLE Flexible Key Settings (o. 1 24) Change the in " Parameter" on page 130. (Before) (After) Max. 35 characters Max. 128 characters
18 DSS Console Change the in " Parameter" on page 142. (Before) (After) Max. 35 characters Max. 128 characters System Settings OTIFICATIO_MEU_EABLE Specifies whether to display the notification settings under MEU. : Display the notification settings : Do not display OTIF_MISSEDCALL_EABLE Specifies whether to display 'Missed calls' on the screen in standby mode. : Enable displaying 'Missed calls' in standby mode. : Disable Missed Call otification - Message OTIF_VOIC _EABLE Specifies whether to display 'Voice MSG' on the screen in standby mode. : Enable displaying 'Voice MSG' in standby mode. : Disable Voice Message otification - Message OTIF_ETWORKCAMERA_EABLE Specifies whether to display the etwork Camera message icon on the screen. : Enable displaying the icon. : Disable etwork Camera otification - Message
19 ECO_MODE_MEU_EABLE Specifies whether the "ECO mode" setting is displayed under MEU. : Enable displaying the ECO mode function under MEU. : Disable OTIF_MISSEDCALL_LED_EABLE Specifies whether the LED is used to indicate a missed call : Enable LED indication for a missed call. : Disable Missed Call otification - LED OTIF_VOIC _LED_EABLE Specifies whether the LED is used to indicate a missed call : Enable LED indication for a missed call. : Disable Voice Message otification - LED OTIF_VOIC _ALARM_EABLE Specifies whether the LED is used to indicate a new voice message. : Enable LED indication for voice messages. : Disable Voice Message otification - Alarm OTIF_ETWORKCAMERA_LED_EABLE Specifies whether the LED is used to indicate a etwork Camera alert. : Enable LED indication for etwork Camera alerts. : Disable etwork Camera otification - LED
20 OTIF_ETWORKCAMERA_ALARM_EABLE Specifies whether an alarm sound is used to indicate a etwork Camera alert. : Enable alarms for etwork Camera alerts. : Disable etwork Camera otification - Alarm OTIFICATIO_ALARM_TPE Specifies whether a voice mail alarm notification is used only the first time or every time. 0: First time only 1: Every time 0 BOOTLOG_SERVER_URI STRIG Specifies the URI for a boot logging server. Max. 256 characters Empty string TR-069 Settings TR069_REGISTERIG STRIG Specifies the line status that TR-069 outputs while the line is being registered. Max.16 characters Error TR069_REGISTERED STRIG Specifies the line status that TR-069 outputs when the line has been registered. Max.16 characters Registering
21 etwork Phonebook (Common) W_PHOEBOOK_ADVACED_SERACH Specifies whether to perform a narrowing search with the LDAP phonebook. : Enable : Disable SIP Settings SED_180_ALERT_EABLE Specifies whether to send 180 before an alert. : Send 180 : Do not send SRTP Settings Change the in " SRTP_COECT_MODE_n " on page 259. (Before) 0: SRTP 1: RTP/SRTP 2: SRTP&RTP(Panasonic PBX only) ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" must also be set to "". (After) 0: SRTP 1: RTP/SRTP 2: SRTP & RTP (Panasonic PBX only) 3: SRTP & RTP (RTP/AVP, a=crypto) ote 0: Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP.
