Supplement for Administrator Guide KX-TGP600. SIP Cordless Phone

Transcription

1 Supplement for Administrator Guide SIP Cordless Phone Model o. KX-TGP6 Please use this supplement manual together with the latest English Administrator Guide. Document Version 217-1

2 1. Additional Information for Specifying the Server Address 1.1 Basic format Format: name> * The server name (<host>) may be the IP address or the domain. * Maximum length: 384 characters 1.2 Macros used with file names Macro Format {XXXX} Macro Expansion If the URL contains {MAC}, it will be replaced with the {MAC} device s MAC address in uppercase letters. Example: {MAC} 8FC571EB If the URL contains {mac}, it will be replaced with the {mac} device s MAC address in lowercase letters. Example: {mac} 8fc571eb If the URL contains {MODEL}, it will be replaced with {MODEL} the device s model name. Example: {MODEL} KX-TGP6 If the URL contains {fwver}, it will be replaced with the {fwver} device s firmware version. Example: {fwver} 1. ote Macros distinguish between uppercase and lowercase letters. Macros not specified above will be treated as strings of characters. 1.3 Target WEB Settings/Configuration Parameters WEB Setting Configuration Parameter DHCP Host ame DHCP_HOST_AME Standard File URL CFG_STADARD_FILE_PATH Product File URL CFG_PRODUCT_FILE_PATH Master File URL CFG_MASTER_FILE_PATH - CFG_ROOT_CERTIFICATE_PATH - CFG_CLIET_CERT_PATH - CFG_PKE_PATH Firmware File URL FIRM_FILE_PATH HTTP User Agent HTTP_USER_AGET - XMPP_ROOT_CERT_PATH - XMPP_CLIET_CERT_PATH - XMPP_PKE_PATH - LDAP_ROOT_CERT_PATH - LDAP_CLIET_CERT_PATH - LDAP_PKE_PATH - HS_LAGUAGE_PATHx - WEB_LAGUAGE_PATHx User Agent SIP_USER_AGET - SIP_TLS_ROOT_CERT_PATH - SIP_TLS_CLIET_CERT_PATH - SIP_TLS_PKE_PATH - POWER_O_DISPLA_LOGO_PATH - DISPLA_WALLPAPER_DARK_PATH - DISPLA_WALLPAPER_LIGHT_PATH 2. Additional Information for Specifying the LDAP Server Add "ldap://"or "ldaps://" before the LDAP server address. (Example) LDAP_SERVER="ldap:// "

3 KX TGP6 Software File Version or later VoIP Settings [Line 1] [Line 8] Change the followings in " SRTP Mode " on page 136 (Before) SRTP RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. (After) SRTP RTP/SRTP ote RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls Handset Registration Settings EXT_REGISTERED_HS_UMBER ITEGER Specifies the handset number to register or deregister. : The handset number will be registered in order starting with the lowest available number. (1 to 8) 1-8: If the specified handset number is already registered, it will be deregistered. If the specified handset number is not registered, it will be registered. ote If the handset IPEI parameters are registered on a base unit, this setting is invalid. - 8 (: ormal order, 1: handset 1, 2: handset 2, 8: handset 8) XSI Settings XSI_PHOEBOOK_CCLIC_ITVL ITEGER Specifies the interval, in minutes, between periodic checks for updates of the Xsi Directory (Phonebook) files. If this parameter is set to "", the timing is the same as updating the configuration files. 432 XSI_PHOEBOOK_RESC_DURATIO ITEGER Specifies the time range, in minutes, during which connected units can access the server. Xsi Directory (Phonebook) files will be downloaded at a random time within this range. 1439