22 SRTP_VIDEO_CALL_SDP_EABLE_n Parameter ame Example SRTP_VIDEO_CALL_SDP_EABLE_1, SRTP_VIDEO_CALL_SDP_EABLE_2,, SRTP_VIDEO_CALL_SDP_EABLE_16 Specifies whether to enable video calls with SDP in SRTP mode. : Enable to Video Call for SDP : Disable Telephone Settings CALLPARK_METHOD Specifies the method for the "Call Park" function. 1: Info message type 2: Refer type 2 CALL_PARK_PROG_KE_MODE Specifies the Call Park operation when it is assigned to a function key. 0: umbering plan 1: Specified park area with "CALLPARK_METHOD" Flexible Button Settings Change the in "FLEX_BUTTO_FACILIT_ARGx" on page 271. (Before) (After) Max. 35 characters Max. 128 characters DSS Key Settings Change the in "DSS_BUTTO_FACILIT_ARGx" on page 273. (Before) (After) Max. 35 characters Max. 128 characters
23 KX HDV430 Software File Version or later TWAMP Settings Add the TWAMP Settings to the [etwork] tab of Web User Interface Programming. Add the following web settings to the TWAMP settings. Enable TWAMP Selects whether to enable the TWAMP server function. es o o TWAMP_EABLE Control Port Specifies the port for the TWAMP control session TWAMP_COTROL_PORT Test Port Specifies the port for the TWAMP test session TWAMP_TEST_PORT Wait Time for Control Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session TWAMP_SERVER_WAIT_TIME Wait Time for Reflector Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session TWAMP_REFLECTOR_WAIT_TIME
24 System Settings DISPLA_DIVERSIO_EABLE Specifies whether the "Diversion" call information is displayed when receiving an incoming call. : Enable displaying the "Diversion" information : Disable TWAMP Settings Add the TWAMP Settings to Configuration File Programming. Add the following configuration parameter to the TWAMP settings. TWAMP_EABLE Specifies whether to enable the TWAMP server function. : Enable the TWAMP server function. : Disable Enable TWAMP TWAMP_COTROL_PORT Specifies the port for the TWAMP control session Control Port TWAMP_TEST_PORT Specifies the port for the TWAMP test session Test Port TWAMP_SERVER_WAIT_TIME Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session Wait Time for Control
25 TWAMP_REFLECTOR_WAIT_TIME Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session Wait Time for Reflector TWAMP_PADDIG_ZERO Specifies the packet padding for the TWAMP test session. : All zeros : Random PQX8316XA PP0816SM2116
Supplement for Administrator Guide KX-HDV330. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV330 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2016-11 1. Additional Information
More informationSupplement for Administrator Guide KX-HDV230. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV230 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2016-10 1. Additional Information
More informationSupplement for Administrator Guide KX-HDV230. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV230 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2017-01 1. Additional Information
More informationSupplement for Administrator Guide KX-HDV130. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV130 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2017-01 1. Additional Information
More informationSupplement for Administrator Guide KX-HDV130. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV130 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2016-08 1. Additional Information
More informationSupplement for Administrator Guide KX-TGP600. SIP Cordless Phone
Supplement for Administrator Guide SIP Cordless Phone Model o. KX-TGP6 Please use this supplement manual together with the latest English Administrator Guide. Document Version 217-1 1. Additional Information
More informationSupplement for Administrator Guide KX-HDV100. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV100 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2017-03 1. Additional Information
More informationSupplement for Administrator Guide KX-TGP600. SIP Cordless Phone
Supplement for Administrator Guide SIP Cordless Phone Model o. KX-TGP6 Please use this supplement manual together with the latest English Administrator Guide. Document Version 216-6 Additional Information
More informationSupplement for Administrator Guide KX-HDV100. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV100 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2016-06 Additional Information for
More informationSupplement for Administrator Guide KX-HDV230. SIP Phone. Please use this supplement manual together with the latest English Administrator Guide.
Supplement for Administrator Guide Model o. SIP Phone KX-HDV230 Please use this supplement manual together with the latest English Administrator Guide. Document Version 2016-04 Additional Information for
More informationKX-HDV130/ KX-HDV230/ KX-HDV330/ KX-HDV430
Administrator Guide SIP Phone KX-HDV430 Model No. KX-HDV130/ KX-HDV230/ KX-HDV330/ KX-HDV430 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product
More informationKX-HDV130 KX-HDV230 KX-HDV330 KX-HDV340 KX-HDV430
Administrator Guide SIP Phone KX-HDV430 Model No. KX-HDV130 KX-HDV230 KX-HDV330 KX-HDV340 KX-HDV430 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this
More informationThank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use.
Administrator Guide SIP Phone Model No. KX-HDV430 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. In this
More informationSupplement for Administrator Guide
Supplement for Administrator Guide Model o. SIP Phone KX-HDV130/ KX-HDV230/ KX-HDV330/ KX-HDV430 Please use this supplement manual together with the latest English Administrator Guide. Document Version
More informationRelease Note. Software Version: Models:X1/ X2/ X2C/ X3S/ X4/ H2S/ H3/ H5. Date:
Release Note Software Version:2.10.0 Models:X1/ X2/ X2C/ X3S/ X4/ H2S/ H3/ H5 Date:2019-1-30 1 New Features 1. Added BLF status prompt supports customization. 2. Supported AutoProvision now features. 3.
More informationGXP1610/1615/1620/1625/1628/1630 Firmware Release Notes IMPORTANT UPGRADING NOTE
GXP1610/1615/1620/1625/1628/1630 Firmware Release Notes IMPORTANT UPGRADING NOTE Starting from firmware version 1.0.2.21, downgrading to version 1.0.2.4 or lower requires a matched protocol for upgrading
More informationUCx Feature Guide for Infinity phones
UCx Feature Guide for Infinity phones Date: 23 August 2018 Version: 1.4 System: UCx Release: 6.0 Phone models: E-MetroTel will provide support for the following Infinity IP phones, as long as the phones
More informationGXP1610/1615/1620/1625/1628/1630 Firmware Release Notes IMPORTANT UPGRADING NOTE
GXP1610/1615/1620/1625/1628/1630 Firmware Release Notes IMPORTANT UPGRADING NOTE Starting from firmware version 1.0.2.21, downgrading to version 1.0.2.4 or lower requires a matched protocol for upgrading
More informationYealink SIP IP Phones Release Note of Version 71
Yealink SIP IP Phones Release Note of Version 71 1. Introduction Firmware Version: T28:2.71.0.130(Beta) upgrade to 2.71.0.140(Business) T26:6.71.0.130(Beta) upgrade to 6.71.0.140(Business) T22:7.71.0.130(Beta)
More informationNotices Information. Htek IP Phones UC926E User Manual
Notices Information Htek IP Phones UC926E User Manual Version 2.0.4.4.24 Feb. 2018 1 Notices Information Notices Information Copyright Copyright 2005-2018 Nanjing Hanlong Technology CO., LTD. All rights
More informationTeléfono inteligente de sobremesa
Teléfono inteligente de sobremesa KX-UT670 Telefono da scrivania SIP intelligente KEY FEATURES Telefono da scrivania intelligente e programmabile - fino a 6 account SIP Touchscreen a colori da 7" Compatibile
More informationXonTel XT-23G User manual
XonTel XT-23G User manual Notices Information Copyright XonTel owns all the right to revise and change this document at any time. And all the illustrations and instructions in this paper are subject to
More informationXT-13P IP Indoor Monitor User Manual
XT-13P IP Indoor Monitor User Manual About this manual Thank you for choosing XT-13P IP indoor monitor. This manual is intended for end users, who need to use and configure the indoor monitor. It provides
More informationNotices Information. Htek IP Phones UC923 User Manual
Notices Information Htek IP Phones UC923 User Manual Version 2.0.4.4.29 Mar. 2018 1 Notices Information Notices Information Copyright Copyright 2005-2018 Nanjing Hanlong Technology CO., LTD. All rights
More informationGXP1780/1782/1760/1760W Firmware Release Notes
GXP1780/1782/1760/1760W Firmware Release Notes Table of Content FIRMWARE VERSION 1.0.1.30... 3 PRODUCT NAME... 3 DATE... 3 BUG FIX... 3 FIRMWARE VERSION 1.0.1.28... 4 PRODUCT NAME... 4 DATE... 4 ENHANCEMENT...