4 BSD_GROUP_EABLE_n Parameter ame Example BSD_GROUP_EABLE_1, BSD_GROUP_EABLE_2,,BSD_GROUP_EABLE_8 Specifies whether to enable or disable the "Group" type for Xsi phonebooks. : Enable : Disable BSD_GROUPCOM_EABLE_n Parameter ame Example BSD_GROUPCOM_EABLE_1, BSD_GROUPCOM_EABLE_2,,BSD_GROUPCOM_EABLE_8 Specifies whether to enable or disable the "Group Common" type for Xsi phonebooks. : Enable : Disable BSD_ETERPRISE_EABLE_n Parameter ame Example BSD_ETERPRISE_EABLE_1, BSD_ETERPRISE_EABLE_2,,BSD_ETERPRISE_EABLE_8 Specifies whether to enable or disable the "Enterprise" type for Xsi phonebooks. : Enable : Disable BSD_ETERPRISECOM_EABLE_n Parameter ame Example BSD_ETERPRISECOM_EABLE_1, BSD_ETERPRISECOM_EABLE_2,,BSD_ETERPRISECOM_EABLE_8 Specifies whether to enable or disable the "Enterprise Common" type for Xsi phonebooks. : Enable : Disable BSD_PERSOAL_EABLE_n Parameter ame Example BSD_PERSOAL_EABLE_1, BSD_PERSOAL_EABLE_2,,BSD_PERSOAL_EABLE_8 Specifies whether to enable or disable the "Personal" type for Xsi phonebooks. : Enable : Disable

5 SRTP Settings Change the followings in " SRTP_COECT_MODE_n " on page 269 (Before) : SRTP 1: RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. (After) : SRTP 1: RTP/SRTP 2: RTP&SRTP (Panasonic PBX only) ote : Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" must also be set to "" Call Control Settings VM_SUBSCRIBE_SPECIFIC_n Parameter ame Example VM_SUBSCRIBE_SPECIFIC_1, VM_SUBSCRIBE_SPECIFIC_2,..., VM_SUBSCRIBE_SPECIFIC_8 STRIG Specifies the defined name of a voice mail box. Max. 32 characters Empty string Change the followings in " IDLE_SOFT_KE_A " on page 298 (Before) 1: Phonebook 2: Menu 3: Outgoing Call Log 4: Incoming Call Log 5: Redial 6: Page (After) 1: Phonebook 2: Menu 3: Outgoing Call Log 4: Incoming Call Log 5: Redial 6: Page 7: Intercom Call Change the followings in " IDLE_SOFT_KE_B " on page 298 (Before) 1: Phonebook 2: Menu 3: Outgoing Call Log 4: Incoming Call Log 5: Redial 6: Page (After)

6 1: Phonebook 2: Menu 3: Outgoing Call Log 4: Incoming Call Log 5: Redial 6: Page 7: Intercom Call Change the followings in " IDLE_SOFT_KE_C " on page 299 (Before) 1: Phonebook 2: Menu 3: Outgoing Call Log 4: Incoming Call Log 5: Redial 6: Page (After) 1: Phonebook 2: Menu 3: Outgoing Call Log 4: Incoming Call Log 5: Redial 6: Page 7: Intercom Call SHARED_STOP_LIE_SEIZE Specifies whether to stop seizing the line of the Shared Call at the unit side or not. : Stop seizing line : Seize line

7 KX TGP6 Software File Version or later System Settings FWD_DD_MEU_EABLE Specifies whether the "Fwd/DD" setting is displayed in MEU. : Displayed : ot displayed BLOCK_AO_MEU_EABLE Specifies whether the "Block Anonymous" setting is displayed in MEU. : Displayed : ot displayed AO_CALL_MEU_EABLE Specifies whether the "Anonymous Call" setting is displayed in MEU. : Displayed : ot displayed TIME_ZOE_SET_EABLE Specifies whether the "Time Zone" setting is displayed in MEU. : Displayed : ot displayed Handset Registration Settings IPEI_CHAGE_HS_EABLE Specifies whether to enable the ability to change handset registration with IPEI. : Enable changing : Disable XSI Settings BSD_MULTI_TPE_EABLE Specifies whether you can select the type of Xsi phonebook. : Enable : Disable