More information/ / UC912P Usermanual 1
// UC912P Usermanual 1 Notices Information Notices Information Copyright Copyright 2005-2017 Nanjing Hanlong Technology CO., LTD. All rights reserved. Nanjing Hanlong Technology CO., LTD. owns all the
More informationSupplement for Administrator Guide
Supplement for Administrator Guide Model o. SIP Phone KX-HDV130/ KX-HDV230/ KX-HDV330/ KX-HDV430 Please use this supplement manual together with the latest English Administrator Guide. Document Version
More informationTable of Contents. HostedVoIP_End_User_Portal_0816rev4.doc Page 2 of 81
. CenturyLink Hosted VoIP End User Portal User Guide Table of Contents Portal Navigation... 4 Home Page Navigation... 4 Call Logs... 6 Exporting Call Logs... 7 Call Settings... 8 Call Waiting... 9 Auto
More informationLinksys SPA922 SIP IP Phone
Product ame: Manufacturer: - Model umber: SPA-922-R Availability: Discontinued Please note that the Linksys SPA922 has been discontinued. We recommend the Cisco SPA303 as a good alternative. Stylish and
More informationNotices Information. Htek IP Phones UC912E User Manual
Notices Information Htek IP Phones UC912E User Manual Version 2.0.4.4.45 Jun.2018 1 Notices Information Notices Information Copyright Copyright 2005-2018 Nanjing Hanlong Technology CO., LTD. All rights
More informationCOLOR LCD EXPANSION MODULE
COLOR LCD EXPANSION MODULE USER GUIDE UC40 Nanjing Hanlong Technology Co., Ltd 86-25-84658050 support@hanlongtek.com Notices Information Notices Information Copyright Copyright 2005-2014 Nanjing Hanlong
More informationNEC Enterprise Solutions. Konftel 300IP and 300IPX Handset Interoperability UNIVERGE 3C
NEC Enterprise Solutions Konftel 300IP and 300IPX Handset Interoperability UNIVERGE 3C Initial Test Date: 04/ 10 / 2017 Tested by: Kieran Dalton Current Version: 1.0 1 Issue Number Date Details of Change
More informationDesktop VirtualPBX Softphone Setup Instructions for Mac
Desktop VirtualPBX Softphone Setup Instructions for Mac If you have not yet done so, please contact us to purchase the VirtualPBX Desktop Softphone. Desktop Softphones are a one time payment of $40 for
More informationGXP1610/1615/1620/1625/1628/1630 Firmware Release Notes IMPORTANT UPGRADING NOTE
GXP1610/1615/1620/1625/1628/1630 Firmware Release Notes IMPORTANT UPGRADING NOTE Starting from firmware version 1.0.2.21, downgrading to version 1.0.2.4 or lower requires a matched protocol for upgrading
More informationCopyright Nanjing Hanlong Technology CO., LTD. All rights reserved.
UC923 Usermanual 1 Notices Information Notices Information Copyright Copyright 2005-2017 Nanjing Hanlong Technology CO., LTD. All rights reserved. Nanjing Hanlong Technology Co., LTD. owns all the right
More informationIP Telephone User Guide
IP Telephone LIP-6830 SIP (Session Initiation Protocol) Broadworks Please read this manual carefully before operating your set. Retain it for future reference. LGN6830-1219SBUG-01.01 June 07 Regulatory
More informationLinksys SPA921 IP Phone
Product ame: Manufacturer: - Model umber: SPA-92-R Availability: Discontinued Please note that the Linksys SPA-92 has been discontinued. We recommend the Cisco SPA-303 as a good alternative. Stylish and
More informationThis device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
Copyright 2012 YEALINK NETWORK TECHNOLOGY Copyright 2012 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means,
More informationNotices Information. Htek IP Phones UC912 User Manual
Notices Information Htek IP Phones UC912 User Manual Version 2.0.4.4.29 Mar. 2018 1 Notices Information Notices Information Copyright Copyright 2005-2018 Nanjing Hanlong Technology CO., LTD. All rights
More informationThis is the first edition based on firmware version 61. The topics provided in this guide include: Chapter 1 Overview. Chapter 2 Getting Started
About This Guide Thank you for choosing the SIP-T65P IP phone, an exquisitely designed SIP IP phone. This unit provides business telephony features such as Call Hold, Call Transfer, Busy Lamp Field, Shared
More informationYealink T20P IP User Guide
Yealink T20P IP User Guide 1 Introducing your Yealink T20P IP Phone The T20P features a 2 line LCD display and 5 functions, where basic business feature requirements are the main requirements. An Overview
More informationAdministrator and Provisioning Manual VSP725 SIP Endpoint Deskset
Administrator and Provisioning Manual VSP725 SIP Endpoint Deskset Rev. 4 10/14 Congratulations on your purchase of this VTech product. Before using this VTech product, please read Important Safety Information
More informationThis device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
Copyright 2015 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright 2015 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or
More informationNotices Information. Copyright. Safety cautions. WEEE Warning. Copyright XonTel All rights reserved.
XonTel S23P Notices Information Copyright Copyright 2005-2017 XonTel All rights reserved. XonTel owns all the right to revise and change this document at any time. And all the illustrations and instructions
More information1.7 Useful Features. Time (Day/Night/Lunch) Service. Confirming the current mode (with a display PT only) 1-74 Operations
Time (Day/Night/Lunch) Service This system supports the Day, Night and Lunch modes. The system operation for originating and receiving calls can be different in the day, night and lunch modes. Time Service
More informationErisTerminal SIP Deskset VSP715 Administrator and Provisioning Manual
ErisTerminal SIP Deskset VSP715 Administrator and Provisioning Manual Rev. 4 6/16 CONTENTS Preface... 6 Text Conventions...7 Audience...7 Related Documents...7 Introducing the VSP715... 8 About the VSP715
More informationNotices Information. Htek IP Phones UC924E User Manual
Notices Information Htek IP Phones UC924E User Manual Version 2.0.4.4.29 Mar. 2018 1 Notices Information Notices Information Copyright Copyright 2005-2018 Nanjing Hanlong Technology CO., LTD. All rights
More informationErisTerminal SIP Deskset VSP725 Administrator and Provisioning Manual
ErisTerminal SIP Deskset VSP725 Administrator and Provisioning Manual Rev. 9 6/16 CONTENTS Preface... 6 Text Conventions...7 Audience...7 Related Documents...7 Introducing the VSP725... 8 About the VSP725
More informationModel No. KX-TGP500 B01. Model No. KX-TGP550
User Guide SIP Cordless Phone Model No. KX-TGP500 B01 Model No. KX-TGP550 T01 Model shown is KX-TGP500. Model shown is KX-TGP550. Thank you for purchasing a Panasonic product. You can configure some of
More informationIP PHONE DW-310P DATASHEET DW-310P. wwww.denwaip.com
IP PHONE DATASHEET w DATASHEET IP PHONE DENWA IP PHONE Support SIP 2.0 (RFC3261) and correlative RFCs. Support 2 SIP lines. Can connect to SIP1 and SIP2 server at the same time and can incoming and outgoing
More informationAndroid OS4.2 Video IP Phone UTT 600 Datasheet
Android OS4.2 Video IP Phone UTT 600 Datasheet The UTT 600 provides the complete desk phone solutions with flexible functionality, HD Voice Quality, and highly easy operation. It is absolutely an excellent
More informationThis device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright 2013 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or
More informationEIP 7012 Essence VoIP Phone Administration Guide Version 1.0B
Essence Technology EIP 7012 Essence VoIP Phone Administration Guide Version 1.0B Table of Contents 1 Introduction... 1 1.1 Hardware Overview... 1 1.2 Software Overview... 1 2 Keypad interface for IP Phone
More informationThis device is marked with the CE mark in compliance with EC Directives 2014/35/EU and 2014/30/EU.