8 XMPP (UC-OE) Settings UC_USERID_CASE_SESITIVE Specifies whether the authentication ID is case-sensitive when accessing the UC server. : Enable : Disable AT Settings EXTERAL_RTP_PORTx ITEGER x=1-1 Specifies the port number of the router in Static AT status., (only even ports) : Disable SIP Settings SIP_REPLACE_EABLE_n Parameter ame Example SIP_REPLACE_EABLE_1, SIP_REPLACE_EABLE_2,, SIP_REPLACE_EABLE_8 Specifies whether to use "Replaces Header". : Use "Replaces Header" : Do not use "Replaces Header" SED_18_ALERT_EABLE Specifies whether to send 18 before an alert. : Send 18 : Do not send 18 SIP_IC_IVITE_RTP_MODE_n Parameter ame Example SIP_IC_IVITE_RTP_MODE_1, SIP_IC_IVITE_RTP_MODE_2,, SIP_IC_IVITE_RTP_MODE_8 ITEGER Specifies whether to send RTP after receiving a second IVITE. : Start receiving RTP after receiving a second IVITE 1: Start sending/receiving RTP after receiving a second IVITE

9 SIPxTLS Settings SIP_TLS_RADOM_PORT Specifies whether to assign a random port (ephemeral port) number or a static port number. ote All lines that use SIP-TLS are defined by this parameter. UDP/TCP ports are unaffected by this parameter. : Assign a random TLS port number : Assign a static TLS port number (Refer to SIP_SRC_PORT_n) VQ Report by PUBLISH VQREPORT_SED_OPT_CODEC_EABLE Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when the codec is changed. : Send VQREPORT when a change of codec is detected : Send VQREPORT at the end of a conversation VQREPORT_SED_OPT_W_CHAGE ITEGER Specifies the number of consecutive times the MOS (Mean Opinion Score) value may fall below the threshold value specified by either ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG before the phone sends VQREPORT. The ALERT_REPORT_TRIGGER setting determines whether ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARIG is used as the threshold. 5 (The number of consecutive times. :Disable) Example: If "2" is specified and the MOS value falls within the threshold 2 consecutive times, VQREPORT is sent Telephone Settings CIP_FROM_EABLE Specifies whether to use the 'FROM' header or the 'PAI' header in CIP (Calling umber Identification Presentation). : Use 'FROM' header : Use 'PAI' header

10 HS_IDLE_DISPLA_TPE ITEGER Specifies what is shown on the display in standby mode. : Off 1: Phone umber 2: Phone umber and Handset ame 3: Handset ame 3 OISE_REDUCTIO_MODE_HSy Parameter ame Example OISE_REDUCTIO_MODE_HS1, OISE_REDUCTIO_MODE_HS2,, OISE_REDUCTIO_MODE_HS8 ITEGER Specifies whether to enable the oise Reduction feature of each handset. : Disable oise Reduction 1: Enable oise Reduction TALK_O_CHARGE_MODE_HSy Parameter ame Example TALK_O_CHARGE_MODE_HS1,TALK_O_CHARGE_MODE_HS2,, TALK_O_CHARGE_MODE_HS8 ITEGER Specifies whether to enable the Talk On Charger feature of each handset. : Disable Talk On Charger 1: Enable Talk On Charger Call Control Settings FWD_SCHRO_FORCE_DISABLE_n Parameter ame Example FWD_SCHRO_FORCE_DISABLE_1, FWD_SCHRO_FORCE_DISABLE_2,, FWD_SCHRO_FORCE_DISABLE_8 Specifies whether to synchronize the Call Forward settings in FWD_DD_SCHRO_EABLE_n. : Do not synchronize : Synchronize COF_SERVER_HOLD_EABLE Specifies whether to hold the call when connecting an -party conference. : Hold the call : Do not hold the call

11 KX TGP6 Software File Version 2.1 or later etwork Status Change the followings in " Setting Mode " on page 77. (Before) Disable LLDP Manual (After) Disable LLDP CDP LLDP/CDP Manual Ethernet Port Settings Add the following WEB setting. Enable CDP Configuration File Reference Selects whether to enable the CDP feature. es o o CDP_EABLE Packet Interval Configuration File Reference Specifies the interval, in seconds, between sending CDP frames CDP_ITERVAL Call Control Add the following WEB setting. Group Call Pickup Configuration File Reference Specifies the feature number for performing group call pickup. 4 digits ( 9, *, #) ot stored. UM_PLA_PICKUP_GROUP Private Hold Configuration File Reference Selects whether to enable or disable private hold. es o o PRIVATE_HOLD_EABLE

12 System Settings AUTO_IPUT_KE_TIME ITEGER Specifies the number of seconds after which the cursor automatically moves to the next position during character input. 3 [: off] CALL_SETTIGS_MEU_EABLE Specifies whether the "Call Settings" setting is displayed in MEU. : Displayed : ot displayed DISCLOSE_FUCTIO_EABLE Specifies whether to disclose functions and some keys for HOTEL telephones. : Enable to disclose : Disable VM_FUCTIO_EABLE Specifies whether Voice Mail function is enable. : Enable Voice Mail function : Disable DELA_RIG_TIME_n Parameter ame Example DELA_RIG_TIME_1, DELA_RIG_TIME_2,,DELA_RIG_TIME_8 ITEGER Specifies the length of time, in seconds, until the unit rings. 3 : Disable OFF_HOOK_MOITOR_EABLE Specifies whether to enable or disable the Off-hook Monitor function.(kx-tpa65 only) : Enable Off-hook Monitor : Disable

13 PRIVATE_HOLD_EABLE Web User Interface Reference Specifies whether to enable or disable private hold. : Enable private hold : Disable Private Hold COF_OWER_OUT_EABLE Specifies whether to allow the remaining two parties in a three-party conference to continue the conversation if the conference originator leaves the conference call (Unattended Conference). : Enable Unattended Conference : Disable PCAP_EABLE Specifies whether to enable or disable packet capturing using the Wireshark utility (PCAP Remote). : Enable PCAP Remote : Disable PCAP_REMOTE_ID STRIG Specifies the ID of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote) characters Empty string PCAP_REMOTE_PASS STRIG Specifies the password of the IP phone whose packets will be captured using the Wireshark utility (PCAP Remote)., 6 64 characters Empty string PCAP_REMOTE_PORT ITEGER Specifies the port of the IP phone to use for capturing packets using the Wireshark utility (PCAP Remote)

14 DTMF_OUT_EABLE Specifies whether received outband DTMF signals are output audibly. : Enable audible outband DTMF : Disable CACEL_OPERATIO_MODE ITEGER Specifies the operation of the [CACEL] button when a line is in use. : Cancel the current operation 1: Return to standby mode RAGE_ALARM_EABLE Specifies whether to enable or disable the range alarm. : Enable the range alarm : Disable Ethernet Port Settings CDP_EABLE Web User Interface Reference Specifies whether to enable the CDP feature. : Enable CDP : Disable Enable CDP CDP_ITERVAL Web User Interface Reference ITEGER Specifies the interval, in seconds, between sending CDP frames Packet Interval

15 TR-69 Settings TR69_REGISTERIG STRIG Specifies the line status that TR-69 outputs while the line is being registered. Max.16 characters Error TR69_REGISTERED STRIG Specifies the line status that TR-69 outputs when the line has been registered. Max.16 characters Registering XML Settings XML_PHOEBOOK_URL STRIG Specifies the URL to download the XML phonebook file from. Max.256 characters Empty string XML_PHOEBOOK_CCLIC_ITVL ITEGER Specifies the interval, in minutes, between periodic checks for updates to the XML phonebook. If this parameter is set to "", the timing is the same as that for updating the configuration files., XMLAPP_SELECT_HS_PB Specifies whether to download an individual XML phonebook for each handset. : Enable individual phonebooks : Disable