Copyright Copyright 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD. Copyright 2017 Yealink(Xiamen) Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or
More informationTraining Guide Index
Training Guide Index Page 1: Procedure on System Programming via Handset To Exit programming Page 2: System Programming Date & Time Page 3: Programming System Speed Dial Numbers Programming System Speed
More informationModel No. KX-TGP500 B08. Model No. KX-TGP550
User Guide SIP Cordless Phone Model No. KX-TGP500 B08 Model No. KX-TGP550 T08 Model shown is KX-TGP500. Model shown is KX-TGP550. Thank you for purchasing a Panasonic product. You can configure some of
More informationSoLink-Lite IP-PBX. Administrator Guide. (Version 1.0)
SoLink-Lite IP-PBX Administrator Guide (Version 1.0) TABLE OF CONTENT 1.0 Introduction... 1 2.0 Setting Up the IP-PBX... 2 3.0 Logging On... 3 4.0 Configuring Network... 4 5.0 Configuring Hardware... 5
More informationCopyright. Warranty. Declaration of Conformity. CE Mark Warning. Industry Canada (IC) Part 15 FCC Rules
Copyright Copyright 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD. Copyright 2017 Yealink(Xiamen) Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or
More informationAllworx Admin Update for 7.0
Allworx Admin Update for 7.0 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise
More informationIcon Instructions... 6 LED Instructions
... 4... 5... 5 Icon Instructions... 6 LED Instructions... 7... 8... 8 Backlight... 8 Language... 8 Time and Date... 9... 10 Volume... 10 Ring Tones... 10... 11 Directory... 11 Local Directory... 11...
More informationYEALINK T41G DESCRIPTION
YEALINK T41G THE SIP-T41P IS A FEATURE-RICH SIP PHONE FOR BUSINESS. THE 3-LINE IPPHONE HAS BEEN DESIGNED BY PURSUING EASE OF USE IN EVEN THE TINIESTDETAILS. DELIVERING A SUPERB SOUND QUALITY AS WELL AS
More informationErisTerminal SIP Deskset VSP735 Administrator and Provisioning Manual
ErisTerminal SIP Deskset VSP735 Administrator and Provisioning Manual Rev. 9 6/16 CONTENTS Preface... 6 Text Conventions...7 Audience...7 Related Documents...7 Introducing the VSP735... 8 About the VSP735
More informationAction URL and Active URI specification
Action URL and Active URI specification Version: V1.0 Release date: 2014-3-29 2011-2014 Fanvil Co., Ltd. This document contains information that is proprietary to Fanvil Co., Ltd (Abbreviated as Fanvil
More informationSDP-R25 User Manual 05/06/2015
SDP-R25 User Manual 05/06/2015 1 Content Production Overview... 4 1. Production... 4 2. Features...4 Configuration...7 1. Web Login... 7 1.1. Obtaining the IP address... 7 1.2. Login the Web...7 2. Status...8
More informationHKBN Unified Communications T61P SIP Phone User Guide
HKBN Unified Communications T61P SIP Phone User Guide Contents Getting Start of Phone... 2 Phone Package... 2 Assembling the phone... 2 SIP Phone Button... 4 SIP Phone Screen Display... 5 Icon Instruction...
More informationCopyright 2014 YEALINK NETWORK TECHNOLOGY CO., LTD.
Copyright 2014 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright 2014 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or
More informationReference Guide. IP Phone/Calling Features Voice Mail Personal Assistant Toolbar. Dialing. Your Phone Calling Features.
TelNet OfficeEdge Complete Polycom SoundPoint 550 IP Phone. Reference Guide IP Phone/Calling Features Voice Mail Personal Assistant Toolbar Dialing To dial phone number or extension Lift your handset and
More informationCopyright. Trademarks. Warranty. End User License Agreement. Copyright 2018 YEALINK(XIAMEN) NETWORK TECHNOLOGY
Copyright Copyright 2018 YEALINK(XIAMEN) NETWORK TECHNOLOGY Copyright 2018 Yealink (Xiamen) Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted
More informationTable of Contents. End_User_Portal_0617rev4.doc Page 2 of 78
. CenturyLink End User Portal User Guide Table of Contents Portal Navigation... 4 Home Page Navigation... 4 Call Logs... 6 Exporting Call Logs... 7 Call Features... 8 Call Recording... 8 Call Settings...