16 SIP Settings SIP_183_TALK_EABLE Specifies whether the unit's sate is "Talking" or "Calling" when it receives a SIP 183 message. : Talking : Calling SRTP Settings DISPLA_SRTP_CALL_EABLE Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP). : Display an icon for encrypted calls : Disable uacsta Settings UACSTA_EABLE_n Parameter ame Example UACSTA_EABLE_1, UACSTA_EABLE_2,,UACSTA_EABLE_8 Selects whether to enable or disable the uacsta feature. : Enable : Disable Telephone Settings UM_PLA_PICKUP_GROUP Web User Interface Reference STRIG Specifies the feature number for performing group call pickup. 4 digits ( 9, *, #) Empty string Group Call Pickup

17 SOFT_KE_LABELx STRIG x=1-3 Specifies the text of the soft keys displayed on the screen for quick dialing. ote This setting is available only when "DISCLOSE_FUCTIO_EABLE" is set to "". Max. 5 characters SOFT_KE_LABEL1: 1 SOFT_KE_LABEL2: 2 SOFT_KE_LABEL3: 3 SOFT_KE_QUICK_DIALx STRIG x=1-3 Specifies quick-dial numbers to assign to the soft keys. ote This setting is available only when "DISCLOSE_FUCTIO_EABLE" is set to "". Max. 32 characters Empty string Call Control Settings DIALPLA_REPLACE_LOG_EABLE Specifies whether to log the number after it was modified by the Dial Plan or the number as it was input. : Log the number in the outgoing call log after it was modified by the Dial Plan : Log the number in the outgoing call log as it was input DIALPLA_MEMOR_DIAL_EABLE Specifies whether to enable Dial Plan processing for memory dialing. : Enable Dial Plan : Disable SIGALIG_AUTO_AS_EABLE_n Parameter ame Example SIGALIG_AUTO_AS_EABLE_1, SIGALIG_AUTO_AS_EABLE_2,, SIGALIG_AUTO_AS_EABLE_8 Specifies whether to enable paging mode with "Click to Dial". : Enable : Disable

18 Logging Settings SSLOG_OUT_START Specifies whether to enable or disable exporting of the Application Log : Enable export to syslog : Disable

19 KX TGP6 Software File Version 3. or later VoIP Settings [Line 1] [Line 8] Change the in " SRTP Mode" on page 136. (Before) SRTP RTP/SRTP ote When RTP/SRTP is selected, operation is in RTP mode. (After) :SRTP 1:RTP/SRTP 2:Panasonic Original 3:SRTP/RTP ote : Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Call Control Add the following WEB setting. Missed Call otification - Message Configuration File Reference Selects whether to display 'Missed calls' on the screen in standby mode. es o es OTIF_MISSEDCALL_EABLE_HSy Missed Call otification - LED Configuration File Reference Selects whether the LED is used to indicate a missed call es o es OTIF_MISSEDCALL_LED_EABLE_HSy Voice Message otification - Message Configuration File Reference Selects whether to display 'Voice MSG' on the screen in standby mode. es o es OTIF_VOIC _EABLE_HSy