More informationGXP1780/1782/1760Firmware Release Note
GXP1780/1782/1760Firmware Release Note Table of Content FIRMWARE VERSION 1.0.1.8... 2 PRODUCT NAME... 2 DATE... 2 ENHANCEMENT... 2 BUG FIX... 2 NEW FEATURES OVERVIEW... 5 ACCOUNT MODE... 5 TOGGLE PANI,
More informationCalling Features. Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3 1
You can perform basic call-handling tasks using a range of features and services. Feature availability can vary; contact your system administrator for more information. Softkey feature map, page 2 Answer,
More informationThis device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
Copyright 2014 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright 2014 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or
More informationANSWERING CALLS USING PHONE FEATURE KEYS
DT820 - Desi Less Quick User Guide for DT820 phones controlled by SIP@Net For detailed information please consult the comprehensive User Guide available at : www.nec-enterprise.com. NEC Nederland B.V.
More informationIP Phones Deployment Guide for BroadWorks Environment
. IP Phones Deployment Guide for BroadWorks Environment II About This Guide About This Guide BroadSoft UC-One is an open Unified Communications platform that provides a single end-user interface, full
More informationInstallation & Configuration Guide
Installation & Configuration Guide Release 2.0 Release 2.0 Vertical Communications, Inc. reserves the right to revise this publication and to make changes in content without notice. 2010 by Vertical Communications,
More informationPLEASE READ. This user manual is from the manufacturer Jive Communications may not support some features discussed in this document.
PLEASE READ This user manual is from the manufacturer Jive Communications may not support some features discussed in this document. Please see our online documentation or contact us for a complete list
More informationThis device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
Copyright 2015 YEALINK NETWORK TECHNOLOGY CO., LTD Copyright 2015 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or
More informationSP-R50P IP Phone User Manual 12/ 05/ 2014
SP-R50P IP Phone User Manual 12/ 05/ 2014 1 Contents 1. Overview... 5 1.1. Introduction...5 1.2. Features... 6 1.3. Keypad...8 1.4. Icons introduction... 10 2. Installation...11 2.1. Check package contents...
More informationLCD Expansion Module. Quick Start Guide (V1.0) EXP20.
LCD Expansion Module EXP20 www.yealink.com Quick Start Guide (V1.0) Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator.
More informationAvaya J169/J179 IP Phone SIP Quick Reference
s Name Administration To access administration settings. Call is active. Avaya J169/J179 IP Phone SIP Quick Reference Release 2.0 April 2018 2018, Avaya Inc. All Rights Reserved. About To display the phone
More informationAddPac IP/Video Phone Series
AddPac IP/Video Phone Series Paging, Intercom & BLF(Busy Lamp Field) function for Asterisk PBX AddPac Technology Sales and Marketing www.addpac.com Contents Paging & Intercom Service with Asterisk PBX
More informationAastra 673xi / 675xi. Telephony with SIP Phones at the Aastra 800/OpenCom 100 Communications System User Guide
Aastra 673xi / 675xi Telephony with SIP Phones at the Aastra 800/OpenCom 100 Communications System User Guide Welcome to Aastra Thank you for choosing this Aastra product. Our product meets the strictest
More informationU M. ser. anual Please Read this manual before using the Electronic Modular Switching System. Model KX-T206E. Electronic Modular Switching System
Electronic Modular Switching System!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! U M ser For 7000 Series telephones anual Please Read this manual before using the
More informationLinkus User Guide. Android Edition 1.2.6
Android Edition 1.2.6 Revised: March 30, 2017 CONTENTS INTRODUCTION... 3 About This Guide... 3 Standard Telephone Features... 3 Specifications... 3 LINKUS SEVER SETTINGS... 4 Installing and Enabling Linkus...
More informationPhone & Features Guide
Phone & Features Guide Eleventh Edition Contents Introduction To The Guide... 12 1. Star2Star Supported Phones... 13 2. Polycom Phones... 16 a). Answering a Call... 16 b). Making a Call... 16 c). Microphone
More informationThis device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.