20 Voice Message otification - LED Configuration File Reference Selects whether the LED is used to indicate a new voice message. es o es OTIF_VOIC _LED_EABLE_HSy Voice Message otification - Alarm Configuration File Reference Selects whether an alarm sound is used to indicate a new voice message. es o es OTIF_VOIC _ALARM_EABLE_HSy System Settings OTIFICATIO_MEU_EABLE Specifies whether to display the notification settings under MEU. : Display the notification settings : Do not display OTIF_MISSEDCALL_EABLE_HSy Parameter ame Example Web User Interface Reference OTIF_MISSEDCALL_EABLE_HS1,OTIF_MISSEDCALL_EABLE_HS2,, OTIF_MISSEDCALL_EABLE_HS8 Specifies whether to display 'Missed calls' on the screen in standby mode. : Enable displaying 'Missed calls' in standby mode. : Disable Missed Call otification - Message OTIF_VOIC _EABLE_HSy Parameter ame Example Web User Interface Reference OTIF_VOIC _EABLE_HS1,OTIF_VOIC _EABLE_HS2,, OTIF_VOIC _EABLE_HS8 Specifies whether to display 'Voice MSG' on the screen in standby mode. : Enable displaying 'Voice MSG' in standby mode. : Disable Voice Message otification - Message

21 OTIF_MISSEDCALL_LED_EABLE_HSy Parameter ame Example Web User Interface Reference OTIF_MISSEDCALL_LED_EABLE_HS1,OTIF_MISSEDCALL_LED_EABLE_HS2,,OTIF_MISSEDCALL_LED_EABLE_HS8 Specifies whether the LED is used to indicate a missed call : Enable LED indication for a missed call. : Disable Missed Call otification - LED OTIF_VOIC _LED_EABLE_HSy Parameter ame Example Web User Interface Reference OTIF_VOIC _LED_EABLE_HS1,OTIF_VOIC _LED_EABLE_HS2,,OTIF_VOIC _LED_EABLE_HS8 Specifies whether the LED is used to indicate a new voice message. : Enable LED indication for voice messages. : Disable Voice Message otification - LED OTIF_VOIC _ALARM_EABLE_HSy Parameter ame Example Web User Interface Reference OTIF_VOIC _ALARM_EABLE_HS1,OTIF_VOIC _ALARM_EABLE_HS2,,OTIF_VOIC _ALARM_EABLE_HS8 Specifies whether an alarm sound is used to indicate a new voice message. : Enable alarms for voice messages. : Disable Voice Message otification - Alarm OTIFICATIO_ALARM_TPE ITEGER Specifies whether a voice mail alarm notification is used only the first time or every time. : First time only 1: Every time BOOTLOG_SERVER_URI STRIG Specifies the URI for a boot logging server. Max. 256 characters Empty string

22 etwork Phonebook (Common) W_PHOEBOOK_ADVACED_SERACH Specifies whether to perform a narrowing search with the LDAP phonebook. : Enable : Disable SRTP Settings Change the in " SRTP_COECT_MODE_n " on page 269. (Before) : SRTP 1: RTP/SRTP ote : Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. (After) : SRTP 1: RTP/SRTP 2: SRTP & RTP (Panasonic PBX only) 3: SRTP & RTP (RTP/AVP, a=crypto) ote : Use only SRTP for outgoing and incoming calls. 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls. 2: Use RTP or SRTP for both outgoing and incoming calls. This value is valid only when the unit is connected to a Panasonic PBX. "SRTP_MIX_TRASFER_EABLE_n" mustalso be set to "". 3: If you are using "RTP/AVP" and append "a=crypto", and the response message includes "a=crypto", the conversation will be established with SRTP. If "a=crypto" is not included, the conversation will be established with RTP Telephone Settings HADSET_VOLUME_LEVEL ITEGER Specifies the handset receiver's volume level HEADSET_VOLUME_LEVEL ITEGER Specifies the headset receiver's volume level

23 SPEAKER_VOLUME_LEVEL ITEGER Specifies the speaker receiver's volume level

24 KX TGP6 Software File Version 3.1 or later TWAMP Settings Add the TWAMP Settings to the [etwork] tab of Web User Interface Programming. Add the following web settings to the TWAMP settings. Enable TWAMP Configuration File Reference Selects whether to enable the TWAMP server function. es o o TWAMP_EABLE Control Port Configuration File Reference Specifies the port for the TWAMP control session TWAMP_COTROL_PORT Test Port Configuration File Reference Specifies the port for the TWAMP test session TWAMP_TEST_PORT Wait Time for Control Configuration File Reference Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session TWAMP_SERVER_WAIT_TIME Wait Time for Reflector Configuration File Reference Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session TWAMP_REFLECTOR_WAIT_TIME

25 System Settings OISE_SUPPRESSOR_EABLE Specifies whether to enable the noise suppressor. : Enable the noise suppressor : Disable TWAMP Settings Add the TWAMP Settings to Configuration File Programming. Add the following configuration parameter to the TWAMP settings. TWAMP_EABLE Web User Interface Reference Specifies whether to enable the TWAMP server function. : Enable the TWAMP server function : Disable Enable TWAMP TWAMP_COTROL_PORT Web User Interface Reference ITEGER Specifies the port for the TWAMP control session Control Port TWAMP_TEST_PORT Web User Interface Reference ITEGER Specifies the port for the TWAMP test session Test Port TWAMP_SERVER_WAIT_TIME Web User Interface Reference ITEGER Specifies the time, in seconds, for the TWAMP server to wait for incoming packets for maintaining the session Wait Time for Control

26 TWAMP_REFLECTOR_WAIT_TIME Web User Interface Reference ITEGER Specifies the time, in seconds, for the TWAMP reflector to wait for incoming packets for maintaining the session Wait Time for Reflector TWAMP_PADDIG_ZERO Specifies the packet padding for the TWAMP test session. : All zeros : Random

27 KX TGP6 Software File Version 4. or later System Settings Add the following configuration parameters. CODEC_VAD_CG_EABLE Specifies whether to enable the VAD and CG functions. (VAD :Voice Activity Detector, CG: Comfort oise Generator) : Enable the VAD and CG functions : Disable ERROR_AUTO_REBOOT_TIME ITEGER Specifies the amount of time, in hours, until the unit automatically reboots when the SIP registration has been removed for all accounts., 1-72 (: Disable) Provisioning Settings CFG_BOOTUP_DURATIO_EABLE Specifies whether to enable "CFG_RESC_TIME" and "CFG_RESC_DURATIO" at startup. : Enable : Disable SIP Settings SIP_DSSRV_EA_APTR_n Parameter ame Example SIP_DSSRV_EA_APTR_1, SIP_DSSRV_EA_APTR_2,,SIP_DSSRV_EA_APTR_8 Specifies whether to enable the use of the APTR sequence. : Enable : Disable

28 Telephone Settings RIGER_VOLUME_LEVEL ITEGER Specifies the value of the ringer volume RIGER_VOL_OPERATIO_EABLE Specifies whether to enable ringer volume adjustment. : Enable ringer volume adjustment : Disable Call Control Settings TALKIG_SOFT_KE_A ITEGER Specifies the display icon of soft key A during a call. : Original 1: Mute 2: Menu 3: Blind transfer 4: Redial 5: Conference 6: Flash/Recall 7: Incoming Log 8: Outgoing Log 9: Phonebook 1: Call Park 11: Intercom 12: Pause 13: oise Reduction 14: Private Hold TALKIG_SOFT_KE_B ITEGER Specifies the display icon of soft key B during a call. : Original 1: Mute 2: Menu 3: Blind transfer 4: Redial 5: Conference 6: Flash/Recall 7: Incoming Log 8: Outgoing Log 9: Phonebook 1: Call Park 11: Intercom 12: Pause 13: oise Reduction 14: Private Hold

29 TALKIG_SOFT_KE_C ITEGER Specifies the display icon of soft key C during a call. : Original 1: Mute 2: Menu 3: Blind transfer 4: Redial 5: Conference 6: Flash/Recall 7: Incoming Log 8: Outgoing Log 9: Phonebook 1: Call Park 11: Intercom 12: Pause 13: oise Reduction 14: Private Hold PQX8311TA PP316SM617