Copyright 2014 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright 2014 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or
More informationErisStation Conference Phone with Bluetooth VCS752 Administrator and Provisioning Manual
ErisStation Conference Phone with Bluetooth VCS752 Administrator and Provisioning Manual Rev. 1 12/16 CONTENTS Preface... 6 Text Conventions...7 Audience...7 Related Documents...7 Introducing the VCS752...
More informationEXP38 User Manual Yealink Network Technology Co. Ltd. All rights reserved. Version 41.0
EXP38 User Manual 2009 Yealink Network Technology Co. Ltd. All rights reserved. Version 41.0 www.yealink.com About This Guide This Expansion Module EXP38 is designed for connection of the Yealink Enterprise
More informationErisTerminal SIP Deskset VSP726 Administrator and Provisioning Manual
ErisTerminal SIP Deskset VSP726 Administrator and Provisioning Manual Rev. 1.1 06/16 CONTENTS Preface... 7 Text Conventions...8 Audience...8 Related Documents...8 Introducing the VSP726... 9 About the
More informationZultys Mobile Communicator for iphone 8.0
July 18 Zultys Mobile Communicator for iphone 8.0 Author: Zultys Technical Support Department This document covers basic use of the Zultys Mobile Communicator for iphone application. The Zultys Mobile
More informationGIGABIT COLOR IP PHONE
GIGABIT COLOR IP PHONE USER GUIDE UC842 Version:1.0.3.59 Nanjing Hanlong Technology Co., Ltd 86-25-84608050 support@hanlongtek.com Notices Information Notices Information Copyright Copyright 2005-2013
More informationSP-R59P IP Phone User Manual
SP-R59P IP Phone User Manual 1 Content 1. Overview...5 1.1. Introduction...5 1.2. Features...6 1.3. Keypad...8 1.4. Icons introduction... 11 2. Installation...12 2.1. Check package contents...12 2.2. Connection
More informationOperating Instructions
Operating Instructions Model No. SIP Phone KX-HDV230 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. R
More informationConfigure the ATA 191
Telephony s, page 1 Product-Specific Configuration Parameters, page 7 Add Users to Cisco Unified page 12 Telephony s The following table lists the supported telephony features. Use Cisco Unified Communications
More informationAvaya Campus PBX MICHIGAN STATE UNIVERSITY. Telecommunication Systems. Avaya 2420 User Guide
Avaya Campus PBX MICHIGAN STATE UNIVERSITY Telecommunication Systems Avaya 2420 User Guide MICHIGAN STATE UNIVERSITY Avaya 2420 Telephone User Guide Michigan State University Telecommunication Systems
More informationNortel IP Phone 1120E/1140E User Guide (CICM).
Nortel IP Phone 1120E/1140E User Guide (CICM). Overview Nortel IP Phone 1120E/1140E brings voice and data to the desktop by connecting directly to a Local Area Network (LAN) through an Ethernet connection.
More informationDigium Phone User Guide. Digium Phone firmware version 1.0
Digium Phone User Guide Digium Phone firmware version 1.0 2012 Digium, Inc. All rights reserved. This document is the sole property of Digium, Inc. It contains proprietary information of Digium. Digium
More informationDescription. Paging to an external pager.
4. DPT Features P Paging SUMMARY Allows you to make a voice announcement to several people at the same time. Your message is announced over the built-in speakers of proprietary telephones (PT) and/or external
More informationZultys Mobile Communicator for iphone 4.0
December 14 Zultys Mobile Communicator for iphone 4.0 Author: Zultys Technical Support Department This document covers basic use of the Zultys Mobile Communicator for iphone application. The Zultys Mobile
More informationErisStation SIP Conference Phone with Four Wireless Mics VCS754 Administrator and Provisioning Manual
ErisStation SIP Conference Phone with Four Wireless Mics VCS754 Administrator and Provisioning Manual Rev. 2 08/15 CONTENTS Preface... 6 Text Conventions...7 Audience...7 Related Documents...7 Introducing
More information